/
githubmirror
/
postgres
Обзор
Документация
Войти
/
githubmirror
/
postgres
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
src/backend/commands/vacuumparallel.c
1 375 строк
43 KB
Daniel Gustafsson
pgindent fix for
a84eca6
29 июл 2026, 23:02
29 июл 2026, 23:02
b43e8f4
Код
Авторство
О чём код?
/*------------------------------------------------------------------------- * * vacuumparallel.c * Support routines for parallel vacuum and autovacuum execution. In the * comments below, the word "vacuum" will refer to both vacuum and * autovacuum. * * This file contains routines that are intended to support setting up, using, * and tearing down a ParallelVacuumState. * * In a parallel vacuum, we perform both index bulk deletion and index cleanup * with parallel worker processes. Individual indexes are processed by one * vacuum process. ParallelVacuumState contains shared information as well as * the memory space for storing dead items allocated in the DSA area. We * launch parallel worker processes at the start of parallel index * bulk-deletion and index cleanup and once all indexes are processed, the * parallel worker processes exit. Each time we process indexes in parallel, * the parallel context is re-initialized so that the same DSM can be used for * multiple passes of index bulk-deletion and index cleanup. * * For parallel autovacuum, we need to propagate cost-based vacuum delay * parameters from the leader to its workers, as the leader's parameters can * change even while processing a table (e.g., due to a config reload). * The PVSharedCostParams struct manages these parameters using a * generation counter. Each parallel worker polls this shared state and * refreshes its local delay parameters whenever a change is detected. * * Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * IDENTIFICATION * src/backend/commands/vacuumparallel.c * *------------------------------------------------------------------------- */ #include "postgres.h" #include "access/amapi.h" #include "access/table.h" #include "access/xact.h" #include "commands/progress.h" #include "commands/vacuum.h" #include "executor/instrument.h" #include "optimizer/paths.h" #include "pgstat.h" #include "storage/bufmgr.h" #include "storage/proc.h" #include "tcop/tcopprot.h" #include "utils/lsyscache.h" #include "utils/rel.h" /* * DSM keys for parallel vacuum. Unlike other parallel execution code, since * we don't need to worry about DSM keys conflicting with plan_node_id we can * use small integers. */ #define PARALLEL_VACUUM_KEY_SHARED 1 #define PARALLEL_VACUUM_KEY_QUERY_TEXT 2 #define PARALLEL_VACUUM_KEY_BUFFER_USAGE 3 #define PARALLEL_VACUUM_KEY_WAL_USAGE 4 #define PARALLEL_VACUUM_KEY_INDEX_STATS 5 /* * Struct for cost-based vacuum delay related parameters to share among an * autovacuum worker and its parallel vacuum workers. */ typedef struct PVSharedCostParams { /* * The generation counter is incremented by the leader process each time * it updates the shared cost-based vacuum delay parameters. Parallel * vacuum workers compare it with their local generation, * shared_params_generation_local, to detect whether they need to refresh * their local parameters. The generation starts from 1 so that a freshly * started worker (whose local copy is 0) will always load the initial * parameters on its first check. */ pg_atomic_uint32 generation; slock_t mutex; /* protects all fields below */ /* Parameters to share with parallel workers */ double cost_delay; int cost_limit; int cost_page_dirty; int cost_page_hit; int cost_page_miss; } PVSharedCostParams; /* * Shared information among parallel workers. So this is allocated in the DSM * segment. */ typedef struct PVShared { /* * Target table relid, log level (for messages about parallel workers * launched during VACUUM VERBOSE) and query ID. These fields are not * modified during the parallel vacuum. */ Oid relid; int elevel; int64 queryid; /* * Fields for both index vacuum and cleanup. * * reltuples is the total number of input heap tuples. We set either old * live tuples in the index vacuum case or the new live tuples in the * index cleanup case. * * estimated_count is true if reltuples is an estimated value. (Note that * reltuples could be -1 in this case, indicating we have no idea.) */ double reltuples; bool estimated_count; /* * In single process vacuum we could consume more memory during index * vacuuming or cleanup apart from the memory for heap scanning. In * parallel vacuum, since individual vacuum workers can consume memory * equal to maintenance_work_mem, the new maintenance_work_mem for each * worker is set such that the parallel operation doesn't consume more * memory than single process vacuum. */ int maintenance_work_mem_worker; /* * The number of buffers each worker's Buffer Access Strategy ring should * contain. */ int ring_nbuffers; /* * Shared vacuum cost balance. During parallel vacuum, * VacuumSharedCostBalance points to this value and it accumulates the * balance of each parallel vacuum worker. */ pg_atomic_uint32 cost_balance; /* * Number of active parallel workers. This is used for computing the * minimum threshold of the vacuum cost balance before a worker sleeps for * cost-based delay. */ pg_atomic_uint32 active_nworkers; /* Counter for vacuuming and cleanup */ pg_atomic_uint32 idx; /* DSA handle where the TidStore lives */ dsa_handle dead_items_dsa_handle; /* DSA pointer to the shared TidStore */ dsa_pointer dead_items_handle; /* Statistics of shared dead items */ VacDeadItemsInfo dead_items_info; /* * If 'true' then we are running parallel autovacuum. Otherwise, we are * running parallel maintenance VACUUM. */ bool is_autovacuum; /* * Cost-based vacuum delay parameters shared between the autovacuum leader * and its parallel workers. */ PVSharedCostParams cost_params; } PVShared; /* Status used during parallel index vacuum or cleanup */ typedef enum PVIndVacStatus { PARALLEL_INDVAC_STATUS_INITIAL = 0, PARALLEL_INDVAC_STATUS_NEED_BULKDELETE, PARALLEL_INDVAC_STATUS_NEED_CLEANUP, PARALLEL_INDVAC_STATUS_COMPLETED, } PVIndVacStatus; /* * Struct for index vacuum statistics of an index that is used for parallel vacuum. * This includes the status of parallel index vacuum as well as index statistics. */ typedef struct PVIndStats { /* * The following two fields are set by leader process before executing * parallel index vacuum or parallel index cleanup. These fields are not * fixed for the entire VACUUM operation. They are only fixed for an * individual parallel index vacuum and cleanup. * * parallel_workers_can_process is true if both leader and worker can * process the index, otherwise only leader can process it. */ PVIndVacStatus status; bool parallel_workers_can_process; /* * Individual worker or leader stores the result of index vacuum or * cleanup. */ bool istat_updated; /* are the stats updated? */ IndexBulkDeleteResult istat; } PVIndStats; /* * Struct for maintaining a parallel vacuum state. typedef appears in vacuum.h. */ struct ParallelVacuumState { /* NULL for worker processes */ ParallelContext *pcxt; /* Parent Heap Relation */ Relation heaprel; /* Target indexes */ Relation *indrels; int nindexes; /* Shared information among parallel vacuum workers */ PVShared *shared; /* * Shared index statistics among parallel vacuum workers. The array * element is allocated for every index, even those indexes where parallel * index vacuuming is unsafe or not worthwhile (e.g., * will_parallel_vacuum[] is false). During parallel vacuum, * IndexBulkDeleteResult of each index is kept in DSM and is copied into * local memory at the end of parallel vacuum. */ PVIndStats *indstats; /* Shared dead items space among parallel vacuum workers */ TidStore *dead_items; /* Points to buffer usage area in DSM */ BufferUsage *buffer_usage; /* Points to WAL usage area in DSM */ WalUsage *wal_usage; /* * False if the index is totally unsuitable target for all parallel * processing. For example, the index could be < * min_parallel_index_scan_size cutoff. */ bool *will_parallel_vacuum; /* * The number of indexes that support parallel index bulk-deletion and * parallel index cleanup respectively. */ int nindexes_parallel_bulkdel; int nindexes_parallel_cleanup; int nindexes_parallel_condcleanup; /* Buffer access strategy used by leader process */ BufferAccessStrategy bstrategy; /* * Error reporting state. The error callback is set only for workers * processes during parallel index vacuum. */ char *relnamespace; char *relname; char *indname; PVIndVacStatus status; }; static PVSharedCostParams *pv_shared_cost_params = NULL; /* * Worker-local copy of the last cost-parameter generation this worker has * applied. Initialized to 0; since the leader initializes the shared * generation counter to 1, the first call to * parallel_vacuum_update_shared_delay_params() will always detect a * mismatch and read the initial parameters from shared memory. */ static uint32 shared_params_generation_local = 0; static int parallel_vacuum_compute_workers(Relation *indrels, int nindexes, int nrequested, bool *will_parallel_vacuum); static void parallel_vacuum_process_all_indexes(ParallelVacuumState *pvs, int num_index_scans, bool vacuum, PVWorkerStats *wstats); static void parallel_vacuum_process_safe_indexes(ParallelVacuumState *pvs); static void parallel_vacuum_process_unsafe_indexes(ParallelVacuumState *pvs); static void parallel_vacuum_process_one_index(ParallelVacuumState *pvs, Relation indrel, PVIndStats *indstats); static bool parallel_vacuum_index_is_parallel_safe(Relation indrel, int num_index_scans, bool vacuum); static void parallel_vacuum_error_callback(void *arg); static inline void parallel_vacuum_set_cost_parameters(PVSharedCostParams *params); static void parallel_vacuum_dsm_detach(dsm_segment *seg, Datum arg); /* * Try to enter parallel mode and create a parallel context. Then initialize * shared memory state. * * On success, return parallel vacuum state. Otherwise return NULL. */ ParallelVacuumState * parallel_vacuum_init(Relation rel, Relation *indrels, int nindexes, int nrequested_workers, int vac_work_mem, int elevel, BufferAccessStrategy bstrategy) { ParallelVacuumState *pvs; ParallelContext *pcxt; PVShared *shared; TidStore *dead_items; PVIndStats *indstats; BufferUsage *buffer_usage; WalUsage *wal_usage; bool *will_parallel_vacuum; Size est_indstats_len; Size est_shared_len; int nindexes_mwm = 0; int parallel_workers = 0; int querylen; /* * A parallel vacuum must be requested and there must be indexes on the * relation */ Assert(nrequested_workers >= 0); Assert(nindexes > 0); /* * Compute the number of parallel vacuum workers to launch */ will_parallel_vacuum = palloc0_array(bool, nindexes); parallel_workers = parallel_vacuum_compute_workers(indrels, nindexes, nrequested_workers, will_parallel_vacuum); if (parallel_workers <= 0) { /* Can't perform vacuum in parallel -- return NULL */ pfree(will_parallel_vacuum); return NULL; } pvs = palloc0_object(ParallelVacuumState); pvs->indrels = indrels; pvs->nindexes = nindexes; pvs->will_parallel_vacuum = will_parallel_vacuum; pvs->bstrategy = bstrategy; pvs->heaprel = rel; EnterParallelMode(); pcxt = CreateParallelContext("postgres", "parallel_vacuum_main", parallel_workers); Assert(pcxt->nworkers > 0); pvs->pcxt = pcxt; /* Estimate size for index vacuum stats -- PARALLEL_VACUUM_KEY_INDEX_STATS */ est_indstats_len = mul_size(sizeof(PVIndStats), nindexes); shm_toc_estimate_chunk(&pcxt->estimator, est_indstats_len); shm_toc_estimate_keys(&pcxt->estimator, 1); /* Estimate size for shared information -- PARALLEL_VACUUM_KEY_SHARED */ est_shared_len = sizeof(PVShared); shm_toc_estimate_chunk(&pcxt->estimator, est_shared_len); shm_toc_estimate_keys(&pcxt->estimator, 1); /* * Estimate space for BufferUsage and WalUsage -- * PARALLEL_VACUUM_KEY_BUFFER_USAGE and PARALLEL_VACUUM_KEY_WAL_USAGE. * * If there are no extensions loaded that care, we could skip this. We * have no way of knowing whether anyone's looking at pgBufferUsage or * pgWalUsage, so do it unconditionally. */ shm_toc_estimate_chunk(&pcxt->estimator, mul_size(sizeof(BufferUsage), pcxt->nworkers)); shm_toc_estimate_keys(&pcxt->estimator, 1); shm_toc_estimate_chunk(&pcxt->estimator, mul_size(sizeof(WalUsage), pcxt->nworkers)); shm_toc_estimate_keys(&pcxt->estimator, 1); /* Finally, estimate PARALLEL_VACUUM_KEY_QUERY_TEXT space */ if (debug_query_string) { querylen = strlen(debug_query_string); shm_toc_estimate_chunk(&pcxt->estimator, querylen + 1); shm_toc_estimate_keys(&pcxt->estimator, 1); } else querylen = 0; /* keep compiler quiet */ InitializeParallelDSM(pcxt); /* Prepare index vacuum stats */ indstats = (PVIndStats *) shm_toc_allocate(pcxt->toc, est_indstats_len); MemSet(indstats, 0, est_indstats_len); for (int i = 0; i < nindexes; i++) { Relation indrel = indrels[i]; uint8 vacoptions = indrel->rd_indam->amparallelvacuumoptions; /* * Cleanup option should be either disabled, always performing in * parallel or conditionally performing in parallel. */ Assert(((vacoptions & VACUUM_OPTION_PARALLEL_CLEANUP) == 0) || ((vacoptions & VACUUM_OPTION_PARALLEL_COND_CLEANUP) == 0)); Assert(vacoptions <= VACUUM_OPTION_MAX_VALID_VALUE); if (!will_parallel_vacuum[i]) continue; if (indrel->rd_indam->amusemaintenanceworkmem) nindexes_mwm++; /* * Remember the number of indexes that support parallel operation for * each phase. */ if ((vacoptions & VACUUM_OPTION_PARALLEL_BULKDEL) != 0) pvs->nindexes_parallel_bulkdel++; if ((vacoptions & VACUUM_OPTION_PARALLEL_CLEANUP) != 0) pvs->nindexes_parallel_cleanup++; if ((vacoptions & VACUUM_OPTION_PARALLEL_COND_CLEANUP) != 0) pvs->nindexes_parallel_condcleanup++; } shm_toc_insert(pcxt->toc, PARALLEL_VACUUM_KEY_INDEX_STATS, indstats); pvs->indstats = indstats; /* Prepare shared information */ shared = (PVShared *) shm_toc_allocate(pcxt->toc, est_shared_len); MemSet(shared, 0, est_shared_len); shared->relid = RelationGetRelid(rel); shared->elevel = elevel; shared->queryid = pgstat_get_my_query_id(); shared->maintenance_work_mem_worker = (nindexes_mwm > 0) ? vac_work_mem / Min(parallel_workers, nindexes_mwm) : vac_work_mem; shared->dead_items_info.max_bytes = vac_work_mem * (size_t) 1024; /* Prepare DSA space for dead items */ dead_items = TidStoreCreateShared(shared->dead_items_info.max_bytes, LWTRANCHE_PARALLEL_VACUUM_DSA); pvs->dead_items = dead_items; shared->dead_items_handle = TidStoreGetHandle(dead_items); shared->dead_items_dsa_handle = dsa_get_handle(TidStoreGetDSA(dead_items)); /* Use the same buffer size for all workers */ shared->ring_nbuffers = GetAccessStrategyBufferCount(bstrategy); pg_atomic_init_u32(&(shared->cost_balance), 0); pg_atomic_init_u32(&(shared->active_nworkers), 0); pg_atomic_init_u32(&(shared->idx), 0); shared->is_autovacuum = AmAutoVacuumWorkerProcess(); /* * Initialize shared cost-based vacuum delay parameters if it's for * autovacuum. */ if (shared->is_autovacuum) { parallel_vacuum_set_cost_parameters(&shared->cost_params); pg_atomic_init_u32(&shared->cost_params.generation, 1); SpinLockInit(&shared->cost_params.mutex); pv_shared_cost_params = &(shared->cost_params); on_dsm_detach(pcxt->seg, parallel_vacuum_dsm_detach, (Datum) 0); } shm_toc_insert(pcxt->toc, PARALLEL_VACUUM_KEY_SHARED, shared); pvs->shared = shared; /* * Allocate space for each worker's BufferUsage and WalUsage; no need to * initialize */ buffer_usage = shm_toc_allocate(pcxt->toc, mul_size(sizeof(BufferUsage), pcxt->nworkers)); shm_toc_insert(pcxt->toc, PARALLEL_VACUUM_KEY_BUFFER_USAGE, buffer_usage); pvs->buffer_usage = buffer_usage; wal_usage = shm_toc_allocate(pcxt->toc, mul_size(sizeof(WalUsage), pcxt->nworkers)); shm_toc_insert(pcxt->toc, PARALLEL_VACUUM_KEY_WAL_USAGE, wal_usage); pvs->wal_usage = wal_usage; /* Store query string for workers */ if (debug_query_string) { char *sharedquery; sharedquery = (char *) shm_toc_allocate(pcxt->toc, querylen + 1); memcpy(sharedquery, debug_query_string, querylen + 1); sharedquery[querylen] = '\0'; shm_toc_insert(pcxt->toc, PARALLEL_VACUUM_KEY_QUERY_TEXT, sharedquery); } /* Success -- return parallel vacuum state */ return pvs; } /* * Destroy the parallel context, and end parallel mode. * * Since writes are not allowed during parallel mode, copy the * updated index statistics from DSM into local memory and then later use that * to update the index statistics. One might think that we can exit from * parallel mode, update the index statistics and then destroy parallel * context, but that won't be safe (see ExitParallelMode). */ void parallel_vacuum_end(ParallelVacuumState *pvs, IndexBulkDeleteResult **istats) { Assert(!IsParallelWorker()); /* Copy the updated statistics */ for (int i = 0; i < pvs->nindexes; i++) { PVIndStats *indstats = &(pvs->indstats[i]); if (indstats->istat_updated) { istats[i] = palloc0_object(IndexBulkDeleteResult); memcpy(istats[i], &indstats->istat, sizeof(IndexBulkDeleteResult)); } else istats[i] = NULL; } TidStoreDestroy(pvs->dead_items); DestroyParallelContext(pvs->pcxt); ExitParallelMode(); if (AmAutoVacuumWorkerProcess()) pv_shared_cost_params = NULL; pfree(pvs->will_parallel_vacuum); pfree(pvs); } /* * DSM detach callback. This is invoked when an autovacuum worker detaches * from the DSM segment holding PVShared. It ensures to reset the local pointer * to the shared state even if parallel vacuum raises an error and doesn't * call parallel_vacuum_end(). */ static void parallel_vacuum_dsm_detach(dsm_segment *seg, Datum arg) { Assert(AmAutoVacuumWorkerProcess()); pv_shared_cost_params = NULL; } /* * Returns the dead items space and dead items information. */ TidStore * parallel_vacuum_get_dead_items(ParallelVacuumState *pvs, VacDeadItemsInfo **dead_items_info_p) { *dead_items_info_p = &(pvs->shared->dead_items_info); return pvs->dead_items; } /* Forget all items in dead_items */ void parallel_vacuum_reset_dead_items(ParallelVacuumState *pvs) { VacDeadItemsInfo *dead_items_info = &(pvs->shared->dead_items_info); /* * Free the current tidstore and return allocated DSA segments to the * operating system. Then we recreate the tidstore with the same max_bytes * limitation we just used. */ TidStoreDestroy(pvs->dead_items); pvs->dead_items = TidStoreCreateShared(dead_items_info->max_bytes, LWTRANCHE_PARALLEL_VACUUM_DSA); /* Update the DSA pointer for dead_items to the new one */ pvs->shared->dead_items_dsa_handle = dsa_get_handle(TidStoreGetDSA(pvs->dead_items)); pvs->shared->dead_items_handle = TidStoreGetHandle(pvs->dead_items); /* Reset the counter */ dead_items_info->num_items = 0; } /* * Do parallel index bulk-deletion with parallel workers. */ void parallel_vacuum_bulkdel_all_indexes(ParallelVacuumState *pvs, long num_table_tuples, int num_index_scans, PVWorkerStats *wstats) { Assert(!IsParallelWorker()); /* * We can only provide an approximate value of num_heap_tuples, at least * for now. */ pvs->shared->reltuples = num_table_tuples; pvs->shared->estimated_count = true; parallel_vacuum_process_all_indexes(pvs, num_index_scans, true, wstats); } /* * Do parallel index cleanup with parallel workers. */ void parallel_vacuum_cleanup_all_indexes(ParallelVacuumState *pvs, long num_table_tuples, int num_index_scans, bool estimated_count, PVWorkerStats *wstats) { Assert(!IsParallelWorker()); /* * We can provide a better estimate of total number of surviving tuples * (we assume indexes are more interested in that than in the number of * nominally live tuples). */ pvs->shared->reltuples = num_table_tuples; pvs->shared->estimated_count = estimated_count; parallel_vacuum_process_all_indexes(pvs, num_index_scans, false, wstats); } /* * Fill in the given structure with cost-based vacuum delay parameter values. */ static inline void parallel_vacuum_set_cost_parameters(PVSharedCostParams *params) { params->cost_delay = vacuum_cost_delay; params->cost_limit = vacuum_cost_limit; params->cost_page_dirty = VacuumCostPageDirty; params->cost_page_hit = VacuumCostPageHit; params->cost_page_miss = VacuumCostPageMiss; } /* * Updates the cost-based vacuum delay parameters for parallel autovacuum * workers. * * For non-autovacuum parallel workers, this function will have no effect. */ void parallel_vacuum_update_shared_delay_params(void) { uint32 params_generation; Assert(IsParallelWorker()); /* Quick return if the worker is not running for the autovacuum */ if (pv_shared_cost_params == NULL) return; params_generation = pg_atomic_read_u32(&pv_shared_cost_params->generation); Assert(shared_params_generation_local <= params_generation); /* Return if parameters had not changed in the leader */ if (params_generation == shared_params_generation_local) return; SpinLockAcquire(&pv_shared_cost_params->mutex); VacuumCostDelay = pv_shared_cost_params->cost_delay; VacuumCostLimit = pv_shared_cost_params->cost_limit; VacuumCostPageDirty = pv_shared_cost_params->cost_page_dirty; VacuumCostPageHit = pv_shared_cost_params->cost_page_hit; VacuumCostPageMiss = pv_shared_cost_params->cost_page_miss; SpinLockRelease(&pv_shared_cost_params->mutex); VacuumUpdateCosts(); shared_params_generation_local = params_generation; elog(DEBUG2, "parallel autovacuum worker updated cost params: cost_limit=%d, cost_delay=%g, cost_page_miss=%d, cost_page_dirty=%d, cost_page_hit=%d", vacuum_cost_limit, vacuum_cost_delay, VacuumCostPageMiss, VacuumCostPageDirty, VacuumCostPageHit); } /* * Store the cost-based vacuum delay parameters in the shared memory so that * parallel vacuum workers can consume them (see * parallel_vacuum_update_shared_delay_params()). */ void parallel_vacuum_propagate_shared_delay_params(void) { Assert(AmAutoVacuumWorkerProcess()); /* * Quick return if the leader process is not sharing the delay parameters. */ if (pv_shared_cost_params == NULL) return; /* * Check if any delay parameters have changed. We can read them without * locks as only the leader can modify them. */ if (vacuum_cost_delay == pv_shared_cost_params->cost_delay && vacuum_cost_limit == pv_shared_cost_params->cost_limit && VacuumCostPageDirty == pv_shared_cost_params->cost_page_dirty && VacuumCostPageHit == pv_shared_cost_params->cost_page_hit && VacuumCostPageMiss == pv_shared_cost_params->cost_page_miss) return; /* Update the shared delay parameters */ SpinLockAcquire(&pv_shared_cost_params->mutex); parallel_vacuum_set_cost_parameters(pv_shared_cost_params); SpinLockRelease(&pv_shared_cost_params->mutex); /* * Increment the generation of the parameters, i.e. let parallel workers * know that they should re-read shared cost params. */ pg_atomic_fetch_add_u32(&pv_shared_cost_params->generation, 1); } /* * Compute the number of parallel worker processes to request. Both index * vacuum and index cleanup can be executed with parallel workers. * The index is eligible for parallel vacuum iff its size is greater than * min_parallel_index_scan_size as invoking workers for very small indexes * can hurt performance. * * nrequested is the number of parallel workers that user requested. If * nrequested is 0, we compute the parallel degree based on nindexes, that is * the number of indexes that support parallel vacuum. This function also * sets will_parallel_vacuum to remember indexes that participate in parallel * vacuum. */ static int parallel_vacuum_compute_workers(Relation *indrels, int nindexes, int nrequested, bool *will_parallel_vacuum) { int nindexes_parallel = 0; int nindexes_parallel_bulkdel = 0; int nindexes_parallel_cleanup = 0; int parallel_workers; int max_workers; max_workers = AmAutoVacuumWorkerProcess() ? autovacuum_max_parallel_workers : max_parallel_maintenance_workers; /* * We don't allow performing parallel operation in standalone backend or * when parallelism is disabled. */ if (!IsUnderPostmaster || max_workers == 0) return 0; /* * Compute the number of indexes that can participate in parallel vacuum. */ for (int i = 0; i < nindexes; i++) { Relation indrel = indrels[i]; uint8 vacoptions = indrel->rd_indam->amparallelvacuumoptions; /* Skip index that is not a suitable target for parallel index vacuum */ if (vacoptions == VACUUM_OPTION_NO_PARALLEL || RelationGetNumberOfBlocks(indrel) < min_parallel_index_scan_size) continue; will_parallel_vacuum[i] = true; if ((vacoptions & VACUUM_OPTION_PARALLEL_BULKDEL) != 0) nindexes_parallel_bulkdel++; if (((vacoptions & VACUUM_OPTION_PARALLEL_CLEANUP) != 0) || ((vacoptions & VACUUM_OPTION_PARALLEL_COND_CLEANUP) != 0)) nindexes_parallel_cleanup++; } nindexes_parallel = Max(nindexes_parallel_bulkdel, nindexes_parallel_cleanup); /* The leader process takes one index */ nindexes_parallel--; /* No index supports parallel vacuum */ if (nindexes_parallel <= 0) return 0; /* Compute the parallel degree */ parallel_workers = (nrequested > 0) ? Min(nrequested, nindexes_parallel) : nindexes_parallel; /* Cap by GUC variable */ parallel_workers = Min(parallel_workers, max_workers); return parallel_workers; } /* * Perform index vacuum or index cleanup with parallel workers. This function * must be used by the parallel vacuum leader process. * * If wstats is not NULL, the parallel worker statistics are updated. */ static void parallel_vacuum_process_all_indexes(ParallelVacuumState *pvs, int num_index_scans, bool vacuum, PVWorkerStats *wstats) { int nworkers; PVIndVacStatus new_status; Assert(!IsParallelWorker()); if (vacuum) { new_status = PARALLEL_INDVAC_STATUS_NEED_BULKDELETE; /* Determine the number of parallel workers to launch */ nworkers = pvs->nindexes_parallel_bulkdel; } else { new_status = PARALLEL_INDVAC_STATUS_NEED_CLEANUP; /* Determine the number of parallel workers to launch */ nworkers = pvs->nindexes_parallel_cleanup; /* Add conditionally parallel-aware indexes if in the first time call */ if (num_index_scans == 0) nworkers += pvs->nindexes_parallel_condcleanup; } /* The leader process will participate */ nworkers--; /* * It is possible that parallel context is initialized with fewer workers * than the number of indexes that need a separate worker in the current * phase, so we need to consider it. See * parallel_vacuum_compute_workers(). */ nworkers = Min(nworkers, pvs->pcxt->nworkers); /* Update the statistics, if we asked to */ if (wstats != NULL && nworkers > 0) wstats->nplanned += nworkers; /* * Set index vacuum status and mark whether parallel vacuum worker can * process it. */ for (int i = 0; i < pvs->nindexes; i++) { PVIndStats *indstats = &(pvs->indstats[i]); Assert(indstats->status == PARALLEL_INDVAC_STATUS_INITIAL); indstats->status = new_status; indstats->parallel_workers_can_process = (pvs->will_parallel_vacuum[i] && parallel_vacuum_index_is_parallel_safe(pvs->indrels[i], num_index_scans, vacuum)); } /* Reset the parallel index processing and progress counters */ pg_atomic_write_u32(&(pvs->shared->idx), 0); /* Setup the shared cost-based vacuum delay and launch workers */ if (nworkers > 0) { /* Reinitialize parallel context to relaunch parallel workers */ if (num_index_scans > 0) ReinitializeParallelDSM(pvs->pcxt); /* * Set up shared cost balance and the number of active workers for * vacuum delay. We need to do this before launching workers as * otherwise, they might not see the updated values for these * parameters. */ pg_atomic_write_u32(&(pvs->shared->cost_balance), VacuumCostBalance); pg_atomic_write_u32(&(pvs->shared->active_nworkers), 0); /* * The number of workers can vary between bulkdelete and cleanup * phase. */ ReinitializeParallelWorkers(pvs->pcxt, nworkers); LaunchParallelWorkers(pvs->pcxt); if (pvs->pcxt->nworkers_launched > 0) { /* * Reset the local cost values for leader backend as we have * already accumulated the remaining balance of heap. */ VacuumCostBalance = 0; VacuumCostBalanceLocal = 0; /* Enable shared cost balance for leader backend */ VacuumSharedCostBalance = &(pvs->shared->cost_balance); VacuumActiveNWorkers = &(pvs->shared->active_nworkers); /* Update the statistics, if we asked to */ if (wstats != NULL) wstats->nlaunched += pvs->pcxt->nworkers_launched; } if (vacuum) ereport(pvs->shared->elevel, (errmsg(ngettext("launched %d parallel vacuum worker for index vacuuming (planned: %d)", "launched %d parallel vacuum workers for index vacuuming (planned: %d)", pvs->pcxt->nworkers_launched), pvs->pcxt->nworkers_launched, nworkers))); else ereport(pvs->shared->elevel, (errmsg(ngettext("launched %d parallel vacuum worker for index cleanup (planned: %d)", "launched %d parallel vacuum workers for index cleanup (planned: %d)", pvs->pcxt->nworkers_launched), pvs->pcxt->nworkers_launched, nworkers))); } /* Vacuum the indexes that can be processed by only leader process */ parallel_vacuum_process_unsafe_indexes(pvs); /* * Join as a parallel worker. The leader vacuums alone processes all * parallel-safe indexes in the case where no workers are launched. */ parallel_vacuum_process_safe_indexes(pvs); /* * Next, accumulate buffer and WAL usage. (This must wait for the workers * to finish, or we might get incomplete data.) */ if (nworkers > 0) { /* Wait for all vacuum workers to finish */ WaitForParallelWorkersToFinish(pvs->pcxt); for (int i = 0; i < pvs->pcxt->nworkers_launched; i++) InstrAccumParallelQuery(&pvs->buffer_usage[i], &pvs->wal_usage[i]); } /* * Reset all index status back to initial (while checking that we have * vacuumed all indexes). */ for (int i = 0; i < pvs->nindexes; i++) { PVIndStats *indstats = &(pvs->indstats[i]); if (indstats->status != PARALLEL_INDVAC_STATUS_COMPLETED) elog(ERROR, "parallel index vacuum on index \"%s\" is not completed", RelationGetRelationName(pvs->indrels[i])); indstats->status = PARALLEL_INDVAC_STATUS_INITIAL; } /* * Carry the shared balance value to heap scan and disable shared costing */ if (VacuumSharedCostBalance) { VacuumCostBalance = pg_atomic_read_u32(VacuumSharedCostBalance); VacuumSharedCostBalance = NULL; VacuumActiveNWorkers = NULL; } } /* * Index vacuum/cleanup routine used by the leader process and parallel * vacuum worker processes to vacuum the indexes in parallel. */ static void parallel_vacuum_process_safe_indexes(ParallelVacuumState *pvs) { /* * Increment the active worker count if we are able to launch any worker. */ if (VacuumActiveNWorkers) pg_atomic_add_fetch_u32(VacuumActiveNWorkers, 1); /* Loop until all indexes are vacuumed */ for (;;) { int idx; PVIndStats *indstats; /* Get an index number to process */ idx = pg_atomic_fetch_add_u32(&(pvs->shared->idx), 1); /* Done for all indexes? */ if (idx >= pvs->nindexes) break; indstats = &(pvs->indstats[idx]); /* * Skip vacuuming index that is unsafe for workers or has an * unsuitable target for parallel index vacuum (this is vacuumed in * parallel_vacuum_process_unsafe_indexes() by the leader). */ if (!indstats->parallel_workers_can_process) continue; /* Do vacuum or cleanup of the index */ parallel_vacuum_process_one_index(pvs, pvs->indrels[idx], indstats); } /* * We have completed the index vacuum so decrement the active worker * count. */ if (VacuumActiveNWorkers) pg_atomic_sub_fetch_u32(VacuumActiveNWorkers, 1); } /* * Perform parallel vacuuming of indexes in leader process. * * Handles index vacuuming (or index cleanup) for indexes that are not * parallel safe. It's possible that this will vary for a given index, based * on details like whether we're performing index cleanup right now. * * Also performs vacuuming of smaller indexes that fell under the size cutoff * enforced by parallel_vacuum_compute_workers(). */ static void parallel_vacuum_process_unsafe_indexes(ParallelVacuumState *pvs) { Assert(!IsParallelWorker()); /* * Increment the active worker count if we are able to launch any worker. */ if (VacuumActiveNWorkers) pg_atomic_add_fetch_u32(VacuumActiveNWorkers, 1); for (int i = 0; i < pvs->nindexes; i++) { PVIndStats *indstats = &(pvs->indstats[i]); /* Skip, indexes that are safe for workers */ if (indstats->parallel_workers_can_process) continue; /* Do vacuum or cleanup of the index */ parallel_vacuum_process_one_index(pvs, pvs->indrels[i], indstats); } /* * We have completed the index vacuum so decrement the active worker * count. */ if (VacuumActiveNWorkers) pg_atomic_sub_fetch_u32(VacuumActiveNWorkers, 1); } /* * Vacuum or cleanup index either by leader process or by one of the worker * process. After vacuuming the index this function copies the index * statistics returned from ambulkdelete and amvacuumcleanup to the DSM * segment. */ static void parallel_vacuum_process_one_index(ParallelVacuumState *pvs, Relation indrel, PVIndStats *indstats) { IndexBulkDeleteResult *istat = NULL; IndexBulkDeleteResult *istat_res; IndexVacuumInfo ivinfo; /* * Update the pointer to the corresponding bulk-deletion result if someone * has already updated it */ if (indstats->istat_updated) istat = &(indstats->istat); ivinfo.index = indrel; ivinfo.heaprel = pvs->heaprel; ivinfo.analyze_only = false; ivinfo.report_progress = false; ivinfo.message_level = DEBUG2; ivinfo.estimated_count = pvs->shared->estimated_count; ivinfo.num_heap_tuples = pvs->shared->reltuples; ivinfo.strategy = pvs->bstrategy; /* Update error traceback information */ pvs->indname = pstrdup(RelationGetRelationName(indrel)); pvs->status = indstats->status; switch (indstats->status) { case PARALLEL_INDVAC_STATUS_NEED_BULKDELETE: istat_res = vac_bulkdel_one_index(&ivinfo, istat, pvs->dead_items, &pvs->shared->dead_items_info); break; case PARALLEL_INDVAC_STATUS_NEED_CLEANUP: istat_res = vac_cleanup_one_index(&ivinfo, istat); break; default: elog(ERROR, "unexpected parallel vacuum index status %d for index \"%s\"", indstats->status, RelationGetRelationName(indrel)); } /* * Copy the index bulk-deletion result returned from ambulkdelete and * amvacuumcleanup to the DSM segment if it's the first cycle because they * allocate locally and it's possible that an index will be vacuumed by a * different vacuum process the next cycle. Copying the result normally * happens only the first time an index is vacuumed. For any additional * vacuum pass, we directly point to the result on the DSM segment and * pass it to vacuum index APIs so that workers can update it directly. * * Since all vacuum workers write the bulk-deletion result at different * slots we can write them without locking. */ if (!indstats->istat_updated && istat_res != NULL) { memcpy(&(indstats->istat), istat_res, sizeof(IndexBulkDeleteResult)); indstats->istat_updated = true; /* Free the locally-allocated bulk-deletion result */ pfree(istat_res); } /* * Update the status to completed. No need to lock here since each worker * touches different indexes. */ indstats->status = PARALLEL_INDVAC_STATUS_COMPLETED; /* Reset error traceback information */ pvs->status = PARALLEL_INDVAC_STATUS_COMPLETED; pfree(pvs->indname); pvs->indname = NULL; /* * Call the parallel variant of pgstat_progress_incr_param so workers can * report progress of index vacuum to the leader. */ pgstat_progress_parallel_incr_param(PROGRESS_VACUUM_INDEXES_PROCESSED, 1); } /* * Returns false, if the given index can't participate in the next execution of * parallel index vacuum or parallel index cleanup. */ static bool parallel_vacuum_index_is_parallel_safe(Relation indrel, int num_index_scans, bool vacuum) { uint8 vacoptions; vacoptions = indrel->rd_indam->amparallelvacuumoptions; /* In parallel vacuum case, check if it supports parallel bulk-deletion */ if (vacuum) return ((vacoptions & VACUUM_OPTION_PARALLEL_BULKDEL) != 0); /* Not safe, if the index does not support parallel cleanup */ if (((vacoptions & VACUUM_OPTION_PARALLEL_CLEANUP) == 0) && ((vacoptions & VACUUM_OPTION_PARALLEL_COND_CLEANUP) == 0)) return false; /* * Not safe, if the index supports parallel cleanup conditionally, but we * have already processed the index (for bulkdelete). We do this to avoid * the need to invoke workers when parallel index cleanup doesn't need to * scan the index. See the comments for option * VACUUM_OPTION_PARALLEL_COND_CLEANUP to know when indexes support * parallel cleanup conditionally. */ if (num_index_scans > 0 && ((vacoptions & VACUUM_OPTION_PARALLEL_COND_CLEANUP) != 0)) return false; return true; } /* * Perform work within a launched parallel process. * * Since parallel vacuum workers perform only index vacuum or index cleanup, * we don't need to report progress information. */ void parallel_vacuum_main(dsm_segment *seg, shm_toc *toc) { ParallelVacuumState pvs; Relation rel; Relation *indrels; PVIndStats *indstats; PVShared *shared; TidStore *dead_items; BufferUsage *buffer_usage; WalUsage *wal_usage; int nindexes; char *sharedquery; ErrorContextCallback errcallback; /* * A parallel vacuum worker carries only the PROC_IN_VACUUM flag. The * leader, whether it's a backend running a VACUUM command or an * autovacuum worker, sets PROC_IN_VACUUM when it starts vacuuming the * table, and the worker inherits the flag by importing the leader's * snapshot (see ProcArrayInstallRestoredXmin). The leader's other flags * don't reach the worker: the snapshot import copies only the * PROC_XMIN_FLAGS bits, so PROC_VACUUM_FOR_WRAPAROUND isn't carried over, * and PROC_IS_AUTOVACUUM is never set on the worker in the first place * since parallel workers run as regular background workers, not * autovacuum workers. */ Assert(MyProc->statusFlags == PROC_IN_VACUUM); elog(DEBUG1, "starting parallel vacuum worker"); shared = (PVShared *) shm_toc_lookup(toc, PARALLEL_VACUUM_KEY_SHARED, false); /* Set debug_query_string for individual workers */ sharedquery = shm_toc_lookup(toc, PARALLEL_VACUUM_KEY_QUERY_TEXT, true); debug_query_string = sharedquery; pgstat_report_activity(STATE_RUNNING, debug_query_string); /* Track query ID */ pgstat_report_query_id(shared->queryid, false); /* * Open table. The lock mode is the same as the leader process. It's * okay because the lock mode does not conflict among the parallel * workers. */ rel = table_open(shared->relid, ShareUpdateExclusiveLock); /* * Open all indexes. indrels are sorted in order by OID, which should be * matched to the leader's one. */ vac_open_indexes(rel, RowExclusiveLock, &nindexes, &indrels); Assert(nindexes > 0); /* * Apply the desired value of maintenance_work_mem within this process. * Really we should use SetConfigOption() to change a GUC, but since we're * already in parallel mode guc.c would complain about that. Fortunately, * by the same token guc.c will not let any user-defined code change it. * So just avert your eyes while we do this: */ if (shared->maintenance_work_mem_worker > 0) maintenance_work_mem = shared->maintenance_work_mem_worker; /* Set index statistics */ indstats = (PVIndStats *) shm_toc_lookup(toc, PARALLEL_VACUUM_KEY_INDEX_STATS, false); /* Find dead_items in shared memory */ dead_items = TidStoreAttach(shared->dead_items_dsa_handle, shared->dead_items_handle); /* Set cost-based vacuum delay */ if (shared->is_autovacuum) { /* * Parallel autovacuum workers initialize cost-based delay parameters * from the leader's shared state rather than GUC defaults, because * the leader may have applied per-table or autovacuum-specific * overrides. pv_shared_cost_params must be set before calling * parallel_vacuum_update_shared_delay_params(). */ pv_shared_cost_params = &(shared->cost_params); parallel_vacuum_update_shared_delay_params(); } else VacuumUpdateCosts(); VacuumCostBalance = 0; VacuumCostBalanceLocal = 0; VacuumSharedCostBalance = &(shared->cost_balance); VacuumActiveNWorkers = &(shared->active_nworkers); /* Set parallel vacuum state */ pvs.indrels = indrels; pvs.nindexes = nindexes; pvs.indstats = indstats; pvs.shared = shared; pvs.dead_items = dead_items; pvs.relnamespace = get_namespace_name(RelationGetNamespace(rel)); pvs.relname = pstrdup(RelationGetRelationName(rel)); pvs.heaprel = rel; /* These fields will be filled during index vacuum or cleanup */ pvs.indname = NULL; pvs.status = PARALLEL_INDVAC_STATUS_INITIAL; /* Each parallel VACUUM worker gets its own access strategy. */ pvs.bstrategy = GetAccessStrategyWithSize(BAS_VACUUM, shared->ring_nbuffers * (BLCKSZ / 1024)); /* Setup error traceback support for ereport() */ errcallback.callback = parallel_vacuum_error_callback; errcallback.arg = &pvs; errcallback.previous = error_context_stack; error_context_stack = &errcallback; /* Prepare to track buffer usage during parallel execution */ InstrStartParallelQuery(); /* Process indexes to perform vacuum/cleanup */ parallel_vacuum_process_safe_indexes(&pvs); /* Report buffer/WAL usage during parallel execution */ buffer_usage = shm_toc_lookup(toc, PARALLEL_VACUUM_KEY_BUFFER_USAGE, false); wal_usage = shm_toc_lookup(toc, PARALLEL_VACUUM_KEY_WAL_USAGE, false); InstrEndParallelQuery(&buffer_usage[ParallelWorkerNumber], &wal_usage[ParallelWorkerNumber]); /* Report any remaining cost-based vacuum delay time */ if (track_cost_delay_timing) pgstat_progress_parallel_incr_param(PROGRESS_VACUUM_DELAY_TIME, parallel_vacuum_worker_delay_ns); TidStoreDetach(dead_items); /* Pop the error context stack */ error_context_stack = errcallback.previous; vac_close_indexes(nindexes, indrels, RowExclusiveLock); table_close(rel, ShareUpdateExclusiveLock); FreeAccessStrategy(pvs.bstrategy); if (shared->is_autovacuum) pv_shared_cost_params = NULL; } /* * Error context callback for errors occurring during parallel index vacuum. * The error context messages should match the messages set in the lazy vacuum * error context. If you change this function, change vacuum_error_callback() * as well. */ static void parallel_vacuum_error_callback(void *arg) { ParallelVacuumState *errinfo = arg; switch (errinfo->status) { case PARALLEL_INDVAC_STATUS_NEED_BULKDELETE: errcontext("while vacuuming index \"%s\" of relation \"%s.%s\"", errinfo->indname, errinfo->relnamespace, errinfo->relname); break; case PARALLEL_INDVAC_STATUS_NEED_CLEANUP: errcontext("while cleaning up index \"%s\" of relation \"%s.%s\"", errinfo->indname, errinfo->relnamespace, errinfo->relname); break; case PARALLEL_INDVAC_STATUS_INITIAL: case PARALLEL_INDVAC_STATUS_COMPLETED: default: return; } }