libraries/AP_Notify/RCOutputRGBLed.cpp - master - Sangak/ardupilot

libraries/AP_Notify/RCOutputRGBLed.cpp
100 строк3 KB
Peter Barker
AP_Notify: stop using linux board subtype in Notify LED setup
16 июл 2024, 03:11
16 июл 2024, 03:11501d0d8
/*
 * Copyright (C) 2015  Intel Corporation. All rights reserved.
 *
 * This file is free software: you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This file is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 * See the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "AP_Notify_config.h"

#if AP_NOTIFY_RCOUTPUTRGBLED_LED_ENABLED

#include "RCOutputRGBLed.h"

#include <AP_Math/AP_Math.h>
#include <SRV_Channel/SRV_Channel.h>

extern const AP_HAL::HAL& hal;

#define LED_OFF 0
#define LED_FULL_BRIGHT 255
#define LED_MEDIUM ((LED_FULL_BRIGHT / 5) * 4)
#define LED_DIM ((LED_FULL_BRIGHT / 5) * 2)

RCOutputRGBLed::RCOutputRGBLed(uint8_t red_channel, uint8_t green_channel, uint8_t blue_channel)
    : RCOutputRGBLed(red_channel, green_channel, blue_channel, LED_OFF,
                     LED_FULL_BRIGHT, LED_MEDIUM, LED_DIM)
{
}

RCOutputRGBLed::RCOutputRGBLed(uint8_t red_channel, uint8_t green_channel,
                               uint8_t blue_channel, uint8_t led_off,
                               uint8_t led_full, uint8_t led_medium,
                               uint8_t led_dim)
    : RGBLed(led_off, led_full, led_medium, led_dim)
    , _red_channel(red_channel)
    , _green_channel(green_channel)
    , _blue_channel(blue_channel)
{
}

bool RCOutputRGBLed::init()
{
    hal.rcout->enable_ch(_red_channel);
    hal.rcout->enable_ch(_green_channel);
    hal.rcout->enable_ch(_blue_channel);

    return true;
}

uint16_t RCOutputRGBLed::get_duty_cycle_for_color(const uint8_t color, const uint16_t usec_period) const
{
    return  usec_period * color / _led_bright;
}

#if AP_NOTIFY_RCOUTPUTRGBLEDINVERTED_LED_ENABLED
uint16_t RCOutputRGBLedInverted::get_duty_cycle_for_color(const uint8_t color, const uint16_t usec_period) const
{
    return  usec_period * (255 - color) / _led_bright;
}
#endif  // AP_NOTIFY_RCOUTPUTRGBLEDINVERTED_LED_ENABLED


bool RCOutputRGBLed::hw_set_rgb(uint8_t red, uint8_t green, uint8_t blue)
{
    const uint16_t freq_motor = hal.rcout->get_freq(0);
    const uint16_t freq = hal.rcout->get_freq(_red_channel);
    const uint16_t usec_period = hz_to_usec(freq);

    if (freq_motor != freq) {
        /*
         * keep at same frequency as the first RCOutput channel, some RCOutput
         * drivers can not operate in different frequency between channels
         */
        const uint32_t mask = 1 << _red_channel | 1 << _green_channel
                              | 1 << _blue_channel;
        hal.rcout->set_freq(mask, freq_motor);
    }

    uint16_t usec_duty = get_duty_cycle_for_color(red, usec_period);
    SRV_Channels::set_output_pwm_chan(_red_channel, usec_duty);

    usec_duty = get_duty_cycle_for_color(green, usec_period);
    SRV_Channels::set_output_pwm_chan(_green_channel, usec_duty);

    usec_duty = get_duty_cycle_for_color(blue, usec_period);
    SRV_Channels::set_output_pwm_chan(_blue_channel, usec_duty);

    return true;
}
#endif  // AP_NOTIFY_RCOUTPUTRGBLED_LED_ENABLED