/
githubmirror
/
rsyslog
Обзор
Документация
Войти
/
githubmirror
/
rsyslog
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
main
runtime/libossl.c
679 строк
19 KB
Rainer Gerhards
runtime: cleanup zero-size alloc handling
12 апр 2026, 18:38
12 апр 2026, 18:38
d0d84a8
Код
Авторство
О чём код?
/* libossl.c - rsyslog's openssl based crypto provider * * * We need to store some additional information in support of encryption. * For this, we create a side-file, which is named like the actual log * file, but with the suffix ".encinfo" appended. It contains the following * records: * IV:<hex> The initial vector used at block start. Also indicates start * start of block. * END:<int> The end offset of the block, as uint64_t in decimal notation. * This is used during encryption to know when the current * encryption block ends. * For the current implementation, there must always be an IV record * followed by an END record. Each records is LF-terminated. Record * types can simply be extended in the future by specifying new * types (like "IV") before the colon. * To identify a file as rsyslog encryption info file, it must start with * the line "FILETYPE:rsyslog-enrcyption-info" * There are some size constraints: the recordtype must be 31 bytes at * most and the actual value (between : and LF) must be 1023 bytes at most. * * This file is part of rsyslog. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * -or- * see COPYING.ASL20 in the source distribution * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #if HAVE_CONFIG_H #include "config.h" #endif #include <stdio.h> #include <sys/stat.h> #include <sys/uio.h> #include <sys/types.h> #include <unistd.h> #include <fcntl.h> #include <errno.h> #include <openssl/evp.h> #include <string.h> #include "rsyslog.h" #include "srUtils.h" #include "debug.h" #include "libossl.h" #include "libcry_common.h" #define READBUF_SIZE 4096 /* size of the read buffer */ static rsRetVal rsosslBlkBegin(osslfile gf); /* read a key from a key file * @param[out] key - key buffer, must be freed by caller * @param[out] keylen - length of buffer * @returns 0 if OK, something else otherwise (we do not use * iRet as this is also called from non-rsyslog w/o runtime) * on error, errno is set and can be queried * The key length is limited to 64KiB to prevent DoS. * Note well: key is a blob, not a C string (NUL may be present!) */ int osslGetKeyFromFile(const char* const fn, char** const key, unsigned* const keylen) { struct stat sb; int r = -1; const int fd = open(fn, O_RDONLY); if (fd < 0) goto done; if (fstat(fd, &sb) == -1) goto done; if (sb.st_size > 64 * 1024) { errno = EMSGSIZE; goto done; } if (sb.st_size == 0) { errno = EINVAL; goto done; } if ((*key = malloc(sb.st_size)) == NULL) goto done; if (read(fd, *key, sb.st_size) != sb.st_size) goto done; *keylen = sb.st_size; r = 0; done: if (fd >= 0) { close(fd); } return r; } static void addPadding(osslfile pF, uchar* buf, size_t* plen) { unsigned i; size_t nPad; nPad = (pF->blkLength - *plen % pF->blkLength) % pF->blkLength; DBGPRINTF("libgcry: addPadding %zd chars, blkLength %zd, mod %zd, pad %zd\n", *plen, pF->blkLength, *plen % pF->blkLength, nPad); for (i = 0; i < nPad; ++i) buf[(*plen) + i] = 0x00; (*plen) += nPad; } static void ATTR_NONNULL() removePadding(uchar* const buf, size_t* const plen) { const size_t len = *plen; size_t iSrc, iDst; iSrc = 0; /* skip to first NUL */ while (iSrc < len && buf[iSrc] == '\0') { ++iSrc; } iDst = iSrc; while (iSrc < len) { if (buf[iSrc] != 0x00) buf[iDst++] = buf[iSrc]; ++iSrc; } *plen = iDst; } static rsRetVal eiWriteRec(osslfile gf, const char* recHdr, size_t lenRecHdr, const char* buf, size_t lenBuf) { struct iovec iov[3]; ssize_t nwritten, towrite; DEFiRet; iov[0].iov_base = (void*)recHdr; iov[0].iov_len = lenRecHdr; iov[1].iov_base = (void*)buf; iov[1].iov_len = lenBuf; iov[2].iov_base = (void*)"\n"; iov[2].iov_len = 1; towrite = iov[0].iov_len + iov[1].iov_len + iov[2].iov_len; nwritten = writev(gf->fd, iov, sizeof(iov) / sizeof(struct iovec)); if (nwritten != towrite) { DBGPRINTF( "eiWrite%s: error writing file, towrite %d, " "nwritten %d\n", recHdr, (int)towrite, (int)nwritten); ABORT_FINALIZE(RS_RET_EI_WR_ERR); } DBGPRINTF("encryption info file %s: written %s, len %d\n", recHdr, gf->eiName, (int)nwritten); finalize_it: RETiRet; } static rsRetVal eiOpenRead(osslfile gf) { DEFiRet; gf->fd = open((char*)gf->eiName, O_RDONLY | O_NOCTTY | O_CLOEXEC); if (gf->fd == -1) { ABORT_FINALIZE(errno == ENOENT ? RS_RET_EI_NO_EXISTS : RS_RET_EI_OPN_ERR); } finalize_it: RETiRet; } static rsRetVal eiRead(osslfile gf) { ssize_t nRead; DEFiRet; if (gf->readBuf == NULL) { CHKmalloc(gf->readBuf = malloc(READBUF_SIZE)); } nRead = read(gf->fd, gf->readBuf, READBUF_SIZE); if (nRead <= 0) { ABORT_FINALIZE(RS_RET_ERR); } gf->readBufMaxIdx = (int16_t)nRead; gf->readBufIdx = 0; finalize_it: RETiRet; } /* returns EOF on any kind of error */ static int eiReadChar(osslfile gf) { int c; if (gf->readBufIdx >= gf->readBufMaxIdx) { if (eiRead(gf) != RS_RET_OK) { c = EOF; goto finalize_it; } } c = gf->readBuf[gf->readBufIdx++]; finalize_it: return c; } static rsRetVal eiCheckFiletype(osslfile gf) { char hdrBuf[128]; size_t toRead, didRead; sbool bNeedClose = 0; DEFiRet; if (gf->fd == -1) { CHKiRet(eiOpenRead(gf)); assert(gf->fd != -1); /* cannot happen after successful return */ bNeedClose = 1; } if (Debug) memset(hdrBuf, 0, sizeof(hdrBuf)); /* for dbgprintf below! */ toRead = sizeof("FILETYPE:") - 1 + sizeof(RSGCRY_FILETYPE_NAME) - 1 + 1; didRead = read(gf->fd, hdrBuf, toRead); if (bNeedClose) { close(gf->fd); gf->fd = -1; } DBGPRINTF("eiCheckFiletype read %zd bytes: '%s'\n", didRead, hdrBuf); if (didRead != toRead || strncmp(hdrBuf, "FILETYPE:" RSGCRY_FILETYPE_NAME "\n", toRead)) iRet = RS_RET_EI_INVLD_FILE; finalize_it: RETiRet; } /* rectype/value must be EIF_MAX_*_LEN+1 long! * returns 0 on success or something else on error/EOF */ static rsRetVal eiGetRecord(osslfile gf, char* rectype, char* value) { unsigned short i, j; int c; DEFiRet; c = eiReadChar(gf); if (c == EOF) { ABORT_FINALIZE(RS_RET_NO_DATA); } for (i = 0; i < EIF_MAX_RECTYPE_LEN; ++i) { if (c == ':' || c == EOF) break; rectype[i] = c; c = eiReadChar(gf); } if (c != ':') { ABORT_FINALIZE(RS_RET_ERR); } rectype[i] = '\0'; j = 0; for (++i; i < EIF_MAX_VALUE_LEN; ++i, ++j) { c = eiReadChar(gf); if (c == '\n' || c == EOF) break; value[j] = c; } if (c != '\n') { ABORT_FINALIZE(RS_RET_ERR); } value[j] = '\0'; finalize_it: RETiRet; } static rsRetVal eiGetIV(osslfile gf, uchar* iv, size_t leniv) { char rectype[EIF_MAX_RECTYPE_LEN + 1]; char value[EIF_MAX_VALUE_LEN + 1]; size_t valueLen; unsigned short i, j; unsigned char nibble; DEFiRet; CHKiRet(eiGetRecord(gf, rectype, value)); const char* const cmp_IV = "IV"; // work-around for static analyzer if (strcmp(rectype, cmp_IV)) { DBGPRINTF( "no IV record found when expected, record type " "seen is '%s'\n", rectype); ABORT_FINALIZE(RS_RET_ERR); } valueLen = strlen(value); if (valueLen / 2 != leniv) { DBGPRINTF("length of IV is %zd, expected %zd\n", valueLen / 2, leniv); ABORT_FINALIZE(RS_RET_ERR); } for (i = j = 0; i < valueLen; ++i) { if (value[i] >= '0' && value[i] <= '9') nibble = value[i] - '0'; else if (value[i] >= 'a' && value[i] <= 'f') nibble = value[i] - 'a' + 10; else { DBGPRINTF("invalid IV '%s'\n", value); ABORT_FINALIZE(RS_RET_ERR); } if (i % 2 == 0) iv[j] = nibble << 4; else iv[j++] |= nibble; } finalize_it: RETiRet; } static rsRetVal eiGetEND(osslfile gf, off64_t* offs) { char rectype[EIF_MAX_RECTYPE_LEN + 1]; char value[EIF_MAX_VALUE_LEN + 1]; DEFiRet; CHKiRet(eiGetRecord(gf, rectype, value)); const char* const const_END = "END"; // clang static analyzer work-around if (strcmp(rectype, const_END)) { DBGPRINTF( "no END record found when expected, record type " "seen is '%s'\n", rectype); ABORT_FINALIZE(RS_RET_ERR); } *offs = atoll(value); finalize_it: RETiRet; } static rsRetVal eiOpenAppend(osslfile gf) { rsRetVal localRet; DEFiRet; localRet = eiCheckFiletype(gf); if (localRet == RS_RET_OK) { gf->fd = open((char*)gf->eiName, O_WRONLY | O_APPEND | O_NOCTTY | O_CLOEXEC, 0600); if (gf->fd == -1) { ABORT_FINALIZE(RS_RET_EI_OPN_ERR); } } else if (localRet == RS_RET_EI_NO_EXISTS) { /* looks like we need to create a new file */ gf->fd = open((char*)gf->eiName, O_WRONLY | O_CREAT | O_NOCTTY | O_CLOEXEC, 0600); if (gf->fd == -1) { ABORT_FINALIZE(RS_RET_EI_OPN_ERR); } CHKiRet(eiWriteRec(gf, "FILETYPE:", 9, RSGCRY_FILETYPE_NAME, sizeof(RSGCRY_FILETYPE_NAME) - 1)); } else { gf->fd = -1; ABORT_FINALIZE(localRet); } DBGPRINTF("encryption info file %s: opened as #%d\n", gf->eiName, gf->fd); finalize_it: RETiRet; } static rsRetVal __attribute__((nonnull(2))) eiWriteIV(osslfile gf, const uchar* const iv) { static const char hexchars[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f'}; unsigned iSrc, iDst; char hex[4096]; DEFiRet; if (gf->blkLength > sizeof(hex) / 2) { DBGPRINTF( "eiWriteIV: crypto block len way too large, aborting " "write"); ABORT_FINALIZE(RS_RET_ERR); } for (iSrc = iDst = 0; iSrc < gf->blkLength; ++iSrc) { hex[iDst++] = hexchars[iv[iSrc] >> 4]; hex[iDst++] = hexchars[iv[iSrc] & 0x0f]; } iRet = eiWriteRec(gf, "IV:", 3, hex, gf->blkLength * 2); finalize_it: RETiRet; } /* we do not return an error state, as we MUST close the file, * no matter what happens. */ static void eiClose(osslfile gf, off64_t offsLogfile) { char offs[21]; size_t len; if (gf->fd == -1) return; if (gf->openMode == 'w') { /* 2^64 is 20 digits, so the snprintf buffer is large enough */ len = snprintf(offs, sizeof(offs), "%lld", (long long)offsLogfile); eiWriteRec(gf, "END:", 4, offs, len); } EVP_CIPHER_CTX_free(gf->chd); free(gf->readBuf); close(gf->fd); gf->fd = -1; DBGPRINTF("encryption info file %s: closed\n", gf->eiName); } /* this returns the number of bytes left inside the block or -1, if the block * size is unbounded. The function automatically handles end-of-block and begins * to read the next block in this case. */ rsRetVal osslfileGetBytesLeftInBlock(osslfile gf, ssize_t* left) { DEFiRet; if (gf->bytesToBlkEnd == 0) { DBGPRINTF("libossl: end of current crypto block\n"); EVP_CIPHER_CTX_free(gf->chd); CHKiRet(rsosslBlkBegin(gf)); } *left = gf->bytesToBlkEnd; finalize_it: RETiRet; } /* this is a special functon for use by the rsyslog disk queue subsystem. It * needs to have the capability to delete state when a queue file is rolled * over. This simply generates the file name and deletes it. It must take care * of "all" state files, which currently happens to be a single one. */ rsRetVal osslfileDeleteState(uchar* logfn) { char fn[MAXFNAME + 1]; DEFiRet; snprintf(fn, sizeof(fn), "%s%s", logfn, ENCINFO_SUFFIX); fn[MAXFNAME] = '\0'; /* be on save side */ DBGPRINTF("ossl crypto provider deletes state file '%s' on request\n", fn); unlink(fn); RETiRet; } static rsRetVal osslfileConstruct(osslctx ctx, osslfile* pgf, uchar* logfn) { char fn[MAXFNAME + 1]; osslfile gf; DEFiRet; CHKmalloc(gf = calloc(1, sizeof(struct osslfile_s))); CHKmalloc(gf->chd = EVP_CIPHER_CTX_new()); gf->ctx = ctx; gf->fd = -1; snprintf(fn, sizeof(fn), "%s%s", logfn, ENCINFO_SUFFIX); fn[MAXFNAME] = '\0'; /* be on save side */ gf->eiName = (uchar*)strdup(fn); *pgf = gf; finalize_it: RETiRet; } osslctx osslCtxNew(void) { osslctx ctx; ctx = calloc(1, sizeof(struct osslctx_s)); if (ctx != NULL) { ctx->cipher = EVP_aes_128_cbc(); ctx->key = NULL; ctx->keyLen = -1; } return ctx; } int osslfileDestruct(osslfile gf, off64_t offsLogfile) { int r = 0; if (gf == NULL) goto done; DBGPRINTF("libossl: close file %s\n", gf->eiName); eiClose(gf, offsLogfile); if (gf->bDeleteOnClose) { DBGPRINTF("unlink file '%s' due to bDeleteOnClose set\n", gf->eiName); unlink((char*)gf->eiName); } free(gf->eiName); free(gf); done: return r; } void rsosslCtxDel(osslctx ctx) { if (ctx != NULL) { free(ctx->key); free(ctx); } } /* returns 0 on succes, positive if key length does not match and key * of return value size is required. */ int rsosslSetKey(osslctx ctx, unsigned char* key, uint16_t keyLen) { uint16_t reqKeyLen; int r; reqKeyLen = EVP_CIPHER_get_key_length(ctx->cipher); if (keyLen != reqKeyLen) { r = reqKeyLen; goto done; } ctx->keyLen = keyLen; ctx->key = malloc(keyLen); memcpy(ctx->key, key, keyLen); r = 0; done: return r; } rsRetVal rsosslSetAlgoMode(osslctx ctx, uchar* algorithm) { EVP_CIPHER* cipher; DEFiRet; cipher = EVP_CIPHER_fetch(NULL, (char*)algorithm, NULL); if (cipher == NULL) { ABORT_FINALIZE(RS_RET_CRY_INVLD_ALGO); } ctx->cipher = cipher; finalize_it: RETiRet; } /* We use random numbers to initiate the IV. Rsyslog runtime will ensure * we get a sufficiently large number. */ #if defined(__clang__) #pragma GCC diagnostic ignored "-Wunknown-attributes" #endif static rsRetVal #if defined(__clang__) __attribute__((no_sanitize("shift"))) /* IV shift causes known overflow */ #endif seedIV(osslfile gf, uchar** iv) { long rndnum = 0; /* keep compiler happy -- this value is always overriden */ DEFiRet; CHKmalloc(*iv = calloc(1, gf->blkLength)); for (size_t i = 0; i < gf->blkLength; ++i) { const int shift = (i % 4) * 8; if (shift == 0) { /* need new random data? */ rndnum = randomNumber(); } (*iv)[i] = 0xff & ((rndnum & (255u << shift)) >> shift); } finalize_it: RETiRet; } static rsRetVal readIV(osslfile gf, uchar** iv) { rsRetVal localRet; DEFiRet; if (gf->fd == -1) { while (gf->fd == -1) { localRet = eiOpenRead(gf); if (localRet == RS_RET_EI_NO_EXISTS) { /* wait until it is created */ srSleep(0, 10000); } else { CHKiRet(localRet); } } CHKiRet(eiCheckFiletype(gf)); } *iv = malloc(gf->blkLength); /* do NOT zero-out! */ iRet = eiGetIV(gf, *iv, (size_t)gf->blkLength); finalize_it: RETiRet; } /* this tries to read the END record. HOWEVER, no such record may be * present, which is the case if we handle a currently-written to queue * file. On the other hand, the queue file may contain multiple blocks. So * what we do is try to see if there is a block end or not - and set the * status accordingly. Note that once we found no end-of-block, we will never * retry. This is because that case can never happen under current queue * implementations. -- gerhards, 2013-05-16 */ static rsRetVal readBlkEnd(osslfile gf) { off64_t blkEnd; DEFiRet; iRet = eiGetEND(gf, &blkEnd); if (iRet == RS_RET_OK) { gf->bytesToBlkEnd = (ssize_t)blkEnd; } else if (iRet == RS_RET_NO_DATA) { gf->bytesToBlkEnd = -1; } else { FINALIZE; } finalize_it: RETiRet; } /* module-init dummy for potential later use */ int rsosslInit(void) { return 0; } /* module-deinit dummy for potential later use */ void rsosslExit(void) { return; } /* Read the block begin metadata and set our state variables accordingly. * Can also be used to init the first block in write case. */ static rsRetVal rsosslBlkBegin(osslfile gf) { uchar* iv = NULL; DEFiRet; const char openMode = gf->openMode; // FIXME error handling if (openMode == 'r') { readIV(gf, &iv); readBlkEnd(gf); } else { CHKiRet(seedIV(gf, &iv)); } if (openMode == 'r') { if ((iRet = EVP_DecryptInit_ex(gf->chd, gf->ctx->cipher, NULL, gf->ctx->key, iv)) != 1) { DBGPRINTF("EVP_DecryptInit_ex failed: %d\n", iRet); ABORT_FINALIZE(RS_RET_ERR); } } else { if ((iRet = EVP_EncryptInit_ex(gf->chd, gf->ctx->cipher, NULL, gf->ctx->key, iv)) != 1) { DBGPRINTF("EVP_EncryptInit_ex failed: %d\n", iRet); ABORT_FINALIZE(RS_RET_ERR); } } if ((iRet = EVP_CIPHER_CTX_set_padding(gf->chd, 0)) != 1) { fprintf(stderr, "EVP_CIPHER_set_padding failed: %d\n", iRet); ABORT_FINALIZE(RS_RET_ERR); } if (openMode == 'w') { CHKiRet(eiOpenAppend(gf)); CHKiRet(eiWriteIV(gf, iv)); } finalize_it: free(iv); RETiRet; } rsRetVal rsosslInitCrypt(osslctx ctx, osslfile* pgf, uchar* fname, char openMode) { osslfile gf = NULL; DEFiRet; CHKiRet(osslfileConstruct(ctx, &gf, fname)); gf->openMode = openMode; gf->blkLength = EVP_CIPHER_get_block_size(ctx->cipher); CHKiRet(rsosslBlkBegin(gf)); *pgf = gf; finalize_it: if (iRet != RS_RET_OK && gf != NULL) osslfileDestruct(gf, -1); RETiRet; } rsRetVal rsosslDecrypt(osslfile pF, uchar* buf, size_t* len) { DEFiRet; int rc; if (pF->bytesToBlkEnd != -1) pF->bytesToBlkEnd -= *len; rc = EVP_DecryptUpdate(pF->chd, buf, (int*)len, buf, (int)*len); if (rc != 1) { DBGPRINTF("EVP_DecryptUpdate failed\n"); ABORT_FINALIZE(RS_RET_ERR); } removePadding(buf, len); dbgprintf("libossl: decrypted, bytesToBlkEnd %lld, buffer is now '%50.50s'\n", (long long)pF->bytesToBlkEnd, buf); finalize_it: RETiRet; } rsRetVal rsosslEncrypt(osslfile pF, uchar* buf, size_t* len) { DEFiRet; int tmplen; if (*len == 0) FINALIZE; addPadding(pF, buf, len); if (EVP_EncryptUpdate(pF->chd, buf, (int*)len, buf, (int)*len) != 1) { dbgprintf("EVP_EncryptUpdate failed\n"); ABORT_FINALIZE(RS_RET_CRYPROV_ERR); } if (EVP_EncryptFinal_ex(pF->chd, buf + *len, &tmplen) != 1) { dbgprintf("EVP_EncryptFinal_ex failed\n"); ABORT_FINALIZE(RS_RET_CRYPROV_ERR); } *len += tmplen; finalize_it: RETiRet; }