/
niceSOFT
/
gdb
Обзор
Документация
Войти
/
niceSOFT
/
gdb
Код
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
binutils/NEWS
1 096 строк
45 KB
Nick Clifton
Add markers to NEWS files for 2.47 release
12 июл 2026, 12:12
12 июл 2026, 12:12
9496702
Код
Авторство
О чём код?
-*- text -*- Changes in 2.47: * The s390 32-bit target (s390-*) is deprecated and planned for removal in a future release, along with the elf32-s390 target format. configure emits an error for this target, which can be overridden using --enable-obsolete. Linux Kernel 6.19 removed s390 32-bit compatibility support. Glibc 2.43 and GCC 16.1 have deprecated s390 32-bit, both with the intent to remove it in a future release. The s390 64-bit target (s390x-*) remains supported. * The AArch64 disassembler now accepts a command line option of "-M annotate" which displays the symbol associated with undefined instructions, should there be one. * The x86 and x86_64 disassemblers now accept a command line option of "-M annotate-immediates" which displays the symbol associated with immediate values, should there be one. * Objdump and readelf now have a --debug-dir=<DIR> option which can be used to tell them where to find separate debug info files. * Add --map-global-vars option to objdump which displays the location and type of global variables in object files. This feature was developed by Guillaume Vacherias <guillaume.vacherias@foss.st.com>. Changes in 2.46: * SFrame stack trace format now represents an undefined return address as an SFrame FRE without any offsets. libsframe provides a new API to test for RA undefined, which is used when dumping SFrame information (e.g. using objdump and readelf) to show such FREs as "RA undefined". * Add --got-contents option to readelf to display the contents of Global Offset Table (GOT) sections. * Internal changes to plugin support, and stricter target checking may result in some errors being exposed in user options passed to the various binutils. For example objcopy --target=TARGET now will only work if the input file is for TARGET whereas prior versions of objcopy accepted other target input files and produced a TARGET output. If you do in fact want the old behaviour the correct usage is objcopy --output-target=TARGET. * NaCl target support is removed. * New versioned release of libsframe: libsframe.so.3. This release introduces versioned symbols with version node name LIBSFRAME_3.0. * objdump and readelf now support displaying SFrame Version 3 information. The existing --sframe option can be used to display sections in the the new V3 format. Display of SFrame Version 2 information continues to be supported (NB: Emission and linking of SFrame Version 2 is discontinued). Changes in 2.45: * New versioned release of libsframe: libsframe.so.2. This release introduces versioned symbols with version node name LIBSFRAME_2.0. Some new symbols have been added to support the new flag SFRAME_F_FDE_FUNC_START_PCREL and retrieving flags from SFrame decoder and encoder objects: - Addition of sframe_decoder_get_flags, sframe_decoder_get_offsetof_fde_start_addr, sframe_encoder_get_flags, sframe_encoder_get_offsetof_fde_start_addr. This release also includes backward-incompatible ABI changes: - Removal of sframe_get_funcdesc_with_addr. - Change in the behavior of sframe_decoder_get_funcdesc_v2, sframe_encoder_add_funcdesc_v2 and sframe_encoder_write. * On s390 64-bit (s390x), gas, ld, objdump, and readelf now support generating and processing SFrame V2 stack trace information (.sframe). The assembler generates SFrame info from CFI directives with option "--gsframe". The linker generates SFrame info for the linker-generated .plt section and merges all .sframe sections. Both objdump and readelf dump SFrame info with option "--sframe[=<section-name>]". * For SFrame stack trace format, the function start address in each SFrame FDE has a changed encoding: The 32-bit signed integer now holds the offset of the start PC of the associated function from the sfde_func_start_address field itself (instead of the earlier where it was the offset from the start of the SFrame section itself). All SFrame sections generated by gas and ld now default to this new encoding, setting the (new) SFRAME_F_FDE_FUNC_START_PCREL flag. Relocatable SFrame links are now fixed. * Readelf now recognizes RISC-V GNU_PROPERTY_RISCV_FEATURE_1_CFI_SS and GNU_PROPERTY_RISCV_FEATURE_1_CFI_LP_UNLABELED for zicfiss and zicfilp extensions. * For RISC-V dis-assembler, the definition of mapping symbol $x is changed, so the file needs to be rebuilt since 2.45 once used .option arch directives. * The LoongArch disassembler now properly accepts multiple disassembly options given by -M, such as "-M no-aliases,numeric". (Previously only the first option took effect.) Changes in 2.44: * Support for Nios II targets has been removed except in the readelf utility, as this architecture has been EOL'ed by Intel. * RISC-V disassembly now supports -M,max option like QEMU to dump instruction without checking architecture support as usual. * gprofng: Support for hardware event counters for Neoverse-N1, Ampere-1, and Appliedmicro processors. Changes in 2.43: * The MIPS port now supports microMIPS MT Application Specific Extension instructions for assembly and disassembly. * Readelf now displays RELR relocations in full detail. * Readelf now has a -j/--display-section option which takes the name or index of a section and displays its contents according to its type. The option can be used multiple times on the command line to display multiple sections. * Base register 0 is now printed as "0" instead of "%r0" in s390 disassembly. * When objdump or readelf are used to display the contents of a .eh_frame section they will now also display the contents of the .eh_frame_hdr section, if present. * Support for the Maverick co-processor (via -mfpu=maverick) on Arm has been removed. The CPU name ep9312 is still recognized, but treated as an alias for arm920t. * Support for the FPA co-procossor on Arm has been removed. In cases where a legacy CPU previously defaulted to using this instruction set extension, the assembler now defaults to no-FPU to avoid quietly misassembling legacy code. * gprofng: Improved the support for hardware event counters: - Re-designed and streamlined the implementation. - Defined a common set of events for ARM processors. - Added specific events for AMD ZEN3 / ZEN4, and Intel Ice Lake processors. Added a minimal support for RISC-V. Changes in 2.42: * The objdump program has a new command line option -Z/--decompress which changes the behaviour of the -s/--full-contents option, forcing it to decompress the contents of any compressed section before they are displayed. In addition when objdump is displaying sections headers (via the -h/--headers command line option) it will now display "COMPRESSED" in the Flags field of any compressed section. * The readelf program has a new command line option --extra-sym-info which extends the information displayed by the --symbols option. When enabled the display will include the name of the section referenced by a symbol's index field (st_shndx). In the future more information may also be displayed when this option is enabled. * objcopy --set-section-flags now supports "large" to set SHF_X86_64_LARGE for ELF x86-64 objects. * objdump --visualize-jumps is now supported on s390 architecture. * The s390 disassembly now optionally includes the instruction description as comment with the s390-specific disassembler option "insndesc": - For objdump it can be enabled with "objdump -M insndesc ...". - In gdb it can be enabled with "set disassembler-options insndesc". Changes in 2.41: * The MIPS port now supports the Sony Interactive Entertainment Allegrex processor, used with the PlayStation Portable, which implements the MIPS II ISA along with a single-precision FPU and a few implementation-specific integer instructions. * Objdump's --private option can now be used on PE format files to display the fields in the file header and section headers. * New versioned release of libsframe: libsframe.so.1. This release introduces versioned symbols with version node name LIBSFRAME_1.0. This release also updates the ABI in an incompatible way: this includes removal of sframe_get_funcdesc_with_addr API, change in the behavior of sframe_fre_get_ra_offset and sframe_fre_get_fp_offset APIs. * SFrame Version 2 is now the default (and only) format version supported by gas, ld, readelf and objdump. * Add command-line option, --strip-section-headers, to objcopy and strip to remove ELF section header from ELF file. * The RISC-V port now supports the following new standard extensions: - Zicond (conditional zero instructions) - Zfa (additional floating-point instructions) - Zvbb, Zvbc, Zvkg, Zvkned, Zvknh[ab], Zvksed, Zvksh, Zvkn, Zvknc, Zvkng, Zvks, Zvksc, Zvkg, Zvkt (vector crypto instructions) * The RISC-V port now supports the following vendor-defined extensions: - XVentanaCondOps * The LoongArch port now supports the following extensions: - LSX (Loongson SIMD eXtension; 128-bit vectors) - LASX (Loongson Advanced SIMD eXtension; 256-bit vectors) - LVZ (Loongson Virtualization extension) - LBT (Loongson Binary Translation extension) * The LoongArch disassembly output received the following tweaks: - Colored output is now supported. - Some pseudo-instructions are now shown in place of the canonical forms, where semantics are equivalent. A disassembler option '-M no-aliases' is added to disable the new behavior. - Signed immediates are no longer printed with their hex representation. - Unrecognized instruction words are now shown with '.word'. Changes in 2.40: * Objdump has a new command line option --show-all-symbols which will make it display all symbols that match a given address when disassembling. (Normally only the first symbol that matches an address is shown). * Add --enable-colored-disassembly configure time option to enable colored disassembly output by default, if the output device is a terminal. Note, this configure option is disabled by default. * DCO signed contributions are now accepted. * objcopy --decompress-debug-sections now supports zstd compressed debug sections. The new option --compress-debug-sections=zstd compresses debug sections with zstd. * addr2line and objdump --dwarf now support zstd compressed debug sections. * The dlltool program now accepts --deterministic-libraries and --non-deterministic-libraries as command line options to control whether or not it generates deterministic output libraries. If neither of these options are used the default is whatever was set when the binutils were configured. * readelf and objdump now have a newly added option --sframe which dumps the SFrame section. Changes in 2.39: * Add --no-weak/-W option to nm to make it ignore weak symbols. * Add an option to objdump and readelf to prevent attempts to access debuginfod servers when following links. * objcopy --weaken, --weaken-symbol, and --weaken-symbols now make ELF STB_GNU_UNIQUE symbols weak. * objdump now supports syntax highlighting of disassembler output for some architectures. Use the --disassembler-color=MODE command line flag, with mode being either off, color, or extended-color. Changes in 2.38: * elfedit: Add --output-abiversion option to update ABIVERSION. * Add support for the LoongArch instruction set. * Tools which display symbols or strings (readelf, strings, nm, objdump) have a new command line option which controls how unicode characters are handled. By default they are treated as normal for the tool. Using --unicode=locale will display them according to the current locale. Using --unicode=hex will display them as hex byte values, whilst --unicode=escape will display them as escape sequences. In addition using --unicode=highlight will display them as unicode escape sequences highlighted in red (if supported by the output device). * readelf -r dumps RELR relative relocations now. * Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been added to objcopy in order to enable UEFI development using binutils. * ar: Add --thin for creating thin archives. -T is a deprecated alias without diagnostics. In many ar implementations -T has a different meaning, as specified by X/Open System Interface. Changes in 2.37: * The readelf tool has a new command line option which can be used to specify how the numeric values of symbols are reported. --sym-base=0|8|10|16 tells readelf to display the values in base 8, base 10 or base 16. A sym base of 0 represents the default action of displaying values under 10000 in base 10 and values above that in base 16. * Binutils now requires a C99 compiler and library to build. * A new format has been added to the nm program. Specifying --format=just-symbols (or just using -j) will tell the program to only display symbol names and nothing else. * A new command line --keep-section-symbols has been added to objcopy and strip. This stops the removal of unused section symbols when the file is copied. Removing these symbols saves space, but sometimes they are needed by other tools. * objcopy --weaken, --weaken-symbol and --weaken-symbols now make undefined symbols weak on targets that support weak symbols. * Readelf and objdump can now display and use the contents of .debug_sup sections. * Readelf and objdump will now follow links to separate debug info files by default. This behaviour can be stopped via the use of the new -wN or --debug-dump=no-follow-links options for readelf and the -WN or --dwarf=no-follow-links options for objdump. Also the old behaviour can be restored by the use of the --enable-follow-debug-links=no configure time option. The semantics of the =follow-links option have also been slightly changed. When enabled, the option allows for the loading of symbol tables and string tables from the separate files which can be used to enhance the information displayed when dumping other sections, but it does not automatically imply that information from the separate files should be displayed. If other debug section display options are also enabled (eg --debug-dump=info) then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. If however non-debug section display options are enabled (eg --sections) then the contents of matching parts of the separate debuginfo file will *not* be displayed. This is because in most cases the user probably only wanted to load the symbol information from the separate debuginfo file. In order to change this behaviour a new command line option --process-links can be used. This will allow di0pslay options to applied to both the main file and any separate debuginfo files. * Nm has a new command line option: --quiet. This suppresses "no symbols" diagnostic. Changes in 2.36: * Update elfedit and readelf with LAM_U48 and LAM_U57 support. * Nm has a new command line option: --ifunc-chars=CHARS. This specifies a string of one or two characters. The first character is used as the type character when displaying global ifunc symbols. The second character, if present is used when displaying local ifunc symbols. In addition a new configure time option --enable-f-for-ifunc-symbols has been created, which if used will change nm's default characters for ifunc symbols from i (both local and global) to F (global) and f (local). * The ar tool's previously unused l modifier is now used for specifying dependencies of a static library. The arguments of this option (or --record-libdeps long form option) will be stored verbatim in the __.LIBDEP member of the archive, which the linker may read at link time. * Readelf can now display the contents of LTO symbol table sections when asked to do so via the --lto-syms command line option. * Readelf now accepts the -C command line option to enable the demangling of symbol names. In addition the --demangle=<style>, --no-demangle, --recurse-limit and --no-recurse-limit options are also now availale. * Add support for the SHF_GNU_RETAIN ELF section flag. This flag specifies that the section should not be garbage collected by the linker. Changes in 2.35: * Changed readelf's display of symbol names when wide mode is not enabled. If the name is too long it will be truncated and the last five characters replaced with "[...]". The old behaviour of displaying 5 more characters but not indicating that truncation has happened can be restored by the use of the -T or --silent-truncation options. * X86 NaCl target support is removed. * The readelf tool now has a -L or --lint or --enable-checks option which turns on warning messages about possible problems with the file(s) being examined. These checks include things like zero-sized sections, which are allowed by the ELF standard but which nevertheless might be of concern if the user was expecting them to actually contain something. Changes in 2.34: * Binutils now supports debuginfod, an HTTP server for distributing ELF/DWARF debugging information as well as source code. When built with debuginfod, readelf and objdump can automatically query debuginfod servers for separate debug files when they otherwise cannot be found. To build binutils with debuginfod, pass --with-debuginfod to configure. This requires libdebuginfod, the debuginfod client library. debuginfod is distributed with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils. * Add --output option to the "ar" program. This option can be used to specify the output directory when extracting members from an archive. * Add --keep-section option to objcopy and strip. This option keeps the specified section from being removed. * Add visualization of jumps inside a function by drawing an ascii character graph between the address and the disassembler column. Enabled via the --visualize-jumps command line option for objdump. Currently supported by the x86, x86_64, and ARM targets. The output looks something like this: c6: | | \----------> be 00 00 00 00 mov $0x0,%esi cb: | | /----> 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # d2 <main+0xd2> d2: | | | 31 c0 xor %eax,%eax d4: | | | /-- e8 00 00 00 00 callq d9 <main+0xd9> d9: | | | \-> bf 02 00 00 00 mov $0x2,%edi de: | +-----------|----- e8 00 00 00 00 callq e3 <main+0xe3> e3: | \-----------|----> 48 89 da mov %rbx,%rdx e6: | | be 00 00 00 00 mov $0x0,%esi eb: | \----- eb de jmp cb <main+0xcb> ed: \-------------------> 48 8b 16 mov (%rsi),%rdx Additional arguments to the --visualize-jumps option add colors to the output. Changes in 2.33: * Add --source-comment[=<txt>] option to objdump which if present, provides a prefix to source code lines displayed in a disassembly. * Add --set-section-alignment <section-name>=<align> option to objcopy to allow the changing of section alignments. * Add --verilog-data-width option to objcopy for verilog targets to control width of data elements in verilog hex format. * Add support for the Armv8.1-M Mainline and M-profile Vector Extension (MVE) instructions. * The separate debug info file options of readelf (--debug-dump=links and --debug-dump=follow) and objdump (--dwarf=links and --dwarf=follow-links) will now display and/or follow multiple links if more than one are present in a file. (This usually happens when gcc's -gsplit-dwarf option is used). In addition objdump's --dwarf=follow-links now also affects its other display options, so that for example, when combined with --syms it will cause the symbol tables in any linked debug info files to also be displayed. In addition when combined with --disassemble the --dwarf= follow-links option will ensure that any symbol tables in the linked files are read and used when disassembling code in the main file. * Add support for dumping types encoded in the Compact Type Format to objdump and readelf. Changes in 2.32: * The addr2line, c++filt, nm and objdump tools now have a limit on the maximum amount of recursion that is allowed whilst demangling strings. The value for this limit is defined by the DEMANGLE_RECRUSE_LIMIT constant declared in the include/demangle.h header file. At the time of writing this constant has the value of 2048. The --no-recurse-limit option can be used to remove the limit, restoring the behaviour of earlier versions of these tools. This may be needed in order to dmangle truly complicated names, but it also leaves the tools vulnerable to stack exhaustion from maliciously constructed mangled names. * Objdump's --disassemble option can now take a parameter, specifying the starting symbol for disassembly. Disassembly will continue from this symbol up to the next symbol or the end of the function. * The MIPS port now supports the Loongson 2K1000 processor which implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE, Loongson-ext ASE, Loongson-ext2 ASE and MSA ASE instructions. Add -march=gs264e option for Loongson 2K1000 processor. * The MIPS port now supports the Loongson 3A2000/3A3000 processor which implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE, Loongson-ext ASE and Loongson-ext2 ASE instructions. Add -march=gs464e option for Loongson 3A2000/3A3000 processor. * The MIPS port now supports the Loongson 3A1000 processor, aka Loongson3a, which implements the MIPS64r2 ISA, the Loongson-mmi ASE, Loongson-cam ASE and Loongson-ext ASE instructions. Add -march=gs464 option for Loongson 3A1000 processor, The -march=loongson3a is an alias of -march=gs464 for compatibility. * The size tool now has a new output format '--format=GNU' or '-G'. The results are displayed in a similar manor to the default berkeley layout, except read-only data is counted in the data column, not the text column. Additionally the total is only included once. Changes in 2.31: * Add support for disassembling netronome Flow Processor (NFP) firmware files. * The AArch64 port now supports showing disassembly notes which are emitted when inconsistencies are found with the instruction that may result in the instruction being invalid. These can be turned on with the option -M notes to objdump. * The AArch64 port now emits warnings when a combination of an instruction and a named register could be invalid. * Added O modifier to ar to display member offsets inside an archive Changes in 2.30: * Add --debug-dump=links option to readelf and --dwarf=links option to objdump which displays the contents of any .gnu_debuglink or .gnu_debugaltlink sections. Add a --debug-dump=follow-links option to readelf and a --dwarf=follow-links option to objdump which causes indirect links into separate debug info files to be followed when dumping other DWARF sections. Changes in 2.29: * The MIPS port now supports microMIPS eXtended Physical Addressing (XPA) instructions for assembly and disassembly. * The MIPS port now supports the microMIPS Release 5 ISA for assembly and disassembly. * The MIPS port now supports the Imagination interAptiv MR2 processor, which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple of implementation-specific regular MIPS and MIPS16e2 ASE instructions. * The SPARC port now supports the SPARC M8 processor, which implements the Oracle SPARC Architecture 2017. * The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly. * Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * Add support for the wasm32 ELF conversion of the WebAssembly file format. * Add --inlines option to objdump, which extends the --line-numbers option so that inlined functions will display their nesting information. * Add --merge-notes options to objcopy to reduce the size of notes in a binary file by merging and deleting redundant notes. * Add support for locating separate debug info files using the build-id method, where the separate file has a name based upon the build-id of the original file. Changes in 2.28: * This version of binutils fixes a problem with PowerPC VLE 16A and 16D relocations which were functionally swapped, for example, R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D performed like R_PPC_VLE_HA16A. This could have been fixed by renumbering relocations, which would keep object files created by an older version of gas compatible with a newer ld. However, that would require an ABI update, affecting other assemblers and linkers that create and process the relocations correctly. It is recommended that all VLE object files be recompiled, but ld can modify the relocations if --vle-reloc-fixup is passed to ld. If the new ld command-line option is not used, ld will ld warn on finding relocations inconsistent with the instructions being relocated. * The nm program has a new command-line option (--with-version-strings) which will display a symbol's version information, if any, after the symbol's name. * The ARC port of objdump now accepts a -M option to specify the extra instruction class(es) that should be disassembled. * The --remove-section option for objcopy and strip now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --remove-section pattern. * The --only-section option for objcopy now accepts section patterns starting with an exclamation point to indicate a non-matching section. A non-matching section is removed from the set of sections matched by an earlier --only-section pattern. * New --remove-relocations=SECTIONPATTERN option for objcopy and strip. This option can be used to remove sections containing relocations. The SECTIONPATTERN is the section to which the relocations apply, not the relocation section itself. Changes in 2.27: * Add a configure option, --enable-64-bit-archive, to force use of a 64-bit format when creating an archive symbol index. * Add --elf-stt-common= option to objcopy for ELF targets to control whether to convert common symbols to the STT_COMMON type. Changes in 2.26: * Add option to objcopy to insert new symbols into a file: --add-symbol <name>=[<section>:]<value>[,<flags>] * Add support for the ARC EM/HS, and ARC600/700 architectures. * Extend objcopy --compress-debug-sections option to support --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF targets. * Add --update-section option to objcopy. * Add --output-separator option to strings. Changes in 2.25: * Add --data option to strings to only print strings in loadable, initialized data sections. Change the default behaviour to be --all, but add a new configure time option of --disable-default-strings-all to restore the old default behaviour. * Add --include-all-whitespace to strings. * Add --dump-section option to objcopy. * Add support for the Andes NDS32. Changes in 2.24: * Objcopy now supports wildcard characters in command-line options that take section names. * Add support for Altera Nios II. Changes in 2.23: * Add support for the VLE extension to the PowerPC architecture. * Add support for x64 Windows target of the delayed-load-library. * Add support for the Renesas RL78 architecture. Changes in 2.22: * Add support for displaying the contents of .debug.macro sections. * Add --preprocessor-arg option to windres to specify additional options passed to preprocessor. * Add --dwarf-start and --dwarf-end to readelf and objdump. These are used by the new Emacs mode, see dwarf-mode.el. * Add support for the Tilera TILEPro and TILE-Gx architectures. changes in 2.21: * Add --interleave-width option to objcopy to allowing copying a range of bytes from the input to the output with the --interleave option. * Add support for the TMS320C6000 (TI C6X) processor family. * Readelf can now display ARM unwind tables (.ARM.exidx / .ARM.extab) using the -u / --unwind option. * Add --dyn-syms to readelf to dump dynamic symbol table. * A new tool - elfedit - has been added to directly manipulate ELF format binaries. * Add to dlltool .def file feature of aliasing PE internal symbol name by '== <ID>' option. * Add a new command-line option -a / --addresses to addr2line to display the address before function name or source filename. * Add a new command-line option -p / --pretty-print to addr2line to have a more human readable output. * The hppa/som targets can now be compiled on any host. Changes in 2.20: * Add support for delay importing to dlltool. Use the --output-delaylib <file> switch to create a delay-import library. The resulting app will load the dll as soon as the first function is called. It will link to __delayLoadHelper2() from the static delayimp library, which will import LoadLibraryA and GetProcAddress from kernel32. * Add a new command-line option, --insn-width=WIDTH, to objdump to specify number of bytes to be displayed on a single line when disassembling instructions. * Readelf can now display the relocated contents of a section as a sequence of bytes via the --relocated-dump=<name|number> command-line option. * The gprof program has been given a new command-line option: --external-symbols-table=<filename> which reads in symbols from a specified file. * The plugin target has been added to bfd. It can load the same shared objects used by gold and uses them to provide basic support for new file formats. * The verilog memory hex dump file format is now supported as an output format for objcopy. * Add --file-alignment, --heap, --image-base, --section-alignment, --stack and --subsystem command-line options to objcopy, which will set PE optional header. * Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w. * --as-needed now links in a dynamic library if it satisfies undefined symbols in regular objects, or in other dynamic libraries. In the latter case the library is not linked if it is found in a DT_NEEDED entry of one of the libraries already linked. * Added --prefix=PREFIX and --prefix-strip=LEVEL switches to objdump to add absolute paths for -S. * Add new option --use-nul-prefixed-import-tables to dlltool to allow fall- back to old import table generation with null element prefix. * Added --identify-strict switch to cause --identify <implib> to report an error when the import library is associated with multiple DLLs. * Added --identify <implib> option to dlltool, which determines the name of the DLL associated with the specified <implib>. * Support for PowerPC booke64 instructions has been removed. The assembler no longer accepts -mbooke32 or -mbooke64 and the disassembler no longer accepts -Mbooke32 or -Mbooke64. Instead, -mbooke and -Mbooke should be used. Changes in 2.19: * Added -wL switch to dump decoded contents of .debug_line. * Added support for "thin" archives which contain pathnames pointing to object files rather than the files themselves and which contain a flattened symbol index for all objects, and archives, which have been added to the archive. * Added -F switch to objdump to include file offsets in the disassembly. * Added -c switch to readelf to allow string dumps of archive symbol index. * Support for SSE5 has been added to the i386 port. * Added -p switch to readelf to allow string dumps of sections. Changes in 2.18: * Resolved 37 coding problems in bfd including static array overruns, null pointer dereferences and use of a malloc buffer after it has been freed, as revealed by static analysis donated by Coverity, Inc. (http://scan.coverity.com). * The binutils sources are now released under version 3 of the GNU General Public License. * A new tool "windmc" has been added for some targets. This is a message compiler which attempts to be compatible with the MS version. * Add codepage support to the windres tool. It now supports many new resource types (e.g. MANIFEST, TOOLBAR, etc). The output generation for binary files is done now via bfd itself. The endianess problems for different hosts are solved. Dumps of .res files can now be re-compiled by windres without lossing resources or compilation errors. Some problems on dialog resource translations are corrected. * Add --extract-symbol command-line option to objcopy, which will strip everything out of an ordinary object file or executable except for its symbol table. Files containing just symbols can be useful to some OSes. Changes in 2.17: * Add "-x NAME" to readelf in addition to "-x NUMBER". * Add -i and -t switches to cxxfilt. -i disables the display of implementation specific extra demangling information (if any) and -t disables the demangling of types. * Add support for the "@<file>" syntax to the command lines of all tools, so that extra switches can be read from <file>. * Add "-W/--dwarf" to objdump to display the contents of the DWARF debug sections. * Add "-t/--section-details" to readelf to display section details. "-N/--full-section-name" is deprecated. * powerpc-linux ld now supports a variant form of PLT and GOT for the security conscious. This form will automatically be chosen when ld detects that all code in regular object files was generated by gcc -msecure-plt. The old PLT and GOT may be forced by a new ld option, --bss-plt. * Add "-i/--inlines" to addr2line to print enclosing scope information for inlined function chains, back to first non-inlined function. * Add "-N/--full-section-name" to readelf to display full section name. * Add "-M entry:<addr>" switch to objdump to specify a function entry address when disassembling VAX binaries. * Add "--globalize-symbol <name>" and "--globalize-symbols <filename>" switches to objcopy to convert local symbols into global symbols. * gprof now allows input files to have histogram records for several memory ranges, provided those ranges are disjoint. Changes in 2.16: * Add "-g/--section-groups" to readelf to display section groups. * objcopy recognizes two new options --strip-unneeded-symbol and --strip-unneeded-symbols, namely for use together with the wildcard matching the original --strip-symbol/--strip-symbols provided, but retaining any symbols matching but needed by relocations. * readelf can now display address ranges from .debug_range sections. This happens automatically when a DW_AT_range attribute is encountered. The command-line switch --debug-dump=Ranges (or -wR) can also be used to display the contents of the .debug_range section. * nm and objdump now have a switch "--special-syms" to enable the displaying of symbols which the target considers to be special. By default these symbols are no longer displayed. Currently the only special symbols are the Mapping symbols used by the ARM port to mark transitions between text and data and between ARM and THUMB code. * dlltool has a switch "--ext-prefix-alias <prefix>" to generate additional import and export symbols with <preifx> prepended to them. Changes in 2.15: * objcopy for MIPS targets now accepts "-M no-aliases" as an option to the disassembler to print the "raw" mips instruction mnemonic instead of some pseudo instruction name. I.E. print "daddu" or "or" instead of "move", "sll" instead of "nop", etc. * objcopy and strip can now take wildcard patterns in symbol names specified on the command line provided that the --wildcard switch is used to enable them. * readelf can now parse archives. * objdump now accepts --debugging-tags to print the debug information in a format compatible with ctags tool. * objcopy and strip now accept --only-keep-debug to create a file containing those sections that would be stripped out by --strip-debug. The idea is that this can be used in conjunction with the --add-gnu-debuglink switch to create a two part program distribution - one a stripped executable and the other the debugging info. * objcopy now accepts --add-gnu-debuglink=<file> to insert a .gnu_debuglink section into a (presumably stripped) executable. This allows the debug information for the file to be held in a separate file. * BFD marks the sections .comment and .note as 'n' in the BSD/POSIX single-character representation. This can be checked by running nm with the -a switch. Changes in 2.14: * Added --info switch to objcopy and strip. * Support for Vitesse IQ2000 added by Red Hat. * Added 'S' encoding to strings to allow the display of 8-bit characters. * Added --prefix-symbols=<text>, --prefix-sections=<text> and --prefix-alloc-sections=<text> to objcopy. * readelf can handle the extensions to the DWARF2 spec used by the Unified Parallel C compiler. * BFD no longer declares a "boolean" type, to avoid clashes with other headers that declare the same. Users of BFD should replace boolean, false and true, with int, 0 and 1, or define their own boolean type. * Support for IP2K added by Denis Chertykov. Changes in 2.13: * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400 and FR500 included. Changes in version 2.12: * Support for Don Knuth's MMIX, by Hans-Peter Nilsson. * size: Add --totals to display summary of sizes (Berkeley format only). * readelf: Add --wide option to not break section header or segment listing lines to fit into 80 columns. * strings: Add --encoding to display wide character strings. By Markus Kuhn. * objcopy: Add --rename-section to change section names. * readelf: Support added for DWARF 2.1 extensions. Support added for displaying the contents of .debug.macinfo sections. * New command-line switches added to objcopy to allow symbols to be kept as global symbols, and also to specify files containing lists of such symbols. by Honda Hiroki. * Support for OpenRISC by Johan Rydberg. * New command-line switch to objcopy --alt-machine-code which creates a binary with an alternate machine code if one is defined in the architecture description. Only supported for ELF targets. By Alexandre Oliva. * New command-line switch to objcopy -B (or --binary-architecture) which sets the architecture of the output file to the given argument. This option only makes sense, if the input target is binary. Otherwise it is ignored. By Stefan Geuken. * Support for PDP-11 by Lars Brinkhoff. Changes in binutils 2.11: * Add support for ARM v5t and v5te architectures and Intel's XScale ARM extenstions. * Add --srec-len and --srec-forceS3 command-line switch to objcopy. By Luciano Gemme. * Support for the MIPS32, by Anders Norlander. * Support for the i860, by Jason Eckhardt. * Support for CRIS (Axis Communications ETRAX series). Changes in binutils 2.10: * Support for 64-bit ELF on HPPA. * New command-line switch to objdump --file-start-context which shows the entire file contents up to the source line first encountered for a given file. * New command-line switch to objdump -M (or --disassembler-options) which takes a parameter which can then be interpreted on a per-target basis by the disassembler. Used by ARM targets to select register name sets, ISA, APCS or raw verions. * objdump support for -mi386:intel which causes disassembly to be displayed with intel syntax. * New program: readelf. This displays the contents of ELF format files, regardless of target machine. * objcopy now takes --change-section-lma, --change-section-vma, and --change-section-address options. The old --adjust-section-vma option is equivalent to --change-section-address. The other --adjust-* options are now renamed to --change-*, although --adjust-* continues to work. * objcopy has a --redefine-sym option that lets you rename symbols. * objcopy now takes a -j/--only-section option to copy only the specified sections. * dlltool now supports the IMPORTS command. * dlltool now takes --export-all-symbols, --no-export-all-symbols, --exclude-symbols, and --no-default-excludes options. Changes in binutils 2.9: * Added windres program, which can be used to manipulate resources in WIN32 files as used on Windows 95 and Windows NT. * The objcopy --gap-fill and --pad-to options operate on the LMA rather than the VMA of the sections. * Added S modifier to ar to not build a symbol table. Changes in binutils 2.8: * The objdump disassembly format has been changed, and hopefully improved. Use the new --prefix-addresses option to get the old format. There are also new --disassemble-zeroes and --no-show-raw-insn options which affect disassembler output. * Formats may now be specified as configuration triplets. For example, objdump -b i386-pc-linux. The triplets are not passed through config.sub, so they must be in canonical form. * Added new addr2line program. This uses the debugging information to convert an address into a file name and line number within a program. * Added --change-leading-char argument to objcopy. * Added --weaken argument to objcopy. * objdump --dynamic-reloc now works on ELF executables and shared libraries. * Added --adjust-vma option to objdump. * Added -C/--demangle option to objdump. * Added -p/--preserve-dates option to strip and objcopy. Changes in binutils 2.7: * Added --enable-shared and --enable-commonbfdlib options to configure. * Added --debugging argument to objdump and objcopy. * Added --defined-only argument to nm. * Added --remove-leading-char argument to objcopy. * The objdump --line-numbers option is now meaningful with --reloc. * Added --line-numbers option to nm. * Added --endian/-EB/-EL option to objdump. * Added support for Alpha OpenVMS/AXP. Changes in binutils 2.6: * Added -N/--strip-symbol and -K/--keep-symbol arguments to strip and objcopy. * Added several arguments to objcopy to provide some control over how the new file is laid out in memory. Also added binary output format to BFD to permit generating plain binary files. * Added --start-address and --stop-address options to objdump. * ar and ranlib now work on AIX. The tools are now built by default on AIX. Changes in binutils 2.5: * Changed objdump -dr to dump the relocs interspersed with the assembly listing, for a more useful listing of relocatable files. * Changed objdump -d/--disassemble to only disassemble SEC_CODE sections. Added -D/--disassemble-all option to disassemble all sections. * Added --size-sort option to nm. * strip and objcopy should now be able to handle dynamically linked ELF executables. Changes in binutils 2.4: * Support for HP-PA (by Jeff Law), i386 Mach (by David Mackenzie), RS/6000 and PowerPC (except ar and ranlib; by Ian Taylor). * Support for Irix 5. * Programs `strip' and `objcopy' will not attempt to write dynamically linked ELF output files, since BFD currently can't create them properly. Changes in binutils 2.3: * A new --stabs argument has been added to objdump to dump stabs sections in ELF and COFF files. * A new program, nlmconv, has been added. It can convert object files into Novell NetWare Loadable Modules. * The strings program has been added. Changes in binutils 2.2: * The 'copy' program has been renamed to 'objcopy', for consistency with 'objdump', and because 'copy' might more plausibly be used as a synonym for 'cp'. * The new stand-alone program c++filt is a filter that converts encoded (mangled) C++ assembly-level identifiers to user-level names. (Note: This may get moved to the gcc distribution.) * nm -o on an archive now prefixes each line with the archive name, matching the output from BSD nm. * ar (and ld) can now read (but not write) BSD4.4-style archives. * New support for H8500, Z8000, and the Hitach SH. * Dis-assembler interface changed to allow sharing with gdb. * There is new Elf code, but it is not yet ready for general use. * There is the beginnings of a test suite. Changes in binutils 2.1: * There is now support for writing ECOFF files, so ld and the other utilities should work on Risc/Ultrix and Irix. Please let us know how well this works. * ar now automatically creates a symbol table (a __.SYMDEF member, in the BSD version), if there are any object files in the archive. So running ranlib is now redundant (unless the non-standard q command is used). This is required for Posix.2 conformance. * The archive-reading code now reads both BSD-style and SYSV-style archives independently of the selected target format. This is to encourage people to switch to SYSV-format, which has a number of advantages. * The strip and copy programs now have options to remove debug-symbols only and/or local symbols only. They now also support long options. Copyright (C) 2012-2026 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. Local variables: fill-column: 79 End: