githubmirror/rsyslog

runtime/module-template.h
1 238 строк51 KB
Aditi Prakash
core: Fix typos in comments
17 мар 2026, 09:40
17 мар 2026, 09:40075bf30
/* module-template.h
 * This header contains macros that can be used to implement the
 * plumbing of modules.
 *
 * File begun on 2007-07-25 by RGerhards
 *
 * Copyright 2007-2026 Adiscon GmbH.
 *
 * This file is part of the rsyslog runtime library.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *       http://www.apache.org/licenses/LICENSE-2.0
 *       -or-
 *       see COPYING.ASL20 in the source distribution
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MODULE_TEMPLATE_H_INCLUDED
#define MODULE_TEMPLATE_H_INCLUDED 1

#include "modules.h"
#include "obj.h"
#include "objomsr.h"
#include "threads.h"

/* macro to define standard output-module static data members
 */
#define DEF_MOD_STATIC_DATA                                                                                   \
    static __attribute__((unused)) rsRetVal (*omsdRegCFSLineHdlr)(uchar * pCmdName, int bChainingPermitted,   \
                                                                  ecslCmdHdrlType eType, rsRetVal (*pHdlr)(), \
                                                                  void *pData, void *pOwnerCookie)

#define DEF_OMOD_STATIC_DATA \
    DEF_MOD_STATIC_DATA;     \
    DEFobjCurrIf(obj) static __attribute__((unused)) int bCoreSupportsBatching;
#define DEF_IMOD_STATIC_DATA \
    DEF_MOD_STATIC_DATA;     \
    DEFobjCurrIf(obj)
#define DEF_LMOD_STATIC_DATA DEF_MOD_STATIC_DATA
#define DEF_PMOD_STATIC_DATA \
    DEFobjCurrIf(obj);       \
    DEF_MOD_STATIC_DATA
#define DEF_SMOD_STATIC_DATA \
    DEFobjCurrIf(obj);       \
    DEF_MOD_STATIC_DATA
#define DEF_FMOD_STATIC_DATA \
    DEFobjCurrIf(obj);       \
    DEF_MOD_STATIC_DATA


/* Macro to define the module type. Each module can only have a single type. If
 * a module provides multiple types, several separate modules must be created which
 * then should share a single library containing the majority of code. This macro
 * must be present in each module. -- rgerhards, 2007-12-14
 * Note that MODULE_TYPE_TESTBENCH is reserved for testbenches, but
 * declared in their own header files (because the rest does not need these
 * defines). -- rgerhards, 2008-06-13
 */
#define MODULE_TYPE(x)                                \
    static rsRetVal modGetType(eModType_t *modType) { \
        *modType = x;                                 \
        return RS_RET_OK;                             \
    }

#define MODULE_TYPE_INPUT MODULE_TYPE(eMOD_IN)
#define MODULE_TYPE_OUTPUT MODULE_TYPE(eMOD_OUT)
#define MODULE_TYPE_PARSER MODULE_TYPE(eMOD_PARSER)
#define MODULE_TYPE_STRGEN MODULE_TYPE(eMOD_STRGEN)
#define MODULE_TYPE_FUNCTION MODULE_TYPE(eMOD_FUNCTION)
#define MODULE_TYPE_LIB   \
    DEF_LMOD_STATIC_DATA; \
    MODULE_TYPE(eMOD_LIB)

/* Macro to define whether the module should be kept dynamically linked.
 */
#define MODULE_KEEP_TYPE(x)                                       \
    static rsRetVal modGetKeepType(eModKeepType_t *modKeepType) { \
        *modKeepType = x;                                         \
        return RS_RET_OK;                                         \
    }
#define MODULE_TYPE_NOKEEP MODULE_KEEP_TYPE(eMOD_NOKEEP)
#define MODULE_TYPE_KEEP MODULE_KEEP_TYPE(eMOD_KEEP)

/* macro to define a unique module id. This must be able to fit in a void*. The
 * module id must be unique inside a running rsyslogd application. It is used to
 * track ownership of several objects. Most importantly, when the module is
 * unloaded the module id value is used to find what needs to be destroyed.
 * We currently use a pointer to modExit() as the module id. This sounds to be
 * reasonable save, as each module must have this entry point AND there is no valid
 * reason for twice this entry point being in memory.
 * rgerhards, 2007-11-21
 */
#define STD_LOADABLE_MODULE_ID ((void *)modExit)


/* macro to implement the "modGetID()" interface function
 * rgerhards 2007-11-21
 */
#define DEFmodGetID                        \
    static rsRetVal modGetID(void **pID) { \
        *pID = STD_LOADABLE_MODULE_ID;     \
        return RS_RET_OK;                  \
    }

/* macro to provide the v6 config system module name
 */
#define MODULE_CNFNAME(name)                         \
    static rsRetVal modGetCnfName(uchar **cnfName) { \
        *cnfName = (uchar *)name;                    \
        return RS_RET_OK;                            \
    }


/* to following macros are used to generate function headers and standard
 * functionality. It works as follows (described on the sample case of
 * createInstance()):
 *
 * BEGINcreateInstance
 * ... custom variable definitions (on stack) ... (if any)
 * CODESTARTcreateInstance
 * ... custom code ... (if any)
 * ENDcreateInstance
 */

/* createInstance()
 */
#define BEGINcreateInstance                                 \
    static rsRetVal createInstance(instanceData **ppData) { \
        DEFiRet; /* store error code here */                \
        instanceData *pData; /* use this to point to data elements */

#define CODESTARTcreateInstance                              \
    if ((pData = calloc(1, sizeof(instanceData))) == NULL) { \
        *ppData = NULL;                                      \
        return RS_RET_OUT_OF_MEMORY;                         \
    }

#define ENDcreateInstance \
    *ppData = pData;      \
    RETiRet;              \
    }

/* freeInstance()
 * This is the cleanup function for the module instance. It is called immediately before
 * the module instance is destroyed (unloaded). The module should do any cleanup
 * here, e.g. close file, free instantance heap memory and the like. Control will
 * not be passed back to the module once this function is finished. Keep in mind,
 * however, that other instances may still be loaded and used. So do not destroy
 * anything that may be used by another instance. If you have such a ressource, you
 * currently need to do the instance counting yourself.
 */
#define BEGINfreeInstance                          \
    static rsRetVal freeInstance(void *pModData) { \
        DEFiRet;                                   \
        instanceData *pData;

#define CODESTARTfreeInstance pData = (instanceData *)pModData;

#define ENDfreeInstance                                                    \
    if (pData != NULL) free(pData); /* we need to free this in any case */ \
    RETiRet;                                                               \
    }

/* createWrkrInstance()
 */
#define BEGINcreateWrkrInstance                                                                \
    static rsRetVal createWrkrInstance(wrkrInstanceData_t **ppWrkrData, instanceData *pData) { \
        DEFiRet; /* store error code here */                                                   \
        wrkrInstanceData_t *pWrkrData; /* use this to point to data elements */

#define CODESTARTcreateWrkrInstance                                    \
    if ((pWrkrData = calloc(1, sizeof(wrkrInstanceData_t))) == NULL) { \
        *ppWrkrData = NULL;                                            \
        return RS_RET_OUT_OF_MEMORY;                                   \
    }                                                                  \
    pWrkrData->pData = pData;

#define ENDcreateWrkrInstance \
    *ppWrkrData = pWrkrData;  \
    RETiRet;                  \
    }

/* freeWrkrInstance */
#define BEGINfreeWrkrInstance                    \
    static rsRetVal freeWrkrInstance(void *pd) { \
        DEFiRet;                                 \
        wrkrInstanceData_t *pWrkrData;

#define CODESTARTfreeWrkrInstance pWrkrData = (wrkrInstanceData_t *)pd;

#define ENDfreeWrkrInstance                                                        \
    if (pWrkrData != NULL) free(pWrkrData); /* we need to free this in any case */ \
    RETiRet;                                                                       \
    }


/* isCompatibleWithFeature()
 */
#define BEGINisCompatibleWithFeature                                                       \
    static rsRetVal isCompatibleWithFeature(syslogFeature __attribute__((unused)) eFeat) { \
        rsRetVal iRet = RS_RET_INCOMPATIBLE;

#define CODESTARTisCompatibleWithFeature

#define ENDisCompatibleWithFeature \
    RETiRet;                       \
    }


/* beginTransaction()
 * introduced in v4.3.3 -- rgerhards, 2009-04-27
 */
#define BEGINbeginTransaction                                                                  \
    static rsRetVal beginTransaction(wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        DEFiRet;

#define CODESTARTbeginTransaction /* currently empty, but may be extended */

#define ENDbeginTransaction \
    RETiRet;                \
    }


/* commitTransaction()
 * Commits a transaction. Note that beginTransaction() must have been
 * called before this entry point. It receives the full batch of messages
 * to be processed in pParam parameter.
 * introduced in v8.1.3 -- rgerhards, 2013-12-04
 */
#define BEGINcommitTransaction                                                                     \
    static rsRetVal commitTransaction(wrkrInstanceData_t __attribute__((unused)) *const pWrkrData, \
                                      actWrkrIParams_t *const pParams, const unsigned nParams) {   \
        DEFiRet;

#define CODESTARTcommitTransaction /* currently empty, but may be extended */

#define ENDcommitTransaction \
    RETiRet;                 \
    }

/* endTransaction()
 * introduced in v4.3.3 -- rgerhards, 2009-04-27
 */
#define BEGINendTransaction                                                                  \
    static rsRetVal endTransaction(wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        DEFiRet;

#define CODESTARTendTransaction /* currently empty, but may be extended */

#define ENDendTransaction \
    RETiRet;              \
    }


/* doAction()
 */
#define BEGINdoAction                                                                                  \
    static rsRetVal doAction(void *pMsgData, wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        uchar **ppString = (uchar **)pMsgData;                                                         \
        DEFiRet;

#define CODESTARTdoAction /* ppString may be NULL if the output module requested no strings */

#define ENDdoAction \
    RETiRet;        \
    }

/* setActionInfo()
 * Optional callback to provide the action object after creation.
 */
#define BEGINsetActionInfo                                                         \
    static rsRetVal setActionInfo(void *const pModData, action_t *const pAction) { \
        DEFiRet;                                                                   \
        instanceData *pData;

#define CODESTARTsetActionInfo        \
    pData = (instanceData *)pModData; \
    (void)pAction;                    \
    (void)pData;

#define ENDsetActionInfo \
    RETiRet;             \
    }

/* below is a variant of doAction where the passed-in data is not the common
 * case of string.
 */
#define BEGINdoAction_NoStrings                                                                        \
    static rsRetVal doAction(void *pMsgData, wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        DEFiRet;


/* dbgPrintInstInfo()
 * Extra comments:
 * Print debug information about this instance.
 */
#define BEGINdbgPrintInstInfo                          \
    static rsRetVal dbgPrintInstInfo(void *pModData) { \
        DEFiRet;                                       \
        instanceData *pData = NULL;

#define CODESTARTdbgPrintInstInfo     \
    pData = (instanceData *)pModData; \
    (void)pData; /* prevent compiler warning if unused! */

#define ENDdbgPrintInstInfo \
    RETiRet;                \
    }


/* parseSelectorAct()
 * Extra comments:
 * try to process a selector action line. Checks if the action
 * applies to this module and, if so, processed it. If not, it
 * is left untouched. The driver will then call another module.
 * On exit, ppModData must point to instance data. Also, a string
 * request object must be created and filled. A macro is defined
 * for that.
 * For the most usual case, we have defined a macro below.
 * If more than one string is requested, the macro can be used together
 * with own code that overwrites the entry count. In this case, the
 * macro must come before the own code. It is recommended to be
 * placed right after CODESTARTparseSelectorAct.
 */
#define BEGINparseSelectorAct                                                                      \
    static rsRetVal parseSelectorAct(uchar **pp, void **ppModData, omodStringRequest_t **ppOMSR) { \
        DEFiRet;                                                                                   \
        uchar *p;                                                                                  \
        instanceData *pData = NULL;

#define CODESTARTparseSelectorAct \
    assert(pp != NULL);           \
    assert(ppModData != NULL);    \
    assert(ppOMSR != NULL);       \
    p = *pp;

#define CODE_STD_STRING_REQUESTparseSelectorAct(NumStrReqEntries) CHKiRet(OMSRconstruct(ppOMSR, NumStrReqEntries));

#define CODE_STD_FINALIZERparseSelectorAct                                         \
    finalize_it : ATTR_UNUSED; /* semi-colon needed according to gcc doc! */       \
    if (iRet == RS_RET_OK || iRet == RS_RET_OK_WARN || iRet == RS_RET_SUSPENDED) { \
        *ppModData = pData;                                                        \
        *pp = p;                                                                   \
    } else {                                                                       \
        /* cleanup, we failed */                                                   \
        if (*ppOMSR != NULL) {                                                     \
            OMSRdestruct(*ppOMSR);                                                 \
            *ppOMSR = NULL;                                                        \
        }                                                                          \
        if (pData != NULL) {                                                       \
            freeInstance(pData);                                                   \
        }                                                                          \
    }

#define ENDparseSelectorAct \
    RETiRet;                \
    }

/* a special replacement macro for modules that do not support legacy config at all */
#define NO_LEGACY_CONF_parseSelectorAct                                                    \
    static rsRetVal parseSelectorAct(uchar **pp ATTR_UNUSED, void **ppModData ATTR_UNUSED, \
                                     omodStringRequest_t **ppOMSR ATTR_UNUSED) {           \
        return RS_RET_LEGA_ACT_NOT_SUPPORTED;                                              \
    }

/* newActInst()
 * Extra comments:
 * This creates a new instance of a the action that implements the call.
 * This is part of the conf2 (rsyslog v6) config system. It is called by
 * the core when an action object has been obtained. The output module
 * must then verify parameters and create a new action instance (if
 * parameters are acceptable) or return an error code.
 * On exit, ppModData must point to instance data. Also, a string
 * request object must be created and filled. A macro is defined
 * for that.
 * For the most usual case, we have defined a macro below.
 * If more than one string is requested, the macro can be used together
 * with own code that overwrites the entry count. In this case, the
 * macro must come before the own code. It is recommended to be
 * placed right after CODESTARTnewActInst.
 */
#define BEGINnewActInst                                                                                             \
    static rsRetVal newActInst(uchar __attribute__((unused)) * modName, struct nvlst __attribute__((unused)) * lst, \
                               void **ppModData, omodStringRequest_t **ppOMSR) {                                    \
        DEFiRet;                                                                                                    \
        instanceData *pData = NULL;                                                                                 \
        *ppOMSR = NULL;

#define CODESTARTnewActInst

#define CODE_STD_STRING_REQUESTnewActInst(NumStrReqEntries) CHKiRet(OMSRconstruct(ppOMSR, NumStrReqEntries))

#define CODE_STD_FINALIZERnewActInst                                   \
    finalize_it : if (iRet == RS_RET_OK || iRet == RS_RET_SUSPENDED) { \
        *ppModData = pData;                                            \
    } else {                                                           \
        /* cleanup, we failed */                                       \
        if (*ppOMSR != NULL) {                                         \
            OMSRdestruct(*ppOMSR);                                     \
            *ppOMSR = NULL;                                            \
        }                                                              \
        if (pData != NULL) {                                           \
            freeInstance(pData);                                       \
        }                                                              \
    }

#define ENDnewActInst \
    RETiRet;          \
    }


/* newInpInst()
 * This is basically the equivalent to newActInst() for creating input
 * module (listener) instances.
 */
#define BEGINnewInpInst                             \
    static rsRetVal newInpInst(struct nvlst *lst) { \
        DEFiRet;

#define CODESTARTnewInpInst

#define CODE_STD_FINALIZERnewInpInst

#define ENDnewInpInst \
    RETiRet;          \
    }


/* newParserInst()
 * This is basically the equivalent to newActInst() for creating parser
 * module (listener) instances.
 */
#define BEGINnewParserInst                                          \
    static rsRetVal newParserInst(struct nvlst *lst, void *pinst) { \
        instanceConf_t *inst;                                       \
        DEFiRet;

#define CODESTARTnewParserInst

#define CODE_STD_FINALIZERnewParserInst

#define ENDnewParserInst                                       \
    if (iRet == RS_RET_OK) *((instanceConf_t **)pinst) = inst; \
    RETiRet;                                                   \
    }


/* freeParserInst */
#define BEGINfreeParserInst                    \
    static rsRetVal freeParserInst(void *pi) { \
        DEFiRet;                               \
        instanceConf_t *pInst;

#define CODESTARTfreeParserInst pInst = (instanceConf_t *)pi;

#define ENDfreeParserInst           \
    if (pInst != NULL) free(pInst); \
    RETiRet;                        \
    }

/* tryResume()
 * This entry point is called to check if a module can resume operations. This
 * happens when a module requested that it be suspended. In suspended state,
 * the engine periodically tries to resume the module. If that succeeds, normal
 * processing continues. If not, the module will not be called unless a
 * tryResume() call succeeds.
 * Returns RS_RET_OK, if resumption succeeded, RS_RET_SUSPENDED otherwise
 * rgerhard, 2007-08-02
 */
#define BEGINtryResume                                                                  \
    static rsRetVal tryResume(wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        DEFiRet;

#define CODESTARTtryResume assert(pWrkrData != NULL);

#define ENDtryResume \
    RETiRet;         \
    }


/* initConfVars() - initialize pre-v6.3-config variables
 */
#define BEGINinitConfVars                \
    static rsRetVal initConfVars(void) { \
        DEFiRet;

#define CODESTARTinitConfVars

#define ENDinitConfVars \
    RETiRet;            \
    }


/* queryEtryPt()
 */
#define BEGINqueryEtryPt                                                              \
    DEFmodGetID static rsRetVal queryEtryPt(uchar *name, rsRetVal (**pEtryPoint)()) { \
        DEFiRet;

#define CODESTARTqueryEtryPt                      \
    if ((name == NULL) || (pEtryPoint == NULL)) { \
        return RS_RET_PARAM_ERROR;                \
    }                                             \
    *pEtryPoint = NULL;

#define ENDqueryEtryPt                                                   \
    if (iRet == RS_RET_OK)                                               \
        if (*pEtryPoint == NULL) {                                       \
            dbgprintf("entry point '%s' not present in module\n", name); \
            iRet = RS_RET_MODULE_ENTRY_POINT_NOT_FOUND;                  \
        }                                                                \
    RETiRet;                                                             \
    }

/** \addtogroup module_entrypoint_blocks
 *  \{
 * \brief Standard queryEtryPt block for all module types.
 *
 * Must be included in every module. This defines default queries
 * like `modExit`, `modGetID`, etc.
 */
#define CODEqueryEtryPt_STD_MOD_QUERIES         \
    if (!strcmp((char *)name, "modExit")) {     \
        *pEtryPoint = modExit;                  \
    }                                           \
    if (!strcmp((char *)name, "modGetID")) {    \
        *pEtryPoint = modGetID;                 \
    }                                           \
    if (!strcmp((char *)name, "getType")) {     \
        *pEtryPoint = modGetType;               \
    }                                           \
    if (!strcmp((char *)name, "getKeepType")) { \
        *pEtryPoint = modGetKeepType;           \
    }

/**
 * \brief Standard block for output modules without transaction support.
 */
#define CODEqueryEtryPt_STD_OMOD_QUERIES                                     \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "doAction")) { \
        *pEtryPoint = doAction;                                              \
    }                                                                        \
    if (!strcmp((char *)name, "dbgPrintInstInfo")) {                         \
        *pEtryPoint = dbgPrintInstInfo;                                      \
    }                                                                        \
    if (!strcmp((char *)name, "freeInstance")) {                             \
        *pEtryPoint = freeInstance;                                          \
    }                                                                        \
    if (!strcmp((char *)name, "parseSelectorAct")) {                         \
        *pEtryPoint = parseSelectorAct;                                      \
    }                                                                        \
    if (!strcmp((char *)name, "isCompatibleWithFeature")) {                  \
        *pEtryPoint = isCompatibleWithFeature;                               \
    }                                                                        \
    if (!strcmp((char *)name, "tryResume")) {                                \
        *pEtryPoint = tryResume;                                             \
    }

/**
 * \brief Standard block for output modules using the transaction interface.
 */
#define CODEqueryEtryPt_STD_OMODTX_QUERIES                                           \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "beginTransaction")) { \
        *pEtryPoint = beginTransaction;                                              \
    }                                                                                \
    if (!strcmp((char *)name, "commitTransaction")) {                                \
        *pEtryPoint = commitTransaction;                                             \
    }                                                                                \
    if (!strcmp((char *)name, "dbgPrintInstInfo")) {                                 \
        *pEtryPoint = dbgPrintInstInfo;                                              \
    }                                                                                \
    if (!strcmp((char *)name, "freeInstance")) {                                     \
        *pEtryPoint = freeInstance;                                                  \
    }                                                                                \
    if (!strcmp((char *)name, "parseSelectorAct")) {                                 \
        *pEtryPoint = parseSelectorAct;                                              \
    }                                                                                \
    if (!strcmp((char *)name, "isCompatibleWithFeature")) {                          \
        *pEtryPoint = isCompatibleWithFeature;                                       \
    }                                                                                \
    if (!strcmp((char *)name, "tryResume")) {                                        \
        *pEtryPoint = tryResume;                                                     \
    }

/**
 * \brief Additional methods for output module v8+ support.
 */
#define CODEqueryEtryPt_STD_OMOD8_QUERIES              \
    if (!strcmp((char *)name, "createWrkrInstance")) { \
        *pEtryPoint = createWrkrInstance;              \
    }                                                  \
    if (!strcmp((char *)name, "freeWrkrInstance")) {   \
        *pEtryPoint = freeWrkrInstance;                \
    }

/**
 * \brief For output modules with transaction interface extension.
 */
#define CODEqueryEtryPt_TXIF_OMOD_QUERIES            \
    if (!strcmp((char *)name, "beginTransaction")) { \
        *pEtryPoint = beginTransaction;              \
    }                                                \
    if (!strcmp((char *)name, "endTransaction")) {   \
        *pEtryPoint = endTransaction;                \
    }

/**
 * \brief Optional support for feature compatibility query.
 */
#define CODEqueryEtryPt_IsCompatibleWithFeature_IF_OMOD_QUERIES \
    if (!strcmp((char *)name, "isCompatibleWithFeature")) {     \
        *pEtryPoint = isCompatibleWithFeature;                  \
    }

#define CODEqueryEtryPt_SetActionInfo_IF_OMOD_QUERIES \
    if (!strcmp((char *)name, "setActionInfo")) {     \
        *pEtryPoint = setActionInfo;                  \
    }

/**
 * \brief Standard block for input modules.
 */
#define CODEqueryEtryPt_STD_IMOD_QUERIES                                     \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "runInput")) { \
        *pEtryPoint = runInput;                                              \
    }                                                                        \
    if (!strcmp((char *)name, "willRun")) {                                  \
        *pEtryPoint = willRun;                                               \
    }                                                                        \
    if (!strcmp((char *)name, "afterRun")) {                                 \
        *pEtryPoint = afterRun;                                              \
    }

/**
 * \brief For modules using the config interface v2.
 */
#define CODEqueryEtryPt_STD_CONF2_QUERIES        \
    if (!strcmp((char *)name, "beginCnfLoad")) { \
        *pEtryPoint = beginCnfLoad;              \
    }                                            \
    if (!strcmp((char *)name, "endCnfLoad")) {   \
        *pEtryPoint = endCnfLoad;                \
    }                                            \
    if (!strcmp((char *)name, "checkCnf")) {     \
        *pEtryPoint = checkCnf;                  \
    }                                            \
    if (!strcmp((char *)name, "activateCnf")) {  \
        *pEtryPoint = activateCnf;               \
    }                                            \
    if (!strcmp((char *)name, "freeCnf")) {      \
        *pEtryPoint = freeCnf;                   \
    }                                            \
    CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES

#define CODEqueryEtryPt_STD_CONF2_setModCnf_QUERIES \
    if (!strcmp((char *)name, "setModCnf")) {       \
        *pEtryPoint = setModCnf;                    \
    }

#define CODEqueryEtryPt_STD_CONF2_OMOD_QUERIES \
    if (!strcmp((char *)name, "newActInst")) { \
        *pEtryPoint = newActInst;              \
    }                                          \
    CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES

#define CODEqueryEtryPt_STD_CONF2_IMOD_QUERIES \
    if (!strcmp((char *)name, "newInpInst")) { \
        *pEtryPoint = newInpInst;              \
    }                                          \
    CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES

#define CODEqueryEtryPt_STD_CONF2_PREPRIVDROP_QUERIES      \
    if (!strcmp((char *)name, "activateCnfPrePrivDrop")) { \
        *pEtryPoint = activateCnfPrePrivDrop;              \
    }

/**
 * \brief Config interface v6 module name support.
 */
#define CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES \
    if (!strcmp((char *)name, "getModCnfName")) { \
        *pEtryPoint = modGetCnfName;              \
    }

/**
 * \brief Standard block for library modules.
 */
#define CODEqueryEtryPt_STD_LIB_QUERIES CODEqueryEtryPt_STD_MOD_QUERIES

/**
 * \brief Standard block for parser modules.
 */
#define CODEqueryEtryPt_STD_PMOD_QUERIES                                  \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "parse")) { \
        *pEtryPoint = parse;                                              \
    }                                                                     \
    if (!strcmp((char *)name, "GetParserName")) {                         \
        *pEtryPoint = GetParserName;                                      \
    }

/**
 * \brief Standard block for parser modules using config v2.
 */
#define CODEqueryEtryPt_STD_PMOD2_QUERIES                                  \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "parse2")) { \
        *pEtryPoint = parse2;                                              \
    }                                                                      \
    if (!strcmp((char *)name, "GetParserName")) {                          \
        *pEtryPoint = GetParserName;                                       \
    }                                                                      \
    if (!strcmp((char *)name, "newParserInst")) {                          \
        *pEtryPoint = newParserInst;                                       \
    }                                                                      \
    if (!strcmp((char *)name, "checkParserInst")) {                        \
        *pEtryPoint = checkParserInst;                                     \
    }                                                                      \
    if (!strcmp((char *)name, "freeParserInst")) {                         \
        *pEtryPoint = freeParserInst;                                      \
    }                                                                      \
    CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES

/**
 * \brief Standard block for rscript function modules.
 */
#define CODEqueryEtryPt_STD_FMOD_QUERIES                                          \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "getFunctArray")) { \
        *pEtryPoint = getFunctArray;                                              \
    }

/**
 * \brief Standard block for strgen modules.
 */
#define CODEqueryEtryPt_STD_SMOD_QUERIES                                   \
    CODEqueryEtryPt_STD_MOD_QUERIES if (!strcmp((char *)name, "strgen")) { \
        *pEtryPoint = strgen;                                              \
    }                                                                      \
    if (!strcmp((char *)name, "GetName")) {                                \
        *pEtryPoint = GetStrgenName;                                       \
    }
/** \} */  // end of module_entrypoint_blocks


/* modInit()
 * This has an extra parameter, which is the specific name of the modInit
 * function. That is needed for built-in modules, which must have unique
 * names in order to link statically. Please note that this is always only
 * the case with modInit() and NO other entry point. The reason is that only
 * modInit() is visible form a linker/loader point of view. All other entry
 * points are passed via rsyslog-internal query functions and are defined
 * static inside the modules source. This is an important concept, as it allows
 * us to support different interface versions within a single module. (Granted,
 * we do not currently have different interface versions, so we can not put
 * it to a test - but our firm believe is that we can do all abstraction needed...)
 *
 * Extra Comments:
 * initialize the module
 *
 * Later, much more must be done. So far, we only return a pointer
 * to the queryEtryPt() function
 * TODO: do interface version checking & handshaking
 * iIfVersRequetsed is the version of the interface specification that the
 * caller would like to see being used. ipIFVersProvided is what we
 * decide to provide.
 * rgerhards, 2007-11-21: see modExit() comment below for important information
 * on the need to initialize static data with code. modInit() may be called on a
 * cached, left-in-memory copy of a previous incarnation.
 */
#define BEGINmodInit(uniqName)                                                                                 \
    rsRetVal __attribute__((unused)) modInit##uniqName(                                                        \
        int iIFVersRequested __attribute__((unused)), int *ipIFVersProvided, rsRetVal (**pQueryEtryPt)(),      \
        rsRetVal (*pHostQueryEtryPt)(uchar *, rsRetVal(**)()), modInfo_t __attribute__((unused)) * pModInfo);  \
    rsRetVal __attribute__((unused)) modInit##uniqName(                                                        \
        int iIFVersRequested __attribute__((unused)), int *ipIFVersProvided, rsRetVal (**pQueryEtryPt)(),      \
        rsRetVal (*pHostQueryEtryPt)(uchar *, rsRetVal(**)()), modInfo_t __attribute__((unused)) * pModInfo) { \
        DEFiRet;                                                                                               \
        rsRetVal (*pObjGetObjInterface)(obj_if_t * pIf);

/*
 * Variant for modules that already publish modInit prototypes in headers.
 * This avoids duplicate declarations while preserving missing-prototype
 * coverage for modules that still rely on BEGINmodInit's local predecl.
 */
#define BEGINmodInitNoPredecl(uniqName)                                                                        \
    rsRetVal __attribute__((unused)) modInit##uniqName(                                                        \
        int iIFVersRequested __attribute__((unused)), int *ipIFVersProvided, rsRetVal (**pQueryEtryPt)(),      \
        rsRetVal (*pHostQueryEtryPt)(uchar *, rsRetVal(**)()), modInfo_t __attribute__((unused)) * pModInfo) { \
        DEFiRet;                                                                                               \
        rsRetVal (*pObjGetObjInterface)(obj_if_t * pIf);

#define CODESTARTmodInit                                                               \
    assert(pHostQueryEtryPt != NULL);                                                  \
    iRet = pHostQueryEtryPt((uchar *)"objGetObjInterface", &pObjGetObjInterface);      \
    if ((iRet != RS_RET_OK) || (pQueryEtryPt == NULL) || (ipIFVersProvided == NULL) || \
        (pObjGetObjInterface == NULL)) {                                               \
        return (iRet == RS_RET_OK) ? RS_RET_PARAM_ERROR : iRet;                        \
    }                                                                                  \
    /* now get the obj interface so that we can access other objects */                \
    CHKiRet(pObjGetObjInterface(&obj))

/* do those initializations necessary for legacy config variables */
#define INITLegCnfVars initConfVars()

#define ENDmodInit                             \
    finalize_it : *pQueryEtryPt = queryEtryPt; \
    RETiRet;                                   \
    }


/* now come some check functions, which enable a standard way of obtaining feature
 * information from the core. feat is the to-be-tested feature and featVar is a
 * variable that receives the result (0-not support, 1-supported).
 * This must be a macro, so that it is put into the output's code. Otherwise, we
 * would need to rely on a library entry point, which is what we intend to avoid ;)
 * rgerhards, 2009-04-27
 */
#define INITChkCoreFeature(featVar, feat)                                                            \
    {                                                                                                \
        rsRetVal MACRO_Ret;                                                                          \
        rsRetVal (*pQueryCoreFeatureSupport)(int *, unsigned);                                       \
        int bSupportsIt;                                                                             \
        featVar = 0;                                                                                 \
        MACRO_Ret = pHostQueryEtryPt((uchar *)"queryCoreFeatureSupport", &pQueryCoreFeatureSupport); \
        if (MACRO_Ret == RS_RET_OK) {                                                                \
            /* found entry point, so let's see if core supports it */                                \
            CHKiRet((*pQueryCoreFeatureSupport)(&bSupportsIt, feat));                                \
            if (bSupportsIt) featVar = 1;                                                            \
        } else if (MACRO_Ret != RS_RET_ENTRY_POINT_NOT_FOUND) {                                      \
            ABORT_FINALIZE(MACRO_Ret); /* Something else went wrong, what is not acceptable */       \
        }                                                                                            \
    }


/* definitions for host API queries */
#define CODEmodInit_QueryRegCFSLineHdlr CHKiRet(pHostQueryEtryPt((uchar *)"regCfSysLineHdlr", &omsdRegCFSLineHdlr));


/* modExit()
 * This is the counterpart to modInit(). It destroys a module and makes it ready for
 * unloading. It is similiar to freeInstance() for the instance data. Please note that
 * this entry point needs to free any module-global data structures and registrations.
 * For example, the CfSysLineHandlers a module has registered need to be unregistered
 * here. This entry point is only called immediately before unloading of the module. So
 * it is likely to be destroyed. HOWEVER, the caller may decide to keep the module cached.
 * So a module must never assume that it is actually destroyed. A call to modInit() may
 * happen immediately after modExit(). So a module can NOT assume that static data elements
 * are being re-initialized by the loader - this must always be done by module code itself.
 * It is suggested to do this in modInit(). - rgerhards, 2007-11-21
 */
#define BEGINmodExit                \
    static rsRetVal modExit(void) { \
        DEFiRet;

#define CODESTARTmodExit

#define ENDmodExit \
    RETiRet;       \
    }


/* beginCnfLoad()
 * This is a function tells an input module that a new config load begins.
 * The core passes in a handle to the new module-specific module conf to
 * the module. -- rgerards, 2011-05-03
 */
#define BEGINbeginCnfLoad                                                                        \
    static rsRetVal beginCnfLoad(modConfData_t **ptr, __attribute__((unused)) rsconf_t *pConf) { \
        modConfData_t *pModConf;                                                                 \
        DEFiRet;

#define CODESTARTbeginCnfLoad                                    \
    if ((pModConf = calloc(1, sizeof(modConfData_t))) == NULL) { \
        *ptr = NULL;                                             \
        return RS_RET_OUT_OF_MEMORY;                             \
    }

#define ENDbeginCnfLoad \
    *ptr = pModConf;    \
    RETiRet;            \
    }


/* setModCnf()
 * This function permits to set module global parameters via the v2 config
 * interface. It may be called multiple times, but parameters must not be
 * set in a conflicting way. The module must use its current config load
 * context when processing the directives.
 * Note that lst may be NULL, especially if the module is loaded via the
 * legacy config system. The module must check for this.
 * NOTE: This entry point must only be implemented if module global
 * parameters are actually required.
 */
#define BEGINsetModCnf                             \
    static rsRetVal setModCnf(struct nvlst *lst) { \
        DEFiRet;

#define CODESTARTsetModCnf

#define ENDsetModCnf \
    RETiRet;         \
    }


/* endCnfLoad()
 * This is a function tells an input module that the current config load ended.
 * It gets a last chance to make changes to its in-memory config object. After
 * this call, the config object must no longer be changed.
 * The pModConf pointer passed into the module must no longer be used.
 * rgerards, 2011-05-03
 */
#define BEGINendCnfLoad                                                         \
    static rsRetVal endCnfLoad(modConfData_t *ptr) {                            \
        modConfData_t __attribute__((unused)) *pModConf = (modConfData_t *)ptr; \
        DEFiRet;

#define CODESTARTendCnfLoad

#define ENDendCnfLoad \
    RETiRet;          \
    }


/* checkCnf()
 * Check the provided config object for errors, inconsistencies and other things
 * that do not work out.
 * NOTE: no part of the config must be activated, so some checks that require
 * activation can not be done in this entry point. They must be done in the
 * activateConf() stage, where the caller must also be prepared for error
 * returns.
 * rgerhards, 2011-05-03
 */
#define BEGINcheckCnf                                                           \
    static rsRetVal checkCnf(modConfData_t *ptr) {                              \
        modConfData_t __attribute__((unused)) *pModConf = (modConfData_t *)ptr; \
        DEFiRet;

#define CODESTARTcheckCnf

#define ENDcheckCnf \
    RETiRet;        \
    }

/* checkParserInst() - verifies a parser instance configuration */
#define BEGINcheckParserInst                                                   \
    static rsRetVal checkParserInst(void *const ptr) {                         \
        instanceConf_t __attribute__((unused)) *pInst = (instanceConf_t *)ptr; \
        DEFiRet;

#define CODESTARTcheckParserInst

#define ENDcheckParserInst \
    RETiRet;               \
    }


/* activateCnfPrePrivDrop()
 * Initial config activation, before dropping privileges. This is an optional
 * entry points that should only be implemented by those module that really need
 * it. Processing should be limited to the minimum possible. Main activation
 * should happen in the normal activateCnf() call.
 * rgerhards, 2011-05-06
 */
#define BEGINactivateCnfPrePrivDrop                              \
    static rsRetVal activateCnfPrePrivDrop(modConfData_t *ptr) { \
        modConfData_t *pModConf = (modConfData_t *)ptr;          \
        DEFiRet;

#define CODESTARTactivateCnfPrePrivDrop

#define ENDactivateCnfPrePrivDrop \
    RETiRet;                      \
    }


/* activateCnf()
 * This activates the provided config, and may report errors if they are detected
 * during activation.
 * rgerhards, 2011-05-03
 */
#define BEGINactivateCnf                                                        \
    static rsRetVal activateCnf(modConfData_t *ptr) {                           \
        modConfData_t __attribute__((unused)) *pModConf = (modConfData_t *)ptr; \
        DEFiRet;

#define CODESTARTactivateCnf

#define ENDactivateCnf \
    RETiRet;           \
    }


/* freeCnf()
 * This is a function tells an input module that it must free all data
 * associated with the passed-in module config.
 * rgerhards, 2011-05-03
 */
#define BEGINfreeCnf                                    \
    static rsRetVal freeCnf(void *ptr) {                \
        modConfData_t *pModConf = (modConfData_t *)ptr; \
        DEFiRet;

#define CODESTARTfreeCnf

#define ENDfreeCnf                                                               \
    if (pModConf != NULL) free(pModConf); /* we need to free this in any case */ \
    RETiRet;                                                                     \
    }


/* runInput()
 * This is the main function for input modules. It is used to gather data from the
 * input source and submit it to the message queue. Each runInput() instance has its own
 * thread. This is handled by the rsyslog engine. It needs to spawn off new threads only
 * if there is a module-internal need to do so.
 */
#define BEGINrunInput                                                      \
    static rsRetVal runInput(thrdInfo_t __attribute__((unused)) * pThrd) { \
        DEFiRet;

#define CODESTARTrunInput dbgSetThrdName((uchar *)__FILE__); /* we need to provide something better later */

#define ENDrunInput \
    RETiRet;        \
    }


/* willRun()
 * This is a function that will be replaced in the longer term. It is used so
 * that a module can tell the caller if it will run or not. This is to be replaced
 * when we introduce input module instances. However, these require config syntax
 * changes and I may (or may not... ;)) hold that until another config file
 * format is available. -- rgerhards, 2007-12-17
 * returns RS_RET_NO_RUN if it will not run (RS_RET_OK or error otherwise)
 */
#define BEGINwillRun                \
    static rsRetVal willRun(void) { \
        DEFiRet;

#define CODESTARTwillRun

#define ENDwillRun \
    RETiRet;       \
    }


/* afterRun()
 * This function is called after an input module has been run and its thread has
 * been terminated. It shall do any necessary cleanup.
 * This is expected to evolve into a freeInstance type of call once the input module
 * interface evolves to support multiple instances.
 * rgerhards, 2007-12-17
 */
#define BEGINafterRun                \
    static rsRetVal afterRun(void) { \
        DEFiRet;

#define CODESTARTafterRun

#define ENDafterRun \
    RETiRet;        \
    }


/* doHUP()
 * This function is optional. Currently, it is available to output plugins
 * only, but may be made available to other types of plugins in the future.
 * A plugin does not need to define this entry point. If if does, it gets
 * called when a HUP at the action level is to be done. A plugin should register
 * this function so that it can close files, connection or other resources
 * on HUP - if it can be assume the user wanted to do this as a part of HUP
 * processing. Note that the name "HUP" has historical reasons, it stems back
 * to the infamous SIGHUP which was sent to restart a syslogd. We still retain
 * that legacy, but may move this to a different signal.
 * rgerhards, 2008-10-22
 */
#define CODEqueryEtryPt_doHUP             \
    if (!strcmp((char *)name, "doHUP")) { \
        *pEtryPoint = doHUP;              \
    }
#define BEGINdoHUP                                                        \
    static rsRetVal doHUP(instanceData __attribute__((unused)) * pData) { \
        DEFiRet;

#define CODESTARTdoHUP

#define ENDdoHUP \
    RETiRet;     \
    }

/* doHUPParser()
 */
#define CODEqueryEtryPt_doHUPParser       \
    if (!strcmp((char *)name, "doHUP")) { \
        *pEtryPoint = doHUP;              \
    }
#define BEGINdoHUPParser                                                    \
    static rsRetVal doHUP(instanceConf_t __attribute__((unused)) * pData) { \
        DEFiRet;

#define CODESTARTdoHUPParser

#define ENDdoHUPParser \
    RETiRet;           \
    }


/* doHUPWrkr()
 * This is like doHUP(), but on an action worker level.
 * rgerhards, 2015-03-25
 */
#define CODEqueryEtryPt_doHUPWrkr             \
    if (!strcmp((char *)name, "doHUPWrkr")) { \
        *pEtryPoint = doHUPWrkr;              \
    }
#define BEGINdoHUPWrkr                                                                  \
    static rsRetVal doHUPWrkr(wrkrInstanceData_t __attribute__((unused)) * pWrkrData) { \
        DEFiRet;

#define CODESTARTdoHUPWrkr

#define ENDdoHUPWrkr \
    RETiRet;         \
    }


/* SetShutdownImmdtPtr()
 * This function is optional. If defined by an output plugin, it is called
 * each time the action is invoked to set the "ShutdownImmediate" pointer,
 * which is used during termination to indicate the action should shutdown
 * as quickly as possible.
 */
#define CODEqueryEtryPt_SetShutdownImmdtPtr                  \
    else if (!strcmp((char *)name, "SetShutdownImmdtPtr")) { \
        *pEtryPoint = SetShutdownImmdtPtr;                   \
    }
#define BEGINSetShutdownImmdtPtr                                                                   \
    static rsRetVal SetShutdownImmdtPtr(instanceData __attribute__((unused)) * pData, int *pPtr) { \
        DEFiRet;

#define CODESTARTSetShutdownImmdtPtr

#define ENDSetShutdownImmdtPtr \
    RETiRet;                   \
    }


/* parse() - main entry point of parser modules (v1 config interface)
 */
#define BEGINparse                        \
    static rsRetVal parse(smsg_t *pMsg) { \
        DEFiRet;

#define CODESTARTparse assert(pMsg != NULL);

#define ENDparse \
    RETiRet;     \
    }


/* parse2() - main entry point of parser modules (v2+ config interface)
 */
#define BEGINparse2                                                     \
    static rsRetVal parse2(instanceConf_t *const pInst, smsg_t *pMsg) { \
        DEFiRet;

#define CODESTARTparse2    \
    assert(pInst != NULL); \
    assert(pMsg != NULL);

#define ENDparse2 \
    RETiRet;      \
    }


/* strgen() - main entry point of parser modules
 * Note that we do NOT use size_t as this permits us to store the
 * values directly into optimized heap structures.
 * ppBuf is the buffer pointer
 * pLenBuf is the current max size of this buffer
 * pStrLen is an output parameter that MUST hold the length
 *         of the generated string on exit (this is cached)
 */
#define BEGINstrgen                                                              \
    static rsRetVal strgen(smsg_t *const pMsg, actWrkrIParams_t *const iparam) { \
        DEFiRet;

#define CODESTARTstrgen assert(pMsg != NULL);

#define ENDstrgen \
    RETiRet;      \
    }


/* getFunctArray() - main entry point of parser modules
 * Note that we do NOT use size_t as this permits us to store the
 * values directly into optimized heap structures.
 * ppBuf is the buffer pointer
 * pLenBuf is the current max size of this buffer
 * pStrLen is an output parameter that MUST hold the length
 *         of the generated string on exit (this is cached)
 */
#define BEGINgetFunctArray                                                                           \
    static rsRetVal getFunctArray(int *const version, const struct scriptFunct **const functArray) { \
        DEFiRet;

#define CODESTARTgetFunctArray

#define ENDgetFunctArray \
    RETiRet;             \
    }


/* function to specify the parser name. This is done via a single command which
 * receives a ANSI string as parameter.
 */
#define PARSER_NAME(x)                            \
    static rsRetVal GetParserName(uchar **ppSz) { \
        *ppSz = UCHAR_CONSTANT(x);                \
        return RS_RET_OK;                         \
    }


/* function to specify the strgen name. This is done via a single command which
 * receives a ANSI string as parameter.
 */
#define STRGEN_NAME(x)                            \
    static rsRetVal GetStrgenName(uchar **ppSz) { \
        *ppSz = UCHAR_CONSTANT(x);                \
        return RS_RET_OK;                         \
    }

#endif /* #ifndef MODULE_TEMPLATE_H_INCLUDED */