githubmirror/sudo

scripts/build_pkgs
1 329 строк37 KB
Todd C. Miller
Add basic support for remote power on/off via net-snmp.
20 апр 2023, 02:48
20 апр 2023, 02:48e2243e3
#!/usr/bin/env perl
#
# Build sudo packages on the various build hosts and copy back artifacts.
# Uses the ssh agent to avoid prompting for password when connecting.
# This script is used to build sudo release packages and probably not
# useful for anything else.

use strict;
use warnings;
use Fcntl ":flock";
use File::Temp ":mktemp";
use FileHandle;
use Getopt::Long qw(:config no_ignore_case bundling);
use IO::Socket::IP -register;
use IPC::Run qw(harness start pump finish run timeout);
use POSIX qw(setsid :sys_wait_h :signal_h);
use Parse::CPAN::Meta;
use Pod::Usage;

my $checklogs = 0;
my $cleanup_only = 0;
my $conf_file = 'build_pkgs.conf';
my $debug = 0;
my $help = 0;
my $ignore_cache = 0;
my $quiet = 0;
my $repo = "/repos/sudo";
my $rev = "tip";
my $sudo_tmpdir;
my $tarball;
my $tarball_base;
my $verbose = 0;
my $main_pid = $$;

GetOptions("check-logs" => \$checklogs,
	   "cleanup" => \$cleanup_only,
	   "config|c=s" => \$conf_file,
	   "debug|d" => \$debug,
	   "help|h" => \$help,
	   "quiet|q" => \$quiet,
	   "verbose|v" => \$verbose,
	   "ignore-cache|i" => \$ignore_cache,
	   "file|f=s" => \$tarball,
	   "repository|R=s" => \$repo,
	   "revision|r=s" => \$rev)
	   or pod2usage(2);
pod2usage(1) if $help;

# Debug and verbose override quiet.
$verbose = 1 if $debug;
$quiet = 0 if $verbose;

# Read config data (using Parse::CPAN::Meta is cheating a bit).
my @yaml = Parse::CPAN::Meta->load_file($conf_file) ||
    die "$0: unable to read $conf_file: $!\n";
die "$0: missing required home setting in $conf_file\n"
    unless (defined($yaml[0]) && exists $yaml[0]->{'home'});
die "$0: missing required platforms setting in $conf_file\n"
    unless (defined($yaml[0]) && exists $yaml[0]->{'platforms'});
my $configs = $yaml[0]->{'platforms'};

# If no platforms were specified on the command line, build everything.
my @platforms;
if (scalar @ARGV != 0) {
    foreach (@ARGV) {
	die "Unknown platform $_\n" unless exists $configs->{$_};
	push(@platforms, $_);
    }
} else {
    @platforms = keys %{$configs};
}

my $top = $yaml[0]->{'home'};
my $artifacts = $yaml[0]->{'artifacts'} // "${top}/artifacts";
my $logs = $yaml[0]->{'logs'} // "${top}/logs";
my $sockets = "${top}/connections";
my $cache = "${top}/cache";
my $exiting = 0;
my $failed_jobs = 0;
my $build_script = $yaml[0]->{'build_script'};
my $test_script = $yaml[0]->{'test_script'};
my ($build_script_base, $test_script_base, $srcdir, $sudo_version);

# In check-only mode just grep the build logs.
check_logs() if $checklogs;

# Start ssh agent if one is not already running.
my $agent_pid = start_ssh_agent();

unless ($cleanup_only) {
    # If no tarball specified, create an archive from the repo.
    $sudo_tmpdir = mkdtemp("/var/tmp/sudo-XXXXXXXX") ||
	die "$0: unable to create temporary directory: $!\n";
    if (defined($tarball)) {
	warn "$0: building packages from $tarball\n";
	die "$0: can't access $tarball\n" unless -f $tarball;
    } else {
	warn "$0: building packages from $rev of $repo\n";
	$tarball = create_tarball() ||
	    die "$0: unable to create tarball from $repo\n";
    }
    $tarball =~ m:^(.*/)?([^/]+)$:;
    $tarball_base = $2;

    # Find top-level source directory in tarball
    $srcdir = `tar -ztf $tarball | sed 1q`;
    chomp($srcdir);
    $srcdir =~ s:/.*::;
    die "$0: unable to determine source dir from tarball\n" unless $srcdir;
    if ($srcdir =~ /^sudo-(.*)$/) {
	$sudo_version = $1;
    } else {
	$sudo_version = $rev;
    }

    # If no build or test script specified, use defaults.
    $build_script = default_build_script() unless defined($build_script);
    $build_script =~ m:^(.*/)?([^/]+)$:;
    $build_script_base = $2;
    $test_script = default_test_script() unless defined($test_script);
    $test_script =~ m:^(.*/)?([^/]+)$:;
    $test_script_base = $2;

    # Create required directories
    foreach my $dir (sort $top, $artifacts, $cache, $logs, $sockets, "$artifacts/$sudo_version") {
	unless (-d $dir) {
	    mkdir($dir, 0755) || die "$0: unable to mkdir $dir: $!\n";
	}
    }
    $artifacts .= "/$sudo_version";
}

# Linux and SYSV don't support SIGINFO
my $INFO = "INFO";
$INFO = "USR1" unless exists $SIG{INFO};

$SIG{$INFO} = \&info;
$SIG{HUP} = \&shut_down;
$SIG{INT} = \&shut_down;
$SIG{QUIT} = \&shut_down;
$SIG{TERM} = \&shut_down;
$SIG{__DIE__} = \&die_hook;

# Prevent macOS from going to sleep while we are running.
system("/usr/bin/caffeinate -i -w $main_pid") if -x "/usr/bin/caffeinate";

# Keep track of which platforms belong to which VM server.
my %pdu_servers;
my %vm_servers;
my %active_hosts;
foreach my $platform (@platforms) {
    my $conf = $configs->{$platform};

    if (exists $conf->{'vm_host'}) {
	my $vm_host = $conf->{'vm_host'};
	push(@{$vm_servers{$vm_host}}, $conf);
    }
    # Track the number of times an ssh host is used
    $active_hosts{$conf->{'ssh_host'}}++;

    if (exists $conf->{'pdu_server'} && exists $conf->{'pdu_oid'}) {
	my $agent = $conf->{"pdu_server"};
	my $oid = $conf->{"pdu_oid"};
	push(@{$pdu_servers{$agent, $oid}}, $conf);
    }
}

# Open persistent ssh connections to VM servers
foreach my $server (keys %vm_servers) {
    $active_hosts{$server} = 1 if open_persistent_connection($server) == 0;
}

# Power on VMs as needed
foreach my $vm_host (keys %vm_servers) {
    my $vm_confs = $vm_servers{$vm_host};
    delete $vm_servers{$vm_host};
    while (my $conf = pop @{$vm_confs}) {
	if (!vm_is_running($vm_host, $conf)) {
	    if (vm_poweron($vm_host, $conf)) {
		push(@{$vm_servers{$vm_host}}, $conf);
	    } else {
		warn "unable to start VM " . $conf->{'ssh_host'} . " on $vm_host";
	    }
	}
    }
}

# Power on servers connected to a PDU as needed
foreach my $pdu_host (keys %pdu_servers) {
    my $pdu_confs = $pdu_servers{$pdu_host};
    delete $pdu_servers{$pdu_host};
    while (my $conf = pop @{$pdu_confs}) {
	if (!pdu_is_running($pdu_host, $conf)) {
	    if (pdu_poweron($pdu_host, $conf)) {
		push(@{$pdu_servers{$pdu_host}}, $conf);
	    } else {
		my ($agent, $oid) = split(/$;/, $pdu_host);
		warn "unable to start server " . $conf->{'ssh_host'} . " on $agent ($oid)";
	    }
	}
    }
}

# We want to catch the jobs as they finish but not any of the other
# commands started via run() or system() above.
$SIG{CHLD} = \&reaper;

# We limit the number of concurrent jobs a single host can support.
# In the future, this may be set on a per-host basis.
# If a host already is at the limit, we queue the job until a worker
# for that host completes.
my %workers;
my %concurrency;
my $max_jobs = $yaml[0]->{'max_jobs'} // 2;

foreach my $platform (@platforms) {
    my $conf = $configs->{$platform};
    if (!exists $conf->{'ssh_host'}) {
	warn "$platform: ssh_host not defined\n";
	return;
    }

    run_job($platform, $conf);
}

print "Waiting for workers to finish...\n" if $verbose;
while (scalar(keys %workers) != 0) {
    # This sleep will be interrupted by SIGCHLD
    sleep(5);
}

# Disable reaper now that we've waited for our children
$SIG{CHLD} = undef;

# Summarize results
if (!$quiet && !$cleanup_only) {
    printf("%-16s%-16s%s\n", "Platform", "Build", "Test");
    foreach my $platform (@platforms) {
	my $conf = $configs->{$platform};
	printf("%-16s%-16s%s\n", $platform, $conf->{'status_build'},
	    $conf->{'status_test'});
    }
}

exit($failed_jobs);

# Signal handler for worker to kill existing jobs.
sub worker_cleanup {
    my $signo = shift;

    # Avoid warnings when we kill the worker jobs
    $exiting = $signo;

    # Kill everything else in our process group (ssh jobs, etc)
    $SIG{$signo} = "IGNORE";
    kill($signo, -getpgrp());

    # Worker will clean up and exit
    sleep 1;

    # Restore default handler so parent can kill us if cleanup fails
    $SIG{$signo} = "DEFAULT";
}

# Connect to build host and remove stale temporary directories.
sub cleanup_build_dir {
    my ($host, $conf) = @_;

    # Wait for VM to power on
    if (exists $conf->{"vm_host"} || exists $conf->{"pdu_server"}) {
	die "unable to connect to $host\n" unless wait_for_ssh($conf);
    }

    # Remove any remove temporary directories
    my $status = run_remote_command($conf, "rm -rf sudo_build.????????",
	\*STDERR);
    exit($status >> 8);
}

# Run a build job for the platform or queue it if no worker is available.
sub run_job {
    my ($platform, $conf) = @_;
    my ($vm_host, $status, $logfile);
    my $host = $conf->{'ssh_host'};
    my $exit_value = 0;

    # Block signals during critical section
    my $sigset = POSIX::SigSet->new(SIGCHLD, SIGHUP, SIGINT, SIGTERM);
    my $oldsigset = POSIX::SigSet->new();
    sigprocmask(SIG_BLOCK, $sigset, $oldsigset);

    # Check max concurrent connections for the build host.
    if (exists $concurrency{$host} && $concurrency{$host}->{'jobs'} >= $max_jobs) {
	# Defer job until an existing build job completes.
	push(@{$concurrency{$host}->{'queue'}}, $platform);
	sigprocmask(SIG_SETMASK, $oldsigset);
	return;
    }
    $concurrency{$host}->{'jobs'}++;

    defined(my $child = fork) || die "Can't fork: $!\n";
    if ($child) {
	# Parent.  Stash pid to map child to host in reaper and return.
	$workers{$child} = { "platform" => $platform, "ssh_host" => $host };
	sigprocmask(SIG_SETMASK, $oldsigset);

	print "Started $platform \@ $host ($child)\n" if $verbose;
	return;
    }

    # Worker runs in its own session to simplify signal handling.
    setsid();

    # Update signal handlers for worker.
    $SIG{CHLD} = "DEFAULT";
    $SIG{HUP} = \&worker_cleanup;
    $SIG{$INFO} = "DEFAULT";
    $SIG{INT} = \&worker_cleanup;
    $SIG{TERM} = \&worker_cleanup;
    $SIG{__DIE__} = undef;
    sigprocmask(SIG_SETMASK, $oldsigset);

    # Show platform and ssh host in ps.
    $0 = "build_pkgs: $platform ($host)";

    # Cleanup and exit in --clean mode
    cleanup_build_dir($host, $conf) if $cleanup_only;

    # Output goes to log file
    if (!open(BUILDLOG, ">", "${logs}/${platform}.build")) {
	die "unable to create ${logs}/${platform}.build: $!\n";
    }
    my $now = localtime();
    print BUILDLOG "Build for ${platform} \@ ${host} started $now\n\n";

    # Wait for VM to power on
    if (exists $conf->{"vm_host"} || exists $conf->{"pdu_server"}) {
	if (!wait_for_ssh($conf)) {
	    print BUILDLOG "$platform: unable to connect to $host\n";
	    exit(1);
	}
    }

    # Create temporary directory on build host
    my $temporary;
    for (my $i = 0; $i < 20; $i++) {
	$temporary = mktemp("sudo_build.XXXXXXXX");
	$status = run_remote_command($conf, "mkdir $temporary", \*BUILDLOG);
	last if $status == 0;
    }
    if ($status != 0) {
	print BUILDLOG "unable to mkdir ${host}:${temporary}\n";
	exit(1);
    }

    my @files = ($build_script, $test_script, $tarball);
    printf BUILDLOG "copy %s -> %s:%s\n", join(' ', @files), $host, "$temporary/";
    $status = copy_to_remote(\@files, "$temporary/", $host, \*BUILDLOG,
	$conf->{"proxy_cmd"});
    if ($status != 0) {
	warn "$platform: unable to copy files to $host:$temporary/" unless $exiting;
	$exit_value = 1;
	goto remove_tmp;
    }

    # Copy config.cache file if there is one
    if (!$ignore_cache && -f "${cache}/config.cache.${platform}") {
	printf BUILDLOG "copy %s -> %s:%s\n",
	    "${cache}/config.cache.${platform}",
	    $host, "$temporary/config.cache";
	copy_to_remote("${cache}/config.cache.${platform}",
	    "$temporary/config.cache", $host, \*BUILDLOG,
	    $conf->{"proxy_cmd"});
    }

    # Unpack tarball and run build script.
    my $build_args = "";
    if (exists $conf->{"crossbuild"}) {
	# When cross-building, pass the target system on the command line.
	$build_args .= "--osversion " . $conf->{"crossbuild"} . " ";
    }
    if (!$ignore_cache) {
	# Name of the config.cache file, if using.
	$build_args .= "--cache-file config.cache ";
    }
    if (exists $conf->{"no_packages"} && $conf->{"no_packages"}) {
	$build_args .= "--no-packages ";
    }

    $status = run_remote_command($conf,
	"cd $temporary && ./$build_script_base ${build_args}$tarball_base",
	\*BUILDLOG);
    if ($status != 0) {
	warn "$platform: build failed on $host\n" unless $exiting;
	$exit_value = 2;
	goto remove_tmp;
    }

    if (!exists $conf->{'omit_artifacts'} || !$conf->{'omit_artifacts'}) {
	printf BUILDLOG "copy %s:%s -> %s\n", $host,
	    "$temporary/artifacts/*", $artifacts;
	$status = copy_from_remote("$temporary/artifacts/\*", $artifacts,
	    $host, \*BUILDLOG, $conf->{"proxy_cmd"});
	if ($status != 0) {
	    warn "$platform: unable to scp $host:$temporary/artifacts/* $artifacts" unless $exiting;
	    $exit_value = 4;
	    goto remove_tmp;
	}
    }

    # Update config.cache file if using.
    if (!$ignore_cache) {
	printf BUILDLOG "copy %s:%s -> %s\n", $host,
	    "$temporary/config.cache", "${cache}/config.cache.${platform}";
	$status = copy_from_remote("$temporary/config.cache",
	    "${cache}/config.cache.${platform}", $host,
	    \*BUILDLOG, $conf->{"proxy_cmd"});
    }

    $now = localtime();
    print BUILDLOG "\nBuild completed $now\n";

    # Run tests unless cross-compiling
    unless (exists $conf->{'crossbuild'}) {
	if (!open(TESTLOG, ">", "${logs}/${platform}.test")) {
	    warn "unable to create ${logs}/${platform}.test: $!\n";
	    $exit_value = 128;
	    goto remove_tmp;
	}
	print TESTLOG "Test started $now\n\n";
	$status = run_remote_command($conf,
	    "cd $temporary && ./$test_script_base $srcdir", \*TESTLOG, "-tt");
	print TESTLOG "\nTest completed $now\n";
	if ($status != 0) {
	    warn "$platform: test failure on $host\n" unless $exiting;
	    $exit_value = 129;
	}
	close(TESTLOG);
    }

    # Remove temporary build dir
remove_tmp:
    run_remote_command($conf, "rm -rf \"$temporary\"", \*BUILDLOG);
    close(BUILDLOG);

    exit($exit_value);
}

sub reaper {
    my $child;

    for (;;) {
	$child = waitpid(-1, WNOHANG);
	last if $child <= 0;

	if (exists $workers{$child}) {
	    my $w = $workers{$child};
	    my $platform = $w->{'platform'};
	    my $host = $w->{'ssh_host'};
	    my $conf = $configs->{$platform};
	    print "Finished $platform \@ $host ($child)\n" if $verbose;

	    # Check for warnings/errors in the log file
	    my @warnings = grep_log("${logs}/${platform}.build");
	    foreach (@warnings) {
		warn "$platform: $_\n";
	    }

	    if ($? == 0) {
		$conf->{'status_build'} = scalar @warnings ? "WARNING" : "SUCCESS";
		$conf->{'status_test'} =
		    $conf->{'crossbuild'} ? "N/A" : "SUCCESS";
	    } else {
		if (($? >> 8) < 128) {
		    # Build failed
		    $conf->{'status_build'} = "FAILED";
		    $conf->{'status_test'} = "N/A"
		} else {
		    # Build OK, test failed
		    $conf->{'status_build'} = scalar @warnings ? "WARNING" : "SUCCESS";
		    $conf->{'status_test'} = "FAILED";
		}
		$failed_jobs++;
	    }

	    # Remove the dead process
	    delete $workers{$child};

	    # One less worker is now using the host
	    $active_hosts{$host}--;
	    if ($active_hosts{$host} == 0) {
		# Close persistent connection if no longer needed
		close_persistent_connection($host);

		if (exists $conf->{'vm_host'}) {
		    my $vm_host = $conf->{'vm_host'};
		    if (exists $vm_servers{$vm_host}) {
			for (my $i = 0; $i < scalar @{$vm_servers{$vm_host}}; $i++) {
			    # Shut down now-unused VM and remove from list.
			    if (${$vm_servers{$vm_host}}[$i] eq $conf) {
				splice(@{$vm_servers{$vm_host}}, $i, 1);
				vm_shutdown($vm_host, $conf);
			    }
			}
		    }
                }
            }

	    # Check for deferred jobs if invoked via signal.
	    if (defined($_[0])) {
		$concurrency{$host}->{'jobs'}--;
		if (exists $concurrency{$host}->{'queue'}) {
		    if (int(@{$concurrency{$host}->{'queue'}})) {
			my $platform = pop(@{$concurrency{$host}->{'queue'}});
			run_job($platform, $configs->{$platform});
		    }
		}
	    }
	}
    }
    $SIG{CHLD} = \&reaper;
}

# Kill all workers and wait for them to finish.
# Note that the reaper is not called for the workers.
sub kill_workers {
    my $signame = shift;
    my @jobs = keys %workers;

    if (@jobs) {
	$SIG{CHLD} = undef;
	foreach (@jobs) {
	    kill($signame, $_);
	}
	sleep(2);
	foreach (@jobs) {
	    kill(SIGKILL, $_);
	}
	for (;;) {
	    last unless waitpid(-1, WNOHANG) > 0;
	}
    }
}

# Shut down cleanly on signal and exit.
sub shut_down {
    my $signame = shift;

    print "Shutting down...\n" if $verbose;

    kill_workers($signame);
    exit(1);
}

# Hook that is called when we die().
sub die_hook {
    # Don't do anything special if called from an eval block
    die @_ if $^S;

    kill_workers(SIGTERM);
}

# Signal handler for SIGINFO (or SIGUSR1 on non-BSD).
sub info {
    while (my ($host, $c) = each %concurrency) {
	if (exists $c->{'queue'}) {
	    foreach my $platform (@{$c->{'queue'}}) {
		warn "Queued $platform @ $host\n";
	    }
	}
    }
    while (my ($pid, $w) = each %workers) {
	my $platform = $w->{'platform'};
	my $host = $w->{'ssh_host'};
	warn "Running $platform @ $host ($pid)\n";
    }
    $SIG{$INFO} = \&info if defined($_[0]);
}

# Build up the ssh command line
sub ssh_cmdline {
    my ($host, $cmd, @opts) = @_;

    my @cmdline = qw(ssh -x -oPreferredAuthentications=publickey -oStrictHostKeyChecking=no -oServerAliveInterval=15 -oServerAliveCountMax=3);
    push(@cmdline, @opts) if @opts;
    push(@cmdline, $host);
    push(@cmdline, $cmd) if defined($cmd);

    @cmdline;
}

# Use scp to copy one or more files from local to remote
sub copy_to_remote {
    my ($src, $dst, $host, $output, $proxy) = @_;

    # Open persistent connection if needed
    unless (-S "$sockets/$host") {
	my $status = open_persistent_connection($host, $output, $proxy);
	return $status if $status != 0;
    }

    my @cmd = qw(scp -Bq -oPreferredAuthentications=publickey -oStrictHostKeyChecking=no);
    push(@cmd, "-oControlPath=$sockets/$host");
    push(@cmd, ref $src ? @$src : $src);
    push(@cmd, "$host:$dst");
    run(\@cmd, '<', \undef, '>&', $output, debug => $debug);

    return $?;
}

# Use scp to copy a file from remote to local
sub copy_from_remote {
    my ($src, $dst, $host, $output, $proxy) = @_;

    # Open persistent connection if needed
    unless (-S "$sockets/$host") {
	my $status = open_persistent_connection($host, $output, $proxy);
	return $status if $status != 0;
    }

    my @cmd = qw(scp -Bq -oPreferredAuthentications=publickey -oStrictHostKeyChecking=no);
    push(@cmd, "-oControlPath=$sockets/$host");
    push(@cmd, "$host:$src", $dst);
    run(\@cmd, '<', \undef, '>&', $output, debug => $debug);

    return $?;
}

# Run a command over ssh on the remote host and to output handle.
# A persistent connection is opened if one does not already exit.
sub run_remote_command {
    my ($conf, $cmd, $output, @opts) = @_;
    my $host = $conf->{'ssh_host'};
    my $sock_file = "$sockets/$host";
    my ($writer, $child);

    # Open persistent connection if needed
    unless (-S $sock_file) {
	my $status = open_persistent_connection($host, $output, $conf->{'proxy_cmd'});
	return $status if $status != 0;
    }

    # Run command in schroot if necessary
    if (exists $conf->{'schroot'}) {
	my $schroot = $conf->{'schroot'};
	# Wrap in a shell if command uses special characters
	if ($cmd =~ /[\$\{\}\[\]\&\|\;\?\*]/) {
	    $cmd =~ s/'/\\\'/g;
	    $cmd = "schroot -c $schroot -- sh -c '$cmd'";
	} else {
	    $cmd = "schroot -c $schroot -- $cmd";
	}
    }

    # No need for proxy here, the persistent connection handles it.
    # For tty mode, we need to allocate a pty and do things the hard way.
    my @cmdline = ssh_cmdline($host, $cmd, "-S", $sock_file, @opts);
    if (grep(@opts, "-t")) {
	my ($inbuf, $outbuf);
	my $h = harness(\@cmdline, '<pty<', \$inbuf, '>pty>', \$outbuf, debug => $debug);
	for (;;) {
	    pump $h;
	    if (defined($outbuf)) {
		$outbuf =~ s/\r+$//gm;
		print $output $outbuf;
		undef $outbuf;
	    }
	    last unless $h->pumpable;
	}
	$h->finish();
    } else {
	run(\@cmdline, '<', \undef, '>&', $output, debug => $debug);
    }

    return $?;
}

# Open a persistent connection to the specified host.
# The connection will persist until shut down.
sub open_persistent_connection {
    my ($dest, $output, $proxy) = @_;
    my ($outbuf, @cmdline);

    # Handle user@host form
    $dest =~ /([^@]+)$/;
    my $host = $1;

    my @ssh_opts = qw(-M -N -oControlPersist=yes);
    push(@ssh_opts, "-S", "$sockets/$host");
    push(@ssh_opts, "-oProxyCommand=$proxy") if defined($proxy);

    # Lock socket dir to prevent race conditions
    sysopen(SOCKDIR, $sockets, O_RDONLY) || die "$0: unable to open $sockets: $!\n";
    flock(SOCKDIR, LOCK_EX) || die "$0: unable to lock $sockets: $!\n";

    if (-S "$sockets/$host") {
	@cmdline = ("ssh", "-S", "$sockets/$host", "-Ocheck", $host);
	run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);
	if ($outbuf =~ /^Master running/) {
	    close(SOCKDIR);
	    return 0;
	}
	return 0 if $outbuf =~ /^Master running/;
	unlink("$sockets/$host");
    }

    @cmdline = ssh_cmdline($dest, undef, @ssh_opts);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);
    if (length($outbuf) > 0) {
	$output = \*STDERR unless defined($output);
	print $output $outbuf;
    }

    close(SOCKDIR);
    return $?;
}

# Close a persistent connection
sub close_persistent_connection {
    my $host = shift;
    my $ret = 1;

    # Strip off optional user@ if present.
    $host =~ s/^.*@//;

    if (-S "$sockets/$host") {
	my $outbuf;
	my @cmdline = ("ssh", "-S", "$sockets/$host", "-Oexit", $host);
	run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);
	$ret = 0 unless ($? == 0 && $outbuf =~ /Exit request sent/);
    }

    $ret;
}

# Close all active persistent connections.
sub close_persistent_connections {
    if (defined($sockets)) {
	foreach my $host (keys %active_hosts) {
	    close_persistent_connection($host);
	}
    }
}

sub vm_is_running {
    # vim-cmd vmsvc/power.getstate VMID
    my ($host, $conf) = @_;
    my @ssh_opts = ( "-S", "$sockets/$host" );
    my $ssh_host = $conf->{'ssh_host'};
    my $outbuf;

    my @cmdline = ssh_cmdline($host,
	"vim-cmd vmsvc/power.getstate " . $conf->{'vmid'}, @ssh_opts);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    $outbuf =~ /Powered on/;
}

sub vm_poweron {
    # vim-cmd vmsvc/power.on VMID
    my ($host, $conf) = @_;
    my @ssh_opts = ( "-S", "$sockets/$host" );
    my $ssh_host = $conf->{'ssh_host'};
    my $outbuf;

    printf("Powering on VM %s on %s\n", $ssh_host, $host) if $verbose;
    my @cmdline = ssh_cmdline($host,
	"vim-cmd vmsvc/power.on " . $conf->{'vmid'}, @ssh_opts);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    $outbuf =~ /Powering on VM/;
}

sub vm_shutdown {
    # vim-cmd vmsvc/power.shutdown VMID
    my ($host, $conf) = @_;
    my @ssh_opts = ( "-S", "$sockets/$host" );
    my $ssh_host = $conf->{'ssh_host'};
    my $outbuf;

    printf("Shutting down VM %s on %s\n", $ssh_host, $host) if $verbose;
    my @cmdline = ssh_cmdline($host,
	"vim-cmd vmsvc/power.shutdown " . $conf->{'vmid'}, @ssh_opts);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    # Check for, e.g. vim.fault.ToolsUnavailable or vim.fault.InvalidPowerState
    if ($outbuf =~ /vim\.fault\.ToolsUnavailable/) {
	# VM tools not installed, login directly to shut down
	if (exists $conf->{'shutdown'}) {
	    # login directly to shut down
	    @cmdline = ssh_cmdline($ssh_host, $conf->{'shutdown'}, "-S",
		"$sockets/$ssh_host");
	    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);
	} else {
	    warn "unable to shut down $ssh_host on $host: VM tools not installed\n";
	}
    } elsif ($outbuf =~ /vim\.fault\.InvalidPowerState/) {
	# Not powered on, ignore the error
	$outbuf = "";
    }
    $outbuf !~ /vim\.fault\./;
}

sub pdu_is_running {
    my ($host, $conf) = @_;
    my ($agent, $oid) = split(/$;/, $host);
    my $outbuf;

    # Assumes module name matches first level of OID
    my $module = $oid;
    $module =~ s/::.*//;

    my @cmdline = ("snmpget", "-m", "+$module", "-c", "public", "-v1",
	$agent, $oid);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    $outbuf =~ /:\s*1$/;
}

sub pdu_poweron {
    my ($host, $conf) = @_;
    my ($agent, $oid) = split(/$;/, $host);
    my $ssh_host = $conf->{'ssh_host'};
    my $outbuf;

    # Assumes module name matches first level of OID
    my $module = $oid;
    $module =~ s/::.*//;

    printf("Powering on %s via %s\n", $ssh_host, $agent) if $verbose;
    my @cmdline = ("snmpset", "-m", "+$module", "-c", "private", "-v1",
	$agent, $oid, "i", "1");
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    $outbuf =~ /:\s*1$/;
}

sub pdu_shutdown {
    my ($host, $conf) = @_;
    my ($agent, $oid) = split(/$;/, $host);
    my $ssh_host = $conf->{'ssh_host'};
    my @ssh_opts = ( "-S", "$sockets/$ssh_host" );
    my $outbuf;

    # Assumes module name matches first level of OID
    my $module = $oid;
    $module =~ s/::.*//;

    printf("Powering off %s via %s\n", $ssh_host, $agent) if $verbose;

    # Login via ssh to shut down (assume user can run poweroff w/o privs)
    my @cmdline = ssh_cmdline($ssh_host, 'poweroff', @ssh_opts);
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);
    # XXX - wait until we can't ping it?
    sleep(1);

    # Turn off power to the outlet using snmp
    @cmdline = ("snmpset", "-m", "+$module", "-c", "private", "-v1", $agent,
	$oid, "i", "0");
    run(\@cmdline, '<', \undef, '>&', \$outbuf, debug => $debug);

    $outbuf =~ /:\s*1$/;
}

# Try to connect to the specified port on the host looking for an SSH banner.
# Returns 1 on success, 0 on failure
sub ping_ssh {
    my ($host, $port) = @_;
    my $ret = 0;

    # Create socket and connect
    my $sock = IO::Socket::IP->new(
	PeerHost => $host,
	PeerPort => "$port",
	Timeout  => 20,
	Type     => SOCK_STREAM
    );

    if (defined($sock) && defined($_ = <$sock>)) {
	$ret = 1 if /^SSH/;
	close($sock);
    }

    return $ret;
}

sub wait_for_ssh {
    my $conf = shift;
    my $host = $conf->{'ssh_host'};
    my $port = 22;

    # Sleep until sshd is available (or we time out)
    my $sleeptime = 10;
    my $timeout = $sleeptime * 30;
    while ($timeout > 0) {
	sleep($sleeptime);
	$timeout -= $sleeptime;
	return 1 if ping_ssh($host, $port);
    }

    return 0;
}

# Create a tarball from an archive $repo
sub create_tarball {
    die "$0: unable to create directory $sudo_tmpdir/sudo: $!\n"
        unless mkdir("$sudo_tmpdir/sudo", 0755);
    system("hg archive -R $repo -r $rev --type=files $sudo_tmpdir/sudo && hg log -R $repo --template=changelog -r 'sort(branch(.) or follow(), -date)' > $sudo_tmpdir/sudo/ChangeLog && cd $sudo_tmpdir && sed -e 's/^/sudo\\//' -e 's/[ 	].*//' sudo/MANIFEST | GZIP=-9 pax -wz -x ustar -f sudo.tar.gz && rm -rf sudo");
    return $? ? undef : "$sudo_tmpdir/sudo.tar.gz";
}

sub start_ssh_agent {
    # Use existing agent if possible
    if (exists $ENV{'SSH_AUTH_SOCK'} && -S $ENV{'SSH_AUTH_SOCK'}) {
	return undef;
    }

    # Need to start a new agent and add keys
    my @cmdline = qw(ssh-agent -s);
    run(\@cmdline, '<', \undef, '>&', sub {
	$_ = shift;
	s/;[^;]*$//;
	my ($var, $val) = (/^([^=]+)=(.*)$/);
	if (defined($var) && defined($val)) {
	    $ENV{$var} = $val;
	}
    });
    system("ssh-add");

    return $ENV{'SSH_AGENT_PID'};
}

sub default_build_script {
    my $fname = "${sudo_tmpdir}/build.sh";
    open(my $fh, ">", $fname);
    print $fh <<~'EOF';
    #!/bin/sh
    configure_opts=
    while test $# != 0; do
        case "$1" in
        --cache-file)
            configure_opts="${configure_opts} --cache-file=../$2"
            shift 2
            ;;
        --osversion)
            osversion="$2"
            shift 2
            ;;
        --no-packages)
            configure_opts="${configure_opts} --build-only"
            shift
            ;;
        *)
            break
            ;;
            esac
    done

    if [ -z "$1" ] || [ \! -r "$1" ]; then
        echo "No tarball specified"
        exit 1
    fi
    gunzip -c $1 | tar xf -
    if [ $? -ne 0 ]; then
        echo "Unable to extract tarball"
        exit 1
    fi
    rm -f $1

    mkdir artifacts || exit 1

    # Assume src directory in tar file matches its name.
    sudodir="`echo $1|sed 's/.tar.gz$//'`"
    cd "$sudodir" || exit 1

    if [ -z "$osversion" ]; then
        osversion="`./scripts/pp --probe`"
    fi

    ./scripts/mkpkg $configure_opts --osversion="$osversion" || exit 1
    for f in *.rpm *.deb *.bff *.depot *.pkg *.txz ../artifacts; do
        if [ -f "$f" ]; then
            mv "$f" ../artifacts
        fi
    done
    EOF
    chmod(0755, $fh);
    close($fh);

    return $fname;
}

sub default_test_script {
    my $fname = "${sudo_tmpdir}/test.sh";
    open(my $fh, ">", $fname);
    print $fh <<~'EOF';
    #!/bin/sh
    if [ -z "$1" ]; then
        echo "usage: test.sh workdir"
        exit 1
    fi
    cd "$1" || exit 1
    exec make check
    EOF
    chmod(0755, $fh);
    close($fh);

    return $fname;
}

# Look for warnings/errors in the log file
sub grep_log {
    my $log = shift;
    my @warnings;

    if (open(my $fh, "<", $log)) {
	while (<$fh>) {
	    s/[\r\n]+$//;	# kill carriage returns too
	    s/\x1b\[[\d;]*m//g;	# remove escape codes
	    if (/[Ww]arning:|[Ee]rror:|\*\*\* |ftp: /) {
		# Some things we ignore
		next if /ermanently added .* to the list of known hosts/;
		next if /warning\/error mail subject/;
		next if /must be cleared at boot time|Clock skew detected|in the future|-no(-fast)?-install|remember to run 'libtool --finish|has not been installed in|relinking '/;
		# RPM warnings we don't care about
		next if /warning: (Installed .but unpackaged. file.s. found:|Deprecated external dependency generator is used!|absolute symlink)/;
		# Solaris ld may warn about the gcc dwarf2 unwinder
		next if /warning: unwind table: .* suspicious InitialLoc value 0: binary search table will be incomplete if section requires runtime relocation/;
		# Solaris Studio compiler warns about anonymous unions
		next if /warning: anonymous union declaration/;
		# HP-UX shl_t uses type-punning
		next if /sudo_dso.c:.*warning: type-punning to incomplete type might break strict-aliasing rules/;
		# Bogus HP-UX 11.23 warning about PTHREAD_MUTEX_INITIALIZER
		next if /arc4random.h:.*(missing braces around initializer|near initialization for 'arc4random_mtx)/;
		if ($log eq "vasaix53.vintela.com.log") {
		    # Bogus wait(2) macros on AIX 5.3
		    next if /warning: signed and unsigned type in conditional expression/;
		}
		push(@warnings, $_);
	    }
	}
	close($fh);
    }

    return @warnings;
}

sub check_logs {
    foreach my $platform (@platforms) {
	my @warnings = grep_log("${logs}/${platform}.build");
	foreach (@warnings) {
	    warn "$platform: $_\n";
	}
    }
    exit(0);
}

1;

END {
    # Only do cleanup in the main process
    return unless $$ == $main_pid;

    # Power down VMs cleanly if any are still running
    while (my ($vm_host, $configs) = each %vm_servers) {
	foreach my $conf (@{$configs}) {
	    vm_shutdown($vm_host, $conf);
	}
    }

    # Power down servers on a PDU cleanly if any are still running
    while (my ($pdu_host, $configs) = each %pdu_servers) {
	foreach my $conf (@{$configs}) {
	    pdu_shutdown($pdu_host, $conf);
	}
    }

    # Close any persistent ssh connections still running
    close_persistent_connections();

    # Remove temp directory used to generate the tarball.
    if (defined($sudo_tmpdir)) {
	system("rm -rf \"$sudo_tmpdir\"");
    }

    # Kill ssh-agent if we started one ourselves
    if (defined($agent_pid)) {
	kill(SIGINT, $agent_pid);
	waitpid($agent_pid, 0);
    }
}

__END__
=head1 NAME

build_pkgs - Build sudo packages on multiple hosts simultaneously

=head1 SYNOPSIS

build_pkgs [-c config_file] [-f tarball] [-h] [-i] [-q] [-R repo] [-r rev] [-v] [platform ...]

build_pkgs [--check-logs] [--config config_file] [--file tarball] [--help] [--ignore-cache] [--quiet] [--repository repo] [--revision rev] [--verbose] [platform ...]

=head1 OPTIONS

=over 4

=item B<--check-logs>

Check the existing build logs for warnings and errors and exit.
If no platform is specified, check the build logs of all configured
platforms.

=item B<-c> I<config_file>, B<--config> I<config_file>

Use the specified configuration file for settings and platform
configuration.

=item B<-f> I<tarball>, B<--file> I<tarball>

Build packages from the specified tar file.  If this option is not
specified, a distribution tarball will be generated from the tip
of the source repo.

=item B<-h>, B<--help>

Print a brief help message and exit.

=item B<-i>, B<--ignore-cache>

Do not use an existing config.cache file when configuring sudo.

=item B<-q>, B<--quiet>

Do not print a summary at the end detailing the success or failure
of each build and test run.

=item B<-R> I<repo>, B<--repository> I<repo>

The URL of the sudo Mercurial source repo to use if the B<--tarball>
option is not specified.

=item B<-r> I<rev>, B<--revision> I<rev>

The revision to check out if the B<--tarball> option is not specified.
If no revision is specified, the tip of the repo will be used.

=item B<-v>, B<--verbose>

Print additional information about the progress of builds as the
script runs.

=back

=head1 DESCRIPTION

B<build_pkgs> builds sudo packages on multiple systems at the same
time, logging each build and test job to a separate log file.  When
B<build_pkgs> finishes all its jobs, it prints a summary of each
platform with the status of the build and test scripts.

For each build host, B<build_pkgs> performs the following steps:

=over 4

=item 1.

Open a persistent ssh connection to the build host.
This connection is used for all build server -> client interaction.

=item 2.

Create a temporary directory on the build host.

=item 3.

Copy the release tarball (or repo archive) to the build host along
with a config.cache file (if using), build and test scripts.

=item 4.

Run the build script on the build host, which will unpack the tarball
and build the package(s).

=item 5.

If the build was successful, run the test script on the build host.

=item 6.

If the build was successful, copy the artifacts from the build host
to the artifacts directory.

=item 7.

The temporary directory is removed from the build host.

=back

=head2 Configuration file

The configuration file is in YAML format.  The supported settings
are as follows:

=over 4

=item home

The top directory that B<build_pkgs> will use.  By default, this
is the parent directory of the logs, artifacts, cache and connections
directories.

=item logs

The directory to store log files in.  By default, this is I<logs>
under the I<home> directory.

=item artifacts

The directory in which to store built artifacts.  By default, this
is I<artifacts> under the I<home> directory.

=item build_script

A custom build script to run on the build host.  By default,
B<sudo_sudo> will use a script that just unpacks the tarball and
runs the I<mkpkg> script.

=item test_script

A custom test script to run on the build host.  By default,
B<sudo_sudo> will use a script that just runs I<make check> from
within the build directory.

=item max_jobs

The number of build jobs to run simultaneously on a single host.

=item platforms

The platform configuration.  Platform are generally of the form
OS-architecture, for example I<rhel8-x86_64> or I<aix72-powerpc>.
Each platform supports the following settings:

=over 4

=item omit_artifacts

If set to true, avoid copying any artifacts built for this platform.
This can be used to build on systems where we don't publish packages.

=item crossbuild

The name of the platform to cross-compile for.  If specified, this
value is passed via the B<--osversion> option to the B<mkpkg> script.

=item proxy_cmd

The proxy command to pass to ssh via the I<ProxyCommand> option.

=item schroot

The name of the I<schroot> on I<ssh_host> to run the build inside.

=item shutdown

A command to run to shut down a virtual machine when the OS doesn't
support performing a graceful VM shutdown.

=item ssh_host

The build host to connect to.  A username may be prefixed in the
form user@host.

=item vm_host

The ESXi server that hosts I<ssh_host>.  If a I<vmid> is also set,
B<build_pkgs> will power on/off the VM on demand.

=item vmid

The ESXi virtual machine ID for the build host.  If I<vm_host> is
also set, B<build_pkgs> will power on/off the VM on demand.

=back

=back

The I<home> and I<platform> settings are mandatory.

=head1 EXAMPLES

Below is an example configuration file:

 # File locations.
 home: /home/sudo-build
 logs: /var/log/sudo-build
 artifacts: /home/sudo-build/artifacts

 # Custom build and test scripts.
 build_script: /home/sudo-build/scripts/build.sh
 test_script: /home/sudo-build/scripts/test.sh

 # Run up to two simultaneous jobs on each build host.
 max_jobs: 2

 # Ubuntu 22.04 LTS (Jammy Jellyfish)
 jammy-x86_64:
   schroot: jammy
   ssh_host: linux-build

 # macOS 11 and 12 builds on a single macOS 12 virtual machine.
 # If the VM is not running, it will be started and shut down when done.
  macos12:
    ssh_host: macos-build
    vm_host: root@esxi
    vmid: 150
  macos11:
    crossbuild: macos1100-i386
    ssh_host: macos-build
    vm_host: root@esxi
    vmid: 150

=head1 SIGNALS

When sent the C<SIGINFO> signal (or C<SIGUSR1> on system that don't
support C<SIGINFO>), B<build_pkgs> will output the currently running
build jobs as well as those jobs that are queued up waiting for a
slot on the build host.