src/bin/pg_dump/t/002_pg_dump.pl - master - githubmirror/postgres

src/bin/pg_dump/t/002_pg_dump.pl
5 381 строка153 KB
Michael Paquier
pg_dump: Remove dead code in TAP tests
16 июн 2026, 02:31
16 июн 2026, 02:31d3b345e

# Copyright (c) 2021-2026, PostgreSQL Global Development Group

use strict;
use warnings FATAL => 'all';

use PostgreSQL::Test::Cluster;
use PostgreSQL::Test::Utils;
use Test::More;

my $tempdir = PostgreSQL::Test::Utils::tempdir;

###############################################################
# Definition of the pg_dump runs to make.
#
# Each of these runs are named and those names are used below
# to define how each test should (or shouldn't) treat a result
# from a given run.
#
# test_key indicates that a given run should simply use the same
# set of like/unlike tests as another run, and which run that is.
#
# dump_cmd is the pg_dump command to run, which is an array of
# the full command and arguments to run.  Note that this is run
# using $node->command_ok(), so the port does not need to be
# specified and is pulled from $PGPORT, which is set by the
# PostgreSQL::Test::Cluster system.
#
# glob_patterns is an optional array consisting of strings compilable
# with glob() to check the files generated after a dump.
#
# command_like is an optional utility that can be used to compare
# the output generated by a command on the contents of an existing
# dump, like the TOC description of a pg_restore command.
#
# restore_cmd is the pg_restore command to run, if any.  Note
# that this should generally be used when the pg_dump goes to
# a non-text file and that the restore can then be used to
# generate a text file to run through the tests from the
# non-text file generated by pg_dump.
#
# TODO: Have pg_restore actually restore to an independent
# database and then pg_dump *that* database (or something along
# those lines) to validate that part of the process.

my $supports_icu = ($ENV{with_icu} eq 'yes');
my $supports_gzip = check_pg_config("#define HAVE_LIBZ 1");

my %pgdump_runs = (
	binary_upgrade => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/binary_upgrade.dump",
			'--no-password',
			'--no-data',
			'--sequence-data',
			'--binary-upgrade',
			'--statistics',
			'--dbname' => 'postgres',    # alternative way to specify database
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--verbose',
			'--file' => "$tempdir/binary_upgrade.sql",
			'--statistics',
			"$tempdir/binary_upgrade.dump",
		],
	},

	clean => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/clean.sql",
			'--clean',
			'--statistics',
			'--dbname' => 'postgres',    # alternative way to specify database
		],
	},
	clean_if_exists => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/clean_if_exists.sql",
			'--clean',
			'--if-exists',
			'--encoding' => 'UTF8',      # no-op, just for testing
			'--statistics',
			'postgres',
		],
	},
	column_inserts => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/column_inserts.sql",
			'--data-only',
			'--column-inserts', 'postgres',
		],
	},
	createdb => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/createdb.sql",
			'--create',
			'--no-reconnect',    # no-op, just for testing
			'--verbose',
			'--statistics',
			'postgres',
		],
	},
	data_only => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/data_only.sql",
			'--data-only',
			'--superuser' => 'test_superuser',
			'--disable-triggers',
			'--verbose',    # no-op, just make sure it works
			'postgres',
		],
	},
	defaults => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/defaults.sql",
			'--statistics',
			'postgres',
		],
	},
	defaults_no_public => {
		database => 'regress_pg_dump_test',
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/defaults_no_public.sql",
			'--statistics',
			'regress_pg_dump_test',
		],
	},
	defaults_no_public_clean => {
		database => 'regress_pg_dump_test',
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--clean',
			'--file' => "$tempdir/defaults_no_public_clean.sql",
			'--statistics',
			'regress_pg_dump_test',
		],
	},
	defaults_public_owner => {
		database => 'regress_public_owner',
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/defaults_public_owner.sql",
			'--statistics',
			'regress_public_owner',
		],
	},

	# Do not use --no-sync to give test coverage for data sync.
	# By default, the custom format compresses its data file
	# when the code is compiled with gzip support, and lets them
	# uncompressed when not compiled with it.
	defaults_custom_format => {
		test_key => 'defaults',
		dump_cmd => [
			'pg_dump',
			'--format' => 'custom',
			'--file' => "$tempdir/defaults_custom_format.dump",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/defaults_custom_format.sql",
			'--statistics',
			"$tempdir/defaults_custom_format.dump",
		],
		command_like => {
			command => [
				'pg_restore', '--list',
				"$tempdir/defaults_custom_format.dump",
			],
			expected => $supports_gzip
			? qr/Compression: gzip/
			: qr/Compression: none/,
			name => 'data content is gzip-compressed by default if available',
		},
	},

	# Do not use --no-sync to give test coverage for data sync.
	# By default, the directory format compresses its data files
	# when the code is compiled with gzip support, and lets them
	# uncompressed when not compiled with it.
	defaults_dir_format => {
		test_key => 'defaults',
		dump_cmd => [
			'pg_dump',
			'--format' => 'directory',
			'--file' => "$tempdir/defaults_dir_format",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'directory',
			'--file' => "$tempdir/defaults_dir_format.sql",
			'--statistics',
			"$tempdir/defaults_dir_format",
		],
		command_like => {
			command =>
			  [ 'pg_restore', '--list', "$tempdir/defaults_dir_format", ],
			expected => $supports_gzip ? qr/Compression: gzip/
			: qr/Compression: none/,
			name => 'data content is gzip-compressed by default',
		},
		glob_patterns => [
			"$tempdir/defaults_dir_format/toc.dat",
			"$tempdir/defaults_dir_format/blobs_*.toc",
			$supports_gzip ? "$tempdir/defaults_dir_format/*.dat.gz"
			: "$tempdir/defaults_dir_format/*.dat",
		],
	},

	# Do not use --no-sync to give test coverage for data sync.
	defaults_parallel => {
		test_key => 'defaults',
		dump_cmd => [
			'pg_dump',
			'--format' => 'directory',
			'--jobs' => 2,
			'--file' => "$tempdir/defaults_parallel",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--file' => "$tempdir/defaults_parallel.sql",
			'--statistics',
			"$tempdir/defaults_parallel",
		],
	},

	# Do not use --no-sync to give test coverage for data sync.
	defaults_tar_format => {
		test_key => 'defaults',
		dump_cmd => [
			'pg_dump',
			'--format' => 'tar',
			'--file' => "$tempdir/defaults_tar_format.tar",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'tar',
			'--file' => "$tempdir/defaults_tar_format.sql",
			'--statistics',
			"$tempdir/defaults_tar_format.tar",
		],
	},
	exclude_dump_test_schema => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/exclude_dump_test_schema.sql",
			'--exclude-schema' => 'dump_test',
			'--statistics',
			'postgres',
		],
	},
	exclude_test_table => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/exclude_test_table.sql",
			'--exclude-table' => 'dump_test.test_table',
			'--statistics',
			'postgres',
		],
	},
	exclude_measurement => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/exclude_measurement.sql",
			'--exclude-table-and-children' => 'dump_test.measurement',
			'--statistics',
			'postgres',
		],
	},
	exclude_measurement_data => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/exclude_measurement_data.sql",
			'--exclude-table-data-and-children' => 'dump_test.measurement',
			'--no-unlogged-table-data',
			'--statistics',
			'postgres',
		],
	},
	exclude_test_table_data => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/exclude_test_table_data.sql",
			'--exclude-table-data' => 'dump_test.test_table',
			'--no-unlogged-table-data',
			'--statistics',
			'postgres',
		],
	},
	inserts => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/inserts.sql",
			'--data-only',
			'--inserts', 'postgres',
		],
	},
	pg_dumpall_globals => {
		dump_cmd => [
			'pg_dumpall',
			'--verbose',
			'--file' => "$tempdir/pg_dumpall_globals.sql",
			'--globals-only',
			'--no-sync',
		],
	},
	pg_dumpall_globals_clean => {
		dump_cmd => [
			'pg_dumpall',
			'--file' => "$tempdir/pg_dumpall_globals_clean.sql",
			'--globals-only',
			'--clean',
			'--no-sync',
		],
	},
	pg_dumpall_dbprivs => {
		dump_cmd => [
			'pg_dumpall', '--no-sync',
			'--file' => "$tempdir/pg_dumpall_dbprivs.sql",
			'--statistics',
		],
	},
	pg_dumpall_exclude => {
		dump_cmd => [
			'pg_dumpall',
			'--verbose',
			'--file' => "$tempdir/pg_dumpall_exclude.sql",
			'--exclude-database' => '*dump_test*',
			'--no-sync',
			'--statistics',
		],
	},
	no_toast_compression => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_toast_compression.sql",
			'--no-toast-compression',
			'--statistics',
			'postgres',
		],
	},
	no_large_objects => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_large_objects.sql",
			'--no-large-objects',
			'--statistics',
			'postgres',
		],
	},
	no_policies => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_policies.sql",
			'--no-policies',
			'--statistics',
			'postgres',
		],
	},
	no_policies_restore => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/no_policies_restore.dump",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/no_policies_restore.sql",
			'--no-policies',
			'--statistics',
			"$tempdir/no_policies_restore.dump",
		],
	},
	no_privs => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_privs.sql",
			'--no-privileges',
			'--statistics',
			'postgres',
		],
	},
	no_owner => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_owner.sql",
			'--no-owner',
			'--statistics',
			'postgres',
		],
	},
	no_subscriptions => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_subscriptions.sql",
			'--no-subscriptions',
			'--statistics',
			'postgres',
		],
	},
	no_subscriptions_restore => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/no_subscriptions_restore.dump",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/no_subscriptions_restore.sql",
			'--no-subscriptions',
			'--statistics',
			"$tempdir/no_subscriptions_restore.dump",
		],
	},
	no_table_access_method => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/no_table_access_method.sql",
			'--no-table-access-method',
			'--statistics',
			'postgres',
		],
	},
	only_dump_test_schema => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/only_dump_test_schema.sql",
			'--schema' => 'dump_test',
			'--statistics',
			'postgres',
		],
	},
	only_dump_test_table => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/only_dump_test_table.sql",
			'--table' => 'dump_test.test_table',
			'--lock-wait-timeout' =>
			  (1000 * $PostgreSQL::Test::Utils::timeout_default),
			'--statistics',
			'postgres',
		],
	},
	only_dump_measurement => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/only_dump_measurement.sql",
			'--table-and-children' => 'dump_test.measurement',
			'--lock-wait-timeout' =>
			  (1000 * $PostgreSQL::Test::Utils::timeout_default),
			'--statistics',
			'postgres',
		],
	},
	role => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/role.sql",
			'--role' => 'regress_dump_test_role',
			'--schema' => 'dump_test_second_schema',
			'--statistics',
			'postgres',
		],
	},
	role_parallel => {
		test_key => 'role',
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'directory',
			'--jobs' => '2',
			'--file' => "$tempdir/role_parallel",
			'--role' => 'regress_dump_test_role',
			'--schema' => 'dump_test_second_schema',
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--file' => "$tempdir/role_parallel.sql",
			'--statistics',
			"$tempdir/role_parallel",
		],
	},
	rows_per_insert => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/rows_per_insert.sql",
			'--data-only',
			'--rows-per-insert' => '4',
			'--table' => 'dump_test.test_table',
			'--table' => 'dump_test.test_fourth_table',
			'postgres',
		],
	},
	schema_only => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'plain',
			'--file' => "$tempdir/schema_only.sql",
			'--schema-only',
			'postgres',
		],
	},
	section_pre_data => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/section_pre_data.sql",
			'--section' => 'pre-data',
			'--statistics',
			'postgres',
		],
	},
	section_data => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/section_data.sql",
			'--section' => 'data',
			'--statistics',
			'postgres',
		],
	},
	section_post_data => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/section_post_data.sql",
			'--section' => 'post-data',
			'--statistics',
			'postgres',
		],
	},
	test_schema_plus_large_objects => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--file' => "$tempdir/test_schema_plus_large_objects.sql",
			'--schema' => 'dump_test',
			'--large-objects',
			'--no-large-objects',
			'--statistics',
			'postgres',
		],
	},
	no_statistics => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			"--file=$tempdir/no_statistics.sql", '--no-statistics',
			'postgres',
		],
	},
	no_data_no_schema => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			"--file=$tempdir/no_data_no_schema.sql", '--no-data',
			'--no-schema', 'postgres',
			'--statistics',
		],
	},
	statistics_only => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			"--file=$tempdir/statistics_only.sql", '--statistics-only',
			'postgres',
		],
	},
	statistics_only_with_schema => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_schema.dump",
			'--statistics-only',
			'--schema' => 'dump_test',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_schema.sql",
			'--statistics-only',
			'--schema' => 'dump_test',
			"$tempdir/statistics_only_with_schema.dump",
		],
	},
	statistics_only_with_table => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_table.dump",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_table.sql",
			'--statistics-only',
			'--table' => 'test_table',
			'--schema' => 'dump_test',
			"$tempdir/statistics_only_with_table.dump",
		],
	},
	statistics_only_with_index => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_index.dump",
			'--statistics',
			'postgres',
		],
		restore_cmd => [
			'pg_restore',
			'--format' => 'custom',
			'--file' => "$tempdir/statistics_only_with_index.sql",
			'--statistics-only',
			'--index' => '"dump_test"\'s post-data index',
			'--schema' => 'dump_test',
			"$tempdir/statistics_only_with_index.dump",
		],
	},
	no_schema => {
		dump_cmd => [
			'pg_dump', '--no-sync',
			"--file=$tempdir/no_schema.sql", '--no-schema',
			'--statistics', 'postgres',
		],
	},);

###############################################################
# Definition of the tests to run.
#
# Each test is defined using the log message that will be used.
#
# A regexp should be defined for each test which provides the
# basis for the test.  That regexp will be run against the output
# file of each of the runs which the test is to be run against
# and the success of the result will depend on if the regexp
# result matches the expected 'like' or 'unlike' case.
#
# The runs listed as 'like' will be checked if they match the
# regexp and, if so, the test passes.  All runs which are not
# listed as 'like' will be checked to ensure they don't match
# the regexp; if they do, the test will fail.
#
# The below hashes provide convenience sets of runs.  Individual
# runs can be excluded from a general hash by placing that run
# into the 'unlike' section.
#
# For example, there is an 'exclude_test_table' run which runs a
# full pg_dump but with an exclude flag to not include the test
# table.  The CREATE TABLE test which creates the test table is
# defined with %full_runs but then has 'exclude_test_table' in
# its 'unlike' list, excluding that test.
#
# There can then be a 'create_sql' and 'create_order' for a
# given test.  The 'create_sql' commands are collected up in
# 'create_order' and then run against the database prior to any
# of the pg_dump runs happening.  This is what "seeds" the
# system with objects to be dumped out.
#
# Building of this hash takes a bit of time as all of the regexps
# included in it are compiled.  This greatly improves performance
# as the regexps are used for each run the test applies to.

# Tests which target the 'dump_test' schema, specifically.
my %dump_test_schema_runs = (
	only_dump_test_schema => 1,
	only_dump_measurement => 1,
	test_schema_plus_large_objects => 1,);

# Tests which are considered 'full' dumps by pg_dump, but there
# are flags used to exclude specific items (ACLs, LOs, etc).
my %full_runs = (
	binary_upgrade => 1,
	clean => 1,
	clean_if_exists => 1,
	createdb => 1,
	defaults => 1,
	exclude_dump_test_schema => 1,
	exclude_test_table => 1,
	exclude_test_table_data => 1,
	exclude_measurement => 1,
	exclude_measurement_data => 1,
	no_toast_compression => 1,
	no_large_objects => 1,
	no_owner => 1,
	no_policies => 1,
	no_policies_restore => 1,
	no_privs => 1,
	no_statistics => 1,
	no_subscriptions => 1,
	no_subscriptions_restore => 1,
	no_table_access_method => 1,
	pg_dumpall_dbprivs => 1,
	pg_dumpall_exclude => 1,
	schema_only => 1,);

# This is where the actual tests are defined.
my %tests = (
	'restrict' => {
		all_runs => 1,
		regexp => qr/^\\restrict [a-zA-Z0-9]+$/m,
	},

	'unrestrict' => {
		all_runs => 1,
		regexp => qr/^\\unrestrict [a-zA-Z0-9]+$/m,
	},

	'ALTER DEFAULT PRIVILEGES FOR ROLE regress_dump_test_role GRANT' => {
		create_order => 14,
		create_sql => 'ALTER DEFAULT PRIVILEGES
					   FOR ROLE regress_dump_test_role IN SCHEMA dump_test
					   GRANT SELECT ON TABLES TO regress_dump_test_role;',
		regexp => qr/^
			\QALTER DEFAULT PRIVILEGES \E
			\QFOR ROLE regress_dump_test_role IN SCHEMA dump_test \E
			\QGRANT SELECT ON TABLES TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER DEFAULT PRIVILEGES FOR ROLE regress_dump_test_role GRANT EXECUTE ON FUNCTIONS'
	  => {
		create_order => 15,
		create_sql => 'ALTER DEFAULT PRIVILEGES
					   FOR ROLE regress_dump_test_role IN SCHEMA dump_test
					   GRANT EXECUTE ON FUNCTIONS TO regress_dump_test_role;',
		regexp => qr/^
			\QALTER DEFAULT PRIVILEGES \E
			\QFOR ROLE regress_dump_test_role IN SCHEMA dump_test \E
			\QGRANT ALL ON FUNCTIONS TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	  },

	'ALTER DEFAULT PRIVILEGES FOR ROLE regress_dump_test_role REVOKE' => {
		create_order => 55,
		create_sql => 'ALTER DEFAULT PRIVILEGES
					   FOR ROLE regress_dump_test_role
					   REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;',
		regexp => qr/^
			\QALTER DEFAULT PRIVILEGES \E
			\QFOR ROLE regress_dump_test_role \E
			\QREVOKE ALL ON FUNCTIONS FROM PUBLIC;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
		unlike => { no_privs => 1, },
	},

	'ALTER DEFAULT PRIVILEGES FOR ROLE regress_dump_test_role REVOKE SELECT'
	  => {
		create_order => 56,
		create_sql => 'ALTER DEFAULT PRIVILEGES
					   FOR ROLE regress_dump_test_role
					   REVOKE SELECT ON TABLES FROM regress_dump_test_role;',
		regexp => qr/^
			\QALTER DEFAULT PRIVILEGES \E
			\QFOR ROLE regress_dump_test_role \E
			\QREVOKE ALL ON TABLES FROM regress_dump_test_role;\E\n
			\QALTER DEFAULT PRIVILEGES \E
			\QFOR ROLE regress_dump_test_role \E
			\QGRANT INSERT,REFERENCES,DELETE,TRIGGER,TRUNCATE,MAINTAIN,UPDATE ON TABLES TO regress_dump_test_role;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
		unlike => { no_privs => 1, },
	  },

	'ALTER ROLE regress_dump_test_role' => {
		regexp => qr/^
			\QALTER ROLE regress_dump_test_role WITH \E
			\QNOSUPERUSER INHERIT NOCREATEROLE NOCREATEDB NOLOGIN \E
			\QNOREPLICATION NOBYPASSRLS;\E
			/xm,
		like => {
			pg_dumpall_dbprivs => 1,
			pg_dumpall_globals => 1,
			pg_dumpall_globals_clean => 1,
			pg_dumpall_exclude => 1,
		},
	},

	'ALTER COLLATION test0 OWNER TO' => {
		regexp => qr/^\QALTER COLLATION public.test0 OWNER TO \E.+;/m,
		collation => 1,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_owner => 1, },
	},

	'ALTER FOREIGN DATA WRAPPER dummy OWNER TO' => {
		regexp => qr/^ALTER FOREIGN DATA WRAPPER dummy OWNER TO .+;/m,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_owner => 1, },
	},

	'ALTER SERVER s1 OWNER TO' => {
		regexp => qr/^ALTER SERVER s1 OWNER TO .+;/m,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_owner => 1, },
	},

	'ALTER FUNCTION dump_test.pltestlang_call_handler() OWNER TO' => {
		regexp => qr/^
			\QALTER FUNCTION dump_test.pltestlang_call_handler() \E
			\QOWNER TO \E
			.+;/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER OPERATOR FAMILY dump_test.op_family OWNER TO' => {
		regexp => qr/^
			\QALTER OPERATOR FAMILY dump_test.op_family USING btree \E
			\QOWNER TO \E
			.+;/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER OPERATOR FAMILY dump_test.op_family USING btree' => {
		create_order => 75,
		create_sql =>
		  'ALTER OPERATOR FAMILY dump_test.op_family USING btree ADD
						 OPERATOR 1 <(bigint,int4),
						 OPERATOR 2 <=(bigint,int4),
						 OPERATOR 3 =(bigint,int4),
						 OPERATOR 4 >=(bigint,int4),
						 OPERATOR 5 >(bigint,int4),
						 FUNCTION 1 (int4, int4) btint4cmp(int4,int4),
						 FUNCTION 2 (int4, int4) btint4sortsupport(internal),
						 FUNCTION 4 (int4, int4) btequalimage(oid);',
		# note: it's correct that btint8sortsupport and bigint btequalimage
		# are included here:
		regexp => qr/^
			\QALTER OPERATOR FAMILY dump_test.op_family USING btree ADD\E\n\s+
			\QOPERATOR 1 <(bigint,integer) ,\E\n\s+
			\QOPERATOR 2 <=(bigint,integer) ,\E\n\s+
			\QOPERATOR 3 =(bigint,integer) ,\E\n\s+
			\QOPERATOR 4 >=(bigint,integer) ,\E\n\s+
			\QOPERATOR 5 >(bigint,integer) ,\E\n\s+
			\QFUNCTION 1 (integer, integer) btint4cmp(integer,integer) ,\E\n\s+
			\QFUNCTION 2 (bigint, bigint) btint8sortsupport(internal) ,\E\n\s+
			\QFUNCTION 2 (integer, integer) btint4sortsupport(internal) ,\E\n\s+
			\QFUNCTION 4 (bigint, bigint) btequalimage(oid) ,\E\n\s+
			\QFUNCTION 4 (integer, integer) btequalimage(oid);\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER OPERATOR CLASS dump_test.op_class OWNER TO' => {
		regexp => qr/^
			\QALTER OPERATOR CLASS dump_test.op_class USING btree \E
			\QOWNER TO \E
			.+;/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER PUBLICATION pub1 OWNER TO' => {
		regexp => qr/^ALTER PUBLICATION pub1 OWNER TO .+;/m,
		like => { %full_runs, section_post_data => 1, },
		unlike => { no_owner => 1, },
	},

	'ALTER LARGE OBJECT ... OWNER TO' => {
		regexp => qr/^ALTER LARGE OBJECT \d+ OWNER TO .+;/m,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			binary_upgrade => 1,
			no_large_objects => 1,
			no_owner => 1,
			schema_only => 1,
		},
	},

	'ALTER PROCEDURAL LANGUAGE pltestlang OWNER TO' => {
		regexp => qr/^ALTER PROCEDURAL LANGUAGE pltestlang OWNER TO .+;/m,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_owner => 1, },
	},

	'ALTER SCHEMA dump_test OWNER TO' => {
		regexp => qr/^ALTER SCHEMA dump_test OWNER TO .+;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER SCHEMA dump_test_second_schema OWNER TO' => {
		regexp => qr/^ALTER SCHEMA dump_test_second_schema OWNER TO .+;/m,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
		},
		unlike => { no_owner => 1, },
	},

	'ALTER SCHEMA public OWNER TO' => {
		create_order => 15,
		create_sql =>
		  'ALTER SCHEMA public OWNER TO "regress_quoted  \"" role";',
		regexp => qr/^ALTER SCHEMA public OWNER TO .+;/m,
		like => {
			%full_runs, section_pre_data => 1,
		},
		unlike => { no_owner => 1, },
	},

	'ALTER SCHEMA public OWNER TO (w/o ACL changes)' => {
		database => 'regress_public_owner',
		create_order => 100,
		create_sql =>
		  'ALTER SCHEMA public OWNER TO "regress_quoted  \"" role";',
		regexp => qr/^(GRANT|REVOKE)/m,
		like => {},
	},

	'ALTER SEQUENCE test_table_col1_seq' => {
		regexp => qr/^
			\QALTER SEQUENCE dump_test.test_table_col1_seq OWNED BY dump_test.test_table.col1;\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY test_table ADD CONSTRAINT ... PRIMARY KEY' => {
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table\E \n^\s+
			\QADD CONSTRAINT test_table_pkey PRIMARY KEY (col1);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'CONSTRAINT NOT NULL / NOT VALID' => {
		create_sql => 'CREATE TABLE dump_test.test_table_nn (
							col1 int);
							CREATE TABLE dump_test.test_table_nn_2 (
							col1 int NOT NULL);
							CREATE TABLE dump_test.test_table_nn_chld1 (
							) INHERITS (dump_test.test_table_nn);
							CREATE TABLE dump_test.test_table_nn_chld2 (
								col1 int
							) INHERITS (dump_test.test_table_nn);
							CREATE TABLE dump_test.test_table_nn_chld3 (
							) INHERITS (dump_test.test_table_nn, dump_test.test_table_nn_2);
			ALTER TABLE dump_test.test_table_nn ADD CONSTRAINT nn NOT NULL col1 NOT VALID;
			ALTER TABLE dump_test.test_table_nn_chld1 VALIDATE CONSTRAINT nn;
			ALTER TABLE dump_test.test_table_nn_chld2 VALIDATE CONSTRAINT nn;
			COMMENT ON CONSTRAINT nn ON dump_test.test_table_nn IS \'nn comment is valid\';
			COMMENT ON CONSTRAINT nn ON dump_test.test_table_nn_chld2 IS \'nn_chld2 comment is valid\';',
		regexp => qr/^
			\QALTER TABLE dump_test.test_table_nn\E \n^\s+
			\QADD CONSTRAINT nn NOT NULL col1 NOT VALID;\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	# This constraint is invalid therefore it goes in SECTION_POST_DATA
	'COMMENT ON CONSTRAINT ON test_table_nn' => {
		regexp => qr/^
		\QCOMMENT ON CONSTRAINT nn ON dump_test.test_table_nn IS\E
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	# This constraint is valid therefore it goes in SECTION_PRE_DATA
	'COMMENT ON CONSTRAINT ON test_table_chld2' => {
		regexp => qr/^
		\QCOMMENT ON CONSTRAINT nn ON dump_test.test_table_nn_chld2 IS\E
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CONSTRAINT NOT NULL / NOT VALID (child1)' => {
		regexp => qr/^
		\QCREATE TABLE dump_test.test_table_nn_chld1 (\E\n
		^\s+\QCONSTRAINT nn NOT NULL col1\E$
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
			binary_upgrade => 1,
		},
	},

	'CONSTRAINT NOT NULL / NOT VALID (child2)' => {
		regexp => qr/^
		\QCREATE TABLE dump_test.test_table_nn_chld2 (\E\n
		^\s+\Qcol1 integer CONSTRAINT nn NOT NULL\E$
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CONSTRAINT NOT NULL / NOT VALID (child3)' => {
		regexp => qr/^
		\QCREATE TABLE dump_test.test_table_nn_chld3 (\E\n
		^\Q)\E$
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
			binary_upgrade => 1,
		},
	},

	'CONSTRAINT NOT NULL / NO INHERIT' => {
		create_sql => 'CREATE TABLE dump_test.test_table_nonn (
		col1 int NOT NULL NO INHERIT,
		col2 int);
		CREATE TABLE dump_test.test_table_nonn_chld1 (
		   CONSTRAINT nn NOT NULL col2 NO INHERIT)
		INHERITS (dump_test.test_table_nonn); ',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_nonn (\E \n^\s+
			\Qcol1 integer NOT NULL NO INHERIT\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs,
			section_pre_data => 1,
			binary_upgrade => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CONSTRAINT NOT NULL / NO INHERIT (child1)' => {
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_nonn_chld1 (\E \n^\s+
			\QCONSTRAINT nn NOT NULL col2 NO INHERIT\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
			binary_upgrade => 1,
		},
	},

	'CONSTRAINT PRIMARY KEY / WITHOUT OVERLAPS' => {
		create_sql => 'CREATE TABLE dump_test.test_table_tpk (
							col1 int4range,
							col2 tstzrange,
							CONSTRAINT test_table_tpk_pkey PRIMARY KEY (col1, col2 WITHOUT OVERLAPS));',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table_tpk\E \n^\s+
			\QADD CONSTRAINT test_table_tpk_pkey PRIMARY KEY (col1, col2 WITHOUT OVERLAPS);\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CONSTRAINT UNIQUE / WITHOUT OVERLAPS' => {
		create_sql => 'CREATE TABLE dump_test.test_table_tuq (
							col1 int4range,
							col2 tstzrange,
							CONSTRAINT test_table_tuq_uq UNIQUE (col1, col2 WITHOUT OVERLAPS));',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table_tuq\E \n^\s+
			\QADD CONSTRAINT test_table_tuq_uq UNIQUE (col1, col2 WITHOUT OVERLAPS);\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE (partitioned) ADD CONSTRAINT ... FOREIGN KEY' => {
		create_order => 4,
		create_sql => 'CREATE TABLE dump_test.test_table_fk (
							col1 int references dump_test.test_table)
							PARTITION BY RANGE (col1);
							CREATE TABLE dump_test.test_table_fk_1
							PARTITION OF dump_test.test_table_fk
							FOR VALUES FROM (0) TO (10);',
		regexp => qr/
			\QADD CONSTRAINT test_table_fk_col1_fkey FOREIGN KEY (col1) REFERENCES dump_test.test_table\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY test_table ALTER COLUMN col1 SET STATISTICS 90' => {
		create_order => 93,
		create_sql =>
		  'ALTER TABLE dump_test.test_table ALTER COLUMN col1 SET STATISTICS 90;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table ALTER COLUMN col1 SET STATISTICS 90;\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY test_table ALTER COLUMN col2 SET STORAGE' => {
		create_order => 94,
		create_sql =>
		  'ALTER TABLE dump_test.test_table ALTER COLUMN col2 SET STORAGE EXTERNAL;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table ALTER COLUMN col2 SET STORAGE EXTERNAL;\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY test_table ALTER COLUMN col3 SET STORAGE' => {
		create_order => 95,
		create_sql =>
		  'ALTER TABLE dump_test.test_table ALTER COLUMN col3 SET STORAGE MAIN;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table ALTER COLUMN col3 SET STORAGE MAIN;\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY test_table ALTER COLUMN col4 SET n_distinct' => {
		create_order => 95,
		create_sql =>
		  'ALTER TABLE dump_test.test_table ALTER COLUMN col4 SET (n_distinct = 10);',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_table ALTER COLUMN col4 SET (n_distinct=10);\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE ONLY dump_test.measurement ATTACH PARTITION measurement_y2006m2'
	  => {
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.measurement ATTACH PARTITION dump_test_second_schema.measurement_y2006m2 \E
			\QFOR VALUES FROM ('2006-02-01') TO ('2006-03-01');\E\n
			/xm,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
			binary_upgrade => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	  },

	'ALTER TABLE test_table CLUSTER ON test_table_pkey' => {
		create_order => 96,
		create_sql =>
		  'ALTER TABLE dump_test.test_table CLUSTER ON test_table_pkey',
		regexp => qr/^
			\QALTER TABLE dump_test.test_table CLUSTER ON test_table_pkey;\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE test_table DISABLE TRIGGER ALL' => {
		regexp => qr/^
			\QSET SESSION AUTHORIZATION 'test_superuser';\E\n\n
			\QALTER TABLE dump_test.test_table DISABLE TRIGGER ALL;\E\n\n
			\QCOPY dump_test.test_table (col1, col2, col3, col4) FROM stdin;\E
			\n(?:\d\t\\N\t\\N\t\\N\n){9}\\\.\n\n\n
			\QALTER TABLE dump_test.test_table ENABLE TRIGGER ALL;\E/xm,
		like => { data_only => 1, },
	},

	'ALTER FOREIGN TABLE foreign_table ALTER COLUMN c1 OPTIONS' => {
		regexp => qr/^
			\QALTER FOREIGN TABLE ONLY dump_test.foreign_table ALTER COLUMN c1 OPTIONS (\E\n
			\s+\Qcolumn_name 'col1'\E\n
			\Q);\E\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE test_table OWNER TO' => {
		regexp => qr/^\QALTER TABLE dump_test.test_table OWNER TO \E.+;/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
			no_owner => 1,
		},
	},

	'ALTER TABLE test_table ENABLE ROW LEVEL SECURITY' => {
		create_order => 23,
		create_sql => 'ALTER TABLE dump_test.test_table
					   ENABLE ROW LEVEL SECURITY;',
		regexp =>
		  qr/^\QALTER TABLE dump_test.test_table ENABLE ROW LEVEL SECURITY;\E/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE test_second_table OWNER TO' => {
		regexp =>
		  qr/^\QALTER TABLE dump_test.test_second_table OWNER TO \E.+;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE measurement OWNER TO' => {
		regexp => qr/^\QALTER TABLE dump_test.measurement OWNER TO \E.+;/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			exclude_measurement => 1,
		},
	},

	'ALTER TABLE measurement_y2006m2 OWNER TO' => {
		regexp =>
		  qr/^\QALTER TABLE dump_test_second_schema.measurement_y2006m2 OWNER TO \E.+;/m,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			no_owner => 1,
			exclude_measurement => 1,
		},
	},

	'ALTER FOREIGN TABLE foreign_table OWNER TO' => {
		regexp =>
		  qr/^\QALTER FOREIGN TABLE dump_test.foreign_table OWNER TO \E.+;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TEXT SEARCH CONFIGURATION alt_ts_conf1 OWNER TO' => {
		regexp =>
		  qr/^\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1 OWNER TO \E.+;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TEXT SEARCH DICTIONARY alt_ts_dict1 OWNER TO' => {
		regexp =>
		  qr/^\QALTER TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1 OWNER TO \E.+;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_owner => 1,
			only_dump_measurement => 1,
		},
	},

	'LO create (using lo_from_bytea)' => {
		create_order => 50,
		create_sql =>
		  'SELECT pg_catalog.lo_from_bytea(0, \'\\x310a320a330a340a350a360a370a380a390a\');',
		regexp => qr/^SELECT pg_catalog\.lo_create\('\d+'\);/m,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			binary_upgrade => 1,
			schema_only => 1,
			no_large_objects => 1,
		},
	},

	'LO load (using lo_from_bytea)' => {
		regexp => qr/^
			\QSELECT pg_catalog.lo_open\E \('\d+',\ \d+\);\n
			\QSELECT pg_catalog.lowrite(0, \E
			\Q'\x310a320a330a340a350a360a370a380a390a');\E\n
			\QSELECT pg_catalog.lo_close(0);\E
			/xm,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			binary_upgrade => 1,
			no_large_objects => 1,
			schema_only => 1,
		},
	},

	'LO create (with no data)' => {
		create_sql => 'SELECT pg_catalog.lo_create(0);',
		regexp => qr/^
			\QSELECT pg_catalog.lo_open\E \('\d+',\ \d+\);\n
			\QSELECT pg_catalog.lo_close(0);\E
			/xm,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			binary_upgrade => 1,
			no_large_objects => 1,
			schema_only => 1,
		},
	},

	'COMMENT ON DATABASE postgres' => {
		regexp => qr/^COMMENT ON DATABASE postgres IS .+;/m,

		# Should appear in the same tests as "CREATE DATABASE postgres"
		like => { createdb => 1, },
	},

	'COMMENT ON EXTENSION plpgsql' => {
		regexp => qr/^COMMENT ON EXTENSION plpgsql IS .+;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'COMMENT ON SCHEMA public' => {
		regexp => qr/^COMMENT ON SCHEMA public IS .+;/m,
		# regress_public_owner emits this, due to create_sql of next test
		like => {
			pg_dumpall_dbprivs => 1,
			pg_dumpall_exclude => 1,
		},
	},

	'COMMENT ON SCHEMA public IS NULL' => {
		database => 'regress_public_owner',
		create_order => 100,
		create_sql => 'COMMENT ON SCHEMA public IS NULL;',
		regexp => qr/^COMMENT ON SCHEMA public IS '';/m,
		like => { defaults_public_owner => 1 },
	},

	'COMMENT ON TABLE dump_test.test_table' => {
		create_order => 36,
		create_sql => 'COMMENT ON TABLE dump_test.test_table
					   IS \'comment on table\';',
		regexp =>
		  qr/^\QCOMMENT ON TABLE dump_test.test_table IS 'comment on table';\E/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON COLUMN dump_test.test_table.col1' => {
		create_order => 36,
		create_sql => 'COMMENT ON COLUMN dump_test.test_table.col1
					   IS \'comment on column\';',
		regexp => qr/^
			\QCOMMENT ON COLUMN dump_test.test_table.col1 IS 'comment on column';\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON COLUMN dump_test.composite.f1' => {
		create_order => 44,
		create_sql => 'COMMENT ON COLUMN dump_test.composite.f1
					   IS \'comment on column of type\';',
		regexp => qr/^
			\QCOMMENT ON COLUMN dump_test.composite.f1 IS 'comment on column of type';\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON COLUMN dump_test.test_second_table.col1' => {
		create_order => 63,
		create_sql => 'COMMENT ON COLUMN dump_test.test_second_table.col1
					   IS \'comment on column col1\';',
		regexp => qr/^
			\QCOMMENT ON COLUMN dump_test.test_second_table.col1 IS 'comment on column col1';\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON COLUMN dump_test.test_second_table.col2' => {
		create_order => 64,
		create_sql => 'COMMENT ON COLUMN dump_test.test_second_table.col2
					   IS \'comment on column col2\';',
		regexp => qr/^
			\QCOMMENT ON COLUMN dump_test.test_second_table.col2 IS 'comment on column col2';\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON CONVERSION dump_test.test_conversion' => {
		create_order => 79,
		create_sql => 'COMMENT ON CONVERSION dump_test.test_conversion
					   IS \'comment on test conversion\';',
		regexp =>
		  qr/^\QCOMMENT ON CONVERSION dump_test.test_conversion IS 'comment on test conversion';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON COLLATION test0' => {
		create_order => 77,
		create_sql => 'COMMENT ON COLLATION test0
					   IS \'comment on test0 collation\';',
		regexp =>
		  qr/^\QCOMMENT ON COLLATION public.test0 IS 'comment on test0 collation';\E/m,
		collation => 1,
		like => { %full_runs, section_pre_data => 1, },
	},

	'COMMENT ON LARGE OBJECT ...' => {
		create_order => 65,
		create_sql => 'DO $$
						 DECLARE myoid oid;
						 BEGIN
							SELECT loid FROM pg_largeobject INTO myoid;
							EXECUTE \'COMMENT ON LARGE OBJECT \' || myoid || \' IS \'\'comment on large object\'\';\';
						 END;
						 $$;',
		regexp => qr/^
			\QCOMMENT ON LARGE OBJECT \E[0-9]+\Q IS 'comment on large object';\E
			/xm,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			no_large_objects => 1,
			schema_only => 1,
		},
	},

	'COMMENT ON POLICY p1' => {
		create_order => 55,
		create_sql => 'COMMENT ON POLICY p1 ON dump_test.test_table
					   IS \'comment on policy\';',
		regexp =>
		  qr/^COMMENT ON POLICY p1 ON dump_test.test_table IS 'comment on policy';/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON PUBLICATION pub1' => {
		create_order => 55,
		create_sql => 'COMMENT ON PUBLICATION pub1
					   IS \'comment on publication\';',
		regexp =>
		  qr/^COMMENT ON PUBLICATION pub1 IS 'comment on publication';/m,
		like => { %full_runs, section_post_data => 1, },
	},

	'COMMENT ON SUBSCRIPTION sub1' => {
		create_order => 55,
		create_sql => 'COMMENT ON SUBSCRIPTION sub1
					   IS \'comment on subscription\';',
		regexp =>
		  qr/^COMMENT ON SUBSCRIPTION sub1 IS 'comment on subscription';/m,
		like => { %full_runs, section_post_data => 1, },
		unlike => {
			no_subscriptions => 1,
			no_subscriptions_restore => 1,
		},
	},

	'COMMENT ON TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1' => {
		create_order => 84,
		create_sql =>
		  'COMMENT ON TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1
					   IS \'comment on text search configuration\';',
		regexp =>
		  qr/^\QCOMMENT ON TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1 IS 'comment on text search configuration';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1' => {
		create_order => 84,
		create_sql =>
		  'COMMENT ON TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1
					   IS \'comment on text search dictionary\';',
		regexp =>
		  qr/^\QCOMMENT ON TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1 IS 'comment on text search dictionary';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TEXT SEARCH PARSER dump_test.alt_ts_prs1' => {
		create_order => 84,
		create_sql => 'COMMENT ON TEXT SEARCH PARSER dump_test.alt_ts_prs1
					   IS \'comment on text search parser\';',
		regexp =>
		  qr/^\QCOMMENT ON TEXT SEARCH PARSER dump_test.alt_ts_prs1 IS 'comment on text search parser';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1' => {
		create_order => 84,
		create_sql => 'COMMENT ON TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1
					   IS \'comment on text search template\';',
		regexp =>
		  qr/^\QCOMMENT ON TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1 IS 'comment on text search template';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TYPE dump_test.planets - ENUM' => {
		create_order => 68,
		create_sql => 'COMMENT ON TYPE dump_test.planets
					   IS \'comment on enum type\';',
		regexp =>
		  qr/^\QCOMMENT ON TYPE dump_test.planets IS 'comment on enum type';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TYPE dump_test.textrange - RANGE' => {
		create_order => 69,
		create_sql => 'COMMENT ON TYPE dump_test.textrange
					   IS \'comment on range type\';',
		regexp =>
		  qr/^\QCOMMENT ON TYPE dump_test.textrange IS 'comment on range type';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TYPE dump_test.int42 - Regular' => {
		create_order => 70,
		create_sql => 'COMMENT ON TYPE dump_test.int42
					   IS \'comment on regular type\';',
		regexp =>
		  qr/^\QCOMMENT ON TYPE dump_test.int42 IS 'comment on regular type';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON TYPE dump_test.undefined - Undefined' => {
		create_order => 71,
		create_sql => 'COMMENT ON TYPE dump_test.undefined
					   IS \'comment on undefined type\';',
		regexp =>
		  qr/^\QCOMMENT ON TYPE dump_test.undefined IS 'comment on undefined type';\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY test_table' => {
		create_order => 4,
		create_sql => 'INSERT INTO dump_test.test_table (col1) '
		  . 'SELECT generate_series FROM generate_series(1,9);',
		regexp => qr/^
			\QCOPY dump_test.test_table (col1, col2, col3, col4) FROM stdin;\E
			\n(?:\d\t\\N\t\\N\t\\N\n){9}\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			only_dump_test_table => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			exclude_test_table_data => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY fk_reference_test_table' => {
		create_order => 22,
		create_sql => 'INSERT INTO dump_test.fk_reference_test_table (col1) '
		  . 'SELECT generate_series FROM generate_series(1,5);',
		regexp => qr/^
			\QCOPY dump_test.fk_reference_test_table (col1) FROM stdin;\E
			\n(?:\d\n){5}\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			exclude_test_table => 1,
			exclude_test_table_data => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	# In a data-only dump, we try to actually order according to FKs,
	# so this check is just making sure that the referring table comes after
	# the referred-to table.
	'COPY fk_reference_test_table second' => {
		regexp => qr/^
			\QCOPY dump_test.test_table (col1, col2, col3, col4) FROM stdin;\E
			\n(?:\d\t\\N\t\\N\t\\N\n){9}\\\.\n.*
			\QCOPY dump_test.fk_reference_test_table (col1) FROM stdin;\E
			\n(?:\d\n){5}\\\.\n
			/xms,
		like => {
			data_only => 1,
			no_schema => 1,
		},
	},

	'COPY test_second_table' => {
		create_order => 7,
		create_sql => 'INSERT INTO dump_test.test_second_table (col1, col2) '
		  . 'SELECT generate_series, generate_series::text '
		  . 'FROM generate_series(1,9);',
		regexp => qr/^
			\QCOPY dump_test.test_second_table (col1, col2) FROM stdin;\E
			\n(?:\d\t\d\n){9}\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY test_third_table' => {
		create_order => 7,
		create_sql =>
		  'INSERT INTO dump_test.test_third_table VALUES (123, DEFAULT, 456);',
		regexp => qr/^
			\QCOPY dump_test.test_third_table (f1, "F3") FROM stdin;\E
			\n123\t456\n\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY test_fourth_table' => {
		create_order => 7,
		create_sql =>
		  'INSERT INTO dump_test.test_fourth_table DEFAULT VALUES;'
		  . 'INSERT INTO dump_test.test_fourth_table DEFAULT VALUES;',
		regexp => qr/^
			\QCOPY dump_test.test_fourth_table  FROM stdin;\E
			\n\n\n\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY test_fifth_table' => {
		create_order => 54,
		create_sql =>
		  'INSERT INTO dump_test.test_fifth_table VALUES (NULL, true, false, \'11001\'::bit(5), \'NaN\');',
		regexp => qr/^
			\QCOPY dump_test.test_fifth_table (col1, col2, col3, col4, col5) FROM stdin;\E
			\n\\N\tt\tf\t11001\tNaN\n\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'COPY test_table_identity' => {
		create_order => 54,
		create_sql =>
		  'INSERT INTO dump_test.test_table_identity (col2) VALUES (\'test\');',
		regexp => qr/^
			\QCOPY dump_test.test_table_identity (col1, col2) FROM stdin;\E
			\n1\ttest\n\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			section_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'INSERT INTO test_table' => {
		regexp => qr/^
			(?:INSERT\ INTO\ dump_test\.test_table\ \(col1,\ col2,\ col3,\ col4\)\ VALUES\ \(\d,\ NULL,\ NULL,\ NULL\);\n){9}
			/xm,
		like => { column_inserts => 1, },
	},

	'test_table with 4-row INSERTs' => {
		regexp => qr/^
			(?:
				INSERT\ INTO\ dump_test\.test_table\ VALUES\n
				(?:\t\(\d,\ NULL,\ NULL,\ NULL\),\n){3}
				\t\(\d,\ NULL,\ NULL,\ NULL\);\n
			){2}
			INSERT\ INTO\ dump_test\.test_table\ VALUES\n
			\t\(\d,\ NULL,\ NULL,\ NULL\);
			/xm,
		like => { rows_per_insert => 1, },
	},

	'INSERT INTO test_second_table' => {
		regexp => qr/^
			(?:INSERT\ INTO\ dump_test\.test_second_table\ \(col1,\ col2\)
			   \ VALUES\ \(\d,\ '\d'\);\n){9}/xm,
		like => { column_inserts => 1, },
	},

	'INSERT INTO test_third_table (colnames)' => {
		regexp =>
		  qr/^INSERT INTO dump_test\.test_third_table \(f1, "F3"\) VALUES \(123, 456\);\n/m,
		like => { column_inserts => 1, },
	},

	'INSERT INTO test_third_table' => {
		regexp =>
		  qr/^INSERT INTO dump_test\.test_third_table VALUES \(123, DEFAULT, 456, DEFAULT\);\n/m,
		like => { inserts => 1, },
	},

	'INSERT INTO test_fourth_table' => {
		regexp =>
		  qr/^(?:INSERT INTO dump_test\.test_fourth_table DEFAULT VALUES;\n){2}/m,
		like => { column_inserts => 1, inserts => 1, rows_per_insert => 1, },
	},

	'INSERT INTO test_fifth_table' => {
		regexp =>
		  qr/^\QINSERT INTO dump_test.test_fifth_table (col1, col2, col3, col4, col5) VALUES (NULL, true, false, B'11001', 'NaN');\E/m,
		like => { column_inserts => 1, },
	},

	'INSERT INTO test_table_identity' => {
		regexp =>
		  qr/^\QINSERT INTO dump_test.test_table_identity (col1, col2) OVERRIDING SYSTEM VALUE VALUES (1, 'test');\E/m,
		like => { column_inserts => 1, },
	},

	'CREATE ROLE regress_dump_test_role' => {
		create_order => 1,
		create_sql => 'CREATE ROLE regress_dump_test_role;',
		regexp => qr/^CREATE ROLE regress_dump_test_role;/m,
		like => {
			pg_dumpall_dbprivs => 1,
			pg_dumpall_exclude => 1,
			pg_dumpall_globals => 1,
			pg_dumpall_globals_clean => 1,
		},
	},

	'CREATE ROLE regress_quoted...' => {
		create_order => 1,
		create_sql => 'CREATE ROLE "regress_quoted  \"" role";',
		regexp => qr/^CREATE ROLE "regress_quoted  \\"" role";/m,
		like => {
			pg_dumpall_dbprivs => 1,
			pg_dumpall_exclude => 1,
			pg_dumpall_globals => 1,
			pg_dumpall_globals_clean => 1,
		},
	},

	'newline of table name in comment' => {
		create_sql => qq{-- meet getPartitioningInfo() "unsafe" condition
						 CREATE TYPE pp_colors AS
							ENUM ('green', 'blue', 'black');
						 CREATE TABLE pp_enumpart (a pp_colors)
							PARTITION BY HASH (a);
						 CREATE TABLE pp_enumpart1 PARTITION OF pp_enumpart
							FOR VALUES WITH (MODULUS 2, REMAINDER 0);
						 CREATE TABLE pp_enumpart2 PARTITION OF pp_enumpart
							FOR VALUES WITH (MODULUS 2, REMAINDER 1);
						 ALTER TABLE pp_enumpart
							RENAME TO "pp_enumpart\nattack";},
		regexp => qr/\n--[^\n]*\nattack/s,
		like => {},
	},

	'CREATE TABLESPACE regress_dump_tablespace' => {
		create_order => 2,
		create_sql => q(
		    SET allow_in_place_tablespaces = on;
			CREATE TABLESPACE regress_dump_tablespace
			OWNER regress_dump_test_role LOCATION ''),
		regexp =>
		  qr/^CREATE TABLESPACE regress_dump_tablespace OWNER regress_dump_test_role LOCATION '';/m,
		like => {
			pg_dumpall_dbprivs => 1,
			pg_dumpall_exclude => 1,
			pg_dumpall_globals => 1,
			pg_dumpall_globals_clean => 1,
		},
	},

	'CREATE DATABASE regression_invalid...' => {
		create_order => 1,
		create_sql => q(
		    CREATE DATABASE regression_invalid;
			UPDATE pg_database SET datconnlimit = -2 WHERE datname = 'regression_invalid'),
		regexp => qr/^CREATE DATABASE regression_invalid/m,

		# invalid databases should never be dumped
		like => {},
	},

	'CREATE ACCESS METHOD gist2' => {
		create_order => 52,
		create_sql =>
		  'CREATE ACCESS METHOD gist2 TYPE INDEX HANDLER gisthandler;',
		regexp =>
		  qr/CREATE ACCESS METHOD gist2 TYPE INDEX HANDLER gisthandler;/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE COLLATION test0 FROM "C"' => {
		create_order => 76,
		create_sql => 'CREATE COLLATION test0 FROM "C";',
		regexp =>
		  qr/CREATE COLLATION public.test0 \(provider = libc, locale = 'C'(, version = '[^']*')?\);/m,
		collation => 1,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE COLLATION icu_collation' => {
		create_order => 76,
		create_sql =>
		  "CREATE COLLATION icu_collation (PROVIDER = icu, LOCALE = 'en-US-u-va-posix');",
		regexp =>
		  qr/CREATE COLLATION public.icu_collation \(provider = icu, locale = 'en-US-u-va-posix'(, version = '[^']*')?\);/m,
		icu => 1,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE CAST FOR timestamptz' => {
		create_order => 51,
		create_sql =>
		  'CREATE CAST (timestamptz AS interval) WITH FUNCTION age(timestamptz) AS ASSIGNMENT;',
		regexp =>
		  qr/CREATE CAST \(timestamp with time zone AS interval\) WITH FUNCTION pg_catalog\.age\(timestamp with time zone\) AS ASSIGNMENT;/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE DATABASE postgres' => {
		regexp => qr/^
			\QCREATE DATABASE postgres WITH TEMPLATE = template0 \E
			.+;/xm,
		like => { createdb => 1, },
	},

	'CREATE DATABASE dump_test' => {
		create_order => 47,
		create_sql => 'CREATE DATABASE dump_test;',
		regexp => qr/^
			\QCREATE DATABASE dump_test WITH TEMPLATE = template0 \E
			.+;/xm,
		like => { pg_dumpall_dbprivs => 1, },
	},

	"CREATE DATABASE dump_test2 LOCALE = 'C'" => {
		create_order => 47,
		create_sql =>
		  "CREATE DATABASE dump_test2 LOCALE = 'C' TEMPLATE = template0;",
		regexp => qr/^
			\QCREATE DATABASE dump_test2 \E.*\QLOCALE = 'C';\E
			/xm,
		like => { pg_dumpall_dbprivs => 1, },
	},

	'CREATE EXTENSION ... plpgsql' => {
		regexp => qr/^
			\QCREATE EXTENSION IF NOT EXISTS plpgsql WITH SCHEMA pg_catalog;\E
			/xm,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'CREATE AGGREGATE dump_test.newavg' => {
		create_order => 25,
		create_sql => 'CREATE AGGREGATE dump_test.newavg (
						  sfunc = int4_avg_accum,
						  basetype = int4,
						  stype = _int8,
						  finalfunc = int8_avg,
						  finalfunc_modify = shareable,
						  initcond1 = \'{0,0}\'
					   );',
		regexp => qr/^
			\QCREATE AGGREGATE dump_test.newavg(integer) (\E
			\n\s+\QSFUNC = int4_avg_accum,\E
			\n\s+\QSTYPE = bigint[],\E
			\n\s+\QINITCOND = '{0,0}',\E
			\n\s+\QFINALFUNC = int8_avg,\E
			\n\s+\QFINALFUNC_MODIFY = SHAREABLE\E
			\n\);/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			exclude_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE CONVERSION dump_test.test_conversion' => {
		create_order => 78,
		create_sql =>
		  'CREATE DEFAULT CONVERSION dump_test.test_conversion FOR \'LATIN1\' TO \'UTF8\' FROM iso8859_1_to_utf8;',
		regexp =>
		  qr/^\QCREATE DEFAULT CONVERSION dump_test.test_conversion FOR 'LATIN1' TO 'UTF8' FROM iso8859_1_to_utf8;\E/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE DOMAIN dump_test.us_postal_code' => {
		create_order => 29,
		create_sql => 'CREATE DOMAIN dump_test.us_postal_code AS TEXT
		               COLLATE "C"
					   DEFAULT \'10014\'
					   CONSTRAINT nn NOT NULL
					   CHECK(VALUE ~ \'^\d{5}$\' OR
							 VALUE ~ \'^\d{5}-\d{4}$\');
					   COMMENT ON CONSTRAINT nn
						 ON DOMAIN dump_test.us_postal_code IS \'not null\';
					   COMMENT ON CONSTRAINT us_postal_code_check
						 ON DOMAIN dump_test.us_postal_code IS \'check it\';',
		regexp => qr/^
			\QCREATE DOMAIN dump_test.us_postal_code AS text COLLATE pg_catalog."C" CONSTRAINT nn NOT NULL DEFAULT '10014'::text\E\n\s+
			\QCONSTRAINT us_postal_code_check CHECK \E
			\Q(((VALUE ~ '^\d{5}\E
			\$\Q'::text) OR (VALUE ~ '^\d{5}-\d{4}\E\$
			\Q'::text)));\E(.|\n)*
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON CONSTRAINT ON DOMAIN (1)' => {
		regexp => qr/^
		\QCOMMENT ON CONSTRAINT nn ON DOMAIN dump_test.us_postal_code IS 'not null';\E
		/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'COMMENT ON CONSTRAINT ON DOMAIN (2)' => {
		regexp => qr/^
		\QCOMMENT ON CONSTRAINT us_postal_code_check ON DOMAIN dump_test.us_postal_code IS 'check it';\E
		/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION dump_test.pltestlang_call_handler' => {
		create_order => 17,
		create_sql => 'CREATE FUNCTION dump_test.pltestlang_call_handler()
					   RETURNS LANGUAGE_HANDLER AS \'$libdir/plpgsql\',
					   \'plpgsql_call_handler\' LANGUAGE C;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.pltestlang_call_handler() \E
			\QRETURNS language_handler\E
			\n\s+\QLANGUAGE c\E
			\n\s+AS\ \'\$
			\Qlibdir\/plpgsql', 'plpgsql_call_handler';\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION dump_test.trigger_func' => {
		create_order => 30,
		create_sql => 'CREATE FUNCTION dump_test.trigger_func()
					   RETURNS trigger LANGUAGE plpgsql
					   AS $$ BEGIN RETURN NULL; END;$$;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.trigger_func() RETURNS trigger\E
			\n\s+\QLANGUAGE plpgsql\E
			\n\s+AS\ \$\$
			\Q BEGIN RETURN NULL; END;\E
			\$\$;/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION dump_test.event_trigger_func' => {
		create_order => 32,
		create_sql => 'CREATE FUNCTION dump_test.event_trigger_func()
					   RETURNS event_trigger LANGUAGE plpgsql
					   AS $$ BEGIN RETURN; END;$$;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.event_trigger_func() RETURNS event_trigger\E
			\n\s+\QLANGUAGE plpgsql\E
			\n\s+AS\ \$\$
			\Q BEGIN RETURN; END;\E
			\$\$;/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE OPERATOR FAMILY dump_test.op_family' => {
		create_order => 73,
		create_sql =>
		  'CREATE OPERATOR FAMILY dump_test.op_family USING btree;',
		regexp => qr/^
			\QCREATE OPERATOR FAMILY dump_test.op_family USING btree;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE OPERATOR CLASS dump_test.op_class' => {
		create_order => 74,
		create_sql => 'CREATE OPERATOR CLASS dump_test.op_class
		                 FOR TYPE bigint USING btree FAMILY dump_test.op_family
						 AS STORAGE bigint,
						 OPERATOR 1 <(bigint,bigint),
						 OPERATOR 2 <=(bigint,bigint),
						 OPERATOR 3 =(bigint,bigint),
						 OPERATOR 4 >=(bigint,bigint),
						 OPERATOR 5 >(bigint,bigint),
						 FUNCTION 1 btint8cmp(bigint,bigint),
						 FUNCTION 2 btint8sortsupport(internal),
						 FUNCTION 4 btequalimage(oid);',
		# note: it's correct that btint8sortsupport and btequalimage
		# are NOT included here (they're optional support functions):
		regexp => qr/^
			\QCREATE OPERATOR CLASS dump_test.op_class\E\n\s+
			\QFOR TYPE bigint USING btree FAMILY dump_test.op_family AS\E\n\s+
			\QOPERATOR 1 <(bigint,bigint) ,\E\n\s+
			\QOPERATOR 2 <=(bigint,bigint) ,\E\n\s+
			\QOPERATOR 3 =(bigint,bigint) ,\E\n\s+
			\QOPERATOR 4 >=(bigint,bigint) ,\E\n\s+
			\QOPERATOR 5 >(bigint,bigint) ,\E\n\s+
			\QFUNCTION 1 (bigint, bigint) btint8cmp(bigint,bigint);\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	# verify that a custom operator/opclass/range type is dumped in right order
	'CREATE OPERATOR CLASS dump_test.op_class_custom' => {
		create_order => 74,
		create_sql => 'CREATE OPERATOR dump_test.~~ (
							 PROCEDURE = int4eq,
							 LEFTARG = int,
							 RIGHTARG = int);
						 CREATE OPERATOR CLASS dump_test.op_class_custom
							 FOR TYPE int USING btree AS
							 OPERATOR 3 dump_test.~~;
						 CREATE TYPE dump_test.range_type_custom AS RANGE (
							 subtype = int,
							 subtype_opclass = dump_test.op_class_custom);',
		regexp => qr/^
			\QCREATE OPERATOR dump_test.~~ (\E\n.+
			\QCREATE OPERATOR FAMILY dump_test.op_class_custom USING btree;\E\n.+
			\QCREATE OPERATOR CLASS dump_test.op_class_custom\E\n\s+
			\QFOR TYPE integer USING btree FAMILY dump_test.op_class_custom AS\E\n\s+
			\QOPERATOR 3 dump_test.~~(integer,integer);\E\n.+
			\QCREATE TYPE dump_test.range_type_custom AS RANGE (\E\n\s+
			\Qsubtype = integer,\E\n\s+
			\Qmultirange_type_name = dump_test.multirange_type_custom,\E\n\s+
			\Qsubtype_opclass = dump_test.op_class_custom\E\n
			\Q);\E
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE OPERATOR CLASS dump_test.op_class_empty' => {
		create_order => 89,
		create_sql => 'CREATE OPERATOR CLASS dump_test.op_class_empty
		                 FOR TYPE bigint USING btree FAMILY dump_test.op_family
						 AS STORAGE bigint;',
		regexp => qr/^
			\QCREATE OPERATOR CLASS dump_test.op_class_empty\E\n\s+
			\QFOR TYPE bigint USING btree FAMILY dump_test.op_family AS\E\n\s+
			\QSTORAGE bigint;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE EVENT TRIGGER test_event_trigger' => {
		create_order => 33,
		create_sql => 'CREATE EVENT TRIGGER test_event_trigger
					   ON ddl_command_start
					   EXECUTE FUNCTION dump_test.event_trigger_func();',
		regexp => qr/^
			\QCREATE EVENT TRIGGER test_event_trigger \E
			\QON ddl_command_start\E
			\n\s+\QEXECUTE FUNCTION dump_test.event_trigger_func();\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE TRIGGER test_trigger' => {
		create_order => 31,
		create_sql => 'CREATE TRIGGER test_trigger
					   BEFORE INSERT ON dump_test.test_table
					   FOR EACH ROW WHEN (NEW.col1 > 10)
					   EXECUTE FUNCTION dump_test.trigger_func();',
		regexp => qr/^
			\QCREATE TRIGGER test_trigger BEFORE INSERT ON dump_test.test_table \E
			\QFOR EACH ROW WHEN ((new.col1 > 10)) \E
			\QEXECUTE FUNCTION dump_test.trigger_func();\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_test_table => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.planets AS ENUM' => {
		create_order => 37,
		create_sql => 'CREATE TYPE dump_test.planets
					   AS ENUM ( \'venus\', \'earth\', \'mars\' );',
		regexp => qr/^
			\QCREATE TYPE dump_test.planets AS ENUM (\E
			\n\s+'venus',
			\n\s+'earth',
			\n\s+'mars'
			\n\);/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.planets AS ENUM pg_upgrade' => {
		regexp => qr/^
			\QCREATE TYPE dump_test.planets AS ENUM (\E
			\n\);.*^
			\QALTER TYPE dump_test.planets ADD VALUE 'venus';\E
			\n.*^
			\QALTER TYPE dump_test.planets ADD VALUE 'earth';\E
			\n.*^
			\QALTER TYPE dump_test.planets ADD VALUE 'mars';\E
			\n/xms,
		like => { binary_upgrade => 1, },
	},

	'CREATE TYPE dump_test.textrange AS RANGE' => {
		create_order => 38,
		create_sql => 'CREATE TYPE dump_test.textrange
					   AS RANGE (subtype=text, collation="C");',
		regexp => qr/^
			\QCREATE TYPE dump_test.textrange AS RANGE (\E
			\n\s+\Qsubtype = text,\E
			\n\s+\Qmultirange_type_name = dump_test.textmultirange,\E
			\n\s+\Qcollation = pg_catalog."C"\E
			\n\);/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.int42' => {
		create_order => 39,
		create_sql => 'CREATE TYPE dump_test.int42;',
		regexp => qr/^\QCREATE TYPE dump_test.int42;\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1' => {
		create_order => 80,
		create_sql =>
		  'CREATE TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1 (copy=english);',
		regexp => qr/^
			\QCREATE TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1 (\E\n
			\s+\QPARSER = pg_catalog."default" );\E/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1 ...' => {
		regexp => qr/^
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR asciiword WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR word WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR numword WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR email WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR url WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR host WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR sfloat WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR version WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR hword_numpart WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR hword_part WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR hword_asciipart WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR numhword WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR asciihword WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR hword WITH english_stem;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR url_path WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR file WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR "float" WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR "int" WITH simple;\E\n
			\n
			\QALTER TEXT SEARCH CONFIGURATION dump_test.alt_ts_conf1\E\n
			\s+\QADD MAPPING FOR uint WITH simple;\E\n
			\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1' => {
		create_order => 81,
		create_sql =>
		  'CREATE TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1 (lexize=dsimple_lexize);',
		regexp => qr/^
			\QCREATE TEXT SEARCH TEMPLATE dump_test.alt_ts_temp1 (\E\n
			\s+\QLEXIZE = dsimple_lexize );\E/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TEXT SEARCH PARSER dump_test.alt_ts_prs1' => {
		create_order => 82,
		create_sql => 'CREATE TEXT SEARCH PARSER dump_test.alt_ts_prs1
		(start = prsd_start, gettoken = prsd_nexttoken, end = prsd_end, lextypes = prsd_lextype);',
		regexp => qr/^
			\QCREATE TEXT SEARCH PARSER dump_test.alt_ts_prs1 (\E\n
			\s+\QSTART = prsd_start,\E\n
			\s+\QGETTOKEN = prsd_nexttoken,\E\n
			\s+\QEND = prsd_end,\E\n
			\s+\QLEXTYPES = prsd_lextype );\E\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1' => {
		create_order => 83,
		create_sql =>
		  'CREATE TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1 (template=simple);',
		regexp => qr/^
			\QCREATE TEXT SEARCH DICTIONARY dump_test.alt_ts_dict1 (\E\n
			\s+\QTEMPLATE = pg_catalog.simple );\E\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION dump_test.int42_in' => {
		create_order => 40,
		create_sql => 'CREATE FUNCTION dump_test.int42_in(cstring)
					   RETURNS dump_test.int42 AS \'int4in\'
					   LANGUAGE internal STRICT IMMUTABLE;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.int42_in(cstring) RETURNS dump_test.int42\E
			\n\s+\QLANGUAGE internal IMMUTABLE STRICT\E
			\n\s+AS\ \$\$int4in\$\$;
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION dump_test.int42_out' => {
		create_order => 41,
		create_sql => 'CREATE FUNCTION dump_test.int42_out(dump_test.int42)
					   RETURNS cstring AS \'int4out\'
					   LANGUAGE internal STRICT IMMUTABLE;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.int42_out(dump_test.int42) RETURNS cstring\E
			\n\s+\QLANGUAGE internal IMMUTABLE STRICT\E
			\n\s+AS\ \$\$int4out\$\$;
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FUNCTION ... SUPPORT' => {
		create_order => 41,
		create_sql =>
		  'CREATE FUNCTION dump_test.func_with_support() RETURNS int LANGUAGE sql AS $$ SELECT 1 $$ SUPPORT varchar_support;',
		regexp => qr/^
			\QCREATE FUNCTION dump_test.func_with_support() RETURNS integer\E
			\n\s+\QLANGUAGE sql SUPPORT varchar_support\E
			\n\s+AS\ \$\$\Q SELECT 1 \E\$\$;
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'Check ordering of a function that depends on a primary key' => {
		create_order => 41,
		create_sql => '
			CREATE TABLE dump_test.ordering_table (id int primary key, data int);
			CREATE FUNCTION dump_test.ordering_func ()
			RETURNS SETOF dump_test.ordering_table
			LANGUAGE sql BEGIN ATOMIC
			SELECT * FROM dump_test.ordering_table GROUP BY id; END;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.ordering_table\E
			\n\s+\QADD CONSTRAINT ordering_table_pkey PRIMARY KEY (id);\E
			.*^
			\QCREATE FUNCTION dump_test.ordering_func\E/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE PROCEDURE dump_test.ptest1' => {
		create_order => 41,
		create_sql => 'CREATE PROCEDURE dump_test.ptest1(a int)
					   LANGUAGE SQL AS $$ INSERT INTO dump_test.test_table (col1) VALUES (a) $$;',
		regexp => qr/^
			\QCREATE PROCEDURE dump_test.ptest1(IN a integer)\E
			\n\s+\QLANGUAGE sql\E
			\n\s+AS\ \$\$\Q INSERT INTO dump_test.test_table (col1) VALUES (a) \E\$\$;
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.int42 populated' => {
		create_order => 42,
		create_sql => 'CREATE TYPE dump_test.int42 (
						   internallength = 4,
						   input = dump_test.int42_in,
						   output = dump_test.int42_out,
						   alignment = int4,
						   default = 42,
						   passedbyvalue);',
		regexp => qr/^
			\QCREATE TYPE dump_test.int42 (\E
			\n\s+\QINTERNALLENGTH = 4,\E
			\n\s+\QINPUT = dump_test.int42_in,\E
			\n\s+\QOUTPUT = dump_test.int42_out,\E
			\n\s+\QDEFAULT = '42',\E
			\n\s+\QALIGNMENT = int4,\E
			\n\s+\QSTORAGE = plain,\E
			\n\s+PASSEDBYVALUE\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.composite' => {
		create_order => 43,
		create_sql => 'CREATE TYPE dump_test.composite AS (
						   f1 int,
						   f2 dump_test.int42
					   );',
		regexp => qr/^
			\QCREATE TYPE dump_test.composite AS (\E
			\n\s+\Qf1 integer,\E
			\n\s+\Qf2 dump_test.int42\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TYPE dump_test.undefined' => {
		create_order => 39,
		create_sql => 'CREATE TYPE dump_test.undefined;',
		regexp => qr/^\QCREATE TYPE dump_test.undefined;\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE FOREIGN DATA WRAPPER dummy' => {
		create_order => 35,
		create_sql => 'CREATE FOREIGN DATA WRAPPER dummy;',
		regexp => qr/CREATE FOREIGN DATA WRAPPER dummy;/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE SERVER s1 FOREIGN DATA WRAPPER dummy' => {
		create_order => 36,
		create_sql => 'CREATE SERVER s1 FOREIGN DATA WRAPPER dummy;',
		regexp => qr/CREATE SERVER s1 FOREIGN DATA WRAPPER dummy;/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE FOREIGN TABLE dump_test.foreign_table SERVER s1' => {
		create_order => 88,
		create_sql =>
		  'CREATE FOREIGN TABLE dump_test.foreign_table (c1 int options (column_name \'col1\'))
						SERVER s1 OPTIONS (schema_name \'x1\');',
		regexp => qr/
			\QCREATE FOREIGN TABLE dump_test.foreign_table (\E\n
			\s+\Qc1 integer\E\n
			\Q)\E\n
			\QSERVER s1\E\n
			\QOPTIONS (\E\n
			\s+\Qschema_name 'x1'\E\n
			\Q);\E\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE USER MAPPING FOR regress_dump_test_role SERVER s1' => {
		create_order => 86,
		create_sql =>
		  'CREATE USER MAPPING FOR regress_dump_test_role SERVER s1;',
		regexp =>
		  qr/CREATE USER MAPPING FOR regress_dump_test_role SERVER s1;/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE TRANSFORM FOR int' => {
		create_order => 34,
		create_sql =>
		  'CREATE TRANSFORM FOR int LANGUAGE SQL (FROM SQL WITH FUNCTION prsd_lextype(internal), TO SQL WITH FUNCTION int4recv(internal));',
		regexp =>
		  qr/CREATE TRANSFORM FOR integer LANGUAGE sql \(FROM SQL WITH FUNCTION pg_catalog\.prsd_lextype\(internal\), TO SQL WITH FUNCTION pg_catalog\.int4recv\(internal\)\);/m,
		like => { %full_runs, section_pre_data => 1, },
	},

	'CREATE LANGUAGE pltestlang' => {
		create_order => 18,
		create_sql => 'CREATE LANGUAGE pltestlang
					   HANDLER dump_test.pltestlang_call_handler;',
		regexp => qr/^
			\QCREATE PROCEDURAL LANGUAGE pltestlang \E
			\QHANDLER dump_test.pltestlang_call_handler;\E
			/xm,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { exclude_dump_test_schema => 1, },
	},

	'CREATE MATERIALIZED VIEW matview' => {
		create_order => 20,
		create_sql => 'CREATE MATERIALIZED VIEW dump_test.matview (col1) AS
					   SELECT col1 FROM dump_test.test_table;',
		regexp => qr/^
			\QCREATE MATERIALIZED VIEW dump_test.matview AS\E
			\n\s+\QSELECT col1\E
			\n\s+\QFROM dump_test.test_table\E
			\n\s+\QWITH NO DATA;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE MATERIALIZED VIEW matview_second' => {
		create_order => 21,
		create_sql => 'CREATE MATERIALIZED VIEW
						   dump_test.matview_second (col1) AS
						   SELECT * FROM dump_test.matview;',
		regexp => qr/^
			\QCREATE MATERIALIZED VIEW dump_test.matview_second AS\E
			\n\s+\QSELECT col1\E
			\n\s+\QFROM dump_test.matview\E
			\n\s+\QWITH NO DATA;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE MATERIALIZED VIEW matview_third' => {
		create_order => 58,
		create_sql => 'CREATE MATERIALIZED VIEW
						   dump_test.matview_third (col1) AS
						   SELECT * FROM dump_test.matview_second WITH NO DATA;',
		regexp => qr/^
			\QCREATE MATERIALIZED VIEW dump_test.matview_third AS\E
			\n\s+\QSELECT col1\E
			\n\s+\QFROM dump_test.matview_second\E
			\n\s+\QWITH NO DATA;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE MATERIALIZED VIEW matview_fourth' => {
		create_order => 59,
		create_sql => 'CREATE MATERIALIZED VIEW
						   dump_test.matview_fourth (col1) AS
						   SELECT * FROM dump_test.matview_third WITH NO DATA;',
		regexp => qr/^
			\QCREATE MATERIALIZED VIEW dump_test.matview_fourth AS\E
			\n\s+\QSELECT col1\E
			\n\s+\QFROM dump_test.matview_third\E
			\n\s+\QWITH NO DATA;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'Check ordering of a matview that depends on a primary key' => {
		create_order => 42,
		create_sql => '
			CREATE MATERIALIZED VIEW dump_test.ordering_view AS
				SELECT * FROM dump_test.ordering_table GROUP BY id;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.ordering_table\E
			\n\s+\QADD CONSTRAINT ordering_table_pkey PRIMARY KEY (id);\E
			.*^
			\QCREATE MATERIALIZED VIEW dump_test.ordering_view AS\E
			\n\s+\QSELECT id,\E/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p1 ON test_table' => {
		create_order => 22,
		create_sql => 'CREATE POLICY p1 ON dump_test.test_table
						   USING (true)
						   WITH CHECK (true);',
		regexp => qr/^
			\QCREATE POLICY p1 ON dump_test.test_table \E
			\QUSING (true) WITH CHECK (true);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p2 ON test_table FOR SELECT' => {
		create_order => 24,
		create_sql => 'CREATE POLICY p2 ON dump_test.test_table
						   FOR SELECT TO regress_dump_test_role USING (true);',
		regexp => qr/^
			\QCREATE POLICY p2 ON dump_test.test_table FOR SELECT TO regress_dump_test_role \E
			\QUSING (true);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p3 ON test_table FOR INSERT' => {
		create_order => 25,
		create_sql => 'CREATE POLICY p3 ON dump_test.test_table
						   FOR INSERT TO regress_dump_test_role WITH CHECK (true);',
		regexp => qr/^
			\QCREATE POLICY p3 ON dump_test.test_table FOR INSERT \E
			\QTO regress_dump_test_role WITH CHECK (true);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p4 ON test_table FOR UPDATE' => {
		create_order => 26,
		create_sql => 'CREATE POLICY p4 ON dump_test.test_table FOR UPDATE
						   TO regress_dump_test_role USING (true) WITH CHECK (true);',
		regexp => qr/^
			\QCREATE POLICY p4 ON dump_test.test_table FOR UPDATE TO regress_dump_test_role \E
			\QUSING (true) WITH CHECK (true);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p5 ON test_table FOR DELETE' => {
		create_order => 27,
		create_sql => 'CREATE POLICY p5 ON dump_test.test_table
						   FOR DELETE TO regress_dump_test_role USING (true);',
		regexp => qr/^
			\QCREATE POLICY p5 ON dump_test.test_table FOR DELETE \E
			\QTO regress_dump_test_role USING (true);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE POLICY p6 ON test_table AS RESTRICTIVE' => {
		create_order => 27,
		create_sql => 'CREATE POLICY p6 ON dump_test.test_table AS RESTRICTIVE
						   USING (false);',
		regexp => qr/^
			\QCREATE POLICY p6 ON dump_test.test_table AS RESTRICTIVE \E
			\QUSING (false);\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_policies => 1,
			no_policies_restore => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE PROPERTY GRAPH propgraph' => {
		create_order => 20,
		create_sql => 'CREATE PROPERTY GRAPH dump_test.propgraph;',
		regexp => qr/^
			\QCREATE PROPERTY GRAPH dump_test.propgraph\E;
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike =>
		  { exclude_dump_test_schema => 1, only_dump_measurement => 1, },
	},

	'CREATE PUBLICATION pub1' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub1;',
		regexp => qr/^
			\QCREATE PUBLICATION pub1 WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub2' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub2
						 FOR ALL TABLES
						 WITH (publish = \'\');',
		regexp => qr/^
			\QCREATE PUBLICATION pub2 FOR ALL TABLES WITH (publish = '');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub3' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub3;',
		regexp => qr/^
			\QCREATE PUBLICATION pub3 WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub4' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub4;',
		regexp => qr/^
			\QCREATE PUBLICATION pub4 WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub5' => {
		create_order => 50,
		create_sql =>
		  'CREATE PUBLICATION pub5 WITH (publish_generated_columns = stored);',
		regexp => qr/^
			\QCREATE PUBLICATION pub5 WITH (publish = 'insert, update, delete, truncate', publish_generated_columns = stored);\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub6' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub6
						 FOR ALL SEQUENCES;',
		regexp => qr/^
			\QCREATE PUBLICATION pub6 FOR ALL SEQUENCES WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub7' => {
		create_order => 50,
		create_sql => 'CREATE PUBLICATION pub7
						 FOR ALL SEQUENCES, ALL TABLES
						 WITH (publish = \'\');',
		regexp => qr/^
			\QCREATE PUBLICATION pub7 FOR ALL TABLES, ALL SEQUENCES WITH (publish = '');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub8' => {
		create_order => 50,
		create_sql =>
		  'CREATE PUBLICATION pub8 FOR ALL TABLES EXCEPT (TABLE dump_test.test_table);',
		regexp => qr/^
			\QCREATE PUBLICATION pub8 FOR ALL TABLES EXCEPT (TABLE ONLY dump_test.test_table) WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub9' => {
		create_order => 50,
		create_sql =>
		  'CREATE PUBLICATION pub9 FOR ALL TABLES EXCEPT (TABLE dump_test.test_table, dump_test.test_second_table);',
		regexp => qr/^
			\QCREATE PUBLICATION pub9 FOR ALL TABLES EXCEPT (TABLE ONLY dump_test.test_table, TABLE ONLY dump_test.test_second_table) WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE PUBLICATION pub10' => {
		create_order => 92,
		create_sql =>
		  'CREATE PUBLICATION pub10 FOR ALL TABLES EXCEPT (TABLE dump_test.test_inheritance_parent);',
		regexp => qr/^
			\QCREATE PUBLICATION pub10 FOR ALL TABLES EXCEPT (TABLE ONLY dump_test.test_inheritance_parent, TABLE ONLY dump_test.test_inheritance_child) WITH (publish = 'insert, update, delete, truncate');\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	'CREATE SUBSCRIPTION sub1' => {
		create_order => 50,
		create_sql => 'CREATE SUBSCRIPTION sub1
						 CONNECTION \'dbname=doesnotexist\' PUBLICATION pub1
						 WITH (connect = false);',
		regexp => qr/^
			\QCREATE SUBSCRIPTION sub1 CONNECTION 'dbname=doesnotexist' PUBLICATION pub1 WITH (connect = false, slot_name = 'sub1', streaming = parallel);\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
		unlike => {
			no_subscriptions => 1,
			no_subscriptions_restore => 1,
		},
	},

	'CREATE SUBSCRIPTION sub2' => {
		create_order => 50,
		create_sql => 'CREATE SUBSCRIPTION sub2
						 CONNECTION \'dbname=doesnotexist\' PUBLICATION pub1
						 WITH (connect = false, origin = none, streaming = off);',
		regexp => qr/^
			\QCREATE SUBSCRIPTION sub2 CONNECTION 'dbname=doesnotexist' PUBLICATION pub1 WITH (connect = false, slot_name = 'sub2', streaming = off, origin = none);\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
		unlike => {
			no_subscriptions => 1,
			no_subscriptions_restore => 1,
		},
	},

	'CREATE SUBSCRIPTION sub3' => {
		create_order => 50,
		create_sql => 'CREATE SUBSCRIPTION sub3
						 CONNECTION \'dbname=doesnotexist\' PUBLICATION pub1
						 WITH (connect = false, origin = any, streaming = on);',
		regexp => qr/^
			\QCREATE SUBSCRIPTION sub3 CONNECTION 'dbname=doesnotexist' PUBLICATION pub1 WITH (connect = false, slot_name = 'sub3', streaming = on);\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
		unlike => {
			no_subscriptions => 1,
			no_subscriptions_restore => 1,
		},
	},


	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub1 ADD TABLE test_table' => {
		create_order => 51,
		create_sql =>
		  'ALTER PUBLICATION pub1 ADD TABLE dump_test.test_table;',
		regexp => qr/^
			\QALTER PUBLICATION pub1 ADD TABLE ONLY dump_test.test_table;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub1 ADD TABLE test_second_table' => {
		create_order => 52,
		create_sql =>
		  'ALTER PUBLICATION pub1 ADD TABLE dump_test.test_second_table;',
		regexp => qr/^
			\QALTER PUBLICATION pub1 ADD TABLE ONLY dump_test.test_second_table;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub1 ADD TABLE test_sixth_table (col3, col2)' => {
		create_order => 52,
		create_sql =>
		  'ALTER PUBLICATION pub1 ADD TABLE dump_test.test_sixth_table (col3, col2);',
		regexp => qr/^
			\QALTER PUBLICATION pub1 ADD TABLE ONLY dump_test.test_sixth_table (col2, col3);\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub1 ADD TABLE test_seventh_table (col3, col2) WHERE (col1 = 1)'
	  => {
		create_order => 52,
		create_sql =>
		  'ALTER PUBLICATION pub1 ADD TABLE dump_test.test_seventh_table (col3, col2) WHERE (col1 = 1);',
		regexp => qr/^
			\QALTER PUBLICATION pub1 ADD TABLE ONLY dump_test.test_seventh_table (col2, col3) WHERE ((col1 = 1));\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	  },

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub3 ADD TABLES IN SCHEMA dump_test' => {
		create_order => 51,
		create_sql =>
		  'ALTER PUBLICATION pub3 ADD TABLES IN SCHEMA dump_test;',
		regexp => qr/^
			\QALTER PUBLICATION pub3 ADD TABLES IN SCHEMA dump_test;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub3 ADD TABLES IN SCHEMA public' => {
		create_order => 52,
		create_sql => 'ALTER PUBLICATION pub3 ADD TABLES IN SCHEMA public;',
		regexp => qr/^
			\QALTER PUBLICATION pub3 ADD TABLES IN SCHEMA public;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub3 ADD TABLE test_table' => {
		create_order => 51,
		create_sql =>
		  'ALTER PUBLICATION pub3 ADD TABLE dump_test.test_table;',
		regexp => qr/^
			\QALTER PUBLICATION pub3 ADD TABLE ONLY dump_test.test_table;\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub4 ADD TABLE test_table WHERE (col1 > 0);' => {
		create_order => 51,
		create_sql =>
		  'ALTER PUBLICATION pub4 ADD TABLE dump_test.test_table WHERE (col1 > 0);',
		regexp => qr/^
			\QALTER PUBLICATION pub4 ADD TABLE ONLY dump_test.test_table WHERE ((col1 > 0));\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	},

	# Regardless of whether the table or schema is excluded, publications must
	# still be dumped, as excluded objects do not apply to publications. We
	# perform table and schema exclusion via full_runs.
	'ALTER PUBLICATION pub4 ADD TABLE test_second_table WHERE (col2 = \'test\');'
	  => {
		create_order => 52,
		create_sql =>
		  'ALTER PUBLICATION pub4 ADD TABLE dump_test.test_second_table WHERE (col2 = \'test\');',
		regexp => qr/^
			\QALTER PUBLICATION pub4 ADD TABLE ONLY dump_test.test_second_table WHERE ((col2 = 'test'::text));\E
			/xm,
		like => { %full_runs, section_post_data => 1, },
	  },

	'CREATE SCHEMA public' => {
		regexp => qr/^CREATE SCHEMA public;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'CREATE SCHEMA dump_test' => {
		create_order => 2,
		create_sql => 'CREATE SCHEMA dump_test;',
		regexp => qr/^CREATE SCHEMA dump_test;/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE SCHEMA dump_test_second_schema' => {
		create_order => 9,
		create_sql => 'CREATE SCHEMA dump_test_second_schema;',
		regexp => qr/^CREATE SCHEMA dump_test_second_schema;/m,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
		},
	},

	'CREATE TABLE test_table' => {
		create_order => 3,
		create_sql => 'CREATE TABLE dump_test.test_table (
						   col1 serial primary key,
						   col2 text COMPRESSION pglz,
						   col3 text,
						   col4 text,
						   CHECK (col1 <= 1000)
					   ) WITH (autovacuum_enabled = false, fillfactor=80);
					   COMMENT ON CONSTRAINT test_table_col1_check
						 ON dump_test.test_table IS \'bounds check\';',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table (\E\n
			\s+\Qcol1 integer NOT NULL,\E\n
			\s+\Qcol2 text,\E\n
			\s+\Qcol3 text,\E\n
			\s+\Qcol4 text,\E\n
			\s+\QCONSTRAINT test_table_col1_check CHECK ((col1 <= 1000))\E\n
			\Q)\E\n
			\QWITH (autovacuum_enabled='false', fillfactor='80');\E\n(.|\n)*
			\QCOMMENT ON CONSTRAINT test_table_col1_check ON dump_test.test_table IS 'bounds check';\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE fk_reference_test_table' => {
		create_order => 21,
		create_sql => 'CREATE TABLE dump_test.fk_reference_test_table (
						   col1 int primary key references dump_test.test_table
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.fk_reference_test_table (\E
			\n\s+\Qcol1 integer NOT NULL\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_second_table' => {
		create_order => 6,
		create_sql => 'CREATE TABLE dump_test.test_second_table (
						   col1 int,
						   col2 text
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_second_table (\E
			\n\s+\Qcol1 integer,\E
			\n\s+\Qcol2 text\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE measurement PARTITIONED BY' => {
		create_order => 90,
		create_sql => 'CREATE TABLE dump_test.measurement (
						city_id serial not null,
						logdate date not null,
						peaktemp int CHECK (peaktemp >= -460),
						unitsales int
					   ) PARTITION BY RANGE (logdate);',
		regexp => qr/^
			\Q-- Name: measurement;\E.*\n
			\Q--\E\n\n
			\QCREATE TABLE dump_test.measurement (\E\n
			\s+\Qcity_id integer NOT NULL,\E\n
			\s+\Qlogdate date NOT NULL,\E\n
			\s+\Qpeaktemp integer,\E\n
			\s+\Qunitsales integer,\E\n
			\s+\QCONSTRAINT measurement_peaktemp_check CHECK ((peaktemp >= '-460'::integer))\E\n
			\)\n
			\QPARTITION BY RANGE (logdate);\E\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			exclude_measurement => 1,
		},
	},

	'Partition measurement_y2006m2 creation' => {
		create_order => 91,
		create_sql =>
		  'CREATE TABLE dump_test_second_schema.measurement_y2006m2
						PARTITION OF dump_test.measurement (
							unitsales DEFAULT 0 CHECK (unitsales >= 0)
						)
						FOR VALUES FROM (\'2006-02-01\') TO (\'2006-03-01\');',
		regexp => qr/^
			\QCREATE TABLE dump_test_second_schema.measurement_y2006m2 (\E\n
			\s+\Qcity_id integer DEFAULT nextval('dump_test.measurement_city_id_seq'::regclass) CONSTRAINT measurement_city_id_not_null NOT NULL,\E\n
			\s+\Qlogdate date CONSTRAINT measurement_logdate_not_null NOT NULL,\E\n
			\s+\Qpeaktemp integer,\E\n
			\s+\Qunitsales integer DEFAULT 0,\E\n
			\s+\QCONSTRAINT measurement_peaktemp_check CHECK ((peaktemp >= '-460'::integer)),\E\n
			\s+\QCONSTRAINT measurement_y2006m2_unitsales_check CHECK ((unitsales >= 0))\E\n
			\);\n
			/xm,
		like => {
			%full_runs,
			section_pre_data => 1,
			role => 1,
			binary_upgrade => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'Creation of row-level trigger in partitioned table' => {
		create_order => 92,
		create_sql => 'CREATE TRIGGER test_trigger
		   AFTER INSERT ON dump_test.measurement
		   FOR EACH ROW EXECUTE PROCEDURE dump_test.trigger_func()',
		regexp => qr/^
			\QCREATE TRIGGER test_trigger AFTER INSERT ON dump_test.measurement \E
			\QFOR EACH ROW \E
			\QEXECUTE FUNCTION dump_test.trigger_func();\E
			/xm,
		like => {
			%full_runs, %dump_test_schema_runs,
			section_post_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_measurement => 1,
		},
	},

	'COPY measurement' => {
		create_order => 93,
		create_sql =>
		  'INSERT INTO dump_test.measurement (city_id, logdate, peaktemp, unitsales) '
		  . "VALUES (1, '2006-02-12', 35, 1);",
		regexp => qr/^
			\QCOPY dump_test_second_schema.measurement_y2006m2 (city_id, logdate, peaktemp, unitsales) FROM stdin;\E
			\n(?:1\t2006-02-12\t35\t1\n)\\\.\n
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			data_only => 1,
			no_schema => 1,
			only_dump_measurement => 1,
			section_data => 1,
			only_dump_test_schema => 1,
			role_parallel => 1,
			role => 1,
		},
		unlike => {
			binary_upgrade => 1,
			schema_only => 1,
			exclude_measurement => 1,
			only_dump_test_schema => 1,
			test_schema_plus_large_objects => 1,
			exclude_measurement => 1,
			exclude_measurement_data => 1,
		},
	},

	'Disabled trigger on partition is altered' => {
		create_order => 93,
		create_sql =>
		  'CREATE TABLE dump_test_second_schema.measurement_y2006m3
						PARTITION OF dump_test.measurement
						FOR VALUES FROM (\'2006-03-01\') TO (\'2006-04-01\');
						ALTER TABLE dump_test_second_schema.measurement_y2006m3 DISABLE TRIGGER test_trigger;
						CREATE TABLE dump_test_second_schema.measurement_y2006m4
						PARTITION OF dump_test.measurement
						FOR VALUES FROM (\'2006-04-01\') TO (\'2006-05-01\');
						ALTER TABLE dump_test_second_schema.measurement_y2006m4 ENABLE REPLICA TRIGGER test_trigger;
						CREATE TABLE dump_test_second_schema.measurement_y2006m5
						PARTITION OF dump_test.measurement
						FOR VALUES FROM (\'2006-05-01\') TO (\'2006-06-01\');
						ALTER TABLE dump_test_second_schema.measurement_y2006m5 ENABLE ALWAYS TRIGGER test_trigger;
						',
		regexp => qr/^
			\QALTER TABLE dump_test_second_schema.measurement_y2006m3 DISABLE TRIGGER test_trigger;\E
			/xm,
		like => {
			%full_runs,
			section_post_data => 1,
			role => 1,
			binary_upgrade => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'Replica trigger on partition is altered' => {
		regexp => qr/^
			\QALTER TABLE dump_test_second_schema.measurement_y2006m4 ENABLE REPLICA TRIGGER test_trigger;\E
			/xm,
		like => {
			%full_runs,
			section_post_data => 1,
			role => 1,
			binary_upgrade => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'Always trigger on partition is altered' => {
		regexp => qr/^
			\QALTER TABLE dump_test_second_schema.measurement_y2006m5 ENABLE ALWAYS TRIGGER test_trigger;\E
			/xm,
		like => {
			%full_runs,
			section_post_data => 1,
			role => 1,
			binary_upgrade => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	# We should never see the creation of a trigger on a partition
	'Disabled trigger on partition is not created' => {
		regexp => qr/CREATE TRIGGER test_trigger.*ON dump_test_second_schema/,
		like => {},
	},

	# Triggers on partitions should not be dropped individually
	'Triggers on partitions are not dropped' => {
		regexp => qr/DROP TRIGGER test_trigger.*ON dump_test_second_schema/,
		like => {}
	},

	'CREATE TABLE test_third_table_generated_cols' => {
		create_order => 6,
		create_sql => 'CREATE TABLE dump_test.test_third_table (
						f1 int, junk int,
						g1 int generated always as (f1 * 2) stored,
						"F3" int,
						g2 int generated always as ("F3" * 3) stored
					);
					ALTER TABLE dump_test.test_third_table DROP COLUMN junk;',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_third_table (\E\n
			\s+\Qf1 integer,\E\n
			\s+\Qg1 integer GENERATED ALWAYS AS ((f1 * 2)) STORED,\E\n
			\s+\Q"F3" integer,\E\n
			\s+\Qg2 integer GENERATED ALWAYS AS (("F3" * 3)) STORED\E\n
			\);\n
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_fourth_table_zero_col' => {
		create_order => 6,
		create_sql => 'CREATE TABLE dump_test.test_fourth_table (
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_fourth_table (\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_fifth_table' => {
		create_order => 53,
		create_sql => 'CREATE TABLE dump_test.test_fifth_table (
							col1 integer,
							col2 boolean,
							col3 boolean,
							col4 bit(5),
							col5 float8
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_fifth_table (\E
			\n\s+\Qcol1 integer,\E
			\n\s+\Qcol2 boolean,\E
			\n\s+\Qcol3 boolean,\E
			\n\s+\Qcol4 bit(5),\E
			\n\s+\Qcol5 double precision\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_sixth_table' => {
		create_order => 6,
		create_sql => 'CREATE TABLE dump_test.test_sixth_table (
						   col1 int,
						   col2 text,
						   col3 bytea
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_sixth_table (\E
			\n\s+\Qcol1 integer,\E
			\n\s+\Qcol2 text,\E
			\n\s+\Qcol3 bytea\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_seventh_table' => {
		create_order => 6,
		create_sql => 'CREATE TABLE dump_test.test_seventh_table (
						   col1 int,
						   col2 text,
						   col3 bytea
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_seventh_table (\E
			\n\s+\Qcol1 integer,\E
			\n\s+\Qcol2 text,\E
			\n\s+\Qcol3 bytea\E
			\n\);
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_table_identity' => {
		create_order => 3,
		create_sql => 'CREATE TABLE dump_test.test_table_identity (
						   col1 int generated always as identity primary key,
						   col2 text
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_identity (\E\n
			\s+\Qcol1 integer NOT NULL,\E\n
			\s+\Qcol2 text\E\n
			\);
			.*
			\QALTER TABLE dump_test.test_table_identity ALTER COLUMN col1 ADD GENERATED ALWAYS AS IDENTITY (\E\n
			\s+\QSEQUENCE NAME dump_test.test_table_identity_col1_seq\E\n
			\s+\QSTART WITH 1\E\n
			\s+\QINCREMENT BY 1\E\n
			\s+\QNO MINVALUE\E\n
			\s+\QNO MAXVALUE\E\n
			\s+\QCACHE 1\E\n
			\);
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_table_generated' => {
		create_order => 3,
		create_sql => 'CREATE TABLE dump_test.test_table_generated (
						   col1 int primary key,
						   col2 int generated always as (col1 * 2) stored,
						   col3 int generated always as (col1 * 3) virtual
					   );',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_generated (\E\n
			\s+\Qcol1 integer NOT NULL,\E\n
			\s+\Qcol2 integer GENERATED ALWAYS AS ((col1 * 2)) STORED,\E\n
			\s+\Qcol3 integer GENERATED ALWAYS AS ((col1 * 3))\E\n
			\);
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_table_generated_child1 (without local columns)' => {
		create_order => 4,
		create_sql => 'CREATE TABLE dump_test.test_table_generated_child1 ()
						 INHERITS (dump_test.test_table_generated);',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_generated_child1 (\E\n
			\)\n
			\QINHERITS (dump_test.test_table_generated);\E\n
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER TABLE test_table_generated_child1' => {
		regexp =>
		  qr/^\QALTER TABLE ONLY dump_test.test_table_generated_child1 ALTER COLUMN col2 \E/m,

		# should not get emitted
		like => {},
	},

	'CREATE TABLE test_table_generated_child2 (with local columns)' => {
		create_order => 4,
		create_sql => 'CREATE TABLE dump_test.test_table_generated_child2 (
						   col1 int,
						   col2 int
						 ) INHERITS (dump_test.test_table_generated);',
		regexp => qr/^
			\QCREATE TABLE dump_test.test_table_generated_child2 (\E\n
			\s+\Qcol1 integer,\E\n
			\s+\Qcol2 integer\E\n
			\)\n
			\QINHERITS (dump_test.test_table_generated);\E\n
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE table_with_stats' => {
		create_order => 98,
		create_sql => 'CREATE TABLE dump_test.table_index_stats (
						   col1 int,
						   col2 int,
						   col3 int);
						 CREATE INDEX index_with_stats
						  ON dump_test.table_index_stats
						  ((col1 + 1), col1, (col2 + 1), (col3 + 1));
						 ALTER INDEX dump_test.index_with_stats
						   ALTER COLUMN 1 SET STATISTICS 400;
						 ALTER INDEX dump_test.index_with_stats
						   ALTER COLUMN 3 SET STATISTICS 500;',
		regexp => qr/^
			\QALTER INDEX dump_test.index_with_stats ALTER COLUMN 1 SET STATISTICS 400;\E\n
			\QALTER INDEX dump_test.index_with_stats ALTER COLUMN 3 SET STATISTICS 500;\E\n
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_inheritance_parent' => {
		create_order => 90,
		create_sql => 'CREATE TABLE dump_test.test_inheritance_parent (
						   col1 int NOT NULL,
						   col2 int CHECK (col2 >= 42)
						 );',
		regexp => qr/^
		\QCREATE TABLE dump_test.test_inheritance_parent (\E\n
		\s+\Qcol1 integer NOT NULL,\E\n
		\s+\Qcol2 integer,\E\n
		\s+\QCONSTRAINT test_inheritance_parent_col2_check CHECK ((col2 >= 42))\E\n
		\Q);\E\n
		/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE TABLE test_inheritance_child' => {
		create_order => 91,
		create_sql => 'CREATE TABLE dump_test.test_inheritance_child (
						    col1 int NOT NULL,
						    CONSTRAINT test_inheritance_child CHECK (col2 >= 142857)
						) INHERITS (dump_test.test_inheritance_parent);',
		regexp => qr/^
		\QCREATE TABLE dump_test.test_inheritance_child (\E\n
		\s+\Qcol1 integer NOT NULL,\E\n
		\s+\QCONSTRAINT test_inheritance_child CHECK ((col2 >= 142857))\E\n
		\)\n
		\QINHERITS (dump_test.test_inheritance_parent);\E\n
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE STATISTICS extended_stats_no_options' => {
		create_order => 97,
		create_sql => 'CREATE STATISTICS dump_test.test_ext_stats_no_options
							ON col1, col2 FROM dump_test.test_table',
		regexp => qr/^
			\QCREATE STATISTICS dump_test.test_ext_stats_no_options ON col1, col2 FROM dump_test.test_table;\E
		    /xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE STATISTICS extended_stats_options' => {
		create_order => 97,
		create_sql => 'CREATE STATISTICS dump_test.test_ext_stats_opts
							(ndistinct) ON col1, col2 FROM dump_test.test_fifth_table',
		regexp => qr/^
			\QCREATE STATISTICS dump_test.test_ext_stats_opts (ndistinct) ON col1, col2 FROM dump_test.test_fifth_table;\E
		    /xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER STATISTICS extended_stats_options' => {
		create_order => 98,
		create_sql =>
		  'ALTER STATISTICS dump_test.test_ext_stats_opts SET STATISTICS 1000',
		regexp => qr/^
			\QALTER STATISTICS dump_test.test_ext_stats_opts SET STATISTICS 1000;\E
		    /xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE STATISTICS extended_stats_expression' => {
		create_order => 99,
		create_sql => 'CREATE STATISTICS dump_test.test_ext_stats_expr
							ON (2 * col1) FROM dump_test.test_fifth_table',
		regexp => qr/^
			\QCREATE STATISTICS dump_test.test_ext_stats_expr ON (2 * col1) FROM dump_test.test_fifth_table;\E
		    /xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE SEQUENCE test_table_col1_seq' => {
		regexp => qr/^
			\QCREATE SEQUENCE dump_test.test_table_col1_seq\E
			\n\s+\QAS integer\E
			\n\s+\QSTART WITH 1\E
			\n\s+\QINCREMENT BY 1\E
			\n\s+\QNO MINVALUE\E
			\n\s+\QNO MAXVALUE\E
			\n\s+\QCACHE 1;\E
			/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE INDEX ON ONLY measurement' => {
		create_order => 92,
		create_sql =>
		  'CREATE INDEX ON dump_test.measurement (city_id, logdate);',
		regexp => qr/^
		\QCREATE INDEX measurement_city_id_logdate_idx ON ONLY dump_test.measurement USING\E
		/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_post_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_measurement => 1,
		},
	},

	'ALTER TABLE measurement PRIMARY KEY' => {
		catch_all => 'CREATE ... commands',
		create_order => 93,
		create_sql =>
		  'ALTER TABLE dump_test.measurement ADD PRIMARY KEY (city_id, logdate);',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.measurement\E \n^\s+
			\QADD CONSTRAINT measurement_pkey PRIMARY KEY (city_id, logdate);\E
		/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			section_post_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_measurement => 1,
		},
	},

	'CREATE INDEX ... ON measurement_y2006_m2' => {
		regexp => qr/^
		\QCREATE INDEX measurement_y2006m2_city_id_logdate_idx ON dump_test_second_schema.measurement_y2006m2 \E
		/xm,
		like => {
			%full_runs,
			role => 1,
			section_post_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'ALTER INDEX ... ATTACH PARTITION' => {
		regexp => qr/^
		\QALTER INDEX dump_test.measurement_city_id_logdate_idx ATTACH PARTITION dump_test_second_schema.measurement_y2006m2_city_id_logdate_idx\E
		/xm,
		like => {
			%full_runs,
			role => 1,
			section_post_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'ALTER INDEX ... ATTACH PARTITION (primary key)' => {
		catch_all => 'CREATE ... commands',
		regexp => qr/^
		\QALTER INDEX dump_test.measurement_pkey ATTACH PARTITION dump_test_second_schema.measurement_y2006m2_pkey\E
		/xm,
		like => {
			%full_runs,
			role => 1,
			section_post_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_measurement => 1,
		},
	},

	'CREATE VIEW test_view' => {
		create_order => 61,
		create_sql => 'CREATE VIEW dump_test.test_view
		                   WITH (check_option = \'local\', security_barrier = true) AS
		                   SELECT col1 FROM dump_test.test_table;',
		regexp => qr/^
			\QCREATE VIEW dump_test.test_view WITH (security_barrier='true') AS\E
			\n\s+\QSELECT col1\E
			\n\s+\QFROM dump_test.test_table\E
			\n\s+\QWITH LOCAL CHECK OPTION;\E/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	'ALTER VIEW test_view SET DEFAULT' => {
		create_order => 62,
		create_sql =>
		  'ALTER VIEW dump_test.test_view ALTER COLUMN col1 SET DEFAULT 1;',
		regexp => qr/^
			\QALTER TABLE ONLY dump_test.test_view ALTER COLUMN col1 SET DEFAULT 1;\E/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			only_dump_measurement => 1,
		},
	},

	# FIXME
	'DROP SCHEMA public (for testing without public schema)' => {
		database => 'regress_pg_dump_test',
		create_order => 100,
		create_sql => 'DROP SCHEMA public;',
		regexp => qr/^DROP SCHEMA public;/m,
		like => {},
	},

	'DROP SCHEMA public' => {
		regexp => qr/^DROP SCHEMA public;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'DROP SCHEMA IF EXISTS public' => {
		regexp => qr/^DROP SCHEMA IF EXISTS public;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'DROP EXTENSION plpgsql' => {
		regexp => qr/^DROP EXTENSION plpgsql;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'DROP FUNCTION dump_test.pltestlang_call_handler()' => {
		regexp => qr/^DROP FUNCTION dump_test\.pltestlang_call_handler\(\);/m,
		like => { clean => 1, },
	},

	'DROP LANGUAGE pltestlang' => {
		regexp => qr/^DROP PROCEDURAL LANGUAGE pltestlang;/m,
		like => { clean => 1, },
	},

	'DROP SCHEMA dump_test' => {
		regexp => qr/^DROP SCHEMA dump_test;/m,
		like => { clean => 1, },
	},

	'DROP SCHEMA dump_test_second_schema' => {
		regexp => qr/^DROP SCHEMA dump_test_second_schema;/m,
		like => { clean => 1, },
	},

	'DROP TABLE test_table' => {
		regexp => qr/^DROP TABLE dump_test\.test_table;/m,
		like => { clean => 1, },
	},

	'DROP TABLE fk_reference_test_table' => {
		regexp => qr/^DROP TABLE dump_test\.fk_reference_test_table;/m,
		like => { clean => 1, },
	},

	'DROP TABLE test_second_table' => {
		regexp => qr/^DROP TABLE dump_test\.test_second_table;/m,
		like => { clean => 1, },
	},

	'DROP EXTENSION IF EXISTS plpgsql' => {
		regexp => qr/^DROP EXTENSION IF EXISTS plpgsql;/m,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'DROP FUNCTION IF EXISTS dump_test.pltestlang_call_handler()' => {
		regexp => qr/^
			\QDROP FUNCTION IF EXISTS dump_test.pltestlang_call_handler();\E
			/xm,
		like => { clean_if_exists => 1, },
	},

	'DROP LANGUAGE IF EXISTS pltestlang' => {
		regexp => qr/^DROP PROCEDURAL LANGUAGE IF EXISTS pltestlang;/m,
		like => { clean_if_exists => 1, },
	},

	'DROP SCHEMA IF EXISTS dump_test' => {
		regexp => qr/^DROP SCHEMA IF EXISTS dump_test;/m,
		like => { clean_if_exists => 1, },
	},

	'DROP SCHEMA IF EXISTS dump_test_second_schema' => {
		regexp => qr/^DROP SCHEMA IF EXISTS dump_test_second_schema;/m,
		like => { clean_if_exists => 1, },
	},

	'DROP TABLE IF EXISTS test_table' => {
		regexp => qr/^DROP TABLE IF EXISTS dump_test\.test_table;/m,
		like => { clean_if_exists => 1, },
	},

	'DROP TABLE IF EXISTS test_second_table' => {
		regexp => qr/^DROP TABLE IF EXISTS dump_test\.test_second_table;/m,
		like => { clean_if_exists => 1, },
	},

	'DROP ROLE regress_dump_test_role' => {
		regexp => qr/^
			\QDROP ROLE regress_dump_test_role;\E
			/xm,
		like => { pg_dumpall_globals_clean => 1, },
	},

	'DROP ROLE pg_' => {
		regexp => qr/^
			\QDROP ROLE pg_\E.+;
			/xm,

		# this shouldn't ever get emitted anywhere
		like => {},
	},

	'GRANT USAGE ON SCHEMA dump_test_second_schema' => {
		create_order => 10,
		create_sql => 'GRANT USAGE ON SCHEMA dump_test_second_schema
						   TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT USAGE ON SCHEMA dump_test_second_schema TO regress_dump_test_role;\E
			/xm,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
		},
		unlike => { no_privs => 1, },
	},

	'GRANT USAGE ON FOREIGN DATA WRAPPER dummy' => {
		create_order => 85,
		create_sql => 'GRANT USAGE ON FOREIGN DATA WRAPPER dummy
						   TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON FOREIGN DATA WRAPPER dummy TO regress_dump_test_role;\E
			/xm,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'GRANT USAGE ON FOREIGN SERVER s1' => {
		create_order => 85,
		create_sql => 'GRANT USAGE ON FOREIGN SERVER s1
						   TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON FOREIGN SERVER s1 TO regress_dump_test_role;\E
			/xm,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'GRANT USAGE ON DOMAIN dump_test.us_postal_code' => {
		create_order => 72,
		create_sql =>
		  'GRANT USAGE ON DOMAIN dump_test.us_postal_code TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON TYPE dump_test.us_postal_code TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT USAGE ON TYPE dump_test.int42' => {
		create_order => 87,
		create_sql =>
		  'GRANT USAGE ON TYPE dump_test.int42 TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON TYPE dump_test.int42 TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT USAGE ON TYPE dump_test.planets - ENUM' => {
		create_order => 66,
		create_sql =>
		  'GRANT USAGE ON TYPE dump_test.planets TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON TYPE dump_test.planets TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT USAGE ON TYPE dump_test.textrange - RANGE' => {
		create_order => 67,
		create_sql =>
		  'GRANT USAGE ON TYPE dump_test.textrange TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON TYPE dump_test.textrange TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT CREATE ON DATABASE dump_test' => {
		create_order => 48,
		create_sql =>
		  'GRANT CREATE ON DATABASE dump_test TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT CREATE ON DATABASE dump_test TO regress_dump_test_role;\E
			/xm,
		like => { pg_dumpall_dbprivs => 1, },
	},

	'GRANT SELECT ON TABLE test_table' => {
		create_order => 5,
		create_sql => 'GRANT SELECT ON TABLE dump_test.test_table
						   TO regress_dump_test_role;',
		regexp =>
		  qr/^\QGRANT SELECT ON TABLE dump_test.test_table TO regress_dump_test_role;\E/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			exclude_test_table => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT SELECT ON TABLE measurement' => {
		create_order => 91,
		create_sql => 'GRANT SELECT ON TABLE dump_test.measurement
						   TO regress_dump_test_role;
					   GRANT SELECT(city_id) ON TABLE dump_test.measurement
						   TO "regress_quoted  \"" role";',
		regexp =>
		  qr/^\QGRANT SELECT ON TABLE dump_test.measurement TO regress_dump_test_role;\E\n.*
			 ^\QGRANT SELECT(city_id) ON TABLE dump_test.measurement TO "regress_quoted  \"" role";\E/xms,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			exclude_measurement => 1,
		},
	},

	'GRANT SELECT ON TABLE measurement_y2006m2' => {
		create_order => 94,
		create_sql => 'GRANT SELECT ON TABLE
						   dump_test_second_schema.measurement_y2006m2,
						   dump_test_second_schema.measurement_y2006m3,
						   dump_test_second_schema.measurement_y2006m4,
						   dump_test_second_schema.measurement_y2006m5
						   TO regress_dump_test_role;',
		regexp =>
		  qr/^\QGRANT SELECT ON TABLE dump_test_second_schema.measurement_y2006m2 TO regress_dump_test_role;\E/m,
		like => {
			%full_runs,
			role => 1,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => {
			no_privs => 1,
			exclude_measurement => 1,
		},
	},

	'GRANT ALL ON LARGE OBJECT ...' => {
		create_order => 60,
		create_sql => 'DO $$
						 DECLARE myoid oid;
						 BEGIN
							SELECT loid FROM pg_largeobject INTO myoid;
							EXECUTE \'GRANT ALL ON LARGE OBJECT \' || myoid || \' TO regress_dump_test_role;\';
						 END;
						 $$;',
		regexp => qr/^
			\QGRANT ALL ON LARGE OBJECT \E[0-9]+\Q TO regress_dump_test_role;\E
			/xm,
		like => {
			%full_runs,
			column_inserts => 1,
			data_only => 1,
			inserts => 1,
			no_schema => 1,
			section_data => 1,
			test_schema_plus_large_objects => 1,
		},
		unlike => {
			binary_upgrade => 1,
			no_large_objects => 1,
			no_privs => 1,
			schema_only => 1,
		},
	},

	'GRANT INSERT(col1) ON TABLE test_second_table' => {
		create_order => 8,
		create_sql =>
		  'GRANT INSERT (col1) ON TABLE dump_test.test_second_table
						   TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT INSERT(col1) ON TABLE dump_test.test_second_table TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT SELECT ON PROPERTY GRAPH propgraph' => {
		create_order => 21,
		create_sql =>
		  'GRANT SELECT ON PROPERTY GRAPH dump_test.propgraph TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON PROPERTY GRAPH dump_test.propgraph TO regress_dump_test_role;\E
			/xm,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_pre_data => 1, },
		unlike => {
			exclude_dump_test_schema => 1,
			no_privs => 1,
			only_dump_measurement => 1,
		},
	},

	'GRANT EXECUTE ON FUNCTION pg_sleep() TO regress_dump_test_role' => {
		create_order => 16,
		create_sql => 'GRANT EXECUTE ON FUNCTION pg_sleep(float8)
						   TO regress_dump_test_role;',
		regexp => qr/^
			\QGRANT ALL ON FUNCTION pg_catalog.pg_sleep(double precision) TO regress_dump_test_role;\E
			/xm,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'GRANT SELECT (proname ...) ON TABLE pg_proc TO public' => {
		create_order => 46,
		create_sql => 'GRANT SELECT (
						   tableoid,
						   oid,
						   proname,
						   pronamespace,
						   proowner,
						   prolang,
						   procost,
						   prorows,
						   provariadic,
						   prosupport,
						   prokind,
						   prosecdef,
						   proleakproof,
						   proisstrict,
						   proretset,
						   provolatile,
						   proparallel,
						   pronargs,
						   pronargdefaults,
						   prorettype,
						   proargtypes,
						   proallargtypes,
						   proargmodes,
						   proargnames,
						   proargdefaults,
						   protrftypes,
						   prosrc,
						   probin,
						   proconfig,
						   proacl
						) ON TABLE pg_proc TO public;',
		regexp => qr/
		\QGRANT SELECT(tableoid) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(oid) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proname) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(pronamespace) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proowner) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prolang) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(procost) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prorows) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(provariadic) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prosupport) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prokind) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prosecdef) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proleakproof) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proisstrict) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proretset) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(provolatile) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proparallel) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(pronargs) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(pronargdefaults) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prorettype) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proargtypes) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proallargtypes) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proargmodes) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proargnames) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proargdefaults) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(protrftypes) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(prosrc) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(probin) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proconfig) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E\n.*
		\QGRANT SELECT(proacl) ON TABLE pg_catalog.pg_proc TO PUBLIC;\E/xms,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'GRANT USAGE ON SCHEMA public TO public' => {
		regexp => qr/^
			\Q--\E\n\n
			\QGRANT USAGE ON SCHEMA public TO PUBLIC;\E
			/xm,

		# this shouldn't ever get emitted anymore
		like => {},
	},

	'REFRESH MATERIALIZED VIEW matview' => {
		regexp => qr/^\QREFRESH MATERIALIZED VIEW dump_test.matview;\E/m,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	'REFRESH MATERIALIZED VIEW matview_second' => {
		regexp => qr/^
			\QREFRESH MATERIALIZED VIEW dump_test.matview;\E
			\n.*
			\QREFRESH MATERIALIZED VIEW dump_test.matview_second;\E
			/xms,
		like =>
		  { %full_runs, %dump_test_schema_runs, section_post_data => 1, },
		unlike => {
			binary_upgrade => 1,
			exclude_dump_test_schema => 1,
			schema_only => 1,
			only_dump_measurement => 1,
		},
	},

	# FIXME
	'REFRESH MATERIALIZED VIEW matview_third' => {
		regexp => qr/^
			\QREFRESH MATERIALIZED VIEW dump_test.matview_third;\E
			/xms,
		like => {},
	},

	# FIXME
	'REFRESH MATERIALIZED VIEW matview_fourth' => {
		regexp => qr/^
			\QREFRESH MATERIALIZED VIEW dump_test.matview_fourth;\E
			/xms,
		like => {},
	},

	'REVOKE CONNECT ON DATABASE dump_test FROM public' => {
		create_order => 49,
		create_sql => 'REVOKE CONNECT ON DATABASE dump_test FROM public;',
		regexp => qr/^
			\QREVOKE CONNECT,TEMPORARY ON DATABASE dump_test FROM PUBLIC;\E\n
			\QGRANT TEMPORARY ON DATABASE dump_test TO PUBLIC;\E\n
			\QGRANT CREATE ON DATABASE dump_test TO regress_dump_test_role;\E
			/xm,
		like => { pg_dumpall_dbprivs => 1, },
	},

	'REVOKE EXECUTE ON FUNCTION pg_sleep() FROM public' => {
		create_order => 15,
		create_sql => 'REVOKE EXECUTE ON FUNCTION pg_sleep(float8)
						   FROM public;',
		regexp => qr/^
			\QREVOKE ALL ON FUNCTION pg_catalog.pg_sleep(double precision) FROM PUBLIC;\E
			/xm,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	# With the exception of the public schema, we don't dump ownership changes
	# for objects originating at initdb.  Hence, any GRANT or REVOKE affecting
	# owner privileges for those objects should reference the bootstrap
	# superuser, not the dump-time owner.
	'REVOKE EXECUTE ON FUNCTION pg_stat_reset FROM regress_dump_test_role' =>
	  {
		create_order => 15,
		create_sql => '
			ALTER FUNCTION pg_stat_reset OWNER TO regress_dump_test_role;
			REVOKE EXECUTE ON FUNCTION pg_stat_reset
			  FROM regress_dump_test_role;',
		regexp => qr/^[^-].*pg_stat_reset.* regress_dump_test_role/m,

		# this shouldn't ever get emitted
		like => {},
	  },

	'REVOKE SELECT ON TABLE pg_proc FROM public' => {
		create_order => 45,
		create_sql => 'REVOKE SELECT ON TABLE pg_proc FROM public;',
		regexp =>
		  qr/^\QREVOKE SELECT ON TABLE pg_catalog.pg_proc FROM PUBLIC;\E/m,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'REVOKE ALL ON SCHEMA public' => {
		create_order => 16,
		create_sql =>
		  'REVOKE ALL ON SCHEMA public FROM "regress_quoted  \"" role";',
		regexp =>
		  qr/^REVOKE ALL ON SCHEMA public FROM "regress_quoted  \\"" role";/m,
		like => { %full_runs, section_pre_data => 1, },
		unlike => { no_privs => 1, },
	},

	'REVOKE USAGE ON LANGUAGE plpgsql FROM public' => {
		create_order => 16,
		create_sql => 'REVOKE USAGE ON LANGUAGE plpgsql FROM public;',
		regexp => qr/^REVOKE ALL ON LANGUAGE plpgsql FROM PUBLIC;/m,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			only_dump_test_table => 1,
			role => 1,
			section_pre_data => 1,
			only_dump_measurement => 1,
		},
		unlike => { no_privs => 1, },
	},


	'CREATE ACCESS METHOD regress_test_table_am' => {
		create_order => 11,
		create_sql =>
		  'CREATE ACCESS METHOD regress_table_am TYPE TABLE HANDLER heap_tableam_handler;',
		regexp => qr/^
			\QCREATE ACCESS METHOD regress_table_am TYPE TABLE HANDLER heap_tableam_handler;\E
			\n/xm,
		like => {
			%full_runs, section_pre_data => 1,
		},
	},

	# It's a bit tricky to ensure that the proper SET of default table
	# AM occurs. To achieve that we create a table with the standard
	# AM, test AM, standard AM. That guarantees that there needs to be
	# a SET interspersed.  Then use a regex that prevents interspersed
	# SET ...; statements, followed by the expected CREATE TABLE. Not
	# pretty, but seems hard to do better in this framework.
	'CREATE TABLE regress_pg_dump_table_am' => {
		create_order => 12,
		create_sql => '
			CREATE TABLE dump_test.regress_pg_dump_table_am_0() USING heap;
			CREATE TABLE dump_test.regress_pg_dump_table_am_1 (col1 int) USING regress_table_am;
			CREATE TABLE dump_test.regress_pg_dump_table_am_2() USING heap;',
		regexp => qr/^
			\QSET default_table_access_method = regress_table_am;\E
			(\n(?!SET[^;]+;)[^\n]*)*
			\n\QCREATE TABLE dump_test.regress_pg_dump_table_am_1 (\E
			\n\s+\Qcol1 integer\E
			\n\);/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_table_access_method => 1,
			only_dump_measurement => 1,
		},
	},

	'CREATE MATERIALIZED VIEW regress_pg_dump_matview_am' => {
		create_order => 13,
		create_sql => '
			CREATE MATERIALIZED VIEW dump_test.regress_pg_dump_matview_am_0 USING heap AS SELECT 1;
			CREATE MATERIALIZED VIEW dump_test.regress_pg_dump_matview_am_1
				USING regress_table_am AS SELECT count(*) FROM pg_class;
			CREATE MATERIALIZED VIEW dump_test.regress_pg_dump_matview_am_2 USING heap AS SELECT 1;',
		regexp => qr/^
			\QSET default_table_access_method = regress_table_am;\E
			(\n(?!SET[^;]+;)[^\n]*)*
			\QCREATE MATERIALIZED VIEW dump_test.regress_pg_dump_matview_am_1 AS\E
			\n\s+\QSELECT count(*) AS count\E
			\n\s+\QFROM pg_class\E
			\n\s+\QWITH NO DATA;\E\n/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_table_access_method => 1,
			only_dump_measurement => 1,
		},
	},

	#
	# TABLE and MATVIEW stats will end up in SECTION_DATA.
	# INDEX stats (expression columns only) will end up in SECTION_POST_DATA.
	#
	'statistics_import' => {
		create_sql => '
			CREATE TABLE dump_test.has_stats
			AS SELECT g.g AS x, g.g / 2 AS y FROM generate_series(1,100) AS g(g);
			CREATE MATERIALIZED VIEW dump_test.has_stats_mv AS SELECT * FROM dump_test.has_stats;
			CREATE INDEX """dump_test""\'s post-data index" ON dump_test.has_stats(x, (x - 1));
			ANALYZE dump_test.has_stats, dump_test.has_stats_mv;',
		regexp => qr/^
			\QSELECT * FROM pg_catalog.pg_restore_relation_stats(\E\s+
			'version',\s'\d+'::integer,\s+
			'schemaname',\s'dump_test',\s+
			'relname',\s'"dump_test"''s\ post-data\ index',\s+
			'relpages',\s'\d+'::integer,\s+
			'reltuples',\s'\d+'::real,\s+
			'relallvisible',\s'\d+'::integer,\s+
			'relallfrozen',\s'\d+'::integer\s+
			\);\s+
			\QSELECT * FROM pg_catalog.pg_restore_attribute_stats(\E\s+
			'version',\s'\d+'::integer,\s+
			'schemaname',\s'dump_test',\s+
			'relname',\s'"dump_test"''s\ post-data\ index',\s+
			'attnum',\s'2'::smallint,\s+
			'inherited',\s'f'::boolean,\s+
			'null_frac',\s'0'::real,\s+
			'avg_width',\s'4'::integer,\s+
			'n_distinct',\s'-1'::real,\s+
			'histogram_bounds',\s'\{[0-9,]+\}'::text,\s+
			'correlation',\s'1'::real\s+
			\);/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			no_data_no_schema => 1,
			no_schema => 1,
			section_post_data => 1,
			statistics_only => 1,
			statistics_only_with_schema => 1,
			statistics_only_with_index => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_statistics => 1,
			only_dump_measurement => 1,
			schema_only => 1,
		},
	},

	#
	# EXTENDED stats will end up in SECTION_POST_DATA.
	#
	'extended_statistics_import' => {
		create_sql => '
			CREATE TABLE dump_test.has_ext_stats
			AS SELECT g.g AS x, g.g / 2 AS y FROM generate_series(1,100) AS g(g);
			CREATE STATISTICS dump_test.es1 ON x, (y % 2) FROM dump_test.has_ext_stats;
			ANALYZE dump_test.has_ext_stats;',
		regexp => qr/^
			\QSELECT * FROM pg_catalog.pg_restore_extended_stats(\E\s+/xm,
		like => {
			%full_runs,
			%dump_test_schema_runs,
			no_data_no_schema => 1,
			no_schema => 1,
			section_post_data => 1,
			statistics_only => 1,
			statistics_only_with_schema => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_statistics => 1,
			only_dump_measurement => 1,
			schema_only => 1,
		},
	},

	#
	# While attribute stats (aka pg_statistic stats) only appear for tables
	# that have been analyzed, all tables will have relation stats because
	# those come from pg_class.
	#
	'relstats_on_unanalyzed_tables' => {
		regexp => qr/pg_catalog.pg_restore_relation_stats/,

		like => {
			%full_runs,
			%dump_test_schema_runs,
			no_data_no_schema => 1,
			no_schema => 1,
			only_dump_test_table => 1,
			role => 1,
			role_parallel => 1,
			section_data => 1,
			section_post_data => 1,
			statistics_only => 1,
			statistics_only_with_schema => 1,
			statistics_only_with_index => 1,
			statistics_only_with_table => 1,
		},
		unlike => {
			no_statistics => 1,
			schema_only => 1,
		},
	},

	# CREATE TABLE with partitioned table and various AMs.  One
	# partition uses the same default as the parent, and a second
	# uses its own AM.
	'CREATE TABLE regress_pg_dump_table_part' => {
		create_order => 19,
		create_sql => '
			CREATE TABLE dump_test.regress_pg_dump_table_am_parent (id int) PARTITION BY LIST (id);
			ALTER TABLE dump_test.regress_pg_dump_table_am_parent SET ACCESS METHOD regress_table_am;
			CREATE TABLE dump_test.regress_pg_dump_table_am_child_1
			  PARTITION OF dump_test.regress_pg_dump_table_am_parent FOR VALUES IN (1);
			CREATE TABLE dump_test.regress_pg_dump_table_am_child_2
			  PARTITION OF dump_test.regress_pg_dump_table_am_parent FOR VALUES IN (2) USING heap;',
		regexp => qr/^
			\n\QCREATE TABLE dump_test.regress_pg_dump_table_am_parent (\E
			(\n(?!SET[^;]+;)[^\n]*)*
			\QALTER TABLE dump_test.regress_pg_dump_table_am_parent SET ACCESS METHOD regress_table_am;\E
			(.*\n)*
			\QSET default_table_access_method = regress_table_am;\E
			(\n(?!SET[^;]+;)[^\n]*)*
			\n\QCREATE TABLE dump_test.regress_pg_dump_table_am_child_1 (\E
			(.*\n)*
			\QSET default_table_access_method = heap;\E
			(\n(?!SET[^;]+;)[^\n]*)*
			\n\QCREATE TABLE dump_test.regress_pg_dump_table_am_child_2 (\E
			(.*\n)*/xm,
		like => {
			%full_runs, %dump_test_schema_runs, section_pre_data => 1,
		},
		unlike => {
			exclude_dump_test_schema => 1,
			no_table_access_method => 1,
			only_dump_measurement => 1,
		},
	});

#########################################
# Create a PG instance to test actually dumping from

my $node = PostgreSQL::Test::Cluster->new('main');
$node->init;
$node->start;

my $port = $node->port;

# We need to see if this system supports CREATE COLLATION or not
# If it doesn't then we will skip all the COLLATION-related tests.
my $collation_support = 0;
my $collation_check_stderr;
$node->psql(
	'postgres',
	"CREATE COLLATION testing FROM \"C\"; DROP COLLATION testing;",
	on_error_stop => 0,
	stderr => \$collation_check_stderr);

if ($collation_check_stderr !~ /ERROR: /)
{
	$collation_support = 1;
}

# ICU doesn't work with some encodings
my $encoding = $node->safe_psql('postgres', 'show server_encoding');
$supports_icu = 0 if $encoding eq 'SQL_ASCII';

# Create additional databases for mutations of schema public
$node->psql('postgres', 'create database regress_pg_dump_test;');
$node->psql('postgres', 'create database regress_public_owner;');

#########################################
# Set up schemas, tables, etc, to be dumped.

# Build up the create statements
my %create_sql = ();

foreach my $test (
	sort {
		if ($tests{$a}->{create_order} and $tests{$b}->{create_order})
		{
			$tests{$a}->{create_order} <=> $tests{$b}->{create_order};
		}
		elsif ($tests{$a}->{create_order})
		{
			-1;
		}
		elsif ($tests{$b}->{create_order})
		{
			1;
		}
		else
		{
			0;
		}
	} keys %tests)
{
	my $test_db = 'postgres';

	if (defined($tests{$test}->{database}))
	{
		$test_db = $tests{$test}->{database};
	}

	if (defined($tests{$test}->{icu}))
	{
		$tests{$test}->{collation} = 1;
	}

	if ($tests{$test}->{create_sql})
	{

		# Skip any collation-related commands if there is no collation support
		if (!$collation_support && defined($tests{$test}->{collation}))
		{
			next;
		}

		# Skip any icu-related collation commands if build was without icu
		if (!$supports_icu && defined($tests{$test}->{icu}))
		{
			next;
		}

		# Normalize command ending: strip all line endings, add
		# semicolon if missing, add two newlines.
		my $create_sql = $tests{$test}->{create_sql};
		chomp $create_sql;
		$create_sql .= ';' unless substr($create_sql, -1) eq ';';
		$create_sql{$test_db} .= $create_sql . "\n\n";
	}
}

# Send the combined set of commands to psql
foreach my $db (sort keys %create_sql)
{
	$node->safe_psql($db, $create_sql{$db});
}

#########################################
# Test connecting to a non-existent database

command_fails_like(
	[ 'pg_dump', '--port' => $port, 'qqq' ],
	qr/pg_dump: error: connection to server .* failed: FATAL:  database "qqq" does not exist/,
	'connecting to a non-existent database');

#########################################
# Test connecting to an invalid database

$node->command_fails_like(
	[ 'pg_dump', '--dbname' => 'regression_invalid' ],
	qr/pg_dump: error: connection to server .* failed: FATAL:  cannot connect to invalid database "regression_invalid"/,
	'connecting to an invalid database');

#########################################
# Test connecting with an unprivileged user

command_fails_like(
	[ 'pg_dump', '--port' => $port, '--role' => 'regress_dump_test_role' ],
	qr/\Qpg_dump: error: query failed: ERROR:  permission denied for\E/,
	'connecting with an unprivileged user');

#########################################
# Test dumping a non-existent schema, table, and patterns with --strict-names

command_fails_like(
	[ 'pg_dump', '--port' => $port, '--schema' => 'nonexistent' ],
	qr/\Qpg_dump: error: no matching schemas were found\E/,
	'dumping a non-existent schema');

command_fails_like(
	[ 'pg_dump', '--port' => $port, '--table' => 'nonexistent' ],
	qr/\Qpg_dump: error: no matching tables were found\E/,
	'dumping a non-existent table');

command_fails_like(
	[
		'pg_dump',
		'--port' => $port,
		'--strict-names',
		'--schema' => 'nonexistent*'
	],
	qr/\Qpg_dump: error: no matching schemas were found for pattern\E/,
	'no matching schemas');

command_fails_like(
	[
		'pg_dump',
		'--port' => $port,
		'--strict-names',
		'--schema-only',
		'--statistics',
	],
	qr/\Qpg_dump: error: options --statistics and -s\/--schema-only cannot be used together\E/,
	'cannot use --statistics and --schema-only together');

command_fails_like(
	[
		'pg_dump',
		'--port' => $port,
		'--strict-names',
		'--table' => 'nonexistent*'
	],
	qr/\Qpg_dump: error: no matching tables were found for pattern\E/,
	'no matching tables');

#########################################
# Test invalid multipart database names

$node->command_fails_like(
	[ 'pg_dumpall', '--exclude-database' => '.' ],
	qr/pg_dumpall: error: improper qualified name \(too many dotted names\): \./,
	'pg_dumpall: option --exclude-database rejects multipart pattern "."');

$node->command_fails_like(
	[ 'pg_dumpall', '--exclude-database' => 'myhost.mydb' ],
	qr/pg_dumpall: error: improper qualified name \(too many dotted names\): myhost\.mydb/,
	'pg_dumpall: option --exclude-database rejects multipart database names');

##############################################################
# Test dumping pg_catalog (for research -- cannot be reloaded)

$node->command_ok(
	[
		'pg_dump',
		'--port' => $port,
		'--schema' => 'pg_catalog',
		'--file' => "$tempdir/pgdump_pgcatalog.dmp"
	],
	'pg_dump: option -n pg_catalog');

#########################################
# Test valid database exclusion patterns

$node->command_ok(
	[
		'pg_dumpall',
		'--port' => $port,
		'--exclude-database' => '"myhost.mydb"',
		'--file' => "$tempdir/pgdumpall.dmp"
	],
	'pg_dumpall: option --exclude-database handles database names with embedded dots'
);

#########################################
# Test invalid multipart schema names

$node->command_fails_like(
	[ 'pg_dump', '--schema' => 'myhost.mydb.myschema' ],
	qr/pg_dump: error: improper qualified name \(too many dotted names\): myhost\.mydb\.myschema/,
	'pg_dump: option --schema rejects three-part schema names');

$node->command_fails_like(
	[ 'pg_dump', '--schema' => 'otherdb.myschema' ],
	qr/pg_dump: error: cross-database references are not implemented: otherdb\.myschema/,
	'pg_dump: option --schema rejects cross-database multipart schema names');

$node->command_fails_like(
	[ 'pg_dump', '--schema' => '.' ],
	qr/pg_dump: error: cross-database references are not implemented: \./,
	'pg_dump: option --schema rejects degenerate two-part schema name: "."');

$node->command_fails_like(
	[ 'pg_dump', '--schema' => '"some.other.db".myschema' ],
	qr/pg_dump: error: cross-database references are not implemented: "some\.other\.db"\.myschema/,
	'pg_dump: option --schema rejects cross-database multipart schema names with embedded dots'
);

$node->command_fails_like(
	[ 'pg_dump', '--schema' => '..' ],
	qr/pg_dump: error: improper qualified name \(too many dotted names\): \.\./,
	'pg_dump: option --schema rejects degenerate three-part schema name: ".."'
);

#########################################
# Test invalid multipart relation names

$node->command_fails_like(
	[ 'pg_dump', '--table' => 'myhost.mydb.myschema.mytable' ],
	qr/pg_dump: error: improper relation name \(too many dotted names\): myhost\.mydb\.myschema\.mytable/,
	'pg_dump: option --table rejects four-part table names');

$node->command_fails_like(
	[ 'pg_dump', '--table' => 'otherdb.pg_catalog.pg_class' ],
	qr/pg_dump: error: cross-database references are not implemented: otherdb\.pg_catalog\.pg_class/,
	'pg_dump: option --table rejects cross-database three part table names');

command_fails_like(
	[
		'pg_dump',
		'--port' => $port,
		'--table' => '"some.other.db".pg_catalog.pg_class'
	],
	qr/pg_dump: error: cross-database references are not implemented: "some\.other\.db"\.pg_catalog\.pg_class/,
	'pg_dump: option --table rejects cross-database three part table names with embedded dots'
);

#########################################
# Run all runs

foreach my $run (sort keys %pgdump_runs)
{
	my $test_key = $run;
	my $run_db = 'postgres';

	$node->command_ok(\@{ $pgdump_runs{$run}->{dump_cmd} },
		"$run: pg_dump runs");

	if ($pgdump_runs{$run}->{glob_patterns})
	{
		my $glob_patterns = $pgdump_runs{$run}->{glob_patterns};
		foreach my $glob_pattern (@{$glob_patterns})
		{
			my @glob_output = glob($glob_pattern);
			my $ok = 0;
			# certainly found some files if glob() returned multiple matches
			$ok = 1 if (scalar(@glob_output) > 1);
			# if just one match, we need to check if it's real
			$ok = 1 if (scalar(@glob_output) == 1 && -f $glob_output[0]);
			is($ok, 1, "$run: glob check for $glob_pattern");
		}
	}

	if ($pgdump_runs{$run}->{command_like})
	{
		my $cmd_like = $pgdump_runs{$run}->{command_like};
		$node->command_like(
			\@{ $cmd_like->{command} },
			$cmd_like->{expected},
			"$run: " . $cmd_like->{name});
	}

	if ($pgdump_runs{$run}->{restore_cmd})
	{
		$node->command_ok(\@{ $pgdump_runs{$run}->{restore_cmd} },
			"$run: pg_restore runs");
	}

	if ($pgdump_runs{$run}->{test_key})
	{
		$test_key = $pgdump_runs{$run}->{test_key};
	}

	my $output_file = slurp_file("$tempdir/${run}.sql");

	#########################################
	# Run all tests where this run is included
	# as either a 'like' or 'unlike' test.

	foreach my $test (sort keys %tests)
	{
		my $test_db = 'postgres';

		if (defined($pgdump_runs{$run}->{database}))
		{
			$run_db = $pgdump_runs{$run}->{database};
		}

		if (defined($tests{$test}->{database}))
		{
			$test_db = $tests{$test}->{database};
		}

		# Check for proper test definitions
		#
		# Either "all_runs" should be set or there should be a "like" list,
		# even if it is empty.  (This makes the test more self-documenting.)
		if (   !defined($tests{$test}->{all_runs})
			&& !defined($tests{$test}->{like}))
		{
			die "missing \"like\" in test \"$test\"";
		}
		# Check for useless entries in "unlike" list.  Runs that are
		# not listed in "like" don't need to be excluded in "unlike".
		if ($tests{$test}->{unlike}->{$test_key}
			&& !defined($tests{$test}->{like}->{$test_key}))
		{
			die "useless \"unlike\" entry \"$test_key\" in test \"$test\"";
		}

		# Skip any collation-related commands if there is no collation support
		if (!$collation_support && defined($tests{$test}->{collation}))
		{
			next;
		}

		# Skip any icu-related collation commands if build was without icu
		if (!$supports_icu && defined($tests{$test}->{icu}))
		{
			next;
		}

		if ($run_db ne $test_db)
		{
			next;
		}

		# Run the test if all_runs is set or if listed as a like, unless it is
		# specifically noted as an unlike (generally due to an explicit
		# exclusion or similar).
		if (($tests{$test}->{like}->{$test_key} || $tests{$test}->{all_runs})
			&& !defined($tests{$test}->{unlike}->{$test_key}))
		{
			if (!like(
					$output_file, $tests{$test}->{regexp},
					"$run: should dump $test"))
			{
				diag("Review $run results in $tempdir");
			}
		}
		else
		{
			if (!unlike(
					$output_file, $tests{$test}->{regexp},
					"$run: should not dump $test"))
			{
				diag("Review $run results in $tempdir");
			}
		}
	}
}

#########################################
# Stop the database instance, which will be removed at the end of the tests.

$node->stop('fast');

done_testing();