githubmirror/redis

tests/integration/replication-buffer.tcl
354 строки14 KB
debing.sun
Introduce DEBUG_DEFRAG compilation option to allow run test with activedefrag when allocator is not jemalloc (#14326)
10 сен 2025, 07:52
10 сен 2025, 07:5260adba4
#
# Copyright (c) 2009-Present, Redis Ltd.
# All rights reserved.
#
# Copyright (c) 2024-present, Valkey contributors.
# All rights reserved.
#
# Licensed under your choice of (a) the Redis Source Available License 2.0
# (RSALv2); or (b) the Server Side Public License v1 (SSPLv1); or (c) the
# GNU Affero General Public License v3 (AGPLv3).
#
# Portions of this file are available under BSD3 terms; see REDISCONTRIBUTIONS for more information.
#

# This test group aims to test that all replicas share one global replication buffer,
# two replicas don't make replication buffer size double, and when there is no replica,
# replica buffer will shrink.
foreach rdbchannel {"yes" "no"} {
start_server {tags {"repl external:skip"}} {
start_server {} {
start_server {} {
start_server {} {
    set replica1 [srv -3 client]
    set replica2 [srv -2 client]
    set replica3 [srv -1 client]

    $replica1 config set repl-rdb-channel $rdbchannel
    $replica2 config set repl-rdb-channel $rdbchannel
    $replica3 config set repl-rdb-channel $rdbchannel

    set master [srv 0 client]
    set master_host [srv 0 host]
    set master_port [srv 0 port]

    $master config set save ""
    $master config set repl-backlog-size 16384
    $master config set repl-diskless-sync-delay 5
    $master config set repl-diskless-sync-max-replicas 1
    $master config set client-output-buffer-limit "replica 0 0 0"
    $master config set repl-rdb-channel $rdbchannel

    # Make sure replica3 is synchronized with master
    $replica3 replicaof $master_host $master_port
    wait_for_sync $replica3

    # Generating RDB will take some 100 seconds
    $master config set rdb-key-save-delay 1000000
    populate 100 "" 16

    # Make sure replica1 and replica2 are waiting bgsave
    $master config set repl-diskless-sync-max-replicas 2
    $replica1 replicaof $master_host $master_port
    $replica2 replicaof $master_host $master_port
    wait_for_condition 50 100 {
        ([s rdb_bgsave_in_progress] == 1) &&
        [lindex [$replica1 role] 3] eq {sync} &&
        [lindex [$replica2 role] 3] eq {sync}
    } else {
        fail "fail to sync with replicas"
    }

    test "All replicas share one global replication buffer rdbchannel=$rdbchannel" {
        set before_used [s used_memory]
        populate 1024 "" 1024 ; # Write extra 1M data
        # New data uses 1M memory, but all replicas use only one
        # replication buffer, so all replicas output memory is not
        # more than double of replication buffer.
        set repl_buf_mem [s mem_total_replication_buffers]
        set extra_mem [expr {[s used_memory]-$before_used-1024*1024}]
        if {$rdbchannel == "yes"} {
            # master's replication buffers should not grow
            assert {$extra_mem < 1024*1024}
            assert {$repl_buf_mem < 1024*1024}
        } else {
            assert {$extra_mem < 2*$repl_buf_mem}
        }

        # Kill replica1, replication_buffer will not become smaller
        catch {$replica1 shutdown nosave}
        wait_for_condition 50 100 {
            [s connected_slaves] eq {2}
        } else {
            fail "replica doesn't disconnect with master"
        }
        assert_equal $repl_buf_mem [s mem_total_replication_buffers]
    }

    test "Replication buffer will become smaller when no replica uses rdbchannel=$rdbchannel" {
        # Make sure replica3 catch up with the master
        wait_for_ofs_sync $master $replica3

        set repl_buf_mem [s mem_total_replication_buffers]
        # Kill replica2, replication_buffer will become smaller
        catch {$replica2 shutdown nosave}
        wait_for_condition 50 100 {
            [s connected_slaves] eq {1}
        } else {
            fail "replica2 doesn't disconnect with master"
        }
        if {$rdbchannel == "yes"} {
            # master's replication buffers should not grow
            assert {1024*512 > [s mem_total_replication_buffers]}
        } else {
            assert {[expr $repl_buf_mem - 1024*1024] > [s mem_total_replication_buffers]}
        }
    }
}
}
}
}
}

# This test group aims to test replication backlog size can outgrow the backlog
# limit config if there is a slow replica which keep massive replication buffers,
# and replicas could use this replication buffer (beyond backlog config) for
# partial re-synchronization. Of course, replication backlog memory also can
# become smaller when master disconnects with slow replicas since output buffer
# limit is reached.
foreach rdbchannel {"yes" "no"} {
start_server {tags {"repl external:skip debug_defrag:skip"}} {
start_server {} {
start_server {} {
    set replica1 [srv -2 client]
    set replica1_pid [s -2 process_id]
    set replica2 [srv -1 client]
    set replica2_pid [s -1 process_id]

    set master [srv 0 client]
    set master_host [srv 0 host]
    set master_port [srv 0 port]

    $master config set save ""
    $master config set repl-backlog-size 16384
    $master config set repl-rdb-channel $rdbchannel
    $master config set client-output-buffer-limit "replica 0 0 0"

    # Executing 'debug digest' on master which has many keys costs much time
    # (especially in valgrind), this causes that replica1 and replica2 disconnect
    # with master.
    $master config set repl-timeout 1000
    $replica1 config set repl-timeout 1000
    $replica1 config set repl-rdb-channel $rdbchannel
    $replica1 config set client-output-buffer-limit "replica 1024 0 0"
    $replica2 config set repl-timeout 1000
    $replica2 config set client-output-buffer-limit "replica 1024 0 0"
    $replica2 config set repl-rdb-channel $rdbchannel

    $replica1 replicaof $master_host $master_port
    wait_for_sync $replica1

    test "Replication backlog size can outgrow the backlog limit config rdbchannel=$rdbchannel" {
        # Generating RDB will take 1000 seconds
        $master config set rdb-key-save-delay 1000000
        populate 1000 master 10000
        $replica2 replicaof $master_host $master_port
        # Make sure replica2 is waiting bgsave
        wait_for_condition 5000 100 {
            ([s rdb_bgsave_in_progress] == 1) &&
            [lindex [$replica2 role] 3] eq {sync}
        } else {
            fail "fail to sync with replicas"
        }
        # Replication actual backlog grow more than backlog setting since
        # the slow replica2 kept replication buffer.
        populate 20000 master 10000
        assert {[s repl_backlog_histlen] > [expr 10000*10000]}
    }

    # Wait replica1 catch up with the master
    wait_for_condition 1000 100 {
        [s -2 master_repl_offset] eq [s master_repl_offset]
    } else {
        fail "Replica offset didn't catch up with the master after too long time"
    }

    test "Replica could use replication buffer (beyond backlog config) for partial resynchronization rdbchannel=$rdbchannel" {
        # replica1 disconnects with master
        $replica1 replicaof [srv -1 host] [srv -1 port]
        # Write a mass of data that exceeds repl-backlog-size
        populate 10000 master 10000
        # replica1 reconnects with master
        $replica1 replicaof $master_host $master_port
        wait_for_condition 1000 100 {
            [s -2 master_repl_offset] eq [s master_repl_offset]
        } else {
            fail "Replica offset didn't catch up with the master after too long time"
        }

        # replica2 still waits for bgsave ending
        assert {[s rdb_bgsave_in_progress] eq {1} && [lindex [$replica2 role] 3] eq {sync}}
        # master accepted replica1 partial resync
        assert_equal [s sync_partial_ok] {1}
        assert_equal [$master debug digest] [$replica1 debug digest]
    }

    test "Replication backlog memory will become smaller if disconnecting with replica rdbchannel=$rdbchannel" {
        assert {[s repl_backlog_histlen] > [expr 2*10000*10000]}
        assert_equal [s connected_slaves] {2}

        pause_process $replica2_pid
        r config set client-output-buffer-limit "replica 128k 0 0"
        # trigger output buffer limit check
        r set key [string repeat A [expr 64*1024]]
        # master will close replica2's connection since replica2's output
        # buffer limit is reached, so there only is replica1.
        # In case of rdbchannel=yes, main channel will be disconnected only.
        wait_for_condition 100 100 {
            [s connected_slaves] eq {1} ||
            ([s connected_slaves] eq {2} &&
            [string match {*slave*state=wait_bgsave*} [$master info]])
        } else {
            fail "master didn't disconnect with replica2"
        }

        # Since we trim replication backlog inrementally, replication backlog
        # memory may take time to be reclaimed.
        wait_for_condition 1000 100 {
            [s repl_backlog_histlen] < [expr 10000*10000]
        } else {
            fail "Replication backlog memory is not smaller"
        }
        resume_process $replica2_pid
    }
    # speed up termination
    $master config set shutdown-timeout 0
}
}
}
}

foreach rdbchannel {"yes" "no"} {
test "Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size rdbchannel=$rdbchannel" {
    start_server {tags {"repl external:skip"}} {
        start_server {} {
            r config set save ""
            r config set repl-backlog-size 100mb
            r config set client-output-buffer-limit "replica 512k 0 0"
            r config set repl-rdb-channel $rdbchannel

            set replica [srv -1 client]
            $replica config set repl-rdb-channel $rdbchannel
            $replica replicaof [srv 0 host] [srv 0 port]
            wait_for_sync $replica

            set big_str [string repeat A [expr 10*1024*1024]] ;# 10mb big string
            r multi
            r client kill type replica
            r set key $big_str
            r set key $big_str
            r debug sleep 2 ;# wait for replica reconnecting
            r exec
            # When replica reconnects with master, master accepts partial resync,
            # and don't close replica client even client output buffer limit is
            # reached.
            r set key $big_str ;# trigger output buffer limit check
            wait_for_ofs_sync r $replica
            # master accepted replica partial resync
            assert_equal [s sync_full] {1}
            assert_equal [s sync_partial_ok] {1}

            r multi
            r set key $big_str
            r set key $big_str
            r exec
            # replica's reply buffer size is more than client-output-buffer-limit but
            # doesn't exceed repl-backlog-size, we don't close replica client.
            wait_for_condition 1000 100 {
                [s -1 master_repl_offset] eq [s master_repl_offset]
            } else {
                fail "Replica offset didn't catch up with the master after too long time"
            }
            assert_equal [s sync_full] {1}
            assert_equal [s sync_partial_ok] {1}
        }
    }
}

# This test was added to make sure big keys added to the backlog do not trigger psync loop.
test "Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending rdbchannel=$rdbchannel" {
    proc client_field {r type f} {
        set client [$r client list type $type]
        if {![regexp $f=(\[a-zA-Z0-9-\]+) $client - res]} {
            error "field $f not found for in $client"
        }
        return $res
    }

    start_server {tags {"repl external:skip"}} {
        start_server {} {
            set replica [srv -1 client]
            set replica_host [srv -1 host]
            set replica_port [srv -1 port]
            set master [srv 0 client]
            set master_host [srv 0 host]
            set master_port [srv 0 port]
            $master config set maxmemory-policy allkeys-lru

            $master config set repl-backlog-size 16384
            $master config set client-output-buffer-limit "replica 32768 32768 60"
            $master config set repl-rdb-channel $rdbchannel
            $replica config set repl-rdb-channel $rdbchannel
            # Key has has to be larger than replica client-output-buffer limit.
            set keysize [expr 256*1024]

            $replica replicaof $master_host $master_port
            wait_for_condition 50 100 {
                [lindex [$replica role] 0] eq {slave} &&
                [string match {*master_link_status:up*} [$replica info replication]]
            } else {
                fail "Can't turn the instance into a replica"
            }

            # Write a big key that is gonna breach the obuf limit and cause the replica to disconnect,
            # then in the same event loop, add at least 16 more keys, and enable eviction, so that the
            # eviction code has a chance to call flushSlavesOutputBuffers, and then run PING to trigger the eviction code
            set _v [prepare_value $keysize]
            $master write "[format_command mset key $_v k1 1 k2 2 k3 3 k4 4 k5 5 k6 6 k7 7 k8 8 k9 9 ka a kb b kc c kd d ke e kf f kg g kh h]config set maxmemory 1\r\nping\r\n"
            $master flush
            $master read
            $master read
            $master read
            wait_for_ofs_sync $master $replica

            # Write another key to force the test to wait for another event loop iteration so that we
            # give the serverCron a chance to disconnect replicas with COB size exceeding the limits
            $master config set maxmemory 0
            $master set key1 1
            wait_for_ofs_sync $master $replica

            assert {[status $master connected_slaves] == 1}

            wait_for_condition 50 100 {
                [client_field $master replica tot-mem] < $keysize
            } else {
                fail "replica client-output-buffer usage is higher than expected."
            }

            # now we expect the replica to re-connect but fail partial sync (it doesn't have large
            # enough COB limit and must result in a full-sync)
            assert {[status $master sync_partial_ok] == 0}

            # Before this fix (#11905), the test would trigger an assertion in 'o->used >= c->ref_block_pos'
            test {The update of replBufBlock's repl_offset is ok - Regression test for #11666} {
                set rd [redis_deferring_client]
                set replid [status $master master_replid]
                set offset [status $master repl_backlog_first_byte_offset]
                $rd psync $replid $offset
                assert_equal {PONG} [$master ping] ;# Make sure the master doesn't crash.
                $rd close
            }
        }
    }
}
}