src/SDK/apps/sampleLight/sampleLightMultiBLEAdv.c - master - pvvx/TLB2Z

src/SDK/apps/sampleLight/sampleLightMultiBLEAdv.c
493 строки15 KB
Victor
add SDK, new cfg tb03f, add zg-807z
19 фев 2026, 08:55
19 фев 2026, 08:55627d0d5
/********************************************************************************************************
 * @file    sampleLightMultiBLEAdv.c
 *
 * @brief   This is the source file for sampleLightMultiBLEAdv
 *
 * @author  Zigbee Group
 * @date    2024
 *
 * @par     Copyright (c) 2024, Telink Semiconductor (Shanghai) Co., Ltd. ("TELINK")
 *
 *          Licensed under the Apache License, Version 2.0 (the "License");
 *          you may not use this file except in compliance with the License.
 *          You may obtain a copy of the License at
 *
 *              http://www.apache.org/licenses/LICENSE-2.0
 *
 *          Unless required by applicable law or agreed to in writing, software
 *          distributed under the License is distributed on an "AS IS" BASIS,
 *          WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *          See the License for the specific language governing permissions and
 *          limitations under the License.
 *******************************************************************************************************/

#include "stack/ble/ble.h"
#include "tl_common.h"
#include "zb_api.h"
#include "zcl_include.h"
#include "sampleLight.h"
#include "device_manage.h"

#include "stack/ble/ble_multi/controller/ll/adv/leg_adv.h"

_attribute_ble_data_retention_		int	central_smp_pending = 0; 		// SMP: security & encryption;
_attribute_data_retention_	unsigned int  tlk_flash_mid = 0;
_attribute_data_retention_	unsigned int  tlk_flash_vendor = 0;
_attribute_data_retention_	unsigned char tlk_flash_capacity;



/********************* ACL connection LinkLayer TX & RX data FIFO allocation, Begin ************************************************/
/**
 * @brief	connMaxRxOctets
 * refer to BLE SPEC "4.5.10 Data PDU length management" & "2.4.2.21 LL_LENGTH_REQ and LL_LENGTH_RSP"
 * usage limitation:
 * 1. should be in range of 27 ~ 251
 * 2. for CIS peripheral, receive ll_cis_req(36Byte), must be equal to or greater than 36
 */
#define ACL_CONN_MAX_RX_OCTETS			27	//user set value


/**
 * @brief	connMaxTxOctets
 * refer to BLE SPEC: Vol 6, Part B, "4.5.10 Data PDU length management"
 * 					  Vol 6, Part B, "2.4.2.21 LL_LENGTH_REQ and LL_LENGTH_RSP"
 *  in this SDK, we separate this value into 2 parts: peripheralMaxTxOctets and centralMaxTxOctets,
 *  for purpose to save some SRAM costed by when peripheral and central use different connMaxTxOctets.
 *
 * usage limitation for ACL_xxx_MAX_TX_OCTETS
 * 1. should be in range of 27 ~ 251
 * 2. for CIS central, send ll_cis_req(36Byte), ACL_CENTRAL_MAX_TX_OCTETS must be equal to or greater than 36
 */
#define ACL_CENTRAL_MAX_TX_OCTETS		27	//user set value
#define ACL_PERIPHR_MAX_TX_OCTETS		27	//user set value



/**
 * @brief	ACL RX buffer size & number
 *  		ACL RX buffer is shared by all connections to hold LinkLayer RF RX data.
 * usage limitation for ACL_RX_FIFO_SIZE:
 * 1. must use CAL_LL_ACL_RX_FIFO_SIZE to calculate, user can not change !!!
 *
 * usage limitation for ACL_RX_FIFO_NUM:
 * 1. must be: 2^n, (power of 2)
 * 2. at least 4; recommended value: 4, 8, 16
 */
#define ACL_RX_FIFO_SIZE				CAL_LL_ACL_RX_FIFO_SIZE(ACL_CONN_MAX_RX_OCTETS)  //user can not change !!!
#define ACL_RX_FIFO_NUM					8	//user set value


/**
 * @brief   ACL TX buffer size & number
 *          ACL Central TX buffer is shared by all central connections to hold LinkLayer RF TX data.
*           ACL Peripheral TX buffer is shared by all peripheral connections to hold LinkLayer RF TX data.
 * usage limitation for ACL_xxx_TX_FIFO_SIZE:
 * 1. must use CAL_LL_ACL_TX_FIFO_SIZE to calculate, user can not change !!!
 *
 * usage limitation for ACL_xxx_TX_FIFO_NUM:
 * 1. must be: (2^n) + 1, (power of 2, then add 1)
 * 2. for B91m IC: at least 9; recommended value: 9, 17, 33; other value not allowed.
 * 3. for B85m IC: at least 8; recommended value: 8, 16, 32; other value not allowed.
 *
 * only for B91: usage limitation for size * (number - 1)
 * 1. (ACL_xxx_TX_FIFO_SIZE * (ACL_xxx_TX_FIFO_NUM - 1)) must be less than 4096 (4K)
 *    so when ACL TX FIFO size equal to or bigger than 256, ACL TX FIFO number can only be 9(can not use 17 or 33), cause 256*(17-1)=4096
 */
#define ACL_PERIPHR_TX_FIFO_SIZE        CAL_LL_ACL_TX_FIFO_SIZE(ACL_PERIPHR_MAX_TX_OCTETS) //user can not change !!!
#define ACL_PERIPHR_TX_FIFO_NUM         9   //user set value

/******************** ACL connection LinkLayer TX & RX data FIFO allocation, End ***************************************************/





/***************** ACL connection L2CAP RX & TX data Buffer allocation, Begin **************************************/
/**
 * @brief	RX MTU size & L2CAP buffer size
 * RX MTU:
 * refer to BLE SPEC: Vol 3, Part F, "3.2.8 Exchanging MTU size" & "3.4.2 MTU exchange"; Vol 3, Part G, "4.3.1 Exchange MTU"
 * this SDK set ACL Central and Peripheral RX MTU buffer separately to save some SRAM when Central and Peripheral can use different RX MTU.
 *
 * CENTRAL_ATT_RX_MTU & PERIPHR_ATT_RX_MTU
 * 1. must equal to or bigger than 23
 * 2. if support LE Secure Connections, must equal to or bigger than 65
 *
 * CENTRAL_L2CAP_BUFF_SIZE & PERIPHR_L2CAP_BUFF_SIZE
 * 1. must use CAL_L2CAP_BUFF_SIZE to calculate, user can not change !!!
 */
#define PERIPHR_ATT_RX_MTU   			23	//user set value

#define	PERIPHR_L2CAP_BUFF_SIZE			CAL_L2CAP_BUFF_SIZE(PERIPHR_ATT_RX_MTU)	//user can not change !!!


/********************* ACL connection LinkLayer TX & RX data FIFO allocation, Begin *******************************/

/**
 * @brief   ACL RX buffer, shared by all connections to hold LinkLayer RF RX data.
 *          user should define and initialize this buffer if either ACL Central or ACL Peripheral is used.
 */
_attribute_ble_data_retention_  u8  app_acl_rx_fifo[ACL_RX_FIFO_SIZE * ACL_RX_FIFO_NUM] = {0};


/**
 * @brief   ACL Peripheral TX buffer, shared by all peripheral connections to hold LinkLayer RF TX data.
 *          ACL Peripheral TX buffer should be defined only when ACl connection peripheral role is used.
 */
_attribute_ble_data_retention_  u8  app_acl_per_tx_fifo[ACL_PERIPHR_TX_FIFO_SIZE * ACL_PERIPHR_TX_FIFO_NUM * ACL_PERIPHR_MAX_NUM] = {0};

/******************** ACL connection LinkLayer TX & RX data FIFO allocation, End ***********************************/




/***************** ACL connection L2CAP RX & TX data Buffer allocation, Begin **************************************/
/**
 * @brief   L2CAP RX Data buffer for ACL Peripheral
 */
_attribute_ble_data_retention_  u8 app_per_l2cap_rx_buf[ACL_PERIPHR_MAX_NUM * PERIPHR_L2CAP_BUFF_SIZE];


/**
 * @brief   L2CAP TX Data buffer for ACL Peripheral
 *          GATT server on ACL Peripheral use this buffer.
 */
_attribute_ble_data_retention_  u8 app_per_l2cap_tx_buf[ACL_PERIPHR_MAX_NUM * PERIPHR_L2CAP_BUFF_SIZE];

/***************** ACL connection L2CAP RX & TX data Buffer allocation, End ****************************************/
u8 g_ble_txPowerSet = RF_POWER_P3dBm;


/**
 * @brief	BLE Advertising data
 */
const u8	tbl_advData[] = {
	 13, DT_COMPLETE_LOCAL_NAME, 				'm','u','l','t','i','-','-','l','i','g','h','t',
	 2,	 DT_FLAGS, 								0x05, 					// BLE limited discoverable mode and BR/EDR not supported
	 3,  DT_APPEARANCE, 						0x80, 0x01, 			// 384, Generic Remote Control, Generic category
	 5,  DT_INCOMPLETE_LIST_16BIT_SERVICE_UUID,	0x12, 0x18, 0x0F, 0x18,	// incomplete list of service class UUIDs (0x1812, 0x180F)
};

/**
 * @brief	BLE Scan Response Packet data
 */
const u8	tbl_scanRsp [] = {
	 13, DT_COMPLETE_LOCAL_NAME, 				'm','u','l','t','i','-','-','l','i','g','h','t',
};



//////////////////////////////////////////////////////////
// event call back
//////////////////////////////////////////////////////////
/**
 * @brief      BLE controller event handler call-back.
 * @param[in]  h       event type
 * @param[in]  p       Pointer point to event parameter buffer.
 * @param[in]  n       the length of event parameter.
 * @return
 */
int app_controller_event_callback (u32 h, u8 *p, int n)
{
	(void)n; //unused, remove warning

	if (h &HCI_FLAG_EVENT_BT_STD)		//Controller HCI event
	{
		u8 evtCode = h & 0xff;

		//------------ disconnect -------------------------------------
		if(evtCode == HCI_EVT_DISCONNECTION_COMPLETE)  //connection terminate
		{

		}
		else if(evtCode == HCI_EVT_LE_META)  //LE Event
		{
			u8 subEvt_code = p[0];

			//------hci le event: le connection complete event---------------------------------
			if (subEvt_code == HCI_SUB_EVT_LE_CONNECTION_COMPLETE)	// connection complete
			{

			}
			//--------hci le event: le adv report event ----------------------------------------
			else if (subEvt_code == HCI_SUB_EVT_LE_ADVERTISING_REPORT)	// ADV packet
			{

			}
			//------hci le event: le connection update complete event-------------------------------
			else if (subEvt_code == HCI_SUB_EVT_LE_CONNECTION_UPDATE_COMPLETE)	// connection update
			{

			}
            else if (subEvt_code == HCI_SUB_EVT_LE_ADVERTISING_SET_TERMINATED)
            {
            	printf("Recv conn request and the adv stop....\n");
            }

        }
    }

	return 0;

}


/**
 * @brief      BLE host event handler call-back.
 * @param[in]  h       event type
 * @param[in]  para    Pointer point to event parameter buffer.
 * @param[in]  n       the length of event parameter.
 * @return
 */
int app_host_event_callback (u32 h, u8 *para, int n)
{
	(void)n; //unused, remove warning

	u8 event = h & 0xFF;
    tlkapi_send_string_data(APP_LOG_EN, "[APP][EVT] host event", &event, 1);

	switch(event)
	{
		case GAP_EVT_SMP_PAIRING_BEGIN:
		{

		}
		break;

		case GAP_EVT_SMP_PAIRING_SUCCESS:
		{

		}
		break;

		case GAP_EVT_SMP_PAIRING_FAIL:
		{

		}
		break;

        case GAP_EVT_SMP_CONN_ENCRYPTION_DONE:
        {

        }
        break;

        case GAP_EVT_SMP_SECURITY_PROCESS_DONE:
        {

        }
        break;

		case GAP_EVT_SMP_TK_DISPLAY:
		{

		}
		break;

		case GAP_EVT_SMP_TK_REQUEST_PASSKEY:
		{

		}
		break;

		case GAP_EVT_SMP_TK_REQUEST_OOB:
		{

		}
		break;

		case GAP_EVT_SMP_TK_NUMERIC_COMPARE:
		{

		}
		break;

		case GAP_EVT_ATT_EXCHANGE_MTU:
		{

		}
		break;

		case GAP_EVT_GATT_HANDLE_VALUE_CONFIRM:
		{

		}
		break;

		default:
		break;
	}

	return 0;
}

/*
 *B91: 	VVWWXX 775FD8 YYZZ
 *B92:  VVWWXX B4CF3C YYZZ

 * public_mac:
 * 				B91 : VVWWXX 775FD8
 * 				B92 : VVWWXX B4CF3C
 *
 * random_static_mac: VVWWXXYYZZ C0
 */
/**
 * @brief		This function is used to initialize the MAC address
 * @param[in]	flash_addr - flash address for MAC address
 * @param[in]	mac_public - public address
 * @param[in]	mac_random_static - random static MAC address
 * @return      none
 */
_attribute_no_inline_
void blc_initMacAddress(int flash_addr, u8 *mac_public, u8 *mac_random_static)
{
	int rand_mac_byte3_4_read_OK = 0;
	u8 mac_read[8];
	flash_read_page(flash_addr, 8, mac_read);

	u8 value_rand[5];
	generateRandomNum(5, value_rand);

	u8 ff_six_byte[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
	if ( memcmp(mac_read, ff_six_byte, 6) ) { //read MAC address on flash success
		memcpy(mac_public, mac_read, 6);  //copy public address from flash

		if(mac_read[6] != 0xFF && mac_read[7] != 0xFF){
			mac_random_static[3] = mac_read[6];
			mac_random_static[4] = mac_read[7];
			rand_mac_byte3_4_read_OK = 1;
		}
	}
	else{  //no MAC address on flash

		#if (BUILT_IN_MAC_ON_EFUSE)
			if(efuse_get_mac_address(mac_read, 8)) //read MAC address on Efuse success
			{
				memcpy(mac_public, mac_read, 6);  //copy public address from Efuse

				mac_random_static[3] = mac_read[6];
				mac_random_static[4] = mac_read[7];
				rand_mac_byte3_4_read_OK = 1;
			}
			else
		#endif
			{
				mac_public[0] = value_rand[0];
				mac_public[1] = value_rand[1];
				mac_public[2] = value_rand[2];

				/* company id */
				mac_public[3] = U32_BYTE0(PDA_COMPANY_ID);
				mac_public[4] = U32_BYTE1(PDA_COMPANY_ID);
				mac_public[5] = U32_BYTE2(PDA_COMPANY_ID);

				flash_write_page (flash_addr, 6, mac_public); //store public address on flash for future use
			}
	}

	mac_random_static[0] = mac_public[0];
	mac_random_static[1] = mac_public[1];
	mac_random_static[2] = mac_public[2];
	mac_random_static[5] = 0xC0; 			//for random static

	if(!rand_mac_byte3_4_read_OK){
		mac_random_static[3] = value_rand[3];
		mac_random_static[4] = value_rand[4];

		flash_write_page (flash_addr + 6, 2, (u8 *)(mac_random_static + 3) ); //store random address on flash for future use
	}
}

void blc_flash_read_mid_get_vendor_set_capacity(void)
{
	/* attention: tlk_flash_mid/tlk_flash_vendor/tlk_flash_capacity will be used by application and stack later
	 * so do not change code here */
#if defined(MCU_CORE_TL721X)
	tlk_flash_mid = flash_read_mid_with_device_num(SLAVE0);
#else
	tlk_flash_mid = flash_read_mid();
#endif
	tlk_flash_vendor = flash_get_vendor(tlk_flash_mid);
	tlk_flash_capacity = ((tlk_flash_mid & 0x00ff0000)>>16);
}


/** newadd
 * @brief		user initialization when MCU power on or wake_up from deepSleep mode
 * @param[in]	none
 * @return      none
 */
void user_ble_init(void){
//////////////////////////// BLE stack Initialization  Begin //////////////////////////////////

#if (TLKAPI_DEBUG_ENABLE)
	tlkapi_debug_init();
	blc_debug_enableStackLog(STK_LOG_NONE);
#endif

	u8  mac_public[6];
	u8  mac_random_static[6];

	blc_initMacAddress(CFG_MAC_ADDRESS, mac_public, mac_random_static);

	blc_flash_read_mid_get_vendor_set_capacity();
	//////////// LinkLayer Initialization  Begin /////////////////////////
	blc_ll_initBasicMCU();

	blc_ll_initStandby_module(mac_public);

    blc_ll_initLegacyAdvertising_module();


	blc_hci_registerControllerEventHandler(app_controller_event_callback); //controller hci event to host all processed in this func

	//bluetooth event
	blc_hci_setEventMask_cmd (HCI_EVT_MASK_DISCONNECTION_COMPLETE);

	//bluetooth low energy(LE) event
	blc_hci_le_setEventMask_cmd(		HCI_LE_EVT_MASK_CONNECTION_COMPLETE  \
									|	HCI_LE_EVT_MASK_ADVERTISING_REPORT \
									|   HCI_LE_EVT_MASK_CONNECTION_UPDATE_COMPLETE);


	/* Check if any Stack(Controller & Host) Initialization error after all BLE initialization done.
	 * attention: user can not delete !!! */
	u32 error_code1 = blc_contr_checkControllerInitialization();
	u32 error_code2 = blc_host_checkHostInitialization();
	if(error_code1 != INIT_SUCCESS || error_code2 != INIT_SUCCESS){
		/* It's recommended that user set some UI alarm to know the exact error, e.g. LED shine, print log */

		#if (TLKAPI_DEBUG_ENABLE)
			tlkapi_printf(APP_LOG_EN, "[APP][INI] Stack INIT ERROR 0x%04x, 0x%04x", error_code1, error_code2);
			while(1){
				tlkapi_debug_handler();
			}
		#else
			while(1);
		#endif
	}

//////////////////////////// User Configuration for BLE application ////////////////////////////
    blc_ll_configLegacyAdvEnableStrategy(LEG_ADV_EN_STRATEGY_3);
	blc_ll_setAdvData(tbl_advData, sizeof(tbl_advData));
	blc_ll_setScanRspData(tbl_scanRsp, sizeof(tbl_scanRsp));
	blc_ll_setAdvParam(ADV_INTERVAL_200MS, ADV_INTERVAL_200MS, ADV_TYPE_CONNECTABLE_UNDIRECTED, OWN_ADDRESS_PUBLIC, 0, NULL, BLT_ENABLE_ADV_ALL, ADV_FP_NONE);
	blc_ll_setAdvEnable(BLC_ADV_ENABLE);  //ADV enable

#if PA_ENABLE
	g_ble_txPowerSet = RF_POWER_P0dBm;
	ble_rf_pa_init(0, PA_TX, PA_RX);	//for ble
#endif

	rf_set_power_level_index (g_ble_txPowerSet);

	tlkapi_send_string_data(APP_LOG_EN, "[APP][INI] acl connection demo init", 0, 0);
}

int blt_sdk_main_loop(void){
	////////////////////////////////////// BLE entry /////////////////////////////////
	blc_sdk_main_loop();

	return 0; //must return 0 due to SDP flow
}