/
niceSOFT
/
debugedit
Обзор
Документация
Войти
/
niceSOFT
/
debugedit
Код
Задачи
Вики
Пакеты
0
Релизы
0
Аналитика
Безопасность
main
tests/find-debuginfo.at
577 строк
24 KB
Mark Wielaard
tests: check eu-elflint works before testing --check-elf
17 мар 2026, 16:33
17 мар 2026, 16:33
2a1acc6
Код
Авторство
О чём код?
# find-debuginfo.at: Tests for the find-debuginfo script # # Copyright (C) 2025 Red Hat Inc. # Copyright (C) 2025, 2026 Mark J. Wielaard <mark@klomp.org> # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see see <http://www.gnu.org/licenses/>. # Recommended usage for verbose logging to the console: # make check TESTSUITEFLAGS=-v # Tests for scripts/find-debuginfo.in AT_BANNER([find-debuginfo]) # Show which find-debuginfo script we are testing AT_TESTED([find-debuginfo]) m4_define([BUILDO],[[ mkdir -p "$1" cp "${abs_srcdir}"/data/SOURCES/dupe.c "$1" $CC $CFLAGS -g3 -c "`pwd`/$1/dupe.c" -DFOO=$2 -o "$1/dupe.o" echo built "$1/dupe.o" ]]) # Check find-debuginfo --help doesn't crash and burn AT_SETUP([find-debuginfo help]) AT_KEYWORDS([find-debuginfo] [help]) AT_CHECK([find-debuginfo --help],[0],[ignore],[ignore]) AT_CLEANUP AT_SETUP([find-debuginfo on .a]) # skip if ar too old to support O, needed for all the .a tests below AT_SKIP_IF([ test -z "`ar 2>&1 | grep -F '[O]'`" ]) # build a little .a export HOME=${PWD} BUILDO([subdir_foob],[foo]) touch -t 197001010101 subdir_foob/dupe.o # set distinct timestamps BUILDO([subdir_barb],[bar]) touch -t 197001020101 subdir_barb/dupe.o BUILDO([subdir_zo b],[jam]) touch -t 197001030101 subdir_zo?b/dupe.o BUILDO([subdir_club],[pix]) touch -t 197001040101 subdir_club/dupe.o mkdir -p subdir_build $AR rv subdir_build/dupes.a subdir_foob/dupe.o subdir_barb/dupe.o # without P, these duplicate members "/dupe.o" $AR qP subdir_build/dupes.a subdir_zo?b/dupe.o subdir_club/dupe.o # with P, these are subdirectoried members # NB: find-debuginfo can't handle file names with embedded whitespace, PR32862; find | xargs used here and there # list old .a contents AT_CHECK([$AR tPv subdir_build/dupes.a],[0],[stdout],[ignore]) AT_CHECK([test `wc -l < stdout` -eq 4],[0],[ignore],[ignore]) # expect original source tree refs AT_CHECK([$READELF --debug-dump=line subdir_build/dupes.a | grep `pwd`], [0], [stdout], [ignore]) # run conversion, under bash -x tracing for fuller testing log AT_CHECK([[env RPM_BUILD_DIR=${PWD} RPM_BUILD_ROOT=${PWD} RPM_PACKAGE_NAME=pkg RPM_PACKAGE_VERSION=ver RPM_PACKAGE_RELEASE=rel RPM_ARCH=arch \ bash -x `command -v find-debuginfo` -S sourcefiles.list -v ${PWD}/subdir_build]], [0], [stdout], [ignore]) # list new .a contents; ar tPv contains timestamps / subdirs, so not a good fit for AT_DATA() here AT_CHECK([$AR tPv subdir_build/dupes.a],[0],[stdout],[ignore]) AT_CHECK([test `wc -l < stdout` -eq 4],[0],[ignore],[ignore]) # expect non-empty source file list AT_CHECK([grep . ${PWD}/subdir_build/sourcefiles.list | tr '\0' '\n'], [0], [stdout], [ignore]) # expect proper source tree AT_CHECK([$READELF --debug-dump=line subdir_build/dupes.a | grep /usr/src/debug], [0], [stdout], [ignore]) # no traces of old source tree AT_CHECK([$READELF --debug-dump=line subdir_build/dupes.a | grep `pwd`], [1], [stdout], [stderr]) AT_CLEANUP # Helper to create some test binaries m4_define([FIND_DEBUGINFO_PKG_BUILD_SETUP],[[ mkdir subdir_build cp "${abs_srcdir}"/data/SOURCES/foo.c subdir_build cp "${abs_srcdir}"/data/SOURCES/bar.c subdir_build cp "${abs_srcdir}"/data/SOURCES/foobar.h subdir_build cp "${abs_srcdir}"/data/SOURCES/baz.c subdir_build cd subdir_build # Create .o files to pack into an .a later $CC $CFLAGS -g3 -I. -c foo.c $CC $CFLAGS -g3 -I. -c bar.c $CC $CFLAGS -g3 -I. -c baz.c # Three almost identical binaries # so dwz has something to put into the alt file $CC $CFLAGS -Wl,--build-id -g3 -I. -o foo foo.o bar.o baz.o $CC $CFLAGS -Wl,--build-id -g3 -I. -o bar bar.o baz.o foo.o $CC $CFLAGS -Wl,--build-id -g3 -I. -o baz baz.o foo.o bar.o cd .. ]]) # Names of all output files produced by find-debuginfo m4_define([FIND_DEBUGINFO_OUTPUT_FILES], [debugfiles.list debuglinks.list debugsources.list elfbins.list]) # Run find-debuginfo on a small build without any fancy options AT_SETUP([find-debuginfo sources]) AT_KEYWORDS([find-debuginfo] [sources]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Sanity check the binaries have debug sections AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [0], [ignore], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # run debugedit and collect source files for binaries in subdir_build AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo ${PWD}/subdir_build], [0], [stdout], []) # Make sure all three binaries are processed AT_CHECK([grep "Extracting debug info from 3 files" stdout], [0], [ignore], []) # debug sections should have been removed AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [1], [ignore], []) # Now there are .debug files with those .debug_ sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep debug_], [0], [ignore], []) # Check all sources are listed in debugsources.list AT_DATA([expout], [subdir_build/ subdir_build/bar.c subdir_build/baz.c subdir_build/foo.c subdir_build/foobar.h ]) AT_CHECK([cat subdir_build/debugsources.list | tr '\0' '\n' | sort -u], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all parts ran AT_SETUP([find-debuginfo sources debugdata gdb-index]) AT_KEYWORDS([find-debuginfo] [sources] [debugdata] [gdb-index]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Sanity check the binaries have debug sections AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [0], [ignore], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m), .gdb_index (-i) for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i ${PWD}/subdir_build], [0], [stdout], []) # Make sure all three binaries are processed AT_CHECK([grep "Extracting debug info from 3 files" stdout], [0], [ignore], []) # debug sections should have been removed AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [1], [ignore], []) # But they now have a .gnu_debugdata section AT_CHECK([$READELF -S subdir_build/foo | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep gnu_debugdata], [0], [ignore], []) # There are .debug files with those .debug_ sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep debug_], [0], [ignore], []) # The .debug files should also have a .gdb_index sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep gdb_index], [0], [ignore], []) # Check all sources are listed in debugsources.list AT_DATA([expout], [subdir_build/ subdir_build/bar.c subdir_build/baz.c subdir_build/foo.c subdir_build/foobar.h ]) AT_CHECK([cat subdir_build/debugsources.list | tr '\0' '\n' | sort -u], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all parts ran # Same as above but run in parallel (-j) AT_SETUP([find-debuginfo sources debugdata gdb-index jobs]) AT_KEYWORDS([find-debuginfo] [sources] [debugdata] [gdb-index] [jobs]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Sanity check the binaries have debug sections AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [0], [ignore], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m), .gdb_index (-i) for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i -j6 ${PWD}/subdir_build], [0], [stdout], []) # Make sure all three binaries are processed AT_CHECK([grep "Extracting debug info from 3 files" stdout], [0], [ignore], []) # debug sections should have been removed AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [1], [ignore], []) # But they now have a .gnu_debugdata section AT_CHECK([$READELF -S subdir_build/foo | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep gnu_debugdata], [0], [ignore], []) # There are .debug files with those .debug_ sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep debug_], [0], [ignore], []) # The .debug files should also have a .gdb_index sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep gdb_index], [0], [ignore], []) # Check all sources are listed in debugsources.list AT_DATA([expout], [subdir_build/ subdir_build/bar.c subdir_build/baz.c subdir_build/foo.c subdir_build/foobar.h ]) AT_CHECK([cat subdir_build/debugsources.list | tr '\0' '\n' | sort -u], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all parts ran # Same as above, but now with dwz (but without -j) AT_SETUP([find-debuginfo sources debugdata gdb-index dwz]) AT_KEYWORDS([find-debuginfo] [sources] [debugdata] [gdb-index] [dwz]) # At the moment dwz doesn't support .debug_addr AT_SKIP_IF([test "$DWARF_5_DEBUGADDR" = "yes"]) # Too new gdb with too old gdb AT_SKIP_IF([test "$GDB_ADD_INDEX_CHECKS_OK" = "no"]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Sanity check the binaries have debug sections AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [0], [ignore], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m), .gdb_index (-i) and run dwz (--run-dwz) # for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i --run-dwz ${PWD}/subdir_build], [0], [stdout], []) # Make sure all three binaries are processed AT_CHECK([grep "Extracting debug info from 3 files" stdout], [0], [ignore], []) AT_CHECK([grep "DWARF-compressing 3 files" stdout], [0], [ignore], []) # debug sections should have been removed AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [1], [ignore], []) # But they now have a .gnu_debugdata section AT_CHECK([$READELF -S subdir_build/foo | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep gnu_debugdata], [0], [ignore], []) # There are .debug files with those .debug_ sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep debug_], [0], [ignore], []) # The .debug files should also have a .gdb_index sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep gdb_index], [0], [ignore], []) # There should also be a dwz multi file now AT_CHECK([test -f usr/lib/debug/.dwz/pkg-ver-rel.arch], [0], [], []) # Check all sources are listed in debugsources.list AT_DATA([expout], [subdir_build/ subdir_build/bar.c subdir_build/baz.c subdir_build/foo.c subdir_build/foobar.h ]) AT_CHECK([cat subdir_build/debugsources.list | tr '\0' '\n' | sort -u], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all parts ran # Same as above plus doing -j jobs AT_SETUP([find-debuginfo sources debugdata gdb-index dwz jobs]) AT_KEYWORDS([find-debuginfo] [sources] [debugdata] [gdb-index] [dwz] [jobs]) # At the moment dwz doesn't support .debug_addr AT_SKIP_IF([test "$DWARF_5_DEBUGADDR" = "yes"]) # Too new gdb with too old gdb AT_SKIP_IF([test "$GDB_ADD_INDEX_CHECKS_OK" = "no"]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Sanity check the binaries have debug sections AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [0], [ignore], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m), .gdb_index (-i) and run dwz (--run-dwz) # in parallel (-j6) for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i --run-dwz -j6 ${PWD}/subdir_build], [0], [stdout], []) # Make sure all three binaries are processed AT_CHECK([grep "Extracting debug info from 3 files" stdout], [0], [ignore], []) AT_CHECK([grep "DWARF-compressing 3 files" stdout], [0], [ignore], []) # debug sections should have been removed AT_CHECK([$READELF -S subdir_build/foo | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep debug_], [1], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep debug_], [1], [ignore], []) # But they now have a .gnu_debugdata section AT_CHECK([$READELF -S subdir_build/foo | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/bar | grep gnu_debugdata], [0], [ignore], []) AT_CHECK([$READELF -S subdir_build/baz | grep gnu_debugdata], [0], [ignore], []) # There are .debug files with those .debug_ sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep debug_], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep debug_], [0], [ignore], []) # The .debug files should also have a .gdb_index sections AT_CHECK([$READELF -S usr/lib/debug/subdir_build/foo.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/bar.debug | grep gdb_index], [0], [ignore], []) AT_CHECK([$READELF -S usr/lib/debug/subdir_build/baz.debug | grep gdb_index], [0], [ignore], []) # There should also be a dwz multi file now AT_CHECK([test -f usr/lib/debug/.dwz/pkg-ver-rel.arch], [0], [], []) # Check all sources are listed in debugsources.list AT_DATA([expout], [subdir_build/ subdir_build/bar.c subdir_build/baz.c subdir_build/foo.c subdir_build/foobar.h ]) AT_CHECK([cat subdir_build/debugsources.list | tr '\0' '\n' | sort -u], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all output files (and only # those) were created AT_SETUP([find-debuginfo output files]) AT_KEYWORDS([find-debuginfo] [output]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make a snapshot of builddir, including the expected output files AT_CHECK([(ls subdir_build; echo "FIND_DEBUGINFO_OUTPUT_FILES") | sort > expout], [0], [], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo ${PWD}/subdir_build], [0], [ignore], []) # Check builddir against the snapshot AT_CHECK([ls subdir_build | sort], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check all output files (and only # those) were created in the supplied output directory AT_SETUP([find-debuginfo output files (custom dir)]) AT_KEYWORDS([find-debuginfo] [output]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make a snapshot of builddir AT_CHECK([ls subdir_build | sort > expout], [0], [], []) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -p '.*' -o allfiles.list \ -O ${PWD}/output ${PWD}/subdir_build], [0], [ignore], []) # Check builddir against the snapshot AT_CHECK([ls subdir_build | sort], [0], [expout], []) # Check the output directory against the expected list AT_CHECK([(echo allfiles.list; echo "FIND_DEBUGINFO_OUTPUT_FILES") | sort > expout], [0], [], []) AT_CHECK([ls output | sort], [0], [expout], []) AT_CLEANUP # Run find-debuginfo on a small build and check elf file AT_SETUP([find-debuginfo check-elf]) AT_KEYWORDS([find-debuginfo] [check-elf]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make sure eu-elflint --gnu work on the input file. AT_SKIP_IF([! eu-elflint --gnu ./subdir_build/bar | grep -q 'No errors']) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo --check-elf-strict --verbose ${PWD}/subdir_build], [0], [stdout], []) AT_CHECK([grep "No errors" stdout], [0], [ignore], []) AT_CLEANUP # Run find-debuginfo on a small build and check elf file AT_SETUP([find-debuginfo check-elf debugdata]) AT_KEYWORDS([find-debuginfo] [check-elf] [debugdata]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make sure eu-elflint --gnu work on the input file. AT_SKIP_IF([! eu-elflint --gnu ./subdir_build/bar | grep -q 'No errors']) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m) for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m --check-elf-strict --verbose ${PWD}/subdir_build], [0], [stdout], []) AT_CHECK([grep "No errors" stdout], [0], [ignore], []) AT_CLEANUP # Run find-debuginfo on a small build and check elf file AT_SETUP([find-debuginfo check-elf debugdata gdb-index]) AT_KEYWORDS([find-debuginfo] [check-elf] [debugdata] [gdb-index]) # Too new gdb with too old gdb AT_SKIP_IF([test "$GDB_ADD_INDEX_CHECKS_OK" = "no"]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make sure eu-elflint --gnu work on the input file. AT_SKIP_IF([! eu-elflint --gnu ./subdir_build/bar | grep -q 'No errors']) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m) and .gdb_index (-i) for binaries in # subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i --check-elf-strict --verbose ${PWD}/subdir_build], [0], [stdout], []) AT_CHECK([grep "No errors" stdout], [0], [ignore], []) AT_CLEANUP # Run find-debuginfo on a small build and check elf file AT_SETUP([find-debuginfo check-elf debugdata gdb-index dwz]) AT_KEYWORDS([find-debuginfo] [check-elf] [debugdata] [gdb-index] [dwz]) # At the moment dwz doesn't support .debug_addr AT_SKIP_IF([test "$DWARF_5_DEBUGADDR" = "yes"]) # Too new gdb with too old gdb AT_SKIP_IF([test "$GDB_ADD_INDEX_CHECKS_OK" = "no"]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Make sure eu-elflint --gnu work on the input file. AT_SKIP_IF([! eu-elflint --gnu ./subdir_build/bar | grep -q 'No errors']) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. # # generate .gnu_debugdata (-m), .gdb_index (-i) and run dwz (--run-dwz) # for binaries in subdir_build. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo -m -i --run-dwz --check-elf-strict --verbose ${PWD}/subdir_build], [0], [stdout], []) AT_CHECK([grep "No errors" stdout], [0], [ignore], []) AT_CLEANUP # Run find-debuginfo on a small build, create an archive and check files AT_SETUP([find-debuginfo check-elf ar]) AT_KEYWORDS([find-debuginfo] [check-elf] [ar]) # skip if ar too old to support O AT_SKIP_IF([ test -z "`ar 2>&1 | grep -F '[O]'`" ]) FIND_DEBUGINFO_PKG_BUILD_SETUP # Create an archive from the object files mkdir -p subdir_ar AT_CHECK([ar q ./subdir_ar/archive.a $(find subdir_build -name '*.o')], [0], [ignore], [ignore]) # Make sure eu-elflint --gnu work on the input archive. # It might not if llvm is used for example. AT_SKIP_IF([! eu-elflint --gnu ./subdir_ar/archive.a | grep -q 'No errors']) # We need to set some environment variables for running find-debuginfo # normally set by rpmbuild. AT_CHECK([env RPM_BUILD_DIR=${PWD} \ RPM_BUILD_ROOT=${PWD} \ RPM_PACKAGE_NAME=pkg \ RPM_PACKAGE_VERSION=ver \ RPM_PACKAGE_RELEASE=rel \ RPM_ARCH=arch \ find-debuginfo --check-elf-strict --verbose ${PWD}/subdir_ar], [0], [stdout], [ignore]) AT_CHECK([grep "check AR file" stdout], [0], [ignore], []) AT_CHECK([grep "No errors" stdout], [0], [ignore], []) AT_CLEANUP