doc/Thread.3 - main - niceSOFT/tcl

doc/Thread.3
238 строк9 KB
apnadkarni
Delete obsolete comment that TCL_THREAD_JOIN is ignored on Windows.
26 сен 2025, 16:23
26 сен 2025, 16:238675e8a
'\"
'\" Copyright (c) 1999 Scriptics Corporation
'\" Copyright (c) 1998 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH Threads 3 "8.1" Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_ConditionNotify, Tcl_ConditionWait, Tcl_ConditionFinalize, Tcl_GetThreadData, Tcl_MutexLock, Tcl_MutexUnlock, Tcl_MutexFinalize, Tcl_CreateThread, Tcl_JoinThread \- Tcl thread support
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
\fBTcl_ConditionNotify\fR(\fIcondPtr\fR)
.sp
\fBTcl_ConditionWait\fR(\fIcondPtr, mutexPtr, timePtr\fR)
.sp
\fBTcl_ConditionFinalize\fR(\fIcondPtr\fR)
.sp
void *
\fBTcl_GetThreadData\fR(\fIkeyPtr, size\fR)
.sp
\fBTcl_MutexLock\fR(\fImutexPtr\fR)
.sp
\fBTcl_MutexUnlock\fR(\fImutexPtr\fR)
.sp
\fBTcl_MutexFinalize\fR(\fImutexPtr\fR)
.sp
int
\fBTcl_CreateThread\fR(\fIidPtr, proc, clientData, stackSize, flags\fR)
.sp
int
\fBTcl_JoinThread\fR(\fIid, result\fR)
.fi
.SH ARGUMENTS
.AS Tcl_CreateThreadProc proc out
.AP Tcl_Condition *condPtr in
A condition variable, which must be associated with a mutex lock.
.AP Tcl_Mutex *mutexPtr in
.VS TIP509
A recursive mutex lock.
.VE TIP509
.AP "const Tcl_Time" *timePtr in
A time limit on the condition wait.  NULL to wait forever.
Note that a polling value of 0 seconds does not make much sense.
.AP Tcl_ThreadDataKey *keyPtr in
This identifies a block of thread local storage.  The key should be
static and process-wide, yet each thread will end up associating
a different block of storage with this key.
.AP int *size in
The size of the thread local storage block.  This amount of data
is allocated and initialized to zero the first time each thread
calls \fBTcl_GetThreadData\fR.
.AP Tcl_ThreadId *idPtr out
The referred storage will contain the id of the newly created thread as
returned by the operating system.
.AP Tcl_ThreadId id in
Id of the thread waited upon.
.AP Tcl_ThreadCreateProc *proc in
This procedure will act as the \fBmain()\fR of the newly created
thread. The specified \fIclientData\fR will be its sole argument.
.AP void *clientData in
Arbitrary information. Passed as sole argument to the \fIproc\fR.
.AP size_t stackSize in
The size of the stack given to the new thread.
.AP int flags in
Bitmask containing flags allowing the caller to modify behavior of
the new thread.
.AP int *result out
The referred storage is used to place the exit code of the thread
waited upon into it.
.BE
.SH INTRODUCTION
Beginning with the 8.1 release, the Tcl core is thread safe, which
allows you to incorporate Tcl into multithreaded applications without
customizing the Tcl core.
.PP
An important constraint of the Tcl threads implementation is that
\fIonly the thread that created a Tcl interpreter can use that
interpreter\fR.  In other words, multiple threads can not access
the same Tcl interpreter.  (However, a single thread can safely create
and use multiple interpreters.)
.SH DESCRIPTION
Tcl provides \fBTcl_CreateThread\fR for creating threads. The
caller can determine the size of the stack given to the new thread and
modify the behavior through the supplied \fIflags\fR. The value
\fBTCL_THREAD_STACK_DEFAULT\fR for the \fIstackSize\fR indicates that
the default size as specified by the operating system is to be used
for the new thread. As for the flags, currently only the values
\fBTCL_THREAD_NOFLAGS\fR and \fBTCL_THREAD_JOINABLE\fR are defined. The
first of them invokes the default behavior with no special settings.
Using the second value marks the new thread as \fIjoinable\fR. This
means that another thread can wait for the such marked thread to exit
and join it.
.PP
Restrictions: On some UNIX systems the pthread-library does not
contain the functionality to specify the stack size of a thread. The
specified value for the stack size is ignored on these systems.
.PP
Tcl provides the \fBTcl_ExitThread\fR and \fBTcl_FinalizeThread\fR functions
for terminating threads and invoking optional per-thread exit
handlers.  See the \fBTcl_Exit\fR page for more information on these
procedures.
.PP
The \fBTcl_JoinThread\fR function is provided to allow threads to wait
upon the exit of another thread, which must have been marked as
joinable through usage of the \fBTCL_THREAD_JOINABLE\fR-flag during
its creation via \fBTcl_CreateThread\fR.
.PP
Trying to wait for the exit of a non-joinable thread or a thread which
is already waited upon will result in an error. Waiting for a joinable
thread which already exited is possible, the system will retain the
necessary information until after the call to \fBTcl_JoinThread\fR.
This means that not calling \fBTcl_JoinThread\fR for a joinable thread
will cause a memory leak.
.PP
The \fBTcl_GetThreadData\fR call returns a pointer to a block of
thread-private data.  Its argument is a key that is shared by all threads
and a size for the block of storage.  The storage is automatically
allocated and initialized to all zeros the first time each thread asks for it.
The storage is automatically deallocated by \fBTcl_FinalizeThread\fR.
.SS "SYNCHRONIZATION AND COMMUNICATION"
Tcl provides \fBTcl_ThreadQueueEvent\fR and \fBTcl_ThreadAlert\fR
for handling event queuing in multithreaded applications.  See
the \fBNotifier\fR manual page for more information on these procedures.
.PP
A mutex is a lock that is used to serialize all threads through a piece
of code by calling \fBTcl_MutexLock\fR and \fBTcl_MutexUnlock\fR.
If one thread holds a mutex, any other thread calling \fBTcl_MutexLock\fR will
block until \fBTcl_MutexUnlock\fR is called.
A mutex can be destroyed after its use by calling \fBTcl_MutexFinalize\fR.
.VS TIP509
Mutexes are reentrant: they can be locked several times from the same
thread. However there must be exactly one call to
\fBTcl_MutexUnlock\fR for each call to \fBTcl_MutexLock\fR in order
for a thread to release a mutex completely.
.VE TIP509
The \fBTcl_MutexLock\fR, \fBTcl_MutexUnlock\fR and \fBTcl_MutexFinalize\fR
procedures are defined as empty macros if not compiling with threads enabled.
For declaration of mutexes the \fBTCL_DECLARE_MUTEX\fR macro should be used.
This macro assures correct mutex handling even when the core is compiled
without threads enabled.
.PP
A condition variable is used as a signaling mechanism:
a thread can lock a mutex and then wait on a condition variable
with \fBTcl_ConditionWait\fR.  This atomically releases the mutex lock
and blocks the waiting thread until another thread calls
\fBTcl_ConditionNotify\fR.  The caller of \fBTcl_ConditionNotify\fR should
have the associated mutex held by previously calling \fBTcl_MutexLock\fR,
but this is not enforced.  Notifying the
condition variable unblocks all threads waiting on the condition variable,
but they do not proceed until the mutex is released with \fBTcl_MutexUnlock\fR.
The implementation of \fBTcl_ConditionWait\fR automatically locks
the mutex before returning.
.PP
The caller of \fBTcl_ConditionWait\fR should be prepared for spurious
notifications by calling \fBTcl_ConditionWait\fR within a while loop
that tests some invariant.
.PP
A condition variable can be destroyed after its use by calling
\fBTcl_ConditionFinalize\fR.
.PP
The \fBTcl_ConditionNotify\fR, \fBTcl_ConditionWait\fR and
\fBTcl_ConditionFinalize\fR procedures are defined as empty macros if
not compiling with threads enabled.
.SS INITIALIZATION
.PP
All of these synchronization objects are self-initializing.
They are implemented as opaque pointers that should be NULL
upon first use.
The mutexes and condition variables are
either cleaned up by process exit handlers (if living that long) or
explicitly by calls to \fBTcl_MutexFinalize\fR or
\fBTcl_ConditionFinalize\fR.
Thread local storage is reclaimed during \fBTcl_FinalizeThread\fR.
.SH "SCRIPT-LEVEL ACCESS TO THREADS"
.PP
Tcl provides no built-in commands for scripts to use to create,
manage, or join threads, nor any script-level access to mutex or
condition variables.  It provides such facilities only via C
interfaces, and leaves it up to packages to expose these matters to
the script level.  One such package is the \fBThread\fR package.
.SH EXAMPLE
.PP
To create a thread with portable code, its implementation function should be
declared as follows:
.PP
.CS
static \fBTcl_ThreadCreateProc\fR MyThreadImplFunc;
.CE
.PP
It should then be defined like this example, which just counts up to a given
value and then finishes.
.PP
.CS
static \fBTcl_ThreadCreateType\fR
MyThreadImplFunc(
    void *clientData)
{
    int i, limit = (int) clientData;
    for (i=0 ; i<limit ; i++) {
        /* doing nothing at all here */
    }
    \fBTCL_THREAD_CREATE_RETURN\fR;
}
.CE
.PP
To create the above thread, make it execute, and wait for it to finish, we
would do this:
.PP
.CS
int limit = 1000000000;
void *limitData = (void*)((intptr_t) limit);
Tcl_ThreadId id;    \fI/* holds identity of thread created */\fR
int result;

if (\fBTcl_CreateThread\fR(&id, MyThreadImplFunc, limitData,
        \fBTCL_THREAD_STACK_DEFAULT\fR,
        \fBTCL_THREAD_JOINABLE\fR) != TCL_OK) {
    \fI/* Thread did not create correctly */\fR
    return;
}
\fI/* Do something else for a while here */\fR
if (\fBTcl_JoinThread\fR(id, &result) != TCL_OK) {
    \fI/* Thread did not finish properly */\fR
    return;
}
\fI/* All cleaned up nicely */\fR
.CE
.SH "SEE ALSO"
Tcl_GetCurrentThread(3), Tcl_ThreadQueueEvent(3), Tcl_ThreadAlert(3),
Tcl_ExitThread(3), Tcl_FinalizeThread(3), Tcl_CreateThreadExitHandler(3),
Tcl_DeleteThreadExitHandler(3), Thread
.SH KEYWORDS
thread, mutex, condition variable, thread local storage