macros.in - master - githubmirror/rpm

macros.in
1 405 строк46 KB
Luca Boccassi
macros: default to systemd-sysusers binary
27 июл 2026, 15:17
27 июл 2026, 15:17ac07f01
# This is a global RPM configuration file. All changes made here will
# be lost when the rpm package is upgraded.
#
# See rpm-macros(7), rpm-macrofile(5) and rpm-config(5) rpmbuild-config(5)
# for more information.

#==============================================================================
# ---- A macro that expands to nothing.
#
%nil			%{!?nil}

#==============================================================================
# ---- filesystem macros.
#
%_usr			@prefix@
%_usrsrc		%{_usr}/src
%_var			@localstatedir@

#==============================================================================
# ---- Generally useful path macros.
#
%__7zip			@__7ZIP@
%__awk			@__AWK@
%__bzip2		@__BZIP2@
%__car			@__CAR@
%__cat			@__CAT@
%__chmod		@__CHMOD@
%__chown		@__CHOWN@
%__cp			@__CP@
%__file			@__FILE@
%__grep			@__GREP@
%__gzip			@__GZIP@
%__id			@__ID@
%__id_u			%{__id} -u
%__install		@__INSTALL@
%__ln			@__LN@
%__ln_s			%{__ln} -s
%__lrzip		@__LRZIP@
%__lzip			@__LZIP@
%__xz			@__XZ@
%__make			@__MAKE@
%__mkdir		@__MKDIR@
%__mkdir_p		%{__mkdir} -p
%__mv			@__MV@
%__patch		@__PATCH@
%__rm			@__RM@
%__sed			@__SED@
%__tar			@__TAR@
%__unzip		@__UNZIP@
%__zstd			@__ZSTD@
%__gem			@__GEM@
%__git			@__GIT@
%__hg			@__HG@
%__bzr			@__BZR@
%__quilt		@__QUILT@

#==============================================================================
# ---- Build system path macros.
#
%__ar			@__AR@
%__as			@__AS@
%__cc			@__CC@
%__cpp			@__CPP@
%__cxx			@__CXX@
%__ld			@__LD@
%__objdump		@__OBJDUMP@
%__strip		@__STRIP@
%__rpmuncompress	@bindir_full@/rpmuncompress

%__find_debuginfo	@__FIND_DEBUGINFO@

#==============================================================================
# Conditional build stuff.

# Check if symbol is defined.
# Example usage: %if %{defined with_foo} && %{undefined with_bar} ...
%defined()	%{expand:%%{?%{1}:1}%%{!?%{1}:0}}
%undefined()	%{expand:%%{?%{1}:0}%%{!?%{1}:1}}

# Handle conditional builds.
# (see 'conditionalbuilds' in the manual)
#
# Internally, the `--with foo` option defines the macro `_with_foo` and the
# `--without foo` option defines the macro `_without_foo`.
# Based on those and a default (used when neither is given), bcond macros
# define the macro `with_foo`, which should later be checked:

%bcond_override_default()   %{expand:%%global bcond_override_default_%{1} %{2}}
%__bcond_override_default()	%{expand:%%["%%{?bcond_override_default_%{1}}"||"%%{2}"]}
%bcond()	%[ %{__bcond_override_default %{1} %{2}}\
    ? "%{expand:%%{!?_without_%{1}:%%global with_%{1} 1}}"\
    : "%{expand:%%{?_with_%{1}:%%global with_%{1} 1}}"\
]
%bcond_with()		%bcond %{1} 0
%bcond_without()	%bcond %{1} 1

# Shorthands for %{defined with_...}:
%with()		%{expand:%%{?with_%{1}:1}%%{!?with_%{1}:0}}
%without()	%{expand:%%{?with_%{1}:0}%%{!?with_%{1}:1}}

#
#==============================================================================
# ---- Required rpmrc macros.
#	Macros that used to be initialized as a side effect of rpmrc parsing.
#	These are the default values that can be overridden by other
#	(e.g. per-platform, per-system, per-packager, per-package) macros.
#
#	The directory where rpm's configuration and scripts live
%_rpmconfigdir		%{getconfdir}
#       The directory where rpm's macro files live
%_rpmmacrodir		%{_rpmconfigdir}/macros.d
#	The directory where rpm's addon lua libraries live
%_rpmluadir		%{_rpmconfigdir}/lua

#	The directory where sources/patches will be unpacked and built.
%_builddir		%{_topdir}/BUILD

#	The interpreter used for build scriptlets.
%_buildshell		/bin/sh

#	The location of the rpm database file(s).
%_dbpath		%{_var}/lib/rpm

#	The location of the rpm database file(s) after "rpm --rebuilddb".
%_dbpath_rebuild	%{_dbpath}

# 	Keyring type to use
# 	rpmdb		gpg-pubkey "packages" in rpmdb (default)
# 	fs		gpg-pubkey files at %_keyringpath
%_keyring		rpmdb

%_keyringpath		%{_dbpath}/pubkeys/

%_keyring_lockpath	%{_dbpath}/.keyring.lock

# Location of passwd(5) and group(5), as : separated list
# Uncomment to disable NSS lookups
#%_passwd_path		/etc/passwd
#%_group_path		/etc/group

# location of sysusers.d(5) directory
%_sysusersdir		@sysusersdir@

# sysusers helper binary (or a replacement script), comment out to disable
%__systemd_sysusers	@__SYSTEMD_SYSUSERS@
#%__systemd_sysusers	%{_rpmconfigdir}/sysusers.sh

#
#	Path to script that creates debug symbols in a /usr/lib/debug
#	shadow tree.
#
#	A spec file can %%define _find_debuginfo_opts to pass options to
#	the script.  See the script for details.
#
#	Other macro files can %%define _find_debuginfo_vendor_opts to pass
#       options to the script.
#
%__debug_install_post   \
    %{__find_debuginfo} \\\
    %{?_smp_build_ncpus:-j%{_smp_build_ncpus}} \\\
    %{?_missing_build_ids_terminate_build:--strict-build-id} \\\
    %{?_no_recompute_build_ids:-n} \\\
    %{?_include_minidebuginfo:-m} \\\
    %{?_include_gdb_index:-i} \\\
    %{?_unique_build_ids:--build-id-seed "%{VERSION}-%{RELEASE}"} \\\
    %{?_unique_debug_names:--unique-debug-suffix "-%{VERSION}-%{RELEASE}.%{_arch}"} \\\
    %{?_unique_debug_srcs:--unique-debug-src-base "%{name}-%{VERSION}-%{RELEASE}.%{_arch}"} \\\
    %{?_find_debuginfo_dwz_opts} \\\
    %{?_find_debuginfo_opts} \\\
    %{?_find_debuginfo_vendor_opts} \\\
    %{?_debugsource_packages:-S debugsourcefiles.list} \\\
    "%{builddir}/%{?buildsubdir}"\
%{nil}

#	Template for debug information sub-package.
%_debuginfo_template \
%package debuginfo\
Summary: Debug information for package %{name}\
Group: Development/Debug\
AutoReq: 0\
AutoProv: 1\
%description debuginfo\
This package provides debug information for package %{name}.\
Debug information is useful when developing applications that use this\
package or when debugging this package.\
%files debuginfo -f debugfiles.list\
%{nil}

%_debugsource_template \
%package debugsource\
Summary: Debug sources for package %{name}\
Group: Development/Debug\
AutoReqProv: 0\
%description debugsource\
This package provides debug sources for package %{name}.\
Debug sources are useful when developing applications that use this\
package or when debugging this package.\
%files debugsource -f debugsourcefiles.list\
%{nil}

# The duplicate __debug_package definition is needed to ensure matching
# state when %install is skipped due to short-circuit, IFF buildsubdir
# is defined (indicating use of automatic debuginfo generation)
%debug_package \
%ifnarch noarch\
%global __debug_package 1\
%{?buildsubdir:%%global __debug_package 1}\
%_debuginfo_template\
%{?_debugsource_packages:%_debugsource_template}\
%endif\
%{nil}

%_langpack_template() \
%package langpack-%{1}\
Summary:       %{2} language data for %{name}\
BuildArch:     noarch\
Requires:      %{name} = %{version}-%{release}\
Supplements:   (%{name} = %{version}-%{release} and langpacks-%{1})\
%description langpack-%{1}\
%{2} language data for %{name}.\
%files langpack-%{1}\
%{nil}

%_defaultdocdir		%{_datadir}/doc
%_defaultlicensedir	%{_datadir}/licenses

# Following macros for filtering auto deps must not be used in spec files.
# Their purpose is to set up global filtering for all packages. If you need
# to set up specific filtering for your package use %__requires_exclude_from
# and %__provides_exclude_from instead.
%__global_requires_exclude_from		%{?_docdir:%{_docdir}}
%__global_provides_exclude_from		%{?_docdir:%{_docdir}}

#	Maximum age of preserved changelog entries in binary packages,
#	relative to newest existing entry. Unix timestamp format.
%_changelog_trimage	0

#	An alternative strategy for changelog trimming:
#	the Unix time of the latest kept changelog entry in binary packages
%_changelog_trimtime	0

#	If true, set the SOURCE_DATE_EPOCH environment variable
#	to the timestamp of the topmost changelog entry
%source_date_epoch_from_changelog 0

#	If true, make sure that buildtime in built rpms
#	is set to the value of SOURCE_DATE_EPOCH.
#	Is ignored when SOURCE_DATE_EPOCH is not set.
%use_source_date_epoch_as_buildtime 0

#	Defines file timestamp handling in built rpms. Possible values
#	are "clamp_to_buildtime" and "clamp_to_source_date_epoch", 
#	which makes sure the the file timestamps are not later than
#	the build time of the package or the value of
#	SOURCE_DATE_EPOCH, respectively.
#%build_mtime_policy

#	If enabled, dilute user() and group() requires into recommends
#%_use_weak_usergroup_deps 1

#	The directory where newly built binary packages will be written.
%_rpmdir		%{_topdir}/RPMS

#	A template used to generate the output binary package file name
#	(legacy).
%_rpmfilename		%{_build_name_fmt}

#	Which rpm format go generate (4 or 6)
%_rpmformat 6

#	The directory where sources/patches from a source package will be
#	installed. This is also where sources/patches are found when building.
%_sourcedir		%{_topdir}/SOURCES

#	The directory where the spec file from a source package will be
#	installed.
%_specdir		%{_topdir}/SPECS

#	The directory where newly built source packages will be written.
%_srcrpmdir		%{_topdir}/SRPMS

#	Directory where temporaray files can be created.
%_tmppath		%{_var}/tmp

#	Path to top of build area.
%_topdir		%{getenv:HOME}/rpmbuild

#==============================================================================
# ---- Optional rpmrc macros.
#	Macros that are initialized as a side effect of rpmrc and/or spec
#	file parsing.
#
#	The sub-directory (relative to %{builddir}) where sources are compiled.
#	This macro is set after processing %setup, either explicitly from the
#	value given to -n or the default name-version.
#
#%buildsubdir

#	Configurable distribution information, same as Distribution: tag in a
#	specfile.
#
#%distribution

#	Configurable distribution URL, same as DistURL: tag in a specfile.
#	The URL will be used to supply reliable information to tools like
#	rpmfind.
#
# Note: You should not configure with disturl (or build packages with
# the DistURL: tag) unless you are willing to supply content in a
# yet-to-be-determined format at the URL specified.
#
#%disturl

#	Configurable distribution tag, same as DistTag: tag in a specfile.
#	The tag will be used to supply reliable information to tools like
#	rpmfind.
#
#%disttag

#	Configurable bug URL, same as BugURL: tag in a specfile.
#	The URL will be used to supply reliable information to where
#	to file bugs.
#
#%bugurl

#	Boolean (i.e. 1 == "yes", 0 == "no") that controls whether files
#	marked as %doc should be installed.
#%_excludedocs

# OpenPGP implementation to use: "sq" for Sequoia and "gpg" for GnuPG
%_openpgp_sign gpg

#	The signer ID (fingerprint or keyid) to use for signing
#	Default to %_gpg_name for backwards compatibility
%_openpgp_sign_id %{?_gpg_name}

#	Optional alternative path for GnuPG configuration, same as setting
#	GNUPGHOME environment variable or passing --homedir to gpg.
#
#%_gpg_path /some/path

#	Optional alternative path for Sequoia-sq configuration, same as
#	passing --home to sq.
#
#%_sq_path /some/path

#	The port and machine name of an HTTP proxy host (used for FTP/HTTP).
#
#%_httpport
#%_httpproxy

#	The PATH put into the environment before running %pre/%post et al.
#
%_install_script_path	/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin

#	A colon separated list of desired locales to be installed;
#	"all" means install all locale specific files.
#	
%_install_langs	all

#	Set ModularityLabel: for packages being build
#
#%modularitylabel

#	A colon separated list of paths where files should *not* be installed.
#	Usually, these are network file system mount points.
#
#%_netsharedpath

#	Configurable packager information, same as Packager: in a specfile.
#
#%packager

#	Compression type and level for source/binary package payloads.
#	See rpm-payloadflags(7).
#
#%_source_payload	w9.gzdio
%_binary_payload	%[ %_rpmformat >=6 ? "w19.zstdio" : "w9.gzdio" ]

#	Algorithm to use for generating file checksum digests on build.
#	If not specified or 0, MD5 is used.
#	WARNING: non-MD5 is backwards incompatible with rpm < 4.6!
#	The supported algorithms may depend on the underlying crypto
#	implementation but generally at least the following are supported:
#	1	MD5
#	2	SHA1
#	8	SHA256 (default)
#	9	SHA384
#	10	SHA512
#	12	SHA3-256
#	14	SHA3-512
#
%_source_filedigest_algorithm	8
%_binary_filedigest_algorithm	8

#	Configurable vendor information, same as Vendor: in a specfile.
#
#%vendor

#	Default fuzz level for %patch in spec file.
%_default_patch_fuzz	0

#	Default patch flags
#%_default_patch_flags	-s
%_default_patch_flags --no-backup-if-mismatch -f

#==============================================================================
# ---- Build configuration macros.
#
# Script gets packaged file list on input and buildroot as first parameter.
# Returns list of unpackaged files, i.e. files in $RPM_BUILD_ROOT not packaged.
#
# Note: Disable (by commenting out) for legacy compatibility.
%__check_files         %{_rpmconfigdir}/check-files %{buildroot}

#
# Should unpackaged files in a build root terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_unpackaged_files_terminate_build	1

# Should duplicate files in %files terminate a build?
%_duplicate_files_terminate_build	0

#
# Should missing %doc files in the build directory terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_missing_doc_files_terminate_build	1

#
# Should empty %files manifest file terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_empty_manifest_terminate_build	1

#
# Should binaries in noarch packages terminate a build?
%_binaries_in_noarch_packages_terminate_build	1

# Should invalid utf8 encoding in package metadata terminate a build?
%_invalid_encoding_terminates_build 1

# Should invalid version format in requires, provides, ... terminate a build?
%_wrong_version_format_terminate_build 1

#
# Should rpm try to download missing sources at build-time?
# Enabling this is dangerous as long as rpm has no means to validate
# the integrity of the download with a digest or signature.
%_disable_source_fetch 1

#
# Program to call for each successfully built and written binary package.
# The package name is passed to the program as a command-line argument.
#
#%_build_pkgcheck	%{_bindir}/rpmlint

#
# Program to call for the whole binary package set after build.
# The package set is passed to the program via command-line arguments.
#
#%_build_pkgcheck_set	%{_bindir}/rpmlint

#
# Program to call for successfully built and written SRPM.
# The package name is passed to the program as a command-line argument.
#
#%_build_pkgcheck_srpm	%{_bindir}/rpmlint

#
# Should the build of packages fail if package checker (if defined) returns
# non-zero exit status?
#
#%_nonzero_exit_pkgcheck_terminate_build	1

#
# Should an ELF file processed by find-debuginfo.sh having no build ID
# terminate a build?  This is left undefined to disable it and defined to
# enable.
#
#%_missing_build_ids_terminate_build	1

#
# Include minimal debug information in build binaries.
# Requires _enable_debug_packages.
#
#%_include_minidebuginfo	1

#
# Include a .gdb_index section in the .debug files.
# Requires _enable_debug_packages and gdb-add-index installed.
#
#%_include_gdb_index	1

#
# Defines how and if build_id links are generated for ELF files.
# The following settings are supported:
#
# - none
#   No build_id links are generated.
#
# - alldebug
#   build_id links are generated only when the __debug_package global is
#   defined. This will generate build_id links in the -debuginfo package
#   for both the main file as /usr/lib/debug/.build-id/xx/yyy and for
#   the .debug file as /usr/lib/debug/.build-id/xx/yyy.debug.
#   This is the old style build_id links as generated by the original
#   find-debuginfo.sh script.
#
# - separate
#   build_id links are generate for all binary packages. If this is a
#   main package (the __debug_package global isn't set) then the
#   build_id link is generated as /usr/lib/.build-id/xx/yyy. If this is
#   a -debuginfo package (the __debug_package global is set) then the
#   build_id link is generated as /usr/lib/debug/.build-id/xx/yyy.
#
# - compat
#   Same as for "separate" but if the __debug_package global is set then
#   the -debuginfo package will have a compatibility link for the main
#   ELF /usr/lib/debug/.build-id/xx/yyy -> /usr/lib/.build-id/xx/yyy
%_build_id_links compat

# Whether build-ids should be made unique between package version/releases
# when generating debuginfo packages. If set to 1 this will pass
# --build-id-seed "%{VERSION}-%{RELEASE}" to find-debuginfo.sh which will
# pass it onto debugedit --build-id-seed to be used to prime the build-id
# note hash.
%_unique_build_ids	1

# Do not recompute build-ids but keep whatever is in the ELF file already.
# Cannot be used together with _unique_build_ids (which forces recomputation).
# Defaults to undefined (unset).
#%_no_recompute_build_ids 1

# Whether .debug files should be made unique between package version,
# release and architecture. If set to 1 this will pass
# --unique-debug-suffix "-%{VERSION}-%{RELEASE}.%{_arch} find-debuginfo.sh
# to create debuginfo files which end in -<ver>-<rel>.<arch>.debug
# Requires _unique_build_ids.
%_unique_debug_names	1

# Whether the /usr/debug/src/<package> directories should be unique between
# package version, release and architecture. If set to 1 this will pass
# --unique-debug-src-base "%{name}-%{VERSION}-%{RELEASE}.%{_arch}" to
# find-debuginfo.sh to name the directory under /usr/debug/src as
# <name>-<ver>-<rel>.<arch>.
%_unique_debug_srcs	1

# Whether rpm should put debug source files into its own subpackage
#%_debugsource_packages	1

# Whether rpm should create extra debuginfo packages for each subpackage
#%_debuginfo_subpackages 1

#
# Use internal dependency generator rather than external helpers?
%_use_internal_dependency_generator	1

# Directories whose contents should be considered as documentation.
%__docdir_path %{_datadir}/doc:%{_datadir}/man:%{_datadir}/info:%{_datadir}/gtk-doc/html:%{_datadir}/gnome/help:%{?_docdir}:%{?_mandir}:%{?_infodir}:%{?_javadocdir}:/usr/doc:/usr/man:/usr/info:/usr/X11R6/man

#
# Path to scripts to autogenerate package dependencies,
#
# Note: Used iff _use_internal_dependency_generator is zero.
#%__find_provides	%{_rpmconfigdir}/rpmdeps --provides
#%__find_requires	%{_rpmconfigdir}/rpmdeps --requires
%__find_provides	%{_rpmconfigdir}/find-provides
%__find_requires	%{_rpmconfigdir}/find-requires
#%__find_conflicts	???
#%__find_obsoletes	???

# 
# Path to file attribute classifications for automatic dependency 
# extraction, used when _use_internal_dependency_generator
# is used (on by default). Files can have any number of attributes
# attached to them, and dependencies are separately extracted for
# each attribute.
# 
# To define a new file attribute called "myattr", add a file named
# "myattr" to this directory, defining the requires and/or provides
# finder script(s) + magic and/or path pattern regex(es).
# provides finder and 
# %__myattr_requires	path + args to requires finder script for <myattr>
# %__myattr_provides	path + args to provides finder script for <myattr>
# %__myattr_magic	libmagic classification match regex
# %__myattr_path	path based classification match regex
# %__myattr_flags	flags to control behavior (just "exeonly" for now)
# %__myattr_exclude_magic	exclude by magic regex
# %__myattr_exclude_path	exclude by path regex
#
%_fileattrsdir		%{_rpmconfigdir}/fileattrs

# This macro defines how much space (in bytes) in package should be
# reserved for gpg signatures during building of a package. If this space is
# big enough for gpg signatures to fit into it then signing of the packages is
# very quick because it is not necessary to rewrite the whole package to make
# some space for gpg signatures.
%__gpg_reserved_space 4096

#==============================================================================
# ---- Database configuration macros.
#
# Select backend database. The following values are supported:
# bdb_ro Berkeley DB (read-only)
# ndb new data base format
# sqlite Sqlite database
# dummy dummy backend (no actual functionality)
#
%_db_backend	      @DB_BACKEND@

#==============================================================================
# ---- OpenPGP signature macros.
#	Macro(s) to hold the arguments passed to the cmd implementing package
#	signing. Input path passed as the first argument, output as second.
#	Expansion result is parsed by popt, so be sure to use
#	%{shescape} where needed.
#
%__gpg			@__GPG@
%__gpg_sign_cmd()	%{shescape:%{__gpg}} \
	--no-verbose --no-armor --no-secmem-warning \
	%{?_gpg_path:--homedir %{shescape:%{_gpg_path}}} \
	%{?_gpg_digest_algo:--digest-algo=%{_gpg_digest_algo}} \
	%{?_gpg_sign_cmd_extra_args} \
	%{?_openpgp_sign_id:-u %{shescape:%{_openpgp_sign_id}}} \
	-sbo %{shescape:%{2}} -- %{shescape:%{1}}

%__sq @__SQ@
%__sq_sign_cmd()	%{shescape:%{__sq}} \
	sign \
	%{?_sq_path:--home %{shescape:%{_sq_path}}} \
        %{?_openpgp_sign_id:--signer %{_openpgp_sign_id}} \
	%{?_sq_sign_cmd_extra_args} \
        --binary --signature-file %{shescape:%{2}} -- %{shescape:%{1}}

%__openpgp_sign_cmd %{expand:%{__%{_openpgp_sign}_sign_cmd}}

#==============================================================================
# ---- Transaction macros.
#	Macro(s) used to parameterize transactions.
#
#	The output binary package file name template used when building
#	binary packages, as described by rpm-queryformat(7).
#
%_build_name_fmt<l>	%{ARCH}/%{NAME}-%{VERSION}-%{RELEASE}.%{ARCH}.rpm

#	Verify digest/signature flags for various rpm modes:
#	0x30300 (RPMVSF_MASK_NODIGESTS)    --nohdrchk      if set, don't check digest(s)
#	0xc0c00 (RPMVSF_MASK_NOSIGNATURES) --nosignature   if set, don't check signature(s)
#	0xf0000 (RPMVSF_MASK_NOPAYLOAD)    --nolegacy      if set, check header+payload (if possible)
#	0x00f00 (RPMVSF_MASK_NOHEADER)     --nohdrchk      if set, don't check rpmdb headers
#
#	For example, the value 0xf0c00 (=0xf0000+0xc0c00) disables legacy
#	digest/signature checking, disables signature checking, but attempts
#	digest checking, also when retrieving headers from the database.
#
#	You also can do:
#	 >>> hex(rpm.RPMVSF_MASK_NOSIGNATURES)
#	 '0xc0c00'
#	or:
#	 >>> hex(rpm.RPMVSF_MASK_NOSIGNATURES|rpm.RPMVSF_MASK_NOPAYLOAD)
#	 '0xf0c00'
#	at the python prompt for example, after "import rpm".
#
#	The checking overhead is ~11ms per header for digests/signatures;
#	each header from the database is checked only when first encountered
#	for each database open.
#
#	Note: the %_vsflags_erase applies to --upgrade/--freshen modes as
#	well as --erase.
#
%__vsflags		0xf0000
%_vsflags_build		%{__vsflags}
%_vsflags_erase		%{__vsflags}
%_vsflags_install	%{__vsflags}
%_vsflags_query		%{__vsflags}
%_vsflags_rebuilddb	0xc0c00
%_vsflags_verify	%{__vsflags}

# Enforced package verification level
# all		require valid digest(s) and signature(s)
# signature	require valid signature(s)
# digest	require valid digest(s)
# none		traditional rpm behavior, nothing required
%_pkgverify_level all

# Disabler flags for package verification (similar to vsflags)
# Set to 0x0 for full compatibility with v4 packages.
%_pkgverify_flags 0x20100

# Which algorithms to calculate package digests on during verification.
%_pkgverify_digests 8:10

# Minimize writes during transactions (at the cost of more reads) to
# conserve eg SSD disks (EXPERIMENTAL).
# 1			enable
# 0 			disable
# -1 (or undefined)	autodetect on platforms where supported, otherwise
# 			default to disabled
#%_minimize_writes      -1

# Flush file IO during transactions (at a severe cost in performance
# for rotational disks).
# 1			enable
# <= 0 (or undefined)	disable
#%_flush_io		0

# Set to 1 to have IMA signatures written also on %config files.
# Note that %config files may be changed and therefore end up with
# a wrong or missing signature.
#%_ima_sign_config_files	0

# Set to 1 to have fsverity signatures written for %config files.
#%_fsverity_sign_config_files	0

#
# Default output format for query operations, as described by
# rpm-queryformat(7).
%_query_all_fmt<l>		%{nvr}%{archsuffix}

#
# Default for coloring output
# valid values are always never and auto
%_color_output	never

#
# Default path to the file used for transaction fcntl lock.
%_rpmlock_path	%{_dbpath}/.rpm.lock

#
# ISA dependency marker, none for noarch and name-bitness for others
%_isa			%{?__isa:(%{__isa})}%{!?__isa:%{nil}}

#
# Define per-arch and per-os defaults. Normally overridden by per-target macros.
%__arch_install_post	%{nil}
%__os_install_post	%{___build_post}

# Macro to fix broken permissions in sources
%_fixperms      %{__chmod} -Rf a+rX,u+w,g-w,o-w

%__smp_use_ncpus() %([ -z "$RPM_BUILD_NCPUS" ] \\\
	&& RPM_BUILD_NCPUS="%{getncpus %{?1}}"; \\\
        ncpus_max=%{?_smp_ncpus_max}; \\\
        if [ -n "$ncpus_max" ] && [ "$ncpus_max" -gt 0 ] && [ "$RPM_BUILD_NCPUS" -gt "$ncpus_max" ]; then RPM_BUILD_NCPUS="$ncpus_max"; fi; \\\
        echo "$RPM_BUILD_NCPUS";)

# Maximum number of CPU's to use when building, 0 for unlimited.
#%_smp_ncpus_max 0

%_smp_build_ncpus %{__smp_use_ncpus:proc}

%_smp_mflags -j${RPM_BUILD_NCPUS}

# Maximum number of threads to use when building, 0 for unlimited
#%_smp_nthreads_max 0

%_smp_build_nthreads %{__smp_use_ncpus:thread}

# Assumed task size of processes and threads in megabytes.
# Used to limit the amount of parallelism based on available memory.
%_smp_tasksize_proc 512
%_smp_tasksize_thread %{_smp_tasksize_proc}

#==============================================================================
# ---- Scriptlet template templates.
#	Global defaults used for building scriptlet templates.
#

%___build_shell		%{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh}
%___build_args		-e
%___build_cmd		%{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args}
%___build_pre_env \
  RPM_SOURCE_DIR=\"%{_sourcedir}\"\
  RPM_BUILD_DIR=\"%{builddir}\"\
  RPM_OPT_FLAGS=\"%{optflags}\"\
  RPM_LD_FLAGS=\"%{?build_ldflags}\"\
  RPM_ARCH=\"%{_arch}\"\
  RPM_OS=\"%{_os}\"\
  RPM_BUILD_NCPUS=\"%{_smp_build_ncpus}\"\
  RPM_SPECPARTS_DIR=\"%{specpartsdir}\"\
  export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS RPM_BUILD_NCPUS RPM_SPECPARTS_DIR RPM_LD_FLAGS\
  RPM_DOC_DIR=\"%{_docdir}\"\
  export RPM_DOC_DIR\
  RPM_PACKAGE_NAME=\"%{NAME}\"\
  RPM_PACKAGE_VERSION=\"%{VERSION}\"\
  RPM_PACKAGE_RELEASE=\"%{RELEASE}\"\
  export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\
  LANG=@C_LOCALE@\
  export LANG\
  unset CDPATH DISPLAY ||:\
  unset DEBUGINFOD_URLS ||:\
  unset RPM_CONFIG_DIR ||:\
  RPM_BUILD_ROOT=\"%{buildroot}\"\
  export RPM_BUILD_ROOT\
  %{?_javaclasspath:CLASSPATH=\"%{_javaclasspath}\"\
  export CLASSPATH}\
  PKG_CONFIG_PATH=\"${PKG_CONFIG_PATH}:%{_libdir}/pkgconfig:%{_datadir}/pkgconfig\"\
  export PKG_CONFIG_PATH

%___build_pre	\
  . %{builddir}/rpmbuild.env\
  %[%{verbose}?"set -x":""]\
  umask 022\
  cd \"%{builddir}\"\


#%___build_body		%{nil}
%___build_post	\
  RPM_EC=$?\
  for pid in $(jobs -p); do kill -9 ${pid} || continue; done\
  exit ${RPM_EC}\
%{nil}

%___build_template	#!%{___build_shell}\
%{___build_pre}\
%{nil}

#%{___build_body}\
#%{___build_post}\
#%{nil}

#==============================================================================
# ---- Scriptlet templates.
#	Macro(s) that expand to a command and script that is executed.
#
%__spec_builddir_shell	%{___build_shell}
%__spec_builddir_args	%{___build_args}
%__spec_builddir_cmd	%{___build_cmd}
%__spec_builddir_pre	%{nil}
%__spec_builddir_body   %{nil}
%__spec_builddir_post	%{nil}
%__spec_builddir_template %{nil}

%__spec_prep_shell	%{___build_shell}
%__spec_prep_args	%{___build_args}
%__spec_prep_cmd	%{___build_cmd}
%__spec_prep_pre	%{___build_pre}
%__spec_prep_body	%{___build_body}
%__spec_prep_post	%{___build_post}
%__spec_prep_template	#!%{__spec_prep_shell}\
%{__spec_prep_pre}\
%{nil}

#%{__spec_prep_body}\
#%{__spec_prep_post}\
#%{nil}

%__spec_buildrequires_shell	%{___build_shell}
%__spec_buildrequires_args	%{___build_args}
%__spec_buildrequires_cmd	%{___build_cmd}
%__spec_buildrequires_pre	%{___build_pre}
%__spec_buildrequires_body	%{___build_body}
%__spec_buildrequires_post	%{___build_post}
%__spec_buildrequires_template	#!%{__spec_buildrequires_shell}\
%{__spec_buildrequires_pre}\
%{nil}

#%{__spec_buildrequires_body}\
#%{__spec_buildrequires_post}\
#%{nil}

%__spec_conf_shell	%{___build_shell}
%__spec_conf_args	%{___build_args}
%__spec_conf_cmd	%{___build_cmd}
%__spec_conf_pre	%{___build_pre}
%__spec_conf_body	%{___build_body}
%__spec_conf_post	%{___build_post}
%__spec_conf_template	#!%{__spec_build_shell}\
%{__spec_conf_pre}\
%{nil}

%__spec_build_shell	%{___build_shell}
%__spec_build_args	%{___build_args}
%__spec_build_cmd	%{___build_cmd}
%__spec_build_pre	%{___build_pre}
%__spec_build_body	%{___build_body}
%__spec_build_post	%{___build_post}
%__spec_build_template	#!%{__spec_build_shell}\
%{__spec_build_pre}\
%{nil}

#%{__spec_build_body}\
#%{__spec_build_post}\
#%{nil}

%__spec_install_shell	%{___build_shell}
%__spec_install_args	%{___build_args}
%__spec_install_cmd	%{___build_cmd}
%__spec_install_pre	%{___build_pre}
%__spec_install_body	%{___build_body}
%__spec_install_post\
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{nil}
%__spec_install_template	#!%{__spec_install_shell}\
%{__spec_install_pre}\
%{nil}

#%{__spec_install_body}\
#%{__spec_install_post}\
#%{nil}

%__spec_check_shell	%{___build_shell}
%__spec_check_args	%{___build_args}
%__spec_check_cmd	%{___build_cmd}
%__spec_check_pre	%{___build_pre}
%__spec_check_body	%{___build_body}
%__spec_check_post	%{___build_post}
%__spec_check_template	#!%{__spec_check_shell}\
%{__spec_check_pre}\
%{nil}

#%{__spec_check_body}\
#%{__spec_check_post}\
#%{nil}

#%__spec_autodep_shell	%{___build_shell}
#%__spec_autodep_args	%{___build_args}
#%__spec_autodep_cmd	%{___build_cmd}
#%__spec_autodep_pre	%{___build_pre}
#%__spec_autodep_body	%{___build_body}
#%__spec_autodep_post	%{___build_post}
#%__spec_autodep_template	#!%{__spec_autodep_shell}\
#%{__spec_autodep_pre}\
#%{nil}

#%{__spec_autodep_body}\
#%{__spec_autodep_post}\
#%{nil}

%__spec_clean_shell	%{___build_shell}
%__spec_clean_args	%{___build_args}
%__spec_clean_cmd	%{___build_cmd}
%__spec_clean_pre	%{___build_pre}
%__spec_clean_body	%{___build_body}
%__spec_clean_post	%{___build_post}
%__spec_clean_template	#!%{__spec_clean_shell}\
%{__spec_clean_pre}\
%{nil}

#%{__spec_clean_body}\
#%{__spec_clean_post}\
#%{nil}

%__spec_rmbuild_shell	%{___build_shell}
%__spec_rmbuild_args	%{___build_args}
%__spec_rmbuild_cmd	%{___build_cmd}
%__spec_rmbuild_pre	%{___build_pre}
%__spec_rmbuild_body	%{___build_body}
%__spec_rmbuild_post	%{___build_post}
%__spec_rmbuild_template	#!%{__spec_rmbuild_shell}\
%{__spec_rmbuild_pre}\
%{nil}

#%{__spec_rmbuild_body}\
#%{__spec_rmbuild_post}\
#%{nil}

# XXX We don't expand pre/post install scriptlets (yet).
#%__spec_pre_pre		%{nil}
#%__spec_pre_post		%{nil}
#%__spec_post_pre		%{nil}
#%__spec_post_post		%{nil}
#%__spec_preun_pre		%{nil}
#%__spec_preun_post		%{nil}
#%__spec_postun_pre		%{nil}
#%__spec_postun_post		%{nil}
#%__spec_triggerpostun_pre	%{nil}
#%__spec_triggerpostun_post	%{nil}
#%__spec_triggerun_pre		%{nil}
#%__spec_triggerun_post		%{nil}
#%__spec_triggerin_pre		%{nil}
#%__spec_triggerin_post		%{nil}

#==============================================================================
# ---- configure macros.
#	Macro(s) slavishly copied from autoconf's config.status.
#
%_prefix		@prefix@
%_exec_prefix		%{_prefix}
%_bindir		%{_exec_prefix}/bin
%_sbindir		%{_exec_prefix}/sbin
%_libexecdir		%{_exec_prefix}/libexec
%_datadir		%{_prefix}/share
%_sysconfdir		/etc
%_sharedstatedir	%{_var}/lib
%_localstatedir		%{_prefix}/var
%_lib			lib
%_libdir		%{_exec_prefix}/%{_lib}
%_includedir		%{_prefix}/include
%_infodir		%{_datadir}/info
%_mandir		%{_datadir}/man
%_iconsdir		%{_datadir}/icons

#==============================================================================
# ---- config.guess platform macros.
#	Macro(s) similar to the tokens used by configure.
#
%_build			%{_host}
%_build_alias		%{_host_alias}
%_build_cpu		%{_host_cpu}
%_build_vendor		%{_host_vendor}
%_build_os		%{_host_os}
%_host			@host@
%_host_alias		@host_alias@%{nil}
%_host_cpu		@host_cpu@
%_host_vendor		@host_vendor@
%_host_os		@host_os@
%_target		%{_host}
%_target_alias		%{_host_alias}
%_target_cpu		%{_host_cpu}
%_target_vendor		%{_host_vendor}
%_target_os		%{_host_os}

#==============================================================================
# ---- compiler flags.

# C compiler flags.  This is traditionally called CFLAGS in makefiles.
# Historically also available as %%{optflags}, and %%build sets the
# environment variable RPM_OPT_FLAGS to this value.
%build_cflags %{optflags}

# C++ compiler flags.  This is traditionally called CXXFLAGS in makefiles.
%build_cxxflags %{optflags}

# Fortran compiler flags.  Makefiles use both FFLAGS and FCFLAGS as
# the corresponding variable names.
%build_fflags %{optflags} %{?_fmoddir:-I%{_fmoddir}}

# Link editor flags.  This is usually called LDFLAGS in makefiles.
#%build_ldflags -Wl,-z,relro

# Expands to shell code to seot the compiler/linker environment
# variables CFLAGS, CXXFLAGS, FFLAGS, FCFLAGS, LDFLAGS if they have
# not been set already.
%set_build_flags \
  CFLAGS="${CFLAGS:-%{?build_cflags}}" ; export CFLAGS ; \
  CXXFLAGS="${CXXFLAGS:-%{?build_cxxflags}}" ; export CXXFLAGS ; \
  FFLAGS="${FFLAGS:-%{?build_fflags}}" ; export FFLAGS ; \
  FCFLAGS="${FCFLAGS:-%{?build_fflags}}" ; export FCFLAGS ; \
  LDFLAGS="${LDFLAGS:-%{?build_ldflags}}" ; export LDFLAGS

#==============================================================================
# ---- specfile macros.
#	Macro(s) here can be used reliably for reproducible builds.
#	(Note: Above is the goal, below are the macros under development)
#
# The configure macro runs autoconf configure script with platform specific
# directory structure (--prefix, --libdir etc) and compiler flags
# such as CFLAGS.
#
%_configure ./configure
%configure \
  %{set_build_flags}; \
  %{_configure} --host=%{_host} --build=%{_build} \\\
	--program-prefix=%{?_program_prefix} \\\
	--disable-dependency-tracking \\\
	--prefix=%{_prefix} \\\
	--exec-prefix=%{_exec_prefix} \\\
	--bindir=%{_bindir} \\\
	--sbindir=%{_sbindir} \\\
	--sysconfdir=%{_sysconfdir} \\\
	--datadir=%{_datadir} \\\
	--includedir=%{_includedir} \\\
	--libdir=%{_libdir} \\\
	--libexecdir=%{_libexecdir} \\\
	--localstatedir=%{_localstatedir} \\\
	--sharedstatedir=%{_sharedstatedir} \\\
	--mandir=%{_mandir} \\\
	--infodir=%{_infodir}

#------------------------------------------------------------------------------
# Tested features of make
# Output synchronization for parallel make:
%_make_output_sync %(! %{__make} --version -O >/dev/null 2>&1 || echo -O)

#------------------------------------------------------------------------------
# Verbosity options passed to make
%_make_verbose V=1 VERBOSE=1

#------------------------------------------------------------------------------
# The "make" analogue, hiding the _smp_mflags magic from specs
%make_build %{__make} %{_make_output_sync} %{?_smp_mflags} %{_make_verbose}

#------------------------------------------------------------------------------
# The make install analogue of %configure for modern autotools:
%make_install %{__make} install DESTDIR=%{?buildroot} INSTALL="%{__install} -p"

#------------------------------------------------------------------------------
# Former make install analogue, kept for compatibility and for old/broken
#  packages that don't support DESTDIR properly.
%makeinstall \
  echo "warning: %%makeinstall is deprecated, try %%make_install instead" 1>&2\
  %{__make} \\\
	prefix=%{?buildroot:%{buildroot}}%{_prefix} \\\
	exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \\\
	bindir=%{?buildroot:%{buildroot}}%{_bindir} \\\
	sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \\\
	sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \\\
	datadir=%{?buildroot:%{buildroot}}%{_datadir} \\\
	includedir=%{?buildroot:%{buildroot}}%{_includedir} \\\
	libdir=%{?buildroot:%{buildroot}}%{_libdir} \\\
	libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \\\
	localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \\\
	sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \\\
	mandir=%{?buildroot:%{buildroot}}%{_mandir} \\\
	infodir=%{?buildroot:%{buildroot}}%{_infodir} \\\
  install

#------------------------------------------------------------------------------
%patches %{lua: for i, p in ipairs(patches) do \
  print(macros.shescape({p}).." ") end}
%sources %{lua: for i, s in ipairs(sources) do \
  print(macros.shescape({s}).." ") end}

#------------------------------------------------------------------------------
# arch macro for all Intel i?86 compatible processors
#  (Note: This macro (and it's analogues) will probably be obsoleted when
#   rpm can use regular expressions against target platforms in macro
#   conditionals.
#
%ix86   i386 i486 i586 i686 pentium3 pentium4 athlon geode

#------------------------------------------------------------------------------
# arch macro for all supported x86_64 processors
%x86_64	x86_64 x86_64_v2 x86_64_v3 x86_64_v4 amd64 em64t

#------------------------------------------------------------------------------
# arch macro for all supported 32-bit ARM processors
%arm32	armv3l armv4b armv4l armv4tl armv5tl armv5tel armv5tejl armv6l armv6hl armv7l armv7hl armv7hnl armv8l armv8hl armv8hnl armv8hcnl

#------------------------------------------------------------------------------
# arch macro for all supported 32-bit ARM processors (legacy, use %%arm32 instead)
%arm	%{arm32}

#------------------------------------------------------------------------------
# arch macro for all supported 64-bit ARM processors
%arm64	aarch64

#------------------------------------------------------------------------------
# arch macro for 32-bit MIPS processors
%mips32	mips mipsel mipsr6 mipsr6el

#------------------------------------------------------------------------------
# arch macro for 64-bit MIPS processors
%mips64	mips64 mips64el mips64r6 mips64r6el

#------------------------------------------------------------------------------
# arch macro for big endian MIPS processors
%mipseb	mips mipsr6 mips64 mips64r6

#------------------------------------------------------------------------------
# arch macro for little endian MIPS processors
%mipsel	mipsel mipsr6el mips64el mips64r6el

#------------------------------------------------------------------------------
# arch macro for all supported MIPS processors
%mips	%{mips32} %{mips64}

#------------------------------------------------------------------------------
# arch macro for all supported Sparc processors
%sparc sparc sparcv8 sparcv9 sparcv9v sparc64 sparc64v

#------------------------------------------------------------------------------
# arch macro for all supported Alpha processors
%alpha	alpha alphaev56 alphaev6 alphaev67

#------------------------------------------------------------------------------
# arch macro for all supported PowerPC 64 processors
%power64	ppc64 ppc64p7 ppc64le

#------------------------------------------------------------------------------
# arch macro for all supported RISC-V processors
%riscv32	riscv32
%riscv64	riscv64
%riscv128	riscv128
%riscv		%{riscv32} %{riscv64} %{riscv128}


#------------------------------------------------------------------------------
# arch macro for 64-bit LOONGARCH processors
%loongarch64	loongarch64

#------------------------------------------------------------------------------
# arch macro for all E2K processors
#
%e2k		e2k e2kv4 e2kv5 e2kv6 e2k4c e2k8c e2k1cp e2k8c2 e2k12c e2k16c e2k2c3

#------------------------------------------------------------------------
# Use in %install to generate locale specific file lists. For example,
#
# %install
# ...
# %find_lang %{name}
# ...
# %files -f %{name}.lang
#
%find_lang	%{_rpmconfigdir}/find-lang.sh %{buildroot}

# Commands + opts to use for retrieving remote files
# Proxy opts can be set through --httpproxy/--httpport popt aliases,
# for any special local needs use %__urlhelper_localopts in system-wide
# or per-user macro configuration.
%__urlhelpercmd         @__CURL@
%__urlhelperopts        --silent --show-error --fail --globoff --location -o
%__urlhelper_proxyopts   %{?_httpproxy:--proxy %{_httpproxy}%{?_httpport::%{_httpport}}}%{!?_httpproxy:%{nil}}
%_urlhelper             %{__urlhelpercmd} %{?__urlhelper_localopts} %{?__urlhelper_proxyopts} %{__urlhelperopts}

# Transaction plugin directory macros
%__plugindir		@RPM_PLUGINDIR@

#------------------------------------------------------------------------------
# Macros for further automated spec %setup and patch application

# default to plain patch
%__scm patch
# meh, figure something saner
%__scm_username rpm-build
%__scm_usermail <rpm-build>
%__scm_author %{__scm_username} %{__scm_usermail}

# Plain patch (-m is unused)
%__scm_setup_patch(q) %{nil}
%__scm_apply_patch(qp:m:)\
%{__patch} %{-p:-p%{-p*}} %{-q:-s} --fuzz=%{_default_patch_fuzz} %{_default_patch_flags}

# Plain patch with backups for gendiff
%__scm_setup_gendiff(q) %{nil}
%__scm_apply_gendiff(qp:m:)\
%{__patch} %{-p:-p%{-p*}} %{-q:-s} --fuzz=%{_default_patch_fuzz} %{_default_patch_flags} -b --suffix ".%{2}"

# Mercurial (aka hg)
%__scm_setup_hg(q)\
%{__hg} init %{-q} .\
%{__hg} add %{-q} .\
%{__hg} commit %{-q} --user "%{__scm_author}" -m "%{NAME}-%{VERSION} base"

%__scm_apply_hg(qp:m:)\
%{__hg} import - %{-p:-p%{-p*}} %{-q} -m %{-m*} --user "%{__scm_author}"

%__scm_source_timestamp @${SOURCE_DATE_EPOCH:-${RPM_BUILD_TIME:?}}

# Git
%__scm_setup_git(q)\
%{__git} init %{-q}\
%{__git} config user.name "%{__scm_username}"\
%{__git} config user.email "%{__scm_usermail}"\
%{__git} config gc.auto 0\
%{__git} config maintenance.auto false\
%{__git} add --force .\
GIT_COMMITTER_DATE=%{__scm_source_timestamp} GIT_AUTHOR_DATE=%{__scm_source_timestamp}\\\
	%{__git} commit %{-q} --no-gpg-sign --allow-empty -a\\\
	--author "%{__scm_author}" -m "%{NAME}-%{VERSION} base"\
%{__git} checkout --track -b rpm-build

%__scm_apply_git(qp:m:)\
%{__git} apply --index --reject %{-p:-p%{-p*}} -\
GIT_COMMITTER_DATE=%{__scm_source_timestamp} GIT_AUTHOR_DATE=%{__scm_source_timestamp}\\\
	%{__git} commit %{-q} --no-gpg-sign -m %{-m*} --author "%{__scm_author}"

# Git, using "git am" (-m is unused)
%__scm_setup_git_am(q)\
%{expand:%__scm_setup_git %{-q}}

%__scm_apply_git_am(qp:m:)\
GIT_COMMITTER_DATE=%{__scm_source_timestamp}\\\
	%{__git} am --reject %{-q} %{-p:-p%{-p*}}

# Quilt
%__scm_setup_quilt(q) %{nil}
%__scm_apply_quilt(qp:m:)\
%{__quilt} import %{-p:-p%{-p*}} %{1} && %{__quilt} push %{-q}

# Bzr
%__scm_setup_bzr(q)\
%{__bzr} init %{-q}\
%{__bzr} whoami --branch "%{__scm_author}"\
%{__bzr} add .\
%{__bzr} commit %{-q} -m "%{NAME}-%{VERSION} base"

# bzr doesn't seem to have its own command to apply patches?
%__scm_apply_bzr(qp:m:)\
%{__patch} %{-p:-p%{-p*}} %{-q:-s}\
%{__bzr} commit %{-q} -m %{-m*}

# Single patch application
%__apply_patch(qp:m:)\
%{lua:\
local file = rpm.expand("%{1}")\
local num = rpm.expand("%{2}")\
if posix.access(file, "r") then\
    local options = rpm.expand("%{-q} %{-p:-p%{-p*}} %{-m:-m%{-m*}}")\
    local scm_apply = rpm.expand("%__scm_apply_%{__scm}")\
    print(rpm.expand("%{uncompress:"..file.."} | "..scm_apply.." "..options.."  "..file.." "..num.."\\n"))\
else\
    print("echo 'Cannot read "..file.."'; exit 1;".."\\n")\
end}

# Apply patches using %autosetup configured SCM.
# Typically used with no arguments to apply all patches in the order
# introduced in the spec, but alternatively can be used to apply indvidual
# patches in arbitrary order by passing them as arguments.
# -v		Verbose
# -q		Don't warn if there are no matching patches
# -p<N>		Prefix strip (ie patch -p argument)
# -m<min>       Apply patches with number >= min only (if no arguments)
# -M<max>       Apply patches with number <= max only (if no arguments)
%autopatch(vqp:m:M:) %{lua:
if #arg == 0 then
    local lo = tonumber(rpm.expand("%{-m:%{-m*}}"))
    local hi = tonumber(rpm.expand("%{-M:%{-M*}}"))
    for i, n in ipairs(patch_nums) do
        if ((not lo or n >= lo) and (not hi or n <= hi)) then
            table.insert(arg, n)
        end
    end
end
if #arg == 0 and not opt.q then
   macros.warn({rpm.expand("%{?__file_name:%{__file_name} line %{__file_lineno}}: autopatch: no matching patches in range")})
end
local options = rpm.expand("%{!-v:-q} %{-p:-p%{-p*}} ")
local bynum = {}
for i, p in ipairs(patches) do
    bynum[patch_nums[i]] = p
end
for i, a in ipairs(arg) do
    local p = bynum[tonumber(a)]
    if p then
        print(rpm.expand("%__apply_patch -m %{basename:"..p.."}  "..options..p.." "..i.."\\n"))
    else
        macros.error({"no such patch "..a})
    end
end
}


# One macro to (optionally) do it all.
# -S<scm name>	Sets the used patch application style, eg '-S git' enables
#           	usage of git repository and per-patch commits.
# -N		Disable automatic patch application
# -p<num>	Use -p<num> for patch application	
%autosetup(a:b:cCDn:TvNS:p:)\
%setup %{-a} %{-b} %{-c} %{-C} %{-D} %{-n} %{-T} %{!-v:-q}\
%{-S:%global __scm %{-S*}}\
%{expand:%__scm_setup_%{__scm} %{!-v:-q}}\
%{!-N:%autopatch -q %{-v} %{-p:-p%{-p*}}}

# Add a sysuser user/group to a package. Takes a sysusers.d(5) line as
# arguments, eg `%add_sysuser g mygroup 515`.
# -b option omits the "Provides: " and the "Requires:" lines for group
# membership to support formatting the entry outside spec context.
%add_sysuser(-) %{lua:
    if arg[1] == '-b' then
        prefix = ''
        table.remove(arg, 1)
    else
        prefix = 'Provides: '
    end
    if #arg < 2 then
        macros.error({'not enough arguments'})
    end
    name = arg[2]
    if arg[1] == 'g' then
        type = 'group'
    elseif arg[1] == 'u' or arg[1] == 'u!' then
        type = 'user'
    elseif arg[1] == 'm' and #arg >=3 then
        type = 'groupmember'
    elseif arg[1] == 'r' then
        macros.warn({'ignoring unsupported sysuser type: '..arg[1]})
        return
    else
        macros.error({'invalid sysuser type: '..arg[1]})
    end
    line = table.concat(arg, ' ')
    -- \0-pad source string to avoid '=' in the output
    llen = line:len()
    ulen = math.ceil(4 * (llen / 3))
    plen = 4 * math.ceil(llen / 3)
    pad = string.rep('\\0', plen-ulen)
    enc = rpm.b64encode(line..pad, 0);

    if type == 'groupmember' then
        print(string.format('%s%s(%s/%s) = %s\\n', prefix, type, name, arg[3], enc))
	if (prefix ~= '') then
	   prefix2 = rpm.expand('%[%{?_use_weak_usergroup_deps} > 0 ? "Recommends" : "Requires"]')
	   print(string.format('%s: user(%s)\\n', prefix2, name))
	   print(string.format('%s: group(%s)\\n', prefix2, arg[3]))
	end
    else
        print(string.format('%s%s(%s) = %s\\n', prefix, type, name, enc))
    end
    if type == 'user' then
        print(string.format('%s%s(%s)\\n', prefix, 'group', name))
    end
}

# Global buildsystem defaults
%buildsystem_default_prep() %autosetup -C -p1 %*

# \endverbatim
#*/