niceSOFT/libssh | Gitverse

doc/authentication.dox
378 строк13 KB
Jakub Jelen
CVE-2025-4878 Initialize pointers where possible
24 июн 2025, 10:27
24 июн 2025, 10:27697650c
/**
@page libssh_tutor_authentication Chapter 2: A deeper insight on authentication
@section authentication_details A deeper insight on authentication

In our guided tour, we merely mentioned that the user needed to authenticate.
We didn't explain much in detail how that was supposed to happen.
This chapter explains better the four authentication methods: with public keys,
with a password, with challenges and responses (keyboard-interactive), and with
no authentication at all.

If your software is supposed to connect to an arbitrary server, then you
might need to support all authentication methods. If your software will
connect only to a given server, then it might be enough for your software
to support only the authentication methods used by that server. If you are
the administrator of the server, it might be your call to choose those
authentication methods.

It is not the purpose of this document to review in detail the advantages
and drawbacks of each authentication method. You are therefore invited
to read the abundant documentation on this topic to fully understand the
advantages and security risks linked to each method.


@subsection pubkeys Authenticating with public keys

libssh is fully compatible with the openssh public and private keys. You
can either use the automatic public key authentication method provided by
libssh, or roll your own using the public key functions.

The process of authenticating by public key to a server is the following:
 - you scan a list of files that contain public keys. each key is sent to
   the SSH server, until the server acknowledges a key (a key it knows can be
   used to authenticate the user).
 - then, you retrieve the private key for this key and send a message
   proving that you know that private key.
 - when several identity files are specified, then the order of processing of
   these files is from the last-mentioned to the first one
   (if specified in the ~/.ssh/config, then starting from the bottom to the top).

The function ssh_userauth_autopubkey() does this using the available keys in
"~/.ssh/".  The return values are the following:
 - SSH_AUTH_ERROR: some serious error happened during authentication
 - SSH_AUTH_DENIED: no key matched
 - SSH_AUTH_SUCCESS: you are now authenticated
 - SSH_AUTH_PARTIAL: some key matched but you still have to provide an other
                     mean of authentication (like a password).

The ssh_userauth_publickey_auto() function also tries to authenticate using the
SSH agent, if you have one running, or the "none" method otherwise.

If you wish to authenticate with public key by your own, follow these steps:
 - Retrieve the public key with ssh_pki_import_pubkey_file().
 - Offer the public key to the SSH server using ssh_userauth_try_publickey().
   If the return value is SSH_AUTH_SUCCESS, the SSH server accepts to
   authenticate using the public key and you can go to the next step.
 - Retrieve the private key, using the ssh_pki_import_privkey_file() function.
   If a passphrase is needed, either the passphrase specified as argument or
   a callback will be used.
 - Authenticate using ssh_userauth_publickey() with your private key.
 - Do not forget cleaning up memory using ssh_key_free().

Here is a minimalistic example of public key authentication:

@code
int authenticate_pubkey(ssh_session session)
{
  int rc;

  rc = ssh_userauth_publickey_auto(session, NULL, NULL);

  if (rc == SSH_AUTH_ERROR)
  {
     fprintf(stderr, "Authentication failed: %s\n",
       ssh_get_error(session));
     return SSH_AUTH_ERROR;
  }

  return rc;
}
@endcode

@see ssh_userauth_publickey_auto()
@see ssh_userauth_try_publickey()
@see ssh_userauth_publickey()
@see ssh_pki_import_pubkey_file()
@see ssh_pki_import_privkey_file()
@see ssh_key_free()


@subsection password Authenticating with a password

The function ssh_userauth_password() serves the purpose of authenticating
using a password. It will return SSH_AUTH_SUCCESS if the password worked,
or one of other constants otherwise. It's your work to ask the password
and to deallocate it in a secure manner.

If your server complains that the password is wrong, but you can still
authenticate using openssh's client (issuing password), it's probably
because openssh only accept keyboard-interactive. Switch to
keyboard-interactive authentication, or try to configure plain text passwords
on the SSH server.

Here is a small example of password authentication:

@code
int authenticate_password(ssh_session session)
{
  char *password = NULL;
  int rc;

  password = getpass("Enter your password: ");
  rc = ssh_userauth_password(session, NULL, password);
  if (rc == SSH_AUTH_ERROR)
  {
     fprintf(stderr, "Authentication failed: %s\n",
       ssh_get_error(session));
     return SSH_AUTH_ERROR;
  }

  return rc;
}
@endcode

@see ssh_userauth_password


@subsection keyb_int The keyboard-interactive authentication method

The keyboard-interactive method is, as its name tells, interactive. The
server will issue one or more challenges that the user has to answer,
until the server takes an authentication decision.

ssh_userauth_kbdint() is the the main keyboard-interactive function.
It will return SSH_AUTH_SUCCESS,SSH_AUTH_DENIED, SSH_AUTH_PARTIAL,
SSH_AUTH_ERROR, or SSH_AUTH_INFO, depending on the result of the request.

The keyboard-interactive authentication method of SSH2 is a feature that
permits the server to ask a certain number of questions in an interactive
manner to the client, until it decides to accept or deny the login.

To begin, you call ssh_userauth_kbdint() (just set user and submethods to
NULL) and store the answer.

If the answer is SSH_AUTH_INFO, it means that the server has sent a few
questions that you should ask the user. You can retrieve these questions
with the following functions: ssh_userauth_kbdint_getnprompts(),
ssh_userauth_kbdint_getname(), ssh_userauth_kbdint_getinstruction(), and
ssh_userauth_kbdint_getprompt().

Set the answer for each question in the challenge using
ssh_userauth_kbdint_setanswer().

Then, call again ssh_userauth_kbdint() and start the process again until
these functions returns something else than SSH_AUTH_INFO.

Here are a few remarks:
 - Even the first call can return SSH_AUTH_DENIED or SSH_AUTH_SUCCESS.
 - The server can send an empty question set (this is the default behavior
   on my system) after you have sent the answers to the first questions.
   You must still parse the answer, it might contain some
   message from the server saying hello or such things. Just call
   ssh_userauth_kbdint() until needed.
 - The meaning of "name", "prompt", "instruction" may be a little
   confusing. An explanation is given in the RFC section that follows.

Here is a little note about how to use the information from
keyboard-interactive authentication, coming from the RFC itself (rfc4256):

@verbatim

  3.3 User Interface Upon receiving a request message, the client SHOULD
  prompt the user as follows: A command line interface (CLI) client SHOULD
  print the name and instruction (if non-empty), adding newlines. Then for
  each prompt in turn, the client SHOULD display the prompt and read the
  user input.

  A graphical user interface (GUI) client has many choices on how to prompt
  the user. One possibility is to use the name field (possibly prefixed
  with the application's name) as the title of a dialog window in which
  the prompt(s) are presented. In that dialog window, the instruction field
  would be a text message, and the prompts would be labels for text entry
  fields. All fields SHOULD be presented to the user, for example an
  implementation SHOULD NOT discard the name field because its windows lack
  titles; it SHOULD instead find another way to display this information. If
  prompts are presented in a dialog window, then the client SHOULD NOT
  present each prompt in a separate window.

  All clients MUST properly handle an instruction field with embedded
  newlines. They SHOULD also be able to display at least 30 characters for
  the name and prompts. If the server presents names or prompts longer than 30
  characters, the client MAY truncate these fields to the length it can
  display. If the client does truncate any fields, there MUST be an obvious
  indication that such truncation has occurred.

  The instruction field SHOULD NOT be truncated. Clients SHOULD use control
  character filtering as discussed in [SSH-ARCH] to avoid attacks by
  including terminal control characters in the fields to be displayed.

  For each prompt, the corresponding echo field indicates whether or not
  the user input should be echoed as characters are typed. Clients SHOULD
  correctly echo/mask user input for each prompt independently of other
  prompts in the request message. If a client does not honor the echo field
  for whatever reason, then the client MUST err on the side of
  masking input. A GUI client might like to have a checkbox toggling
  echo/mask. Clients SHOULD NOT add any additional characters to the prompt
  such as ": " (colon-space); the server is responsible for supplying all
  text to be displayed to the user. Clients MUST also accept empty responses
  from the user and pass them on as empty strings.
@endverbatim

The following example shows how to perform keyboard-interactive authentication:

@code
int authenticate_kbdint(ssh_session session)
{
  int rc;

  rc = ssh_userauth_kbdint(session, NULL, NULL);
  while (rc == SSH_AUTH_INFO)
  {
    const char *name = NULL, *instruction = NULL;
    int nprompts, iprompt;

    name = ssh_userauth_kbdint_getname(session);
    instruction = ssh_userauth_kbdint_getinstruction(session);
    nprompts = ssh_userauth_kbdint_getnprompts(session);

    if (strlen(name) > 0)
      printf("%s\n", name);
    if (strlen(instruction) > 0)
      printf("%s\n", instruction);
    for (iprompt = 0; iprompt < nprompts; iprompt++)
    {
      const char *prompt = NULL;
      char echo;

      prompt = ssh_userauth_kbdint_getprompt(session, iprompt, &echo);
      if (echo)
      {
        char buffer[128], *ptr;

        printf("%s", prompt);
        if (fgets(buffer, sizeof(buffer), stdin) == NULL)
          return SSH_AUTH_ERROR;
        buffer[sizeof(buffer) - 1] = '\0';
        if ((ptr = strchr(buffer, '\n')) != NULL)
          *ptr = '\0';
        if (ssh_userauth_kbdint_setanswer(session, iprompt, buffer) < 0)
          return SSH_AUTH_ERROR;
        memset(buffer, 0, strlen(buffer));
      }
      else
      {
        char *ptr = NULL;

        ptr = getpass(prompt);
        if (ssh_userauth_kbdint_setanswer(session, iprompt, ptr) < 0)
          return SSH_AUTH_ERROR;
      }
    }
    rc = ssh_userauth_kbdint(session, NULL, NULL);
  }
  return rc;
}
@endcode

@see ssh_userauth_kbdint()
@see ssh_userauth_kbdint_getnprompts()
@see ssh_userauth_kbdint_getname()
@see ssh_userauth_kbdint_getinstruction()
@see ssh_userauth_kbdint_getprompt()
@see ssh_userauth_kbdint_setanswer()


@subsection none Authenticating with "none" method

The primary purpose of the "none" method is to get authenticated **without**
any credential. Don't do that, use one of the other authentication methods,
unless you really want to grant anonymous access.

If the account has no password, and if the server is configured to let you
pass, ssh_userauth_none() might answer SSH_AUTH_SUCCESS.

The following example shows how to perform "none" authentication:

@code
int authenticate_none(ssh_session session)
{
  int rc;

  rc = ssh_userauth_none(session, NULL);
  return rc;
}
@endcode

@subsection auth_list Getting the list of supported authentications

You are not meant to choose a given authentication method, you can
let the server tell you which methods are available. Once you know them,
you try them one after the other.

The following example shows how to get the list of available authentication
methods with ssh_userauth_list() and how to use the result:

@code
int test_several_auth_methods(ssh_session session)
{
  int method, rc;

  rc = ssh_userauth_none(session, NULL);
  if (rc == SSH_AUTH_SUCCESS || rc == SSH_AUTH_ERROR) {
      return rc;
  }

  method = ssh_userauth_list(session, NULL);

  if (method & SSH_AUTH_METHOD_NONE)
  { // For the source code of function authenticate_none(),
    // refer to the corresponding example
    rc = authenticate_none(session);
    if (rc == SSH_AUTH_SUCCESS) return rc;
  }
  if (method & SSH_AUTH_METHOD_PUBLICKEY)
  { // For the source code of function authenticate_pubkey(),
    // refer to the corresponding example
    rc = authenticate_pubkey(session);
    if (rc == SSH_AUTH_SUCCESS) return rc;
  }
  if (method & SSH_AUTH_METHOD_INTERACTIVE)
  { // For the source code of function authenticate_kbdint(),
    // refer to the corresponding example
    rc = authenticate_kbdint(session);
    if (rc == SSH_AUTH_SUCCESS) return rc;
  }
  if (method & SSH_AUTH_METHOD_PASSWORD)
  { // For the source code of function authenticate_password(),
    // refer to the corresponding example
    rc = authenticate_password(session);
    if (rc == SSH_AUTH_SUCCESS) return rc;
  }
  return SSH_AUTH_ERROR;
}
@endcode


@subsection banner Getting the banner

The SSH server might send a banner, which you can retrieve with
ssh_get_issue_banner(), then display to the user.

The following example shows how to retrieve and dispose the issue banner:

@code
int display_banner(ssh_session session)
{
  int rc;
  char *banner = NULL;

/*
 *** Does not work without calling ssh_userauth_none() first ***
 *** That will be fixed ***
*/
  rc = ssh_userauth_none(session, NULL);
  if (rc == SSH_AUTH_ERROR)
    return rc;

  banner = ssh_get_issue_banner(session);
  if (banner)
  {
    printf("%s\n", banner);
    free(banner);
  }

  return rc;
}
@endcode

*/