/
niceSOFT
/
sqlite
Обзор
Документация
Войти
/
niceSOFT
/
sqlite
Код
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
relase
main.mk
2 359 строк
76 KB
drh
Enhance the makefile to make it easier to build from a read-only source tree.
07 янв 2025, 02:33
07 янв 2025, 02:33
fbbe262
Код
Авторство
О чём код?
#!/do/not/make # ^^^^ help out editors which guess this file's type. ############################################################################### # This is the main makefile for sqlite. It expects to be included from # a higher-level makefile which configures any dynamic state needed by # this one (as documented below). # # Maintenance reminders: # # - This file must remain devoid of GNU Make-isms. i.e. it must be # POSIX Make compatible. "bmake" (BSD make) is available on most # Linux systems, so compatibility is relatively easy to test. As a # harmless exception, this file sometimes uses $(MAKEFILE_LIST) as a # dependency. That var, in GNU Make, lists all of the makefile # currently loaded. # # The variables listed below must be defined before this script is # invoked. This file will use defaults, very possibly invalid, for any # which are not defined. ######################################################################## all: # # $(TOP) = # # The toplevel directory of the source tree. For canonical builds # this is the directory that contains this "Makefile.in" and the # "configure.in" script. For out-of-tree builds, this will differ # from $(PWD). # TOP ?= $(PWD) # # $(PACKAGE_VERSION) = # # The MAJOR.MINOR.PATCH version number of this build. # PACKAGE_VERSION ?= # # $(B.cc) = # # C Compiler and options for use in building executables that will run # on the platform that is doing the build. # B.cc ?= $(CC) # # $(T.cc) = # # C Compiler and options for use in building executables that will run # on the target platform. This is usually the same as B.cc, unless you # are cross-compiling. Note that it should only contain flags which # are used by _all_ build targets. Flags needed only by specific # targets are defined elsewhere and applied on a per-target basis. # T.cc ?= $(B.cc) # # $(AR) = # # Tool used to build a static library from object files, without its # arguments. $(AR.flags) are its flags for creating a lib. # AR ?= ar AR.flags ?= cr # # $(B.exe) = # # File extension for executables on the build platform. ".exe" for # Windows and "" everywhere else. # B.exe ?= # # $(B.dll) and $(B.lib) = # # The DLL resp. static library counterparts of $(B.exe). # B.dll ?= .so B.lib ?= .a # # $(T.exe) = # # File extension for executables on the target platform. ".exe" for # Windows and "" everywhere else. # T.exe ?= $(B.exe) # # $(T.dll) and $(T.lib) = # # The DLL resp. static library counterparts of $(T.exe). # T.dll ?= $(B.dll) T.lib ?= $(B.lib) # # $(TCLSH_CMD) = # # The canonical tclsh. # TCLSH_CMD ?= tclsh # # JimTCL is part of the autosetup suite and is suitable for all # current in-tree code-generation TCL jobs, but it requires that we # build it with non-default flags. Note that the build tree will, if # no system-level tclsh is found, also have a ./jimsh0 binary. That # one is a bare-bones build for the configure process, whereas we need # to build it with another option enabled for use with the various # code generators. # # JIMSH requires a leading path component, even if it's ./, so that it # can be used as a shell command. # # On Windows platforms, if -DHAVE_REALPATH does not work then try # -DHAVE__FULLPATH (note the double-underscore). # CFLAGS.jimsh ?= -DHAVE_REALPATH JIMSH ?= ./jimsh$(T.exe) # # $(B.tclsh) = # # The TCL interpreter for in-tree code generation. May be either the # in-tree JimTCL ($(JIMSH)) or the canonical TCL ($(TCLSH_CMD). If # it's JimTCL, it must be compiled with -DHAVE_REALPATH or # -DHAVE__FULLPATH. # B.tclsh ?= $(JIMSH) # # Autotools-conventional vars which are (in this tree) used only by # package installation rules and for generating sqlite3.pc (pkg-config # data file). # # The following ${XYZdir} vars are provided for the sake of clients # who expect to be able to override these using autotools-conventional # dir name vars. # prefix ?= /usr/local datadir ?= $(prefix)/share mandir ?= $(datadir)/man includedir ?= $(prefix)/include exec_prefix ?= $(prefix) bindir ?= $(exec_prefix)/bin libdir ?= $(exec_prefix)/lib # This makefile does not use any of: # sbindir ?= $(exec_prefix)/sbin # sysconfdir ?= /etc # sharedstatedir ?= $(prefix)/com # localstatedir ?= /var # runstatedir ?= /run # infodir ?= $(datadir)/info # libexecdir ?= $(exec_prefix)/libexec ### end of autotools-compatible install dir vars # # $(LDFLAGS.{feature}) and $(CFLAGS.{feature}) = # # Linker resp. C/CPP flags required by a specific feature, e.g. # $(LDFLAGS.pthread) or $(CFLAGS.readline). # # Rather that stuffing all CFLAGS and LDFLAGS into a single set, we # break them down on a per-feature basis and expect the build targets # to use the one(s) it needs. # LDFLAGS.zlib ?= -lz LDFLAGS.math ?= -lm LDFLAGS.rpath ?= -Wl,-rpath -Wl,$(prefix)/lib LDFLAGS.pthread ?= -lpthread LDFLAGS.dlopen ?= -ldl LDFLAGS.shlib ?= -shared LDFLAGS.icu ?= # -licui18n -licuuc -licudata CFLAGS.icu ?= LDFLAGS.libsqlite3.soname ?= # see https://sqlite.org/src/forumpost/5a3b44f510df8ded # libreadline (or a workalike): # To activate readline in the shell: SHELL_OPT = -DHAVE_READLINE=1 LDFLAGS.readline ?= -lreadline # these vary across platforms CFLAGS.readline ?= -I$(prefix)/include # ^^^ When using linenoise instead of readline, do something like: # SHELL_OPT += -DHAVE_LINENOISE=1 # CFLAGS.readline = -I$(HOME)/linenoise $(HOME)/linenoise/linenoise.c # LDFLAGS.readline = # empty # # # $(INSTALL) = # # Tool for installing files and directories. It must be compatible # with conventional Unix /usr/bin/install. Note that libtool's # install-sh is _not_ compatible with this because it _moves_ targets # during installation, which may break the build of targets which are # built after others are installed. # INSTALL ?= install # # $(ENABLE_SHARED) = # # 1 if libsqlite3.$(T.dll) should be built. # ENABLE_SHARED ?= 1 # # $(ENABLE_STATIC) = # # 1 if libsqlite3.$(T.lib) should be built. Some components, # e.g. libtclsqlite3 and some test apps, implicitly require the static # library and will ignore this preference. # ENABLE_STATIC ?= 1 # # $(USE_AMALGAMATION) # # 1 if the amalgamation (sqlite3.c/h) should be built/used, otherwise # the library is built from all of its original source files. # Certaint tools, like sqlite3$(T.exe), require the amalgamation and # will ignore this preference. # USE_AMALGAMATION ?= 1 # # $(LINK_TOOLS_DYNAMICALLY) # # If 1, certain binaries which typically statically link against # libsqlite3 or its component object files will instead link against # the DLL. The caveat is that running such builds from the source tree # may require that the user specifically prepend "." to their # $LD_LIBRARY_PATH so that the dynamic linker does not pick up a # libsqlite3.so from outside the source tree. Alternately, symlinking # the in-build-tree $(libsqlite3.SO) to some dir in the system's # library path will work for giving the apps access to the in-tree # DLL. # LINK_TOOLS_DYNAMICALLY ?= 0 # # $(AMALGAMATION_GEN_FLAGS) = # # Optional flags for the amalgamation generator. # AMALGAMATION_GEN_FLAGS ?= --linemacros=0 # # $(OPT_FEATURE_FLAGS) = # # Preprocessor flags for enabling and disabling specific libsqlite3 # features (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). The same set of OMIT # and ENABLE flags must be passed to the LEMON parser generator and # the mkkeywordhash tool as well. This is normally set by the # configure process, and passing a custom value to a # coonfigure-filtered Makefile may not work. # # When using the canonical makefile, add $(OPTIONS)=... on the make # command line to append additional options to the # $(OPT_FEATURE_FLAGS). Note that some flags, because they influence # generation of the SQL parser, only work if the build is specifically # configured to account for them. Adding them later, when compiling # the amalgamation separately, may or may not work. # # $(OPTS)=... is another way of influencing C compilation. It is # distinctly separate from $(OPTIONS) and $(OPT_FEATURE_FLAGS) but, # like those, $(OPTS) applies to all invocations of $(T.cc). The # configure process does not set either of $(OPTIONS) or $(OPTS). # OPT_FEATURE_FLAGS ?= # # $(SHELL_OPT) = # # CFLAGS specific to the sqlite3 CLI shell app and its close cousins. # SHELL_OPT ?= # # TCL_CONFIG_SH must, for some of the build targets, refer to a valid # tclConfig.sh. That script will be used to populate most of the other # TCL-related vars the build needs. The core library does not require # TCL, but TCL is needed for running tests and certain tools, e.g. # sqlite3_analyzer. # TCL_CONFIG_SH ?= # # $(HAVE_WASI_SDK) = # # Set to 1 when building with the WASI SDK. This disables certain # build targets. It is expected that the invoker sets $(CC), $(LD), # and $(AR) to their counterparts from the wasi-sdk. # HAVE_WASI_SDK ?= 0 # # ... and many, many more. Sane defaults are selected where possible. # # With the above-described defined, the rest of this make script will # build the project's deliverables and testing tools. ################################################################################ all: sqlite3.h sqlite3.c ######################################################################## ######################################################################## # Modifying anything after this point should not be necessary for most # builds. ######################################################################## ######################################################################## # # $(CFLAGS.env) holds the any $(CFLAGS) provided at configure- or # make-time (the latter overriding the former). # # $(CFLAGS) should ideally only contain flags which are relevant for # all binaries built for the target platform. However, many people # like to pass it to "make" without realizing that it applies to # dozens of deliverables, and they override core flags (like -fPIC) # when doing so. To help work around that, we expect all core-most # CFLAGS, e.g. -fPIC, to be set in $(CFLAGS.core). That enables people # to pass their other CFLAGS without triggering, e.g., "recompile with # -fPIC" errors. # # Historical note: the pre-3.48 build does not honor CPPFLAGS passed # to make, so we do not do so here. Both the legacy and 3.48+ builds # support CPPFLAGS passed at configure-time, and combines them with # the configure-time CFLAGS. # CFLAGS.core ?= CFLAGS.env = $(CFLAGS) T.cc += $(CFLAGS.core) $(CFLAGS.env) # # $(LDFLAGS.configure) represents any LDFLAGS=... the client passes to # the configure process. The historical build enabled passing-on of # user-provided LDFLAGS at configure-time but not make-time. That # behavior is not possible to fully emulate here because this makefile # is not filtered by the configure script, so we instead # "soft-enforce" it by using a level of indirection, which clients who # read this can (but are not advised to!) bypass by passing # LDFLAGS.configure=... to this makefile. (We do not guaranty this # variable name to be stable, so do not rely on that capability!) # # A significant difference from the legacy build: # # The legacy build applied such LDFLAGS to all link operations for all # deliverables. The 3.48+ build applies them (as of this writing) more # selectively: search this file LDFLAGS.configure to see where they're # set. # LDFLAGS.configure ?= # # The difference between $(OPT_FEATURE_FLAGS) and $(OPTS) is that the # former is historically provided by the configure script, whereas # $(OPTS) is intended to be provided as arguments to the make # invocation. # T.cc += $(OPT_FEATURE_FLAGS) # # Add in any optional global compilation flags on the make command # line i.e. make "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1". # T.cc += $(OPTS) # # $(INSTALL) invocation for use with non-executable files. # INSTALL.noexec = $(INSTALL) -m 0644 # ^^^ do not use GNU-specific flags to $(INSTALL), e.g. --mode=... # # $(T.compile) = generic target platform compiler invocation, # differing only from $(T.cc) in that it appends $(T.compile.extras), # which are primarily intended for use with gcov-related flags. # T.compile = $(T.cc) $(T.compile.extras) # # $(T.cc.sqlite) is $(T.cc) plus any flags which are desired for the # library as a whole, but not necessarily needed for every binary. It # will normally get initially populated with flags by the # configure-generated makefile. # T.cc.sqlite ?= $(T.cc) # # $(CFLAGS.intree_includes) = -I... flags relevant specifically to # this tree, including any subdirectories commonly needed for building # various tools. # CFLAGS.intree_includes = \ -I. -I$(TOP)/src -I$(TOP)/ext/rtree -I$(TOP)/ext/icu \ -I$(TOP)/ext/fts3 -I$(TOP)/ext/session \ -I$(TOP)/ext/misc T.cc.sqlite += $(CFLAGS.intree_includes) # # $(T.cc.extension) = compiler invocation for loadable extensions. # T.cc.extension = $(T.compile) -I. -I$(TOP)/src -DSQLITE_CORE # # $(T.link) = compiler invocation for when the target will be an # executable. # # $(T.link.extras) = optional config-specific flags for $(T.link), # primarily intended for use with gcov-related flags. # T.link = $(T.cc.sqlite) $(T.link.extras) # # $(T.link.shared) = $(T.link) invocation specifically for shared libraries # T.link.shared = $(T.link) $(LDFLAGS.shlib) # # $(LDFLAGS.libsqlite3) should be used with any deliverable for which # any of the following apply: # # - Results in building libsqlite3.so # - Compiles sqlite3.c in to an application # - Links with libsqlite3.a # - Links in either of $(LIBOBJSO) or $(LIBOBJS1) # # Note that these flags are for the target build platform, not # necessarily localhost. i.e. it should be used with $(T.cc.sqlite) # or $(T.link) but not $(B.cc). # LDFLAGS.libsqlite3 = \ $(LDFLAGS.rpath) $(LDFLAGS.pthread) \ $(LDFLAGS.math) $(LDFLAGS.dlopen) \ $(LDFLAGS.zlib) $(LDFLAGS.icu) \ $(LDFLAGS.configure) # # $(install-dir.XYZ) = dirs for installation. # # Design note: these should arguably all be defined with surrounding # double-quotes so that targets which have spaces in their paths will # work, but that leads to Make treating the quotes as part of the dir # name, which in turn leads to it never finding a matching name in the # filesystem and always invoking ($(INSTALL) -d ...) for them. The # moral of this story is that spaces in installation paths will break # the install process. # install-dir.bin = $(DESTDIR)$(bindir) install-dir.lib = $(DESTDIR)$(libdir) install-dir.include = $(DESTDIR)$(includedir) install-dir.pkgconfig = $(DESTDIR)$(libdir)/pkgconfig install-dir.man1 = $(DESTDIR)$(mandir)/man1 install-dir.all = $(install-dir.bin) $(install-dir.include) \ $(install-dir.lib) $(install-dir.man1) \ $(install-dir.pkgconfig) $(install-dir.all): $(INSTALL) -d "$@" # # After jimsh is compiled, we run some sanity checks to ensure that # it was built in a way compatible with this project's scripts: # # 1) Ensure that it was built with realpath() or _fullpath() support. # Without that flag the [file normalize] command will always resolve # to an empty string. # # 2) Ensure that it is built with -DJIM_COMPAT (which may be # hard-coded into jimsh0.c). Without this, the [expr] command # accepts only a single argument. # $(JIMSH): $(TOP)/autosetup/jimsh0.c $(B.cc) -o $@ $(CFLAGS.jimsh) $(TOP)/autosetup/jimsh0.c @if [ x = "x$$($(JIMSH) -e 'file normalize $(JIMSH)' 2>/dev/null)" ]; then \ echo "$(JIMSH) was built without -DHAVE_REALPATH or -DHAVE__FULLPATH." 1>&2; \ exit 1; \ fi @if [ x3 != "x$$($(JIMSH) -e 'expr 1 + 2' 2>/dev/null)" ]; then \ echo "$(JIMSH) was built without -DJIM_COMPAT." 1>&2; \ exit 1; \ fi distclean-jimsh: rm -f $(JIMSH) distclean: distclean-jimsh # # $(MAKE_SANITY_CHECK) = a set of checks for various make vars which # must be provided to this file before including it. If any are # missing, this target fails. It does (almost) no semantic validation, # only checks to see that appropriate vars are not empty. # # Note that $(MAKEFILE_LIST) is a GNU-make-ism but its use is harmless # in other flavors of Make. # MAKE_SANITY_CHECK = .main.mk.checks $(MAKE_SANITY_CHECK): $(MAKEFILE_LIST) $(TOP)/auto.def @if [ x = "x$(TOP)" ]; then echo "Missing TOP var" 1>&2; exit 1; fi @if [ ! -d "$(TOP)" ]; then echo "$(TOP) is not a directory" 1>&2; exit 1; fi @if [ ! -f "$(TOP)/auto.def" ]; then echo "$(TOP) does not appear to be the top-most source dir" 1>&2; exit 1; fi @if [ x = "x$(PACKAGE_VERSION)" ]; then echo "PACKAGE_VERSION must be set to the library's X.Y.Z-format version number" 1>&2; exit 1; fi @if [ x = "x$(B.cc)" ]; then echo "Missing B.cc var" 1>&2; exit 1; fi @if [ x = "x$(T.cc)" ]; then echo "Missing T.cc var" 1>&2; exit 1; fi @if [ x = "x$(B.tclsh)" ]; then echo "Missing B.tclsh var" 1>&2; exit 1; fi @if [ x = "x$(AR)" ]; then echo "Missing AR var" 1>&2; exit 1; fi touch $@ clean-sanity-check: rm -f $(MAKE_SANITY_CHECK) clean: clean-sanity-check # # Object files for the SQLite library (non-amalgamation). # LIBOBJS0 = alter.o analyze.o attach.o auth.o \ backup.o bitvec.o btmutex.o btree.o build.o \ callback.o complete.o ctime.o \ date.o dbpage.o dbstat.o delete.o \ expr.o fault.o fkey.o \ fts3.o fts3_aux.o fts3_expr.o fts3_hash.o fts3_icu.o \ fts3_porter.o fts3_snippet.o fts3_tokenizer.o fts3_tokenizer1.o \ fts3_tokenize_vtab.o \ fts3_unicode.o fts3_unicode2.o fts3_write.o \ fts5.o \ func.o global.o hash.o \ icu.o insert.o json.o legacy.o loadext.o \ main.o malloc.o mem0.o mem1.o mem2.o mem3.o mem5.o \ memdb.o memjournal.o \ mutex.o mutex_noop.o mutex_unix.o mutex_w32.o \ notify.o opcodes.o os.o os_kv.o os_unix.o os_win.o \ pager.o parse.o pcache.o pcache1.o pragma.o prepare.o printf.o \ random.o resolve.o rowset.o rtree.o \ sqlite3session.o select.o sqlite3rbu.o status.o stmt.o \ table.o threads.o tokenize.o treeview.o trigger.o \ update.o upsert.o utf.o util.o vacuum.o \ vdbe.o vdbeapi.o vdbeaux.o vdbeblob.o vdbemem.o vdbesort.o \ vdbetrace.o vdbevtab.o vtab.o \ wal.o walker.o where.o wherecode.o whereexpr.o \ window.o LIBOBJS = $(LIBOBJS0) # # Object files for the amalgamation. # LIBOBJS1 = sqlite3.o # # Determine the real value of LIBOBJ based on whether the amalgamation # is enabled or not. # LIBOBJ = $(LIBOBJS$(USE_AMALGAMATION)) $(LIBOBJ): $(MAKE_SANITY_CHECK) # # All of the source code files. # SRC = \ $(TOP)/src/alter.c \ $(TOP)/src/analyze.c \ $(TOP)/src/attach.c \ $(TOP)/src/auth.c \ $(TOP)/src/backup.c \ $(TOP)/src/bitvec.c \ $(TOP)/src/btmutex.c \ $(TOP)/src/btree.c \ $(TOP)/src/btree.h \ $(TOP)/src/btreeInt.h \ $(TOP)/src/build.c \ $(TOP)/src/callback.c \ $(TOP)/src/complete.c \ $(TOP)/src/ctime.c \ $(TOP)/src/date.c \ $(TOP)/src/dbpage.c \ $(TOP)/src/dbstat.c \ $(TOP)/src/delete.c \ $(TOP)/src/expr.c \ $(TOP)/src/fault.c \ $(TOP)/src/fkey.c \ $(TOP)/src/func.c \ $(TOP)/src/global.c \ $(TOP)/src/hash.c \ $(TOP)/src/hash.h \ $(TOP)/src/hwtime.h \ $(TOP)/src/insert.c \ $(TOP)/src/json.c \ $(TOP)/src/legacy.c \ $(TOP)/src/loadext.c \ $(TOP)/src/main.c \ $(TOP)/src/malloc.c \ $(TOP)/src/mem0.c \ $(TOP)/src/mem1.c \ $(TOP)/src/mem2.c \ $(TOP)/src/mem3.c \ $(TOP)/src/mem5.c \ $(TOP)/src/memdb.c \ $(TOP)/src/memjournal.c \ $(TOP)/src/msvc.h \ $(TOP)/src/mutex.c \ $(TOP)/src/mutex.h \ $(TOP)/src/mutex_noop.c \ $(TOP)/src/mutex_unix.c \ $(TOP)/src/mutex_w32.c \ $(TOP)/src/notify.c \ $(TOP)/src/os.c \ $(TOP)/src/os.h \ $(TOP)/src/os_common.h \ $(TOP)/src/os_setup.h \ $(TOP)/src/os_kv.c \ $(TOP)/src/os_unix.c \ $(TOP)/src/os_win.c \ $(TOP)/src/os_win.h \ $(TOP)/src/pager.c \ $(TOP)/src/pager.h \ $(TOP)/src/parse.y \ $(TOP)/src/pcache.c \ $(TOP)/src/pcache.h \ $(TOP)/src/pcache1.c \ $(TOP)/src/pragma.c \ $(TOP)/src/pragma.h \ $(TOP)/src/prepare.c \ $(TOP)/src/printf.c \ $(TOP)/src/random.c \ $(TOP)/src/resolve.c \ $(TOP)/src/rowset.c \ $(TOP)/src/select.c \ $(TOP)/src/status.c \ $(TOP)/src/shell.c.in \ $(TOP)/src/sqlite.h.in \ $(TOP)/src/sqlite3ext.h \ $(TOP)/src/sqliteInt.h \ $(TOP)/src/sqliteLimit.h \ $(TOP)/src/table.c \ $(TOP)/src/tclsqlite.c \ $(TOP)/src/threads.c \ $(TOP)/src/tokenize.c \ $(TOP)/src/treeview.c \ $(TOP)/src/trigger.c \ $(TOP)/src/utf.c \ $(TOP)/src/update.c \ $(TOP)/src/upsert.c \ $(TOP)/src/util.c \ $(TOP)/src/vacuum.c \ $(TOP)/src/vdbe.c \ $(TOP)/src/vdbe.h \ $(TOP)/src/vdbeapi.c \ $(TOP)/src/vdbeaux.c \ $(TOP)/src/vdbeblob.c \ $(TOP)/src/vdbemem.c \ $(TOP)/src/vdbesort.c \ $(TOP)/src/vdbetrace.c \ $(TOP)/src/vdbevtab.c \ $(TOP)/src/vdbeInt.h \ $(TOP)/src/vtab.c \ $(TOP)/src/vxworks.h \ $(TOP)/src/wal.c \ $(TOP)/src/wal.h \ $(TOP)/src/walker.c \ $(TOP)/src/where.c \ $(TOP)/src/wherecode.c \ $(TOP)/src/whereexpr.c \ $(TOP)/src/whereInt.h \ $(TOP)/src/window.c # Source code for extensions # SRC += \ $(TOP)/ext/fts3/fts3.c \ $(TOP)/ext/fts3/fts3.h \ $(TOP)/ext/fts3/fts3Int.h \ $(TOP)/ext/fts3/fts3_aux.c \ $(TOP)/ext/fts3/fts3_expr.c \ $(TOP)/ext/fts3/fts3_hash.c \ $(TOP)/ext/fts3/fts3_hash.h \ $(TOP)/ext/fts3/fts3_icu.c \ $(TOP)/ext/fts3/fts3_porter.c \ $(TOP)/ext/fts3/fts3_snippet.c \ $(TOP)/ext/fts3/fts3_tokenizer.h \ $(TOP)/ext/fts3/fts3_tokenizer.c \ $(TOP)/ext/fts3/fts3_tokenizer1.c \ $(TOP)/ext/fts3/fts3_tokenize_vtab.c \ $(TOP)/ext/fts3/fts3_unicode.c \ $(TOP)/ext/fts3/fts3_unicode2.c \ $(TOP)/ext/fts3/fts3_write.c SRC += \ $(TOP)/ext/icu/sqliteicu.h \ $(TOP)/ext/icu/icu.c SRC += \ $(TOP)/ext/rtree/rtree.h \ $(TOP)/ext/rtree/rtree.c \ $(TOP)/ext/rtree/geopoly.c SRC += \ $(TOP)/ext/session/sqlite3session.c \ $(TOP)/ext/session/sqlite3session.h SRC += \ $(TOP)/ext/rbu/sqlite3rbu.h \ $(TOP)/ext/rbu/sqlite3rbu.c SRC += \ $(TOP)/ext/misc/stmt.c # Generated source code files # SRC += \ keywordhash.h \ opcodes.c \ opcodes.h \ parse.c \ parse.h \ sqlite_cfg.h \ shell.c \ sqlite3.h # Source code to the test files. # TESTSRC = \ $(TOP)/src/test1.c \ $(TOP)/src/test2.c \ $(TOP)/src/test3.c \ $(TOP)/src/test4.c \ $(TOP)/src/test5.c \ $(TOP)/src/test6.c \ $(TOP)/src/test8.c \ $(TOP)/src/test9.c \ $(TOP)/src/test_autoext.c \ $(TOP)/src/test_backup.c \ $(TOP)/src/test_bestindex.c \ $(TOP)/src/test_blob.c \ $(TOP)/src/test_btree.c \ $(TOP)/src/test_config.c \ $(TOP)/src/test_delete.c \ $(TOP)/src/test_demovfs.c \ $(TOP)/src/test_devsym.c \ $(TOP)/src/test_fs.c \ $(TOP)/src/test_func.c \ $(TOP)/src/test_hexio.c \ $(TOP)/src/test_init.c \ $(TOP)/src/test_intarray.c \ $(TOP)/src/test_journal.c \ $(TOP)/src/test_malloc.c \ $(TOP)/src/test_md5.c \ $(TOP)/src/test_multiplex.c \ $(TOP)/src/test_mutex.c \ $(TOP)/src/test_onefile.c \ $(TOP)/src/test_osinst.c \ $(TOP)/src/test_pcache.c \ $(TOP)/src/test_quota.c \ $(TOP)/src/test_rtree.c \ $(TOP)/src/test_schema.c \ $(TOP)/src/test_superlock.c \ $(TOP)/src/test_syscall.c \ $(TOP)/src/test_tclsh.c \ $(TOP)/src/test_tclvar.c \ $(TOP)/src/test_thread.c \ $(TOP)/src/test_vdbecov.c \ $(TOP)/src/test_vfs.c \ $(TOP)/src/test_windirent.c \ $(TOP)/src/test_window.c \ $(TOP)/src/test_wsd.c \ $(TOP)/ext/fts3/fts3_term.c \ $(TOP)/ext/fts3/fts3_test.c \ $(TOP)/ext/session/test_session.c \ $(TOP)/ext/recover/sqlite3recover.c \ $(TOP)/ext/recover/dbdata.c \ $(TOP)/ext/recover/test_recover.c \ $(TOP)/ext/intck/test_intck.c \ $(TOP)/ext/intck/sqlite3intck.c \ $(TOP)/ext/rbu/test_rbu.c # Statically linked extensions # TESTSRC += \ $(TOP)/ext/expert/sqlite3expert.c \ $(TOP)/ext/expert/test_expert.c \ $(TOP)/ext/misc/amatch.c \ $(TOP)/ext/misc/appendvfs.c \ $(TOP)/ext/misc/basexx.c \ $(TOP)/ext/misc/carray.c \ $(TOP)/ext/misc/cksumvfs.c \ $(TOP)/ext/misc/closure.c \ $(TOP)/ext/misc/csv.c \ $(TOP)/ext/misc/decimal.c \ $(TOP)/ext/misc/eval.c \ $(TOP)/ext/misc/explain.c \ $(TOP)/ext/misc/fileio.c \ $(TOP)/ext/misc/fuzzer.c \ $(TOP)/ext/fts5/fts5_tcl.c \ $(TOP)/ext/fts5/fts5_test_mi.c \ $(TOP)/ext/fts5/fts5_test_tok.c \ $(TOP)/ext/misc/ieee754.c \ $(TOP)/ext/misc/mmapwarm.c \ $(TOP)/ext/misc/nextchar.c \ $(TOP)/ext/misc/normalize.c \ $(TOP)/ext/misc/percentile.c \ $(TOP)/ext/misc/prefixes.c \ $(TOP)/ext/misc/qpvtab.c \ $(TOP)/ext/misc/randomjson.c \ $(TOP)/ext/misc/regexp.c \ $(TOP)/ext/misc/remember.c \ $(TOP)/ext/misc/series.c \ $(TOP)/ext/misc/spellfix.c \ $(TOP)/ext/misc/stmtrand.c \ $(TOP)/ext/misc/totype.c \ $(TOP)/ext/misc/unionvtab.c \ $(TOP)/ext/misc/wholenumber.c \ $(TOP)/ext/misc/zipfile.c \ $(TOP)/ext/rtree/test_rtreedoc.c # Source code to the library files needed by the test fixture # TESTSRC2 = \ $(TOP)/src/attach.c \ $(TOP)/src/backup.c \ $(TOP)/src/bitvec.c \ $(TOP)/src/btree.c \ $(TOP)/src/build.c \ $(TOP)/src/ctime.c \ $(TOP)/src/date.c \ $(TOP)/src/dbpage.c \ $(TOP)/src/dbstat.c \ $(TOP)/src/expr.c \ $(TOP)/src/func.c \ $(TOP)/src/global.c \ $(TOP)/src/insert.c \ $(TOP)/src/wal.c \ $(TOP)/src/main.c \ $(TOP)/src/mem5.c \ $(TOP)/src/os.c \ $(TOP)/src/os_kv.c \ $(TOP)/src/os_unix.c \ $(TOP)/src/os_win.c \ $(TOP)/src/pager.c \ $(TOP)/src/pragma.c \ $(TOP)/src/prepare.c \ $(TOP)/src/printf.c \ $(TOP)/src/random.c \ $(TOP)/src/pcache.c \ $(TOP)/src/pcache1.c \ $(TOP)/src/select.c \ $(TOP)/src/tokenize.c \ $(TOP)/src/treeview.c \ $(TOP)/src/utf.c \ $(TOP)/src/util.c \ $(TOP)/src/vdbeapi.c \ $(TOP)/src/vdbeaux.c \ $(TOP)/src/vdbe.c \ $(TOP)/src/vdbemem.c \ $(TOP)/src/vdbetrace.c \ $(TOP)/src/vdbevtab.c \ $(TOP)/src/where.c \ $(TOP)/src/wherecode.c \ $(TOP)/src/whereexpr.c \ $(TOP)/src/window.c \ parse.c \ $(TOP)/ext/fts3/fts3.c \ $(TOP)/ext/fts3/fts3_aux.c \ $(TOP)/ext/fts3/fts3_expr.c \ $(TOP)/ext/fts3/fts3_tokenizer.c \ $(TOP)/ext/fts3/fts3_write.c \ $(TOP)/ext/session/sqlite3session.c \ $(TOP)/ext/misc/stmt.c \ fts5.c # Header files used by all library source files. # HDR = \ $(TOP)/src/btree.h \ $(TOP)/src/btreeInt.h \ $(TOP)/src/hash.h \ $(TOP)/src/hwtime.h \ keywordhash.h \ $(TOP)/src/msvc.h \ $(TOP)/src/mutex.h \ opcodes.h \ $(TOP)/src/os.h \ $(TOP)/src/os_common.h \ $(TOP)/src/os_setup.h \ $(TOP)/src/os_win.h \ $(TOP)/src/pager.h \ $(TOP)/src/pcache.h \ parse.h \ $(TOP)/src/pragma.h \ sqlite3.h \ $(TOP)/src/sqlite3ext.h \ $(TOP)/src/sqliteInt.h \ $(TOP)/src/sqliteLimit.h \ $(TOP)/src/vdbe.h \ $(TOP)/src/vdbeInt.h \ $(TOP)/src/vxworks.h \ $(TOP)/src/whereInt.h \ sqlite_cfg.h # Reminder: sqlite_cfg.h is typically created by the configure script # Header files used by extensions # EXTHDR += \ $(TOP)/ext/fts3/fts3.h \ $(TOP)/ext/fts3/fts3Int.h \ $(TOP)/ext/fts3/fts3_hash.h \ $(TOP)/ext/fts3/fts3_tokenizer.h EXTHDR += \ $(TOP)/ext/rtree/rtree.h \ $(TOP)/ext/rtree/geopoly.c EXTHDR += \ $(TOP)/ext/icu/sqliteicu.h EXTHDR += \ $(TOP)/ext/rtree/sqlite3rtree.h # # Executables needed for testing # TESTPROGS = \ testfixture$(T.exe) \ sqlite3$(T.exe) \ sqlite3_analyzer$(T.exe) \ sqldiff$(T.exe) \ dbhash$(T.exe) \ sqltclsh$(T.exe) # Databases containing fuzzer test cases # FUZZDATA = \ $(TOP)/test/fuzzdata1.db \ $(TOP)/test/fuzzdata2.db \ $(TOP)/test/fuzzdata3.db \ $(TOP)/test/fuzzdata4.db \ $(TOP)/test/fuzzdata5.db \ $(TOP)/test/fuzzdata6.db \ $(TOP)/test/fuzzdata7.db \ $(TOP)/test/fuzzdata8.db # # Standard options to testfixture # TESTOPTS = --verbose=file --output=test-out.txt # # Extra compiler options for various shell tools # # Note that some of these will only apply when embedding sqlite3.c # into the shell, as these flags are not otherwise passed on to the # library. SHELL_OPT += -DSQLITE_DQS=0 SHELL_OPT += -DSQLITE_ENABLE_FTS4 #SHELL_OPT += -DSQLITE_ENABLE_FTS5 SHELL_OPT += -DSQLITE_ENABLE_RTREE SHELL_OPT += -DSQLITE_ENABLE_EXPLAIN_COMMENTS SHELL_OPT += -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION SHELL_OPT += -DSQLITE_ENABLE_STMTVTAB SHELL_OPT += -DSQLITE_ENABLE_DBPAGE_VTAB SHELL_OPT += -DSQLITE_ENABLE_DBSTAT_VTAB SHELL_OPT += -DSQLITE_ENABLE_BYTECODE_VTAB SHELL_OPT += -DSQLITE_ENABLE_OFFSET_SQL_FUNC SHELL_OPT += -DSQLITE_STRICT_SUBTYPE=1 FUZZERSHELL_OPT = FUZZCHECK_OPT += -I$(TOP)/test FUZZCHECK_OPT += -I$(TOP)/ext/recover FUZZCHECK_OPT += \ -DSQLITE_OSS_FUZZ \ -DSQLITE_ENABLE_BYTECODE_VTAB \ -DSQLITE_ENABLE_DBPAGE_VTAB \ -DSQLITE_ENABLE_DBSTAT_VTAB \ -DSQLITE_ENABLE_BYTECODE_VTAB \ -DSQLITE_ENABLE_DESERIALIZE \ -DSQLITE_ENABLE_EXPLAIN_COMMENTS \ -DSQLITE_ENABLE_FTS3_PARENTHESIS \ -DSQLITE_ENABLE_FTS4 \ -DSQLITE_ENABLE_FTS5 \ -DSQLITE_ENABLE_GEOPOLY \ -DSQLITE_ENABLE_MATH_FUNCTIONS \ -DSQLITE_ENABLE_MEMSYS5 \ -DSQLITE_ENABLE_NORMALIZE \ -DSQLITE_ENABLE_OFFSET_SQL_FUNC \ -DSQLITE_ENABLE_PREUPDATE_HOOK \ -DSQLITE_ENABLE_RTREE \ -DSQLITE_ENABLE_SESSION \ -DSQLITE_ENABLE_STMTVTAB \ -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION \ -DSQLITE_ENABLE_STAT4 \ -DSQLITE_ENABLE_STMT_SCANSTATUS \ -DSQLITE_MAX_MEMORY=50000000 \ -DSQLITE_MAX_MMAP_SIZE=0 \ -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_PRINTF_PRECISION_LIMIT=1000 \ -DSQLITE_PRIVATE="" \ -DSQLITE_STRICT_SUBTYPE=1 \ -DSQLITE_STATIC_RANDOMJSON FUZZCHECK_SRC += $(TOP)/test/fuzzcheck.c FUZZCHECK_SRC += $(TOP)/test/ossfuzz.c FUZZCHECK_SRC += $(TOP)/test/fuzzinvariants.c FUZZCHECK_SRC += $(TOP)/ext/recover/dbdata.c FUZZCHECK_SRC += $(TOP)/ext/recover/sqlite3recover.c FUZZCHECK_SRC += $(TOP)/test/vt02.c FUZZCHECK_SRC += $(TOP)/ext/misc/percentile.c FUZZCHECK_SRC += $(TOP)/ext/misc/randomjson.c DBFUZZ_OPT = ST_OPT = -DSQLITE_OS_KV_OPTIONAL $(TCLSH_CMD): has_tclsh84: sh $(TOP)/tool/cktclsh.sh 8.4 $(TCLSH_CMD) touch has_tclsh84 has_tclsh85: sh $(TOP)/tool/cktclsh.sh 8.5 $(TCLSH_CMD) touch has_tclsh85 # # $(T.tcl.env.sh) is a shell script intended for source'ing to set # various TCL config info in the current shell context: # # - All info exported by tclConfig.sh # # - TCLLIBDIR = the first entry from TCL's $auto_path which refers to # an existing dir, then append /sqlite3 to it. If TCLLIBDIR is # provided via the environment, that value is used instead. # # Maintenance reminder: the ./ at the start of the name is required or /bin/sh # refuses to source it: # # . .tclenv.sh ==> .tclenv.sh: not found # . ./.tclenv.sh ==> fine # # It took half an hour to figure that out. # T.tcl.env.sh = ./.tclenv.sh $(T.tcl.env.sh): $(TCLSH_CMD) $(TCL_CONFIG_SH) $(MAKEFILE_LIST) @if [ x = "x$(TCL_CONFIG_SH)" ]; then \ echo 'TCL_CONFIG_SH must be set to point to a "tclConfig.sh"' 1>&2; exit 1; \ fi; \ if [ x != "x$(TCLLIBDIR)" ]; then echo TCLLIBDIR="$(TCLLIBDIR)"; else \ ld= ; \ for d in `echo "puts stdout \\$$auto_path" | $(TCLSH_CMD)`; do \ if [ -d "$$d" ]; then ld=$$d; break; fi; \ done; \ if [ x = "x$$ld" ]; then echo "Cannot determine TCLLIBDIR" 1>&2; exit 1; fi; \ echo "TCLLIBDIR=$$ld/sqlite3"; \ fi > $@; \ echo ". \"$(TCL_CONFIG_SH)\" || exit \$$?" >> $@; \ echo "Created $@" # # $(T.tcl.env.source) is shell code to be run as part of any # compilation or link step which requires vars from # $(TCL_CONFIG_SH). All targets which use this should also have a # dependency on $(T.tcl.env.sh). # T.tcl.env.source = . $(T.tcl.env.sh) || exit $$? # # $(T.compile.tcl) and $(T.link.tcl) are TCL-specific counterparts for $(T.compile) # and $(T.link) which first invoke $(T.tcl.env.source). Any targets which used them # must have a dependency on $(T.tcl.env.sh) # T.compile.tcl = $(T.tcl.env.source); $(T.compile) $(CFLAGS.intree_includes) T.link.tcl = $(T.tcl.env.source); $(T.link) # # This target creates a directory named "tsrc" and fills it with # copies of all of the C source code and header files needed to # build on the target system. Some of the C source code and header # files are automatically generated. This target takes care of # all that automatic generation. # .target_source: $(MAKE_SANITY_CHECK) $(SRC) $(TOP)/tool/vdbe-compress.tcl \ fts5.c $(B.tclsh) rm -rf tsrc mkdir tsrc cp -f $(SRC) tsrc rm -f tsrc/sqlite.h.in tsrc/parse.y $(B.tclsh) $(TOP)/tool/vdbe-compress.tcl $(OPTS) <tsrc/vdbe.c >vdbe.new mv -f vdbe.new tsrc/vdbe.c cp fts5.c fts5.h tsrc touch .target_source libsqlite3.LIB = libsqlite3$(T.lib) libsqlite3.SO = libsqlite3$(T.dll) # Rules to build the LEMON compiler generator # lemon$(B.exe): $(MAKE_SANITY_CHECK) $(TOP)/tool/lemon.c $(TOP)/tool/lempar.c $(B.cc) -o $@ $(TOP)/tool/lemon.c cp $(TOP)/tool/lempar.c . # Rules to build the program that generates the source-id # mksourceid$(B.exe): $(MAKE_SANITY_CHECK) $(TOP)/tool/mksourceid.c $(B.cc) -o $@ $(TOP)/tool/mksourceid.c sqlite3.h: $(MAKE_SANITY_CHECK) $(TOP)/src/sqlite.h.in \ $(TOP)/manifest mksourceid$(B.exe) \ $(TOP)/VERSION $(B.tclsh) $(B.tclsh) $(TOP)/tool/mksqlite3h.tcl $(TOP) >sqlite3.h sqlite3.c: .target_source sqlite3.h $(TOP)/tool/mksqlite3c.tcl src-verify$(B.exe) \ $(B.tclsh) $(B.tclsh) $(TOP)/tool/mksqlite3c.tcl $(AMALGAMATION_GEN_FLAGS) $(EXTRA_SRC) cp tsrc/sqlite3ext.h . cp $(TOP)/ext/session/sqlite3session.h . sqlite3r.h: sqlite3.h $(B.tclsh) $(B.tclsh) $(TOP)/tool/mksqlite3h.tcl $(TOP) --enable-recover >sqlite3r.h sqlite3r.c: sqlite3.c sqlite3r.h $(B.tclsh) cp $(TOP)/ext/recover/sqlite3recover.c tsrc/ cp $(TOP)/ext/recover/sqlite3recover.h tsrc/ cp $(TOP)/ext/recover/dbdata.c tsrc/ $(B.tclsh) $(TOP)/tool/mksqlite3c.tcl --enable-recover $(AMALGAMATION_GEN_FLAGS) $(EXTRA_SRC) sqlite3ext.h: .target_source cp tsrc/sqlite3ext.h . # Rules to build individual *.o files from generated *.c files. This # applies to: # # parse.o # opcodes.o # DEPS_OBJ_COMMON = $(MAKE_SANITY_CHECK) $(HDR) parse.o: parse.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c parse.c opcodes.o: opcodes.c $(T.cc.sqlite) -c opcodes.c # Rules to build individual *.o files from files in the src directory. # alter.o: $(TOP)/src/alter.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/alter.c analyze.o: $(TOP)/src/analyze.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/analyze.c attach.o: $(TOP)/src/attach.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/attach.c auth.o: $(TOP)/src/auth.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/auth.c backup.o: $(TOP)/src/backup.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/backup.c bitvec.o: $(TOP)/src/bitvec.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/bitvec.c btmutex.o: $(TOP)/src/btmutex.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/btmutex.c btree.o: $(TOP)/src/btree.c $(DEPS_OBJ_COMMON) $(TOP)/src/pager.h $(T.cc.sqlite) -c $(TOP)/src/btree.c build.o: $(TOP)/src/build.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/build.c callback.o: $(TOP)/src/callback.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/callback.c complete.o: $(TOP)/src/complete.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/complete.c ctime.o: $(TOP)/src/ctime.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/ctime.c date.o: $(TOP)/src/date.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/date.c dbpage.o: $(TOP)/src/dbpage.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/dbpage.c dbstat.o: $(TOP)/src/dbstat.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/dbstat.c delete.o: $(TOP)/src/delete.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/delete.c expr.o: $(TOP)/src/expr.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/expr.c fault.o: $(TOP)/src/fault.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/fault.c fkey.o: $(TOP)/src/fkey.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/fkey.c func.o: $(TOP)/src/func.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/func.c global.o: $(TOP)/src/global.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/global.c hash.o: $(TOP)/src/hash.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/hash.c insert.o: $(TOP)/src/insert.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/insert.c json.o: $(TOP)/src/json.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/json.c legacy.o: $(TOP)/src/legacy.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/legacy.c loadext.o: $(TOP)/src/loadext.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/loadext.c main.o: $(TOP)/src/main.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/main.c malloc.o: $(TOP)/src/malloc.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/malloc.c mem0.o: $(TOP)/src/mem0.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mem0.c mem1.o: $(TOP)/src/mem1.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mem1.c mem2.o: $(TOP)/src/mem2.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mem2.c mem3.o: $(TOP)/src/mem3.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mem3.c mem5.o: $(TOP)/src/mem5.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mem5.c memdb.o: $(TOP)/src/memdb.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/memdb.c memjournal.o: $(TOP)/src/memjournal.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/memjournal.c mutex.o: $(TOP)/src/mutex.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mutex.c mutex_noop.o: $(TOP)/src/mutex_noop.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mutex_noop.c mutex_unix.o: $(TOP)/src/mutex_unix.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mutex_unix.c mutex_w32.o: $(TOP)/src/mutex_w32.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/mutex_w32.c notify.o: $(TOP)/src/notify.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/notify.c pager.o: $(TOP)/src/pager.c $(DEPS_OBJ_COMMON) $(TOP)/src/pager.h $(T.cc.sqlite) -c $(TOP)/src/pager.c pcache.o: $(TOP)/src/pcache.c $(DEPS_OBJ_COMMON) $(TOP)/src/pcache.h $(T.cc.sqlite) -c $(TOP)/src/pcache.c pcache1.o: $(TOP)/src/pcache1.c $(DEPS_OBJ_COMMON) $(TOP)/src/pcache.h $(T.cc.sqlite) -c $(TOP)/src/pcache1.c os.o: $(TOP)/src/os.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/os.c os_kv.o: $(TOP)/src/os_kv.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/os_kv.c os_unix.o: $(TOP)/src/os_unix.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/os_unix.c os_win.o: $(TOP)/src/os_win.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/os_win.c pragma.o: $(TOP)/src/pragma.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/pragma.c prepare.o: $(TOP)/src/prepare.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/prepare.c printf.o: $(TOP)/src/printf.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/printf.c random.o: $(TOP)/src/random.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/random.c resolve.o: $(TOP)/src/resolve.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/resolve.c rowset.o: $(TOP)/src/rowset.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/rowset.c select.o: $(TOP)/src/select.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/select.c status.o: $(TOP)/src/status.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/status.c sqlite3.o: sqlite3.h sqlite3.c $(T.cc.sqlite) -c sqlite3.c table.o: $(TOP)/src/table.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/table.c threads.o: $(TOP)/src/threads.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/threads.c tokenize.o: $(TOP)/src/tokenize.c keywordhash.h $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/tokenize.c treeview.o: $(TOP)/src/treeview.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/treeview.c trigger.o: $(TOP)/src/trigger.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/trigger.c update.o: $(TOP)/src/update.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/update.c upsert.o: $(TOP)/src/upsert.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/upsert.c utf.o: $(TOP)/src/utf.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/utf.c util.o: $(TOP)/src/util.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/util.c vacuum.o: $(TOP)/src/vacuum.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vacuum.c vdbe.o: $(TOP)/src/vdbe.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbe.c vdbeapi.o: $(TOP)/src/vdbeapi.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbeapi.c vdbeaux.o: $(TOP)/src/vdbeaux.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbeaux.c vdbeblob.o: $(TOP)/src/vdbeblob.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbeblob.c vdbemem.o: $(TOP)/src/vdbemem.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbemem.c vdbesort.o: $(TOP)/src/vdbesort.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbesort.c vdbetrace.o: $(TOP)/src/vdbetrace.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbetrace.c vdbevtab.o: $(TOP)/src/vdbevtab.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vdbevtab.c vtab.o: $(TOP)/src/vtab.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/vtab.c wal.o: $(TOP)/src/wal.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/wal.c walker.o: $(TOP)/src/walker.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/walker.c where.o: $(TOP)/src/where.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/where.c wherecode.o: $(TOP)/src/wherecode.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/wherecode.c whereexpr.o: $(TOP)/src/whereexpr.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/whereexpr.c window.o: $(TOP)/src/window.c $(DEPS_OBJ_COMMON) $(T.cc.sqlite) -c $(TOP)/src/window.c tclsqlite.o: $(T.tcl.env.sh) $(TOP)/src/tclsqlite.c $(DEPS_OBJ_COMMON) $(T.compile.tcl) -DUSE_TCL_STUBS=1 $$TCL_INCLUDE_SPEC \ -c $(TOP)/src/tclsqlite.c tclsqlite-shell.o: $(T.tcl.env.sh) $(TOP)/src/tclsqlite.c $(DEPS_OBJ_COMMON) $(T.compile.tcl) -DTCLSH -o $@ -c $(TOP)/src/tclsqlite.c $$TCL_INCLUDE_SPEC tclsqlite-stubs.o: $(T.tcl.env.sh) $(TOP)/src/tclsqlite.c $(DEPS_OBJ_COMMON) $(T.compile.tcl) -DUSE_TCL_STUBS=1 -o $@ -c $(TOP)/src/tclsqlite.c $$TCL_INCLUDE_SPEC tclsqlite3$(T.exe): $(T.tcl.env.sh) tclsqlite-shell.o $(libsqlite3.SO) $(T.link.tcl) -o $@ tclsqlite-shell.o \ $(libsqlite3.SO) $$TCL_INCLUDE_SPEC $$TCL_LIB_SPEC \ $(LDFLAGS.libsqlite3) tclsqlite3$(T.exe)-1: tclsqlite3$(T.exe) tclsqlite3$(T.exe)-0 tclsqlite3$(T.exe)-: tcl: tclsqlite3$(T.exe)-$(HAVE_TCL) # Rules to build opcodes.c and opcodes.h # opcodes.c: opcodes.h $(TOP)/tool/mkopcodec.tcl $(B.tclsh) $(B.tclsh) $(TOP)/tool/mkopcodec.tcl opcodes.h >opcodes.c opcodes.h: parse.h $(TOP)/src/vdbe.c \ $(TOP)/tool/mkopcodeh.tcl $(B.tclsh) cat parse.h $(TOP)/src/vdbe.c | $(B.tclsh) $(TOP)/tool/mkopcodeh.tcl >opcodes.h # Rules to build parse.c and parse.h - the outputs of lemon. # parse.h: parse.c parse.c: $(TOP)/src/parse.y lemon$(B.exe) cp $(TOP)/src/parse.y . ./lemon$(B.exe) $(OPT_FEATURE_FLAGS) $(OPTS) -S parse.y sqlite3rc.h: $(TOP)/src/sqlite3.rc $(TOP)/VERSION $(B.tclsh) echo '#ifndef SQLITE_RESOURCE_VERSION' >$@ echo -n '#define SQLITE_RESOURCE_VERSION ' >>$@ cat $(TOP)/VERSION | $(B.tclsh) $(TOP)/tool/replace.tcl exact . , >>$@ echo '#endif' >>sqlite3rc.h mkkeywordhash$(B.exe): $(TOP)/tool/mkkeywordhash.c $(B.cc) -o $@ $(OPT_FEATURE_FLAGS) $(OPTS) $(TOP)/tool/mkkeywordhash.c keywordhash.h: mkkeywordhash$(B.exe) ./mkkeywordhash$(B.exe) > $@ # # sqlite3.c split into many smaller files. # sqlite3-all.c: sqlite3.c $(TOP)/tool/split-sqlite3c.tcl $(B.tclsh) $(B.tclsh) $(TOP)/tool/split-sqlite3c.tcl # # Static libsqlite3 # $(libsqlite3.LIB): $(LIBOBJ) $(AR) $(AR.flags) $@ $(LIBOBJ) $(libsqlite3.LIB)-1: $(libsqlite3.LIB) $(libsqlite3.LIB)-0 $(libsqlite3.LIB)-: lib: $(libsqlite3.LIB)-$(ENABLE_STATIC) all: lib # # Dynamic libsqlite3 # $(libsqlite3.SO): $(LIBOBJ) $(T.link.shared) -o $@ $(LIBOBJ) $(LDFLAGS.libsqlite3) \ $(LDFLAGS.libsqlite3.soname) $(libsqlite3.SO)-1: $(libsqlite3.SO) $(libsqlite3.SO)-0 $(libsqlite3.SO)-: so: $(libsqlite3.SO)-$(ENABLE_SHARED) all: so # # Install the $(libsqlite3.SO) as $(libsqlite3.SO).$(PACKAGE_VERSION) # and create symlinks which point to it: # # - libsqlite3.so.$(PACKAGE_VERSION) # - libsqlite3.so.0 =symlink-> libsqlite3.so.$(PACKAGE_VERSION) (see below) # - libsqlite3.so =symlink-> libsqlite3.so.3 # # N.B. we initially had a link named libsqlite3.so.3 but it's # unnecessary unless we want to set SONAME to libsqlite3.so.3, which # is also unnecessary. # # The link named libsqlite3.so.0 is provided in an attempt to reduce # downstream disruption when performing upgrades from pre-3.48 to a # version 3.48 or higher. That name is considered a legacy remnant # and will eventually be removed from this installation process. # # Historically libtool installed the library like so: # # libsqlite3.so -> libsqlite3.so.0.8.6 # libsqlite3.so.0 -> libsqlite3.so.0.8.6 # libsqlite3.so.0.8.6 # # The historical SQLite build always used a version number of 0.8.6 # for reasons lost to history but having something to do with libtool # (which is no longer used in this tree). In order to retain filename # compatibility for systems which have libraries installed using those # conventions: # # 1) If libsqlite3.so.0.8.6 is found in the target installation # directory then it is re-linked to point to the newer-style # names. We cannot retain both the old and new installation because # they both share the high-level name $(libsqlite3.SO). The # down-side of this is that it may upset packaging tools when we # replace libsqlite3.so (from a legacy package) with a new symlink. # # 2) If INSTALL_SO_086_LINK=1 and point (1) does not apply then links # to the legacy-style names are created. The primary intent of this # is to enable chains of operations such as the hypothetical (apt # remove sqlite3-3.47.0 && apt install sqlite3-3.48.0). In such # cases, condition (1) would never trigger but applications might # still expect to see the legacy file names. # # In either case, libsqlite3.la, if found, is deleted because it would # contain stale state, refering to non-libtool-generated libraries. # install-so-1: $(install-dir.lib) $(libsqlite3.SO) $(INSTALL) $(libsqlite3.SO) "$(install-dir.lib)" @echo "Setting up $(libsqlite3.SO) symlinks..."; \ cd "$(install-dir.lib)" || exit $$?; \ rm -f $(libsqlite3.SO).0 $(libsqlite3.SO).$(PACKAGE_VERSION) || exit $$?; \ mv $(libsqlite3.SO) $(libsqlite3.SO).$(PACKAGE_VERSION) || exit $$?; \ ln -s $(libsqlite3.SO).$(PACKAGE_VERSION) $(libsqlite3.SO) || exit $$?; \ ln -s $(libsqlite3.SO).$(PACKAGE_VERSION) $(libsqlite3.SO).0 || exit $$?; \ ls -la $(libsqlite3.SO) $(libsqlite3.SO).[03]*; \ if [ -e $(libsqlite3.SO).0.8.6 ]; then \ echo "ACHTUNG: legacy libtool-compatible install found. Re-linking it..."; \ rm -f libsqlite3.la $(libsqlite3.SO).0.8.6 || exit $$?; \ ln -s $(libsqlite3.SO).$(PACKAGE_VERSION) $(libsqlite3.SO).0.8.6 || exit $$?; \ ls -la $(libsqlite3.SO).0.8.6; \ elif [ x1 = "x$(INSTALL_SO_086_LINK)" ]; then \ echo "ACHTUNG: installing legacy libtool-style links because INSTALL_SO_086_LINK=1"; \ rm -f libsqlite3.la $(libsqlite3.SO).0.8.6 || exit $$?; \ ln -s $(libsqlite3.SO).$(PACKAGE_VERSION) $(libsqlite3.SO).0.8.6 || exit $$?; \ ls -la $(libsqlite3.SO).0.8.6; \ fi install-so-0 install-so-: install-so: install-so-$(ENABLE_SHARED) install: install-so # # Install $(libsqlite3.LIB) # install-lib-1: $(install-dir.lib) $(libsqlite3.LIB) $(INSTALL.noexec) $(libsqlite3.LIB) "$(install-dir.lib)" install-lib-0 install-lib-: install-lib: install-lib-$(ENABLE_STATIC) install: install-lib # # Install C header files # install-headers: sqlite3.h $(install-dir.include) $(INSTALL.noexec) sqlite3.h "$(TOP)/src/sqlite3ext.h" "$(install-dir.include)" install: install-headers # # libtclsqlite3... # pkgIndex.tcl: echo 'package ifneeded sqlite3 $(PACKAGE_VERSION) [list load [file join $$dir libtclsqlite3[info sharedlibextension]] sqlite3]' > $@ pkgIndex.tcl-1: pkgIndex.tcl pkgIndex.tcl-0 pkgIndex.tcl-: tcl: pkgIndex.tcl-$(HAVE_TCL) libtclsqlite3.SO = libtclsqlite3$(T.dll) $(libtclsqlite3.SO): $(T.tcl.env.sh) tclsqlite.o $(LIBOBJ) $(T.tcl.env.source); \ $(T.link.shared) -o $@ tclsqlite.o \ $$TCL_INCLUDE_SPEC $$TCL_STUB_LIB_SPEC $(LDFLAGS.libsqlite3) \ $(LIBOBJ) -Wl,-rpath,$$TCLLIBDIR # ^^^ that rpath bit is defined as TCL_LD_SEARCH_FLAGS in # tclConfig.sh, but it's defined in such a way as to be useless for a # _static_ makefile. $(libtclsqlite3.SO)-1: $(libtclsqlite3.SO) $(libtclsqlite3.SO)-0 $(libtclsqlite3.SO)-: libtcl: $(libtclsqlite3.SO)-$(HAVE_TCL) tcl: libtcl all: tcl install-tcl-1: $(libtclsqlite3.SO) pkgIndex.tcl $(T.tcl.env.source); \ $(INSTALL) -d "$(DESTDIR)$$TCLLIBDIR"; \ $(INSTALL) $(libtclsqlite3.SO) "$(DESTDIR)$$TCLLIBDIR"; \ $(INSTALL.noexec) pkgIndex.tcl "$(DESTDIR)$$TCLLIBDIR" install-tcl-0 install-tcl-: @echo "TCL support disabled, so not installing $(libtclsqlite3.SO)" install-tcl: install-tcl-$(HAVE_TCL) install: install-tcl tclsqlite3.c: sqlite3.c echo '#ifndef USE_SYSTEM_SQLITE' >tclsqlite3.c cat sqlite3.c >>tclsqlite3.c echo '#endif /* USE_SYSTEM_SQLITE */' >>tclsqlite3.c cat $(TOP)/src/tclsqlite.c >>tclsqlite3.c # # $(CFLAGS.tclextension) = CFLAGS for the tclextension* targets. # CFLAGS.tclextension = $(CFLAGS.intree_includes) $(CFLAGS.env) $(OPT_FEATURE_FLAGS) $(OPTS) # # Build the SQLite TCL extension in a way that make it compatible # with whatever version of TCL is running as $TCLSH_CMD, possibly defined # by --with-tclsh= # tclextension: tclsqlite3.c $(TCLSH_CMD) $(TOP)/tool/buildtclext.tcl --build-only --cc "$(T.cc)" $(CFLAGS.tclextension) # # Install the SQLite TCL extension in a way that is appropriate for $TCLSH_CMD # to find it. # tclextension-install: tclsqlite3.c $(TCLSH_CMD) $(TOP)/tool/buildtclext.tcl --destdir "$(DESTDIR)" --cc "$(T.cc)" $(CFLAGS.tclextension) # # Uninstall the SQLite TCL extension that is used by $TCLSH_CMD. # tclextension-uninstall: $(TCLSH_CMD) $(TOP)/tool/buildtclext.tcl --uninstall # # List all installed the SQLite TCL extensions that is are accessible # by $TCLSH_CMD, including prior versions. # tclextension-list: @ $(TCLSH_CMD) $(TOP)/tool/buildtclext.tcl --info # Verify that the SQLite TCL extension that is loaded by default # in $(TCLSH_CMD) is the same as the version of SQLite for the # current source tree # tclextension-verify: sqlite3.h @ $(TCLSH_CMD) $(TOP)/tool/buildtclext.tcl --version-check # # FTS5 things # FTS5_SRC = \ $(TOP)/ext/fts5/fts5.h \ $(TOP)/ext/fts5/fts5Int.h \ $(TOP)/ext/fts5/fts5_aux.c \ $(TOP)/ext/fts5/fts5_buffer.c \ $(TOP)/ext/fts5/fts5_main.c \ $(TOP)/ext/fts5/fts5_config.c \ $(TOP)/ext/fts5/fts5_expr.c \ $(TOP)/ext/fts5/fts5_hash.c \ $(TOP)/ext/fts5/fts5_index.c \ fts5parse.c fts5parse.h \ $(TOP)/ext/fts5/fts5_storage.c \ $(TOP)/ext/fts5/fts5_tokenize.c \ $(TOP)/ext/fts5/fts5_unicode2.c \ $(TOP)/ext/fts5/fts5_varint.c \ $(TOP)/ext/fts5/fts5_vocab.c \ fts5parse.c: $(TOP)/ext/fts5/fts5parse.y lemon$(B.exe) cp $(TOP)/ext/fts5/fts5parse.y . rm -f fts5parse.h ./lemon$(B.exe) $(OPTS) -S fts5parse.y fts5parse.h: fts5parse.c fts5.c: $(FTS5_SRC) $(B.tclsh) $(B.tclsh) $(TOP)/ext/fts5/tool/mkfts5c.tcl cp $(TOP)/ext/fts5/fts5.h . fts5.o: fts5.c $(DEPS_OBJ_COMMON) $(EXTHDR) $(T.cc.extension) -c fts5.c sqlite3rbu.o: $(TOP)/ext/rbu/sqlite3rbu.c $(DEPS_OBJ_COMMON) $(EXTHDR) $(T.cc.extension) -c $(TOP)/ext/rbu/sqlite3rbu.c # # Rules to build the 'testfixture' application. # # If using the amalgamation, use sqlite3.c directly to build the test # fixture. Otherwise link against libsqlite3.a. (This distinction is # necessary because the test fixture requires non-API symbols which are # hidden when the library is built via the amalgamation). # TESTFIXTURE_FLAGS = -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1 TESTFIXTURE_FLAGS += -DTCLSH_INIT_PROC=sqlite3TestInit TESTFIXTURE_FLAGS += -DSQLITE_SERVER=1 -DSQLITE_PRIVATE="" -DSQLITE_CORE TESTFIXTURE_FLAGS += -DBUILD_sqlite TESTFIXTURE_FLAGS += -DSQLITE_SERIES_CONSTRAINT_VERIFY=1 TESTFIXTURE_FLAGS += -DSQLITE_DEFAULT_PAGE_SIZE=1024 TESTFIXTURE_FLAGS += -DSQLITE_ENABLE_STMTVTAB TESTFIXTURE_FLAGS += -DSQLITE_ENABLE_DBPAGE_VTAB TESTFIXTURE_FLAGS += -DSQLITE_ENABLE_BYTECODE_VTAB TESTFIXTURE_FLAGS += -DSQLITE_CKSUMVFS_STATIC TESTFIXTURE_FLAGS += -DSQLITE_STATIC_RANDOMJSON TESTFIXTURE_FLAGS += -DSQLITE_STRICT_SUBTYPE=1 TESTFIXTURE_SRC0 = $(TESTSRC2) $(libsqlite3.LIB) TESTFIXTURE_SRC1 = sqlite3.c TESTFIXTURE_SRC = $(TESTSRC) $(TOP)/src/tclsqlite.c TESTFIXTURE_SRC += $(TESTFIXTURE_SRC$(USE_AMALGAMATION)) testfixture$(T.exe): $(T.tcl.env.sh) has_tclsh85 $(TESTFIXTURE_SRC) $(T.link.tcl) -DSQLITE_NO_SYNC=1 $(TESTFIXTURE_FLAGS) \ -o $@ $(TESTFIXTURE_SRC) \ $$TCL_LIB_SPEC $$TCL_INCLUDE_SPEC \ $(LDFLAGS.libsqlite3) coretestprogs: testfixture$(B.exe) sqlite3$(B.exe) testprogs: $(TESTPROGS) srcck1$(B.exe) fuzzcheck$(T.exe) sessionfuzz$(T.exe) # A very detailed test running most or all test cases fulltest: alltest fuzztest # Run most or all tcl test cases alltest: $(TESTPROGS) ./testfixture$(T.exe) $(TOP)/test/all.test $(TESTOPTS) # Really really long testing soaktest: $(TESTPROGS) ./testfixture$(T.exe) $(TOP)/test/all.test -soak=1 $(TESTOPTS) # Do extra testing but not everything. fulltestonly: $(TESTPROGS) fuzztest ./testfixture$(T.exe) $(TOP)/test/full.test # # Fuzz testing # # WARNING: When the "fuzztest" target is run by the testrunner.tcl script, # it does not actually run this code. Instead, it schedules equivalent # commands. Therefore, if this target is updated, then code in # testrunner_data.tcl (search for "trd_fuzztest_data") must also be updated. # fuzztest: fuzzcheck$(T.exe) $(FUZZDATA) sessionfuzz$(T.exe) ./fuzzcheck$(T.exe) $(FUZZDATA) ./sessionfuzz$(T.exe) run $(TOP)/test/sessionfuzz-data1.db valgrindfuzz: fuzzcheck$(TEXT) $(FUZZDATA) sessionfuzz$(T.exe) valgrind ./fuzzcheck$(T.exe) --cell-size-check --limit-mem 10M $(FUZZDATA) valgrind ./sessionfuzz$(T.exe) run $(TOP)/test/sessionfuzz-data1.db # # The veryquick.test TCL tests. # tcltest: ./testfixture$(T.exe) ./testfixture$(T.exe) $(TOP)/test/veryquick.test $(TESTOPTS) # # Runs all the same tests cases as the "tcltest" target but uses # the testrunner.tcl script to run them in multiple cores # concurrently. testrunner: testfixture$(T.exe) ./testfixture$(T.exe) $(TOP)/test/testrunner.tcl # # This is the testing target preferred by the core SQLite developers. # It runs tests under a standard configuration, regardless of how # ./configure was run. The devs run "make devtest" prior to each # check-in, at a minimum. Probably other tests too, but at least this # one. # devtest: srctree-check sourcetest $(TCLSH_CMD) $(TOP)/test/testrunner.tcl mdevtest $(TSTRNNR_OPTS) mdevtest: srctree-check has_tclsh85 $(TCLSH_CMD) $(TOP)/test/testrunner.tcl mdevtest $(TSTRNNR_OPTS) sdevtest: has_tclsh85 $(TCLSH_CMD) $(TOP)/test/testrunner.tcl sdevtest $(TSTRNNR_OPTS) # # Validate that various generated files in the source tree # are up-to-date. # srctree-check: $(TOP)/tool/srctree-check.tcl $(TCLSH_CMD) $(TOP)/tool/srctree-check.tcl # # Testing for a release # releasetest: srctree-check has_tclsh85 verify-source $(TCLSH_CMD) $(TOP)/test/testrunner.tcl release $(TSTRNNR_OPTS) # # Minimal testing that runs in less than 3 minutes # quicktest: ./testfixture$(T.exe) ./testfixture$(T.exe) $(TOP)/test/extraquick.test $(TESTOPTS) # # Try to run tests on whatever options are specified by the # ./configure. The developers seldom use this target. Instead # they use "make devtest" which runs tests on a standard set of # options regardless of how SQLite is configured. This "test" # target is provided for legacy only. # test: srctree-check fuzztest sourcetest $(TESTPROGS) tcltest # # Run a test using valgrind. This can take a really long time # because valgrind is so much slower than a native machine. # valgrindtest: $(TESTPROGS) valgrindfuzz OMIT_MISUSE=1 valgrind -v ./testfixture$(T.exe) $(TOP)/test/permutations.test valgrind $(TESTOPTS) # # A very fast test that checks basic sanity. The name comes from # the 60s-era electronics testing: "Turn it on and see if smoke # comes out." # smoketest: $(TESTPROGS) fuzzcheck$(T.exe) ./testfixture$(T.exe) $(TOP)/test/main.test $(TESTOPTS) shelltest: $(TCLSH_CMD) $(TOP)/test/testrunner.tcl release shell # # sqlite3_analyzer.c build depends on $(LINK_TOOLS_DYNAMICALLY). # sqlite3_analyzer.c.flags.0 = -DINCLUDE_SQLITE3_C=1 sqlite3_analyzer.c.flags.1 = sqlite3_analyzer.c: sqlite3.c $(TOP)/src/tclsqlite.c $(TOP)/tool/spaceanal.tcl \ $(TOP)/tool/mkccode.tcl $(TOP)/tool/sqlite3_analyzer.c.in $(B.tclsh) $(TOP)/tool/mkccode.tcl $(TOP)/tool/sqlite3_analyzer.c.in \ $(sqlite3_analyzer.c.flags.$(LINK_TOOLS_DYNAMICALLY)) \ $(OPT_FEATURE_FLAGS) \ > $@ # # sqlite3_analyzer's build mode depends on $(LINK_TOOLS_DYNAMICALLY). # sqlite3_analyzer.flags.1 = -L. -lsqlite3 sqlite3_analyzer.flags.0 = $(LDFLAGS.libsqlite3) sqlite3_analyzer.deps.1 = $(libsqlite3.SO) sqlite3_analyzer.deps.0 = sqlite3_analyzer$(T.exe): $(T.tcl.env.sh) sqlite3_analyzer.c \ $(sqlite3_analyzer.deps.$(LINK_TOOLS_DYNAMICALLY)) $(T.link.tcl) sqlite3_analyzer.c -o $@ \ $(sqlite3_analyzer.flags.$(LINK_TOOLS_DYNAMICALLY)) \ $$TCL_LIB_SPEC $$TCL_INCLUDE_SPEC $$TCL_LIBS # ^^^^ the order of those flags is relevant for # $(sqlite3_analyzer.flags.1): if the $$TCL_... flags come first they # can cause the $@ to link to an out-of-tree libsqlite3.so, which may # or may not fail or otherwise cause confusion. sqltclsh.c: sqlite3.c $(TOP)/src/tclsqlite.c $(TOP)/tool/sqltclsh.tcl \ $(TOP)/ext/misc/appendvfs.c $(TOP)/tool/mkccode.tcl \ $(TOP)/tool/sqltclsh.c.in $(B.tclsh) $(TOP)/tool/mkccode.tcl $(TOP)/tool/sqltclsh.c.in >sqltclsh.c sqltclsh$(T.exe): $(T.tcl.env.sh) sqltclsh.c $(T.link.tcl) sqltclsh.c -o $@ $$TCL_INCLUDE_SPEC \ $(LDFLAGS.libsqlite3) $$TCL_LIB_SPEC $$TCL_LIBS # xbin: target for generic binaries which aren't usually built. It is # used primarily for testing the build process. xbin: sqltclsh$(T.exe) sqlite3_analyzer$(T.exe) sqlite3_expert$(T.exe): $(TOP)/ext/expert/sqlite3expert.h $(TOP)/ext/expert/sqlite3expert.c \ $(TOP)/ext/expert/expert.c sqlite3.c $(T.link) $(TOP)/ext/expert/sqlite3expert.h $(TOP)/ext/expert/sqlite3expert.c \ $(TOP)/ext/expert/expert.c sqlite3.c -o sqlite3_expert $(LDFLAGS.libsqlite3) xbin: sqlite3_expert$(T.exe) CHECKER_DEPS =\ $(TOP)/tool/mkccode.tcl \ sqlite3.c \ $(TOP)/src/tclsqlite.c \ $(TOP)/ext/repair/sqlite3_checker.tcl \ $(TOP)/ext/repair/checkindex.c \ $(TOP)/ext/repair/checkfreelist.c \ $(TOP)/ext/misc/btreeinfo.c \ $(TOP)/ext/repair/sqlite3_checker.c.in sqlite3_checker.c: $(CHECKER_DEPS) $(B.tclsh) $(TOP)/tool/mkccode.tcl $(TOP)/ext/repair/sqlite3_checker.c.in >$@ sqlite3_checker$(T.exe): $(T.tcl.env.sh) sqlite3_checker.c $(T.link.tcl) sqlite3_checker.c -o $@ $$TCL_INCLUDE_SPEC \ $$TCL_LIB_SPEC $(LDFLAGS.libsqlite3) xbin: sqlite3_checker$(T.exe) dbdump$(T.exe): $(TOP)/ext/misc/dbdump.c sqlite3.o $(T.link) -DDBDUMP_STANDALONE -o $@ \ $(TOP)/ext/misc/dbdump.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: dbdump$(T.exe) dbtotxt$(T.exe): $(TOP)/tool/dbtotxt.c $(T.link)-o $@ $(TOP)/tool/dbtotxt.c $(LDFLAGS.configure) xbin: dbtotxt$(T.exe) showdb$(T.exe): $(TOP)/tool/showdb.c sqlite3.o $(T.link) -o $@ $(TOP)/tool/showdb.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: showdb$(T.exe) showstat4$(T.exe): $(TOP)/tool/showstat4.c sqlite3.o $(T.link) -o $@ $(TOP)/tool/showstat4.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: showstat4$(T.exe) showjournal$(T.exe): $(TOP)/tool/showjournal.c sqlite3.o $(T.link) -o $@ $(TOP)/tool/showjournal.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: showjournal$(T.exe) showwal$(T.exe): $(TOP)/tool/showwal.c sqlite3.o $(T.link) -o $@ $(TOP)/tool/showwal.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: showwal$(T.exe) showshm$(T.exe): $(TOP)/tool/showshm.c $(T.link) -o $@ $(TOP)/tool/showshm.c $(LDFLAGS.configure) xbin: showshm$(T.exe) index_usage$(T.exe): $(TOP)/tool/index_usage.c sqlite3.o $(T.link) $(SHELL_OPT) -o $@ $(TOP)/tool/index_usage.c sqlite3.o \ $(LDFLAGS.libsqlite3) xbin: index_usage$(T.exe) # Reminder: changeset does not build without -DSQLITE_ENABLE_SESSION changeset$(T.exe): $(TOP)/ext/session/changeset.c sqlite3.o $(T.link) -o $@ $(TOP)/ext/session/changeset.c sqlite3.o \ $(LDFLAGS.libsqlite3) xbin: changeset$(T.exe) changesetfuzz$(T.exe): $(TOP)/ext/session/changesetfuzz.c sqlite3.o $(T.link) -o $@ $(TOP)/ext/session/changesetfuzz.c sqlite3.o \ $(LDFLAGS.libsqlite3) xbin: changesetfuzz$(T.exe) rollback-test$(T.exe): $(TOP)/tool/rollback-test.c sqlite3.o $(T.link) -o $@ $(TOP)/tool/rollback-test.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: rollback-test$(T.exe) atrc$(T.exe): $(TOP)/test/atrc.c sqlite3.o $(T.link) -o $@ $(TOP)/test/atrc.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: atrc$(T.exe) LogEst$(T.exe): $(TOP)/tool/logest.c sqlite3.h $(T.link) -I. -o $@ $(TOP)/tool/logest.c $(LDFLAGS.configure) xbin: LogEst$(T.exe) wordcount$(T.exe): $(TOP)/test/wordcount.c sqlite3.o $(T.link) -o $@ $(TOP)/test/wordcount.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: wordcount$(T.exe) speedtest1$(T.exe): $(TOP)/test/speedtest1.c sqlite3.c Makefile $(T.link) $(ST_OPT) -o $@ $(TOP)/test/speedtest1.c sqlite3.c \ $(LDFLAGS.libsqlite3) xbin: speedtest1$(T.exe) startup$(T.exe): $(TOP)/test/startup.c sqlite3.c $(T.link) -Os -g -USQLITE_THREADSAFE -DSQLITE_THREADSAFE=0 \ -o $@ $(TOP)/test/startup.c sqlite3.c $(LDFLAGS.libsqlite3) xbin: startup$(T.exe) KV_OPT += -DSQLITE_DIRECT_OVERFLOW_READ kvtest$(T.exe): $(TOP)/test/kvtest.c sqlite3.c $(T.link) $(KV_OPT) -o $@ $(TOP)/test/kvtest.c sqlite3.c \ $(LDFLAGS.libsqlite3) xbin: kvtest$(T.exe) # # rbu$(T.exe) requires building with -DSQLITE_ENABLE_RBU, which # specifically does not have an --enable-rbu flag in the configure # script. rbu$(T.exe): $(TOP)/ext/rbu/rbu.c $(TOP)/ext/rbu/sqlite3rbu.c sqlite3.o $(T.link) -I. -o $@ $(TOP)/ext/rbu/rbu.c sqlite3.o $(LDFLAGS.libsqlite3) loadfts$(T.exe): $(TOP)/tool/loadfts.c $(libsqlite3.LIB) $(T.link) $(TOP)/tool/loadfts.c $(libsqlite3.LIB) \ -o $@ $(LDFLAGS.libsqlite3) xbin: loadfts$(T.exe) # This target will fail if the SQLite amalgamation contains any exported # symbols that do not begin with "sqlite3_". It is run as part of the # releasetest.tcl script. # VALIDIDS=' sqlite3(changeset|changegroup|session|rebaser)?_' checksymbols: sqlite3.o nm -g --defined-only sqlite3.o nm -g --defined-only sqlite3.o | egrep -v $(VALIDIDS); test $$? -ne 0 echo '0 errors out of 1 tests' # Build the amalgamation-autoconf package. The amalamgation-tarball target builds # a tarball named for the version number. Ex: sqlite-autoconf-3110000.tar.gz. # The snapshot-tarball target builds a tarball named by the SHA3 hash # amalgamation-tarball: sqlite3.c sqlite3rc.h TOP=$(TOP) sh $(TOP)/tool/mkautoconfamal.sh --normal snapshot-tarball: sqlite3.c sqlite3rc.h TOP=$(TOP) sh $(TOP)/tool/mkautoconfamal.sh --snapshot # Build a ZIP archive snapshot of the latest check-in. # sqlite-src.zip: $(TOP)/tool/mksrczip.tcl $(TCLSH_CMD) $(TOP)/tool/mksrczip.tcl # Build a ZIP archive of the amaglamation # sqlite-amalgamation.zip: $(TOP)/tool/mkamalzip.tcl sqlite3.c sqlite3.h shell.c sqlite3ext.h $(TCLSH_CMD) $(TOP)/tool/mkamalzip.tcl # Build all the source code deliverables # src-archives: sqlite-amalgamation.zip amalgamation-tarball sqlite-src.zip ls -ltr *.zip *.tar.gz | tail -3 # Build a ZIP archive containing various command-line tools. # tool-zip: testfixture$(T.exe) sqlite3$(T.exe) sqldiff$(T.exe) \ sqlite3_analyzer$(T.exe) sqlite3_rsync$(T.exe) $(TOP)/tool/mktoolzip.tcl strip sqlite3$(T.exe) sqldiff$(T.exe) sqlite3_analyzer$(T.exe) sqlite3_rsync$(T.exe) ./testfixture$(T.exe) $(TOP)/tool/mktoolzip.tcl clean-tool-zip: rm -f sqlite-tools-*.zip clean: clean-tool-zip # # The next few rules are used to support the "threadtest" target. Building # threadtest runs a few thread-safety tests that are implemented in C. This # target is invoked by the releasetest.tcl script. # THREADTEST3_SRC = $(TOP)/test/threadtest3.c \ $(TOP)/test/tt3_checkpoint.c \ $(TOP)/test/tt3_index.c \ $(TOP)/test/tt3_vacuum.c \ $(TOP)/test/tt3_stress.c \ $(TOP)/test/tt3_lookaside1.c threadtest3$(T.exe): sqlite3.o $(THREADTEST3_SRC) $(T.link) $(TOP)/test/threadtest3.c $(TOP)/src/test_multiplex.c sqlite3.o \ -o $@ $(LDFLAGS.libsqlite3) xbin: threadtest3$(T.exe) threadtest: threadtest3$(T.exe) ./threadtest3$(T.exe) threadtest5: sqlite3.c $(TOP)/test/threadtest5.c $(T.link) $(TOP)/test/threadtest5.c sqlite3.c -o $@ $(LDFLAGS.libsqlite3) xbin: threadtest5 # # When building sqlite3$(T.exe) we specifically embed a copy of # sqlite3.c, and not link to libsqlite3.so or libsqlite3.a, because # the shell needs to be able to enable arbitrary library features, # some of which have significant performance impacts. For example,, # SQLITE_ENABLE_EXPLAIN_COMMENTS has been measured as having a 5.2% # runtime performance hit, which is fine for use in the shell but is # not appropriate for the canonical library build. # sqlite3$(T.exe): shell.c sqlite3.c $(T.link) -o $@ \ shell.c sqlite3.c \ $(CFLAGS.readline) $(SHELL_OPT) $(CFLAGS.icu) \ $(LDFLAGS.libsqlite3) $(LDFLAGS.readline) # # Build sqlite3$(T.exe) by default except in wasi-sdk builds. Yes, the # semantics of 0 and 1 are confusingly swapped here. # sqlite3$(T.exe)-1: sqlite3$(T.exe)-0: sqlite3$(T.exe) all: sqlite3$(T.exe)-$(HAVE_WASI_SDK) # The "sqlite3d" CLI is build using separate source files. This # is useful during development and debugging. # sqlite3d$(T.exe): shell.c $(LIBOBJS0) $(T.link) -o $@ \ shell.c $(LIBOBJS0) \ $(CFLAGS.readline) $(SHELL_OPT) \ $(LDFLAGS.libsqlite3) $(LDFLAGS.readline) install-shell-0: sqlite3$(T.exe) $(install-dir.bin) $(INSTALL) -s sqlite3$(T.exe) "$(install-dir.bin)" install-shell-1: install: install-shell-$(HAVE_WASI_SDK) # How to build sqldiff$(T.exe) depends on $(LINK_TOOLS_DYNAMICALLY) # sqldiff.0.deps = $(TOP)/tool/sqldiff.c $(TOP)/ext/misc/sqlite3_stdio.h sqlite3.o sqlite3.h sqldiff.0.rules = $(T.link) -o $@ $(TOP)/tool/sqldiff.c sqlite3.o $(LDFLAGS.libsqlite3) sqldiff.1.deps = $(TOP)/tool/sqldiff.c $(TOP)/ext/misc/sqlite3_stdio.h $(libsqlite3.SO) sqldiff.1.rules = $(T.link) -o $@ $(TOP)/tool/sqldiff.c -L. -lsqlite3 $(LDFLAGS.configure) sqldiff$(T.exe): $(sqldiff.$(LINK_TOOLS_DYNAMICALLY).deps) $(sqldiff.$(LINK_TOOLS_DYNAMICALLY).rules) install-diff: sqldiff$(T.exe) $(install-dir.bin) $(INSTALL) -s sqldiff$(T.exe) "$(install-dir.bin)" #install: install-diff dbhash$(T.exe): $(TOP)/tool/dbhash.c sqlite3.o sqlite3.h $(T.link) -o $@ $(TOP)/tool/dbhash.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: dbhash$(T.exe) RSYNC_SRC = \ $(TOP)/tool/sqlite3_rsync.c \ sqlite3.c RSYNC_OPT = \ -DSQLITE_ENABLE_DBPAGE_VTAB \ -USQLITE_THREADSAFE \ -DSQLITE_THREADSAFE=0 \ -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_OMIT_DEPRECATED sqlite3_rsync$(T.exe): $(RSYNC_SRC) $(T.cc.sqlite) -o $@ $(RSYNC_OPT) $(RSYNC_SRC) $(LDFLAGS.libsqlite3) xbin: sqlite3_rsync$(T.exe) install-rsync: sqlite3_rsync$(T.exe) $(install-dir.bin) $(INSTALL) sqlite3_rsync$(T.exe) "$(install-dir.bin)" #install: install-rsync install-man1: $(install-dir.man1) $(INSTALL.noexec) "$(TOP)/sqlite3.1" "$(install-dir.man1)" install: install-man1 # # sqlite3.pc is typically generated by the configure script but could # conceivably be generated by hand. install-pc: sqlite3.pc $(install-dir.pkgconfig) $(INSTALL.noexec) sqlite3.pc "$(install-dir.pkgconfig)" scrub$(T.exe): $(TOP)/ext/misc/scrub.c sqlite3.o $(T.link) -o $@ -I. -DSCRUB_STANDALONE \ $(TOP)/ext/misc/scrub.c sqlite3.o $(LDFLAGS.libsqlite3) xbin: scrub$(T.exe) srcck1$(B.exe): $(TOP)/tool/srcck1.c $(B.cc) -o srcck1$(B.exe) $(TOP)/tool/srcck1.c xbin: srcck1$(B.exe) sourcetest: srcck1$(B.exe) sqlite3.c ./srcck1$(B.exe) sqlite3.c src-verify$(B.exe): $(TOP)/tool/src-verify.c $(B.cc) -o src-verify$(B.exe) $(TOP)/tool/src-verify.c xbin: src-verify$(B.exe) verify-source: ./src-verify$(B.exe) ./src-verify$(B.exe) $(TOP) fuzzershell$(T.exe): $(TOP)/tool/fuzzershell.c sqlite3.c sqlite3.h $(T.link) -o $@ $(FUZZERSHELL_OPT) \ $(TOP)/tool/fuzzershell.c sqlite3.c $(LDFLAGS.libsqlite3) fuzzy: fuzzershell$(T.exe) xbin: fuzzershell$(T.exe) fuzzcheck$(T.exe): $(FUZZCHECK_SRC) sqlite3.c sqlite3.h $(FUZZCHECK_DEP) $(T.link) -o $@ $(FUZZCHECK_OPT) $(FUZZCHECK_SRC) sqlite3.c $(LDFLAGS.libsqlite3) fuzzy: fuzzcheck$(T.exe) xbin: fuzzcheck$(T.exe) fuzzcheck-asan$(T.exe): $(FUZZCHECK_SRC) sqlite3.c sqlite3.h $(FUZZCHECK_DEP) $(T.link) -o $@ -fsanitize=address $(FUZZCHECK_OPT) $(FUZZCHECK_SRC) \ sqlite3.c $(LDFLAGS.libsqlite3) fuzzy: fuzzcheck-asan$(T.exe) xbin: fuzzcheck-asan$(T.exe) fuzzcheck-ubsan$(T.exe): $(FUZZCHECK_SRC) sqlite3.c sqlite3.h $(FUZZCHECK_DEP) $(T.link) -o $@ -fsanitize=undefined $(FUZZCHECK_OPT) $(FUZZCHECK_SRC) \ sqlite3.c $(LDFLAGS.libsqlite3) fuzzy: fuzzcheck-ubsan$(T.exe) xbin: fuzzcheck-ubsan$(T.exe) # Usage: FUZZDB=filename make run-fuzzcheck # # Where filename is a fuzzcheck database, this target builds and runs # fuzzcheck, fuzzcheck-asan, and fuzzcheck-ubsan on that database. # # FUZZDB can be a glob pattern of two or more databases. Example: # # FUZZDB=test/fuzzdata*.db make run-fuzzcheck # run-fuzzcheck: fuzzcheck$(T.exe) fuzzcheck-asan$(T.exe) fuzzcheck-ubsan$(T.exe) @if test "$(FUZZDB)" = ""; then echo 'ERROR: No FUZZDB specified. Rerun with FUZZDB=filename'; exit 1; fi ./fuzzcheck$(T.exe) --spinner $(FUZZDB) ./fuzzcheck-asan$(T.exe) --spinner $(FUZZDB) ./fuzzcheck-ubsan$(T.exe) --spinner $(FUZZDB) ossshell$(T.exe): $(TOP)/test/ossfuzz.c $(TOP)/test/ossshell.c sqlite3.c sqlite3.h $(T.link) -o $@ $(FUZZCHECK_OPT) $(TOP)/test/ossshell.c \ $(TOP)/test/ossfuzz.c sqlite3.c $(LDFLAGS.libsqlite3) fuzzy: ossshell$(T.exe) xbin: ossshell$(T.exe) sessionfuzz$(T.exe): $(TOP)/test/sessionfuzz.c sqlite3.c sqlite3.h $(T.link) -o $@ $(TOP)/test/sessionfuzz.c $(LDFLAGS.libsqlite3) fuzzy: sessionfuzz$(T.exe) dbfuzz$(T.exe): $(TOP)/test/dbfuzz.c sqlite3.c sqlite3.h $(T.link) -o $@ $(DBFUZZ_OPT) $(TOP)/test/dbfuzz.c sqlite3.c \ $(LDFLAGS.libsqlite3) fuzzy: dbfuzz$(T.exe) xbin: dbfuzz$(T.exe) DBFUZZ2_OPTS = \ -USQLITE_THREADSAFE \ -DSQLITE_THREADSAFE=0 \ -DSQLITE_OMIT_LOAD_EXTENSION \ -DSQLITE_DEBUG \ -DSQLITE_ENABLE_DBSTAT_VTAB \ -DSQLITE_ENABLE_BYTECODE_VTAB \ -DSQLITE_ENABLE_RTREE \ -DSQLITE_ENABLE_FTS4 \ -DSQLITE_ENABLE_FTS5 dbfuzz2$(T.exe): $(TOP)/test/dbfuzz2.c sqlite3.c sqlite3.h $(T.cc) -I. -g -O0 \ -DSTANDALONE -o dbfuzz2 \ $(DBFUZZ2_OPTS) $(TOP)/test/dbfuzz2.c sqlite3.c $(LDFLAGS.libsqlite3) mkdir -p dbfuzz2-dir cp $(TOP)/test/dbfuzz2-seed* dbfuzz2-dir fuzzy: dbfuzz2$(T.exe) xbin: dbfuzz2$(T.exe) mptester$(T.exe): $(libsqlite3.LIB) $(TOP)/mptest/mptest.c $(T.link) -o $@ -I. $(TOP)/mptest/mptest.c $(libsqlite3.LIB) \ $(LDFLAGS.libsqlite3) xbin: mptester$(T.exe) MPTEST1=./mptester$(T.exe) mptest.db $(TOP)/mptest/crash01.test --repeat 20 MPTEST2=./mptester$(T.exe) mptest.db $(TOP)/mptest/multiwrite01.test --repeat 20 mptest: mptester$(T.exe) rm -f mptest.db $(MPTEST1) --journalmode DELETE $(MPTEST2) --journalmode WAL $(MPTEST1) --journalmode WAL $(MPTEST2) --journalmode PERSIST $(MPTEST1) --journalmode PERSIST $(MPTEST2) --journalmode TRUNCATE $(MPTEST1) --journalmode TRUNCATE $(MPTEST2) --journalmode DELETE # Source and header files that shell.c depends on SHELL_DEP = \ $(TOP)/src/shell.c.in \ $(TOP)/ext/expert/sqlite3expert.c \ $(TOP)/ext/expert/sqlite3expert.h \ $(TOP)/ext/intck/sqlite3intck.c \ $(TOP)/ext/intck/sqlite3intck.h \ $(TOP)/ext/misc/appendvfs.c \ $(TOP)/ext/misc/base64.c \ $(TOP)/ext/misc/base85.c \ $(TOP)/ext/misc/completion.c \ $(TOP)/ext/misc/decimal.c \ $(TOP)/ext/misc/fileio.c \ $(TOP)/ext/misc/ieee754.c \ $(TOP)/ext/misc/memtrace.c \ $(TOP)/ext/misc/pcachetrace.c \ $(TOP)/ext/misc/percentile.c \ $(TOP)/ext/misc/regexp.c \ $(TOP)/ext/misc/series.c \ $(TOP)/ext/misc/sha1.c \ $(TOP)/ext/misc/shathree.c \ $(TOP)/ext/misc/sqlar.c \ $(TOP)/ext/misc/uint.c \ $(TOP)/ext/misc/vfstrace.c \ $(TOP)/ext/misc/zipfile.c \ $(TOP)/ext/recover/dbdata.c \ $(TOP)/ext/recover/sqlite3recover.c \ $(TOP)/ext/recover/sqlite3recover.h \ $(TOP)/src/test_windirent.c \ $(TOP)/src/test_windirent.h shell.c: $(SHELL_DEP) $(TOP)/tool/mkshellc.tcl $(B.tclsh) $(B.tclsh) $(TOP)/tool/mkshellc.tcl >shell.c # # Rules to build the extension objects. # DEPS_EXT_COMMON = $(DEPS_OBJ_COMMON) $(EXTHDR) icu.o: $(TOP)/ext/icu/icu.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/icu/icu.c $(CFLAGS.icu) fts3.o: $(TOP)/ext/fts3/fts3.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3.c fts3_aux.o: $(TOP)/ext/fts3/fts3_aux.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_aux.c fts3_expr.o: $(TOP)/ext/fts3/fts3_expr.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_expr.c fts3_hash.o: $(TOP)/ext/fts3/fts3_hash.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_hash.c fts3_icu.o: $(TOP)/ext/fts3/fts3_icu.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_icu.c $(CFLAGS.icu) fts3_porter.o: $(TOP)/ext/fts3/fts3_porter.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_porter.c fts3_snippet.o: $(TOP)/ext/fts3/fts3_snippet.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_snippet.c fts3_tokenizer.o: $(TOP)/ext/fts3/fts3_tokenizer.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_tokenizer.c fts3_tokenizer1.o: $(TOP)/ext/fts3/fts3_tokenizer1.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_tokenizer1.c fts3_tokenize_vtab.o: $(TOP)/ext/fts3/fts3_tokenize_vtab.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_tokenize_vtab.c fts3_unicode.o: $(TOP)/ext/fts3/fts3_unicode.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_unicode.c fts3_unicode2.o: $(TOP)/ext/fts3/fts3_unicode2.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_unicode2.c fts3_write.o: $(TOP)/ext/fts3/fts3_write.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/fts3/fts3_write.c rtree.o: $(TOP)/ext/rtree/rtree.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/rtree/rtree.c sqlite3session.o: $(TOP)/ext/session/sqlite3session.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/session/sqlite3session.c stmt.o: $(TOP)/ext/misc/stmt.c $(DEPS_EXT_COMMON) $(T.cc.extension) -c $(TOP)/ext/misc/stmt.c # # Windows section # dll: sqlite3.dll sqlite3.def: $(LIBOBJ) echo 'EXPORTS' >sqlite3.def nm $(LIBOBJ) | grep ' T ' | grep ' _sqlite3_' \ | sed 's/^.* _//' >>sqlite3.def sqlite3.dll: $(LIBOBJ) sqlite3.def $(T.cc.sqlite) $(LDFLAGS.shlib) -o $@ sqlite3.def \ -Wl,"--strip-all" $(LIBOBJ) $(LDFLAGS.configure) # # Emit a list of commonly-used targets help: @echo; echo "Frequently-used high-level make targets:"; echo; \ echo " - all [default] = builds most components"; \ echo " - clean = cleans up most build products"; \ echo " - distclean = cleans up all build products"; \ echo " - install = installs activated components"; \ echo; echo "Testing-related targets:"; echo; \ echo " - test = a number of sanity checks"; \ echo " - quicktest = minimal tests"; \ echo " - releasetest = pre-release tests"; \ echo " - devtest = Minimum tests required before code check-ins"; \ echo " - mdevtest = A variant of devtest"; \ echo " - sdevtest = A variant of devtest"; \ echo " - tcltest = Runs test/veryquick.test"; \ echo " - testrunner = Like tcltest but spread across multiple cores"; \ echo " - fuzztest = The core fuzz tester (see target docs for important info)"; \ echo " - valgrindfuzz = Runs fuzztest under valgrind"; \ echo " - soaktest = Really, really long tests"; \ echo " - alltest = Runs most or all TCL tests"; \ echo # Remove build products sufficient so that subsequent makes will recompile # everything from scratch. Do not remove: # # * test results and test logs # * output from ./configure # tidy-.: tidy: tidy-. rm -f *.o *.c *.da *.bb *.bbg gmon.* *.rws sqlite3$(T.exe) rm -f fts5.h keywordhash.h opcodes.h sqlite3.h sqlite3ext.h sqlite3session.h rm -rf .libs .deps tsrc .target_source rm -f lemon$(B.exe) sqlite*.tar.gz rm -f mkkeywordhash$(B.exe) mksourceid$(B.exe) rm -f parse.* fts5parse.* rm -f $(libsqlite3.SO) $(libsqlite3.LIB) $(libtclsqlite3.SO) rm -f tclsqlite3$(T.exe) $(TESTPROGS) rm -f LogEst$(T.exe) fts3view$(T.exe) rollback-test$(T.exe) showdb$(T.exe) rm -f showjournal$(T.exe) showstat4$(T.exe) showwal$(T.exe) speedtest1$(T.exe) rm -f wordcount$(T.exe) changeset$(T.exe) version-info$(T.exe) rm -f *.exp *.vsix pkgIndex.tcl rm -f sqlite3_analyzer$(T.exe) sqlite3_rsync$(T.exe) sqlite3_expert$(T.exe) rm -f mptester$(T.exe) rbu$(T.exe) srcck1$(T.exe) rm -f fuzzershell$(T.exe) fuzzcheck$(T.exe) sqldiff$(T.exe) dbhash$(T.exe) rm -f dbfuzz$(T.exe) dbfuzz2$(T.exe) rm -fr dbfuzz2-dir rm -f fuzzcheck-asan$(T.exe) fuzzcheck-ubsan$(T.exe) ossshell$(T.exe) rm -f scrub$(T.exe) showshm$(T.exe) sqlite3_checker$(T.exe) loadfts$(T.exe) rm -f index_usage$(T.exe) kvtest$(T.exe) startup$(T.exe) threadtest3$(T.exe) rm -f sessionfuzz$(T.exe) changesetfuzz$(T.exe) rm -f dbdump$(T.exe) dbtotxt$(T.exe) atrc$(T.exe) rm -f threadtest5$(T.exe) rm -f src-verify$(B.exe) rm -f tclsqlite3.c has_tclsh* $(T.tcl.env.sh) rm -f sqlite3rc.h sqlite3.def # # Removes build products and test logs. Retains ./configure outputs. # clean-.: clean: clean-. tidy rm -rf omittest* testrunner* testdir* # Clean up everything. No exceptions. distclean-.: distclean: distclean-. clean # Show important variable settings. show-variables: @echo "CC = $(CC)" @echo "B.cc = $(B.cc)" @echo "T.cc = $(T.cc)" @echo "T.cc.sqlite = $(T.cc.sqlite)"