/
niceSOFT
/
gdb
Обзор
Документация
Войти
/
niceSOFT
/
gdb
Код
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
include/opcode/pru.h
459 строк
16 KB
Dimitar Dimitrov
gas: pru: Add flag to select core revision
15 мар 2026, 10:44
Не верифицирован
15 мар 2026, 10:44
77cb5ee
Код
Авторство
О чём код?
/* TI PRU opcode list for GAS, the GNU assembler. Copyright (C) 2014-2026 Free Software Foundation, Inc. Contributed by Dimitar Dimitrov <dimitar@dinux.eu> This file is part of the GNU opcodes library. GAS/GDB is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GAS/GDB is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS or GDB; see the file COPYING3. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef _PRU_H_ #define _PRU_H_ #include "bfd.h" /**************************************************************************** * This file contains structures, bit masks and shift counts used * by the GNU toolchain to define the PRU instruction set and * access various opcode fields. ****************************************************************************/ /* PRU core revision, as defined by TI. */ enum pru_core_revision { REV_V1 = 1, REV_V2, REV_V3, REV_V4, }; /* Identify different overflow situations for error messages. */ enum overflow_type { call_target_overflow = 0, qbranch_target_overflow, address_offset_overflow, signed_immed16_overflow, unsigned_immed32_overflow, unsigned_immed16_overflow, unsigned_immed8_overflow, unsigned_immed5_overflow, no_overflow }; enum opcode_format_type { opcode_format1, opcode_format2ab, opcode_format2abl, opcode_format2c, opcode_format2de, opcode_format45, opcode_format6 }; /* Opcode ID listing. Used for indexing by the simulator. */ enum pru_instr_type { prui_add, prui_adc, prui_sub, prui_suc, prui_lsl, prui_lsr, prui_rsb, prui_rsc, prui_and, prui_or, prui_xor, prui_min, prui_max, prui_clr, prui_set, prui_not, prui_jmp, prui_jal, prui_ldi, prui_lmbd, prui_halt, prui_slp, prui_xin, prui_xout, prui_xchg, prui_sxin, prui_sxout, prui_sxchg, prui_loop, prui_iloop, prui_qbgt, prui_qbge, prui_qblt, prui_qble, prui_qbeq, prui_qbne, prui_qba, prui_qbbs, prui_qbbc, prui_lbbo, prui_sbbo, prui_lbco, prui_sbco, prui_tsen, prui_mvib, prui_mviw, prui_mvid }; /* This structure holds information for a particular instruction. The args field is a string describing the operands. The following letters can appear in the args: b - a 5.3-bit right source register index OR 8-bit unsigned immediate B - same as 'b', but for LOOP instruction where IMM is decremented c - a 5 bit unsigned immediate for constant table offset d - a 5.3-bit destination register index D - a 5.2-bit destination register index E - for internal GAS self-tests only i - a 32-bit immediate or label j - a 5.3-bit right source register index OR 18-bit PC address l - burst length (unsigned 7-bit immediate or r0.b[0-3]) for xLBCO n - burst length (unsigned 7-bit immediate or r0.b[0-3]) for XFR m - MVI destination operand M - MVI source operand o - a 10-bit signed PC-relative offset O - an 8-bit unsigned PC-relative offset for LOOP termination point R - a 5-bit destination register index s - a 5.3-bit left source register index S - a 5-bit left source register index t - task manager mode (0: disabled, 1: enabled) w - a single bit for "WakeOnStatus" W - a 16-bit unsigned immediate with IO=0 field (LDI) x - an 8-bit XFR wide-bus address immediate Literal ',' character may also appear in the args as delimiter. Most of the macro names are from [1]. The pinfo field is INSN_MACRO for a macro. Otherwise, it is a collection of bits describing the instruction, notably any relevant hazard information. When assembling, the match field contains the opcode template, which is modified by the arguments to produce the actual opcode that is emitted. If pinfo is INSN_MACRO, then this is 0. If pinfo is INSN_MACRO, the mask field stores the macro identifier. Otherwise this is a bit mask for the relevant portions of the opcode when disassembling. If the actual opcode anded with the match field equals the opcode field, then we have found the correct instruction. [1] http://processors.wiki.ti.com/index.php/Programmable_Realtime_Unit */ struct pru_opcode { const char *name; /* The name of the instruction. */ enum pru_core_revision core_rev; /* First PRU core revision supporting this instruction. */ enum pru_instr_type type; /* Instruction type. Used for fast indexing by the simulator. */ const char *args; /* A string describing the arguments for this instruction. */ unsigned long match; /* The basic opcode for the instruction. */ unsigned long mask; /* Mask for the opcode field of the instruction. */ unsigned long pinfo; /* Is this a real instruction or instruction macro? */ enum overflow_type overflow_msg; /* Used to generate informative message when fixup overflows. */ }; /* This value is used in the pru_opcode.pinfo field to indicate that the instruction is a macro or pseudo-op. This requires special treatment by the assembler, and is used by the disassembler to determine whether to check for a nop. */ #define PRU_INSN_MACRO 0x80000000 /* This macro is specially handled throughout the code because it is the only insn to output 2 words (64 bits). */ #define PRU_INSN_LDI32 0x40000000 /* Associates a register name with a 5-bit index and 3-bit regsel. */ struct pru_reg { const char *name; /* Name, e.g. "r10". */ const unsigned int index; /* Index, e.g. 10. */ const unsigned int regsel; /* Register field selector, .e.g RSEL_31_0. */ }; /* Macros for getting and setting an instruction field. */ #define GET_INSN_FIELD(X, i) \ (((i) & OP_MASK_##X) >> OP_SH_##X) #define SET_INSN_FIELD(X, i, v) \ ((i) = (((i) & ~OP_MASK_##X) | (((v) << OP_SH_##X) & OP_MASK_##X))) #define CHECK_INSN_FIELD(X, i) \ (((i) & OP_MASK_##X) == OP_MATCH_##X) /* Masks, values, shifts and macros for accessing the various opcode fields. */ #define OP_SH_FMT1_OP 29 #define OP_MASK_FMT1_OP (0x7u << 29) #define OP_MATCH_FMT1_OP (0x0u << 29) #define OP_SH_FMT2_OP 29 #define OP_MASK_FMT2_OP (0x7u << 29) #define OP_MATCH_FMT2_OP (0x1u << 29) #define OP_SH_FMT4_OP 30 #define OP_MASK_FMT4_OP (0x3u << 30) #define OP_MATCH_FMT4_OP (0x1u << 30) #define OP_SH_FMT5_OP 29 #define OP_MASK_FMT5_OP (0x7u << 29) #define OP_MATCH_FMT5_OP (0x6u << 29) #define OP_SH_FMT6AB_OP 29 #define OP_MASK_FMT6AB_OP (0x7u << 29) #define OP_MATCH_FMT6AB_OP (0x7u << 29) #define OP_SH_FMT6CD_OP 29 #define OP_MASK_FMT6CD_OP (0x7u << 29) #define OP_MATCH_FMT6CD_OP (0x4u << 29) /* Generic fields. */ #define OP_SH_SUBOP 25 #define OP_MASK_SUBOP (0xfu << 25) #define OP_SH_IO 24 #define OP_MASK_IO (0x1u << 24) #define OP_SH_RS2SEL 21 #define OP_MASK_RS2SEL (0x7u << 21) #define OP_SH_RS2 16 #define OP_MASK_RS2 (0x1fu << 16) #define OP_SH_RS1SEL 13 #define OP_MASK_RS1SEL (0x7u << 13) #define OP_SH_RS1 8 #define OP_MASK_RS1 (0x1fu << 8) #define OP_SH_RDSEL 5 #define OP_MASK_RDSEL (0x7u << 5) #define OP_SH_RD 0 #define OP_MASK_RD (0x1fu << 0) #define OP_SH_IMM8 16 #define OP_MASK_IMM8 (0xffu << 16) #define OP_SH_IMM16 8 #define OP_MASK_IMM16 (0xffffu << 8) #define RSEL_7_0 0u #define RSEL_15_8 1u #define RSEL_23_16 2u #define RSEL_31_24 3u #define RSEL_15_0 4u #define RSEL_23_8 5u #define RSEL_31_16 6u #define RSEL_31_0 7u #define RSEL_NUM_ITEMS 8u /* Format 1 specific fields. */ #define SUBOP_ADD 0u #define SUBOP_ADC 1u #define SUBOP_SUB 2u #define SUBOP_SUC 3u #define SUBOP_LSL 4u #define SUBOP_LSR 5u #define SUBOP_RSB 6u #define SUBOP_RSC 7u #define SUBOP_AND 8u #define SUBOP_OR 9u #define SUBOP_XOR 10u #define SUBOP_NOT 11u #define SUBOP_MIN 12u #define SUBOP_MAX 13u #define SUBOP_CLR 14u #define SUBOP_SET 15u /* Format 2 specific fields. */ #define SUBOP_JMP 0u #define SUBOP_JAL 1u #define SUBOP_LDI 2u #define SUBOP_LMBD 3u #define SUBOP_SCAN 4u #define SUBOP_HALT 5u #define SUBOP_MVIX 6u #define SUBOP_XFR 7u #define SUBOP_LOOP 8u #define SUBOP_TSEN 9u #define SUBOP_RSVD_FOR_RFI 14u #define SUBOP_SLP 15u #define OP_SH_WAKEONSTATUS 23 #define OP_MASK_WAKEONSTATUS (0x1u << 23) #define OP_SH_TSKMGR_MODE 23 #define OP_MASK_TSKMGR_MODE (0x1u << 23) /* Format 2 XFR specific fields. */ #define OP_SH_SUBOP_XFR 23 #define OP_MASK_SUBOP_XFR (3u << 23) #define OP_SH_XFR_WBA 15 #define OP_MASK_XFR_WBA (0xffu << 15) #define OP_SH_XFR_S 14 #define OP_MASK_XFR_S (1u << 14) #define OP_SH_XFR_LENGTH 7 #define OP_MASK_XFR_LENGTH (0x7fu << 7) #define SUBOP_XFR_XIN 1u #define SUBOP_XFR_XOUT 2u #define SUBOP_XFR_XCHG 3u /* Format 2 LOOP specific fields. */ #define OP_SH_LOOP_INTERRUPTIBLE 15 #define OP_MASK_LOOP_INTERRUPTIBLE (1u << 15) #define OP_SH_LOOP_JMPOFFS 0 #define OP_MASK_LOOP_JMPOFFS (0xffu << 0) /* Format 2 MVI specific fields. */ #define OP_SH_MVI_RS1_MODE 21 #define OP_MASK_MVI_RS1_MODE (3u << 21) #define OP_SH_MVI_RD_MODE 23 #define OP_MASK_MVI_RD_MODE (3u << 23) #define OP_SH_MVI_LEN 16 #define OP_MASK_MVI_LEN (3u << 16) #define MVI_OP_MODE_DIRECT 0u #define MVI_OP_MODE_INDIRECT 1u #define MVI_OP_MODE_INDIRECT_POSTINC 2u #define MVI_OP_MODE_INDIRECT_PREDEC 3u #define MVI_LEN_BYTE 0u #define MVI_LEN_WORD 1u #define MVI_LEN_DWORD 2u /* Format 4 specific fields. */ #define OP_SH_BROFF98 25 #define OP_MASK_BROFF98 (0x3u << 25) #define OP_SH_BROFF70 0 #define OP_MASK_BROFF70 (0xffu << 0) #define OP_SH_GT 29 #define OP_MASK_GT (0x1u << 29) #define OP_SH_EQ 28 #define OP_MASK_EQ (0x1u << 28) #define OP_SH_LT 27 #define OP_MASK_LT (0x1u << 27) #define OP_MASK_CMP (OP_MASK_GT | OP_MASK_EQ | OP_MASK_LT) /* Format 5 specific fields. */ #define OP_SH_BS 28 #define OP_MASK_BS (0x1u << 28) #define OP_SH_BC 27 #define OP_MASK_BC (0x1u << 27) #define OP_MASK_BCMP (OP_MASK_BS | OP_MASK_BC) /* Format 6 specific fields. */ #define OP_SH_LOADSTORE 28 #define OP_MASK_LOADSTORE (0x1u << 28) #define OP_SH_BURSTLEN64 25 #define OP_MASK_BURSTLEN64 (0x7u << 25) #define OP_SH_BURSTLEN31 13 #define OP_MASK_BURSTLEN31 (0x7u << 13) #define OP_SH_CB 8 #define OP_MASK_CB (0x1fu << 8) #define OP_SH_BURSTLEN0 7 #define OP_MASK_BURSTLEN0 (0x1u << 7) #define OP_SH_RDB 5 #define OP_MASK_RDB (0x3u << 5) #define LSSBBO_BYTECOUNT_R0_BITS7_0 124u #define LSBBO_BYTECOUNT_R0_BITS15_8 125u #define LSBBO_BYTECOUNT_R0_BITS23_16 126u #define LSBBO_BYTECOUNT_R0_BITS31_24 127u /* The following macros define the opcode matches for each instruction code & OP_MASK_INST == OP_MATCH_INST. */ #define OP_MATCH_ADD (OP_MATCH_FMT1_OP | (SUBOP_ADD << OP_SH_SUBOP)) #define OP_MATCH_ADC (OP_MATCH_FMT1_OP | (SUBOP_ADC << OP_SH_SUBOP)) #define OP_MATCH_SUB (OP_MATCH_FMT1_OP | (SUBOP_SUB << OP_SH_SUBOP)) #define OP_MATCH_SUC (OP_MATCH_FMT1_OP | (SUBOP_SUC << OP_SH_SUBOP)) #define OP_MATCH_LSL (OP_MATCH_FMT1_OP | (SUBOP_LSL << OP_SH_SUBOP)) #define OP_MATCH_LSR (OP_MATCH_FMT1_OP | (SUBOP_LSR << OP_SH_SUBOP)) #define OP_MATCH_RSB (OP_MATCH_FMT1_OP | (SUBOP_RSB << OP_SH_SUBOP)) #define OP_MATCH_RSC (OP_MATCH_FMT1_OP | (SUBOP_RSC << OP_SH_SUBOP)) #define OP_MATCH_AND (OP_MATCH_FMT1_OP | (SUBOP_AND << OP_SH_SUBOP)) #define OP_MATCH_OR (OP_MATCH_FMT1_OP | (SUBOP_OR << OP_SH_SUBOP)) #define OP_MATCH_XOR (OP_MATCH_FMT1_OP | (SUBOP_XOR << OP_SH_SUBOP)) #define OP_MATCH_NOT (OP_MATCH_FMT1_OP | (SUBOP_NOT << OP_SH_SUBOP)) #define OP_MATCH_MIN (OP_MATCH_FMT1_OP | (SUBOP_MIN << OP_SH_SUBOP)) #define OP_MATCH_MAX (OP_MATCH_FMT1_OP | (SUBOP_MAX << OP_SH_SUBOP)) #define OP_MATCH_CLR (OP_MATCH_FMT1_OP | (SUBOP_CLR << OP_SH_SUBOP)) #define OP_MATCH_SET (OP_MATCH_FMT1_OP | (SUBOP_SET << OP_SH_SUBOP)) #define OP_MATCH_JMP (OP_MATCH_FMT2_OP | (SUBOP_JMP << OP_SH_SUBOP)) #define OP_MATCH_JAL (OP_MATCH_FMT2_OP | (SUBOP_JAL << OP_SH_SUBOP)) #define OP_MATCH_LDI (OP_MATCH_FMT2_OP | (SUBOP_LDI << OP_SH_SUBOP)) #define OP_MATCH_LMBD (OP_MATCH_FMT2_OP | (SUBOP_LMBD << OP_SH_SUBOP)) #define OP_MATCH_SCAN (OP_MATCH_FMT2_OP | (SUBOP_SCAN << OP_SH_SUBOP)) #define OP_MATCH_HALT (OP_MATCH_FMT2_OP | (SUBOP_HALT << OP_SH_SUBOP)) #define OP_MATCH_SLP (OP_MATCH_FMT2_OP | (SUBOP_SLP << OP_SH_SUBOP)) #define OP_MATCH_MVIB (OP_MATCH_FMT2_OP | (SUBOP_MVIX << OP_SH_SUBOP) \ | (MVI_LEN_BYTE << OP_SH_MVI_LEN)) #define OP_MATCH_MVIW (OP_MATCH_FMT2_OP | (SUBOP_MVIX << OP_SH_SUBOP) \ | (MVI_LEN_WORD << OP_SH_MVI_LEN)) #define OP_MATCH_MVID (OP_MATCH_FMT2_OP | (SUBOP_MVIX << OP_SH_SUBOP) \ | (MVI_LEN_DWORD << OP_SH_MVI_LEN)) #define OP_MATCH_XFR (OP_MATCH_FMT2_OP | (SUBOP_XFR << OP_SH_SUBOP)) #define OP_MATCH_SXFR (OP_MATCH_XFR | OP_MASK_XFR_S) #define OP_MATCH_XIN (OP_MATCH_XFR | (SUBOP_XFR_XIN << OP_SH_SUBOP_XFR)) #define OP_MATCH_XOUT (OP_MATCH_XFR | (SUBOP_XFR_XOUT << OP_SH_SUBOP_XFR)) #define OP_MATCH_XCHG (OP_MATCH_XFR | (SUBOP_XFR_XCHG << OP_SH_SUBOP_XFR)) #define OP_MATCH_SXIN (OP_MATCH_SXFR | (SUBOP_XFR_XIN << OP_SH_SUBOP_XFR)) #define OP_MATCH_SXOUT (OP_MATCH_SXFR | (SUBOP_XFR_XOUT << OP_SH_SUBOP_XFR)) #define OP_MATCH_SXCHG (OP_MATCH_SXFR | (SUBOP_XFR_XCHG << OP_SH_SUBOP_XFR)) #define OP_MATCH_LOOP (OP_MATCH_FMT2_OP | (SUBOP_LOOP << OP_SH_SUBOP)) #define OP_MATCH_ILOOP (OP_MATCH_FMT2_OP | (SUBOP_LOOP << OP_SH_SUBOP) \ | OP_MASK_LOOP_INTERRUPTIBLE) #define OP_MATCH_TSEN (OP_MATCH_FMT2_OP | (SUBOP_TSEN << OP_SH_SUBOP)) #define OP_MATCH_QBGT (OP_MATCH_FMT4_OP | OP_MASK_GT) #define OP_MATCH_QBGE (OP_MATCH_FMT4_OP | OP_MASK_GT | OP_MASK_EQ) #define OP_MATCH_QBLT (OP_MATCH_FMT4_OP | OP_MASK_LT) #define OP_MATCH_QBLE (OP_MATCH_FMT4_OP | OP_MASK_LT | OP_MASK_EQ) #define OP_MATCH_QBEQ (OP_MATCH_FMT4_OP | OP_MASK_EQ) #define OP_MATCH_QBNE (OP_MATCH_FMT4_OP | OP_MASK_GT | OP_MASK_LT) #define OP_MATCH_QBA (OP_MATCH_FMT4_OP | OP_MASK_GT | OP_MASK_LT \ | OP_MASK_EQ) #define OP_MATCH_QBBS (OP_MATCH_FMT5_OP | OP_MASK_BS) #define OP_MATCH_QBBC (OP_MATCH_FMT5_OP | OP_MASK_BC) #define OP_MATCH_LBBO (OP_MATCH_FMT6AB_OP | OP_MASK_LOADSTORE) #define OP_MATCH_SBBO (OP_MATCH_FMT6AB_OP) #define OP_MATCH_LBCO (OP_MATCH_FMT6CD_OP | OP_MASK_LOADSTORE) #define OP_MATCH_SBCO (OP_MATCH_FMT6CD_OP) /* Some special extractions. */ #define OP_MASK_BROFF (OP_MASK_BROFF98 | OP_MASK_BROFF70) #define GET_BROFF_URAW(i) \ ((GET_INSN_FIELD (BROFF98, i) << 8) | (GET_INSN_FIELD (BROFF70, i) << 0)) #define GET_BROFF_SIGNED(i) \ ((long)(GET_BROFF_URAW (i) - (!!(GET_BROFF_URAW (i) & (1 << 9)) << 10))) #define SET_BROFF_URAW(i, v) \ do { \ SET_INSN_FIELD (BROFF98, (i), (v) >> 8); \ SET_INSN_FIELD (BROFF70, (i), (v) & 0xff); \ } while (0) #define GET_BURSTLEN(i) \ ( (GET_INSN_FIELD (BURSTLEN64, (i)) << 4) | \ (GET_INSN_FIELD (BURSTLEN31, (i)) << 1) | \ (GET_INSN_FIELD (BURSTLEN0, (i)) << 0)) #define SET_BURSTLEN(i, v) \ do { \ SET_INSN_FIELD (BURSTLEN64, (i), (v) >> 4); \ SET_INSN_FIELD (BURSTLEN31, (i), (v) >> 1); \ SET_INSN_FIELD (BURSTLEN0, (i), (v) >> 0); \ } while (0) /* Miscellaneous helpers. */ #define OP_MASK_XFR_OP (OP_MASK_FMT2_OP | OP_MASK_SUBOP \ | OP_MASK_SUBOP_XFR | OP_MASK_XFR_S) #define OP_MASK_LOOP_OP (OP_MASK_FMT2_OP | OP_MASK_SUBOP \ | OP_MASK_LOOP_INTERRUPTIBLE) #define OP_MASK_MVIX_OP (OP_MASK_FMT2_OP | OP_MASK_SUBOP \ | OP_MASK_MVI_LEN) /* These are the data structures we use to hold the instruction information. */ extern const struct pru_opcode pru_opcodes[]; extern const int bfd_pru_num_opcodes; /* These are the data structures used to hold the register information. */ extern const struct pru_reg pru_regs[]; extern const int pru_num_regs; /* Machine-independent macro for number of opcodes. */ #define NUMOPCODES bfd_pru_num_opcodes #define NUMREGISTERS pru_num_regs; /* This is made extern so that the assembler can use it to find out what instruction caused an error. */ extern const struct pru_opcode *pru_find_opcode (unsigned long); #endif /* _PRU_H */