README - main - niceSOFT/systemd

README
488 строк23 KB
Ananth Bhaskararaman
homed/fscrypt: default new homes to v2 policies
21 июл 2026, 07:48
21 июл 2026, 07:48571253f
systemd System and Service Manager

WEB SITE:
        https://systemd.io

GIT:
        git@github.com:systemd/systemd.git
        https://github.com/systemd/systemd

MAILING LIST:
        https://lists.freedesktop.org/mailman/listinfo/systemd-devel

IRC:
        #systemd on irc.libera.chat

BUG REPORTS:
        https://github.com/systemd/systemd/issues

OLDER DOCUMENTATION:
        https://0pointer.de/blog/projects/systemd.html
        https://www.freedesktop.org/wiki/Software/systemd

AUTHOR:
        Lennart Poettering
        Kay Sievers
        ...and many others

LICENSE:
        LGPL-2.1-or-later for all code, exceptions noted in LICENSES/README.md

REQUIREMENTS:
        Linux kernel ≥ 3.15 for timerfd_create() CLOCK_BOOTTIME support
                     ≥ 3.17 for memfd_create(), getrandom(), and kexec_file_load() (x86-64)
                     ≥ 4.3 for ambient capabilities
                     ≥ 4.5 for pids controller in cgroup v2
                     ≥ 4.6 for cgroup namespaces
                     ≥ 4.9 for RENAME_NOREPLACE support in vfat
                     ≥ 4.10 for cgroup-bpf egress and ingress hooks
                     ≥ 4.11 for nsfs NS_GET_NSTYPE
                     ≥ 4.13 for TIOCGPTPEER and SYNTH_UUID= property support in uevent
                     ≥ 4.15 for cgroup-bpf device hook and cpu controller in cgroup v2
                     ≥ 4.17 for cgroup-bpf socket address hooks, /sys/power/resume_offset,
                                and FRA_PROTOCOL attribute for fib rules
                     ≥ 4.20 for PSI (used by systemd-oomd)
                     ≥ 5.1 for SO_BINDTOIFINDEX
                     ≥ 5.2 for cgroup freezer and new mount API
                     ≥ 5.3 for bounded loops in BPF program, keyring namespacing,
                               and nexthop support
                     ≥ 5.4 for pidfd, signed Verity images, and fscrypt v2 policies
                     ≥ 5.6 for getrandom() GRND_INSECURE
                     ≥ 5.7 for CLONE_INTO_CGROUP, cgroup2fs memory_recursiveprot option,
                               BPF links and the BPF LSM hook
                     ≥ 5.8 for LOOP_CONFIGURE, STATX_ATTR_MOUNT_ROOT, and procfs
                               per-instance hidepid=/subset= options
                     ≥ 5.9 for close_range()
                     ≥ 5.10 for STATX_MNT_ID and MS_NOSYMFOLLOW mount option

        ⛔ Kernel versions below 5.10 ("minimum baseline") are not supported at all,
           and are missing required functionality as listed above.

        Linux kernel ≥ 5.11 for epoll_pwait2()
                     ≥ 5.12 for idmapped mount (mount_setattr())
                     ≥ 5.14 for cgroup.kill, quotactl_fd(), and MOUNT_ATTR_NOSYMFOLLOW

        ⚠️ Kernel versions below 5.14 ("recommended baseline") have significant gaps
           in functionality and are not recommended for use with this version
           of systemd. Taint flag 'old-kernel' will be set. systemd will most likely
           still function, but upstream support and testing are limited.

        Linux kernel ≥ 5.15 for MPOL_PREFERRED_MANY NUMA policy
                     ≥ 6.3 for MFD_EXEC/MFD_NOEXEC_SEAL and tmpfs noswap option
                     ≥ 6.5 for name_to_handle_at() AT_HANDLE_FID, SO_PEERPIDFD/SO_PASSPIDFD,
                               and MOVE_MOUNT_BENEATH
                     ≥ 6.6 for quota support on tmpfs
                     ≥ 6.7 for cgroup2fs memory_hugetlb_accounting option
                     ≥ 6.8 for STATX_MNT_ID_UNIQUE
                     ≥ 6.9 for pidfs and MPOL_WEIGHTED_INTERLEAVE NUMA policy
                     ≥ 6.10 for fcntl(F_DUPFD_QUERY), unprivileged linkat(AT_EMPTY_PATH),
                                and block device 'partscan' sysfs attribute
                     ≥ 6.12 for AT_HANDLE_MNT_ID_UNIQUE
                     ≥ 6.13 for PIDFD_GET_INFO, {set,remove}xattrat(), and
                                FSCONFIG_SET_FD support for overlayfs layers
                     ≥ 6.16 for coredump pattern '%F' (pidfd) specifier and SO_PASSRIGHTS

        ✅ systemd utilizes several new kernel APIs, but will fall back gracefully
           when unavailable.

        Kernel Config Options:
          CONFIG_DEVTMPFS
          CONFIG_CGROUPS (it is OK to disable all controllers)
          CONFIG_INOTIFY_USER
          CONFIG_SIGNALFD
          CONFIG_TIMERFD
          CONFIG_EPOLL
          CONFIG_UNIX (it requires CONFIG_NET, but every other flag in it is not necessary)
          CONFIG_SYSFS
          CONFIG_PROC_FS
          CONFIG_FHANDLE (libudev, mount and bind mount handling)

        udev will fail to work with the legacy sysfs layout:
          CONFIG_SYSFS_DEPRECATED=n

        Legacy hotplug slows down the system and confuses udev:
          CONFIG_UEVENT_HELPER_PATH=""

        Userspace firmware loading is not supported and should be disabled in
        the kernel:
          CONFIG_FW_LOADER_USER_HELPER=n

        Some udev rules and virtualization detection relies on it:
          CONFIG_DMIID

        Support for some SCSI devices serial number retrieval, to create
        additional symlinks in /dev/disk/ and /dev/tape:
          CONFIG_BLK_DEV_BSG

        Required for PrivateNetwork= in service units:
          CONFIG_NET_NS
        Note that systemd-localed.service and other systemd units use
        PrivateNetwork so this is effectively required.

        Required for PrivateUsers= in service units:
          CONFIG_USER_NS

        Optional but strongly recommended:
          CONFIG_IPV6
          CONFIG_AUTOFS_FS
          CONFIG_TMPFS_XATTR
          CONFIG_{TMPFS,EXT4_FS,XFS,BTRFS_FS,...}_POSIX_ACL
          CONFIG_SECCOMP
          CONFIG_SECCOMP_FILTER (required for seccomp support)
          CONFIG_KCMP (for the kcmp() syscall, used to be under
                       CONFIG_CHECKPOINT_RESTORE before ~5.12;
                       not needed after 6.10)
          CONFIG_NET_SCHED
          CONFIG_NET_SCH_FQ_CODEL

        Required for CPUShares= in resource control unit settings:
          CONFIG_CGROUP_SCHED
          CONFIG_FAIR_GROUP_SCHED

        Required for CPUQuota= in resource control unit settings:
          CONFIG_CFS_BANDWIDTH

        Required for IPAddressDeny=, IPAddressAllow=, IPIngressFilterPath=,
        IPEgressFilterPath= in resource control unit settings unit settings:
          CONFIG_BPF
          CONFIG_BPF_SYSCALL
          CONFIG_BPF_JIT
          CONFIG_HAVE_EBPF_JIT
          CONFIG_CGROUP_BPF

        Required for SocketBind{Allow|Deny}=, RestrictNetworkInterfaces= in
        resource control unit settings:
          CONFIG_BPF
          CONFIG_BPF_SYSCALL
          CONFIG_BPF_JIT
          CONFIG_HAVE_EBPF_JIT
          CONFIG_CGROUP_BPF

        For UEFI systems:
          CONFIG_EFIVAR_FS
          CONFIG_EFI_PARTITION

        Required for signed Verity images support:
          CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG
        Required to verify signed Verity images using keys enrolled in the MOK
        (Machine-Owner Key) and DB UEFI certificate stores:
          CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING
          CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG_PLATFORM_KEYRING
          CONFIG_IMA_ARCH_POLICY
          CONFIG_INTEGRITY_MACHINE_KEYRING

        Required for reading credentials from SMBIOS:
          CONFIG_DMI
          CONFIG_DMI_SYSFS (must be built-in, not as kmod)

        Required for RestrictFileSystems= in service units:
          CONFIG_BPF
          CONFIG_BPF_SYSCALL
          CONFIG_BPF_LSM
          CONFIG_DEBUG_INFO_BTF
          CONFIG_LSM="...,bpf" or kernel booted with lsm="...,bpf".

        We recommend to turn off Real-Time group scheduling in the kernel when
        using systemd. RT group scheduling effectively makes RT scheduling
        unavailable for most userspace, since it requires explicit assignment of
        RT budgets to each unit whose processes making use of RT. As there's no
        sensible way to assign these budgets automatically this cannot really be
        fixed, and it's best to disable group scheduling hence:
           CONFIG_RT_GROUP_SCHED=n

        It's a good idea to disable the implicit creation of networking bonding
        devices by the kernel networking bonding module, so that the
        automatically created "bond0" interface doesn't conflict with any such
        device created by systemd-networkd (or other tools). Ideally there would
        be a kernel compile-time option for this, but there currently isn't. The
        next best thing is to make this change through a modprobe.d drop-in.
        This is shipped by default, see modprobe.d/systemd.conf.

        Required for systemd-nspawn:
          CONFIG_DEVPTS_MULTIPLE_INSTANCES (removed and unneeded since 4.7)

        Required for systemd-oomd:
          CONFIG_PSI
          CONFIG_MEMCG

        glibc >= 2.34
        musl >= 1.2.6 (required when building systemd with -Dlibc=musl)
        libxcrypt >= 4.4.0 (optional)
        libmount >= 2.30 (from util-linux)
                (util-linux *must* be built without --enable-libmount-support-mtab)
        libseccomp >= 2.4.0 (optional)
        libblkid >= 2.37 (from util-linux) (optional)
        libkmod >= 15 (optional)
        PAM >= 1.1.2 (optional)
        libcryptsetup >= 2.4.0 (optional),
        libaudit (optional)
        libacl (optional)
        libbpf >= 0.1.0 (optional),
               >= 1.4.0 is required for using GCC as a bpf compiler
        libfdisk >= 2.35 (from util-linux) (optional)
        libselinux >= 2.1.9 (optional)
        libapparmor >= 2.13 (optional)
        libxenctrl >= 4.9 (optional)
        zlib (optional)
        bzip2 (optional)
        liblzma (optional)
        liblz4 >= 1.3.0 / 130 (optional)
        libzstd >= 1.4.0 (optional)
        libarchive >= 3.0 (optional)
        libxkbcommon >= 0.3.0 (optional)
        libpcre2 (optional)
        libqrencode >= 3 (optional)
        libmicrohttpd >= 0.9.33 (optional)
        libcurl >= 7.32.0 (optional)
        libidn2 (optional)
        gnutls >= 3.1.4 (optional)
        openssl >= 3.0.0 (optional, required to support DNS-over-TLS)
        p11-kit >= 0.23.3 (optional)
        libfido2 (optional)
        tpm2-tss (optional)
        elfutils >= 177 (optional)
        polkit (optional)
        tzdata >= 2014f (optional)
        pkg-config
        gperf
        docbook-xsl (optional, required for documentation)
        xsltproc    (optional, required for documentation)
        python >= 3.9
        python-jinja2
        python-pefile (optional, required for ukify)
        python-lxml (optional, required to build the indices)
        pyelftools (optional, required for systemd-boot)
        meson >= 0.62.0
        ninja
        gcc >= 8.4
            >= 13.1.0 is required to build BPF program by using GCC
        binutils >= 2.35
        awk, sed, grep, and similar tools
        clang,llvm >= 10 (optional, required to build BPF programs)
                   >= 13 (optional, required to build the entire project)

        During runtime, you need the following additional
        dependencies:

        util-linux >= v2.27.1 required (including but not limited to: mount,
                                        umount, swapon, swapoff, sulogin,
                                        agetty, fsck)
        dbus >= 1.4.0 (strictly speaking optional, but recommended)
                NOTE: If using dbus < 1.9.18, you should override the default
                policy directory (--with-dbuspolicydir=/etc/dbus-1/system.d).
        polkit (optional)
        gnupg >= 2.4 optional (for signature verification in: importctl,
                               systemd-sysupdate)

        To build in directory build/:
          meson setup build/ && ninja -C build/

        Any configuration options can be specified as -Darg=value... arguments
        to meson. After the build directory is initially configured, meson will
        refuse to run again, and options must be changed with:
          meson configure -Darg=value build/
        meson configure without any arguments will print out available options and
        their current values.

        Useful commands:
          ninja -C build -v some/target
          meson test -C build/ -q
          sudo meson install -C build/ --no-rebuild
          DESTDIR=... meson install -C build/

        A tarball can be created with:
          v=250 && git archive --prefix=systemd-$v/ v$v | zstd >systemd-$v.tar.zstd

        When systemd-hostnamed is used, it is strongly recommended to install
        nss-myhostname to ensure that, in a world of dynamically changing
        hostnames, the hostname stays resolvable under all circumstances. In
        fact, systemd-hostnamed will warn if nss-myhostname is not installed.

        nss-systemd must be enabled on systemd systems, as that's required for
        DynamicUser= to work. Note that we ship services out-of-the-box that
        make use of DynamicUser= now, hence enabling nss-systemd is not
        optional.

        Note that the build prefix for systemd must be /usr/. (Moreover, packages
        systemd relies on — such as D-Bus — really should use the same prefix,
        otherwise you are on your own.) Split-usr and unmerged-usr systems are no
        longer supported, and moving everything under /usr/ is required. Systems
        with a separate /usr/ partition must mount it before transitioning into it
        (i.e.: from the initrd). For more information see:
        https://systemd.io/SEPARATE_USR_IS_BROKEN
        https://systemd.io/THE_CASE_FOR_THE_USR_MERGE

POLICY FOR SUPPORT OF DISTRIBUTIONS AND ARCHITECTURES:
        systemd main branch and latest major or stable releases are generally
        expected to compile on current versions of popular distributions (at
        least all non-EOL versions of Fedora, Debian unstable/testing/stable,
        latest Ubuntu LTS and non-LTS releases, openSUSE Tumbleweed/Leap,
        CentOS Stream 9 and 10, up-to-date Arch, etc.)  We will generally
        attempt to support also other non-EOL versions of various distros.
        Features which would break compilation on slightly older distributions
        will only be introduced if there are significant reasons for this
        (i.e. supporting them interferes with development or requires too many
        resources to support). In some cases backports of specific libraries or
        tools might be required.

        The policy is similar for architecture support. systemd is regularly
        tested on popular architectures (currently amd64, i386, arm64, ppc64el,
        and s390x), but should compile and work also on other architectures, for
        which support has been added. systemd will emit warnings when
        architecture-specific constants are not defined.

STATIC LIBRARIES AND "STANDALONE" BINARIES:
        systemd provides public shared libraries libsystemd.so and libudev.so.
        The latter is deprecated, and the sd-device APIs in libsystemd should
        be used instead for new code. Normally systemd is built with a private
        shared library, libsystemd-shared-<suffix>.so, that also includes the
        libsystemd code, and by default most systemd binaries are linked to it.
        Using shared libraries saves disk space and memory at runtime, because
        only one copy of the code is needed.

        It is possible to build static versions of systemd public shared
        libraries (via the configuration options '-Dstatic-libsystemd' and
        '-Dstatic-libudev'). This allows the libsystemd and libudev code to be
        linked statically into programs. Note that mixing & matching different
        versions of libsystemd and systemd is generally not recommended, since
        various of its APIs wrap internal state and protocols of systemd (e.g.
        logind and udev databases), which are not considered stable. Hence,
        using static libraries is not recommended since it generally means that
        version of the static libsystemd linked into applications and the host
        systemd may get out of sync, creating compatibility problems.

        In addition, it is possible to disable the use of
        libsystemd-shared-<suffix>.so for various components (via the
        configuration options '-Dlink-*-shared'). In this mode, the libsystemd
        and libsystemd-shared code is linked statically into selected binaries.
        This option is intended for systems where some of the components are
        intended to be delivered independently of the main systemd package.

        In addition, some binaries can be compiled in a second version (via the
        configuration option '-Dstandalone-binaries'). The version suffixed
        with ".standalone" has the libsystemd and libsystemd-shared code linked
        statically. Those binaries are intended as replacements to be used in
        limited installations where the full systemd suite is not installed. An
        alternative approach is to rebuild systemd with a different
        '-Dshared-lib-tag' setting, allowing different systemd binaries to be
        linked to instances of the private shared library that can be installed
        in parallel.

        When compiled in one of the modes described in this section, the code
        has identical functionality (apart from the potential compatibility
        issues).

        Finally, fully static compilation of systemd (the program) is possible,
        see next section.

        Again: Using the default shared linking is recommended, building static
        or "standalone" versions is not. Mixing versions of systemd components
        that would normally be built and used together (in particular various
        daemons and the manager) is not recommended: we do not test such
        combinations upstream and cannot provide support. Distributors making
        use of those options are responsible if things do not work as expected.

STATIC BINARIES:
        It is possible to compile systemd (the program) as a static binary with
        the meson options:
          --default-library=static --prefer-static -Dbuild-static=true -Dsystemd-multicall-binary=true
        This results in a static 'systemd' binary that can be used as PID1 in a
        container. This binary does not use dlopen(3), which means that it
        cannot dynamically extend its functionality by loading other libraries,
        even if they were available in the file system. It also does not
        support NSS and instead uses simplified code that only supports static
        passwd and group files to resolve users.

USERS AND GROUPS:
        Default udev rules use the following standard system group names, which
        need to be resolvable by getgrnam() at any time, even in the very early
        boot stages, where no other databases and network are available:

          audio, cdrom, clock, dialout, disk, input, kmem, kvm, lp, render,
          sgx, tape, tty, video

        During runtime, the journal daemon requires the "systemd-journal" system
        group to exist. New journal files will be readable by this group (but
        not writable), which may be used to grant specific users read access. In
        addition, system groups "wheel" and "adm" will be given read-only access
        to journal files using systemd-tmpfiles-setup.service.

        The journal remote daemon requires the "systemd-journal-remote" system
        user and group to exist. During execution this network facing service
        will drop privileges and assume this uid/gid for security reasons.

        Similarly, the network management daemon requires the "systemd-network"
        system user and group to exist.

        Similarly, the name resolution daemon requires the "systemd-resolve"
        system user and group to exist.

        Similarly, the coredump support requires the "systemd-coredump" system
        user and group to exist.

GLIBC NSS:
        systemd ships with four glibc NSS modules:

        nss-myhostname resolves the local hostname to locally configured IP
        addresses, as well as "localhost" to 127.0.0.1/::1.

        nss-resolve enables DNS resolution via the systemd-resolved DNS/LLMNR
        caching stub resolver "systemd-resolved".

        nss-mymachines enables resolution of all local containers registered
        with machined to their respective IP addresses.

        nss-systemd enables resolution of users/group registered via the
        User/Group Record Lookup API (https://systemd.io/USER_GROUP_API),
        including all dynamically allocated service users. (See the
        DynamicUser= setting in unit files.)

        To make use of these NSS modules, please add them to the "hosts:",
        "passwd:", "group:", "shadow:" and "gshadow:" lines in
        /etc/nsswitch.conf.

        The four modules should be used in the following order:

                passwd: files systemd
                group: files [SUCCESS=merge] systemd
                shadow: files systemd
                gshadow: files systemd
                hosts: mymachines resolve [!UNAVAIL=return] files myhostname dns

WARNINGS and TAINT FLAGS:
        systemd requires that the /run mount point exists. systemd also
        requires that /var/run is a symlink to /run. Taint flag 'var-run-bad'
        will be set when this condition is detected.

        Systemd will also warn when the cgroup support is unavailable in the
        kernel (taint flag 'cgroups-missing'), the system is using the old
        cgroup hierarchy (taint flag 'cgroupsv1'), the hardware clock is
        running in non-UTC mode (taint flag 'local-hwclock'), the kernel
        overflow UID or GID are not 65534 (taint flags 'overflowuid-not-65534'
        and 'overflowgid-not-65534'), the UID or GID range assigned to the
        running systemd instance covers less than 0…65534 (taint flags
        'short-uid-range' and 'short-gid-range').

        Taint conditions are logged during boot, but may also be checked at any
        time with:

          busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager Tainted

        See org.freedesktop.systemd1(5) for more information.

VALGRIND:
        To run systemd under valgrind, compile systemd with the valgrind
        development headers available (i.e. valgrind-devel or equivalent).
        Otherwise, false positives will be triggered by code which violates
        some rules but is actually safe. Note that valgrind generates nice
        output only on exit(), hence on shutdown we don't execve()
        systemd-shutdown.

STABLE BRANCHES AND BACKPORTS:
        Stable branches with backported patches are available in the
        systemd-stable repo at https://github.com/systemd/systemd-stable.

        Stable branches are started for certain releases of systemd and named
        after them, e.g. v238-stable. Stable branches are managed by
        distribution maintainers on an as needed basis. See
        https://systemd.io/BACKPORTS for some more information and examples.