Makefile - master - glscene/pasdoc

Makefile
561 строка18 KB
Michalis Kamburelis
Build release on Raspberry Pi too
15 ноя 2024, 11:44
15 ноя 2024, 11:44373078b
include Makefile-autodetect

#######################################################################
# BASE CONFIGURATION
#######################################################################

# The version of the package.
# This must be changed on each version change,
# as documented at https://github.com/pasdoc/pasdoc/wiki/ReleaseMaking .
VERSION := 0.16.0

# The name of the package / file name
PACKAGENAME := pasdoc

# Location of units source code.
UNIT_DIRS := ./source/component ./source/console \
  ./source/component/tipue

INCLUDE_DIRS := ./source/component ./source/component/images

# Base file to compile
FILE := ./source/console/pasdoc.dpr

# Base directory where binaries will go
ifndef BINDIR
BINDIR := bin
endif

# Base directory where libs, units, objects files will go
ifndef OUTDIR
OUTDIR := lib
endif

# The following is for creating the final package, comment out
# if that particular section is not used.
# BINFILES: Files that will go into the resulting bin directory
# DOCFILES: Files that will go into the resulting docs directory
BINFILES := $(BINDIR)/pasdoc$(EXE) \
	$(BINDIR)/pascal_pre_proc$(EXE) \
	$(BINDIR)/file_to_pascal_string$(EXE) \
	$(BINDIR)/file_to_pascal_data$(EXE)
DOCFILES := LICENSE ChangeLog.md README.md

PACKAGE_BASENAME := $(PACKAGENAME)-$(VERSION)-$(PACKAGE_BASENAME_SUFFIX)

############################################################################
# Variables below are *not* configurable, i.e. don't change them (unless
# you know what you're doing and you're able to accordingly change
# some rules later in this Makefile, that may depend on given variable's
# value).
############################################################################

PACKAGEDIR := $(PACKAGEBASEDIR)$(PATHSEP)$(PACKAGENAME)

############################################################################
# Change the paths to the correct types
#######################################################################

ifdef OUTDIR
OUTDIR := $(subst /,$(PATHSEP),$(OUTDIR))
endif
ifdef BINDIR
BINDIR := $(subst /,$(PATHSEP),$(BINDIR))
endif
FILE := $(subst /,$(PATHSEP),$(FILE))
UNIT_DIRS := $(subst /,$(PATHSEP),$(UNIT_DIRS))
INCLUDE_DIRS := $(subst /,$(PATHSEP),$(INCLUDE_DIRS))
ifdef BINFILES
BINFILES := $(subst /,$(PATHSEP),$(BINFILES))
endif
ifdef DOCFILES
DOCFILES := $(subst /,$(PATHSEP),$(DOCFILES))
endif

############################################################################
# FreePascal Configuration
############################################################################

# FPC_DEFAULT means "use current os and processor",
# calling just fpc binary on the path
FPC_DEFAULT := fpc

FPC_WIN32        := $(FPC_DEFAULT) -Pi386    -Twin32
FPC_WIN64        := $(FPC_DEFAULT) -Px86_64  -Twin64
FPC_GO32         := $(FPC_DEFAULT) -Pi386    -Tgo32v2
FPC_LINUX_X86    := $(FPC_DEFAULT) -Pi386    -Tlinux
FPC_LINUX_X86_64 := $(FPC_DEFAULT) -Px86_64  -Tlinux
FPC_LINUX_ARM    := $(FPC_DEFAULT) -Parm     -Tlinux
FPC_LINUX_AARCH64:= $(FPC_DEFAULT) -Paarch64 -Tlinux
FPC_LINUX_M68K   := $(FPC_DEFAULT) -Pm68k    -Tlinux
FPC_LINUX_PPC    := $(FPC_DEFAULT) -Ppowerpc -Tlinux
FPC_AMIGA        := $(FPC_DEFAULT) -Pppc     -Tamiga
FPC_BEOS         := $(FPC_DEFAULT) -Pi386    -Tbeos
FPC_OS2          := $(FPC_DEFAULT) -Pi386    -Tos2
FPC_FREEBSD_X86  := $(FPC_DEFAULT) -Pi386    -Tfreebsd
FPC_DARWIN_X86   := $(FPC_DEFAULT) -Pi386    -Tdarwin
FPC_DARWIN_X86_64:= $(FPC_DEFAULT) -Px86_64  -Tdarwin

FPC_UNIT_DIRS := $(foreach units,$(UNIT_DIRS),-Fu$(units))
FPC_INCLUDE_DIRS := $(foreach units,$(INCLUDE_DIRS),-Fi$(units))

FPC_COMMON_FLAGS := -FE$(BINDIR) -FU$(OUTDIR) @pasdoc-fpc.cfg \
  $(FPC_UNIT_DIRS) $(FPC_INCLUDE_DIRS)

FPC_DEBUG_FLAGS := $(FPC_COMMON_FLAGS)
ifdef CHECK_MEM_LEAK
  FPC_DEBUG_FLAGS := -dCHECK_MEM_LEAK $(FPC_DEBUG_FLAGS)
endif

FPC_RELEASE_FLAGS := -dRELEASE $(FPC_COMMON_FLAGS)

############################################################################
# Delphi configuration
############################################################################

# It seems Borland named Delphi/Win32 command-line compiler
# dcc32 and Delphi/Linux (aka Kylix) as dcc (without 32).
DCC_WIN32 := dcc32
DCC_LINUX := dcc

DCC_UNIT_DIRS := $(foreach units,$(UNIT_DIRS),-U$(units))
DCC_INCLUDE_DIRS := $(foreach units,$(INCLUDE_DIRS),-I$(units))

# Command-line dcc prints non-errorlines while it works,
# I guess that it was meant to somehow indicate
# compilation progress, although it's rather confusing and hides
# meaningfull error/warning lines. That's why we pass -Q below.

DCC_COMMON_FLAGS := -E$(BINDIR) -N$(OUTDIR) -L$(OUTDIR) -M -H -W -Q \
  -DCPU86 -DENDIAN_LITTLE $(DCC_UNIT_DIRS) $(DCC_INCLUDE_DIRS)

DCC_DEBUG_FLAGS := -$$Q+ -$$R+ $(DCC_COMMON_FLAGS)

DCC_RELEASE_FLAGS := -$$O+ $(DCC_COMMON_FLAGS)

############################################################################
# Building (and cleaning after building)
############################################################################

# Default target
.PHONY: default
default: build-fpc-default-debug

# Clean up the output files.
.PHONY: clean
clean:
	rm -Rf source/console/pasdoc.compiled \
	       source/packages/lazarus/lib/ \
	       source/gui/pasdoc_gui.compiled \
	       source/gui/pasdoc_gui \
	       source/gui/pasdoc_gui.exe \
	       source/gui/pasdoc_gui.app \
	       source/gui/*.o \
	       source/gui/*.or \
	       source/gui/*.ppu \
	       source/gui/*.res
	$(MAKE) clean -C tests/
	$(MAKE) clean -C source/autodoc/
ifdef OUTDIR
	rm -Rf $(OUTDIR)
	mkdir $(OUTDIR)
	touch $(OUTDIR)/.gitkeep
endif
ifdef BINDIR
	rm -Rf $(BINDIR)
endif

# Make sure that $(BINDIR) and $(OUTDIR) exist, create them if necessary.
# This is executed before executing any `build-xxx' target,
# to make sure that compilation works "out of the box".
#
# Always using special directories for $(BINDIR) and $(OUTDIR) is handy
# -- reduces clutter, allows us to easily write `clean' target.
#
# Note that, unless you override $(BINDIR) and $(OUTDIR) at command-line,
# they don't really help you when you have various compilers, for
# various os/arch etc. because $(BINDIR) and $(OUTDIR) are always the same
# anyway, so all compilers reuse the same dirs... In the future various
# build-<compiler>-<os/arch> targets may be tweaked to use different
# $(BINDIR) and $(OUTDIR).
.PHONY: make-dirs
make-dirs:
ifdef OUTDIR
	$(MKDIRPROG) -p $(OUTDIR)
endif
ifdef BINDIR
	$(MKDIRPROG) -p $(BINDIR)
endif

# fpc- build targets

.PHONY: build-fpc-default-debug
build-fpc-default-debug: make-dirs
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) $(FILE)

.PHONY: build-fpc-default
build-fpc-default: make-dirs
	$(FPC_DEFAULT) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-win32
build-fpc-win32: make-dirs
	$(FPC_WIN32) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-win64
build-fpc-win64: make-dirs
	$(FPC_WIN64) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-go32
build-fpc-go32: make-dirs
	$(FPC_GO32) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-x86
build-fpc-linux-x86: make-dirs
	$(FPC_LINUX_X86) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-x86_64
build-fpc-linux-x86_64: make-dirs
	$(FPC_LINUX_X86_64) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-arm
build-fpc-linux-arm: make-dirs
	$(FPC_LINUX_ARM) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-aarch64
build-fpc-linux-aarch64: make-dirs
	$(FPC_LINUX_AARCH64) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-m68k
build-fpc-linux-m68k: make-dirs
	$(FPC_LINUX_M68K) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-amiga
build-fpc-amiga: make-dirs
	$(FPC_AMIGA) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-beos
build-fpc-beos: make-dirs
	$(FPC_BEOS) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-os2
build-fpc-os2: make-dirs
	$(FPC_OS2) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-linux-ppc
build-fpc-linux-ppc: make-dirs
	$(FPC_LINUX_PPC) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-freebsd-x86
build-fpc-freebsd-x86: make-dirs
	$(FPC_FREEBSD_X86) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-darwin-x86
build-fpc-darwin-x86: make-dirs
	$(FPC_DARWIN_X86) $(FPC_RELEASE_FLAGS) $(FILE)

.PHONY: build-fpc-darwin-x86_64
build-fpc-darwin-x86_64: make-dirs
	$(FPC_DARWIN_X86_64) $(FPC_RELEASE_FLAGS) $(FILE)

# Delphi/Kylix build targets

# Implementation note: this $(subst...) is needed, otherwise under Windows
# dcc dumbly prints "file not found" when $(FILE) uses "/" (yes, "/" is allowed
# path separator in all normal Windows programs...) (and $(FILE) uses
# "/" because this is sensible default value for $(PATHSEP), otherwise we would
# have to do dirty checks to guess whether we're used under Unix or Win32 in
# this Makefile).
.PHONY: build-delphi-win32
build-delphi-win32: make-dirs
	$(DCC_WIN32) $(DCC_RELEASE_FLAGS) $(subst $(PATHSEP),\\,$(FILE))

.PHONY: build-delphi-linux-x86
build-delphi-linux-x86: make-dirs
	$(DCC_LINUX) $(DCC_RELEASE_FLAGS) $(FILE)

# obsolete target
.PHONY: build-pascal_pre_proc
build-pascal_pre_proc: make-dirs
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) ./source/tools/pascal_pre_proc.dpr

.PHONY: build-tools
build-tools: make-dirs
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) ./source/tools/pascal_pre_proc.dpr
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) ./source/tools/file_to_pascal_data.dpr
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) ./source/tools/file_to_pascal_string.dpr

.PHONY: build-gui
build-gui:
	if ! lazbuild $(LAZBUILD_OPTIONS) source/packages/lazarus/pasdoc_package.lpk; then \
	  echo 'lazbuild sometimes fails with Access Violation, retrying' && \
	  rm -Rf source/packages/lazarus/lib/ && \
	  lazbuild $(LAZBUILD_OPTIONS) source/packages/lazarus/pasdoc_package.lpk; \
	fi
	if ! lazbuild $(LAZBUILD_OPTIONS) source/gui/pasdoc_gui.lpi; then \
	  echo 'lazbuild sometimes fails with Access Violation, retrying' && \
	  rm -Rf source/gui/lib/ && \
	  lazbuild $(LAZBUILD_OPTIONS) source/gui/pasdoc_gui.lpi; \
	fi
	strip source/gui/pasdoc_gui$(EXE)

.PHONY: tests-fpcunit
tests-fpcunit: make-dirs
	$(FPC_DEFAULT) $(FPC_DEBUG_FLAGS) ./tests/fpcunit/test_pasdoc.lpr
	bin/test_pasdoc -a

.PHONY: tests
tests:
	cd tests/ && ./run_all_tests.sh

############################################################################
# Help targets
############################################################################

.PHONY: help
help:
	@echo "Available targets of this Makefile:"
	@echo
	@echo "Compiling:"
	@echo
	@echo "  default, build-fpc-default-debug:"
	@echo "    Compile debug version with FPC. This is the default target."
	@echo
	@echo "  build-fpc-default:"
	@echo "    Compile release version with FPC."
	@echo
	@echo "  build-<compiler>-<os/arch>:"
	@echo "    Compile release version with given compiler for given OS"
	@echo "    and architecture. Available values for <compiler> are:"
	@echo "      fpc"
	@echo "      delphi"
	@echo "    Available values for <os/arch> are:"
	@echo "      win32"
	@echo "      win64"
	@echo "      go32"
	@echo "      linux-x86"
	@echo "      linux-x86_64"
	@echo "      linux-m68k"
	@echo "      linux-arm"
	@echo "      linux-aarch64"
	@echo "      linux-ppc"
	@echo "      amiga"
	@echo "      beos"
	@echo "      os2"
	@echo "      freebsd-x86"
	@echo "      darwin-x86"
	@echo "      darwin-x86_64"
	@echo "    Of course, not all combinations of <compiler> and <os/arch>"
	@echo "    are available..."
	@echo
	@echo "    Note that in case of FPC, these targets assume that variable"
	@echo "    FPC_<os/arch> points to a compiler that produces"
	@echo "    a binary for given <os/arch>. So if you want to cross-compile"
	@echo "    with FPC, make sure to adjust these variables accordingly."
	@echo
	@echo "  build-gui:"
	@echo "    Compile pasdoc_gui with lazbuild (Lazarus build tool)."
	@echo
	@echo "  clean:"
	@echo "    Clean files produced during compilation."
	@echo
	@echo "Archiving a release:"
	@echo
	@echo "  dist-<os/arch>:"
	@echo "    This calls \"clean\", then \"build-<compiler>-<os/arch>\""
	@echo "    (using the preferred <compiler> for making a release on"
	@echo "    this <os/arch> -- currently, always FPC)"
	@echo "    and then makes a release archive for given <os/arch>."
	@echo
	@echo "  dist-src:"
	@echo "    This creates source archive for the current sources."

.PHONY: version
version:
	@echo $(VERSION)

.PHONY: tag
tag:
	git log --pretty=oneline HEAD^..HEAD
	git tag -a v$(VERSION) -m "Tagging the $(VERSION) version of PasDoc."
	git push origin --tags

############################################################################
# Targets to make release archives
#
# Some general targets are present here, and targets
# that build and archive for particular platform.
# Note that each dist-<os/arch> target assumes that according build-fpc-<os/arch>
# target produces a pasdoc binary that works under <os/arch> platform.
# So if you want to cross-compile to create release archives,
# make sure that variables FPC_<os/arch> are properly set.
#
# Note that dist targets use the most common archive format for given platform.
# E.g. for Unices this is tar.gz, for Win32/DOS this is zip.
# There would be no problems with creating zip archives under Unices
# (or tar.gz under Win32/DOS), but it's just more common
# to use tar.gz under Unices.
############################################################################

# This target creates and fills directory $(PACKAGEDIR)
# (it's *always* the subdirectory $(PACKAGENAME) inside $(PACKAGEBASEDIR)).
# Use this to prepare file tree before archiving --- the only remaining
# thing after executing this target is to archive $(PACKAGEDIR).
.PHONY: dist-prepare
dist-prepare:
	rm -rf $(PACKAGEDIR)
	$(MKDIRPROG) -p $(PACKAGEDIR)
	$(MAKE) build-tools
ifdef BINFILES
	$(MKDIRPROG) $(PACKAGEDIR)$(PATHSEP)bin
	cp $(BINFILES) $(PACKAGEDIR)$(PATHSEP)bin$(PATHSEP)
endif
ifdef DOCFILES
	$(MKDIRPROG) $(PACKAGEDIR)$(PATHSEP)docs
	cp -R $(DOCFILES) $(PACKAGEDIR)$(PATHSEP)docs
endif
ifdef ADD_PASDOC_GUI
	$(MAKE) build-gui
ifdef PASDOC_GUI_BUNDLE
	rm -Rf source/gui/pasdoc_gui.app/
	cd source/gui/ && macos/create_bundle.sh $(VERSION)
	cp -R source/gui/pasdoc_gui.app $(PACKAGEDIR)$(PATHSEP)bin$(PATHSEP)
else
	cp source/gui/pasdoc_gui$(EXE) $(PACKAGEDIR)$(PATHSEP)bin$(PATHSEP)
endif
endif

# This target archives distribution into a zip file.
#
# Implementation notes: note that zip will add files to existing zip archive,
# if it already exists, so for safety below I'm first `rm -f ...' zip archive,
# then creating it.
.PHONY: dist-zip
dist-zip: dist-prepare
	rm -f $(PACKAGEBASEDIR)$(PATHSEP)$(PACKAGE_BASENAME).zip
	cd $(PACKAGEBASEDIR) && zip -r $(PACKAGE_BASENAME).zip $(PACKAGENAME)/*
	mv $(PACKAGEBASEDIR)$(PATHSEP)$(PACKAGE_BASENAME).zip .

# This target archives distribution into a tar.gz file.
.PHONY: dist-tar-gz
dist-tar-gz: dist-prepare
	cd $(PACKAGEBASEDIR) && tar czvf $(PACKAGE_BASENAME).tar.gz $(PACKAGENAME)/
	mv $(PACKAGEBASEDIR)$(PATHSEP)$(PACKAGE_BASENAME).tar.gz .

.PHONY: dist-go32
dist-go32: clean build-fpc-go32
	$(MAKE) --no-print-directory \
	  dist-zip EXE=.exe PACKAGE_BASENAME_SUFFIX=go32 \
	  FPC_DEFAULT='$(FPC_GO32)'

.PHONY: dist-win32
dist-win32: clean build-fpc-win32
	$(MAKE) --no-print-directory \
	  dist-zip EXE=.exe PACKAGE_BASENAME_SUFFIX=win32 \
	  FPC_DEFAULT='$(FPC_WIN32)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=win32 --cpu=i386'

.PHONY: dist-win64
dist-win64: clean build-fpc-win64
	$(MAKE) --no-print-directory \
	  dist-zip EXE=.exe PACKAGE_BASENAME_SUFFIX=win64 \
	  FPC_DEFAULT='$(FPC_WIN64)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=win64 --cpu=x86_64'

.PHONY: dist-os2
dist-os2: clean build-fpc-os2
	$(MAKE) --no-print-directory \
	  dist-zip EXE=.exe PACKAGE_BASENAME_SUFFIX=os2 \
	  FPC_DEFAULT='$(FPC_OS2)'

.PHONY: dist-beos
dist-beos: clean build-fpc-beos
	$(MAKE) --no-print-directory \
	  dist-zip PACKAGE_BASENAME_SUFFIX=be-x86 \
	  FPC_DEFAULT='$(FPC_BEOS)'

.PHONY: dist-linux-m68k
dist-linux-m68k: clean build-fpc-linux-m68k
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-m68k \
	  FPC_DEFAULT='$(FPC_LINUX_M68K)'

.PHONY: dist-linux-x86
dist-linux-x86: clean build-fpc-linux-x86
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-x86 \
	  FPC_DEFAULT='$(FPC_LINUX_X86)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=linux --cpu=i386'

.PHONY: dist-linux-x86_64
dist-linux-x86_64: clean build-fpc-linux-x86_64
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-x86_64 \
	  FPC_DEFAULT='$(FPC_LINUX_X86_64)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=linux --cpu=x86_64'

.PHONY: dist-linux-arm
dist-linux-arm: clean build-fpc-linux-arm
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-arm \
	  FPC_DEFAULT='$(FPC_LINUX_ARM)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=linux --cpu=arm'

.PHONY: dist-linux-aarch64
dist-linux-aarch64: clean build-fpc-linux-aarch64
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-aarch64 \
	  FPC_DEFAULT='$(FPC_LINUX_AARCH64)' \
	  ADD_PASDOC_GUI=t LAZBUILD_OPTIONS='--operating-system=linux --cpu=aarch64'

.PHONY: dist-amiga
dist-amiga: clean build-fpc-amiga
	$(MAKE) --no-print-directory \
	  dist-zip PACKAGE_BASENAME_SUFFIX=amiga-m68k \
	  FPC_DEFAULT='$(FPC_AMIGA_M68K)'

.PHONY: dist-linux-ppc
dist-linux-ppc: clean build-fpc-linux-ppc
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=linux-ppc \
	  FPC_DEFAULT='$(FPC_LINUX_PPC)'

.PHONY: dist-freebsd-x86
dist-freebsd-x86: clean build-fpc-freebsd-x86
	$(MAKE) --no-print-directory \
	  dist-tar-gz PACKAGE_BASENAME_SUFFIX=freebsd-x86 \
	  FPC_DEFAULT='$(FPC_FREEBSD_X86)'

.PHONY: dist-darwin-x86
dist-darwin-x86: clean build-fpc-darwin-x86
	$(MAKE) --no-print-directory \
	  dist-zip PACKAGE_BASENAME_SUFFIX=darwin-x86 \
	  FPC_DEFAULT='$(FPC_DARWIN_X86)' \
	  ADD_PASDOC_GUI=t PASDOC_GUI_BUNDLE=t LAZBUILD_OPTIONS='--operating-system=darwin --cpu=i386'

.PHONY: dist-darwin-x86_64
dist-darwin-x86_64: clean build-fpc-darwin-x86_64
	$(MAKE) --no-print-directory \
	  dist-zip PACKAGE_BASENAME_SUFFIX=darwin-x86_64 \
	  FPC_DEFAULT='$(FPC_DARWIN_X86_64)' \
	  ADD_PASDOC_GUI=t PASDOC_GUI_BUNDLE=t LAZBUILD_OPTIONS='--operating-system=darwin --cpu=x86_64 --widgetset=cocoa'

SOURCE_PACKAGE_BASENAME := $(PACKAGENAME)-$(VERSION)-src

.PHONY: dist-src
dist-src:
	rm -Rf /tmp/pasdoc-src-temp
	mkdir -p /tmp/pasdoc-src-temp
	cp -R . /tmp/pasdoc-src-temp/pasdoc
	$(MAKE) clean -C /tmp/pasdoc-src-temp/pasdoc
# Exclude .cge-jenkins-lazarus and .cache that may happen because Jenkins
# runs this with Docker container with $HOME set to pasdoc dir.
	cd /tmp/pasdoc-src-temp/ && \
	  zip -r $(SOURCE_PACKAGE_BASENAME).zip \
	  --exclude='*/.git/*' \
	  --exclude='*/.cge-jenkins-lazarus/*' \
	  --exclude='*/.cache/*' \
	  --exclude='*.tar.gz' \
	  --exclude='*.zip' \
	  --exclude='*~' \
	  pasdoc
	mv /tmp/pasdoc-src-temp/$(SOURCE_PACKAGE_BASENAME).zip .