tools/ompipe.c - main - githubmirror/rsyslog

tools/ompipe.c
425 строк13 KB
Rainer Gerhards
Apply suggested fix to tools/ompipe.c from Copilot Autofix
11 май 2026, 10:16
11 май 2026, 10:16f1f857e
/* ompipe.c
 * This is the implementation of the build-in pipe output module.
 * Note that this module stems back to the "old" (4.4.2 and below)
 * omfile. There were some issues with the new omfile code and pipes
 * (namely in regard to xconsole), so we took out the pipe code and moved
 * that to a separate module. That a) immediately solves the issue for a
 * less common use case and probably makes it much easier to enhance
 * file and pipe support (now independently) in the future (we always
 * needed to think about pipes in omfile so far, what we now no longer
 * need to, hopefully resulting in reduction of complexity).
 *
 * NOTE: read comments in module-template.h to understand how this pipe
 *       works!
 *
 * Copyright 2007-2026 Rainer Gerhards and Adiscon GmbH.
 *
 * This file is part of rsyslog.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *       http://www.apache.org/licenses/LICENSE-2.0
 *       -or-
 *       see COPYING.ASL20 in the source distribution
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "config.h"
#include <stdio.h>
#include <stdarg.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/file.h>

#include "rsyslog.h"
#include "syslogd.h"
#include "syslogd-types.h"
#include "srUtils.h"
#include "template.h"
#include "ompipe.h"
#include "omfile.h" /* for dirty trick: access to $ActionFileDefaultTemplate value */
#include "cfsysline.h"
#include "module-template.h"
#include "conf.h"
#include "errmsg.h"

MODULE_TYPE_OUTPUT;
MODULE_TYPE_NOKEEP;
MODULE_CNFNAME("ompipe")

/* internal structures
 */
DEF_OMOD_STATIC_DATA;


typedef struct _instanceData {
    uchar *pipe; /* pipe or template name (display only) */
    uchar *tplName; /* format template to use */
    short fd; /* pipe descriptor for (current) pipe */
    pthread_mutex_t mutWrite; /* guard against multiple instances writing to same pipe */
    sbool bHadError; /* did we already have/report an error on this pipe? */
    sbool bTryResumeReopen; /* should we attempt to reopen the pipe on action resume? */
} instanceData;

typedef struct wrkrInstanceData {
    instanceData *pData;
} wrkrInstanceData_t;

typedef struct configSettings_s {
    EMPTY_STRUCT
} configSettings_t;
static configSettings_t __attribute__((unused)) cs;

/* tables for interfacing with the v6 config system */
/* module-global parameters */
static struct cnfparamdescr modpdescr[] = {
    {"template", eCmdHdlrGetWord, 0},
};
static struct cnfparamblk modpblk = {CNFPARAMBLK_VERSION, sizeof(modpdescr) / sizeof(struct cnfparamdescr), modpdescr};

/* action (instance) parameters */
static struct cnfparamdescr actpdescr[] = {
    {"pipe", eCmdHdlrString, CNFPARAM_REQUIRED},
    {"template", eCmdHdlrGetWord, 0},
    {"tryResumeReopen", eCmdHdlrBinary, 0},
};
static struct cnfparamblk actpblk = {CNFPARAMBLK_VERSION, sizeof(actpdescr) / sizeof(struct cnfparamdescr), actpdescr};

struct modConfData_s {
    rsconf_t *pConf; /* our overall config object */
    uchar *tplName; /* default template */
};

static modConfData_t *loadModConf = NULL; /* modConf ptr to use for the current load process */
static modConfData_t *runModConf = NULL; /* modConf ptr to use for the current exec process */

/* this function gets the default template */
static uchar *getDfltTpl(void) {
    if (loadModConf != NULL && loadModConf->tplName != NULL)
        return loadModConf->tplName;
    else
        return (uchar *)"RSYSLOG_FileFormat";
}


BEGINinitConfVars /* (re)set config variables to default values */
    CODESTARTinitConfVars;
ENDinitConfVars


BEGINisCompatibleWithFeature
    CODESTARTisCompatibleWithFeature;
    if (eFeat == sFEATURERepeatedMsgReduction) iRet = RS_RET_OK;
ENDisCompatibleWithFeature


BEGINdbgPrintInstInfo
    CODESTARTdbgPrintInstInfo;
    dbgprintf("pipe %s", pData->pipe);
    if (pData->fd == -1) dbgprintf(" (unused)");
ENDdbgPrintInstInfo


/* This is now shared code for all types of files. It simply prepares
 * pipe access, which, among others, means the the pipe wil be opened
 * and any directories in between will be created (based on config, of
 * course). -- rgerhards, 2008-10-22
 * changed to iRet interface - 2009-03-19
 */
static rsRetVal preparePipe(instanceData *pData) {
    DEFiRet;
    pData->fd = open((char *)pData->pipe, O_RDWR | O_NONBLOCK | O_CLOEXEC);
    if (pData->fd < 0) {
        pData->fd = -1;
        if (!pData->bHadError) {
            LogError(errno, RS_RET_NO_FILE_ACCESS, "Could not open output pipe '%s':", pData->pipe);
            pData->bHadError = 1;
        }
        DBGPRINTF("Error opening log pipe: %s\n", pData->pipe);
    }
    RETiRet;
}


/* rgerhards 2004-11-11: write to a pipe output. This
 * will be called for all outputs using pipe semantics,
 * for example also for pipes.
 */
static rsRetVal writePipe(uchar **ppString, instanceData *pData) {
    int iLenWritten;
    DEFiRet;

    assert(pData != NULL);

    if (pData->fd == -1) {
        rsRetVal iRetLocal;
        iRetLocal = preparePipe(pData);
        if ((iRetLocal != RS_RET_OK) || (pData->fd == -1))
            ABORT_FINALIZE(RS_RET_SUSPENDED); /* whatever the failure was, we need to retry */
    }

    /* create the message based on format specified */
    iLenWritten = write(pData->fd, ppString[0], strlen((char *)ppString[0]));
    if (iLenWritten < 0) {
        const int e = errno;
        /* If a named pipe is full, we suspend this action for a while */
        if (e == EAGAIN) ABORT_FINALIZE(RS_RET_SUSPENDED);

        close(pData->fd);
        pData->fd = -1; /* tell that fd is no longer open! */
        iRet = RS_RET_SUSPENDED;
        LogError(e, NO_ERRCODE, "write error on pipe %s", pData->pipe);
    }

finalize_it:
    RETiRet;
}


BEGINbeginCnfLoad
    CODESTARTbeginCnfLoad;
    loadModConf = pModConf;
    pModConf->pConf = pConf;
    pModConf->tplName = NULL;
ENDbeginCnfLoad

BEGINsetModCnf
    struct cnfparamvals *pvals = NULL;
    int i;
    CODESTARTsetModCnf;
    pvals = nvlstGetParams(lst, &modpblk, NULL);
    if (pvals == NULL) {
        LogError(0, RS_RET_MISSING_CNFPARAMS,
                 "error processing module "
                 "config parameters [module(...)]");
        ABORT_FINALIZE(RS_RET_MISSING_CNFPARAMS);
    }

    if (Debug) {
        dbgprintf("module (global) param blk for ompipe:\n");
        cnfparamsPrint(&modpblk, pvals);
    }

    for (i = 0; i < modpblk.nParams; ++i) {
        if (!pvals[i].bUsed) continue;
        if (!strcmp(modpblk.descr[i].name, "template")) {
            CHKmalloc(loadModConf->tplName = (uchar *)es_str2cstr(pvals[i].val.d.estr, NULL));
            if (pszFileDfltTplName != NULL) {
                LogError(0, RS_RET_DUP_PARAM,
                         "ompipe: warning: default template "
                         "was already set via legacy directive - may lead to inconsistent "
                         "results.");
            }
        } else {
            dbgprintf(
                "ompipe: program error, non-handled "
                "param '%s' in beginCnfLoad\n",
                modpblk.descr[i].name);
        }
    }
finalize_it:
    if (pvals != NULL) cnfparamvalsDestruct(pvals, &modpblk);
ENDsetModCnf

BEGINendCnfLoad
    CODESTARTendCnfLoad;
    loadModConf = NULL; /* done loading */
    /* free legacy config vars */
    free(pszFileDfltTplName);
    pszFileDfltTplName = NULL;
ENDendCnfLoad

BEGINcheckCnf
    CODESTARTcheckCnf;
ENDcheckCnf

BEGINactivateCnf
    CODESTARTactivateCnf;
    runModConf = pModConf;
ENDactivateCnf

BEGINfreeCnf
    CODESTARTfreeCnf;
    free(pModConf->tplName);
ENDfreeCnf

BEGINcreateInstance
    CODESTARTcreateInstance;
    pData->pipe = NULL;
    pData->fd = -1;
    pData->bHadError = 0;
    pData->bTryResumeReopen = 0;
    pthread_mutex_init(&pData->mutWrite, NULL);
ENDcreateInstance


BEGINcreateWrkrInstance
    CODESTARTcreateWrkrInstance;
ENDcreateWrkrInstance


BEGINfreeInstance
    CODESTARTfreeInstance;
    pthread_mutex_destroy(&pData->mutWrite);
    free(pData->pipe);
    if (pData->fd != -1) close(pData->fd);
ENDfreeInstance


BEGINfreeWrkrInstance
    CODESTARTfreeWrkrInstance;
ENDfreeWrkrInstance


BEGINtryResume
    instanceData *__restrict__ const pData = pWrkrData->pData;
    fd_set wrds;
    struct timeval tv;
    int ready;
    CODESTARTtryResume;
    if (pData->fd == -1) {
        rsRetVal iRetLocal;
        iRetLocal = preparePipe(pData);
        if ((iRetLocal != RS_RET_OK) || (pData->fd == -1)) ABORT_FINALIZE(RS_RET_SUSPENDED);
    } else {
        /* we can reach this if the pipe is full, so we need
         * to check if we can write again. /dev/xconsole is the
         * ugly example of why this is necessary.
         */
        FD_ZERO(&wrds);
        FD_SET(pData->fd, &wrds);
        tv.tv_sec = 0;
        tv.tv_usec = 0;
        ready = select(pData->fd + 1, NULL, &wrds, NULL, &tv);
        DBGPRINTF("ompipe: tryResume: ready to write fd %d: %d\n", pData->fd, ready);
        if (ready != 1) {
            if (pData->bTryResumeReopen && pData->fd != -1) {
                close(pData->fd);
                pData->fd = -1;
            }
            ABORT_FINALIZE(RS_RET_SUSPENDED);
        }
    }
finalize_it:
ENDtryResume

BEGINdoAction
    instanceData *pData;
    CODESTARTdoAction;
    pData = pWrkrData->pData;
    DBGPRINTF("ompipe: writing to %s\n", pData->pipe);
    /* this module is single-threaded by nature */
    pthread_mutex_lock(&pData->mutWrite);
    iRet = writePipe(ppString, pData);
    pthread_mutex_unlock(&pData->mutWrite);
ENDdoAction


static inline void setInstParamDefaults(instanceData *pData) {
    pData->tplName = NULL;
}

BEGINnewActInst
    struct cnfparamvals *pvals;
    int i;
    CODESTARTnewActInst;
    if ((pvals = nvlstGetParams(lst, &actpblk, NULL)) == NULL) {
        ABORT_FINALIZE(RS_RET_MISSING_CNFPARAMS);
    }

    CHKiRet(createInstance(&pData));
    setInstParamDefaults(pData);

    CODE_STD_STRING_REQUESTnewActInst(1);
    for (i = 0; i < actpblk.nParams; ++i) {
        if (!pvals[i].bUsed) continue;
        if (!strcmp(actpblk.descr[i].name, "pipe")) {
            CHKmalloc(pData->pipe = (uchar *)es_str2cstr(pvals[i].val.d.estr, NULL));
        } else if (!strcmp(actpblk.descr[i].name, "template")) {
            CHKmalloc(pData->tplName = (uchar *)es_str2cstr(pvals[i].val.d.estr, NULL));
        } else if (!strcmp(actpblk.descr[i].name, "tryResumeReopen")) {
            pData->bTryResumeReopen = (int)pvals[i].val.d.n;
        } else {
            dbgprintf(
                "ompipe: program error, non-handled "
                "param '%s'\n",
                actpblk.descr[i].name);
        }
    }

    CHKiRet(OMSRsetEntry(*ppOMSR, 0,
                         (uchar *)strdup((pData->tplName == NULL) ? "RSYSLOG_FileFormat" : (char *)pData->tplName),
                         OMSR_NO_RQD_TPL_OPTS));
    CODE_STD_FINALIZERnewActInst;
    cnfparamvalsDestruct(pvals, &actpblk);
ENDnewActInst

BEGINparseSelectorAct
    CODESTARTparseSelectorAct;
    /* yes, the if below is redundant, but I need it now. Will go away as
     * the code further changes.  -- rgerhards, 2007-07-25
     */
    if (*p == '|') {
        if ((iRet = createInstance(&pData)) != RS_RET_OK) {
            return iRet; /* this can not use RET_iRet! */
        }
    } else {
        /* this is not clean, but we need it for the time being
         * TODO: remove when cleaning up modularization
         */
        return RS_RET_CONFLINE_UNPROCESSED;
    }

    CODE_STD_STRING_REQUESTparseSelectorAct(1) CHKmalloc(pData->pipe = malloc(512));
    ++p;
    CHKiRet(cflineParseFileName(p, (uchar *)pData->pipe, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS, getDfltTpl()));

    CODE_STD_FINALIZERparseSelectorAct
ENDparseSelectorAct


BEGINdoHUP
    CODESTARTdoHUP;
    pthread_mutex_lock(&pData->mutWrite);
    if (pData->fd != -1) {
        close(pData->fd);
        pData->fd = -1;
    }
    pthread_mutex_unlock(&pData->mutWrite);
ENDdoHUP


BEGINmodExit
    CODESTARTmodExit;
ENDmodExit


BEGINqueryEtryPt
    CODESTARTqueryEtryPt;
    CODEqueryEtryPt_STD_OMOD_QUERIES;
    CODEqueryEtryPt_STD_OMOD8_QUERIES;
    CODEqueryEtryPt_doHUP CODEqueryEtryPt_STD_CONF2_QUERIES;
    CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES;
    CODEqueryEtryPt_STD_CONF2_setModCnf_QUERIES;
    CODEqueryEtryPt_STD_CONF2_OMOD_QUERIES;
ENDqueryEtryPt


BEGINmodInitNoPredecl(Pipe)
    CODESTARTmodInit;
    INITLegCnfVars;
    *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */
    CODEmodInit_QueryRegCFSLineHdlr
ENDmodInit
/* vi:set ai:
 */