limbo5

Limbo Emulator (QEMU) for Android

================================================================================

1. What is Limbo?

Limbo is a QEMU-based emulator for Android. It currently supports PC emulation for Intel x86 architecture. For more information, instructions, guides, known issues, and downloads visit: https://github.com/limboemu/limbo

===============================================================================

2. Requirements:

   Android SDK Android NDK r14b/gcc (clang is optional but generates slower runtime binaries) Android Studio (3.1.1 prefered) Android device with Android OS 5.0 (Lollipop) and above Linux Desktop pc (Ubuntu prefered) Make sure you have the following packages installed, if not run: sudo apt-get install make autoconf automake git python binutils libtool-bin pkg-config flex bison

===============================================================================

3. Known Issues: https://github.com/limboemu/limbo/issues

=============================================================================== 4. Setup Environment

a. Update variables for paths to NDK directories for your Build Environment
 in ./limbo-android-lib/src/main/jni/android-limbo-config.mak
 
b. Configure your PATH variable add the NDK Directory so makefile can find ndk-build
Examples:
For bash:
export PATH=$PATH:/home/dev/tools/ndk/android-ndk-r14b

5. Get and Patch libraries

#Make sure you're under the jni directory
cd ./limbo-android-lib/src/main/jni

#Note: if some of these file links don't download with wget use your browser to download them

##### Get QEMU
wget http://download.qemu-project.org/qemu-5.1.0.tar.xz -P /tmp/
tar -xJf /tmp/qemu-5.1.0.tar.xz
mv qemu-5.1.0 qemu

##### GET glib
wget https://ftp.gnome.org/pub/GNOME/sources/glib/2.56/glib-2.56.1.tar.xz -P /tmp/
tar -xJf /tmp/glib-2.56.1.tar.xz
mv glib-2.56.1 glib

##### GET libffi
wget https://sourceware.org/pub/libffi/libffi-3.2.1.tar.gz -P /tmp/
tar -xzf /tmp/libffi-3.2.1.tar.gz
mv libffi-3.2.1 libffi

##### GET pixman
wget https://www.cairographics.org/releases/pixman-0.34.0.tar.gz -P /tmp/
tar -xzf /tmp/pixman-0.34.0.tar.gz
mv pixman-0.34.0 pixman

##### GET SDL2
wget https://www.libsdl.org/release/SDL2-2.0.8.tar.gz -P /tmp/
tar -xzf /tmp/SDL2-2.0.8.tar.gz
mv SDL2-2.0.8 SDL2

Now you should have this directory structure:
jni/
    android-config/
    compat/
    glib/
    libffi/
    limbo/
    patches/
    pixman/
    qemu/
    SDL2/


### Apply patch for QEMU 5.1.0:
Make sure the following line is uncommented in android-qemu-config.mak
include android-qemu-config-5.1.0.mak
Apply the patch on the terminal:
cd ./limbo-android-lib/src/main/jni/qemu/
patch -p1 < ../patches/qemu-5.1.0.patch

# for QEMU versions 4 and above you can enable MTTCG on the ui
# this will only work if your android device is 64bit
modify Config.java:
    set to true: public static boolean enableMTTCG = true;

### Apply glib patch for Limbo:
cd ./limbo-android-lib/src/main/jni/glib/
patch -p1 < ../patches/glib-2.56.1.patch

### Other QEMU versions:
# If you want to distribute Limbo build with other QEMU versions, create your own patch like this:
cd /limbo-android-lib/src/main/jni/qemu/
diff -ru --no-dereference /tmp/qemu-x.x.x . | grep -v '^Only in' > ../patches/qemu-x.x.x.patch
Don't forget to create your android-qemu-config-x.x.x.mak file
  and include it in android-qemu-config.mak

=============================================================================== 5. Build

a. To build the NDK part of the app make sure you're under the jni directory:
    cd limbo-android-lib/src/main/jni

Make sure you update the android-config/android-limbo-config.mak file with the NDK path you have installed:
NDK_ROOT = /home/dev/tools/ndk/android-ndk-r14b

b. From Android Studio import BOTH the Android library limbo-android-lib AND the module for the guest
    architecture you need (x86,arm,ppc,sparc) ie limbo-android-x86.
    
c. Build the native libraries:
    cd limbo-android-lib/src/main/jni:

    To build Limbo Emulator:
        export BUILD_HOST=<EABI>
        export BUILD_GUEST=<GUEST_ARCH>
        export NDK_DEBUG=<ENABLE_DEBUG>
        make limbo

    where:
        EABI is the Android device type (host arch): armeabi-v7a, arm64-v8a, x86, x86_64
        GUEST_ARCH is the Emulator type: x86_64-softmmu,aarch64-softmmu,sparc64-softmmu, ppc64-softmmu
        ENABLE_DEBUG is 1 (optional)

    If you want to remove ALL previously compiled native objects and libraries:
    make clean

    If you're building apk for multiple host architectures you need to do in betweeen builds:
    make distclean

    If you're building apk for multiple guest architectures you can specify them with commas:
    BUILD_GUEST=x86_64-softmmu,aarch64-softmmu

    Examples:
    1) To build Limbo x86 Emulator for ARM64 phones type:
        export BUILD_HOST=arm64-v8a
        export BUILD_GUEST=x86_64-softmmu
        make limbo

    2) To build Limbo x86 Emulator for ARM phones type:
        export BUILD_HOST=armeabi-v7a
        export BUILD_GUEST=x86_64-softmmu
        make limbo

    3) To build Limbo ARM Emulator for ARM64 phones type:
        export BUILD_HOST=arm64-v8a
        export BUILD_GUEST=aarch64-softmmu
        make limbo

    4) To build Limbo x86 Emulator for Intel x86 32bit phones/tablets/PCs type:
        export BUILD_HOST=x86
        export BUILD_GUEST=x86_64-softmmu
        make limbo

    5) To build Limbo x86 Emulator for Intel x86 64bit PCs type:
        export BUILD_HOST=x86_64
        export BUILD_GUEST=x86_64-softmmu
        make limbo

    6) To build Limbo ARM Emulator for ARM64 phones for debugging type:
        export NDK_DEBUG=1
        export BUILD_HOST=arm64-v8a
        export BUILD_GUEST=aarch64-softmmu
        make limbo

    7) To build multiple Limbo emulators for ARM phones type:
        export BUILD_HOST=arm64-v8a
        export BUILD_GUEST=x86_64-softmmu,aarch64-softmmu
        make limbo

   You should now have the following libraries in these 2 folders:

   limbo-android-lib/src/main/jniLibs/<EABI>/
     libcompat-iconv.so
     libcompat-intl.so
     libcompat-limbo.so
     libcompat-SDL2-ext.so
     libglib-2.0.so
     liblimbo.so
     libpixman-1.so
     libSDL2.so

   limbo-android-<GUEST_ARCH>/src/main/jniLibs/<EABI>/
     libqemu-system-xxx.so

    Note:
        When you build the apk in Android Studio it will contain the libraries from both
        folders so you don't need to copy files manually.

d. Build the Android apk for the corresponding guest using Android Studio.
    Make sure the *.so libraries are zipped in the final .apk

e. If you want to build the debugging version:
    Set variables in Config.java:
      debug = true;
    Modify android-config/android-limbo-config.mak and point to a configuration
      with no optimization:
    USE_OPTIMIZATION=false

    Follow the steps to build the native libraries as described above
    export NDK_DEBUG=1

    Important:
       From Android studio click Build> Rebuild Project and Run > Debug
     
f. To debug the native code for a particular guest:

    # for x86 guest and ARM64 phone:
    export BUILD_HOST=arm64-v8a
    export BUILD_GUEST=x86_64-softmmu
    make ndk-gdb PKG_NAME=com.limbo.emu.main

    # for other guests use respectively:
    make ndk-gdb PKG_NAME=com.limbo.emu.main.arm
	make ndk-gdb PKG_NAME=com.limbo.emu.main.sparc
	make ndk-gdb PKG_NAME=com.limbo.emu.main.ppc

    Note: you might want to disable signal handling in gdb:
    handle all nostop noprint

    To catch a SIGSEGV:
    handle 11 stop print

    Useful commands:
    To set breakpoints:       b <file.c>:<code_line>
    To step statement:        s
    To go to next statement:  n
    To continue:              c
    To halt(interrupt):       ctrl-c
    To see stack (backtrace): bt

=============================================================================== 6. Development

a. Codes Changes for Android compatibility are in patch files marked with __ANDROID__

b. Similarly for LIMBO functionality code changes are tagged with __LIMBO__

c. Important Configuration files (You'll need to update this with the NDK path before compiling):
    limbo-android-lib/src/main/jni/android-config/android-limbo-config.mak

d. Advanced QEMU config files:
    limbo-android-lib/src/main/jni/android-config/android-qemu-config.mak

d. Advanced Device Configuration files:
    limbo-android-lib/src/main/jni/android-config/android-device-config/*.mak

e. Important Makefiles:
    limbo-android-lib/src/main/jni/Makefile
    limbo-android-lib/src/main/jni/Android.mk
    limbo-android-lib/src/main/jni/Application.mk
    limbo-android-lib/src/main/jni/android-limbo-build.mak
    limbo-android-lib/src/main/jni/android-qemu-build.mak

f. Frontend UI options configuration see: Config.java
    

=============================================================================== 7. Run

a. Installing a full Qwerty keyboard for Android like Hacker's keyboard 
    from the Google Android store. Make sure you use Transparent theme 
    and Direct Draw found under Theme settings.
b. Start the Limbo app and choose CPU, Memory (~8-64MB),etc..
c. Choose a bootable disk image(s) for CDRom, Floppy, and a HDD image
d. Start the virtual machine.
e. For more instructions and guides visit: 
    https://github.com/limboemu/limbo
f. Have fun!

=============================================================================== 8. Changelog See limbo-android-lib/src/main/assets/CHANGELOG for release notes

=============================================================================== 9. License

Limbo PC Emulator is released under GPL v2 License. All icons unders /res are from Gnome Project (GPL v2 License) See file COPYING under root directory and LICENSE under limbo-android-lib/src/main/assets

Other source included are released under their own license please view Licenses under each subdirectory

===============================================================================

Endofdoc