githubmirror/tesseract

src/ccstruct/stepblob.cpp
540 строк19 KB
Sadra Barikbin
A few typo fix
26 апр 2024, 08:48
26 апр 2024, 08:4877c99e0
/**********************************************************************
 * File:        stepblob.cpp  (Formerly cblob.c)
 * Description: Code for C_BLOB class.
 * Author:      Ray Smith
 *
 * (C) Copyright 1991, Hewlett-Packard Ltd.
 ** Licensed under the Apache License, Version 2.0 (the "License");
 ** you may not use this file except in compliance with the License.
 ** You may obtain a copy of the License at
 ** http://www.apache.org/licenses/LICENSE-2.0
 ** Unless required by applicable law or agreed to in writing, software
 ** distributed under the License is distributed on an "AS IS" BASIS,
 ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 ** See the License for the specific language governing permissions and
 ** limitations under the License.
 *
 **********************************************************************/

// Include automatically generated configuration file if running autoconf.
#ifdef HAVE_CONFIG_H
#  include "config_auto.h"
#endif

#include "stepblob.h"

#include "points.h" // for operator+=, FCOORD, ICOORD

#include <allheaders.h> // for pixCreate, pixGetDepth
#include <vector>       // for std::vector

namespace tesseract {

class DENORM;

// Max perimeter to width ratio for a baseline position above box bottom.
const double kMaxPerimeterWidthRatio = 8.0;

/**********************************************************************
 * position_outline
 *
 * Position the outline in the given list at the relevant place
 * according to its nesting.
 **********************************************************************/
static void position_outline( // put in place
    C_OUTLINE *outline,       // thing to place
    C_OUTLINE_LIST *destlist  // destination list
) {
  C_OUTLINE_IT it = destlist; // iterator
                              // iterator on children
  C_OUTLINE_IT child_it = outline->child();

  if (!it.empty()) {
    do {
      // outline from dest list
      C_OUTLINE *dest_outline = it.data(); // get destination
                                // encloses dest
      if (*dest_outline < *outline) {
        // take off list
        dest_outline = it.extract();
        // put this in place
        it.add_after_then_move(outline);
        // make it a child
        child_it.add_to_end(dest_outline);
        while (!it.at_last()) {
          it.forward(); // do rest of list
                        // check for other children
          dest_outline = it.data();
          if (*dest_outline < *outline) {
            // take off list
            dest_outline = it.extract();
            child_it.add_to_end(dest_outline);
            // make it a child
            if (it.empty()) {
              break;
            }
          }
        }
        return; // finished
      }
      // enclosed by dest
      else if (*outline < *dest_outline) {
        position_outline(outline, dest_outline->child());
        // place in child list
        return; // finished
      }
      it.forward();
    } while (!it.at_first());
  }
  it.add_to_end(outline); // at outer level
}

/**********************************************************************
 * plot_outline_list
 *
 * Draw a list of outlines in the given colour and their children
 * in the child colour.
 **********************************************************************/

#ifndef GRAPHICS_DISABLED
static void plot_outline_list(     // draw outlines
    C_OUTLINE_LIST *list,          // outline to draw
    ScrollView *window,            // window to draw in
    ScrollView::Color colour,      // colour to use
    ScrollView::Color child_colour // colour of children
) {
  C_OUTLINE *outline;     // current outline
  C_OUTLINE_IT it = list; // iterator

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    outline = it.data();
    // draw it
    outline->plot(window, colour);
    if (!outline->child()->empty()) {
      plot_outline_list(outline->child(), window, child_colour, child_colour);
    }
  }
}
// Draws the outlines in the given colour, and child_colour, normalized
// using the given denorm, making use of sub-pixel accurate information
// if available.
static void plot_normed_outline_list(const DENORM &denorm, C_OUTLINE_LIST *list,
                                     ScrollView::Color colour, ScrollView::Color child_colour,
                                     ScrollView *window) {
  C_OUTLINE_IT it(list);
  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    outline->plot_normed(denorm, colour, window);
    if (!outline->child()->empty()) {
      plot_normed_outline_list(denorm, outline->child(), child_colour, child_colour, window);
    }
  }
}
#endif

/**********************************************************************
 * reverse_outline_list
 *
 * Reverse a list of outlines and their children.
 **********************************************************************/

static void reverse_outline_list(C_OUTLINE_LIST *list) {
  C_OUTLINE_IT it = list; // iterator

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    outline->reverse(); // reverse it
    outline->set_flag(COUT_INVERSE, true);
    if (!outline->child()->empty()) {
      reverse_outline_list(outline->child());
    }
  }
}

/**********************************************************************
 * C_BLOB::C_BLOB
 *
 * Constructor to build a C_BLOB from a list of C_OUTLINEs.
 * The C_OUTLINEs are not copied so the source list is emptied.
 * The C_OUTLINEs are nested correctly in the blob.
 **********************************************************************/

C_BLOB::C_BLOB(C_OUTLINE_LIST *outline_list) {
  for (C_OUTLINE_IT ol_it(outline_list); !ol_it.empty(); ol_it.forward()) {
    C_OUTLINE *outline = ol_it.extract();
    // Position this outline in appropriate position in the hierarchy.
    position_outline(outline, &outlines);
  }
  CheckInverseFlagAndDirection();
}

// Simpler constructor to build a blob from a single outline that has
// already been fully initialized.
C_BLOB::C_BLOB(C_OUTLINE *outline) {
  C_OUTLINE_IT it(&outlines);
  it.add_to_end(outline);
}

// Builds a set of one or more blobs from a list of outlines.
// Input: one outline on outline_list contains all the others, but the
// nesting and order are undefined.
// If good_blob is true, the blob is added to good_blobs_it, unless
// an illegal (generation-skipping) parent-child relationship is found.
// If so, the parent blob goes to bad_blobs_it, and the immediate children
// are promoted to the top level, recursively being sent to good_blobs_it.
// If good_blob is false, all created blobs will go to the bad_blobs_it.
// Output: outline_list is empty. One or more blobs are added to
// good_blobs_it and/or bad_blobs_it.
void C_BLOB::ConstructBlobsFromOutlines(bool good_blob, C_OUTLINE_LIST *outline_list,
                                        C_BLOB_IT *good_blobs_it, C_BLOB_IT *bad_blobs_it) {
  // List of top-level outlines with correctly nested children.
  C_OUTLINE_LIST nested_outlines;
  for (C_OUTLINE_IT ol_it(outline_list); !ol_it.empty(); ol_it.forward()) {
    C_OUTLINE *outline = ol_it.extract();
    // Position this outline in appropriate position in the hierarchy.
    position_outline(outline, &nested_outlines);
  }
  // Check for legal nesting and reassign as required.
  for (C_OUTLINE_IT ol_it(&nested_outlines); !ol_it.empty(); ol_it.forward()) {
    C_OUTLINE *outline = ol_it.extract();
    bool blob_is_good = good_blob;
    if (!outline->IsLegallyNested()) {
      // The blob is illegally nested.
      // Mark it bad, and add all its children to the top-level list.
      blob_is_good = false;
      ol_it.add_list_after(outline->child());
    }
    auto *blob = new C_BLOB(outline);
    // Set inverse flag and reverse if needed.
    blob->CheckInverseFlagAndDirection();
    // Put on appropriate list.
    if (!blob_is_good && bad_blobs_it != nullptr) {
      bad_blobs_it->add_after_then_move(blob);
    } else {
      good_blobs_it->add_after_then_move(blob);
    }
  }
}

// Sets the COUT_INVERSE flag appropriately on the outlines and their
// children recursively, reversing the outlines if needed so that
// everything has an anticlockwise top-level.
void C_BLOB::CheckInverseFlagAndDirection() {
  C_OUTLINE_IT ol_it(&outlines);
  for (ol_it.mark_cycle_pt(); !ol_it.cycled_list(); ol_it.forward()) {
    C_OUTLINE *outline = ol_it.data();
    if (outline->turn_direction() < 0) {
      outline->reverse();
      reverse_outline_list(outline->child());
      outline->set_flag(COUT_INVERSE, true);
    } else {
      outline->set_flag(COUT_INVERSE, false);
    }
  }
}

// Build and return a fake blob containing a single fake outline with no
// steps.
C_BLOB *C_BLOB::FakeBlob(const TBOX &box) {
  C_OUTLINE_LIST outlines;
  C_OUTLINE::FakeOutline(box, &outlines);
  return new C_BLOB(&outlines);
}

/**********************************************************************
 * C_BLOB::bounding_box
 *
 * Return the bounding box of the blob.
 **********************************************************************/

TBOX C_BLOB::bounding_box() const { // bounding box
  // This is a read-only iteration of the outlines.
  C_OUTLINE_IT it = const_cast<C_OUTLINE_LIST *>(&outlines);
  TBOX box; // bounding box

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    box += outline->bounding_box();
  }
  return box;
}

/**********************************************************************
 * C_BLOB::area
 *
 * Return the area of the blob.
 **********************************************************************/

int32_t C_BLOB::area() {       // area
  C_OUTLINE_IT it = &outlines; // outlines of blob
  int32_t total = 0;           // total area

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    total += outline->area();
  }
  return total;
}

/**********************************************************************
 * C_BLOB::perimeter
 *
 * Return the perimeter of the top and 2nd level outlines.
 **********************************************************************/

int32_t C_BLOB::perimeter() {
  C_OUTLINE_IT it = &outlines; // outlines of blob
  int32_t total = 0;           // total perimeter

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    total += outline->perimeter();
  }
  return total;
}

/**********************************************************************
 * C_BLOB::outer_area
 *
 * Return the area of the blob.
 **********************************************************************/

int32_t C_BLOB::outer_area() { // area
  C_OUTLINE_IT it = &outlines; // outlines of blob
  int32_t total = 0;           // total area

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    total += outline->outer_area();
  }
  return total;
}

/**********************************************************************
 * C_BLOB::count_transitions
 *
 * Return the total x and y maxes and mins in the blob.
 * Child outlines are not counted.
 **********************************************************************/

int32_t C_BLOB::count_transitions( // area
    int32_t threshold              // on size
) {
  C_OUTLINE_IT it = &outlines; // outlines of blob
  int32_t total = 0;           // total area

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    total += outline->count_transitions(threshold);
  }
  return total;
}

/**********************************************************************
 * C_BLOB::move
 *
 * Move C_BLOB by vector
 **********************************************************************/

void C_BLOB::move(   // reposition blob
    const ICOORD vec // by vector
) {
  C_OUTLINE_IT it(&outlines); // iterator

  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    it.data()->move(vec); // move each outline
  }
}

// Static helper for C_BLOB::rotate to allow recursion of child outlines.
static void RotateOutlineList(const FCOORD &rotation, C_OUTLINE_LIST *outlines) {
  C_OUTLINE_LIST new_outlines;
  C_OUTLINE_IT src_it(outlines);
  C_OUTLINE_IT dest_it(&new_outlines);
  while (!src_it.empty()) {
    C_OUTLINE *old_outline = src_it.extract();
    src_it.forward();
    auto *new_outline = new C_OUTLINE(old_outline, rotation);
    if (!old_outline->child()->empty()) {
      RotateOutlineList(rotation, old_outline->child());
      C_OUTLINE_IT child_it(new_outline->child());
      child_it.add_list_after(old_outline->child());
    }
    delete old_outline;
    dest_it.add_to_end(new_outline);
  }
  src_it.add_list_after(&new_outlines);
}

/**********************************************************************
 * C_BLOB::rotate
 *
 * Rotate C_BLOB by rotation.
 * Warning! has to rebuild all the C_OUTLINEs.
 **********************************************************************/
void C_BLOB::rotate(const FCOORD &rotation) {
  RotateOutlineList(rotation, &outlines);
}

// Helper calls ComputeEdgeOffsets or ComputeBinaryOffsets recursively on the
// outline list and its children.
static void ComputeEdgeOffsetsOutlineList(int threshold, Image pix, C_OUTLINE_LIST *list) {
  C_OUTLINE_IT it(list);
  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    if (pix != nullptr && pixGetDepth(pix) == 8) {
      outline->ComputeEdgeOffsets(threshold, pix);
    } else {
      outline->ComputeBinaryOffsets();
    }
    if (!outline->child()->empty()) {
      ComputeEdgeOffsetsOutlineList(threshold, pix, outline->child());
    }
  }
}

// Adds sub-pixel resolution EdgeOffsets for the outlines using greyscale
// if the supplied pix is 8-bit or the binary edges if nullptr.
void C_BLOB::ComputeEdgeOffsets(int threshold, Image pix) {
  ComputeEdgeOffsetsOutlineList(threshold, pix, &outlines);
}

// Estimates and returns the baseline position based on the shape of the
// outlines.
// We first find the minimum y-coord (y_mins) at each x-coord within the blob.
// If there is a run of some y or y+1 in y_mins that is longer than the total
// number of positions at bottom or bottom+1, subject to the additional
// condition that at least one side of the y/y+1 run is higher than y+1, so it
// is not a local minimum, then y, not the bottom, makes a good candidate
// baseline position for this blob. Eg
//   |                  ---|
//   |                  |
//   |-      -----------|        <=  Good candidate baseline position.
//    |-    -|
//     |   -|
//     |---|                     <=  Bottom of blob
int16_t C_BLOB::EstimateBaselinePosition() {
  TBOX box = bounding_box();
  int left = box.left();
  int width = box.width();
  int bottom = box.bottom();
  if (outlines.empty() || perimeter() > width * kMaxPerimeterWidthRatio) {
    return bottom; // This is only for non-CJK blobs.
  }
  // Get the minimum y coordinate at each x-coordinate.
  std::vector<int> y_mins(width + 1, box.top());
  C_OUTLINE_IT it(&outlines);
  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    ICOORD pos = outline->start_pos();
    for (int s = 0; s < outline->pathlength(); ++s) {
      if (pos.y() < y_mins[pos.x() - left]) {
        y_mins[pos.x() - left] = pos.y();
      }
      pos += outline->step(s);
    }
  }
  // Find the total extent of the bottom or bottom + 1.
  int bottom_extent = 0;
  for (int x = 0; x <= width; ++x) {
    if (y_mins[x] == bottom || y_mins[x] == bottom + 1) {
      ++bottom_extent;
    }
  }
  // Find the lowest run longer than the bottom extent that is not the bottom.
  int best_min = box.top();
  int prev_run = 0;
  int prev_y = box.top();
  int prev_prev_y = box.top();
  for (int x = 0; x < width; x += prev_run) {
    // Find the length of the current run.
    int y_at_x = y_mins[x];
    int run = 1;
    while (x + run <= width && y_mins[x + run] == y_at_x) {
      ++run;
    }
    if (y_at_x > bottom + 1) {
      // Possible contender.
      int total_run = run;
      // Find extent of current value or +1 to the right of x.
      while (x + total_run <= width &&
             (y_mins[x + total_run] == y_at_x || y_mins[x + total_run] == y_at_x + 1)) {
        ++total_run;
      }
      // At least one end has to be higher so it is not a local max.
      if (prev_prev_y > y_at_x + 1 || x + total_run > width || y_mins[x + total_run] > y_at_x + 1) {
        // If the prev_run is at y + 1, then we can add that too. There cannot
        // be a suitable run at y before that or we would have found it already.
        if (prev_run > 0 && prev_y == y_at_x + 1) {
          total_run += prev_run;
        }
        if (total_run > bottom_extent && y_at_x < best_min) {
          best_min = y_at_x;
        }
      }
    }
    prev_run = run;
    prev_prev_y = prev_y;
    prev_y = y_at_x;
  }
  return best_min == box.top() ? bottom : best_min;
}

static void render_outline_list(C_OUTLINE_LIST *list, int left, int top, Image pix) {
  C_OUTLINE_IT it(list);
  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    outline->render(left, top, pix);
    if (!outline->child()->empty()) {
      render_outline_list(outline->child(), left, top, pix);
    }
  }
}

static void render_outline_list_outline(C_OUTLINE_LIST *list, int left, int top, Image pix) {
  C_OUTLINE_IT it(list);
  for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
    C_OUTLINE *outline = it.data();
    outline->render_outline(left, top, pix);
  }
}

// Returns a Pix rendering of the blob. pixDestroy after use.
Image C_BLOB::render() {
  TBOX box = bounding_box();
  Image pix = pixCreate(box.width(), box.height(), 1);
  render_outline_list(&outlines, box.left(), box.top(), pix);
  return pix;
}

// Returns a Pix rendering of the outline of the blob. (no fill).
// pixDestroy after use.
Image C_BLOB::render_outline() {
  TBOX box = bounding_box();
  Image pix = pixCreate(box.width(), box.height(), 1);
  render_outline_list_outline(&outlines, box.left(), box.top(), pix);
  return pix;
}

/**********************************************************************
 * C_BLOB::plot
 *
 * Draw the C_BLOB in the given colour.
 **********************************************************************/

#ifndef GRAPHICS_DISABLED
void C_BLOB::plot(ScrollView *window,               // window to draw in
                  ScrollView::Color blob_colour,    // main colour
                  ScrollView::Color child_colour) { // for holes
  plot_outline_list(&outlines, window, blob_colour, child_colour);
}
// Draws the blob in the given colour, and child_colour, normalized
// using the given denorm, making use of sub-pixel accurate information
// if available.
void C_BLOB::plot_normed(const DENORM &denorm, ScrollView::Color blob_colour,
                         ScrollView::Color child_colour, ScrollView *window) {
  plot_normed_outline_list(denorm, &outlines, blob_colour, child_colour, window);
}
#endif

} // namespace tesseract