femtocom

Prerequirements

• modern GNU/Linux distro;
• picocom
  ;
• configuration line for every device of interest in custom rules file for
  udev
  ;
• femtocom
  script;
• configuration file for
  femtocom
  .

picocom

Install picocom:

• using package manager of your distribution like:

$ sudo  apt  install  picocom

or

$ sudo  dnf  install  picocom

(or something similar)

• using sources:

$ git  clone  https://github.com/npat-efault/picocom
$ cd  picocom
$ make

udev rule

• add custom rule for a compatible device:

SUBSYSTEM=="tty", ATTRS{bcdDevice}=="____", ATTRS{idProduct}=="____", ATTRS{idVendor}=="____", MODE="0664", GROUP="plugdev", SYMLINK+="CUSTOM_NAME"

• restart
  udev
  to apply changes:

$ sudo  udevadm  control --reload-rules  &&  sudo  udevadm  trigger

femtocom

• download the script:

$ wget  https://github.com/ia/femtocom/raw/main/femtocom

• set executable bit for the downloaded script:

$ chmod  a+x  femtocom

• put the downloaded script to the directory like
  /usr/local/bin
  or a similar one which is in
  PATH
  shell variable:

$ mv  femtocom  DIRECTORY_WITH_BINS_INCLUDED_IN_PATH_VARIABLE

femtocom config

• create file
  ~/.femtocomrc
  :

$ touch ~/.femtocomrc

• add default section to the config:

[default]
	baud=115200
	databits=8
	parity=n
	flow=n
	stopbits=1
	omap=crlf
	port=/dev/ttyUSB0

• add per-device section for a compatible device, i.e.:

[CUSTOM_NAME]
	baud=115200
	databits=8
	parity=n
	flow=n
	stopbits=1

Testing a setup

• connect a device;
• just run:
  • to use default settings:
    
    $ femtocom default
  • to use a device specific settings:
    
    $ femtocom CUSTOM_NAME
• if everything is configured properly, then shell to a target device will be initialized:

$ femtocom hw

====>>>> exit: hold CTRL and press: A X

====>>>> picocom --baud 115200 --databits 8 --parity n --flow n --stopbits 1 /dev/hw

picocom v3.2a

port is        : /dev/hw
flowcontrol    : none
baudrate is    : 115200
parity is      : none
databits are   : 8
stopbits are   : 1
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
hangup is      : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv -E
imap is        : 
omap is        : 
emap is        : crcrlf,delbs,
logfile is     : none
initstring     : none
exit_after is  : not set
exit is        : no

Type [C-a] [C-h] to see available commands
Terminal ready

> help
Available commands
...