make/common/NativeCompilation.gmk - master - niceSOFT/openjdk21

make/common/NativeCompilation.gmk
1 318 строк57 KB
SendaoYan
8313374: --enable-ccache's CCACHE_BASEDIR breaks builds
30 окт 2024, 10:20
30 окт 2024, 10:20c37acdb
#
# Copyright (c) 2011, 2022, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#

# When you read this source. Remember that $(sort ...) has the side effect
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!

ifndef _NATIVE_COMPILATION_GMK
_NATIVE_COMPILATION_GMK := 1

ifeq ($(_MAKEBASE_GMK), )
  $(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)
endif

################################################################################
# Create exported symbols file for static libraries
################################################################################

# get the exported symbols from mapfiles and if there
# is no mapfile, get them from the archive
define GetSymbols
  $(RM) $$(@D)/$$(basename $$(@F)).symbols; \
  if [ ! -z $$($1_MAPFILE) -a -e $$($1_MAPFILE) ]; then \
    $(ECHO) "Getting symbols from mapfile $$($1_MAPFILE)"; \
    $(AWK) '/global:/','/local:/' $$($1_MAPFILE) | \
        $(SED) -e 's/#.*//;s/global://;s/local://;s/\;//;s/^[ 	]*/_/;/^_$$$$/d' | \
        $(EGREP) -v "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" > \
        $$(@D)/$$(basename $$(@F)).symbols || true; \
    $(NM) $(NMFLAGS) $$($1_TARGET) | $(GREP)  " T " | \
        $(EGREP) "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" | \
        $(CUT) -d ' ' -f 3 >>  $$(@D)/$$(basename $$(@F)).symbols || true;\
  else \
    $(ECHO) "Getting symbols from nm"; \
    $(NM) $(NMFLAGS) -m $$($1_TARGET) | $(GREP)  "__TEXT" | \
        $(EGREP) -v "non-external|private extern|__TEXT,__eh_frame" | \
        $(SED) -e  's/.* //' > $$(@D)/$$(basename $$(@F)).symbols; \
  fi
endef

################################################################################
# Creates a recipe that creates a compile_commands.json fragment. Remove any
# occurrences of FIXPATH programs from the command to show the actual invocation.
#
# Param 1: Name of file to create
# Param 2: Working directory
# Param 3: Source file
# Param 4: Compile command
################################################################################
define WriteCompileCommandsFragment
  $(call LogInfo, Creating compile commands fragment for $(notdir $3))
  $(call MakeDir, $(dir $1))
  $(call WriteFile,{ \
      "directory": "$(strip $(call FixPath, $2))"$(COMMA) \
      "file": "$(strip $(call FixPath, $3))"$(COMMA) \
      "command": "$(strip $(subst $(DQUOTE),\$(DQUOTE),$(subst \,\\,\
        $(subst $(FIXPATH),,$(call FixPath, $4)))))" \
    }$(COMMA), \
    $1)
endef

################################################################################
# Define a native toolchain configuration that can be used by
# SetupNativeCompilation calls
#
# Parameter 1 is the name of the toolchain definition
#
# Remaining parameters are named arguments:
#   EXTENDS - Optional parent definition to get defaults from
#   CC - The C compiler
#   CXX - The C++ compiler
#   LD - The Linker
#   AR - Static linker
#   AS - Assembler
#   MT - Windows MT tool
#   RC - Windows RC tool
#   OBJCOPY - The objcopy tool for debug symbol handling
#   STRIP - The tool to use for stripping debug symbols
#   SYSROOT_CFLAGS - Compiler flags for using the specific sysroot
#   SYSROOT_LDFLAGS - Linker flags for using the specific sysroot
DefineNativeToolchain = $(NamedParamsMacroTemplate)
define DefineNativeToolchainBody
  # If extending another definition, get default values from that,
  # otherwise, nothing more needs to be done as variable assignments
  # already happened in NamedParamsMacroTemplate.
  ifneq ($$($1_EXTENDS), )
    $$(call SetIfEmpty, $1_CC, $$($$($1_EXTENDS)_CC))
    $$(call SetIfEmpty, $1_CXX, $$($$($1_EXTENDS)_CXX))
    $$(call SetIfEmpty, $1_LD, $$($$($1_EXTENDS)_LD))
    $$(call SetIfEmpty, $1_AR, $$($$($1_EXTENDS)_AR))
    $$(call SetIfEmpty, $1_AS, $$($$($1_EXTENDS)_AS))
    $$(call SetIfEmpty, $1_MT, $$($$($1_EXTENDS)_MT))
    $$(call SetIfEmpty, $1_RC, $$($$($1_EXTENDS)_RC))
    $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_EXTENDS)_OBJCOPY))
    $$(call SetIfEmpty, $1_STRIP, $$($$($1_EXTENDS)_STRIP))
    $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_EXTENDS)_SYSROOT_CFLAGS))
    $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_EXTENDS)_SYSROOT_LDFLAGS))
  endif
endef

# Create a default toolchain with the main compiler and linker
$(eval $(call DefineNativeToolchain, TOOLCHAIN_DEFAULT, \
    CC := $(CC), \
    CXX := $(CXX), \
    LD := $(LD), \
    AR := $(AR), \
    AS := $(AS), \
    MT := $(MT), \
    RC := $(RC), \
    OBJCOPY := $(OBJCOPY), \
    STRIP := $(STRIP), \
    SYSROOT_CFLAGS := $(SYSROOT_CFLAGS), \
    SYSROOT_LDFLAGS := $(SYSROOT_LDFLAGS), \
))

# Create a toolchain where linking is done with the C++ linker
$(eval $(call DefineNativeToolchain, TOOLCHAIN_LINK_CXX, \
    EXTENDS := TOOLCHAIN_DEFAULT, \
    LD := $(LDCXX), \
))

# Create a toolchain with the BUILD compiler, used for build tools that
# are to be run during the build.
$(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD, \
    CC := $(BUILD_CC), \
    CXX := $(BUILD_CXX), \
    LD := $(BUILD_LD), \
    AR := $(BUILD_AR), \
    AS := $(BUILD_AS), \
    OBJCOPY := $(BUILD_OBJCOPY), \
    STRIP := $(BUILD_STRIP), \
    SYSROOT_CFLAGS := $(BUILD_SYSROOT_CFLAGS), \
    SYSROOT_LDFLAGS := $(BUILD_SYSROOT_LDFLAGS), \
))

# BUILD toolchain with the C++ linker
$(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD_LINK_CXX, \
    EXTENDS := TOOLCHAIN_BUILD, \
    LD := $(BUILD_LDCXX), \
))

################################################################################

# Extensions of files handled by this macro.
NATIVE_SOURCE_EXTENSIONS := %.S %.c %.cpp %.cc %.m %.mm

# Replaces native source extensions with the object file extension in a string.
# Param 1: the string containing source file names with extensions
# The surrounding strip is needed to keep additional whitespace out
define replace_with_obj_extension
$(strip \
  $(foreach extension, $(NATIVE_SOURCE_EXTENSIONS), \
      $(patsubst $(extension),%$(OBJ_SUFFIX), $(filter $(extension), $1))) \
)
endef

# This pattern is used to transform the output of the microsoft CL compiler
# into a make syntax dependency file (.d)
WINDOWS_SHOWINCLUDE_SED_PATTERN := \
    -e '/^Note: including file:/!d' \
    -e 's|Note: including file: *||' \
    -e 's|\r||g' \
    -e 's|\\|/|g' \
    -e 's|^\([a-zA-Z]\):|$(WINENV_PREFIX)/\1|g' \
    -e '\|$(TOPDIR)|I !d' \
    -e 's|$$$$| \\|g' \
    #

# This pattern is used to transform a dependency file (.d) to a list
# of make targets for dependent files (.d.targets)
DEPENDENCY_TARGET_SED_PATTERN := \
    -e 's/\#.*//' \
    -e 's/^[^:]*: *//' \
    -e 's/ *\\$$$$//' \
    -e 's/^[	 ]*//' \
    -e '/^$$$$/ d' \
    -e 's/$$$$/ :/' \
    #

################################################################################
# When absolute paths are not allowed in the output, and the compiler does not
# support any options to avoid it, we need to rewrite compile commands to use
# relative paths. By doing this, the __FILE__ macro will resolve to relative
# paths. The relevant input paths on the command line are the -I flags and the
# path to the source file itself.
#
# The macro MakeCommandRelative is used to rewrite the command line like this:
# 'CD $(WORKSPACE_ROOT) && <cmd>'
# and changes all paths in cmd to be relative to the workspace root. This only
# works properly if the build dir is inside the workspace root. If it's not,
# relative paths are still calculated, but depending on the distance between the
# dirs, paths in the build dir may end up as essentially absolute anyway.
#
# The fix-deps-file macro is used to adjust the contents of the generated make
# dependency files to contain paths compatible with make.
#
REWRITE_PATHS_RELATIVE = false
ifeq ($(ALLOW_ABSOLUTE_PATHS_IN_OUTPUT)-$(FILE_MACRO_CFLAGS), false-)
  REWRITE_PATHS_RELATIVE = true
endif

# CCACHE_BASEDIR needs fix-deps-file as makefiles use absolute filenames for
# object files while CCACHE_BASEDIR will make ccache relativize all paths for
# its compiler. The compiler then produces relative dependency files.
# make does not know a relative and absolute filename is the same so it will
# ignore such dependencies.
ifneq ($(CCACHE), )
  REWRITE_PATHS_RELATIVE = true
endif

ifeq ($(REWRITE_PATHS_RELATIVE), true)
  # Need to handle -I flags as both '-Ifoo' and '-I foo'.
  MakeCommandRelative = \
      $(CD) $(WORKSPACE_ROOT) && \
      $(foreach o, $1, \
        $(if $(filter $(WORKSPACE_ROOT)/% $(OUTPUTDIR)/%, $o), \
          $(call RelativePath, $o, $(WORKSPACE_ROOT)) \
        , \
          $(if $(filter -I$(WORKSPACE_ROOT)/%, $o), \
            -I$(call RelativePath, $(patsubst -I%, %, $o), $(WORKSPACE_ROOT)) \
          , \
            $o \
          ) \
        ) \
      )

  # When compiling with relative paths, the deps file may come out with relative
  # paths, and that path may start with './'. First remove any leading ./, then
  # add WORKSPACE_ROOT to any line not starting with /, while allowing for
  # leading spaces. There may also be multiple entries on the same line, so start
  # with splitting such lines.
  # Non GNU sed (BSD on macosx) cannot substitute in literal \n using regex.
  # Instead use a bash escaped literal newline. To avoid having unmatched quotes
  # ruin the ability for an editor to properly syntax highlight this file, define
  # that newline sequence as a separate variable and add the closing quote behind
  # a comment.
  sed_newline := \'$$'\n''#'
  define fix-deps-file
	$(SED) \
	    -e 's|\([^ ]\) \{1,\}\([^\\:]\)|\1 \\$(sed_newline) \2|g' \
	    $1.tmp \
	    | $(SED) \
	        -e 's|^\([ ]*\)\./|\1|' \
	        -e '/^[ ]*[^/ ]/s|^\([ ]*\)|\1$(WORKSPACE_ROOT)/|' \
	        > $1
  endef
else
  # By default the MakeCommandRelative macro does nothing.
  MakeCommandRelative = $1

  # No adjustment is needed.
  define fix-deps-file
	$(MV) $1.tmp $1
  endef
endif

################################################################################
# GetEntitlementsFile
# Find entitlements file for executable when signing on macosx. If no
# specialized file is found, returns the default file.
# $1 Executable to find entitlements file for.
ENTITLEMENTS_DIR := $(TOPDIR)/make/data/macosxsigning
ifeq ($(MACOSX_CODESIGN_MODE), debug)
  CODESIGN_PLIST_SUFFIX := -debug
else
  CODESIGN_PLIST_SUFFIX :=
endif
DEFAULT_ENTITLEMENTS_FILE := $(ENTITLEMENTS_DIR)/default$(CODESIGN_PLIST_SUFFIX).plist

GetEntitlementsFile = \
    $(foreach f, $(ENTITLEMENTS_DIR)/$(strip $(notdir $1))$(CODESIGN_PLIST_SUFFIX).plist, \
      $(if $(wildcard $f), $f, $(DEFAULT_ENTITLEMENTS_FILE)) \
    )

################################################################################
# Create the recipe needed to compile a single native source file.
#
# Parameter 1 is the name of the rule, based on the name of the library/
# program being build and the name of the source code file, e.g.
# BUILD_LIBFOO_fooMain.cpp.
#
# Remaining parameters are named arguments:
#   FILE - The full path of the source file to compiler
#   BASE - The name of the rule for the entire binary to build ($1)
#
SetupCompileNativeFile = $(NamedParamsMacroTemplate)
define SetupCompileNativeFileBody
  $1_FILENAME := $$(notdir $$($1_FILE))

  # The target file to be generated.
  $1_OBJ := $$($$($1_BASE)_OBJECT_DIR)/$$(call replace_with_obj_extension, \
      $$($1_FILENAME))

  # Generate the corresponding compile_commands.json fragment.
  $1_OBJ_JSON = $$(MAKESUPPORT_OUTPUTDIR)/compile-commands/$$(subst /,_,$$(subst \
      $$(OUTPUTDIR)/,,$$($1_OBJ))).json
  $$($1_BASE)_ALL_OBJS_JSON += $$($1_OBJ_JSON)

  # Only continue if this object file hasn't been processed already. This lets
  # the first found source file override any other with the same name.
  ifeq ($$($1_OBJ_PROCESSED), )
    $1_OBJ_PROCESSED := true
    # This is the definite source file to use for $1_FILENAME.
    $1_SRC_FILE := $$($1_FILE)

    ifeq ($$($1_OPTIMIZATION), )
      $1_OPT_CFLAGS := $$($$($1_BASE)_OPT_CFLAGS)
      $1_OPT_CXXFLAGS := $$($$($1_BASE)_OPT_CXXFLAGS)
    else
      ifeq ($$($1_OPTIMIZATION), NONE)
        $1_OPT_CFLAGS := $(C_O_FLAG_NONE)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NONE)
      else ifeq ($$($1_OPTIMIZATION), LOW)
        $1_OPT_CFLAGS := $(C_O_FLAG_NORM)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NORM)
      else ifeq ($$($1_OPTIMIZATION), HIGH)
        $1_OPT_CFLAGS := $(C_O_FLAG_HI)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HI)
      else ifeq ($$($1_OPTIMIZATION), HIGHEST)
        $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST)
      else ifeq ($$($1_OPTIMIZATION), HIGHEST_JVM)
        $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST_JVM)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST_JVM)
      else ifeq ($$($1_OPTIMIZATION), SIZE)
        $1_OPT_CFLAGS := $(C_O_FLAG_SIZE)
        $1_OPT_CXXFLAGS := $(CXX_O_FLAG_SIZE)
      else
        $$(error Unknown value for file OPTIMIZATION: $$($1_OPTIMIZATION))
      endif
    endif

    ifneq ($$($$($1_BASE)_PRECOMPILED_HEADER), )
      ifeq ($$(filter $$($1_FILENAME), $$($$($1_BASE)_PRECOMPILED_HEADER_EXCLUDE)), )
        $1_USE_PCH_FLAGS := $$($$($1_BASE)_USE_PCH_FLAGS)
      endif
    endif

    ifneq ($(DISABLE_WARNING_PREFIX), )
      $1_WARNINGS_FLAGS := $$(addprefix $(DISABLE_WARNING_PREFIX), \
        $$($$($1_BASE)_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)_$$($1_FILENAME)) \
        $$($$($1_BASE)_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS)_$$($1_FILENAME)))
    endif

    $1_BASE_CFLAGS :=  $$($$($1_BASE)_CFLAGS) $$($$($1_BASE)_EXTRA_CFLAGS) \
        $$($$($1_BASE)_SYSROOT_CFLAGS)
    $1_BASE_CXXFLAGS := $$($$($1_BASE)_CXXFLAGS) $$($$($1_BASE)_EXTRA_CXXFLAGS) \
        $$($$($1_BASE)_SYSROOT_CFLAGS) $$($1_EXTRA_CXXFLAGS)
    $1_BASE_ASFLAGS := $$($$($1_BASE)_ASFLAGS) $$($$($1_BASE)_EXTRA_ASFLAGS)

    ifneq ($$(filter %.c, $$($1_FILENAME)), )
      # Compile as a C file
      $1_CFLAGS += $$($1_WARNINGS_FLAGS)
      $1_FLAGS := $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) $$($1_BASE_CFLAGS) \
          $$($1_OPT_CFLAGS) $$($1_CFLAGS) -c
      $1_COMPILER := $$($$($1_BASE)_CC)
    else ifneq ($$(filter %.m, $$($1_FILENAME)), )
      # Compile as an Objective-C file
      $1_CFLAGS += $$($1_WARNINGS_FLAGS)
      $1_FLAGS := -x objective-c $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) \
          $$($1_BASE_CFLAGS) $$($1_OPT_CFLAGS) $$($1_CFLAGS) -c
      $1_COMPILER := $$($$($1_BASE)_CC)
    else ifneq ($$(filter %.S, $$($1_FILENAME)), )
      # Compile as preprocessed assembler file
      $1_FLAGS := $(BASIC_ASFLAGS) $$($1_BASE_ASFLAGS)
      $1_COMPILER := $(AS)

      # gcc or clang assembly files must contain an appropriate relative .file
      # path for reproducible builds.
      ifneq ($(findstring $(TOOLCHAIN_TYPE), gcc clang), )
        # If no absolute paths allowed, work out relative source file path
        # for assembly .file substitution, otherwise use full file path
        ifeq ($(ALLOW_ABSOLUTE_PATHS_IN_OUTPUT), false)
          $1_REL_ASM_SRC := $$(call RelativePath, $$($1_FILE), $(WORKSPACE_ROOT))
        else
          $1_REL_ASM_SRC := $$($1_FILE)
        endif
        $1_FLAGS := $$($1_FLAGS) -DASSEMBLY_SRC_FILE='"$$($1_REL_ASM_SRC)"' \
            -include $(TOPDIR)/make/data/autoheaders/assemblyprefix.h
      endif
    else ifneq ($$(filter %.cpp %.cc %.mm, $$($1_FILENAME)), )
      # Compile as a C++ or Objective-C++ file
      $1_CXXFLAGS += $$($1_WARNINGS_FLAGS)
      $1_FLAGS := $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) $$($1_BASE_CXXFLAGS) \
          $$($1_OPT_CXXFLAGS) $$($1_CXXFLAGS) -c
      $1_COMPILER := $$($$($1_BASE)_CXX)
    else
      $$(error Internal error in NativeCompilation.gmk: no compiler for file $$($1_FILENAME))
    endif

    # And this is the dependency file for this obj file.
    $1_DEPS_FILE := $$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_OBJ))
    # The dependency target file lists all dependencies as empty targets to
    # avoid make error "No rule to make target" for removed files
    $1_DEPS_TARGETS_FILE := $$(patsubst %$(OBJ_SUFFIX),%.d.targets,$$($1_OBJ))

    # Only try to load individual dependency information files if the global
    # file hasn't been loaded (could happen if make was interrupted).
    ifneq ($$($$($1_BASE)_DEPS_FILE_LOADED), true)
      # Include previously generated dependency information. (if it exists)
      -include $$($1_DEPS_FILE)
      -include $$($1_DEPS_TARGETS_FILE)
    endif

    ifneq ($$(strip $$($1_CFLAGS) $$($1_CXXFLAGS) $$($1_OPTIMIZATION)), )
      $1_VARDEPS := $$($1_CFLAGS) $$($1_CXXFLAGS) $$($1_OPTIMIZATION)
      $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, $$($1_OBJ).vardeps)
    endif

    $1_OBJ_DEPS := $$($1_SRC_FILE) $$($$($1_BASE)_COMPILE_VARDEPS_FILE) \
        $$($$($1_BASE)_EXTRA_DEPS) $$($1_VARDEPS_FILE)
    $1_COMPILE_OPTIONS := $$($1_FLAGS) $(CC_OUT_OPTION)$$($1_OBJ) $$($1_SRC_FILE)
    # For reproducible builds with gcc and clang ensure random symbol generation is
    # seeded deterministically
    ifneq ($(findstring $(TOOLCHAIN_TYPE), gcc clang), )
      $1_COMPILE_OPTIONS += -frandom-seed="$$($1_FILENAME)"
    endif

    $$($1_OBJ_JSON): $$($1_OBJ_DEPS)
	$$(call WriteCompileCommandsFragment, $$@, $$(PWD), $$($1_SRC_FILE), \
	    $$($1_COMPILER) $$($1_COMPILE_OPTIONS))

    $$($1_OBJ): $$($1_OBJ_DEPS) | $$($$($1_BASE)_BUILD_INFO)
	$$(call LogInfo, Compiling $$($1_FILENAME) (for $$($$($1_BASE)_BASENAME)))
	$$(call MakeDir, $$(@D))
        ifneq ($(TOOLCHAIN_TYPE), microsoft)
	  $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \
	      $$($1_COMPILER) $$(GENDEPS_FLAGS) \
	      $$(addsuffix .tmp, $$($1_DEPS_FILE)) \
	      $$($1_COMPILE_OPTIONS)))
          ifneq ($$($1_DEPS_FILE), )
	    $$(call fix-deps-file, $$($1_DEPS_FILE))
            # Create a dependency target file from the dependency file.
            # Solution suggested by:
            # http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/
	    $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_DEPS_FILE) \
	        > $$($1_DEPS_TARGETS_FILE)
          endif
        else
          # The Visual Studio compiler lacks a feature for generating make
          # dependencies, but by setting -showIncludes, all included files are
          # printed. These are filtered out and parsed into make dependences.
          #
          # Keep as much as possible on one execution line for best performance
          # on Windows. No need to save exit code from compilation since
          # pipefail is always active on Windows.
          ifeq ($$(filter %.S, $$($1_FILENAME)), )
	    $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \
	        $$($1_COMPILER) -showIncludes $$($1_COMPILE_OPTIONS))) \
	        | $(TR) -d '\r' | $(GREP) -v -e "^Note: including file:" \
	            -e "^$$($1_FILENAME)$$$$" || test "$$$$?" = "1" ; \
	    $(ECHO) $$@: \\ > $$($1_DEPS_FILE) ; \
	    $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_OBJ).log \
	        | $(SORT) -u >> $$($1_DEPS_FILE) ; \
	    $(ECHO) >> $$($1_DEPS_FILE) ; \
	    $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_DEPS_FILE) > $$($1_DEPS_TARGETS_FILE)
          else
            # For assembler calls just create empty dependency lists
	    $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \
	        $$($1_COMPILER) $$($1_FLAGS) \
	        $(CC_OUT_OPTION)$$($1_OBJ) -Ta $$($1_SRC_FILE))) \
	        | $(TR) -d '\r' | $(GREP) -v -e "Assembling:" || test "$$$$?" = "1" ; \
	    $(ECHO) > $$($1_DEPS_FILE) ; \
	    $(ECHO) > $$($1_DEPS_TARGETS_FILE)
          endif
        endif
  endif
endef

# Setup make rules for creating a native binary (a shared library or an
# executable).
#
# Parameter 1 is the name of the rule. This name is used as variable prefix,
# and the targets generated are listed in a variable by that name.
#
# Remaining parameters are named arguments. These include:
#   NAME The base name for the resulting binary, excluding decorations (like *.exe)
#   TYPE Type of binary (EXECUTABLE, LIBRARY or STATIC_LIBRARY). Default is LIBRARY.
#   SUFFIX Override the default suffix for the output file
#   TOOLCHAIN Name of toolchain setup to use. Defaults to TOOLCHAIN_DEFAULT.
#   SRC one or more directory roots to scan for C/C++ files.
#   CFLAGS the compiler flags to be used, used both for C and C++.
#   CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.
#   LDFLAGS the linker flags to be used, used both for C and C++.
#   LDFLAGS_<toolchain> the linker flags to be used for the specified toolchain,
#       used both for C and C++.
#   LDFLAGS_<OS> the linker flags to be used for the specified target OS,
#       used both for C and C++.
#   LDFLAGS_<toolchain>_<OS> the linker flags to be used for the specified
#       toolchain and target OS, used both for C and C++.
#   LIBS the libraries to link to
#   LIBS_<OS> the libraries to link to for the specified target OS,
#       used both for C and C++.
#   LIBS_<toolchain> the libraries to link to for the specified toolchain,
#       used both for C and C++.
#   LIBS_<OS>_<toolchain> the libraries to link to for the specified target
#       OS and toolchain, used both for C and C++.
#   ARFLAGS the archiver flags to be used
#   OBJECT_DIR the directory where we store the object files
#   OUTPUT_DIR the directory where the resulting binary is put
#   SYMBOLS_DIR the directory where the debug symbols are put, defaults to OUTPUT_DIR
#   INCLUDES only pick source from these directories
#   EXCLUDES do not pick source from these directories
#   INCLUDE_FILES only compile exactly these files!
#   EXCLUDE_FILES with these names
#   EXCLUDE_PATTERN exclude files matching any of these substrings
#   EXTRA_FILES List of extra files not in any of the SRC dirs
#   EXTRA_OBJECT_FILES List of extra object files to include when linking
#   EXTRA_DEPS List of extra dependencies to be added to each compiled file
#   VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run
#   RCFLAGS flags for RC.
#   EMBED_MANIFEST if true, embed manifest on Windows.
#   MAPFILE mapfile
#   USE_MAPFILE_FOR_SYMBOLS if true and this is a STATIC_BUILD, just copy the
#       mapfile for the output symbols file
#   CC the compiler to use, default is $(CC)
#   LD the linker to use, default is $(LD)
#   OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST, HIGHEST_JVM, SIZE
#   DISABLED_WARNINGS_<toolchain> Disable the given warnings for the specified toolchain
#   DISABLED_WARNINGS_<toolchain>_<OS> Disable the given warnings for the specified
#       toolchain and target OS
#   DISABLED_WARNINGS_C_<toolchain> Disable the given warnings for the specified toolchain
#       when compiling C code
#   DISABLED_WARNINGS_C_<toolchain>_<OS> Disable the given warnings for the specified
#       toolchain and target OS when compiling C code
#   DISABLED_WARNINGS_CXX_<toolchain> Disable the given warnings for the specified
#       toolchain when compiling C++ code
#   DISABLED_WARNINGS_CXX_<toolchain>_<OS> Disable the given warnings for the specified
#       toolchain and target OS when compiling C++ code
#   DISABLED_WARNINGS_<toolchain>_<filename> Disable the given warnings for the specified
#       toolchain when compiling the file specified by filename
#   DISABLED_WARNINGS_<toolchain>_<OS>_<filename> Disable the given warnings for the specified
#       toolchain and target OS when compiling the file specified by filename
#   STRIP_SYMBOLS Set to false to override global strip policy and always leave
#       symbols in the binary, if the toolchain allows for it
#   DEBUG_SYMBOLS Set to false to disable generation of debug symbols
#   COPY_DEBUG_SYMBOLS Set to false to override global setting of debug symbol copying
#   ZIP_EXTERNAL_DEBUG_SYMBOLS Set to false to override global setting of debug symbol
#       zipping
#   STRIPFLAGS Optionally change the flags given to the strip command
#   PRECOMPILED_HEADER Header file to use as precompiled header
#   PRECOMPILED_HEADER_EXCLUDE List of source files that should not use PCH
#   BUILD_INFO_LOG_MACRO Overrides log level of the build info log message, default LogWarn
#
# After being called, some variables are exported from this macro, all prefixed
# with parameter 1 followed by a '_':
#   TARGET The library or executable created by the macro
#   TARGET_DEPS All prerequisites for the target calculated by the macro
#   ALL_OBJS All object files
#   IMPORT_LIBRARY The import library created for a shared library on Windows
SetupNativeCompilation = $(NamedParamsMacroTemplate)
define SetupNativeCompilationBody

  # If type is unspecified, default to LIBRARY
  ifeq ($$($1_TYPE), )
    $1_TYPE := LIBRARY
  endif

  # If we're doing a static build and producing a library
  # force it to be a static library and remove the -l libraries
  ifeq ($(STATIC_BUILD), true)
    ifeq ($$($1_TYPE), LIBRARY)
      $1_TYPE := STATIC_LIBRARY
    endif
  endif

  $$(call SetIfEmpty, $1_COMPILE_WITH_DEBUG_SYMBOLS, $$(COMPILE_WITH_DEBUG_SYMBOLS))

  # STATIC_LIBS is set from Main.gmk when building static versions of certain
  # native libraries.
  ifeq ($(STATIC_LIBS), true)
    $1_TYPE := STATIC_LIBRARY
    # The static versions need to be redirected to different output dirs, both
    # to not interfere with the main build as well as to not end up inside the
    # jmods.
    $1_OBJECT_DIR := $$($1_OBJECT_DIR)/static
    $1_OUTPUT_DIR := $$($1_OBJECT_DIR)
    # For release builds where debug symbols are configured to be moved to
    # separate debuginfo files, disable debug symbols for static libs instead.
    # We don't currently support this configuration and we don't want symbol
    # information in release builds unless explicitly asked to provide it.
    ifeq ($(DEBUG_LEVEL), release)
      ifeq ($(COPY_DEBUG_SYMBOLS), true)
        $1_COMPILE_WITH_DEBUG_SYMBOLS := false
      endif
    endif
  endif

  ifeq ($$($1_TYPE), EXECUTABLE)
    $1_PREFIX :=
    ifeq ($$($1_SUFFIX), )
      $1_SUFFIX := $(EXECUTABLE_SUFFIX)
    endif
  else
    $1_PREFIX := $(LIBRARY_PREFIX)
    ifeq ($$($1_TYPE), LIBRARY)
      ifeq ($$($1_SUFFIX), )
        $1_SUFFIX := $(SHARED_LIBRARY_SUFFIX)
      endif
    else ifeq ($$($1_TYPE), STATIC_LIBRARY)
      ifeq ($$($1_SUFFIX), )
        $1_SUFFIX := $(STATIC_LIBRARY_SUFFIX)
      endif
    endif
  endif

  ifneq ($$($1_NAME), $(basename $$($1_NAME)))
    $$(error NAME must not contain any directory path in $1)
  endif
  ifneq ($(findstring $$($1_SUFFIX), $$($1_NAME)), )
    $$(error NAME should be specified without suffix: $$($1_SUFFIX) in $1)
  endif
  ifneq ($(findstring $$($1_PREFIX), $$($1_NAME)), )
    $$(error NAME should be specified without prefix: $$($1_PREFIX) in $1)
  endif
  ifeq ($$($1_OUTPUT_DIR), )
    $$(error OUTPUT_DIR is missing in $1)
  endif
  ifneq ($$($1_MANIFEST), )
    ifeq ($$($1_MANIFEST_VERSION), )
      $$(error If MANIFEST is provided, then MANIFEST_VERSION is required in $1)
    endif
  endif

  $1_BASENAME := $$($1_PREFIX)$$($1_NAME)$$($1_SUFFIX)
  $1_TARGET := $$($1_OUTPUT_DIR)/$$($1_BASENAME)
  $1_NOSUFFIX := $$($1_PREFIX)$$($1_NAME)
  $1_SAFE_NAME := $$(strip $$(subst /,_, $1))

# Need to make sure TARGET is first on list
  $1 := $$($1_TARGET)

  # Setup the toolchain to be used
  $$(call SetIfEmpty, $1_TOOLCHAIN, TOOLCHAIN_DEFAULT)
  $$(call SetIfEmpty, $1_CC, $$($$($1_TOOLCHAIN)_CC))
  $$(call SetIfEmpty, $1_CXX, $$($$($1_TOOLCHAIN)_CXX))
  $$(call SetIfEmpty, $1_LD, $$($$($1_TOOLCHAIN)_LD))
  $$(call SetIfEmpty, $1_AR, $$($$($1_TOOLCHAIN)_AR))
  $$(call SetIfEmpty, $1_AS, $$($$($1_TOOLCHAIN)_AS))
  $$(call SetIfEmpty, $1_MT, $$($$($1_TOOLCHAIN)_MT))
  $$(call SetIfEmpty, $1_RC, $$($$($1_TOOLCHAIN)_RC))
  $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_TOOLCHAIN)_OBJCOPY))
  $$(call SetIfEmpty, $1_STRIP, $$($$($1_TOOLCHAIN)_STRIP))
  $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_CFLAGS))
  $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_LDFLAGS))

  $$(foreach d, $$($1_SRC), $$(if $$(wildcard $$d), , \
      $$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))

  $1_SRCS_RAW := $$(call FindFiles, $$($1_SRC))
  # Order src files according to the order of the src dirs
  $1_SRCS := $$(foreach d, $$($1_SRC), $$(filter $$d%, $$($1_SRCS_RAW)))
  $1_SRCS := $$(filter $$(NATIVE_SOURCE_EXTENSIONS), $$($1_SRCS))
  # Extract the C/C++ files.
  ifneq ($$($1_EXCLUDE_PATTERNS), )
    # We must not match the exclude pattern against the src root(s).
    $1_SRCS_WITHOUT_ROOTS := $$($1_SRCS)
    $$(foreach i, $$($1_SRC), $$(eval $1_SRCS_WITHOUT_ROOTS := $$(patsubst \
        $$i/%,%, $$($1_SRCS_WITHOUT_ROOTS))))
    $1_ALL_EXCLUDE_FILES :=  $$(call containing, $$($1_EXCLUDE_PATTERNS), \
        $$($1_SRCS_WITHOUT_ROOTS))
  endif
  ifneq ($$($1_EXCLUDE_FILES), )
    $1_ALL_EXCLUDE_FILES += $$($1_EXCLUDE_FILES)
  endif
  ifneq ($$($1_ALL_EXCLUDE_FILES), )
    $1_EXCLUDE_FILES_PAT := $$($1_ALL_EXCLUDE_FILES) \
        $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_ALL_EXCLUDE_FILES)))
    $1_EXCLUDE_FILES_PAT := $$(addprefix %, $$($1_EXCLUDE_FILES_PAT))
    $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PAT), $$($1_SRCS))
  endif
  ifneq ($$($1_INCLUDE_FILES), )
    $1_INCLUDE_FILES_PAT := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_INCLUDE_FILES)))
    $1_SRCS := $$(filter $$($1_INCLUDE_FILES_PAT), $$($1_SRCS))
  endif
  # There can be only a single bin dir root, no need to foreach over the roots.
  $1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX))
  # Now we have a list of all c/c++ files to compile: $$($1_SRCS)
  # and we have a list of all existing object files: $$($1_BINS)

  # Prepend the source/bin path to the filter expressions. Then do the filtering.
  ifneq ($$($1_INCLUDES), )
    $1_SRC_INCLUDES := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_INCLUDES))))
    $1_SRCS := $$(filter $$($1_SRC_INCLUDES), $$($1_SRCS))
  endif
  ifneq ($$($1_EXCLUDES), )
    $1_SRC_EXCLUDES := $$(addsuffix /%, $$($1_EXCLUDES))
    $1_SRC_EXCLUDES += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_EXCLUDES))))
    $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES), $$($1_SRCS))
  endif

  $1_SRCS += $$($1_EXTRA_FILES)

  ifeq ($$($1_SRCS), )
    $$(error No sources found for $1 when looking inside the dirs $$($1_SRC))
  endif

  ifeq ($$($1_TYPE), EXECUTABLE)
    ifeq ($(UBSAN_ENABLED), true)
      # We need to set the default options for UBSan. This needs to be included in every executable.
      # Rather than copy and paste code to everything with a main function, we add an additional
      # source file to every executable that exports __ubsan_default_options.
      ifneq ($$(filter %.cpp %.cc, $$($1_SRCS)), )
        $1_SRCS += $(TOPDIR)/make/data/ubsan/ubsan_default_options.cpp
      else
        $1_SRCS += $(TOPDIR)/make/data/ubsan/ubsan_default_options.c
      endif
    endif
  endif

  # Calculate the expected output from compiling the sources
  $1_EXPECTED_OBJS_FILENAMES := $$(call replace_with_obj_extension, $$(notdir $$($1_SRCS)))
  $1_EXPECTED_OBJS := $$(addprefix $$($1_OBJECT_DIR)/, $$($1_EXPECTED_OBJS_FILENAMES))
  # Are there too many object files on disk? Perhaps because some source file was removed?
  $1_SUPERFLOUS_OBJS := $$(sort $$(filter-out $$($1_EXPECTED_OBJS), $$($1_BINS)))
  # Clean out the superfluous object files.
  ifneq ($$($1_SUPERFLUOUS_OBJS), )
    $$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS))
  endif
  # Sort to remove duplicates and provide a reproducible order on the input files to the linker.
  $1_ALL_OBJS := $$(sort $$($1_EXPECTED_OBJS) $$($1_EXTRA_OBJECT_FILES))

  # Pickup extra OPENJDK_TARGET_OS_TYPE, OPENJDK_TARGET_OS, TOOLCHAIN_TYPE and
  # OPENJDK_TARGET_OS plus OPENJDK_TARGET_CPU pair dependent variables for CFLAGS.
  $1_EXTRA_CFLAGS := $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS)) \
      $$($1_CFLAGS_$(TOOLCHAIN_TYPE)) \
      $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU))

  ifneq ($(DEBUG_LEVEL), release)
    # Pickup extra debug dependent variables for CFLAGS
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_debug)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)_debug)
  else
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_release)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
    $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)_release)
  endif
  ifeq ($(STATIC_LIBS), true)
    $1_EXTRA_CFLAGS += $$(STATIC_LIBS_CFLAGS)
  endif

  # Pickup extra OPENJDK_TARGET_OS_TYPE, OPENJDK_TARGET_OS and/or TOOLCHAIN_TYPE
  # dependent variables for CXXFLAGS.
  $1_EXTRA_CXXFLAGS := $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)) \
      $$($1_CXXFLAGS_$(TOOLCHAIN_TYPE))

  ifneq ($(DEBUG_LEVEL), release)
    # Pickup extra debug dependent variables for CXXFLAGS
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_debug)
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug)
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug)
  else
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_release)
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release)
    $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
  endif
  ifeq ($(STATIC_LIBS), true)
    $1_EXTRA_CXXFLAGS += $$(STATIC_LIB_CFLAGS)
  endif

  # If no C++ flags are explicitly set, default to using the C flags.
  # After that, we can set additional C++ flags that should not interfere
  # with the mechanism for copying the C flags by default.
  ifeq ($$($1_CXXFLAGS), )
    $1_CXXFLAGS := $$($1_CFLAGS)
  endif
  ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)), )
    $1_EXTRA_CXXFLAGS := $$($1_EXTRA_CFLAGS)
  endif

  ifeq ($$($1_COMPILE_WITH_DEBUG_SYMBOLS), true)
    $1_EXTRA_CFLAGS += $$(CFLAGS_DEBUG_SYMBOLS)
    $1_EXTRA_CXXFLAGS += $$(CFLAGS_DEBUG_SYMBOLS)
    $1_EXTRA_ASFLAGS += $$(ASFLAGS_DEBUG_SYMBOLS)
  endif

  # Pass the library name for static JNI library naming
  ifeq ($$($1_TYPE), STATIC_LIBRARY)
    $1_EXTRA_CFLAGS += -DLIBRARY_NAME=$$($1_NAME)
    $1_EXTRA_CXXFLAGS += -DLIBRARY_NAME=$$($1_NAME)
  endif

  # Pick up disabled warnings, if possible on this platform.
  ifneq ($(DISABLE_WARNING_PREFIX), )
    $1_EXTRA_CFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), \
        $$(DISABLED_WARNINGS) \
        $$(DISABLED_WARNINGS_C) \
        $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)) \
        $$($1_DISABLED_WARNINGS_C_$(TOOLCHAIN_TYPE)) \
        $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS)) \
        $$($1_DISABLED_WARNINGS_C_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS)))
    $1_EXTRA_CXXFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), \
        $$(DISABLED_WARNINGS) \
        $$(DISABLED_WARNINGS_CXX) \
        $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)) \
        $$($1_DISABLED_WARNINGS_CXX_$(TOOLCHAIN_TYPE)) \
        $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS)) \
        $$($1_DISABLED_WARNINGS_CXX_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS)))
  endif

  # Check if warnings should be considered errors.
  # Pick first binary and toolchain specific, then binary specific, then general setting.
  ifeq ($$($1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE)), )
    ifeq ($$($1_WARNINGS_AS_ERRORS), )
      $1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE) := $$(WARNINGS_AS_ERRORS)
    else
      $1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE) := $$($1_WARNINGS_AS_ERRORS)
    endif
  endif

  ifeq ($$($1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE)), true)
    $1_EXTRA_CFLAGS += $(CFLAGS_WARNINGS_ARE_ERRORS)
    $1_EXTRA_CXXFLAGS += $(CFLAGS_WARNINGS_ARE_ERRORS)
  endif

  ifeq (NONE, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_NONE)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NONE)
  else ifeq (LOW, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_NORM)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NORM)
  else ifeq (HIGH, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_HI)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HI)
  else ifeq (HIGHEST, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST)
  else ifeq (HIGHEST_JVM, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST_JVM)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST_JVM)
  else ifeq (SIZE, $$($1_OPTIMIZATION))
    $1_OPT_CFLAGS := $(C_O_FLAG_SIZE)
    $1_OPT_CXXFLAGS := $(CXX_O_FLAG_SIZE)
  else ifneq (, $$($1_OPTIMIZATION))
    $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
  endif

  $1_BUILD_INFO := $$($1_OBJECT_DIR)/_build-info.marker

  # Track variable changes for all variables that affect the compilation command
  # lines for all object files in this setup. This includes at least all the
  # variables used in the call to add_native_source below.
  $1_COMPILE_VARDEPS := $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $$($1_SYSROOT_CFLAGS) \
      $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) $$($1_OPT_CFLAGS) $$($1_OPT_CXXFLAGS) \
      $$($1_CC) $$($1_CXX) $$($1_AS) $$($1_ASFLAGS)
  $1_COMPILE_VARDEPS_FILE := $$(call DependOnVariable, $1_COMPILE_VARDEPS, \
      $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).comp.vardeps)

  ifneq ($$($1_PRECOMPILED_HEADER), )
    ifeq ($(USE_PRECOMPILED_HEADER), true)
      ifeq ($(TOOLCHAIN_TYPE), microsoft)
        $1_PCH_FILE := $$($1_OBJECT_DIR)/$1.pch
        $1_GENERATED_PCH_SRC := $$($1_OBJECT_DIR)/$1_pch.cpp
        $1_GENERATED_PCH_OBJ := $$($1_OBJECT_DIR)/$1_pch$(OBJ_SUFFIX)

        $$(eval $$(call SetupCompileNativeFile, $1_$$(notdir $$($1_GENERATED_PCH_SRC)), \
            FILE := $$($1_GENERATED_PCH_SRC), \
            BASE := $1, \
            EXTRA_CXXFLAGS := -Fp$$($1_PCH_FILE) -Yc$$(notdir $$($1_PRECOMPILED_HEADER)), \
        ))

        $1_USE_PCH_FLAGS := \
            -Fp$$($1_PCH_FILE) -Yu$$(notdir $$($1_PRECOMPILED_HEADER))

        $$($1_ALL_OBJS): $$($1_GENERATED_PCH_OBJ)

        # Explicitly add the pch obj file first to ease comparing to old
        # hotspot build.
        $1_ALL_OBJS := $$($1_GENERATED_PCH_OBJ) $$($1_ALL_OBJS)

        $$($1_GENERATED_PCH_SRC):
		$(ECHO) "#include \"$$(notdir $$($1_PRECOMPILED_HEADER))\"" > $$@

      else ifneq ($(findstring $(TOOLCHAIN_TYPE), gcc clang), )
        ifeq ($(TOOLCHAIN_TYPE), gcc)
          $1_PCH_FILE := $$($1_OBJECT_DIR)/precompiled/$$(notdir $$($1_PRECOMPILED_HEADER)).gch
          $1_USE_PCH_FLAGS := -I$$($1_OBJECT_DIR)/precompiled
        else ifeq ($(TOOLCHAIN_TYPE), clang)
          $1_PCH_FILE := $$($1_OBJECT_DIR)/precompiled/$$(notdir $$($1_PRECOMPILED_HEADER)).pch
          $1_USE_PCH_FLAGS := -include-pch $$($1_PCH_FILE)
        endif
        $1_PCH_DEPS_FILE := $$($1_PCH_FILE).d
        $1_PCH_DEPS_TARGETS_FILE := $$($1_PCH_FILE).d.targets

        -include $$($1_PCH_DEPS_FILE)
        -include $$($1_PCH_DEPS_TARGETS_FILE)

        $1_PCH_COMMAND := $$($1_CC) $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $$($1_SYSROOT_CFLAGS) \
            $$($1_OPT_CFLAGS) -x c++-header -c $(GENDEPS_FLAGS) \
            $$(addsuffix .tmp, $$($1_PCH_DEPS_FILE))

        $$($1_PCH_FILE): $$($1_PRECOMPILED_HEADER) $$($1_COMPILE_VARDEPS_FILE)
		$$(call LogInfo, Generating precompiled header)
		$$(call MakeDir, $$(@D))
		$$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \
		    $$($1_PCH_COMMAND) $$< -o $$@))
		$$(call fix-deps-file, $$($1_PCH_DEPS_FILE))
		$(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_PCH_DEPS_FILE) \
		    > $$($1_PCH_DEPS_TARGETS_FILE)

        $$($1_ALL_OBJS): $$($1_PCH_FILE)

        # Generate the corresponding compile_commands.json fragment.
        $1_PCH_FILE_JSON := $$(MAKESUPPORT_OUTPUTDIR)/compile-commands/$$(subst /,_,$$(subst \
            $$(OUTPUTDIR)/,,$$($1_PCH_FILE))).json
        $1_ALL_OBJS_JSON += $$($1_PCH_FILE_JSON)

        $$($1_PCH_FILE_JSON): $$($1_PRECOMPILED_HEADER) $$($1_COMPILE_VARDEPS_FILE)
		$$(call WriteCompileCommandsFragment, $$@, $$(PWD), $$<, \
		    $$($1_PCH_COMMAND) $$< -o $$($1_PCH_FILE))
      endif
    endif
  endif

  # Now call SetupCompileNativeFile for each source file we are going to compile.
  $$(foreach file, $$($1_SRCS), \
      $$(eval $$(call SetupCompileNativeFile, $1_$$(notdir $$(file)),\
          FILE := $$(file), \
          BASE := $1, \
      )) \
  )

  # Setup rule for printing progress info when compiling source files.
  # This is a rough heuristic and may not always print accurate information.
  # The $1_BUILD_INFO and $1_BUILD_INFO_DEPS variables are used in
  # TestFilesCompilation.gmk.
  $$(call SetIfEmpty, $1_BUILD_INFO_LOG_MACRO, LogWarn)
  $1_BUILD_INFO_DEPS := $$($1_SRCS) $$($1_COMPILE_VARDEPS_FILE)
  $$($1_BUILD_INFO): $$($1_BUILD_INFO_DEPS)
        ifeq ($$(wildcard $$($1_TARGET)), )
	  $$(call $$($1_BUILD_INFO_LOG_MACRO), \
	      Creating $$(subst $$(OUTPUTDIR)/,,$$($1_TARGET)) from $$(words \
	      $$(filter-out %.vardeps, $$?)) file(s))
        else
	  $$(call $$($1_BUILD_INFO_LOG_MACRO), \
	      $$(strip Updating $$(subst $$(OUTPUTDIR)/,,$$($1_TARGET)) \
	      $$(if $$(filter-out %.vardeps, $$?), \
	        due to $$(words $$(filter-out %.vardeps, $$?)) file(s), \
	      $$(if $$(filter %.vardeps, $$?), due to makefile changes))))
        endif
	$(TOUCH) $$@

  # On windows we need to create a resource file
  ifeq ($(call isTargetOs, windows), true)
    ifneq ($$($1_VERSIONINFO_RESOURCE), )
      $1_RES := $$($1_OBJECT_DIR)/$$($1_BASENAME).res
      $1_RES_DEPS_FILE := $$($1_RES).d
      $1_RES_DEPS_TARGETS_FILE := $$($1_RES).d.targets
      -include $$($1_RES_DEPS_FILE)
      -include $$($1_RES_DEPS_TARGETS_FILE)

      $1_RES_VARDEPS := $$($1_RC) $$($1_RCFLAGS)
      $1_RES_VARDEPS_FILE := $$(call DependOnVariable, $1_RES_VARDEPS, \
          $$($1_RES).vardeps)

      $$($1_RES): $$($1_VERSIONINFO_RESOURCE) $$($1_RES_VARDEPS_FILE)
		$$(call LogInfo, Compiling resource $$(notdir $$($1_VERSIONINFO_RESOURCE)) (for $$($1_BASENAME)))
		$$(call MakeDir, $$(@D) $$($1_OBJECT_DIR))
		$$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \
		    $$($1_RC) $$($1_RCFLAGS) $$($1_SYSROOT_CFLAGS) $(CC_OUT_OPTION)$$@ \
		    $$($1_VERSIONINFO_RESOURCE) 2>&1 ))
                # Windows RC compiler does not support -showIncludes, so we mis-use CL
                # for this. Filter out RC specific arguments that are unknown to CL.
                # For some unknown reason, in this case CL actually outputs the show
                # includes to stderr so need to redirect it to hide the output from the
                # main log.
		$$(call ExecuteWithLog, $$($1_RES_DEPS_FILE)$(OBJ_SUFFIX), \
		    $$($1_CC) $$(filter-out -l%, $$($1_RCFLAGS)) \
		        $$($1_SYSROOT_CFLAGS) -showIncludes -nologo -TC \
		        $(CC_OUT_OPTION)$$($1_RES_DEPS_FILE)$(OBJ_SUFFIX) -P -Fi$$($1_RES_DEPS_FILE).pp \
		        $$($1_VERSIONINFO_RESOURCE)) 2>&1 \
		    | $(TR) -d '\r' | $(GREP) -v -e "^Note: including file:" \
		        -e "^$$(notdir $$($1_VERSIONINFO_RESOURCE))$$$$" || test "$$$$?" = "1" ; \
		$(ECHO) $$($1_RES): \\ > $$($1_RES_DEPS_FILE) ; \
		$(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_RES_DEPS_FILE)$(OBJ_SUFFIX).log \
		    >> $$($1_RES_DEPS_FILE) ; \
		$(ECHO) >> $$($1_RES_DEPS_FILE) ;\
		$(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_RES_DEPS_FILE) \
		    > $$($1_RES_DEPS_TARGETS_FILE)
    endif
  endif

  # Create a rule to collect all the individual make dependency files into a
  # single makefile.
  $1_DEPS_FILE := $$($1_OBJECT_DIR)/$1.d

  $$($1_DEPS_FILE): $$($1_ALL_OBJS) $$($1_RES)
	$(RM) $$@
        # CD into dir to reduce risk of hitting command length limits, which
        # could otherwise happen if TOPDIR is a very long path.
	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d > $$@.tmp
	$(CD) $$($1_OBJECT_DIR) && $(CAT) *.d.targets | $(SORT) -u >> $$@.tmp
        # After generating the file, which happens after all objects have been
        # compiled, copy it to .old extension. On the next make invocation, this
        # .old file will be included by make.
	$(CP) $$@.tmp $$@.old
	$(MV) $$@.tmp $$@

  $1 += $$($1_DEPS_FILE)

  # The include must be on the .old file, which represents the state from the
  # previous invocation of make. The file being included must not have a rule
  # defined for it as otherwise make will think it has to run the rule before
  # being able to include the file, which would be wrong since we specifically
  # need the file as it was generated by a previous make invocation.
  ifneq ($$(wildcard $$($1_DEPS_FILE).old), )
    $1_DEPS_FILE_LOADED := true
    -include $$($1_DEPS_FILE).old
  endif

  ifneq ($(DISABLE_MAPFILES), true)
    $1_REAL_MAPFILE := $$($1_MAPFILE)
  endif

  # Pickup extra OPENJDK_TARGET_OS_TYPE, OPENJDK_TARGET_OS and TOOLCHAIN_TYPE
  # dependent variables for LDFLAGS and LIBS, and additionally the pair dependent
  # TOOLCHAIN_TYPE plus OPENJDK_TARGET_OS for LDFLAGS, or OPENJDK_TARGET_OS plus
  # TOOLCHAIN_TYPE for LIBS
  $1_EXTRA_LDFLAGS += $$($1_LDFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS)) \
      $$($1_LDFLAGS_$(TOOLCHAIN_TYPE)) $$($1_LDFLAGS_$(TOOLCHAIN_TYPE)_$(OPENJDK_TARGET_OS))
  $1_EXTRA_LIBS += $$($1_LIBS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LIBS_$(OPENJDK_TARGET_OS)) \
      $$($1_LIBS_$(OPENJDK_TARGET_OS)_$(TOOLCHAIN_TYPE)) $$($1_LIBS_$(TOOLCHAIN_TYPE))

  ifneq ($$($1_REAL_MAPFILE), )
    $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE))
  endif

  ifneq ($$($1_COPY_DEBUG_SYMBOLS), false)
    $1_COPY_DEBUG_SYMBOLS := $(COPY_DEBUG_SYMBOLS)
  endif

  ifneq ($$($1_ZIP_EXTERNAL_DEBUG_SYMBOLS), false)
    $1_ZIP_EXTERNAL_DEBUG_SYMBOLS := $(ZIP_EXTERNAL_DEBUG_SYMBOLS)
  endif

  ifeq ($$($1_COPY_DEBUG_SYMBOLS), true)
    ifneq ($$($1_DEBUG_SYMBOLS), false)
      $$(call SetIfEmpty, $1_SYMBOLS_DIR, $$($1_OUTPUT_DIR))
      # Only copy debug symbols for dynamic libraries and programs.
      ifneq ($$($1_TYPE), STATIC_LIBRARY)
        # Generate debuginfo files.
        ifeq ($(call isTargetOs, windows), true)
          $1_EXTRA_LDFLAGS += -debug "-pdb:$$($1_SYMBOLS_DIR)/$$($1_BASENAME).pdb" \
              "-map:$$($1_SYMBOLS_DIR)/$$($1_BASENAME).map"
          ifeq ($(SHIP_DEBUG_SYMBOLS), public)
            $1_EXTRA_LDFLAGS += "-pdbstripped:$$($1_SYMBOLS_DIR)/$$($1_BASENAME).stripped.pdb"
          endif
          $1_DEBUGINFO_FILES := $$($1_SYMBOLS_DIR)/$$($1_BASENAME).pdb \
              $$($1_SYMBOLS_DIR)/$$($1_BASENAME).map

        else ifeq ($(call isTargetOs, linux), true)
          $1_DEBUGINFO_FILES := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).debuginfo
          # Setup the command line creating debuginfo files, to be run after linking.
          # It cannot be run separately since it updates the original target file
          # Creating the debuglink is done in another command rather than all at once
          # so we can run it after strip is called, since strip can sometimes mangle the
          # embedded debuglink, which we want to avoid.
          $1_CREATE_DEBUGINFO_CMDS := \
              $$($1_OBJCOPY) --only-keep-debug $$($1_TARGET) $$($1_DEBUGINFO_FILES) $$(NEWLINE)
          $1_CREATE_DEBUGLINK_CMDS := $(CD) $$($1_SYMBOLS_DIR) && \
              $$($1_OBJCOPY) --add-gnu-debuglink=$$($1_DEBUGINFO_FILES) $$($1_TARGET)

        else ifeq ($(call isTargetOs, aix), true)
          # AIX does not provide the equivalent of OBJCOPY to extract debug symbols,
          # so we copy the compiled object with symbols to the .debuginfo file, which
          # happens prior to the STRIP_CMD on the original target object file.
          $1_DEBUGINFO_FILES := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).debuginfo
          $1_CREATE_DEBUGINFO_CMDS := $(CP) $$($1_TARGET) $$($1_DEBUGINFO_FILES)

        else ifeq ($(call isTargetOs, macosx), true)
          $1_DEBUGINFO_FILES := \
              $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM/Contents/Info.plist \
              $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM/Contents/Resources/DWARF/$$($1_BASENAME)
          $1_CREATE_DEBUGINFO_CMDS := \
              $(DSYMUTIL) --out $$($1_SYMBOLS_DIR)/$$($1_BASENAME).dSYM $$($1_TARGET)
        endif

        # Since the link rule creates more than one file that we want to track,
        # we have to use some tricks to get make to cooperate. To properly
        # trigger downstream dependants of $$($1_DEBUGINFO_FILES), we must have
        # a recipe in the rule below. To avoid rerunning the recipe every time
        # have it touch the target. If a debuginfo file is deleted by something
        # external, explicitly delete the TARGET to trigger a rebuild of both.
        ifneq ($$(wildcard $$($1_DEBUGINFO_FILES)), $$($1_DEBUGINFO_FILES))
          $$(call LogDebug, Deleting $$($1_BASENAME) because debuginfo files are missing)
          $$(shell $(RM) $$($1_TARGET))
        endif
        $$($1_DEBUGINFO_FILES): $$($1_TARGET)
		$$(if $$(CORRECT_FUNCTION_IN_RECIPE_EVALUATION), \
		  $$(if $$(wildcard $$@), , $$(error $$@ was not created for $$<)) \
		)
		$(TOUCH) $$@

        $1 += $$($1_DEBUGINFO_FILES)

        ifeq ($$($1_ZIP_EXTERNAL_DEBUG_SYMBOLS), true)
          ifeq ($(call isTargetOs, windows), true)
            $1_DEBUGINFO_ZIP := $$($1_SYMBOLS_DIR)/$$($1_BASENAME).diz
          else
            $1_DEBUGINFO_ZIP := $$($1_SYMBOLS_DIR)/$$($1_NOSUFFIX).diz
          endif
          $1 += $$($1_DEBUGINFO_ZIP)

          # The dependency on TARGET is needed for debuginfo files
          # to be rebuilt properly.
          $$($1_DEBUGINFO_ZIP): $$($1_DEBUGINFO_FILES) $$($1_TARGET)
		$(CD) $$($1_SYMBOLS_DIR) && \
		    $(ZIPEXE) -q -r $$@ $$(subst $$($1_SYMBOLS_DIR)/,, $$($1_DEBUGINFO_FILES))

        endif
       endif # !STATIC_LIBRARY
    endif # $1_DEBUG_SYMBOLS != false
  endif # COPY_DEBUG_SYMBOLS

  # Unless specifically set, stripping should only happen if symbols are also
  # being copied.
  $$(call SetIfEmpty, $1_STRIP_SYMBOLS, $$($1_COPY_DEBUG_SYMBOLS))

  ifneq ($$($1_STRIP_SYMBOLS), false)
    ifneq ($$($1_STRIP), )
      # Default to using the global STRIPFLAGS. Allow for overriding with an empty value
      $1_STRIPFLAGS ?= $(STRIPFLAGS)
      $1_STRIP_CMD := $$($1_STRIP) $$($1_STRIPFLAGS) $$($1_TARGET)
    endif
  endif

  ifeq ($$($1_TYPE), STATIC_LIBRARY)
    $1_VARDEPS := $$($1_AR) $$(ARFLAGS) $$($1_ARFLAGS) $$($1_LIBS) \
        $$($1_EXTRA_LIBS)
    $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
        $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)

    # Generating a static library, ie object file archive.
    ifeq ($(STATIC_BUILD), true)
      ifeq ($$($1_USE_MAPFILE_FOR_SYMBOLS), true)
        STATIC_MAPFILE_DEP := $$($1_MAPFILE)
      endif
    endif

    $1_TARGET_DEPS := $$($1_ALL_OBJS) $$($1_RES) $$($1_VARDEPS_FILE) $$(STATIC_MAPFILE_DEP)

    $$($1_TARGET): $$($1_TARGET_DEPS)
	$$(call LogInfo, Building static library $$($1_BASENAME))
	$$(call MakeDir, $$($1_OUTPUT_DIR) $$($1_SYMBOLS_DIR))
	$$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \
	    $$($1_AR) $$(ARFLAGS) $$($1_ARFLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_ALL_OBJS) \
	        $$($1_RES))
        ifeq ($(STATIC_BUILD), true)
          ifeq ($$($1_USE_MAPFILE_FOR_SYMBOLS), true)
	    $(CP) $$($1_MAPFILE) $$(@D)/$$(basename $$(@F)).symbols
          else
	    $(GetSymbols)
          endif
        endif
  else
    # A shared dynamic library or an executable binary has been specified
    ifeq ($$($1_TYPE), LIBRARY)
      # Generating a dynamic library.
      $1_EXTRA_LDFLAGS += $$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME))

      # Create loadmap on AIX. Helps in diagnosing some problems.
      ifneq ($(COMPILER_BINDCMD_FILE_FLAG), )
        $1_EXTRA_LDFLAGS += $(COMPILER_BINDCMD_FILE_FLAG)$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).loadmap
      endif
    endif

    ifeq ($(call isTargetOs, windows), true)
      ifeq ($$($1_EMBED_MANIFEST), true)
        $1_EXTRA_LDFLAGS += -manifest:embed
      endif

      $1_IMPORT_LIBRARY := $$($1_OBJECT_DIR)/$$($1_NAME).lib
      $1_EXTRA_LDFLAGS += "-implib:$$($1_IMPORT_LIBRARY)"
      ifeq ($$($1_TYPE), LIBRARY)
        # To properly trigger downstream dependants of the import library, just as
        # for debug files, we must have a recipe in the rule. To avoid rerunning
        # the recipe every time have it touch the target. If an import library
        # file is deleted by something external, explicitly delete the target to
        # trigger a rebuild of both.
        ifneq ($$(wildcard $$($1_IMPORT_LIBRARY)), $$($1_IMPORT_LIBRARY))
          $$(call LogDebug, Deleting $$($1_BASENAME) because import library is missing)
          $$(shell $(RM) $$($1_TARGET))
        endif
        $$($1_IMPORT_LIBRARY): $$($1_TARGET)
		$(TOUCH) $$@

        $1 += $$($1_IMPORT_LIBRARY)
      endif
    endif

    $1_VARDEPS := $$($1_LD) $$($1_SYSROOT_LDFLAGS) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) \
        $$($1_LIBS) $$($1_EXTRA_LIBS) $$($1_MT) \
        $$($1_CREATE_DEBUGINFO_CMDS) $$($1_MANIFEST_VERSION) \
        $$($1_STRIP_CMD) $$($1_CREATE_DEBUGLINK_CMDS)
    $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \
        $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps)

    $1_LD_OBJ_ARG := $$($1_ALL_OBJS)

    # If there are many object files, use an @-file...
    ifneq ($$(word 17, $$($1_ALL_OBJS)), )
      $1_OBJ_FILE_LIST := $$($1_OBJECT_DIR)/_$1_objectfilenames.txt
      ifneq ($(COMPILER_COMMAND_FILE_FLAG), )
        $1_LD_OBJ_ARG := $(COMPILER_COMMAND_FILE_FLAG)$$($1_OBJ_FILE_LIST)
      else
        # ...except for toolchains which don't support them.
        $1_LD_OBJ_ARG := `cat $$($1_OBJ_FILE_LIST)`
      endif
    endif

    # Unfortunately the @-file trick does not work reliably when using clang.
    # Clang does not propagate the @-file parameter to the ld sub process, but
    # instead puts the full content on the command line. At least the llvm ld
    # does not even support an @-file.
    #
    # When linking a large amount of object files, we risk hitting the limit
    # of the command line length even on posix systems if the path length of
    # the output dir is very long due to our use of absolute paths. To
    # mitigate this, use paths relative to the output dir when linking over
    # 500 files with clang and the output dir path is deep.
    ifneq ($$(word 500, $$($1_ALL_OBJS)), )
      ifeq ($$(TOOLCHAIN_TYPE), clang)
        # There is no strlen function in make, but checking path depth is a
        # reasonable approximation.
        ifneq ($$(word 10, $$(subst /, ,$$(OUTPUTDIR))), )
          $1_LINK_OBJS_RELATIVE := true
          $1_ALL_OBJS_RELATIVE := $$(patsubst $$(OUTPUTDIR)/%, %, $$($1_ALL_OBJS))
        endif
      endif
    endif

    $1_TARGET_DEPS := $$($1_ALL_OBJS) $$($1_RES) $$($1_MANIFEST) \
        $$($1_REAL_MAPFILE) $$($1_VARDEPS_FILE)

    $$($1_TARGET): $$($1_TARGET_DEPS)
                ifneq ($$($1_OBJ_FILE_LIST), )
                  ifeq ($$($1_LINK_OBJS_RELATIVE), true)
		    $$(eval $$(call ListPathsSafely, $1_ALL_OBJS_RELATIVE, $$($1_OBJ_FILE_LIST)))
                  else
		    $$(eval $$(call ListPathsSafely, $1_ALL_OBJS, $$($1_OBJ_FILE_LIST)))
                  endif
                endif
                # Keep as much as possible on one execution line for best performance
                # on Windows
		$$(call LogInfo, Linking $$($1_BASENAME))
		$$(call MakeDir, $$($1_OUTPUT_DIR) $$($1_SYMBOLS_DIR))
                ifeq ($(call isTargetOs, windows), true)

		  $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \
		      $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $$($1_SYSROOT_LDFLAGS) \
		          $(LD_OUT_OPTION)$$($1_TARGET) $$($1_LD_OBJ_ARG) $$($1_RES) \
		          $$($1_LIBS) $$($1_EXTRA_LIBS)) \
		      | $(GREP) -v "^   Creating library .*\.lib and object .*\.exp" || \
		          test "$$$$?" = "1" ; \
		  $$($1_CREATE_DEBUGINFO_CMDS)
		  $$($1_STRIP_CMD)
		  $$($1_CREATE_DEBUGLINK_CMDS)
                 ifeq ($(call isBuildOsEnv, windows.wsl2), true)
		    $$(CHMOD) +x $$($1_TARGET)
                 endif
                else
		  $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \
		      $$(if $$($1_LINK_OBJS_RELATIVE), $$(CD) $$(OUTPUTDIR) ; ) \
		      $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $$($1_SYSROOT_LDFLAGS) \
		          $(LD_OUT_OPTION)$$($1_TARGET) $$($1_LD_OBJ_ARG) $$($1_RES) \
		          $$($1_LIBS) $$($1_EXTRA_LIBS)) ; \
		  $$($1_CREATE_DEBUGINFO_CMDS)
		  $$($1_STRIP_CMD)
		  $$($1_CREATE_DEBUGLINK_CMDS)
                endif
                ifeq ($(call isTargetOs, windows), true)
                  ifneq ($$($1_MANIFEST), )
		    $$($1_MT) -nologo -manifest $$($1_MANIFEST) -identity:"$$($1_NAME).exe, version=$$($1_MANIFEST_VERSION)" -outputresource:$$@;#1
                  endif
                endif
                # On macosx, optionally run codesign on every binary.
                # Remove signature explicitly first to avoid warnings if the linker
                # added a default adhoc signature.
                ifeq ($(MACOSX_CODESIGN_MODE), hardened)
		  $(CODESIGN) --remove-signature $$@
		  $(CODESIGN) -f -s "$(MACOSX_CODESIGN_IDENTITY)" --timestamp --options runtime \
		      --entitlements $$(call GetEntitlementsFile, $$@) $$@
                else ifeq ($(MACOSX_CODESIGN_MODE), debug)
		  $(CODESIGN) --remove-signature $$@
		  $(CODESIGN) -f -s - --entitlements $$(call GetEntitlementsFile, $$@) $$@
                endif
  endif

  ifeq ($(GENERATE_COMPILE_COMMANDS_ONLY), true)
    $1 := $$($1_ALL_OBJS_JSON)
  endif
endef

endif # _NATIVE_COMPILATION_GMK