/
githubmirror
/
xmlsec
Обзор
Документация
Войти
/
githubmirror
/
xmlsec
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
1.3.6
xmlsec1.m4
172 строки
7 KB
Aleksey Sanin
fixed comment typos (Wolfgang Woehl)
24 ноя 2010, 09:03
24 ноя 2010, 09:03
87cf0c5
Код
Авторство
О чём код?
# # Configure paths for xmlsec1 # H. Ronsdorf 2006-02-03 # Adapted from: # dnl AM_PATH_XMLSEC1([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for libxmlsec1, and define XMLSEC1_CFLAGS and XMLSEC1_LIBS dnl AC_DEFUN([AM_PATH_XMLSEC1],[ AC_ARG_WITH(xmlsec1-prefix, AC_HELP_STRING( [--with-xmlsec1-prefix=PFX], [Prefix where libxmlsec1 is installed (optional)] ), xmlsec1_config_prefix="$withval", xmlsec1_config_prefix="" ) AC_ARG_WITH(xmlsec1-exec-prefix, AC_HELP_STRING( [--with-xmlsec1-exec-prefix=PFX], [Exec prefix where libxmlsec1 is installed (optional)] ), xmlsec1_config_exec_prefix="$withval", xmlsec1_config_exec_prefix="" ) AC_ARG_ENABLE(xmlsec1test, AC_HELP_STRING( [--disable-xmlsec1test], [Do not try to compile and run a test cSOAP program] ),, enable_xmlsec1test=yes ) if test x$xmlsec1_config_exec_prefix != x ; then xmlsec1_config_args="$xmlsec1_config_args --exec-prefix=$xmlsec1_config_exec_prefix" if test x${XMLSEC1_CONFIG+set} != xset ; then XMLSEC1_CONFIG=$xmlsec1_config_exec_prefix/bin/xmlsec1-config fi fi if test x$xmlsec1_config_prefix != x ; then xmlsec1_config_args="$xmlsec1_config_args --prefix=$xmlsec1_config_prefix" if test x${XMLSEC1_CONFIG+set} != xset ; then XMLSEC1_CONFIG=$xmlsec1_config_prefix/bin/xmlsec1-config fi fi AC_PATH_PROG(XMLSEC1_CONFIG, xmlsec1-config, no) min_xmlsec1_version=ifelse([$1], ,1.0.0,[$1]) AC_MSG_CHECKING(for libxmlsec1 - version >= $min_xmlsec1_version) no_xmlsec1="" if test "$XMLSEC1_CONFIG" = "no" ; then no_xmlsec1=yes else XMLSEC1_CFLAGS=`$XMLSEC1_CONFIG $xmlsec1_config_args --cflags` XMLSEC1_LIBS=`$XMLSEC1_CONFIG $xmlsec1_config_args --libs` xmlsec1_config_major_version=`$XMLSEC1_CONFIG $xmlsec1_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` xmlsec1_config_minor_version=`$XMLSEC1_CONFIG $xmlsec1_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` xmlsec1_config_micro_version=`$XMLSEC1_CONFIG $xmlsec1_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_xmlsec1test" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $XMLSEC1_CFLAGS" LIBS="$XMLSEC1_LIBS $LIBS" dnl dnl Now check if the installed libxmlsec1 is sufficiently new. dnl (Also sanity checks the results of xmlsec1-config to some extent) dnl rm -f conf.xmlsec1test AC_TRY_RUN([ #include <stdlib.h> #include <stdio.h> #include <string.h> #include <libxml/tree.h> #include <xmlsec/xmlsec.h> int main(int argc, char **argv) { int major, minor, micro; char *tmp_version; system("touch conf.xmlsec1test"); /* Capture xmlsec1-config output via autoconf/configure variables */ /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = (char *)strdup("$min_xmlsec1_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string from xmlsec1-config\n", "$min_xmlsec1_version"); exit(1); } free(tmp_version); /* Test that the library is greater than our minimum version */ if (($xmlsec1_config_major_version < major) || (($xmlsec1_config_major_version == major) && ($xmlsec1_config_minor_version < minor)) || (($xmlsec1_config_major_version == major) && ($xmlsec1_config_minor_version == minor) && ($xmlsec1_config_micro_version < micro))) { printf("\n*** An old version of libxmlsec1 (%d.%d.%d) was found.\n", $xmlsec1_config_major_version, $xmlsec1_config_minor_version, $xmlsec1_config_micro_version); printf("*** You need a version of libxmlsec1 newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** libxmlsec1 is always available from http://xmlsec1.sf.net.\n\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the xmlsec1-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of libxmlsec1, but you can also set the XMLSEC1_CONFIG environment to point to the\n"); printf("*** correct copy of xmlsec1-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); return 1; } else { return 0; } } ],, no_xmlsec1=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_xmlsec1" = x ; then AC_MSG_RESULT(yes (version $xmlsec1_config_major_version.$xmlsec1_config_minor_version.$xmlsec1_config_micro_version)) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$XMLSEC1_CONFIG" = "no" ; then echo "*** The xmlsec1-config script installed by LIBXMLSEC1 could not be found" echo "*** If libxmlsec1 was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the XMLSEC1_CONFIG environment variable to the" echo "*** full path to xmlsec1-config." else if test -f conf.xmlsec1test ; then : else echo "*** Could not run libxmlsec1 test program, checking why..." CFLAGS="$CFLAGS $XMLSEC1_CFLAGS" LIBS="$LIBS $XMLSEC1_LIBS" AC_TRY_LINK([ #include <libxmlsec1/version.h> #include <stdio.h> ], [ soap_client_destroy(); return 0;], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding LIBXMLSEC1 or finding the wrong" echo "*** version of LIBXMLSEC1. If it is not finding LIBXMLSEC1, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means LIBXMLSEC1 was incorrectly installed" echo "*** or that you have moved LIBXMLSEC1 since it was installed. In the latter case, you" echo "*** may want to edit the xmlsec1-config script: $XMLSEC1_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi XMLSEC1_CFLAGS="" XMLSEC1_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(XMLSEC1_CFLAGS) AC_SUBST(XMLSEC1_LIBS) rm -f conf.xmlsec1test ])