/
niceSOFT
/
sqlite
Обзор
Документация
Войти
/
niceSOFT
/
sqlite
Код
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
version-3.53.0
Makefile.msc
2 940 строк
91 KB
drh
Avoid using unsigned 64-bit integer division on platforms that do not support
29 мар 2026, 22:06
29 мар 2026, 22:06
03f13d7
Код
Авторство
О чём код?
# # nmake Makefile for SQLite # ############################################################################### ############################## START OF OPTIONS ############################### ############################################################################### # The toplevel directory of the source tree. This is the directory # that contains this "Makefile.msc". # TOP = . # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # Set this non-0 to create and use the SQLite amalgamation file. # !IFNDEF USE_AMALGAMATION USE_AMALGAMATION = 1 !ENDIF # <</mark>> # Optionally set EXTRA_SRC to a list of C files to append to # the generated sqlite3.c. Any sqlite3 extensions added this # way may require manual editing, as described in # https://sqlite.org/forum/forumpost/903f721f3e7c0d25 # !IFNDEF EXTRA_SRC EXTRA_SRC = !ENDIF # Set this non-0 to enable full warnings (-W4, etc) when compiling. # !IFNDEF USE_FULLWARN USE_FULLWARN = 1 !ENDIF # Set this non-0 to enable treating warnings as errors (-WX, etc) when # compiling. # !IFNDEF USE_FATAL_WARN USE_FATAL_WARN = 0 !ENDIF # Set this non-0 to enable full runtime error checks (-RTC1, etc). This # has no effect if (any) optimizations are enabled. # !IFNDEF USE_RUNTIME_CHECKS USE_RUNTIME_CHECKS = 0 !ENDIF # Set this non-0 to create a SQLite amalgamation file that excludes the # various built-in extensions. # !IFNDEF MINIMAL_AMALGAMATION MINIMAL_AMALGAMATION = 0 !ENDIF # Set this non-0 to use "stdcall" calling convention for the core library # and shell executable. # !IFNDEF USE_STDCALL USE_STDCALL = 0 !ENDIF # Use the USE_SEH=0 option on the nmake command line to omit structured # exception handling (SEH) support. SEH is on by default. # !IFNDEF USE_SEH USE_SEH = 1 !ENDIF # Use STATICALLY_LINK_TCL=1 to statically link against TCL # !IFNDEF STATICALLY_LINK_TCL STATICALLY_LINK_TCL = 0 !ELSEIF $(STATICALLY_LINK_TCL)!=0 CCOPTS = $(CCOPTS) -DSTATIC_BUILD !ENDIF # Set this non-0 to have the shell executable link against the core dynamic # link library. # !IFNDEF DYNAMIC_SHELL DYNAMIC_SHELL = 0 !ENDIF # Set this non-0 to enable extra code that attempts to detect misuse of the # SQLite API. # !IFNDEF API_ARMOR API_ARMOR = 0 !ENDIF # If necessary, create a list of harmless compiler warnings to disable when # compiling the various tools. For the SQLite source code itself, warnings, # if any, will be disabled from within it. # !IFNDEF NO_WARN !IF $(USE_FULLWARN)!=0 NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206 NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4244 -wd4305 -wd4306 -wd4702 -wd4706 !ENDIF !ENDIF # Set this non-0 to split the SQLite amalgamation file into chunks to # be used for debugging with Visual Studio. # !IFNDEF SPLIT_AMALGAMATION SPLIT_AMALGAMATION = 0 !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # Set this non-0 to use zlib, possibly compiling it from source code. # !IFNDEF USE_ZLIB USE_ZLIB = 0 !ENDIF # Set this non-0 to build zlib from source code. This is enabled by # default and in that case it will be assumed that the ZLIBDIR macro # points to the top-level source code directory for zlib. # !IFNDEF BUILD_ZLIB BUILD_ZLIB = 1 !ENDIF # Set this non-0 to use the International Components for Unicode (ICU). # !IFNDEF USE_ICU USE_ICU = 0 !ENDIF # <</mark>> # Set this non-0 to dynamically link to the MSVC runtime library. # !IFNDEF USE_CRT_DLL USE_CRT_DLL = 0 !ENDIF # Set this non-0 to link to the RPCRT4 library. # !IFNDEF USE_RPCRT4_LIB USE_RPCRT4_LIB = 0 !ENDIF # Set this non-0 to generate assembly code listings for the source code # files. # !IFNDEF USE_LISTINGS USE_LISTINGS = 0 !ENDIF # Set this non-0 to attempt setting the native compiler automatically # for cross-compiling the command line tools needed during the compilation # process. # !IFNDEF XCOMPILE XCOMPILE = 0 !ENDIF # Set this non-0 to use the native libraries paths for cross-compiling # the command line tools needed during the compilation process. # !IFNDEF USE_NATIVE_LIBPATHS USE_NATIVE_LIBPATHS = 0 !ENDIF # Set this 0 to skip the compiling and embedding of version resources. # !IFNDEF USE_RC USE_RC = 1 !ENDIF # Set this non-0 to compile binaries suitable for the UWP environment. # This setting does not apply to any binaries that require Tcl to operate # properly (i.e. the text fixture, etc). # !IFNDEF FOR_UWP FOR_UWP = 0 !ENDIF # Set this non-0 to compile binaries suitable for the Windows 10 platform. # !IFNDEF FOR_WIN10 FOR_WIN10 = 0 !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # Set this non-0 to skip attempting to look for and/or link with the Tcl # runtime library. # !IFNDEF NO_TCL NO_TCL = 0 !ENDIF # <</mark>> # Set this to non-0 to create and use PDBs. # !IFNDEF SYMBOLS SYMBOLS = 1 !ENDIF # Set this to non-0 to use the SQLite debugging heap subsystem. # !IFNDEF MEMDEBUG MEMDEBUG = 0 !ENDIF # Set this to non-0 to use the Win32 native heap subsystem. # !IFNDEF WIN32HEAP WIN32HEAP = 0 !ENDIF # Set this to non-0 to enable OSTRACE() macros, which can be useful when # debugging. # !IFNDEF OSTRACE OSTRACE = 0 !ENDIF # enable address sanitizer using ASAN=1 on the command-line. # !IFNDEF ASAN ASAN = 0 !ENDIF # Set this to one of the following values to enable various debugging # features. Each level includes the debugging options from the previous # levels. Currently, the recognized values for DEBUG are: # # 0 == NDEBUG: Disables assert() and other runtime diagnostics. # 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API. # 2 == Disables NDEBUG and all optimizations and then enables PDBs. # 3 == SQLITE_DEBUG: Enables various diagnostics messages and code. # 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call. # 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros. # 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros. # !IFNDEF DEBUG DEBUG = 0 !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # By default, use --linemacros=1 argument to the mksqlite3c.tcl tool, which # is used to build the amalgamation. This can be turned off to ease debug # of the amalgamation away from the source tree. # !IFNDEF NO_LINEMACROS NO_LINEMACROS = 0 !ENDIF # <</mark>> # Enable use of available compiler optimizations? Normally, this should be # non-zero. Setting this to zero, thus disabling all compiler optimizations, # can be useful for testing. # !IFNDEF OPTIMIZATIONS OPTIMIZATIONS = 2 !ENDIF # Set this to non-0 to enable support for the session extension. # !IFNDEF SESSION SESSION = 0 !ENDIF # Set this to non-0 to enable support for the rbu extension. # !IFNDEF RBU RBU = 0 !ENDIF # Set this to non-0 to enable support for blocking locks. # !IFNDEF SETLK_TIMEOUT SETLK_TIMEOUT = 0 !ENDIF # Set the source code file to be used by executables and libraries when # they need the amalgamation. # !IFNDEF SQLITE3C !IF $(SPLIT_AMALGAMATION)!=0 SQLITE3C = sqlite3-all.c !ELSE SQLITE3C = sqlite3.c !ENDIF !ENDIF # Set the include code file to be used by executables and libraries when # they need SQLite. # !IFNDEF SQLITE3H SQLITE3H = sqlite3.h !ENDIF # This is the name to use for the SQLite dynamic link library (DLL). # !IFNDEF SQLITE3DLL !IF $(FOR_WIN10)!=0 SQLITE3DLL = winsqlite3.dll !ELSE SQLITE3DLL = sqlite3.dll !ENDIF !ENDIF # This is the name to use for the SQLite import library (LIB). # !IFNDEF SQLITE3LIB !IF $(FOR_WIN10)!=0 SQLITE3LIB = winsqlite3.lib !ELSE SQLITE3LIB = sqlite3.lib !ENDIF !ENDIF # This is the name to use for the SQLite shell executable (EXE). # !IFNDEF SQLITE3EXE !IF $(FOR_WIN10)!=0 SQLITE3EXE = winsqlite3shell.exe !ELSE SQLITE3EXE = sqlite3.exe !ENDIF !ENDIF # This is the argument used to set the program database (PDB) file for the # SQLite shell executable (EXE). # !IFNDEF SQLITE3EXEPDB !IF $(FOR_WIN10)!=0 SQLITE3EXEPDB = !ELSE SQLITE3EXEPDB = /pdb:sqlite3sh.pdb !ENDIF !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # These are the names of the customized Tcl header files used by various parts # of this makefile when the stdcall calling convention is in use. It is not # used for any other purpose. # !IFNDEF SQLITETCLH SQLITETCLH = sqlite_tcl.h !ENDIF !IFNDEF SQLITETCLDECLSH SQLITETCLDECLSH = sqlite_tclDecls.h !ENDIF # This is the name to use for the dynamic link library (DLL) containing the # Tcl bindings for SQLite. # !IFNDEF SQLITE3TCLDLL SQLITE3TCLDLL = tclsqlite3.dll !ENDIF # These are the additional targets that the targets that integrate with the # Tcl library should depend on when compiling, etc. # !IFNDEF SQLITE_TCL_DEP !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 SQLITE_TCL_DEP = $(SQLITETCLDECLSH) $(SQLITETCLH) !ELSE SQLITE_TCL_DEP = !ENDIF !ENDIF # <</mark>> # These are the "standard" SQLite compilation options used when compiling for # the Windows platform. # !IFNDEF OPT_FEATURE_FLAGS OPT_FEATURE_FLAGS = $(OPT_XTRA) !IF $(MINIMAL_AMALGAMATION)==0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS5=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_BYTECODE_VTAB=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_CARRAY=1 !ENDIF OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1 !ENDIF # Additional feature-options above and beyond what are normally used can be # be added using OPTIONS=.... on the command-line. These values are # appended to the OPT_FEATURE_FLAGS variable. # !IFDEF OPTIONS OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) $(OPTIONS) !ENDIF # Should the session extension be enabled? If so, add compilation options # to enable it. # !IF $(SESSION)!=0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1 !ENDIF # Always enable math functions on Windows OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_MATH_FUNCTIONS OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PERCENTILE # Should the rbu extension be enabled? If so, add compilation options # to enable it. # !IF $(RBU)!=0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RBU=1 !ENDIF # Should structured exception handling (SEH) be enabled for WAL mode in # the core library? It is on by default. Only omit it if the # USE_SEH=0 option is provided on the nmake command-line. # !IF $(USE_SEH)==0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_OMIT_SEH=1 !ENDIF # These are the "extended" SQLite compilation options used when compiling for # the Windows 10 platform. # !IFNDEF EXT_FEATURE_FLAGS !IF $(FOR_WIN10)!=0 EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1 EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1 EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1 !ELSE EXT_FEATURE_FLAGS = !ENDIF !ENDIF !IF $(SETLK_TIMEOUT)!=0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SETLK_TIMEOUT !ENDIF ############################################################################### ############################### END OF OPTIONS ################################ ############################################################################### # When compiling for the Windows 10 platform, the PLATFORM macro must be set # to an appropriate value (e.g. x86, x64, arm, arm64, etc). # !IF $(FOR_WIN10)!=0 !IFNDEF PLATFORM !ERROR Using the FOR_WIN10 option requires a value for PLATFORM. !ENDIF !ENDIF # This assumes that MSVC is always installed in 32-bit Program Files directory # and sets the variable for use in locating other 32-bit installs accordingly. # PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\.. PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\) # Check for the predefined command macro CC. This should point to the compiler # binary for the target platform. If it is not defined, simply define it to # the legacy default value 'cl.exe'. # !IFNDEF CC CC = cl.exe !ENDIF # Check for the predefined command macro CSC. This should point to a working # C Sharp compiler binary. If it is not defined, simply define it to the # legacy default value 'csc.exe'. # !IFNDEF CSC CSC = csc.exe !ENDIF # Check for the command macro LD. This should point to the linker binary for # the target platform. If it is not defined, simply define it to the legacy # default value 'link.exe'. # !IFNDEF LD LD = link.exe !ENDIF # Check for the predefined command macro RC. This should point to the resource # compiler binary for the target platform. If it is not defined, simply define # it to the legacy default value 'rc.exe'. # !IFNDEF RC RC = rc.exe !ENDIF # Check for the MSVC runtime library path macro. Otherwise, this value will # default to the 'lib' directory underneath the MSVC installation directory. # !IFNDEF CRTLIBPATH CRTLIBPATH = $(VCINSTALLDIR)\lib !ENDIF CRTLIBPATH = $(CRTLIBPATH:\\=\) # Check for the command macro NCC. This should point to the compiler binary # for the platform the compilation process is taking place on. If it is not # defined, simply define it to have the same value as the CC macro. When # cross-compiling, it is suggested that this macro be modified via the command # line (since nmake itself does not provide a built-in method to guess it). # For example, to use the x86 compiler when cross-compiling for x64, a command # line similar to the following could be used (all on one line): # # nmake /f Makefile.msc sqlite3.dll # XCOMPILE=1 USE_NATIVE_LIBPATHS=1 # # Alternatively, the full path and file name to the compiler binary for the # platform the compilation process is taking place may be specified (all on # one line): # # nmake /f Makefile.msc sqlite3.dll # "NCC=""%VCINSTALLDIR%\bin\cl.exe""" # USE_NATIVE_LIBPATHS=1 # !IFDEF NCC NCC = $(NCC:\\=\) !ELSEIF $(XCOMPILE)!=0 NCC = "$(VCINSTALLDIR)\bin\$(CC)" NCC = $(NCC:\\=\) !ELSE NCC = $(CC) !ENDIF # Check for the MSVC native runtime library path macro. Otherwise, # this value will default to the 'lib' directory underneath the MSVC # installation directory. # !IFNDEF NCRTLIBPATH NCRTLIBPATH = $(VCINSTALLDIR)\lib !ENDIF NCRTLIBPATH = $(NCRTLIBPATH:\\=\) # Check for the Platform SDK library path macro. Otherwise, this # value will default to the 'lib' directory underneath the Windows # SDK installation directory (the environment variable used appears # to be available when using Visual C++ 2008 or later via the # command line). # !IFNDEF NSDKLIBPATH NSDKLIBPATH = $(WINDOWSSDKDIR)\lib !ENDIF NSDKLIBPATH = $(NSDKLIBPATH:\\=\) # Check for the UCRT library path macro. Otherwise, this value will # default to the version-specific, platform-specific 'lib' directory # underneath the Windows SDK installation directory. # !IFNDEF UCRTLIBPATH UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM) !ENDIF UCRTLIBPATH = $(UCRTLIBPATH:\\=\) # C compiler and options for use in building executables that # will run on the platform that is doing the build. # !IF $(USE_FULLWARN)!=0 BCC = $(NCC) -nologo -W4 -Fd$*.pdb $(CCOPTS) $(BCCOPTS) !ELSE BCC = $(NCC) -nologo -W3 -Fd$*.pdb $(CCOPTS) $(BCCOPTS) !ENDIF # Check if assembly code listings should be generated for the source # code files to be compiled. # !IF $(USE_LISTINGS)!=0 BCC = $(BCC) -FAcs !ENDIF # Check if the native library paths should be used when compiling # the command line tools used during the compilation process. If # so, set the necessary macro now. # !IF $(USE_NATIVE_LIBPATHS)!=0 NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)" !IFDEF NUCRTLIBPATH NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\) NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)" !ENDIF !ENDIF # C compiler and options for use in building executables that # will run on the target platform. (BCC and TCC are usually the # same unless your are cross-compiling.) # !IF $(USE_FULLWARN)!=0 TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS) !ELSE TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS) !ENDIF # Check if warnings should be treated as errors when compiling. # !IF $(USE_FATAL_WARN)!=0 TCC = $(TCC) -WX !ENDIF TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src $(RCOPTS) $(RCCOPTS) # Check if we want to use the "stdcall" calling convention when compiling. # This is not supported by the compilers for non-x86 platforms. It should # also be noted here that building any target with these "stdcall" options # will most likely fail if the Tcl library is also required. This is due # to how the Tcl library functions are declared and exported (i.e. without # an explicit calling convention, which results in "cdecl"). # !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 !IF "$(PLATFORM)"=="x86" CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # TEST_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl # <</mark>> !ELSE !IFNDEF PLATFORM CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # TEST_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl # <</mark>> !ELSE CORE_CCONV_OPTS = SHELL_CCONV_OPTS = # <<mark>> TEST_CCONV_OPTS = # <</mark>> !ENDIF !ENDIF !ELSE CORE_CCONV_OPTS = SHELL_CCONV_OPTS = # <<mark>> TEST_CCONV_OPTS = # <</mark>> !ENDIF # These are additional compiler options used for the core library. # !IFNDEF CORE_COMPILE_OPTS !IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport) !ELSE CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) !ENDIF !ENDIF # These are the additional targets that the core library should depend on # when linking. # !IFNDEF CORE_LINK_DEP !IF $(DYNAMIC_SHELL)!=0 CORE_LINK_DEP = !ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86" CORE_LINK_DEP = sqlite3.def !ELSE CORE_LINK_DEP = !ENDIF !ENDIF # These are additional linker options used for the core library. # !IFNDEF CORE_LINK_OPTS !IF $(DYNAMIC_SHELL)!=0 CORE_LINK_OPTS = !ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86" CORE_LINK_OPTS = /DEF:sqlite3.def !ELSE CORE_LINK_OPTS = !ENDIF !ENDIF # These are additional compiler options used for the shell executable. # !IFNDEF SHELL_COMPILE_OPTS !IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport) !ELSE SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) !ENDIF !ENDIF # This is the source code that the shell executable should be compiled # with. # !IFNDEF SHELL_CORE_SRC !IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 SHELL_CORE_SRC = # <<mark>> !ELSEIF $(USE_AMALGAMATION)==0 SHELL_CORE_SRC = # <</mark>> !ELSE SHELL_CORE_SRC = $(SQLITE3C) !ENDIF !ENDIF # This is the core library that the shell executable should depend on. # !IFNDEF SHELL_CORE_DEP !IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 SHELL_CORE_DEP = $(SQLITE3DLL) # <<mark>> !ELSEIF $(USE_AMALGAMATION)==0 SHELL_CORE_DEP = libsqlite3.lib # <</mark>> !ELSE SHELL_CORE_DEP = !ENDIF !ENDIF # <<mark>> # If zlib support is enabled, add the dependencies for it. # !IF $(USE_ZLIB)!=0 && $(BUILD_ZLIB)!=0 SHELL_CORE_DEP = zlib $(SHELL_CORE_DEP) TESTFIXTURE_DEP = zlib $(TESTFIXTURE_DEP) !ENDIF # <</mark>> # This is the core library that the shell executable should link with. # !IFNDEF SHELL_CORE_LIB !IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 SHELL_CORE_LIB = $(SQLITE3LIB) # <<mark>> !ELSEIF $(USE_AMALGAMATION)==0 SHELL_CORE_LIB = libsqlite3.lib # <</mark>> !ELSE SHELL_CORE_LIB = !ENDIF !ENDIF # These are additional linker options used for the shell executable. # !IFNDEF SHELL_LINK_OPTS SHELL_LINK_OPTS = $(SHELL_CORE_LIB) !ENDIF # Check if assembly code listings should be generated for the source # code files to be compiled. # !IF $(USE_LISTINGS)!=0 TCC = $(TCC) -FAcs !ENDIF # C compiler options for the Windows 10 platform (needs MSVC 2015). # !IF $(FOR_WIN10)!=0 TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE !ENDIF # Also, we need to dynamically link to the correct MSVC runtime # when compiling for WinRT (e.g. debug or release) OR if the # USE_CRT_DLL option is set to force dynamically linking to the # MSVC runtime library. # !IF $(USE_CRT_DLL)!=0 !IF $(DEBUG)>1 TCC = $(TCC) -MDd BCC = $(BCC) -MDd ZLIBCFLAGS = -nologo -MDd -W3 -O2 -Oy- -Zi !ELSE TCC = $(TCC) -MD BCC = $(BCC) -MD ZLIBCFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi !ENDIF !ELSE !IF $(DEBUG)>1 TCC = $(TCC) -MTd BCC = $(BCC) -MTd ZLIBCFLAGS = -nologo -MTd -W3 -O2 -Oy- -Zi !ELSE TCC = $(TCC) -MT BCC = $(BCC) -MT ZLIBCFLAGS = -nologo -MT -W3 -O2 -Oy- -Zi !ENDIF !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in # any extension header files by default. For non-amalgamation # builds, we need to make sure the compiler can find these. # !IF $(USE_AMALGAMATION)==0 TCC = $(TCC) -I$(TOP)\ext\fts3 RCC = $(RCC) -I$(TOP)\ext\fts3 TCC = $(TCC) -I$(TOP)\ext\rtree RCC = $(RCC) -I$(TOP)\ext\rtree TCC = $(TCC) -I$(TOP)\ext\session RCC = $(RCC) -I$(TOP)\ext\session !ENDIF # The mksqlite3c.tcl script accepts some options on the command # line. When compiling with debugging enabled, some of these # options are necessary in order to allow debugging symbols to # work correctly with Visual Studio when using the amalgamation. # !IFNDEF MKSQLITE3C_TOOL !IF $(MINIMAL_AMALGAMATION)!=0 MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c-noext.tcl !ELSE MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c.tcl !ENDIF !ENDIF !IFNDEF MKSQLITE3C_ARGS !IF $(DEBUG)>1 && $(NO_LINEMACROS)==0 MKSQLITE3C_ARGS = --linemacros=1 !ELSE MKSQLITE3C_ARGS = --linemacros=0 !ENDIF !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 MKSQLITE3C_ARGS = $(MKSQLITE3C_ARGS) --useapicall !ENDIF !ENDIF # The mksqlite3h.tcl script accepts some options on the command line. # When compiling with stdcall support, some of these options are # necessary. # !IFNDEF MKSQLITE3H_ARGS !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 MKSQLITE3H_ARGS = --useapicall !ELSE MKSQLITE3H_ARGS = !ENDIF !ENDIF # <</mark>> !IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0 TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1 RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1 !ENDIF !IF $(DEBUG)>2 TCC = $(TCC) -DSQLITE_DEBUG=1 -DSQLITE_USE_W32_FOR_CONSOLE_IO RCC = $(RCC) -DSQLITE_DEBUG=1 !IF $(DYNAMIC_SHELL)==0 TCC = $(TCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE RCC = $(RCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE !ENDIF !ENDIF !IF $(DEBUG)>4 || $(OSTRACE)!=0 TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1 RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1 !ENDIF !IF $(DEBUG)>5 TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1 RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1 !ENDIF # Prevent warnings about "insecure" MSVC runtime library functions # being used. # TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS # Prevent warnings about "deprecated" POSIX functions being used. # TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS # Use the SQLite debugging heap subsystem? # !IF $(MEMDEBUG)!=0 TCC = $(TCC) -DSQLITE_MEMDEBUG=1 RCC = $(RCC) -DSQLITE_MEMDEBUG=1 # Use native Win32 heap subsystem instead of malloc/free? # !ELSEIF $(WIN32HEAP)!=0 TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1 RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1 # Validate the heap on every call into the native Win32 heap subsystem? # !IF $(DEBUG)>3 TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 !ENDIF !ENDIF # Address sanitizer if ASAN=1 # !IF $(ASAN)>0 TCC = $(TCC) /fsanitize=address !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # The locations of the Tcl header and library files. Also, the library that # non-stubs enabled programs using Tcl must link against. These variables # (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment # prior to running nmake in order to match the actual installed location and # version on this machine. # !IF $(STATICALLY_LINK_TCL)!=0 TCLSUFFIX = s !ENDIF !IFNDEF TCLSUFFIX TCLSUFFIX = !ENDIF !IFNDEF TCLDIR TCLDIR = C:\Tcl !ENDIF !IFNDEF TCLVERSION !IF EXISTS("$(TCLDIR)\lib\tcl90$(TCLSUFFIX).lib") TCLVERSION = 90 !ELSEIF EXISTS("$(TCLDIR)\lib\tcl86$(TCLSUFFIX).lib") TCLVERSION = 86 !ELSEIF EXISTS("$(TCLDIR)\lib\tcl86t.lib") TCLSUFFIX = t TCLVERSION = 86 !ELSE TCLVERSION = 90 !ENDIF !ENDIF !IFNDEF TCLINCDIR TCLINCDIR = $(TCLDIR)\include !ENDIF !IFNDEF TCLLIBDIR TCLLIBDIR = $(TCLDIR)\lib !ENDIF !IFNDEF LIBTCL LIBTCL = tcl$(TCLVERSION)$(TCLSUFFIX).lib !ENDIF !IFNDEF TCLLIBS !IF $(STATICALLY_LINK_TCL)!=0 TCLLIBS = /NODEFAULTLIB:libucrt.lib netapi32.lib user32.lib ucrt.lib !ELSE TCLLIBS = !ENDIF !ENDIF !IFNDEF LIBTCLSTUB !IF EXISTS("$(TCLLIBDIR)\tclstub$(TCLVERSION)$(TCLSUFFIX).lib") LIBTCLSTUB = tclstub$(TCLVERSION)$(TCLSUFFIX).lib !ELSEIF EXISTS("$(TCLLIBDIR)\tclstub$(TCLSUFFIX).lib") LIBTCLSTUB = tclstub$(TCLSUFFIX).lib !ELSEIF EXISTS("$(TCLLIBDIR)\tclstub$(TCLVERSION).lib") LIBTCLSTUB = tclstub$(TCLVERSION).lib !ELSE LIBTCLSTUB = tclstub.lib !ENDIF !ENDIF !IFNDEF LIBTCLPATH LIBTCLPATH = $(TCLDIR)\bin !ENDIF # The locations of the zlib header and library files. These variables # (ZLIBINCDIR, ZLIBLIBDIR, and ZLIBLIB) may be overridden via the environment # prior to running nmake in order to match the actual installed (or source # code) location on this machine. # !IFNDEF ZLIBDIR ZLIBDIR = $(TOP)\compat\zlib !ENDIF !IFNDEF ZLIBINCDIR ZLIBINCDIR = $(ZLIBDIR) !ENDIF !IFNDEF ZLIBLIBDIR ZLIBLIBDIR = $(ZLIBDIR) !ENDIF !IFNDEF ZLIBLIB !IF $(DYNAMIC_SHELL)!=0 ZLIBLIB = zdll.lib !ELSE ZLIBLIB = zlib.lib !ENDIF !ENDIF # The locations of the ICU header and library files. These variables # (ICUINCDIR, ICULIBDIR, and LIBICU) may be overridden via the environment # prior to running nmake in order to match the actual installed location on # this machine. # !IFNDEF ICUDIR ICUDIR = $(TOP)\compat\icu !ENDIF !IFNDEF ICUINCDIR ICUINCDIR = $(ICUDIR)\include !ENDIF !IFNDEF ICULIBDIR ICULIBDIR = $(ICUDIR)\lib !ENDIF !IFNDEF LIBICU LIBICU = icuuc.lib icuin.lib !ENDIF # This is the command to use for tclsh - normally just "tclsh", but we may # know the specific version we want to use. This variable (TCLSH_CMD) may be # overridden via the environment prior to running nmake in order to select a # specific Tcl shell to use. # !IFNDEF TCLSH_CMD !IF EXISTS("$(TCLDIR)\bin\tclsh$(TCLVERSION).exe") TCLSH_CMD = $(TCLDIR)\bin\tclsh$(TCLVERSION).exe !ELSEIF EXISTS("$(TCLDIR)\bin\tclsh90.exe") TCLSH_CMD = $(TCLDIR)\bin\tclsh90.exe !ELSEIF EXISTS("$(TCLDIR)\bin\tclsh86.exe") TCLSH_CMD = $(TCLDIR)\bin\tclsh86.exe !ELSEIF EXISTS("$(TCLDIR)\bin\tclsh86t.exe") TCLSH_CMD = $(TCLDIR)\bin\tclsh86t.exe !ELSEIF EXISTS("$(TCLDIR)\bin\tclsh.exe") TCLSH_CMD = $(TCLDIR)\bin\tclsh.exe !ELSE TCLSH_CMD = tclsh !ENDIF !ENDIF # A light-weight TCLSH replacement that can be used for code generation # but which is not adequate for testing. This is "jimsh0" by default, # with source code in the repository. To force the whole build to use # the full, official tclsh, add WITHOUT_JIMSH=1 to the nmake command line. # !IFDEF WITHOUT_JIMSH JIM_TCLSH = $(TCLSH_CMD) !ENDIF !IFNDEF JIM_TCLSH JIM_TCLSH = jimsh0.exe !ENDIF # <</mark>> # Compiler options needed for programs that use the readline() library. # !IFNDEF READLINE_FLAGS READLINE_FLAGS = -DHAVE_READLINE=0 !ENDIF # The library that programs using readline() must link against. # !IFNDEF LIBREADLINE LIBREADLINE = !ENDIF # Should the database engine be compiled threadsafe # TCC = $(TCC) -DSQLITE_THREADSAFE=1 RCC = $(RCC) -DSQLITE_THREADSAFE=1 # Do threads override each others locks by default (1), or do we test (-1) # TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 # Any target libraries which libsqlite must be linked against # !IFNDEF TLIBS TLIBS = !ENDIF # Enable/disable loadable extensions, and other optional features # based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). # The same set of OMIT and ENABLE flags should be passed to the # LEMON parser generator and the mkkeywordhash tool as well. # These are the required SQLite compilation options used when compiling for # the Windows platform. # REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100 # If we are linking to the RPCRT4 library, enable features that need it. # !IF $(USE_RPCRT4_LIB)!=0 REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1 !ENDIF # Add the required and optional SQLite compilation options into the command # lines used to invoke the MSVC code and resource compilers. # TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) # Add in any optional parameters specified on the commane line, e.g. # nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1" # TCC = $(TCC) $(OPTS) RCC = $(RCC) $(OPTS) # If compiling for debugging, add some defines. # !IF $(DEBUG)>1 TCC = $(TCC) -D_DEBUG BCC = $(BCC) -D_DEBUG RCC = $(RCC) -D_DEBUG !ENDIF # If optimizations are enabled or disabled (either implicitly or # explicitly), add the necessary flags. # !IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0 TCC = $(TCC) -Od BCC = $(BCC) -Od !IF $(USE_RUNTIME_CHECKS)!=0 TCC = $(TCC) -RTC1 BCC = $(BCC) -RTC1 !ENDIF !ELSEIF $(OPTIMIZATIONS)>=3 TCC = $(TCC) -Ox BCC = $(BCC) -Ox !ELSEIF $(OPTIMIZATIONS)==2 TCC = $(TCC) -O2 BCC = $(BCC) -O2 !ELSEIF $(OPTIMIZATIONS)==1 TCC = $(TCC) -O1 BCC = $(BCC) -O1 !ENDIF # If symbols are enabled (or compiling for debugging), enable PDBs. # !IF $(DEBUG)>1 || $(SYMBOLS)!=0 TCC = $(TCC) -Zi BCC = $(BCC) -Zi !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # If zlib support is enabled, add the compiler options for it. # !IF $(USE_ZLIB)!=0 TCC = $(TCC) -DSQLITE_HAVE_ZLIB=1 RCC = $(RCC) -DSQLITE_HAVE_ZLIB=1 TCC = $(TCC) -I$(ZLIBINCDIR) RCC = $(RCC) -I$(ZLIBINCDIR) !ENDIF # If ICU support is enabled, add the compiler options for it. # !IF $(USE_ICU)!=0 TCC = $(TCC) -DSQLITE_ENABLE_ICU=1 RCC = $(RCC) -DSQLITE_ENABLE_ICU=1 TCC = $(TCC) -I$(TOP)\ext\icu RCC = $(RCC) -I$(TOP)\ext\icu TCC = $(TCC) -I$(ICUINCDIR) RCC = $(RCC) -I$(ICUINCDIR) !ENDIF # <</mark>> # Command line prefixes for compiling code, compiling resources, # linking, etc. # LTCOMPILE = $(TCC) -Fo$@ -Fd$*.pdb LTRCOMPILE = $(RCC) -r LTLIB = lib.exe LTLINK = $(TCC) -Fe$@ # If requested, link to the RPCRT4 library. # !IF $(USE_RPCRT4_LIB)!=0 LTLIBS = $(LTLIBS) rpcrt4.lib !ENDIF # If a platform was set, force the linker to target that. # Note that the vcvars*.bat family of batch files typically # set this for you. Otherwise, the linker will attempt # to deduce the binary type based on the object files. !IFDEF PLATFORM LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM) LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM) !ELSEIF "$(VISUALSTUDIOVERSION)"=="12.0" || \ "$(VISUALSTUDIOVERSION)"=="14.0" || \ "$(VISUALSTUDIOVERSION)"=="15.0" LTLINKOPTS = /NOLOGO /MACHINE:x86 LTLIBOPTS = /NOLOGO /MACHINE:x86 !ELSE LTLINKOPTS = /NOLOGO LTLIBOPTS = /NOLOGO !ENDIF # When compiling for UWP or the Windows 10 platform, some extra linker # options are also required. # !IF $(FOR_UWP)!=0 || $(FOR_WIN10)!=0 LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib LTLINKOPTS = $(LTLINKOPTS) mincore.lib !IFDEF PSDKLIBPATH LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)" !ENDIF !ENDIF !IF $(FOR_WIN10)!=0 LTLINKOPTS = $(LTLINKOPTS) /guard:cf "/LIBPATH:$(UCRTLIBPATH)" !IF $(DEBUG)>1 LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib !ELSE LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib !ENDIF !ENDIF # If either debugging or symbols are enabled, enable PDBs. # !IF $(DEBUG)>1 || $(SYMBOLS)!=0 LDFLAGS = /NODEFAULTLIB:msvcrt /DEBUG $(LDOPTS) !ELSE LDFLAGS = /NODEFAULTLIB:msvcrt $(LDOPTS) !ENDIF # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # Start with the Tcl related linker options. # !IF $(NO_TCL)==0 TCLLIBPATHS = $(TCLLIBPATHS) /LIBPATH:$(TCLLIBDIR) TCLLIBS = $(TCLLIBS) $(LIBTCL) !ENDIF # If zlib support is enabled, add the linker options for it. # !IF $(USE_ZLIB)!=0 LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ZLIBLIBDIR) LTLIBS = $(LTLIBS) $(ZLIBLIB) !ENDIF # If ICU support is enabled, add the linker options for it. # !IF $(USE_ICU)!=0 LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ICULIBDIR) LTLIBS = $(LTLIBS) $(LIBICU) !ENDIF # <</mark>> # You should not have to change anything below this line ############################################################################### # <<mark>> # ^^^^^^^^-- content between mark and /mark omitted from autoconf/Makefile.msc # # Object files for the SQLite library (non-amalgamation). # LIBOBJS0 = vdbe.lo parse.lo alter.lo analyze.lo attach.lo auth.lo \ backup.lo bitvec.lo btmutex.lo btree.lo build.lo \ callback.lo carray.lo complete.lo ctime.lo \ date.lo dbpage.lo dbstat.lo delete.lo \ expr.lo fault.lo fkey.lo \ fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \ fts3_porter.lo fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo \ fts3_tokenize_vtab.lo fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \ fts5.lo \ func.lo global.lo hash.lo \ icu.lo insert.lo json.lo legacy.lo loadext.lo \ main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \ memdb.lo memjournal.lo \ mutex.lo mutex_noop.lo mutex_unix.lo mutex_w32.lo \ notify.lo opcodes.lo os.lo os_kv.lo os_unix.lo os_win.lo \ pager.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \ random.lo resolve.lo rowset.lo rtree.lo \ sqlite3session.lo select.lo sqlite3rbu.lo status.lo stmt.lo \ table.lo threads.lo tokenize.lo treeview.lo trigger.lo \ update.lo upsert.lo util.lo vacuum.lo \ vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \ vdbetrace.lo vdbevtab.lo wal.lo walker.lo where.lo wherecode.lo \ whereexpr.lo \ window.lo utf.lo vtab.lo # <</mark>> # Object files for the amalgamation. # LIBOBJS1 = sqlite3.lo # Determine the real value of LIBOBJ based on the 'configure' script # # <<mark>> !IF $(USE_AMALGAMATION)==0 LIBOBJ = $(LIBOBJS0) !ELSE # <</mark>> LIBOBJ = $(LIBOBJS1) # <<mark>> !ENDIF # <</mark>> # Determine if embedded resource compilation and usage are enabled. # !IF $(USE_RC)!=0 LIBRESOBJS = sqlite3res.lo !ELSE LIBRESOBJS = !ENDIF # <<mark>> # Core source code files, part 1. # SRC00 = \ $(TOP)\src\alter.c \ $(TOP)\src\analyze.c \ $(TOP)\src\attach.c \ $(TOP)\src\auth.c \ $(TOP)\src\backup.c \ $(TOP)\src\bitvec.c \ $(TOP)\src\btmutex.c \ $(TOP)\src\btree.c \ $(TOP)\src\build.c \ $(TOP)\src\callback.c \ $(TOP)\src\carray.c \ $(TOP)\src\complete.c \ ctime.c \ $(TOP)\src\date.c \ $(TOP)\src\dbpage.c \ $(TOP)\src\dbstat.c \ $(TOP)\src\delete.c \ $(TOP)\src\expr.c \ $(TOP)\src\fault.c \ $(TOP)\src\fkey.c \ $(TOP)\src\func.c \ $(TOP)\src\global.c \ $(TOP)\src\hash.c \ $(TOP)\src\insert.c \ $(TOP)\src\json.c \ $(TOP)\src\legacy.c \ $(TOP)\src\loadext.c \ $(TOP)\src\main.c \ $(TOP)\src\malloc.c \ $(TOP)\src\mem0.c \ $(TOP)\src\mem1.c \ $(TOP)\src\mem2.c \ $(TOP)\src\mem3.c \ $(TOP)\src\mem5.c \ $(TOP)\src\memdb.c \ $(TOP)\src\memjournal.c \ $(TOP)\src\mutex.c \ $(TOP)\src\mutex_noop.c \ $(TOP)\src\mutex_unix.c \ $(TOP)\src\mutex_w32.c \ $(TOP)\src\notify.c \ $(TOP)\src\os.c \ $(TOP)\src\os_kv.c \ $(TOP)\src\os_unix.c \ $(TOP)\src\os_win.c # Core source code files, part 2. # SRC01 = \ $(TOP)\src\pager.c \ $(TOP)\src\pcache.c \ $(TOP)\src\pcache1.c \ $(TOP)\src\pragma.c \ $(TOP)\src\prepare.c \ $(TOP)\src\printf.c \ $(TOP)\src\random.c \ $(TOP)\src\resolve.c \ $(TOP)\src\rowset.c \ $(TOP)\src\select.c \ $(TOP)\src\status.c \ $(TOP)\src\table.c \ $(TOP)\src\threads.c \ tclsqlite-ex.c \ $(TOP)\src\tokenize.c \ $(TOP)\src\treeview.c \ $(TOP)\src\trigger.c \ $(TOP)\src\utf.c \ $(TOP)\src\update.c \ $(TOP)\src\upsert.c \ $(TOP)\src\util.c \ $(TOP)\src\vacuum.c \ $(TOP)\src\vdbe.c \ $(TOP)\src\vdbeapi.c \ $(TOP)\src\vdbeaux.c \ $(TOP)\src\vdbeblob.c \ $(TOP)\src\vdbemem.c \ $(TOP)\src\vdbesort.c \ $(TOP)\src\vdbetrace.c \ $(TOP)\src\vdbevtab.c \ $(TOP)\src\vtab.c \ $(TOP)\src\wal.c \ $(TOP)\src\walker.c \ $(TOP)\src\where.c \ $(TOP)\src\wherecode.c \ $(TOP)\src\whereexpr.c \ $(TOP)\src\window.c # Core miscellaneous files. # SRC03 = \ $(TOP)\src\parse.y # Core header files, part 1. # SRC04 = \ $(TOP)\src\btree.h \ $(TOP)\src\btreeInt.h \ $(TOP)\src\hash.h \ $(TOP)\src\hwtime.h \ $(TOP)\src\msvc.h \ $(TOP)\src\mutex.h \ $(TOP)\src\os.h \ $(TOP)\src\os_common.h \ $(TOP)\src\os_setup.h \ $(TOP)\src\os_win.h # Core header files, part 2. # SRC05 = \ $(TOP)\src\pager.h \ $(TOP)\src\pcache.h \ pragma.h \ $(TOP)\src\sqlite.h.in \ $(TOP)\src\sqlite3ext.h \ $(TOP)\src\sqliteInt.h \ $(TOP)\src\sqliteLimit.h \ $(TOP)\src\vdbe.h \ $(TOP)\src\vdbeInt.h \ $(TOP)\src\vxworks.h \ $(TOP)\src\wal.h \ $(TOP)\src\whereInt.h # Extension source code files, part 2. # SRC07 = \ $(TOP)\ext\fts3\fts3.c \ $(TOP)\ext\fts3\fts3_aux.c \ $(TOP)\ext\fts3\fts3_expr.c \ $(TOP)\ext\fts3\fts3_hash.c \ $(TOP)\ext\fts3\fts3_icu.c \ $(TOP)\ext\fts3\fts3_porter.c \ $(TOP)\ext\fts3\fts3_snippet.c \ $(TOP)\ext\fts3\fts3_tokenizer.c \ $(TOP)\ext\fts3\fts3_tokenizer1.c \ $(TOP)\ext\fts3\fts3_tokenize_vtab.c \ $(TOP)\ext\fts3\fts3_unicode.c \ $(TOP)\ext\fts3\fts3_unicode2.c \ $(TOP)\ext\fts3\fts3_write.c \ $(TOP)\ext\icu\icu.c \ $(TOP)\ext\rtree\rtree.c \ $(TOP)\ext\session\sqlite3session.c \ $(TOP)\ext\rbu\sqlite3rbu.c \ $(TOP)\ext\misc\stmt.c # Extension header files, part 2. # SRC09 = \ $(TOP)\ext\fts3\fts3.h \ $(TOP)\ext\fts3\fts3Int.h \ $(TOP)\ext\fts3\fts3_hash.h \ $(TOP)\ext\fts3\fts3_tokenizer.h \ $(TOP)\ext\icu\sqliteicu.h \ $(TOP)\ext\rtree\rtree.h \ $(TOP)\ext\rtree\geopoly.c \ $(TOP)\ext\rbu\sqlite3rbu.h \ $(TOP)\ext\session\sqlite3session.h # Generated source code files # SRC10 = \ opcodes.c \ parse.c # Generated header files # SRC11 = \ keywordhash.h \ opcodes.h \ parse.h \ shell.c \ $(SQLITE3H) # Generated Tcl header files # !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 SRC12 = \ $(SQLITETCLH) \ $(SQLITETCLDECLSH) !ELSE SRC12 = !ENDIF # All source code files. # SRC = $(SRC00) $(SRC01) $(SRC03) $(SRC04) $(SRC05) $(SRC07) $(SRC09) $(SRC10) $(SRC11) $(SRC12) # Source code to the test files. # TESTSRC = \ $(TOP)\src\test1.c \ $(TOP)\src\test2.c \ $(TOP)\src\test3.c \ $(TOP)\src\test4.c \ $(TOP)\src\test5.c \ $(TOP)\src\test6.c \ $(TOP)\src\test8.c \ $(TOP)\src\test9.c \ $(TOP)\src\test_autoext.c \ $(TOP)\src\test_backup.c \ $(TOP)\src\test_bestindex.c \ $(TOP)\src\test_blob.c \ $(TOP)\src\test_btree.c \ $(TOP)\src\test_config.c \ $(TOP)\src\test_delete.c \ $(TOP)\src\test_demovfs.c \ $(TOP)\src\test_devsym.c \ $(TOP)\src\test_fs.c \ $(TOP)\src\test_func.c \ $(TOP)\src\test_hexio.c \ $(TOP)\src\test_init.c \ $(TOP)\src\test_intarray.c \ $(TOP)\src\test_journal.c \ $(TOP)\src\test_malloc.c \ $(TOP)\src\test_md5.c \ $(TOP)\src\test_multiplex.c \ $(TOP)\src\test_mutex.c \ $(TOP)\src\test_onefile.c \ $(TOP)\src\test_osinst.c \ $(TOP)\src\test_pcache.c \ $(TOP)\src\test_quota.c \ $(TOP)\src\test_rtree.c \ $(TOP)\src\test_schema.c \ $(TOP)\src\test_superlock.c \ $(TOP)\src\test_syscall.c \ $(TOP)\src\test_tclsh.c \ $(TOP)\src\test_tclvar.c \ $(TOP)\src\test_thread.c \ $(TOP)\src\test_vdbecov.c \ $(TOP)\src\test_vfs.c \ $(TOP)\src\test_window.c \ $(TOP)\src\test_wsd.c \ $(TOP)\ext\fts3\fts3_term.c \ $(TOP)\ext\fts3\fts3_test.c \ $(TOP)\ext\rbu\test_rbu.c \ $(TOP)\ext\session\test_session.c # Statically linked extensions. # TESTEXT = \ $(TOP)\ext\expert\sqlite3expert.c \ $(TOP)\ext\expert\test_expert.c \ $(TOP)\ext\misc\amatch.c \ $(TOP)\ext\misc\appendvfs.c \ $(TOP)\ext\misc\basexx.c \ $(TOP)\ext\misc\cksumvfs.c \ $(TOP)\ext\misc\closure.c \ $(TOP)\ext\misc\csv.c \ $(TOP)\ext\misc\decimal.c \ $(TOP)\ext\misc\eval.c \ $(TOP)\ext\misc\explain.c \ $(TOP)\ext\misc\fileio.c \ $(TOP)\ext\misc\fuzzer.c \ $(TOP)\ext\fts5\fts5_tcl.c \ $(TOP)\ext\fts5\fts5_test_mi.c \ $(TOP)\ext\fts5\fts5_test_tok.c \ $(TOP)\ext\misc\ieee754.c \ $(TOP)\ext\misc\mmapwarm.c \ $(TOP)\ext\misc\nextchar.c \ $(TOP)\ext\misc\normalize.c \ $(TOP)\ext\misc\prefixes.c \ $(TOP)\ext\misc\qpvtab.c \ $(TOP)\ext\misc\randomjson.c \ $(TOP)\ext\misc\regexp.c \ $(TOP)\ext\misc\remember.c \ $(TOP)\ext\misc\series.c \ $(TOP)\ext\misc\spellfix.c \ $(TOP)\ext\misc\stmtrand.c \ $(TOP)\ext\misc\totype.c \ $(TOP)\ext\misc\unionvtab.c \ $(TOP)\ext\misc\wholenumber.c \ $(TOP)\ext\rtree\test_rtreedoc.c \ $(TOP)\ext\recover\sqlite3recover.c \ $(TOP)\ext\recover\test_recover.c \ $(TOP)\ext\intck\test_intck.c \ $(TOP)\ext\intck\sqlite3intck.c \ $(TOP)\ext\recover\dbdata.c # If use of zlib is enabled, add the "zipfile.c" source file. # !IF $(USE_ZLIB)!=0 TESTEXT = $(TESTEXT) $(TOP)\ext\misc\zipfile.c !ENDIF # Source code to the library files needed by the test fixture # (non-amalgamation) # TESTSRC2 = \ $(SRC00) \ $(SRC01) \ $(SRC07) \ $(SRC10) \ fts5.c # Header files used by all library source files. # HDR = \ $(TOP)\src\btree.h \ $(TOP)\src\btreeInt.h \ $(TOP)\src\hash.h \ $(TOP)\src\hwtime.h \ keywordhash.h \ $(TOP)\src\msvc.h \ $(TOP)\src\mutex.h \ opcodes.h \ $(TOP)\src\os.h \ $(TOP)\src\os_common.h \ $(TOP)\src\os_setup.h \ $(TOP)\src\os_win.h \ $(TOP)\src\pager.h \ $(TOP)\src\pcache.h \ parse.h \ pragma.h \ $(SQLITE3H) \ sqlite3ext.h \ $(TOP)\src\sqliteInt.h \ $(TOP)\src\sqliteLimit.h \ $(TOP)\src\vdbe.h \ $(TOP)\src\vdbeInt.h \ $(TOP)\src\vxworks.h \ $(TOP)\src\whereInt.h # Header files used by extensions # EXTHDR = $(EXTHDR) \ $(TOP)\ext\fts3\fts3.h \ $(TOP)\ext\fts3\fts3Int.h \ $(TOP)\ext\fts3\fts3_hash.h \ $(TOP)\ext\fts3\fts3_tokenizer.h EXTHDR = $(EXTHDR) \ $(TOP)\ext\rtree\rtree.h \ $(TOP)\ext\rtree\geopoly.c EXTHDR = $(EXTHDR) \ $(TOP)\ext\icu\sqliteicu.h EXTHDR = $(EXTHDR) \ $(TOP)\ext\rtree\sqlite3rtree.h EXTHDR = $(EXTHDR) \ $(TOP)\ext\session\sqlite3session.h # executables needed for testing # TESTPROGS = \ testfixture.exe \ $(SQLITE3EXE) \ sqlite3_analyzer.exe \ sqlite3_checker.exe \ sqldiff.exe \ dbhash.exe \ sqltclsh.exe # Databases containing fuzzer test cases # FUZZDATA = \ $(TOP)\test\fuzzdata1.db \ $(TOP)\test\fuzzdata2.db \ $(TOP)\test\fuzzdata3.db \ $(TOP)\test\fuzzdata4.db \ $(TOP)\test\fuzzdata5.db \ $(TOP)\test\fuzzdata6.db \ $(TOP)\test\fuzzdata7.db \ $(TOP)\test\fuzzdata8.db # <</mark>> # Additional compiler options for the shell. These are only effective # when the shell is not being dynamically linked. # !IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_DQS=0 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_FTS4=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_PERCENTILE=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_STMT_SCANSTATUS=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB=1 SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_STRICT_SUBTYPE=1 !ENDIF # <<mark>> # Extra compiler options for various test tools. # MPTESTER_COMPILE_OPTS = -DSQLITE_ENABLE_FTS5 FUZZERSHELL_COMPILE_OPTS = FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -I$(TOP)\test -I$(TOP)\ext\recover FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_MEMSYS5 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_OSS_FUZZ FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_DECIMAL_MAX_DIGIT=1000 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_CARRAY FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_DBPAGE_VTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_DBSTAT_VTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_DESERIALIZE FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS3_PARENTHESIS FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS4 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS5 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_GEOPOLY FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_MATH_FUNCTIONS FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_MEMSYS5 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_NORMALIZE FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_PERCENTILE FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_PREUPDATE_HOOK FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_RTREE FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_SESSION FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_STMTVTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_STAT4 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_STMT_SCANSTATUS FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_MAX_MEMORY=50000000 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_MAX_MMAP_SIZE=0 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_PRINTF_PRECISION_LIMIT=1000 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_PRIVATE="" FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_STRICT_SUBTYPE=1 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_STATIC_RANDOMJSON FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_MAX_MEMORY=50000000 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_PRINTF_PRECISION_LIMIT=1000 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS4 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS5 FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_RTREE FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_GEOPOLY FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_DBSTAT_VTAB FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\fuzzcheck.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\ossfuzz.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\fuzzinvariants.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\vt02.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\recover\dbdata.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\recover\sqlite3recover.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\base64.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\base85.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\completion.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\decimal.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\ieee754.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\randomjson.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\regexp.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\series.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\shathree.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\sha1.c FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\misc\stmtrand.c OSSSHELL_SRC = $(TOP)\test\ossshell.c $(TOP)\test\ossfuzz.c DBFUZZ_COMPILE_OPTS = -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION KV_COMPILE_OPTS = -DSQLITE_THREADSAFE=0 -DSQLITE_DIRECT_OVERFLOW_READ ST_COMPILE_OPTS = -DSQLITE_THREADSAFE=0 # Standard options to testfixture. # TESTOPTS = --verbose=file --output=test-out.txt # Extra targets for the "all" target that require Tcl. # !IF $(NO_TCL)==0 ALL_TCL_TARGETS = $(SQLITE3TCLDLL) !ELSE ALL_TCL_TARGETS = !ENDIF # <</mark>> # This is the default Makefile target. The objects listed here # are what get build when you type just "make" with no arguments. # core: dll libsqlite3.lib shell # Targets that require the Tcl library. # tcl: $(ALL_TCL_TARGETS) # This Makefile target builds all of the standard binaries. # all: core tcl # Dynamic link library section. # dll: $(SQLITE3DLL) # Shell executable. # shell: $(SQLITE3EXE) # jimsh0 - replacement for tclsh # jimsh0.exe: $(TOP)\autosetup\jimsh0.c cl -DHAVE__FULLPATH=1 $(TOP)\autosetup\jimsh0.c # <<mark>> libsqlite3.lib: $(LIBOBJ) $(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS) libtclsqlite3.lib: tclsqlite.lo libsqlite3.lib $(LTLIB) $(LTLIBOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCLSTUB) $(TLIBS) tclsqlite3.def: tclsqlite.lo echo EXPORTS > tclsqlite3.def dumpbin /all tclsqlite.lo \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl include "^\s+/EXPORT:_?((?:Sqlite3|Tclsqlite3)_[^@]*)(?:@\d+)?$$" \1 \ | sort >> tclsqlite3.def pkgIndex.tcl: $(TOP)\VERSION for /F %%V in ('type "$(TOP)\VERSION"') do ( \ echo package ifneeded sqlite3 @version@ [list load [file join $$dir $(SQLITE3TCLDLL)] Sqlite3] \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact @version@ %%V > pkgIndex.tcl \ ) $(SQLITE3TCLDLL): libtclsqlite3.lib $(LIBRESOBJS) tclsqlite3.def pkgIndex.tcl $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /DEF:tclsqlite3.def /OUT:$@ libtclsqlite3.lib $(LIBRESOBJS) $(LTLIBS) $(TLIBS) tclextension: $(SQLITE3TCLDLL) tclextension-install: $(SQLITE3TCLDLL) $(TCLSH_CMD) $(TOP)\tool\buildtclext.tcl --install-only tclextension-uninstall: $(TCLSH_CMD) $(TOP)\tool\buildtclext.tcl --uninstall tclextension-list: @ $(TCLSH_CMD) $(TOP)\tool\buildtclext.tcl --info tclextension-verify: sqlite3.h @ $(TCLSH_CMD) $(TOP)\tool\buildtclext.tcl --version-check # <</mark>> $(SQLITE3DLL): $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP) $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS) # <<block2>> sqlite3.def: libsqlite3.lib $(JIM_TCLSH) echo EXPORTS > sqlite3.def dumpbin /all libsqlite3.lib \ | $(JIM_TCLSH) $(TOP)\tool\replace.tcl include "^\s+1 _?(sqlite3(?:session|changeset|changegroup|rebaser|rbu)?_[^@]*)(?:@\d+)?$$" \1 \ | sort >> sqlite3.def # <</block2>> $(SQLITE3EXE): shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H) $(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) shell.c $(SHELL_CORE_SRC) \ /link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS) # <<mark>> sqldiff.exe: $(TOP)\tool\sqldiff.c $(TOP)\ext\misc\sqlite3_stdio.h $(TOP)\ext\misc\sqlite3_stdio.c $(SQLITE3C) $(SQLITE3H) $(LIBRESOBJS) $(TOP)\tool\winmain.c $(LTLINK) $(NO_WARN) -I$(TOP)\ext\misc $(TOP)\tool\sqldiff.c $(TOP)\ext\misc\sqlite3_stdio.c $(TOP)\tool\winmain.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) $(LIBRESOBJS) dbhash.exe: $(TOP)\tool\dbhash.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(TOP)\tool\dbhash.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) RSYNC_SRC = \ $(TOP)\tool\sqlite3_rsync.c \ $(SQLITE3C) RSYNC_OPT = \ -DSQLITE_ENABLE_DBPAGE_VTAB \ -DSQLITE_THREADSAFE=0 \ -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_OMIT_DEPRECATED sqlite3_rsync.exe: $(RSYNC_SRC) $(LIBRESOBJS) $(LTLINK) $(RSYNC_OPT) $(NO_WARN) $(RSYNC_SRC) /link $(LDFLAGS) $(LTLINKOPTS) $(LIBRESOBJS) scrub.exe: $(TOP)\ext\misc\scrub.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSCRUB_STANDALONE=1 $(TOP)\ext\misc\scrub.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) srcck1.exe: $(TOP)\tool\srcck1.c $(BCC) $(NO_WARN) -Fe$@ $(TOP)\tool\srcck1.c sourcetest: srcck1.exe $(SQLITE3C) srcck1.exe $(SQLITE3C) src-verify.exe: $(TOP)\tool\src-verify.c $(LTLINK) $(NO_WARN) $(TOP)\tool\src-verify.c verify-source: src-verify.exe src-verify.exe $(TOP) fuzzershell.exe: $(TOP)\tool\fuzzershell.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(FUZZERSHELL_COMPILE_OPTS) $(TOP)\tool\fuzzershell.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) dbfuzz.exe: $(TOP)\test\dbfuzz.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(DBFUZZ_COMPILE_OPTS) $(TOP)\test\dbfuzz.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) fuzzcheck.exe: $(FUZZCHECK_SRC) $(SQLITE3C) $(SQLITE3H) $(LTLINK) /F 8388608 $(NO_WARN) $(FUZZCHECK_OPTS) $(FUZZCHECK_SRC) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) fuzzcheck-asan.exe: $(FUZZCHECK_SRC) $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) /fsanitize=address $(FUZZCHECK_OPTS) $(FUZZCHECK_SRC) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) ossshell.exe: $(OSSSHELL_SRC) $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(FUZZCHECK_OPTS) $(OSSSHELL_SRC) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) sessionfuzz.exe: zlib $(TOP)\test\sessionfuzz.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -I$(ZLIBINCDIR) $(TOP)\test\sessionfuzz.c /link $(LDFLAGS) $(LTLINKOPTS) /LIBPATH:$(ZLIBLIBDIR) $(ZLIBLIB) mptester.exe: $(TOP)\mptest\mptest.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(MPTESTER_COMPILE_OPTS) $(TOP)\mptest\mptest.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) MPTEST1 = mptester mptest.db $(TOP)\mptest\crash01.test --repeat 20 MPTEST2 = mptester mptest.db $(TOP)\mptest\multiwrite01.test --repeat 20 mptest: mptester.exe del /Q mptest.db 2>NUL $(MPTEST1) --journalmode DELETE $(MPTEST2) --journalmode WAL $(MPTEST1) --journalmode WAL $(MPTEST2) --journalmode PERSIST $(MPTEST1) --journalmode PERSIST $(MPTEST2) --journalmode TRUNCATE $(MPTEST1) --journalmode TRUNCATE $(MPTEST2) --journalmode DELETE # This target creates a directory named "tsrc" and fills it with # copies of all of the C source code and header files needed to # build on the target system. Some of the C source code and header # files are automatically generated. This target takes care of # all that automatic generation. # .target_source: $(SRC) $(TOP)\tool\vdbe-compress.tcl fts5.c $(SQLITE_TCL_DEP) $(JIM_TCLSH) -rmdir /Q/S tsrc 2>NUL -mkdir tsrc $(JIM_TCLSH) $(TOP)\tool\cp.tcl $(SRC00) $(SRC01) $(SRC03) $(SRC04) $(SRC05) $(SRC07) $(SRC09) $(SRC10) $(SRC11) $(SRC12) fts5.c fts5.h tsrc copy /B tsrc\fts5.c +,, copy /B tsrc\fts5.h +,, del /Q tsrc\sqlite.h.in tsrc\parse.y 2>NUL $(JIM_TCLSH) $(TOP)\tool\vdbe-compress.tcl $(OPTS) < tsrc\vdbe.c > vdbe.new move vdbe.new tsrc\vdbe.c echo > .target_source sqlite3.c: .target_source sqlite3ext.h sqlite3session.h $(MKSQLITE3C_TOOL) src-verify.exe $(JIM_TCLSH) $(JIM_TCLSH) $(MKSQLITE3C_TOOL) $(MKSQLITE3C_ARGS) $(EXTRA_SRC) sqlite3-all.c: sqlite3.c $(TOP)\tool\split-sqlite3c.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\split-sqlite3c.tcl TCLSQLITEEX = \ $(TOP)\ext\qrf\qrf.h \ $(TOP)\ext\qrf\qrf.c \ $(TOP)\src\tclsqlite.c tclsqlite-ex.c: $(TCLSQLITEEX) $(TOP)\tool\mkcombo.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mkcombo.tcl $(TCLSQLITEEX) -o $@ # <</mark>> tclsqlite-ex.c: # Rule to build the amalgamation # sqlite3.lo: $(SQLITE3C) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C) # <<mark>> # Rules to build the LEMON compiler generator # lempar.c: $(TOP)\tool\lempar.c copy /Y $(TOP)\tool\lempar.c . copy /B lempar.c +,, lemon.exe: $(TOP)\tool\lemon.c lempar.c $(BCC) $(NO_WARN) -Daccess=_access \ -Fe$@ $(TOP)\tool\lemon.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS) # <<mark>> # Rules to build the source-id generator tool # mksourceid.exe: $(TOP)\tool\mksourceid.c $(BCC) $(NO_WARN) -Fe$@ $(TOP)\tool\mksourceid.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS) # Rules to build individual *.lo files from generated *.c files. This # applies to: # # parse.lo # opcodes.lo # parse.lo: parse.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c parse.c opcodes.lo: opcodes.c $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c opcodes.c # <</mark>> # Rule to build the Win32 resources object file. # !IF $(USE_RC)!=0 # <<block1>> $(LIBRESOBJS): $(TOP)\src\sqlite3.rc $(SQLITE3H) $(TOP)\VERSION $(JIM_TCLSH) echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h for /F %%V in ('type "$(TOP)\VERSION"') do ( \ echo #define SQLITE_RESOURCE_VERSION %%V \ | $(JIM_TCLSH) $(TOP)\tool\replace.tcl exact . ^, >> sqlite3rc.h \ ) echo #endif >> sqlite3rc.h $(LTRCOMPILE) -fo $(LIBRESOBJS) $(TOP)\src\sqlite3.rc # <</block1>> !ENDIF # <<mark>> # Rules to build individual *.lo files from files in the src directory. # alter.lo: $(TOP)\src\alter.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\alter.c analyze.lo: $(TOP)\src\analyze.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\analyze.c attach.lo: $(TOP)\src\attach.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\attach.c auth.lo: $(TOP)\src\auth.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\auth.c backup.lo: $(TOP)\src\backup.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\backup.c bitvec.lo: $(TOP)\src\bitvec.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\bitvec.c btmutex.lo: $(TOP)\src\btmutex.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btmutex.c btree.lo: $(TOP)\src\btree.c $(HDR) $(TOP)\src\pager.h $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btree.c build.lo: $(TOP)\src\build.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\build.c callback.lo: $(TOP)\src\callback.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\callback.c carray.lo: $(TOP)\src\carray.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\carray.c complete.lo: $(TOP)\src\complete.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\complete.c ctime.c: $(TOP)\tool\mkctimec.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mkctimec.tcl ctime.lo: ctime.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c ctime.c date.lo: $(TOP)\src\date.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\date.c dbpage.lo: $(TOP)\src\dbpage.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\dbpage.c dbstat.lo: $(TOP)\src\dbstat.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\dbstat.c delete.lo: $(TOP)\src\delete.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\delete.c expr.lo: $(TOP)\src\expr.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\expr.c fault.lo: $(TOP)\src\fault.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fault.c fkey.lo: $(TOP)\src\fkey.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fkey.c func.lo: $(TOP)\src\func.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\func.c global.lo: $(TOP)\src\global.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\global.c hash.lo: $(TOP)\src\hash.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\hash.c insert.lo: $(TOP)\src\insert.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\insert.c json.lo: $(TOP)\src\json.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\json.c legacy.lo: $(TOP)\src\legacy.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\legacy.c loadext.lo: $(TOP)\src\loadext.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\loadext.c main.lo: $(TOP)\src\main.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\main.c malloc.lo: $(TOP)\src\malloc.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\malloc.c mem0.lo: $(TOP)\src\mem0.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem0.c mem1.lo: $(TOP)\src\mem1.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem1.c mem2.lo: $(TOP)\src\mem2.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem2.c mem3.lo: $(TOP)\src\mem3.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem3.c mem5.lo: $(TOP)\src\mem5.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem5.c memdb.lo: $(TOP)\src\memdb.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memdb.c memjournal.lo: $(TOP)\src\memjournal.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memjournal.c mutex.lo: $(TOP)\src\mutex.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex.c mutex_noop.lo: $(TOP)\src\mutex_noop.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_noop.c mutex_unix.lo: $(TOP)\src\mutex_unix.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_unix.c mutex_w32.lo: $(TOP)\src\mutex_w32.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_w32.c notify.lo: $(TOP)\src\notify.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\notify.c pager.lo: $(TOP)\src\pager.c $(HDR) $(TOP)\src\pager.h $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pager.c pcache.lo: $(TOP)\src\pcache.c $(HDR) $(TOP)\src\pcache.h $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache.c pcache1.lo: $(TOP)\src\pcache1.c $(HDR) $(TOP)\src\pcache.h $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache1.c os.lo: $(TOP)\src\os.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os.c os_kv.lo: $(TOP)\src\os_kv.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_kv.c os_unix.lo: $(TOP)\src\os_unix.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_unix.c os_win.lo: $(TOP)\src\os_win.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_win.c pragma.lo: $(TOP)\src\pragma.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pragma.c prepare.lo: $(TOP)\src\prepare.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\prepare.c printf.lo: $(TOP)\src\printf.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\printf.c random.lo: $(TOP)\src\random.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\random.c resolve.lo: $(TOP)\src\resolve.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\resolve.c rowset.lo: $(TOP)\src\rowset.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\rowset.c select.lo: $(TOP)\src\select.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\select.c status.lo: $(TOP)\src\status.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\status.c table.lo: $(TOP)\src\table.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\table.c threads.lo: $(TOP)\src\threads.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\threads.c tokenize.lo: $(TOP)\src\tokenize.c keywordhash.h $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\tokenize.c treeview.lo: $(TOP)\src\treeview.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\treeview.c trigger.lo: $(TOP)\src\trigger.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\trigger.c update.lo: $(TOP)\src\update.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\update.c upsert.lo: $(TOP)\src\upsert.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\upsert.c utf.lo: $(TOP)\src\utf.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\utf.c util.lo: $(TOP)\src\util.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\util.c vacuum.lo: $(TOP)\src\vacuum.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vacuum.c vdbe.lo: $(TOP)\src\vdbe.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbe.c vdbeapi.lo: $(TOP)\src\vdbeapi.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeapi.c vdbeaux.lo: $(TOP)\src\vdbeaux.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeaux.c vdbeblob.lo: $(TOP)\src\vdbeblob.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeblob.c vdbemem.lo: $(TOP)\src\vdbemem.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbemem.c vdbesort.lo: $(TOP)\src\vdbesort.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbesort.c vdbetrace.lo: $(TOP)\src\vdbetrace.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbetrace.c vdbevtab.lo: $(TOP)\src\vdbevtab.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbevtab.c vtab.lo: $(TOP)\src\vtab.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vtab.c wal.lo: $(TOP)\src\wal.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wal.c walker.lo: $(TOP)\src\walker.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\walker.c where.lo: $(TOP)\src\where.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\where.c wherecode.lo: $(TOP)\src\wherecode.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wherecode.c whereexpr.lo: $(TOP)\src\whereexpr.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\whereexpr.c window.lo: $(TOP)\src\window.c $(HDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\window.c tclsqlite.lo: tclsqlite-ex.c $(HDR) $(SQLITE_TCL_DEP) $(LTCOMPILE) $(NO_WARN) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c tclsqlite-ex.c /OUT:tclsqlite.lo tclsqlite-shell.lo: tclsqlite-ex.c $(HDR) $(SQLITE_TCL_DEP) $(LTCOMPILE) $(NO_WARN) -DTCLSH -DBUILD_sqlite -I$(TCLINCDIR) -c tclsqlite-ex.c tclsqlite3.exe: tclsqlite-shell.lo $(SQLITE3C) $(SQLITE3H) $(LIBRESOBJS) $(LTLINK) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) /OUT:$@ tclsqlite-shell.lo $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS) # Rules to build opcodes.c and opcodes.h # opcodes.c: opcodes.h $(TOP)\tool\mkopcodec.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mkopcodec.tcl opcodes.h > opcodes.c opcodes.h: parse.h $(TOP)\src\vdbe.c $(TOP)\tool\mkopcodeh.tcl $(JIM_TCLSH) type parse.h $(TOP)\src\vdbe.c | $(JIM_TCLSH) $(TOP)\tool\mkopcodeh.tcl > opcodes.h # Rules to build parse.c and parse.h - the outputs of lemon. # parse.h: parse.c parse.c: $(TOP)\src\parse.y lemon.exe del /Q parse.y parse.h parse.h.temp 2>NUL copy /Y $(TOP)\src\parse.y . copy /B parse.y +,, .\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) -S parse.y pragma.h: $(TOP)\tool\mkpragmatab.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mkpragmatab.tcl $(SQLITE3H): $(TOP)\src\sqlite.h.in $(TOP)\manifest mksourceid.exe $(TOP)\VERSION $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mksqlite3h.tcl "$(TOP:\=/)" -o $(SQLITE3H) $(MKSQLITE3H_ARGS) sqlite3ext.h: .target_source !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 type tsrc\sqlite3ext.h | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*\)" "(SQLITE_CALLBACK *)" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*" "(SQLITE_APICALL *" > sqlite3ext.h copy /Y sqlite3ext.h tsrc\sqlite3ext.h !ELSE copy /Y tsrc\sqlite3ext.h sqlite3ext.h copy /B sqlite3ext.h +,, !ENDIF sqlite3session.h: $(TOP)\ext\session\sqlite3session.h copy /Y $(TOP)\ext\session\sqlite3session.h . copy /B sqlite3session.h +,, mkkeywordhash.exe: $(TOP)\tool\mkkeywordhash.c $(BCC) $(NO_WARN) -Fe$@ $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) \ $(TOP)\tool\mkkeywordhash.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS) keywordhash.h: $(TOP)\tool\mkkeywordhash.c mkkeywordhash.exe .\mkkeywordhash.exe > keywordhash.h # Source and header files that shell.c depends on SHELL_DEP = \ $(TOP)\src\shell.c.in \ $(TOP)\ext\qrf\qrf.c \ $(TOP)\ext\qrf\qrf.h \ $(TOP)\ext\expert\sqlite3expert.c \ $(TOP)\ext\expert\sqlite3expert.h \ $(TOP)\ext\intck\sqlite3intck.c \ $(TOP)\ext\intck\sqlite3intck.h \ $(TOP)\ext\misc\appendvfs.c \ $(TOP)\ext\misc\base64.c \ $(TOP)\ext\misc\base85.c \ $(TOP)\ext\misc\completion.c \ $(TOP)\ext\misc\decimal.c \ $(TOP)\ext\misc\fileio.c \ $(TOP)\ext\misc\ieee754.c \ $(TOP)\ext\misc\memtrace.c \ $(TOP)\ext\misc\pcachetrace.c \ $(TOP)\ext\misc\regexp.c \ $(TOP)\ext\misc\series.c \ $(TOP)\ext\misc\sha1.c \ $(TOP)\ext\misc\shathree.c \ $(TOP)\ext\misc\sqlar.c \ $(TOP)\ext\misc\sqlite3_stdio.c \ $(TOP)\ext\misc\sqlite3_stdio.h \ $(TOP)\ext\misc\uint.c \ $(TOP)\ext\misc\vfstrace.c \ $(TOP)\ext\misc\windirent.h \ $(TOP)\ext\misc\zipfile.c \ $(TOP)\ext\recover\dbdata.c \ $(TOP)\ext\recover\sqlite3recover.c \ $(TOP)\ext\recover\sqlite3recover.h # If use of zlib is enabled, add the "zipfile.c" source file. # !IF $(USE_ZLIB)!=0 SHELL_DEP = $(SHELL_DEP) $(TOP)\ext\misc\sqlar.c SHELL_DEP = $(SHELL_DEP) $(TOP)\ext\misc\zipfile.c !ENDIF shell.c: $(SHELL_DEP) $(TOP)\tool\mkshellc.tcl $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\tool\mkshellc.tcl shell.c zlib: pushd $(ZLIBDIR) && $(MAKE) /f win32\Makefile.msc clean $(ZLIBLIB) CFLAGS="$(ZLIBCFLAGS)" && popd # Rules to build the extension objects. # icu.lo: $(TOP)\ext\icu\icu.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\icu\icu.c fts3.lo: $(TOP)\ext\fts3\fts3.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3.c fts3_aux.lo: $(TOP)\ext\fts3\fts3_aux.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_aux.c fts3_expr.lo: $(TOP)\ext\fts3\fts3_expr.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_expr.c fts3_hash.lo: $(TOP)\ext\fts3\fts3_hash.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_hash.c fts3_icu.lo: $(TOP)\ext\fts3\fts3_icu.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_icu.c fts3_snippet.lo: $(TOP)\ext\fts3\fts3_snippet.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_snippet.c fts3_porter.lo: $(TOP)\ext\fts3\fts3_porter.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_porter.c fts3_tokenizer.lo: $(TOP)\ext\fts3\fts3_tokenizer.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c fts3_tokenizer1.lo: $(TOP)\ext\fts3\fts3_tokenizer1.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c fts3_tokenize_vtab.lo: $(TOP)\ext\fts3\fts3_tokenize_vtab.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c fts3_unicode.lo: $(TOP)\ext\fts3\fts3_unicode.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c fts3_unicode2.lo: $(TOP)\ext\fts3\fts3_unicode2.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c fts3_write.lo: $(TOP)\ext\fts3\fts3_write.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_write.c stmt.lo: $(TOP)\ext\misc\stmt.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\misc\stmt.c rtree.lo: $(TOP)\ext\rtree\rtree.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\rtree\rtree.c sqlite3session.lo: $(TOP)\ext\session\sqlite3session.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\session\sqlite3session.c # FTS5 things # FTS5_SRC = \ $(TOP)\ext\fts5\fts5.h \ $(TOP)\ext\fts5\fts5Int.h \ $(TOP)\ext\fts5\fts5_aux.c \ $(TOP)\ext\fts5\fts5_buffer.c \ $(TOP)\ext\fts5\fts5_main.c \ $(TOP)\ext\fts5\fts5_config.c \ $(TOP)\ext\fts5\fts5_expr.c \ $(TOP)\ext\fts5\fts5_hash.c \ $(TOP)\ext\fts5\fts5_index.c \ fts5parse.c fts5parse.h \ $(TOP)\ext\fts5\fts5_storage.c \ $(TOP)\ext\fts5\fts5_tokenize.c \ $(TOP)\ext\fts5\fts5_unicode2.c \ $(TOP)\ext\fts5\fts5_varint.c \ $(TOP)\ext\fts5\fts5_vocab.c fts5parse.c: $(TOP)\ext\fts5\fts5parse.y lemon.exe copy /Y $(TOP)\ext\fts5\fts5parse.y . copy /B fts5parse.y +,, del /Q fts5parse.h 2>NUL .\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) -S fts5parse.y fts5parse.h: fts5parse.c fts5.c: $(FTS5_SRC) $(JIM_TCLSH) $(JIM_TCLSH) $(TOP)\ext\fts5\tool\mkfts5c.tcl copy /Y $(TOP)\ext\fts5\fts5.h . copy /B fts5.h +,, fts5.lo: fts5.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c fts5.c fts5_ext.lo: fts5.c $(HDR) $(EXTHDR) $(LTCOMPILE) $(NO_WARN) -c fts5.c fts5.dll: fts5_ext.lo $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ fts5_ext.lo sqlite3rbu.lo: $(TOP)\ext\rbu\sqlite3rbu.c $(HDR) $(EXTHDR) $(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\rbu\sqlite3rbu.c # Rules to build the 'testfixture' application. # # If using the amalgamation, use sqlite3.c directly to build the test # fixture. Otherwise link against libsqlite3.lib. (This distinction is # necessary because the test fixture requires non-API symbols which are # hidden when the library is built via the amalgamation). # TESTFIXTURE_FLAGS = -DTCLSH_INIT_PROC=sqlite3TestInit -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CORE $(NO_WARN) TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERIES_CONSTRAINT_VERIFY=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_DEFAULT_PAGE_SIZE=1024 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_BYTECODE_VTAB=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_CARRAY=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_PERCENTILE=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CKSUMVFS_STATIC=1 TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) $(TEST_CCONV_OPTS) TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_STATIC_RANDOMJSON TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_STRICT_SUBTYPE=1 TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2) TESTFIXTURE_SRC1 = $(TESTEXT) $(SQLITE3C) !IF $(USE_AMALGAMATION)==0 TESTFIXTURE_SRC = $(TESTSRC) tclsqlite-ex.c $(TESTFIXTURE_SRC0) !ELSE TESTFIXTURE_SRC = $(TESTSRC) tclsqlite-ex.c $(TESTFIXTURE_SRC1) !ENDIF !IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 sqlite_tclDecls.h: echo #ifndef SQLITE_TCLAPI > $(SQLITETCLDECLSH) echo # define SQLITE_TCLAPI >> $(SQLITETCLDECLSH) echo #endif >> $(SQLITETCLDECLSH) type "$(TCLINCDIR)\tclDecls.h" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "^(EXTERN(?: CONST\d+?)?\s+?[^\(]*?\s+?)Tcl_" "\1 SQLITE_TCLAPI Tcl_" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "^(EXTERN\s+?(?:void|VOID)\s+?)TclFreeObj" "\1 SQLITE_TCLAPI TclFreeObj" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*tcl_" "(SQLITE_TCLAPI *tcl_" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*tclFreeObj" "(SQLITE_TCLAPI *tclFreeObj" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*" "(SQLITE_TCLAPI *" >> $(SQLITETCLDECLSH) sqlite_tcl.h: type "$(TCLINCDIR)\tcl.h" | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact tclDecls.h sqlite_tclDecls.h \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "typedef (.*?)\(Tcl_" "typedef \1 (SQLITE_TCLAPI Tcl_" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "void (*freeProc)" "void (SQLITE_TCLAPI *freeProc)" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "Tcl_HashEntry *(*findProc)" "Tcl_HashEntry *(SQLITE_TCLAPI *findProc)" \ | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "Tcl_HashEntry *(*createProc)" "Tcl_HashEntry *(SQLITE_TCLAPI *createProc)" >> $(SQLITETCLH) !ENDIF testfixture.exe: $(TESTFIXTURE_SRC) $(TESTFIXTURE_DEP) $(SQLITE3H) $(LIBRESOBJS) $(HDR) $(SQLITE_TCL_DEP) $(LTLINK) -DSQLITE_NO_SYNC=1 $(TESTFIXTURE_FLAGS) \ -DBUILD_sqlite -I$(TCLINCDIR) -I$(TOP)\ext\misc \ $(TESTFIXTURE_SRC) \ /link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS) # A small helper for manually running individual tests tf.bat: testfixture.exe Makefile.msc echo @set PATH=$(LIBTCLPATH);%PATH% > $@ echo .\testfixture.exe %* >> $@ extensiontest: testfixture.exe testloadext.dll @set PATH=$(LIBTCLPATH);$(PATH) .\testfixture.exe $(TOP)\test\loadext.test $(TESTOPTS) tool-zip: testfixture.exe sqlite3.exe sqldiff.exe sqlite3_analyzer.exe sqlite3_rsync.exe sqlite3.dll $(TOP)\tool\mktoolzip.tcl .\testfixture.exe $(TOP)\tool\mktoolzip.tcl snapshot-zip: testfixture.exe sqlite3.exe sqldiff.exe sqlite3_analyzer.exe sqlite3_rsync.exe sqlite3.dll $(TOP)\tool\mktoolzip.tcl .\testfixture.exe $(TOP)\tool\mktoolzip.tcl --snapshot coretestprogs: testfixture.exe sqlite3.exe testprogs: $(TESTPROGS) srcck1.exe fuzzcheck.exe sessionfuzz.exe fuzztest: fuzzcheck.exe .\fuzzcheck.exe $(FUZZDATA) # # Legacy testing targets, no longer used by the developers and # now aliased to one of the commonly used testing targets. # quicktest: devtest test: devtest fulltest: releasetest alltest: releasetest soaktest: releasetest fulltestonly: releasetest # The veryquick.test TCL tests. # tcltest: testfixture.exe @set PATH=$(LIBTCLPATH);$(PATH) .\testfixture.exe $(TOP)\test\veryquick.test $(TESTOPTS) # Runs all the same tests cases as the "tcltest" target but uses # the testrunner.tcl script to run them in multiple cores # concurrently. testrunner: testfixture.exe .\testfixture.exe $(TOP)\test\testrunner.tcl # This is the testing target preferred by the core SQLite developers. # It runs tests under a standard configuration. The devs run # "nmake /f Makefile.msc devtest" prior to each check-in, at a minimum. # Probably other tests too, but at least this one. # devtest: srctree-check sourcetest $(TCLSH_CMD) $(TOP)\test\testrunner.tcl mdevtest mdevtest: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl mdevtest # Rerun test cases that failed on the previous testrunner invocation # retest: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl retest # Show all errors from the most reason testrunner invocation # errors: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl errors # Show the status of the current testrunner invocation, # updated every couple of seconds # status: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl status -d 2 # Validate that various generated files in the source tree # are up-to-date. # srctree-check: $(TOP)\tool\srctree-check.tcl $(TCLSH_CMD) $(TOP)\tool\srctree-check.tcl # Testing for a release # releasetest: verify-source $(TCLSH_CMD) $(TOP)\test\testrunner.tcl release # xdevtest is like releasetest, except that it skips the # dependency on verify-source so that xdevtest can be run from # a modified source tree. # xdevtest: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl release smoketest: $(TESTPROGS) @set PATH=$(LIBTCLPATH);$(PATH) .\testfixture.exe $(TOP)\test\main.test $(TESTOPTS) # Measure the performance of floating-point conversions. # fp-speed-test: fp-speed-1.exe fp-speed-2.exe fp-speed-1 1000000 fp-speed-2 1000000 shelltest: $(TCLSH_CMD) $(TOP)\test\testrunner.tcl release shell sqlite3_analyzer.c: $(SQLITE3C) $(SQLITE3H) tclsqlite-ex.c $(TOP)\tool\spaceanal.tcl $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqlite3_analyzer.c.in $(TOP)\ext\misc\sqlite3_stdio.h $(TOP)\ext\misc\sqlite3_stdio.c $(SQLITE_TCL_DEP) $(TCLSH_CMD) $(TOP)\tool\mkccode.tcl -DINCLUDE_SQLITE3_C $(TOP)\tool\sqlite3_analyzer.c.in > $@ sqlite3_analyzer.exe: sqlite3_analyzer.c $(LIBRESOBJS) $(LTLINK) $(NO_WARN) -DBUILD_sqlite -I$(TCLINCDIR) sqlite3_analyzer.c \ /link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS) sqltclsh.c: sqlite3.c tclsqlite-ex.c $(TOP)\tool\sqltclsh.tcl $(TOP)\ext\misc\appendvfs.c $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqltclsh.c.in $(TCLSH_CMD) $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqltclsh.c.in >sqltclsh.c sqltclsh.exe: sqltclsh.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(LTLINK) $(NO_WARN) -DBUILD_sqlite -I$(TCLINCDIR) sqltclsh.c \ /link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS) sqlite3_expert.exe: $(SQLITE3C) $(TOP)\ext\expert\sqlite3expert.h $(TOP)\ext\expert\sqlite3expert.c $(TOP)\ext\expert\expert.c $(LTLINK) $(NO_WARN) $(TOP)\ext\expert\sqlite3expert.c $(TOP)\ext\expert\expert.c $(SQLITE3C) $(TLIBS) dbdump.exe: $(TOP)\ext\misc\dbdump.c $(SQLITE3C) $(SQLITE3H) $(LIBRESOBJS) $(LTLINK) $(NO_WARN) -DDBDUMP_STANDALONE $(TOP)\ext\misc\dbdump.c $(SQLITE3C) \ /link $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS) testloadext.lo: $(TOP)\src\test_loadext.c $(SQLITE3H) $(LTCOMPILE) $(NO_WARN) -c $(TOP)\src\test_loadext.c testloadext.dll: testloadext.lo $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ testloadext.lo dbtotxt.exe: $(TOP)\tool\dbtotxt.c $(LTLINK) $(NO_WARN) $(TOP)\tool\dbtotxt.c /link $(LDFLAGS) $(LTLINKOPTS) showdb.exe: $(TOP)\tool\showdb.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\showdb.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) showstat4.exe: $(TOP)\tool\showstat4.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\showstat4.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) showjournal.exe: $(TOP)\tool\showjournal.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\showjournal.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) showwal.exe: $(TOP)\tool\showwal.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\showwal.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) showshm.exe: $(TOP)\tool\showshm.c $(LTLINK) $(NO_WARN) $(TOP)\tool\showshm.c /link $(LDFLAGS) $(LTLINKOPTS) showtmlog.exe: $(TOP)\tool\showtmlog.c $(LTLINK) $(NO_WARN) $(TOP)\tool\showtmlog.c /link $(LDFLAGS) $(LTLINKOPTS) index_usage.exe: $(TOP)\tool\index_usage.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\index_usage.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) changeset.exe: $(TOP)\ext\session\changeset.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_ENABLE_SESSION=1 -DSQLITE_ENABLE_PREUPDATE_HOOK=1 \ $(TOP)\ext\session\changeset.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) changesetfuzz.exe: $(TOP)\ext\session\changesetfuzz.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_ENABLE_SESSION=1 -DSQLITE_ENABLE_PREUPDATE_HOOK=1 \ $(TOP)\ext\session\changesetfuzz.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) fts3view.exe: $(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) rollback-test.exe: $(TOP)\tool\rollback-test.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\tool\rollback-test.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) atrc.exe: $(TOP)\test\atrc.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\test\atrc.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) LogEst.exe: $(TOP)\tool\logest.c $(SQLITE3H) $(LTLINK) $(NO_WARN) $(TOP)\tool\LogEst.c /link $(LDFLAGS) $(LTLINKOPTS) wordcount.exe: $(TOP)\test\wordcount.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\test\wordcount.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) speedtest1.exe: $(TOP)\test\speedtest1.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(ST_COMPILE_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\test\speedtest1.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) fp-speed-1.exe: $(TOP)\test\fp-speed-1.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(ST_COMPILE_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\test\fp-speed-1.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) fp-speed-2.exe: $(TOP)\test\fp-speed-2.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(ST_COMPILE_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION \ $(TOP)\test\fp-speed-2.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) kvtest.exe: $(TOP)\test\kvtest.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(KV_COMPILE_OPTS) \ $(TOP)\test\kvtest.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) rbu.exe: $(TOP)\ext\rbu\rbu.c $(TOP)\ext\rbu\sqlite3rbu.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) -DSQLITE_ENABLE_RBU \ $(TOP)\ext\rbu\rbu.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) THREADTEST3_SRC = \ $(TOP)\test\threadtest3.c \ $(TOP)\test\tt3_checkpoint.c \ $(TOP)\test\tt3_index.c \ $(TOP)\test\tt3_vacuum.c \ $(TOP)\test\tt3_stress.c \ $(TOP)\test\tt3_lookaside1.c threadtest3.exe: $(THREADTEST3_SRC) $(TOP)\src\test_multiplex.c $(SQLITE3C) $(SQLITE3H) $(LTLINK) $(NO_WARN) $(TOP)\test\threadtest3.c $(TOP)\src\test_multiplex.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) # Display key variables that control which version of TCL is to be used. # tcl-env: @echo TCLDIR = $(TCLDIR) @echo TCLVERSION = $(TCLVERSION) @echo TCLSUFFIX = $(TCLSUFFIX) @echo LIBTCL = $(LIBTCL) @echo LIBTCLSTUB = $(LIBTCLSTUB) @echo TCLSH_CMD = $(TCLSH_CMD) @echo JIM_TCLSH = $(JIM_TCLSH) @echo VISUALSTUDIOVERSION = $(VISUALSTUDIOVERSION) env: @echo ALL_TCL_TARGETS = $(ALL_TCL_TARGETS) @echo API_ARMOR = $(API_ARMOR) @echo ASAN = $(ASAN) @echo BCC = $(BCC) @echo BUILD_ZLIB = $(BUILD_ZLIB) @echo CC = $(CC) @echo CCOPTS = $(CCOPTS) @echo CHECKER_DEPS = $(CHECKER_DEPS) @echo CORE_CCONV_OPTS = $(CORE_CCONV_OPTS) @echo CORE_COMPILE_OPTS = $(CORE_COMPILE_OPTS) @echo CORE_LINK_DEP = $(CORE_LINK_DEP) @echo CORE_LINK_OPTS = $(CORE_LINK_OPTS) @echo CRTLIBPATH = $(CRTLIBPATH) @echo CSC = $(CSC) @echo DBFUZZ_COMPILE_OPTS = $(DBFUZZ_COMPILE_OPTS) @echo DEBUG = $(DEBUG) @echo DYNAMIC_SHELL = $(DYNAMIC_SHELL) @echo EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) @echo EXTHDR = $(EXTHDR) @echo EXTRA_SRC = $(EXTRA_SRC) @echo FOR_UWP = $(FOR_UWP) @echo FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) @echo FUZZCHECK_SRC = $(FUZZCHECK_SRC) @echo FUZZDATA = $(FUZZDATA) @echo FUZZERSHELL_COMPILE_OPTS = $(FUZZERSHELL_COMPILE_OPTS) @echo HDR = $(HDR) @echo ICUDIR = $(ICUDIR) @echo ICUINCDIR = $(ICUINCDIR) @echo ICULIBDIR = $(ICULIBDIR) @echo JIM_TCLSH = $(JIM_TCLSH) @echo KV_COMPILE_OPTS = $(KV_COMPILE_OPTS) @echo LDFLAGS = $(LDFLAGS) @echo LD = $(LD) @echo LIBICU = $(LIBICU) @echo LIBOBJ = $(LIBOBJ) @echo LIBREADLINE = $(LIBREADLINE) @echo LIBRESOBJS = $(LIBRESOBJS) @echo LIBTCLPATH = $(LIBTCLPATH) @echo LIBTCLSTUB = $(LIBTCLSTUB) @echo LIBTCL = $(LIBTCL) @echo LTCOMPILE = $(LTCOMPILE) @echo LTLIB = $(LTLIB) @echo LTLIBOPTS = $(LTLIBOPTS) @echo LTLIBPATHS = $(LTLIBPATHS) @echo LTLIBS = $(LTLIBS) @echo LTLINK = $(LTLINK) @echo LTLINKOPTS = $(LTLINKOPTS) @echo LTRCOMPILE = $(LTRCOMPILE) @echo MEMDEBUG = $(MEMDEBUG) @echo MINIMAL_AMALGAMATION = $(MINIMAL_AMALGAMATION) @echo MPTESTER_COMPILE_OPTS = $(MPTESTER_COMPILE_OPTS) @echo NCC = $(NCC) @echo NCRTLIBPATH = $(NCRTLIBPATH) @echo NLTLIBPATHS = $(NLTLIBPATHS) @echo NO_LINEMACROS = $(NO_LINEMACROS) @echo NO_TCL = $(NO_TCL) @echo NO_WARN = $(NO_WARN) @echo NSDKLIBPATH = $(NSDKLIBPATH) @echo NUCRTLIBPATH = $(NUCRTLIBPATH) @echo OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) @echo OPTIMIZATIONS = $(OPTIMIZATIONS) @echo OSSSHELL_SRC = $(OSSSHELL_SRC) @echo OSTRACE = $(OSTRACE) @echo RBU = $(RBU) @echo RCC = $(RCC) @echo RC = $(RC) @echo READLINE_FLAGS = $(READLINE_FLAGS) @echo REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) @echo RSYNC_OPT = $(RSYNC_OPT) @echo RSYNC_SRC = $(RSYNC_SRC) @echo SESSION = $(SESSION) @echo SETLK_TIMEOUT = $(SETLK_TIMEOUT) @echo SHELL_CCONV_OPTS = $(SHELL_CCONV_OPTS) @echo SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) @echo SHELL_CORE_DEP = $(SHELL_CORE_DEP) @echo SHELL_CORE_LIB = $(SHELL_CORE_LIB) @echo SHELL_CORE_SRC = $(SHELL_CORE_SRC) @echo SHELL_DEP = $(SHELL_DEP) @echo SHELL_LINK_OPTS = $(SHELL_LINK_OPTS) @echo SPLIT_AMALGAMATION = $(SPLIT_AMALGAMATION) @echo SQLITETCLDECLSH = $(SQLITETCLDECLSH) @echo SQLITE_TCL_DEP = $(SQLITE_TCL_DEP) @echo SQLITETCLH = $(SQLITETCLH) @echo SRC = $(SRC) @echo STATICALLY_LINK_TCL = $(STATICALLY_LINK_TCL) @echo ST_COMPILE_OPTS = $(ST_COMPILE_OPTS) @echo STORELIBPATH = $(STORELIBPATH) @echo SYMBOLS = $(SYMBOLS) @echo TCC = $(TCC) @echo TCLDIR = $(TCLDIR) @echo TCLINCDIR = $(TCLINCDIR) @echo TCLLIBDIR = $(TCLLIBDIR) @echo TCLLIBPATHS = $(TCLLIBPATHS) @echo TCLLIBS = $(TCLLIBS) @echo TCLSH_CMD = $(TCLSH_CMD) @echo TCLSQLITEEX = $(TCLSQLITEEX) @echo TCLSUFFIX = $(TCLSUFFIX) @echo TCLVERSION = $(TCLVERSION) @echo TEST_CCONV_OPTS = $(TEST_CCONV_OPTS) @echo TESTEXT = $(TESTEXT) @echo TESTFIXTURE_DEP = $(TESTFIXTURE_DEP) @echo TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) @echo TESTFIXTURE_SRC = $(TESTFIXTURE_SRC) @echo TESTOPTS = $(TESTOPTS) @echo TESTPROGS = $(TESTPROGS) @echo TESTSRC = $(TESTSRC) @echo TLIBS = $(TLIBS) @echo TOP = $(TOP) @echo UCRTLIBPATH = $(UCRTLIBPATH) @echo USE_AMALGAMATION = $(USE_AMALGAMATION) @echo USE_CRT_DLL = $(USE_CRT_DLL) @echo USE_FATAL_WARN = $(USE_FATAL_WARN) @echo USE_FULLWARN = $(USE_FULLWARN) @echo USE_ICU = $(USE_ICU) @echo USE_LISTINGS = $(USE_LISTINGS) @echo USE_NATIVE_LIBPATHS = $(USE_NATIVE_LIBPATHS) @echo USE_RC = $(USE_RC) @echo USE_RUNTIME_CHECKS = $(USE_RUNTIME_CHECKS) @echo USE_SEH = $(USE_SEH) @echo USE_STDCALL = $(USE_STDCALL) @echo USE_ZLIB = $(USE_ZLIB) @echo XCOMPILE = $(XCOMPILE) @echo ZLIBCFLAGS = $(ZLIBCFLAGS) @echo ZLIBDIR = $(ZLIBDIR) @echo ZLIBINCDIR = $(ZLIBINCDIR) @echo ZLIBLIBDIR = $(ZLIBLIBDIR) @echo ZLIBLIB = $(ZLIBLIB) moreclean: clean del /Q $(SQLITE3C) $(SQLITE3H) 2>NUL # <</mark>> clean: del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL del /Q *.bsc *.cod *.da *.bb *.bbg *.vc gmon.out 2>NUL del /Q sqlite3.def tclsqlite3.def ctime.c pragma.h 2>NUL del /Q $(SQLITE3EXE) $(SQLITE3DLL) Replace.exe 2>NUL # <<mark>> del /Q $(SQLITE3TCLDLL) pkgIndex.tcl 2>NUL del /Q opcodes.c opcodes.h 2>NUL del /Q lemon.* lempar.c parse.* 2>NUL del /Q mksourceid.* mkkeywordhash.* keywordhash.h 2>NUL del /Q notasharedlib.* 2>NUL -rmdir /Q/S .deps 2>NUL -rmdir /Q/S .libs 2>NUL -rmdir /Q/S tsrc 2>NUL del /Q .target_source 2>NUL del /Q tclsqlite3.exe $(SQLITETCLH) $(SQLITETCLDECLSH) 2>NUL del /Q lsm.dll lsmtest.exe 2>NUL del /Q atrc.exe changesetfuzz.exe dbtotxt.exe index_usage.exe 2>NUL del /Q testloadext.dll 2>NUL del /Q testfixture.exe test.db tf.bat 2>NUL del /Q /S testdir 2>/NUL -rmdir /Q /S testdir 2>NUL del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe dbdump.exe 2>NUL del /Q changeset.exe 2>NUL del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe 2>NUL del /Q fp-speed-1.exe fp-speed-2.exe 2>NUL del /Q mptester.exe wordcount.exe rbu.exe srcck1.exe 2>NUL del /Q sqlite3.c sqlite3-*.c sqlite3.h 2>NUL del /Q sqlite3rc.h 2>NUL del /Q shell.c sqlite3ext.h sqlite3session.h 2>NUL del /Q sqlite3_analyzer.exe sqlite3_analyzer.c sqlite3_rsync.exe 2>NUL del /Q sqlite-*-output.vsix 2>NUL del /Q fuzzershell.exe fuzzcheck.exe sqldiff.exe dbhash.exe 2>NUL del /Q sqltclsh.* 2>NUL del /Q dbfuzz.exe sessionfuzz.exe threadtest3.exe 2>NUL del /Q kvtest.exe ossshell.exe scrub.exe 2>NUL del /Q showshm.exe sqlite3_checker.* sqlite3_expert.exe 2>NUL del /Q fts5.* fts5parse.* 2>NUL del /q src-verify.exe 2>NUL del /q jimsh.exe jimsh0.exe 2>NUL # <</mark>>