tests/pytests/unit/modules/test_devinfo.py - master - githubmirror/salt

tests/pytests/unit/modules/test_devinfo.py
1 514 строк54 KB
Pedro Algarvio
Update pre-commit hook versions
29 фев 2024, 15:30
29 фев 2024, 15:30f454911
import textwrap

import pytest

from salt.modules import devinfo
from tests.support.mock import patch


@pytest.fixture
def configure_loader_modules():
    return {devinfo: {}}


def test_udev():
    assert devinfo._udev({"A": {"B": 1}}, "a.b") == 1
    assert devinfo._udev({"A": {"B": 1}}, "A.B") == 1
    assert devinfo._udev({"A": {"B": 1}}, "a.c") == "n/a"
    assert devinfo._udev({"A": [1, 2]}, "a.b") == "n/a"
    assert devinfo._udev({"A": {"B": 1}}, "") == {"A": {"B": 1}}


def test_match():
    assert devinfo._match({"A": {"B": 1}}, {"a.b": 1})
    assert not devinfo._match({"A": {"B": 1}}, {"a.b": 2})
    assert devinfo._match({"A": {"B": 1}}, {"a.b": [1, 2]})
    assert not devinfo._match({"A": {"B": 1}}, {"a.b": [2, 3]})
    assert devinfo._match({"A": {"B": [1, 2]}}, {"a.b": 1})
    assert devinfo._match({"A": {"B": [1, 2]}}, {"a.b": [1, 3]})
    assert not devinfo._match({"A": {"B": [1, 2]}}, {"a.b": [3, 4]})
    assert devinfo._match({"A": 1}, {})


def test_devices():
    cdrom = {
        "S": ["dvd", "cdrom"],
        "E": {"ID_BUS": "ata"},
    }
    usb = {
        "E": {"ID_BUS": "usb"},
    }
    hd = {
        "E": {"ID_BUS": "ata"},
    }

    def udev_info(key):
        devices = {"sda": hd, "sdb": usb, "sr0": cdrom}
        return devices[key]

    with patch.dict(devinfo.__salt__, {"udev.info": udev_info}), patch.dict(
        devinfo.__grains__, {"disks": ["sda", "sdb", "sr0"]}
    ):
        assert devinfo.filter_({"e.id_bus": "ata"}, {}) == ["sda", "sr0"]
        assert devinfo.filter_({"e.id_bus": "usb"}, {}) == ["sdb"]
        assert devinfo.filter_({"e.id_bus": "ata"}, {"s": ["cdrom"]}) == ["sda"]


def test__hwinfo_parse_short():
    hwinfo = textwrap.dedent(
        """
        cpu:
                               QEMU Virtual CPU version 2.5+, 3591 MHz
        keyboard:
          /dev/input/event0    AT Translated Set 2 keyboard
        mouse:
          /dev/input/mice      VirtualPS/2 VMware VMMouse
          /dev/input/mice      VirtualPS/2 VMware VMMouse
        graphics card:
                               VGA compatible controller
        storage:
                               Floppy disk controller
                               Red Hat Qemu virtual machine
        network:
          ens3                 Virtio Ethernet Card 0
        network interface:
          lo                   Loopback network interface
          ens3                 Ethernet network interface
        disk:
          /dev/fd0             Disk
          /dev/sda             QEMU HARDDISK
        cdrom:
          /dev/sr0             QEMU DVD-ROM
        floppy:
          /dev/fd0             Floppy Disk
        bios:
                               BIOS
        bridge:
                               Red Hat Qemu virtual machine
                               Red Hat Qemu virtual machine
                               Red Hat Qemu virtual machine
        memory:
                               Main Memory
        unknown:
                               FPU
                               DMA controller
                               PIC
                               Keyboard controller
          /dev/lp0             Parallel controller
                               PS/2 Controller
                               Red Hat Virtio network device
          /dev/ttyS0           16550A
    """
    )
    assert devinfo._hwinfo_parse_short(hwinfo) == {
        "cpu": {0: "QEMU Virtual CPU version 2.5+, 3591 MHz"},
        "keyboard": {"/dev/input/event0": "AT Translated Set 2 keyboard"},
        "mouse": {"/dev/input/mice": "VirtualPS/2 VMware VMMouse"},
        "graphics card": {0: "VGA compatible controller"},
        "storage": {
            0: "Floppy disk controller",
            1: "Red Hat Qemu virtual machine",
        },
        "network": {"ens3": "Virtio Ethernet Card 0"},
        "network interface": {
            "lo": "Loopback network interface",
            "ens3": "Ethernet network interface",
        },
        "disk": {"/dev/fd0": "Disk", "/dev/sda": "QEMU HARDDISK"},
        "cdrom": {"/dev/sr0": "QEMU DVD-ROM"},
        "floppy": {"/dev/fd0": "Floppy Disk"},
        "bios": {0: "BIOS"},
        "bridge": {
            0: "Red Hat Qemu virtual machine",
            1: "Red Hat Qemu virtual machine",
            2: "Red Hat Qemu virtual machine",
        },
        "memory": {0: "Main Memory"},
        "unknown": {
            0: "FPU",
            1: "DMA controller",
            2: "PIC",
            3: "Keyboard controller",
            "/dev/lp0": "Parallel controller",
            4: "PS/2 Controller",
            5: "Red Hat Virtio network device",
            "/dev/ttyS0": "16550A",
        },
    }


def test__hwinfo_parse_full_floppy():
    hwinfo = textwrap.dedent(
        """
        01: None 00.0: 0102 Floppy disk controller
          [Created at floppy.112]
          Unique ID: rdCR.3wRL2_g4d2B
          Hardware Class: storage
          Model: "Floppy disk controller"
          I/O Port: 0x3f2 (rw)
          I/O Ports: 0x3f4-0x3f5 (rw)
          I/O Port: 0x3f7 (rw)
          DMA: 2
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        02: Floppy 00.0: 10603 Floppy Disk
          [Created at floppy.127]
          Unique ID: sPPV.oZ89vuho4Y3
          Parent ID: rdCR.3wRL2_g4d2B
          Hardware Class: floppy
          Model: "Floppy Disk"
          Device File: /dev/fd0
          Size: 3.5 ''
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Size: 5760 sectors a 512 bytes
          Capacity: 0 GB (2949120 bytes)
          Drive status: no medium
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Attached to: #1 (Floppy disk controller)
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "01": {
            "None 00.0": "0102 Floppy disk controller",
            "Note": "Created at floppy.112",
            "Unique ID": "rdCR.3wRL2_g4d2B",
            "Hardware Class": "storage",
            "Model": "Floppy disk controller",
            "I/O Ports": ["0x3f2 (rw)", "0x3f4-0x3f5 (rw)", "0x3f7 (rw)"],
            "DMA": "2",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "02": {
            "Floppy 00.0": "10603 Floppy Disk",
            "Note": "Created at floppy.127",
            "Unique ID": "sPPV.oZ89vuho4Y3",
            "Parent ID": "rdCR.3wRL2_g4d2B",
            "Hardware Class": "floppy",
            "Model": "Floppy Disk",
            "Device File": "/dev/fd0",
            "Size": ["3.5 ''", "5760 sectors a 512 bytes"],
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
            "Capacity": "0 GB (2949120 bytes)",
            "Drive status": "no medium",
            "Attached to": {"Handle": "#1 (Floppy disk controller)"},
        },
    }


def test__hwinfo_parse_full_bios():
    hwinfo = textwrap.dedent(
        """
        03: None 00.0: 10105 BIOS
          [Created at bios.186]
          Unique ID: rdCR.lZF+r4EgHp4
          Hardware Class: bios
          BIOS Keyboard LED Status:
            Scroll Lock: off
            Num Lock: off
            Caps Lock: off
          Serial Port 0: 0x3f8
          Parallel Port 0: 0x378
          Base Memory: 639 kB
          PnP BIOS: @@@0000
          MP spec rev 1.4 info:
            OEM id: "BOCHSCPU"
            Product id: "0.1"
            1 CPUs (0 disabled)
          BIOS32 Service Directory Entry: 0xfd2b0
          SMBIOS Version: 2.8
          BIOS Info: #0
            Vendor: "SeaBIOS"
            Version: "rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org"
            Date: "04/01/2014"
            Start Address: 0xe8000
            ROM Size: 64 kB
            Features: 0x04000000000000000008
          System Info: #256
            Manufacturer: "QEMU"
            Product: "Standard PC (i440FX + PIIX, 1996)"
            Version: "pc-i440fx-4.0"
            UUID: undefined
            Wake-up: 0x06 (Power Switch)
          Chassis Info: #768
            Manufacturer: "QEMU"
            Version: "pc-i440fx-4.0"
            Type: 0x01 (Other)
            Bootup State: 0x03 (Safe)
            Power Supply State: 0x03 (Safe)
            Thermal State: 0x03 (Safe)
            Security Status: 0x02 (Unknown)
          Processor Info: #1024
            Socket: "CPU 0"
            Socket Type: 0x01 (Other)
            Socket Status: Populated
            Type: 0x03 (CPU)
            Family: 0x01 (Other)
            Manufacturer: "QEMU"
            Version: "pc-i440fx-4.0"
            Processor ID: 0x078bfbfd00000663
            Status: 0x01 (Enabled)
            Max. Speed: 2000 MHz
            Current Speed: 2000 MHz
          Physical Memory Array: #4096
            Use: 0x03 (System memory)
            Location: 0x01 (Other)
            Slots: 1
            Max. Size: 1 GB
            ECC: 0x06 (Multi-bit)
          Memory Device: #4352
            Location: "DIMM 0"
            Manufacturer: "QEMU"
            Memory Array: #4096
            Form Factor: 0x09 (DIMM)
            Type: 0x07 (RAM)
            Type Detail: 0x0002 (Other)
            Data Width: 0 bits
             Size: 1 GB
          Memory Array Mapping: #4864
            Memory Array: #4096
            Partition Width: 1
            Start Address: 0x00000000
            End Address: 0x40000000
          Type 32 Record: #8192
            Data 00: 20 0b 00 20 00 00 00 00 00 00 00
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "03": {
            "None 00.0": "10105 BIOS",
            "Note": "Created at bios.186",
            "Unique ID": "rdCR.lZF+r4EgHp4",
            "Hardware Class": "bios",
            "BIOS Keyboard LED Status": {
                "Scroll Lock": "off",
                "Num Lock": "off",
                "Caps Lock": "off",
            },
            "Serial Port 0": "0x3f8",
            "Parallel Port 0": "0x378",
            "Base Memory": "639 kB",
            "PnP BIOS": "@@@0000",
            "MP spec rev 1.4 info": {
                "OEM id": "BOCHSCPU",
                "Product id": "0.1",
                "Note": "1 CPUs (0 disabled)",
            },
            "BIOS32 Service Directory Entry": "0xfd2b0",
            "SMBIOS Version": "2.8",
            "BIOS Info": {
                "Handle": "#0",
                "Vendor": "SeaBIOS",
                "Version": "rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org",
                "Date": "04/01/2014",
                "Start Address": "0xe8000",
                "ROM Size": "64 kB",
                "Features": ["0x04000000000000000008"],
            },
            "System Info": {
                "Handle": "#256",
                "Manufacturer": "QEMU",
                "Product": "Standard PC (i440FX + PIIX, 1996)",
                "Version": "pc-i440fx-4.0",
                "UUID": "undefined",
                "Wake-up": "0x06 (Power Switch)",
            },
            "Chassis Info": {
                "Handle": "#768",
                "Manufacturer": "QEMU",
                "Version": "pc-i440fx-4.0",
                "Type": "0x01 (Other)",
                "Bootup State": "0x03 (Safe)",
                "Power Supply State": "0x03 (Safe)",
                "Thermal State": "0x03 (Safe)",
                "Security Status": "0x02 (Unknown)",
            },
            "Processor Info": {
                "Handle": "#1024",
                "Socket": "CPU 0",
                "Socket Type": "0x01 (Other)",
                "Socket Status": "Populated",
                "Type": "0x03 (CPU)",
                "Family": "0x01 (Other)",
                "Manufacturer": "QEMU",
                "Version": "pc-i440fx-4.0",
                "Processor ID": "0x078bfbfd00000663",
                "Status": "0x01 (Enabled)",
                "Max. Speed": "2000 MHz",
                "Current Speed": "2000 MHz",
            },
            "Physical Memory Array": {
                "Handle": "#4096",
                "Use": "0x03 (System memory)",
                "Location": "0x01 (Other)",
                "Slots": "1",
                "Max. Size": "1 GB",
                "ECC": "0x06 (Multi-bit)",
            },
            "Memory Device": {
                "Handle": "#4352",
                "Location": "DIMM 0",
                "Manufacturer": "QEMU",
                "Memory Array": {"Handle": "#4096"},
                "Form Factor": "0x09 (DIMM)",
                "Type": "0x07 (RAM)",
                "Type Detail": "0x0002 (Other)",
                "Data Width": "0 bits",
                "Size": "1 GB",
            },
            "Memory Array Mapping": {
                "Handle": "#4864",
                "Memory Array": {"Handle": "#4096"},
                "Partition Width": "1",
                "Start Address": "0x00000000",
                "End Address": "0x40000000",
            },
            "Type 32 Record": {
                "Handle": "#8192",
                "Data 00": "20 0b 00 20 00 00 00 00 00 00 00",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_system():
    hwinfo = textwrap.dedent(
        """
        04: None 00.0: 10107 System
          [Created at sys.64]
          Unique ID: rdCR.n_7QNeEnh23
          Hardware Class: system
          Model: "System"
          Formfactor: "desktop"
          Driver Info #0:
            Driver Status: thermal,fan are not active
            Driver Activation Cmd: "modprobe thermal; modprobe fan"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "04": {
            "None 00.0": "10107 System",
            "Note": "Created at sys.64",
            "Unique ID": "rdCR.n_7QNeEnh23",
            "Hardware Class": "system",
            "Model": "System",
            "Formfactor": "desktop",
            "Driver Info #0": {
                "Driver Status": "thermal,fan are not active",
                "Driver Activation Cmd": "modprobe thermal; modprobe fan",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_unknown():
    hwinfo = textwrap.dedent(
        """
        05: None 00.0: 10104 FPU
          [Created at misc.191]
          Unique ID: rdCR.EMpH5pjcahD
          Hardware Class: unknown
          Model: "FPU"
          I/O Ports: 0xf0-0xff (rw)
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        06: None 00.0: 0801 DMA controller (8237)
          [Created at misc.205]
          Unique ID: rdCR.f5u1ucRm+H9
          Hardware Class: unknown
          Model: "DMA controller"
          I/O Ports: 0x00-0xcf7 (rw)
          I/O Ports: 0xc0-0xdf (rw)
          I/O Ports: 0x80-0x8f (rw)
          DMA: 4
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        07: None 00.0: 0800 PIC (8259)
          [Created at misc.218]
          Unique ID: rdCR.8uRK7LxiIA2
          Hardware Class: unknown
          Model: "PIC"
          I/O Ports: 0x20-0x21 (rw)
          I/O Ports: 0xa0-0xa1 (rw)
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        08: None 00.0: 0900 Keyboard controller
          [Created at misc.250]
          Unique ID: rdCR.9N+EecqykME
          Hardware Class: unknown
          Model: "Keyboard controller"
          I/O Port: 0x60 (rw)
          I/O Port: 0x64 (rw)
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        09: None 00.0: 0701 Parallel controller (SPP)
          [Created at misc.261]
          Unique ID: YMnp.ecK7NLYWZ5D
          Hardware Class: unknown
          Model: "Parallel controller"
          Device File: /dev/lp0
          I/O Ports: 0x378-0x37a (rw)
          I/O Ports: 0x37b-0x37f (rw)
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        10: None 00.0: 10400 PS/2 Controller
          [Created at misc.303]
          Unique ID: rdCR.DziBbWO85o5
          Hardware Class: unknown
          Model: "PS/2 Controller"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "05": {
            "None 00.0": "10104 FPU",
            "Note": "Created at misc.191",
            "Unique ID": "rdCR.EMpH5pjcahD",
            "Hardware Class": "unknown",
            "Model": "FPU",
            "I/O Ports": "0xf0-0xff (rw)",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "06": {
            "None 00.0": "0801 DMA controller (8237)",
            "Note": "Created at misc.205",
            "Unique ID": "rdCR.f5u1ucRm+H9",
            "Hardware Class": "unknown",
            "Model": "DMA controller",
            "I/O Ports": [
                "0x00-0xcf7 (rw)",
                "0xc0-0xdf (rw)",
                "0x80-0x8f (rw)",
            ],
            "DMA": "4",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "07": {
            "None 00.0": "0800 PIC (8259)",
            "Note": "Created at misc.218",
            "Unique ID": "rdCR.8uRK7LxiIA2",
            "Hardware Class": "unknown",
            "Model": "PIC",
            "I/O Ports": ["0x20-0x21 (rw)", "0xa0-0xa1 (rw)"],
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "08": {
            "None 00.0": "0900 Keyboard controller",
            "Note": "Created at misc.250",
            "Unique ID": "rdCR.9N+EecqykME",
            "Hardware Class": "unknown",
            "Model": "Keyboard controller",
            "I/O Ports": ["0x60 (rw)", "0x64 (rw)"],
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "09": {
            "None 00.0": "0701 Parallel controller (SPP)",
            "Note": "Created at misc.261",
            "Unique ID": "YMnp.ecK7NLYWZ5D",
            "Hardware Class": "unknown",
            "Model": "Parallel controller",
            "Device File": "/dev/lp0",
            "I/O Ports": ["0x378-0x37a (rw)", "0x37b-0x37f (rw)"],
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "10": {
            "None 00.0": "10400 PS/2 Controller",
            "Note": "Created at misc.303",
            "Unique ID": "rdCR.DziBbWO85o5",
            "Hardware Class": "unknown",
            "Model": "PS/2 Controller",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_memory():
    hwinfo = textwrap.dedent(
        """
        12: None 00.0: 10102 Main Memory
          [Created at memory.74]
          Unique ID: rdCR.CxwsZFjVASF
          Hardware Class: memory
          Model: "Main Memory"
          Memory Range: 0x00000000-0x3cefffff (rw)
          Memory Size: 960 MB
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "12": {
            "None 00.0": "10102 Main Memory",
            "Note": "Created at memory.74",
            "Unique ID": "rdCR.CxwsZFjVASF",
            "Hardware Class": "memory",
            "Model": "Main Memory",
            "Memory Range": "0x00000000-0x3cefffff (rw)",
            "Memory Size": "960 MB",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_bridge():
    hwinfo = textwrap.dedent(
        """
        13: PCI 01.0: 0601 ISA bridge
          [Created at pci.386]
          Unique ID: vSkL.ucdhKwLeeAA
          SysFS ID: /devices/pci0000:00/0000:00:01.0
          SysFS BusID: 0000:00:01.0
          Hardware Class: bridge
          Model: "Red Hat Qemu virtual machine"
          Vendor: pci 0x8086 "Intel Corporation"
          Device: pci 0x7000 "82371SB PIIX3 ISA [Natoma/Triton II]"
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x1100 "Qemu virtual machine"
          Module Alias: "pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00"
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        14: PCI 00.0: 0600 Host bridge
          [Created at pci.386]
          Unique ID: qLht.YeL3TKDjrxE
          SysFS ID: /devices/pci0000:00/0000:00:00.0
          SysFS BusID: 0000:00:00.0
          Hardware Class: bridge
          Model: "Red Hat Qemu virtual machine"
          Vendor: pci 0x8086 "Intel Corporation"
          Device: pci 0x1237 "440FX - 82441FX PMC [Natoma]"
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x1100 "Qemu virtual machine"
          Revision: 0x02
          Module Alias: "pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00"
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        15: PCI 01.3: 0680 Bridge
          [Created at pci.386]
          Unique ID: VRCs.M9Cc8lcQjE2
          SysFS ID: /devices/pci0000:00/0000:00:01.3
          SysFS BusID: 0000:00:01.3
          Hardware Class: bridge
          Model: "Red Hat Qemu virtual machine"
          Vendor: pci 0x8086 "Intel Corporation"
          Device: pci 0x7113 "82371AB/EB/MB PIIX4 ACPI"
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x1100 "Qemu virtual machine"
          Revision: 0x03
          Driver: "piix4_smbus"
          Driver Modules: "i2c_piix4"
          IRQ: 9 (no events)
          Module Alias: "pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00"
          Driver Info #0:
            Driver Status: i2c_piix4 is active
            Driver Activation Cmd: "modprobe i2c_piix4"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "13": {
            "PCI 01.0": "0601 ISA bridge",
            "Note": "Created at pci.386",
            "Unique ID": "vSkL.ucdhKwLeeAA",
            "SysFS ID": "/devices/pci0000:00/0000:00:01.0",
            "SysFS BusID": "0000:00:01.0",
            "Hardware Class": "bridge",
            "Model": "Red Hat Qemu virtual machine",
            "Vendor": 'pci 0x8086 "Intel Corporation"',
            "Device": 'pci 0x7000 "82371SB PIIX3 ISA [Natoma/Triton II]"',
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": 'pci 0x1100 "Qemu virtual machine"',
            "Module Alias": ("pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00"),
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "14": {
            "PCI 00.0": "0600 Host bridge",
            "Note": "Created at pci.386",
            "Unique ID": "qLht.YeL3TKDjrxE",
            "SysFS ID": "/devices/pci0000:00/0000:00:00.0",
            "SysFS BusID": "0000:00:00.0",
            "Hardware Class": "bridge",
            "Model": "Red Hat Qemu virtual machine",
            "Vendor": 'pci 0x8086 "Intel Corporation"',
            "Device": 'pci 0x1237 "440FX - 82441FX PMC [Natoma]"',
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": 'pci 0x1100 "Qemu virtual machine"',
            "Revision": "0x02",
            "Module Alias": ("pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00"),
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "15": {
            "PCI 01.3": "0680 Bridge",
            "Note": "Created at pci.386",
            "Unique ID": "VRCs.M9Cc8lcQjE2",
            "SysFS ID": "/devices/pci0000:00/0000:00:01.3",
            "SysFS BusID": "0000:00:01.3",
            "Hardware Class": "bridge",
            "Model": "Red Hat Qemu virtual machine",
            "Vendor": 'pci 0x8086 "Intel Corporation"',
            "Device": 'pci 0x7113 "82371AB/EB/MB PIIX4 ACPI"',
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": 'pci 0x1100 "Qemu virtual machine"',
            "Revision": "0x03",
            "Driver": ["piix4_smbus"],
            "Driver Modules": ["i2c_piix4"],
            "IRQ": "9 (no events)",
            "Module Alias": ("pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00"),
            "Driver Info #0": {
                "Driver Status": "i2c_piix4 is active",
                "Driver Activation Cmd": "modprobe i2c_piix4",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_ethernet():
    hwinfo = textwrap.dedent(
        """
        16: PCI 03.0: 0200 Ethernet controller
          [Created at pci.386]
          Unique ID: 3hqH.pkM7KXDR457
          SysFS ID: /devices/pci0000:00/0000:00:03.0
          SysFS BusID: 0000:00:03.0
          Hardware Class: unknown
          Model: "Red Hat Virtio network device"
          Vendor: pci 0x1af4 "Red Hat, Inc."
          Device: pci 0x1000 "Virtio network device"
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x0001
          Driver: "virtio-pci"
          Driver Modules: "virtio_pci"
          I/O Ports: 0xc000-0xc01f (rw)
          Memory Range: 0xfebd1000-0xfebd1fff (rw,non-prefetchable)
          Memory Range: 0xfe000000-0xfe003fff (ro,non-prefetchable)
          Memory Range: 0xfeb80000-0xfebbffff (ro,non-prefetchable,disabled)
          IRQ: 11 (no events)
          Module Alias: "pci:v00001AF4d00001000sv00001AF4sd00000001bc02sc00i00"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "16": {
            "PCI 03.0": "0200 Ethernet controller",
            "Note": "Created at pci.386",
            "Unique ID": "3hqH.pkM7KXDR457",
            "SysFS ID": "/devices/pci0000:00/0000:00:03.0",
            "SysFS BusID": "0000:00:03.0",
            "Hardware Class": "unknown",
            "Model": "Red Hat Virtio network device",
            "Vendor": 'pci 0x1af4 "Red Hat, Inc."',
            "Device": 'pci 0x1000 "Virtio network device"',
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": "pci 0x0001",
            "Driver": ["virtio-pci"],
            "Driver Modules": ["virtio_pci"],
            "I/O Ports": "0xc000-0xc01f (rw)",
            "Memory Range": [
                "0xfebd1000-0xfebd1fff (rw,non-prefetchable)",
                "0xfe000000-0xfe003fff (ro,non-prefetchable)",
                "0xfeb80000-0xfebbffff (ro,non-prefetchable,disabled)",
            ],
            "IRQ": "11 (no events)",
            "Module Alias": ("pci:v00001AF4d00001000sv00001AF4sd00000001bc02sc00i00"),
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_storage():
    hwinfo = textwrap.dedent(
        """
        17: PCI 01.1: 0101 IDE interface (ISA Compatibility mode-only controller, supports bus mts bus mastering)
          [Created at pci.386]
          Unique ID: mnDB.3sKqaxiizg6
          SysFS ID: /devices/pci0000:00/0000:00:01.1
          SysFS BusID: 0000:00:01.1
          Hardware Class: storage
          Model: "Red Hat Qemu virtual machine"
          Vendor: pci 0x8086 "Intel Corporation"
          Device: pci 0x7010 "82371SB PIIX3 IDE [Natoma/Triton II]"
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x1100 "Qemu virtual machine"
          Driver: "ata_piix"
          Driver Modules: "ata_piix"
          I/O Ports: 0x1f0-0x1f7 (rw)
          I/O Port: 0x3f6 (rw)
          I/O Ports: 0x170-0x177 (rw)
          I/O Port: 0x376 (rw)
          I/O Ports: 0xc020-0xc02f (rw)
          Module Alias: "pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80"
          Driver Info #0:
            Driver Status: ata_piix is active
            Driver Activation Cmd: "modprobe ata_piix"
          Driver Info #1:
            Driver Status: ata_generic is active
            Driver Activation Cmd: "modprobe ata_generic"
          Driver Info #2:
            Driver Status: pata_acpi is active
            Driver Activation Cmd: "modprobe pata_acpi"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "17": {
            "PCI 01.1": (
                "0101 IDE interface (ISA Compatibility mode-only controller,"
                " supports bus mts bus mastering)"
            ),
            "Note": "Created at pci.386",
            "Unique ID": "mnDB.3sKqaxiizg6",
            "SysFS ID": "/devices/pci0000:00/0000:00:01.1",
            "SysFS BusID": "0000:00:01.1",
            "Hardware Class": "storage",
            "Model": "Red Hat Qemu virtual machine",
            "Vendor": 'pci 0x8086 "Intel Corporation"',
            "Device": 'pci 0x7010 "82371SB PIIX3 IDE [Natoma/Triton II]"',
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": 'pci 0x1100 "Qemu virtual machine"',
            "Driver": ["ata_piix"],
            "Driver Modules": ["ata_piix"],
            "I/O Ports": [
                "0x1f0-0x1f7 (rw)",
                "0x3f6 (rw)",
                "0x170-0x177 (rw)",
                "0x376 (rw)",
                "0xc020-0xc02f (rw)",
            ],
            "Module Alias": ("pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80"),
            "Driver Info #0": {
                "Driver Status": "ata_piix is active",
                "Driver Activation Cmd": "modprobe ata_piix",
            },
            "Driver Info #1": {
                "Driver Status": "ata_generic is active",
                "Driver Activation Cmd": "modprobe ata_generic",
            },
            "Driver Info #2": {
                "Driver Status": "pata_acpi is active",
                "Driver Activation Cmd": "modprobe pata_acpi",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_video():
    hwinfo = textwrap.dedent(
        """
        18: PCI 02.0: 0300 VGA compatible controller (VGA)
          [Created at pci.386]
          Unique ID: _Znp.WspiKb87LiA
          SysFS ID: /devices/pci0000:00/0000:00:02.0
          SysFS BusID: 0000:00:02.0
          Hardware Class: graphics card
          Model: "VGA compatible controller"
          Vendor: pci 0x1234
          Device: pci 0x1111
          SubVendor: pci 0x1af4 "Red Hat, Inc."
          SubDevice: pci 0x1100
          Revision: 0x02
          Driver: "bochs-drm"
          Driver Modules: "bochs_drm"
          Memory Range: 0xfd000000-0xfdffffff (ro,non-prefetchable)
          Memory Range: 0xfebd0000-0xfebd0fff (rw,non-prefetchable)
          Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
          Module Alias: "pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00"
          Driver Info #0:
            Driver Status: bochs_drm is active
            Driver Activation Cmd: "modprobe bochs_drm"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "18": {
            "PCI 02.0": "0300 VGA compatible controller (VGA)",
            "Note": "Created at pci.386",
            "Unique ID": "_Znp.WspiKb87LiA",
            "SysFS ID": "/devices/pci0000:00/0000:00:02.0",
            "SysFS BusID": "0000:00:02.0",
            "Hardware Class": "graphics card",
            "Model": "VGA compatible controller",
            "Vendor": "pci 0x1234",
            "Device": "pci 0x1111",
            "SubVendor": 'pci 0x1af4 "Red Hat, Inc."',
            "SubDevice": "pci 0x1100",
            "Revision": "0x02",
            "Driver": ["bochs-drm"],
            "Driver Modules": ["bochs_drm"],
            "Memory Range": [
                "0xfd000000-0xfdffffff (ro,non-prefetchable)",
                "0xfebd0000-0xfebd0fff (rw,non-prefetchable)",
                "0x000c0000-0x000dffff (rw,non-prefetchable,disabled)",
            ],
            "Module Alias": ("pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00"),
            "Driver Info #0": {
                "Driver Status": "bochs_drm is active",
                "Driver Activation Cmd": "modprobe bochs_drm",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_network():
    hwinfo = textwrap.dedent(
        """
        19: Virtio 00.0: 0200 Ethernet controller
          [Created at pci.1679]
          Unique ID: vWuh.VIRhsc57kTD
          Parent ID: 3hqH.pkM7KXDR457
          SysFS ID: /devices/pci0000:00/0000:00:03.0/virtio0
          SysFS BusID: virtio0
          Hardware Class: network
          Model: "Virtio Ethernet Card 0"
          Vendor: int 0x6014 "Virtio"
          Device: int 0x0001 "Ethernet Card 0"
          Driver: "virtio_net"
          Driver Modules: "virtio_net"
          Device File: ens3
          HW Address: 52:54:00:12:34:56
          Permanent HW Address: 52:54:00:12:34:56
          Link detected: yes
          Module Alias: "virtio:d00000001v00001AF4"
          Driver Info #0:
            Driver Status: virtio_net is active
            Driver Activation Cmd: "modprobe virtio_net"
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Attached to: #16 (Ethernet controller)

        20: None 00.0: 0700 Serial controller (16550)
          [Created at serial.74]
          Unique ID: S_Uw.3fyvFV+mbWD
          Hardware Class: unknown
          Model: "16550A"
          Device: "16550A"
          Device File: /dev/ttyS0
          Tags: mouse, modem, braille
          I/O Ports: 0x3f8-0x3ff (rw)
          IRQ: 4 (55234 events)
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "19": {
            "Virtio 00.0": "0200 Ethernet controller",
            "Note": "Created at pci.1679",
            "Unique ID": "vWuh.VIRhsc57kTD",
            "Parent ID": "3hqH.pkM7KXDR457",
            "SysFS ID": "/devices/pci0000:00/0000:00:03.0/virtio0",
            "SysFS BusID": "virtio0",
            "Hardware Class": "network",
            "Model": "Virtio Ethernet Card 0",
            "Vendor": 'int 0x6014 "Virtio"',
            "Device": 'int 0x0001 "Ethernet Card 0"',
            "Driver": ["virtio_net"],
            "Driver Modules": ["virtio_net"],
            "Device File": "ens3",
            "HW Address": "52:54:00:12:34:56",
            "Permanent HW Address": "52:54:00:12:34:56",
            "Link detected": "yes",
            "Module Alias": "virtio:d00000001v00001AF4",
            "Driver Info #0": {
                "Driver Status": "virtio_net is active",
                "Driver Activation Cmd": "modprobe virtio_net",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
            "Attached to": {"Handle": "#16 (Ethernet controller)"},
        },
        "20": {
            "None 00.0": "0700 Serial controller (16550)",
            "Note": "Created at serial.74",
            "Unique ID": "S_Uw.3fyvFV+mbWD",
            "Hardware Class": "unknown",
            "Model": "16550A",
            "Device": "16550A",
            "Device File": "/dev/ttyS0",
            "Tags": ["mouse", "modem", "braille"],
            "I/O Ports": "0x3f8-0x3ff (rw)",
            "IRQ": "4 (55234 events)",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_disk():
    hwinfo = textwrap.dedent(
        """
        21: SCSI 100.0: 10602 CD-ROM (DVD)
          [Created at block.249]
          Unique ID: KD9E.53N0UD4ozwD
          Parent ID: mnDB.3sKqaxiizg6
          SysFS ID: /class/block/sr0
          SysFS BusID: 1:0:0:0
          SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata2/host1/target1:0:0/1:0:0:0
          Hardware Class: cdrom
          Model: "QEMU DVD-ROM"
          Vendor: "QEMU"
          Device: "QEMU DVD-ROM"
          Revision: "2.5+"
          Driver: "ata_piix", "sr"
          Driver Modules: "ata_piix", "sr_mod"
          Device File: /dev/sr0 (/dev/sg1)
          Device Files: /dev/sr0, /dev/cdrom, /dev/dvd, /dev/disk/by-path/pci-0000:00:01.1-ata-2, /dev/disk/by-id/ata-QEMU_DVD-ROM_QM00003, /dev/disk/by-uuid/2019-08-11-11-44-39-00, /dev/disk/by-label/CDROM
          Device Number: block 11:0 (char 21:1)
          Features: DVD, MRW, MRW-W
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Attached to: #17 (IDE interface)
          Drive Speed: 4
          Volume ID: "CDROM"
          Application: "0X5228779D"
          Publisher: "SUSE LINUX GMBH"
          Preparer: "KIWI - HTTPS://GITHUB.COM/OSINSIDE/KIWI"
          Creation date: "2019081111443900"
          El Torito info: platform 0, bootable
            Boot Catalog: at sector 0x00fa
            Media: none starting at sector 0x00fb
            Load: 2048 bytes

        22: None 00.0: 10600 Disk
          [Created at block.245]
          Unique ID: kwWm.Fxp0d3BezAE
          SysFS ID: /class/block/fd0
          SysFS BusID: floppy.0
          SysFS Device Link: /devices/platform/floppy.0
          Hardware Class: disk
          Model: "Disk"
          Driver: "floppy"
          Driver Modules: "floppy"
          Device File: /dev/fd0
          Device Number: block 2:0
          Size: 8 sectors a 512 bytes
          Capacity: 0 GB (4096 bytes)
          Drive status: no medium
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        23: IDE 00.0: 10600 Disk
          [Created at block.245]
          Unique ID: 3OOL.W8iGvCekDp8
          Parent ID: mnDB.3sKqaxiizg6
          SysFS ID: /class/block/sda
          SysFS BusID: 0:0:0:0
          SysFS Device Link: /devices/pci0000:00/0000:00:01.1/ata1/host0/target0:0:0/0:0:0:0
          Hardware Class: disk
          Model: "QEMU HARDDISK"
          Vendor: "QEMU"
          Device: "HARDDISK"
          Revision: "2.5+"
          Serial ID: "QM00001"
          Driver: "ata_piix", "sd"
          Driver Modules: "ata_piix"
          Device File: /dev/sda
          Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:01.1-ata-1, /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001
          Device Number: block 8:0-8:15
          Geometry (Logical): CHS 3133/255/63
          Size: 50331648 sectors a 512 bytes
          Capacity: 24 GB (25769803776 bytes)
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Attached to: #17 (IDE interface)
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "21": {
            "SCSI 100.0": "10602 CD-ROM (DVD)",
            "Note": "Created at block.249",
            "Unique ID": "KD9E.53N0UD4ozwD",
            "Parent ID": "mnDB.3sKqaxiizg6",
            "SysFS ID": "/class/block/sr0",
            "SysFS BusID": "1:0:0:0",
            "SysFS Device Link": "/devices/pci0000:00/0000:00:01.1/ata2/host1/target1:0:0/1:0:0:0",
            "Hardware Class": "cdrom",
            "Model": "QEMU DVD-ROM",
            "Vendor": "QEMU",
            "Device": "QEMU DVD-ROM",
            "Revision": "2.5+",
            "Driver": ["ata_piix", "sr"],
            "Driver Modules": ["ata_piix", "sr_mod"],
            "Device File": "/dev/sr0 (/dev/sg1)",
            "Device Files": [
                "/dev/sr0",
                "/dev/cdrom",
                "/dev/dvd",
                "/dev/disk/by-path/pci-0000:00:01.1-ata-2",
                "/dev/disk/by-id/ata-QEMU_DVD-ROM_QM00003",
                "/dev/disk/by-uuid/2019-08-11-11-44-39-00",
                "/dev/disk/by-label/CDROM",
            ],
            "Device Number": "block 11:0 (char 21:1)",
            "Features": ["DVD", "MRW", "MRW-W"],
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
            "Attached to": {"Handle": "#17 (IDE interface)"},
            "Drive Speed": "4",
            "Volume ID": "CDROM",
            "Application": "0X5228779D",
            "Publisher": "SUSE LINUX GMBH",
            "Preparer": "KIWI - HTTPS://GITHUB.COM/OSINSIDE/KIWI",
            "Creation date": "2019081111443900",
            "El Torito info": {
                "platform": "0",
                "bootable": "yes",
                "Boot Catalog": "at sector 0x00fa",
                "Media": "none starting at sector 0x00fb",
                "Load": "2048 bytes",
            },
        },
        "22": {
            "None 00.0": "10600 Disk",
            "Note": "Created at block.245",
            "Unique ID": "kwWm.Fxp0d3BezAE",
            "SysFS ID": "/class/block/fd0",
            "SysFS BusID": "floppy.0",
            "SysFS Device Link": "/devices/platform/floppy.0",
            "Hardware Class": "disk",
            "Model": "Disk",
            "Driver": ["floppy"],
            "Driver Modules": ["floppy"],
            "Device File": "/dev/fd0",
            "Device Number": "block 2:0",
            "Size": "8 sectors a 512 bytes",
            "Capacity": "0 GB (4096 bytes)",
            "Drive status": "no medium",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "23": {
            "IDE 00.0": "10600 Disk",
            "Note": "Created at block.245",
            "Unique ID": "3OOL.W8iGvCekDp8",
            "Parent ID": "mnDB.3sKqaxiizg6",
            "SysFS ID": "/class/block/sda",
            "SysFS BusID": "0:0:0:0",
            "SysFS Device Link": "/devices/pci0000:00/0000:00:01.1/ata1/host0/target0:0:0/0:0:0:0",
            "Hardware Class": "disk",
            "Model": "QEMU HARDDISK",
            "Vendor": "QEMU",
            "Device": "HARDDISK",
            "Revision": "2.5+",
            "Serial ID": "QM00001",
            "Driver": ["ata_piix", "sd"],
            "Driver Modules": ["ata_piix"],
            "Device File": "/dev/sda",
            "Device Files": [
                "/dev/sda",
                "/dev/disk/by-path/pci-0000:00:01.1-ata-1",
                "/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001",
            ],
            "Device Number": "block 8:0-8:15",
            "Geometry (Logical)": "CHS 3133/255/63",
            "Size": "50331648 sectors a 512 bytes",
            "Capacity": "24 GB (25769803776 bytes)",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
            "Attached to": {"Handle": "#17 (IDE interface)"},
        },
    }


def test__hwinfo_parse_full_keyboard():
    hwinfo = textwrap.dedent(
        """
        24: PS/2 00.0: 10800 Keyboard
          [Created at input.226]
          Unique ID: nLyy.+49ps10DtUF
          Hardware Class: keyboard
          Model: "AT Translated Set 2 keyboard"
          Vendor: 0x0001
          Device: 0x0001 "AT Translated Set 2 keyboard"
          Compatible to: int 0x0211 0x0001
          Device File: /dev/input/event0
          Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd
          Device Number: char 13:64
          Driver Info #0:
            XkbRules: xfree86
            XkbModel: pc104
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "24": {
            "PS/2 00.0": "10800 Keyboard",
            "Note": "Created at input.226",
            "Unique ID": "nLyy.+49ps10DtUF",
            "Hardware Class": "keyboard",
            "Model": "AT Translated Set 2 keyboard",
            "Vendor": "0x0001",
            "Device": '0x0001 "AT Translated Set 2 keyboard"',
            "Compatible to": "int 0x0211 0x0001",
            "Device File": "/dev/input/event0",
            "Device Files": [
                "/dev/input/event0",
                "/dev/input/by-path/platform-i8042-serio-0-event-kbd",
            ],
            "Device Number": "char 13:64",
            "Driver Info #0": {"XkbRules": "xfree86", "XkbModel": "pc104"},
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_mouse():
    hwinfo = textwrap.dedent(
        """
        25: PS/2 00.0: 10500 PS/2 Mouse
          [Created at input.249]
          Unique ID: AH6Q.mYF0pYoTCW7
          Hardware Class: mouse
          Model: "VirtualPS/2 VMware VMMouse"
          Vendor: 0x0002
          Device: 0x0013 "VirtualPS/2 VMware VMMouse"
          Compatible to: int 0x0210 0x0003
          Device File: /dev/input/mice (/dev/input/mouse0)
          Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse
          Device Number: char 13:63 (char 13:32)
          Driver Info #0:
            Buttons: 3
            Wheels: 0
            XFree86 Protocol: explorerps/2
            GPM Protocol: exps2
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        26: PS/2 00.0: 10500 PS/2 Mouse
          [Created at input.249]
          Unique ID: AH6Q.++hSeDccb2F
          Hardware Class: mouse
          Model: "VirtualPS/2 VMware VMMouse"
          Vendor: 0x0002
          Device: 0x0013 "VirtualPS/2 VMware VMMouse"
          Compatible to: int 0x0210 0x0012
          Device File: /dev/input/mice (/dev/input/mouse1)
          Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2
          Device Number: char 13:63 (char 13:33)
          Driver Info #0:
            Buttons: 2
            Wheels: 1
            XFree86 Protocol: explorerps/2
            GPM Protocol: exps2
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "25": {
            "PS/2 00.0": "10500 PS/2 Mouse",
            "Note": "Created at input.249",
            "Unique ID": "AH6Q.mYF0pYoTCW7",
            "Hardware Class": "mouse",
            "Model": "VirtualPS/2 VMware VMMouse",
            "Vendor": "0x0002",
            "Device": '0x0013 "VirtualPS/2 VMware VMMouse"',
            "Compatible to": "int 0x0210 0x0003",
            "Device File": "/dev/input/mice (/dev/input/mouse0)",
            "Device Files": [
                "/dev/input/mice",
                "/dev/input/mouse0",
                "/dev/input/event1",
                "/dev/input/by-path/platform-i8042-serio-1-event-mouse",
                "/dev/input/by-path/platform-i8042-serio-1-mouse",
            ],
            "Device Number": "char 13:63 (char 13:32)",
            "Driver Info #0": {
                "Buttons": "3",
                "Wheels": "0",
                "XFree86 Protocol": "explorerps/2",
                "GPM Protocol": "exps2",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "26": {
            "PS/2 00.0": "10500 PS/2 Mouse",
            "Note": "Created at input.249",
            "Unique ID": "AH6Q.++hSeDccb2F",
            "Hardware Class": "mouse",
            "Model": "VirtualPS/2 VMware VMMouse",
            "Vendor": "0x0002",
            "Device": '0x0013 "VirtualPS/2 VMware VMMouse"',
            "Compatible to": "int 0x0210 0x0012",
            "Device File": "/dev/input/mice (/dev/input/mouse1)",
            "Device Files": [
                "/dev/input/mice",
                "/dev/input/mouse1",
                "/dev/input/event2",
            ],
            "Device Number": "char 13:63 (char 13:33)",
            "Driver Info #0": {
                "Buttons": "2",
                "Wheels": "1",
                "XFree86 Protocol": "explorerps/2",
                "GPM Protocol": "exps2",
            },
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_cpu():
    hwinfo = textwrap.dedent(
        """
        27: None 00.0: 10103 CPU
          [Created at cpu.462]
          Unique ID: rdCR.j8NaKXDZtZ6
          Hardware Class: cpu
          Arch: X86-64
          Vendor: "GenuineIntel"
          Model: 6.6.3 "QEMU Virtual CPU version 2.5+"
          Features: fpu,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,lm,rep_good,nopl,xtopology,cpuid,tsc_known_freq,pni,cx16,x2apic,hypervisor,lahf_lm,cpuid_fault,pti
          Clock: 3591 MHz
          BogoMips: 7182.68
          Cache: 16384 kb
          Config Status: cfg=new, avail=yes, need=no, active=unknown
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "27": {
            "None 00.0": "10103 CPU",
            "Note": "Created at cpu.462",
            "Unique ID": "rdCR.j8NaKXDZtZ6",
            "Hardware Class": "cpu",
            "Arch": "X86-64",
            "Vendor": "GenuineIntel",
            "Model": '6.6.3 "QEMU Virtual CPU version 2.5+"',
            "Features": [
                "fpu",
                "de",
                "pse",
                "tsc",
                "msr",
                "pae",
                "mce",
                "cx8",
                "apic",
                "sep",
                "mtrr",
                "pge",
                "mca",
                "cmov",
                "pse36",
                "clflush",
                "mmx",
                "fxsr",
                "sse",
                "sse2",
                "syscall",
                "nx",
                "lm",
                "rep_good",
                "nopl",
                "xtopology",
                "cpuid",
                "tsc_known_freq",
                "pni",
                "cx16",
                "x2apic",
                "hypervisor",
                "lahf_lm",
                "cpuid_fault",
                "pti",
            ],
            "Clock": "3591 MHz",
            "BogoMips": "7182.68",
            "Cache": "16384 kb",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
    }


def test__hwinfo_parse_full_nic():
    hwinfo = textwrap.dedent(
        """
        28: None 00.0: 10700 Loopback
          [Created at net.126]
          Unique ID: ZsBS.GQNx7L4uPNA
          SysFS ID: /class/net/lo
          Hardware Class: network interface
          Model: "Loopback network interface"
          Device File: lo
          Link detected: yes
          Config Status: cfg=new, avail=yes, need=no, active=unknown

        29: None 03.0: 10701 Ethernet
          [Created at net.126]
          Unique ID: U2Mp.ndpeucax6V1
          Parent ID: vWuh.VIRhsc57kTD
          SysFS ID: /class/net/ens3
          SysFS Device Link: /devices/pci0000:00/0000:00:03.0/virtio0
          Hardware Class: network interface
          Model: "Ethernet network interface"
          Driver: "virtio_net"
          Driver Modules: "virtio_net"
          Device File: ens3
          HW Address: 52:54:00:12:34:56
          Permanent HW Address: 52:54:00:12:34:56
          Link detected: yes
          Config Status: cfg=new, avail=yes, need=no, active=unknown
          Attached to: #19 (Ethernet controller)
    """
    )
    assert devinfo._hwinfo_parse_full(hwinfo) == {
        "28": {
            "None 00.0": "10700 Loopback",
            "Note": "Created at net.126",
            "Unique ID": "ZsBS.GQNx7L4uPNA",
            "SysFS ID": "/class/net/lo",
            "Hardware Class": "network interface",
            "Model": "Loopback network interface",
            "Device File": "lo",
            "Link detected": "yes",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
        },
        "29": {
            "None 03.0": "10701 Ethernet",
            "Note": "Created at net.126",
            "Unique ID": "U2Mp.ndpeucax6V1",
            "Parent ID": "vWuh.VIRhsc57kTD",
            "SysFS ID": "/class/net/ens3",
            "SysFS Device Link": "/devices/pci0000:00/0000:00:03.0/virtio0",
            "Hardware Class": "network interface",
            "Model": "Ethernet network interface",
            "Driver": ["virtio_net"],
            "Driver Modules": ["virtio_net"],
            "Device File": "ens3",
            "HW Address": "52:54:00:12:34:56",
            "Permanent HW Address": "52:54:00:12:34:56",
            "Link detected": "yes",
            "Config Status": {
                "cfg": "new",
                "avail": "yes",
                "need": "no",
                "active": "unknown",
            },
            "Attached to": {"Handle": "#19 (Ethernet controller)"},
        },
    }