stud_22-365/GLXEngine: GaLaXy Engine - пакеты компонентов GLScene & GXScene для Object Pascal и C++. Включает иерархию классов для создания 3D сцен с менеджерами поддержки физики Newton, звука BASS и шейдеров GLSL. Кросс-платформенный фреймворк с объектами на базе OpenGL и Vulkan.

Source/GLS.PerlinPFX.pas
447 строк12 KB
GLScene
TVector from GLS.VectorGeometry renamed to TGLVector to be able use TVector from System.Math.Vectors without conflicts of names
09 мар 2021, 22:55
09 мар 2021, 22:5578258c3
//
// The graphics rendering engine GLScene http://glscene.org
//

unit GLS.PerlinPFX;

(* PFX particle effects revolving around the use of Perlin noise *)

interface

{$I GLScene.inc}

uses
  Winapi.OpenGL,
  System.Classes,
  System.Math,

  GLS.OpenGLTokens,
  GLS.ParticleFX,
  GLS.Graphics,
  GLS.VectorTypes,
  GLS.VectorGeometry;


const
  cPERLIN_TABLE_SIZE = 256; // must be a power of two

type
  (* A sprite-based particles FX manager using perlin-based sprites.
    This PFX manager is more suited for smoke or fire effects, and with proper
    tweaking of the texture and perlin parameters, may help render a convincing
    effect with less particles.
    The sprite generate by this manager is the composition of a distance-based
    intensity and a perlin noise. *)
  TGLPerlinPFXManager = class(TGLBaseSpritePFXManager)
  private
    FTexMapSize: Integer;
    FNoiseSeed: Integer;
    FNoiseScale: Integer;
    FNoiseAmplitude: Integer;
    FSmoothness: Single;
    FBrightness, FGamma: Single;
  protected
    procedure PrepareImage(bmp32: TGLBitmap32; var texFormat: Integer); override;
    procedure SetTexMapSize(const val: Integer);
    procedure SetNoiseSeed(const val: Integer);
    procedure SetNoiseScale(const val: Integer);
    procedure SetNoiseAmplitude(const val: Integer);
    procedure SetSmoothness(const val: Single);
    procedure SetBrightness(const val: Single);
    procedure SetGamma(const val: Single);
  public
    constructor Create(aOwner: TComponent); override;
    destructor Destroy; override;
  published
    (* Underlying texture map size, as a power of two.
      Min value is 3 (size=8), max value is 9 (size=512). *)
    property TexMapSize: Integer read FTexMapSize write SetTexMapSize default 6;
    (* Smoothness of the distance-based intensity.
      This value is the exponent applied to the intensity in the texture,
      basically with a value of 1 (default) the intensity decreases linearly,
      with higher values, it will remain 'constant' in the center then
      fade-off more abruptly, and with values below 1, there will be a
      sharp spike in the center. *)
    property Smoothness: Single read FSmoothness write SetSmoothness;
    (* Brightness factor applied to the perlin texture intensity.
      Brightness acts as a scaling, non-saturating factor. Examples:
      Brightness = 1 : intensities in the [0; 1] range
      Brightness = 2 : intensities in the [0.5; 1] range
      Brightness = 0.5 : intensities in the [0; 0.5] range
      Brightness is applied to the final texture (and thus affects
      the distance based intensity). *)
    property Brightness: Single read FBrightness write SetBrightness;
    property Gamma: Single read FGamma write SetGamma;
    // Random seed to use for the perlin noise. 
    property NoiseSeed: Integer read FNoiseSeed write SetNoiseSeed default 0;
    // Scale applied to the perlin noise (stretching). 
    property NoiseScale: Integer read FNoiseScale write SetNoiseScale default 100;
    (* Amplitude applied to the perlin noise (intensity).
      This value represent the percentage of the sprite luminance affected by
      the perlin texture. *)
    property NoiseAmplitude: Integer read FNoiseAmplitude write SetNoiseAmplitude default 50;
    property ColorMode default scmInner;
    property SpritesPerTexture default sptFour;
    property ParticleSize;
    property ColorInner;
    property ColorOuter;
    property LifeColors;
  end;

  (* Generates Perlin Noise in the [-1; 1] range.
    2D noise requests are taken in the Z=0 slice *)
  TGLPerlin3DNoise = class(TObject)
  protected
    FPermutations: packed array [0 .. cPERLIN_TABLE_SIZE - 1] of Integer;
    FGradients: packed array [0 .. cPERLIN_TABLE_SIZE * 3 - 1] of Single;
  protected
    function Lattice(ix, iy, iz: Integer; fx, fy, fz: Single): Single; overload;
    function Lattice(ix, iy: Integer; fx, fy: Single): Single; overload;
  public
    constructor Create(randomSeed: Integer);
    procedure Initialize(randomSeed: Integer);
    function Noise(const x, y: Single): Single; overload;
    function Noise(const x, y, z: Single): Single; overload;
    function Noise(const v: TAffineVector): Single; overload;
    function Noise(const v: TGLVector): Single; overload;
  end;


// ------------------------------------------------------------------
implementation
// ------------------------------------------------------------------

// ------------------
// ------------------ TGLPerlinPFXManager ------------------
// ------------------

constructor TGLPerlinPFXManager.Create(aOwner: TComponent);
begin
  inherited;
  FTexMapSize := 6;
  FNoiseScale := 100;
  FNoiseAmplitude := 50;
  FSmoothness := 1;
  FBrightness := 1;
  FGamma := 1;
  SpritesPerTexture := sptFour;
  ColorMode := scmInner;
end;

destructor TGLPerlinPFXManager.Destroy;
begin
  inherited Destroy;
end;

procedure TGLPerlinPFXManager.SetTexMapSize(const val: Integer);
begin
  if val <> FTexMapSize then
  begin
    FTexMapSize := val;
    if FTexMapSize < 3 then
      FTexMapSize := 3;
    if FTexMapSize > 9 then
      FTexMapSize := 9;
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetNoiseSeed(const val: Integer);
begin
  if val <> FNoiseSeed then
  begin
    FNoiseSeed := val;
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetNoiseScale(const val: Integer);
begin
  if val <> FNoiseScale then
  begin
    FNoiseScale := val;
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetNoiseAmplitude(const val: Integer);
begin
  if val <> FNoiseAmplitude then
  begin
    FNoiseAmplitude := val;
    if FNoiseAmplitude < 0 then
      FNoiseAmplitude := 0;
    if FNoiseAmplitude > 100 then
      FNoiseAmplitude := 100;
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetSmoothness(const val: Single);
begin
  if FSmoothness <> val then
  begin
    FSmoothness := ClampValue(val, 1E-3, 1E3);
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetBrightness(const val: Single);
begin
  if FBrightness <> val then
  begin
    FBrightness := ClampValue(val, 1E-3, 1E3);
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.SetGamma(const val: Single);
begin
  if FGamma <> val then
  begin
    FGamma := ClampValue(val, 0.1, 10);
    NotifyChange(Self);
  end;
end;

procedure TGLPerlinPFXManager.PrepareImage(bmp32: TGLBitmap32; var texFormat: Integer);

  procedure PrepareSubImage(dx, dy, s: Integer; noise: TGLPerlin3DNoise);
  var
    s2: Integer;
    x, y, d: Integer;
    is2, f, fy, pf, nBase, nAmp, df, dfg: Single;
    invGamma: Single;
    scanLine: PGLPixel32Array;
    gotIntensityCorrection: Boolean;
  begin
    s2 := s shr 1;
    is2 := 1 / s2;
    pf := FNoiseScale * 0.05 * is2;
    nAmp := FNoiseAmplitude * (0.01);
    nBase := 1 - nAmp * 0.5;

    if Gamma < 0.1 then
      invGamma := 10
    else
      invGamma := 1 / Gamma;
    gotIntensityCorrection := (Gamma <> 1) or (Brightness <> 1);

    for y := 0 to s - 1 do
    begin
      fy := Sqr((y + 0.5 - s2) * is2);
      scanLine := bmp32.scanLine[y + dy];
      for x := 0 to s - 1 do
      begin
        f := Sqr((x + 0.5 - s2) * is2) + fy;
        if f < 1 then
        begin
          df := nBase + nAmp * noise.noise(x * pf, y * pf);
          if gotIntensityCorrection then
            df := EnsureRange(Power(df, invGamma) * Brightness, 0, 1);
          dfg := EnsureRange(Power((1 - Sqrt(f)), FSmoothness), 0, 1);
          d := Trunc(df * 255);
          if d > 255 then
            d := 255;
          with scanLine^[x + dx] do
          begin
            r := d;
            g := d;
            b := d;
            a := Trunc(dfg * 255);
          end;
        end
        else
          PInteger(@scanLine[x + dx])^ := 0;
      end;
    end;
  end;

var
  s, s2: Integer;
  noise: TGLPerlin3DNoise;
begin
  s := (1 shl TexMapSize);
  bmp32.Width := s;
  bmp32.Height := s;
  bmp32.Blank := false;
  texFormat := GL_LUMINANCE_ALPHA;
  noise := TGLPerlin3DNoise.Create(NoiseSeed);
  try
    case SpritesPerTexture of
      sptOne:
        PrepareSubImage(0, 0, s, noise);
      sptFour:
        begin
          s2 := s div 2;
          PrepareSubImage(0, 0, s2, noise);
          noise.Initialize(NoiseSeed + 1);
          PrepareSubImage(s2, 0, s2, noise);
          noise.Initialize(NoiseSeed + 2);
          PrepareSubImage(0, s2, s2, noise);
          noise.Initialize(NoiseSeed + 3);
          PrepareSubImage(s2, s2, s2, noise);
        end;
    else
      Assert(false);
    end;
  finally
    noise.Free;
  end;
end;

// ------------------
// ------------------ TGLPerlin3DNoise ------------------
// ------------------
constructor TGLPerlin3DNoise.Create(randomSeed: Integer);
begin
  inherited Create;
  Initialize(randomSeed);
end;

procedure TGLPerlin3DNoise.Initialize(randomSeed: Integer);
var
  seedBackup: Integer;
  i, t, j: Integer;
  z, r: Single;
begin
  seedBackup := RandSeed;
  RandSeed := randomSeed;

  // Generate random gradient vectors.
  for i := 0 to cPERLIN_TABLE_SIZE - 1 do
  begin
    z := 1 - 2 * Random;
    r := Sqrt(1 - z * z);
    SinCosine(c2PI * Random, r, FGradients[i * 3], FGradients[i * 3 + 1]);
    FGradients[i * 3 + 2] := z;
  end;
  // Initialize permutations table
  for i := 0 to cPERLIN_TABLE_SIZE - 1 do
    FPermutations[i] := i;
  // Shake up
  for i := 0 to cPERLIN_TABLE_SIZE - 1 do
  begin
    j := Random(cPERLIN_TABLE_SIZE);
    t := FPermutations[i];
    FPermutations[i] := FPermutations[j];
    FPermutations[j] := t;
  end;

  RandSeed := seedBackup;
end;

function TGLPerlin3DNoise.Lattice(ix, iy, iz: Integer;
  fx, fy, fz: Single): Single;
const
  cMask = cPERLIN_TABLE_SIZE - 1;
var
  g: Integer;
begin
  g := FPermutations[(ix + FPermutations[(iy + FPermutations[iz and cMask]) and
    cMask]) and cMask] * 3;
  Result := FGradients[g] * fx + FGradients[g + 1] * fy + FGradients
    [g + 2] * fz;
end;

function TGLPerlin3DNoise.Lattice(ix, iy: Integer; fx, fy: Single): Single;
const
  cMask = cPERLIN_TABLE_SIZE - 1;
var
  g: Integer;
begin
  g := FPermutations[(ix + FPermutations[(iy + FPermutations[0]) and cMask])
    and cMask] * 3;
  Result := FGradients[g] * fx + FGradients[g + 1] * fy;
end;

function TGLPerlin3DNoise.Noise(const v: TAffineVector): Single;

  function Smooth(var x: Single): Single;
  begin
    Result := x * x * (3 - 2 * x);
  end;

var
  ix, iy, iz: Integer;
  fx0, fx1, fy0, fy1, fz0, fz1: Single;
  wx, wy, wz: Single;
  vy0, vy1, vz0, vz1: Single;
begin
  ix := Floor(v.x);
  fx0 := v.x - ix;
  fx1 := fx0 - 1;
  wx := Smooth(fx0);

  iy := Floor(v.y);
  fy0 := v.y - iy;
  fy1 := fy0 - 1;
  wy := Smooth(fy0);

  iz := Floor(v.z);
  fz0 := v.z - iz;
  fz1 := fz0 - 1;
  wz := Smooth(fz0);

  vy0 := Lerp(Lattice(ix, iy, iz, fx0, fy0, fz0), Lattice(ix + 1, iy, iz, fx1,
    fy0, fz0), wx);
  vy1 := Lerp(Lattice(ix, iy + 1, iz, fx0, fy1, fz0),
    Lattice(ix + 1, iy + 1, iz, fx1, fy1, fz0), wx);
  vz0 := Lerp(vy0, vy1, wy);

  vy0 := Lerp(Lattice(ix, iy, iz + 1, fx0, fy0, fz1),
    Lattice(ix + 1, iy, iz + 1, fx1, fy0, fz1), wx);
  vy1 := Lerp(Lattice(ix, iy + 1, iz + 1, fx0, fy1, fz1),
    Lattice(ix + 1, iy + 1, iz + 1, fx1, fy1, fz1), wx);
  vz1 := Lerp(vy0, vy1, wy);

  Result := Lerp(vz0, vz1, wz);
end;

function TGLPerlin3DNoise.Noise(const x, y: Single): Single;

  function Smooth(var x: Single): Single;
  begin
    Result := x * x * (3 - 2 * x);
  end;

var
  ix, iy: Integer;
  fx0, fx1, fy0, fy1: Single;
  wx, wy: Single;
  vy0, vy1: Single;
begin
  ix := Floor(x);
  fx0 := x - ix;
  fx1 := fx0 - 1;
  wx := Smooth(fx0);

  iy := Floor(y);
  fy0 := y - iy;
  fy1 := fy0 - 1;
  wy := Smooth(fy0);

  vy0 := Lerp(Lattice(ix, iy, fx0, fy0), Lattice(ix + 1, iy, fx1, fy0), wx);
  vy1 := Lerp(Lattice(ix, iy + 1, fx0, fy1), Lattice(ix + 1, iy + 1, fx1,
    fy1), wx);
  Result := Lerp(vy0, vy1, wy);
end;

function TGLPerlin3DNoise.Noise(const x, y, z: Single): Single;
begin
  Result := Noise(AffineVectorMake(x, y, z));
end;

function TGLPerlin3DNoise.Noise(const v: TGLVector): Single;
begin
  Result := Noise(PAffineVector(@v)^);
end;


// ------------------------------------------------------------------
initialization
// ------------------------------------------------------------------

RegisterClasses([TGLPerlinPFXManager]);

end.