/
githubmirror
/
postgres
Обзор
Документация
Войти
/
githubmirror
/
postgres
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
src/Makefile.global.in
1 138 строк
36 KB
Peter Eisentraut
Update Unicode data to CLDR 48.2
13 апр 2026, 12:13
13 апр 2026, 12:13
b47854b
Код
Авторство
О чём код?
# -*-makefile-*- # src/Makefile.global.in # @configure_input@ #------------------------------------------------------------------------------ # All PostgreSQL makefiles include this file and use the variables it sets, # which in turn are put here by the configure script. There is no need for # users to edit this file -- if it turns out to be necessary then that's a # bug. # # A makefile that includes this file needs to set the variable `subdir' to # the relative path from the top to itself and `top_builddir' to the relative # path from itself to the top before including this file. (The "top" is the # parent directory of the directory this file is in.) #------------------------------------------------------------------------------ ########################################################################## # # Meta configuration standard_targets = all install installdirs uninstall clean distclean coverage check checkprep installcheck init-po update-po # these targets should recurse even into subdirectories not being built: standard_always_targets = clean distclean .PHONY: $(standard_targets) maintainer-clean install-strip html man installcheck-parallel update-unicode # make `all' the default target all: # Delete target files if the command fails after it has # started to update the file. .DELETE_ON_ERROR: # Never delete any intermediate files automatically. .SECONDARY: maintainer-clean: distclean # PostgreSQL version number VERSION = @PACKAGE_VERSION@ MAJORVERSION = @PG_MAJORVERSION@ VERSION_NUM = @PG_VERSION_NUM@ PACKAGE_URL = @PACKAGE_URL@ # Set top_srcdir, srcdir, and VPATH. ifdef PGXS top_srcdir = $(top_builddir) # If VPATH is set or Makefile is not in current directory we are building # the extension with VPATH so we set the variable here. ifdef VPATH srcdir = $(VPATH) else ifeq ($(CURDIR),$(dir $(firstword $(MAKEFILE_LIST)))) srcdir = . VPATH = else srcdir = $(dir $(firstword $(MAKEFILE_LIST))) VPATH = $(srcdir) endif endif else # not PGXS vpath_build = @vpath_build@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ifneq ($(vpath_build),yes) top_srcdir = $(top_builddir) srcdir = . else # vpath_build = yes top_srcdir = $(abs_top_srcdir) srcdir = $(top_srcdir)/$(subdir) VPATH = $(srcdir) endif endif # not PGXS ########################################################################## # # Installation directories # # These are set by the equivalent --xxxdir configure options. We # append "postgresql" to some of them, if the string does not already # contain "pgsql" or "postgres", in order to avoid directory clutter. # # In a PGXS build, we cannot use the values inserted into Makefile.global # by configure, since the installation tree may have been relocated. # Instead get the path values from pg_config. But users can specify # prefix explicitly, if they want to select their own installation # location. ifdef PGXS # Extension makefiles should set PG_CONFIG, but older ones might not ifndef PG_CONFIG PG_CONFIG = pg_config endif endif # This means: if ((not PGXS) or prefix) ifneq (,$(if $(PGXS),,1)$(prefix)) # Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build; # makefiles may only use the derived variables such as bindir. prefix := @prefix@ exec_prefix := @exec_prefix@ datarootdir := @datarootdir@ bindir := @bindir@ datadir := @datadir@ ifeq "$(findstring pgsql, $(datadir))" "" ifeq "$(findstring postgres, $(datadir))" "" override datadir := $(datadir)/postgresql endif endif sysconfdir := @sysconfdir@ ifeq "$(findstring pgsql, $(sysconfdir))" "" ifeq "$(findstring postgres, $(sysconfdir))" "" override sysconfdir := $(sysconfdir)/postgresql endif endif libdir := @libdir@ pkglibdir = $(libdir) ifeq "$(findstring pgsql, $(pkglibdir))" "" ifeq "$(findstring postgres, $(pkglibdir))" "" override pkglibdir := $(pkglibdir)/postgresql endif endif includedir := @includedir@ pkgincludedir = $(includedir) ifeq "$(findstring pgsql, $(pkgincludedir))" "" ifeq "$(findstring postgres, $(pkgincludedir))" "" override pkgincludedir := $(pkgincludedir)/postgresql endif endif mandir := @mandir@ docdir := @docdir@ ifeq "$(findstring pgsql, $(docdir))" "" ifeq "$(findstring postgres, $(docdir))" "" override docdir := $(docdir)/postgresql endif endif htmldir := @htmldir@ localedir := @localedir@ else # PGXS case bindir := $(shell $(PG_CONFIG) --bindir) datadir := $(shell $(PG_CONFIG) --sharedir) sysconfdir := $(shell $(PG_CONFIG) --sysconfdir) libdir := $(shell $(PG_CONFIG) --libdir) pkglibdir := $(shell $(PG_CONFIG) --pkglibdir) includedir := $(shell $(PG_CONFIG) --includedir) pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir) mandir := $(shell $(PG_CONFIG) --mandir) docdir := $(shell $(PG_CONFIG) --docdir) localedir := $(shell $(PG_CONFIG) --localedir) endif # PGXS # These derived path variables aren't separately configurable. includedir_server = $(pkgincludedir)/server includedir_internal = $(pkgincludedir)/internal pgxsdir = $(pkglibdir)/pgxs bitcodedir = $(pkglibdir)/bitcode ########################################################################## # # Features # # Records the choice of the various --enable-xxx and --with-xxx options. with_icu = @with_icu@ with_perl = @with_perl@ with_python = @with_python@ with_tcl = @with_tcl@ with_ssl = @with_ssl@ with_readline = @with_readline@ with_selinux = @with_selinux@ with_systemd = @with_systemd@ with_gssapi = @with_gssapi@ with_krb_srvnam = @with_krb_srvnam@ with_ldap = @with_ldap@ with_libcurl = @with_libcurl@ with_libnuma = @with_libnuma@ with_liburing = @with_liburing@ with_libxml = @with_libxml@ with_libxslt = @with_libxslt@ with_llvm = @with_llvm@ with_system_tzdata = @with_system_tzdata@ with_uuid = @with_uuid@ with_zlib = @with_zlib@ enable_rpath = @enable_rpath@ enable_nls = @enable_nls@ enable_debug = @enable_debug@ enable_dtrace = @enable_dtrace@ enable_coverage = @enable_coverage@ enable_injection_points = @enable_injection_points@ enable_tap_tests = @enable_tap_tests@ python_includespec = @python_includespec@ python_libdir = @python_libdir@ python_libspec = @python_libspec@ python_additional_libs = @python_additional_libs@ python_majorversion = @python_majorversion@ python_version = @python_version@ krb_srvtab = @krb_srvtab@ ICU_CFLAGS = @ICU_CFLAGS@ ICU_LIBS = @ICU_LIBS@ LIBNUMA_CFLAGS = @LIBNUMA_CFLAGS@ LIBNUMA_LIBS = @LIBNUMA_LIBS@ LIBURING_CFLAGS = @LIBURING_CFLAGS@ LIBURING_LIBS = @LIBURING_LIBS@ TCLSH = @TCLSH@ TCL_LIBS = @TCL_LIBS@ TCL_LIB_SPEC = @TCL_LIB_SPEC@ TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@ TCL_SHARED_BUILD = @TCL_SHARED_BUILD@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ LLVM_BINPATH = @LLVM_BINPATH@ CLANG = @CLANG@ BITCODE_CFLAGS = @BITCODE_CFLAGS@ BITCODE_CXXFLAGS = @BITCODE_CXXFLAGS@ ########################################################################## # # Programs and flags # Compilers CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ PG_SYSROOT = @PG_SYSROOT@ override CPPFLAGS += $(ICU_CFLAGS) $(LIBNUMA_CFLAGS) $(LIBURING_CFLAGS) ifdef PGXS override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS) else # not PGXS override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS) ifdef VPATH override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS) endif endif # not PGXS CC = @CC@ GCC = @GCC@ CXX = @CXX@ CFLAGS = @CFLAGS@ CFLAGS_SL = @CFLAGS_SL@ # *_MODULE are for flags applied to extension libraries CFLAGS_SL_MODULE = @CFLAGS_SL_MODULE@ CXXFLAGS_SL_MODULE = @CXXFLAGS_SL_MODULE@ CFLAGS_UNROLL_LOOPS = @CFLAGS_UNROLL_LOOPS@ CFLAGS_VECTORIZE = @CFLAGS_VECTORIZE@ CFLAGS_CRC = @CFLAGS_CRC@ PERMIT_DECLARATION_AFTER_STATEMENT = @PERMIT_DECLARATION_AFTER_STATEMENT@ PERMIT_MISSING_VARIABLE_DECLARATIONS = @PERMIT_MISSING_VARIABLE_DECLARATIONS@ CXXFLAGS = @CXXFLAGS@ have_cxx = @have_cxx@ LLVM_CPPFLAGS = @LLVM_CPPFLAGS@ LLVM_CFLAGS = @LLVM_CFLAGS@ LLVM_CXXFLAGS = @LLVM_CXXFLAGS@ # Kind-of compilers BISON = @BISON@ BISONFLAGS = @BISONFLAGS@ $(YFLAGS) FLEX = @FLEX@ FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS) DTRACE = @DTRACE@ DTRACEFLAGS = @DTRACEFLAGS@ NM = @NM@ ZIC = @ZIC@ # Linking AR = @AR@ AROPT = crs LIBS = @LIBS@ LDAP_LIBS_FE = @LDAP_LIBS_FE@ LDAP_LIBS_BE = @LDAP_LIBS_BE@ UUID_LIBS = @UUID_LIBS@ LLVM_LIBS=@LLVM_LIBS@ # It's critical that within LDFLAGS, all -L switches pointing to build-tree # directories come before any -L switches pointing to external directories. # Otherwise it's possible for, e.g., a platform-provided copy of libpq.so # to get linked in place of the one we've built. Therefore we adopt the # convention that the first component of LDFLAGS is an extra variable # LDFLAGS_INTERNAL, and -L and -l switches for PG's own libraries must be # put into LDFLAGS_INTERNAL, so they will appear ahead of those for external # libraries. # # We need LDFLAGS and LDFLAGS_INTERNAL to be "recursively expanded" variables, # else adjustments to, e.g., rpathdir don't work right. So we must NOT do # "LDFLAGS := something" anywhere, ditto for LDFLAGS_INTERNAL. # These initial assignments must be "=" type, and elsewhere we must only do # "LDFLAGS += something" or "LDFLAGS_INTERNAL += something". ifdef PGXS LDFLAGS_INTERNAL = -L$(libdir) else LDFLAGS_INTERNAL = -L$(top_builddir)/src/port -L$(top_builddir)/src/common endif LDFLAGS = $(LDFLAGS_INTERNAL) @LDFLAGS@ LDFLAGS_EX = @LDFLAGS_EX@ LDFLAGS_EX_BE = @LDFLAGS_EX_BE@ # LDFLAGS_SL might have already been assigned by calling makefile LDFLAGS_SL += @LDFLAGS_SL@ WINDRES = @WINDRES@ X = @EXEEXT@ # Perl # quoted to protect pathname with spaces PERL = '@PERL@' perl_archlibexp = @perl_archlibexp@ perl_privlibexp = @perl_privlibexp@ perl_includespec = @perl_includespec@ perl_embed_ccflags = @perl_embed_ccflags@ perl_embed_ldflags = @perl_embed_ldflags@ # Miscellaneous AWK = @AWK@ LN_S = @LN_S@ LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@ LIBCURL_LDFLAGS = @LIBCURL_LDFLAGS@ LIBCURL_LDLIBS = @LIBCURL_LDLIBS@ MSGFMT = @MSGFMT@ MSGFMT_FLAGS = @MSGFMT_FLAGS@ MSGMERGE = @MSGMERGE@ OPENSSL = @OPENSSL@ PYTHON = @PYTHON@ TAR = @TAR@ XGETTEXT = @XGETTEXT@ GZIP = gzip BZIP2 = bzip2 LZ4 = @LZ4@ ZSTD = @ZSTD@ DOWNLOAD = wget -O $@ --no-use-server-timestamps #DOWNLOAD = curl -o $@ # Unicode data information # Before each major release, update these and run make update-unicode. # Pick a release from here: <https://www.unicode.org/Public/>. Note # that the most recent release listed there is often a pre-release; # don't pick that one, except for testing. UNICODE_VERSION = 17.0.0 # Pick a release from here: <http://cldr.unicode.org/index/downloads> CLDR_VERSION = 48.2 # Tree-wide build support # Just about every code subdirectory wants to have the generated headers # available before building, but we don't want parallel makes all trying # to build the same headers. These rules, together with the recursion rules # below, ensure that we update the generated headers once, if needed, # at the top level of any "make all/install/check/installcheck" request. # If a particular subdirectory knows this isn't needed in itself or its # children, it can set NO_GENERATED_HEADERS. all install check installcheck: submake-generated-headers .PHONY: submake-generated-headers submake-generated-headers: ifndef NO_GENERATED_HEADERS ifeq ($(MAKELEVEL),0) $(MAKE) -C $(top_builddir)/src/backend generated-headers endif endif # Testing # In much the same way as above, these rules ensure that we build a temp # install tree just once in any recursive "make check". The additional test # on abs_top_builddir prevents doing anything foolish to the root directory. check: temp-install .PHONY: temp-install # prepend to path if already set, else just set it define add_to_path $(1)="$(if $($(1)),$(2):$$$(1),$(2))" endef # platform-specific environment variable to set shared library path # individual ports can override this later, this is the default name ld_library_path_var = LD_LIBRARY_PATH # with_temp_install_extra is for individual ports to define if they # need something more here. If not defined then the expansion does # nothing. with_temp_install = \ PATH="$(abs_top_builddir)/tmp_install$(bindir):$(CURDIR):$$PATH" \ $(call add_to_path,$(strip $(ld_library_path_var)),$(abs_top_builddir)/tmp_install$(libdir)) \ INITDB_TEMPLATE='$(abs_top_builddir)'/tmp_install/initdb-template \ $(with_temp_install_extra) temp-install: | submake-generated-headers ifndef NO_TEMP_INSTALL ifneq ($(abs_top_builddir),) ifeq ($(MAKELEVEL),0) rm -rf '$(abs_top_builddir)'/tmp_install $(MKDIR_P) '$(abs_top_builddir)'/tmp_install/log $(MAKE) -C '$(top_builddir)' DESTDIR='$(abs_top_builddir)'/tmp_install install >'$(abs_top_builddir)'/tmp_install/log/install.log 2>&1 $(MAKE) -j1 $(if $(CHECKPREP_TOP),-C $(CHECKPREP_TOP),) checkprep >>'$(abs_top_builddir)'/tmp_install/log/install.log 2>&1 $(with_temp_install) initdb --auth trust --no-sync --no-instructions --lc-messages=C --no-clean '$(abs_top_builddir)'/tmp_install/initdb-template >>'$(abs_top_builddir)'/tmp_install/log/initdb-template.log 2>&1 endif endif endif # Tasks to run serially at the end of temp-install. Some EXTRA_INSTALL # entries appear more than once in the tree, and parallel installs of the same # file can fail with EEXIST. checkprep: $(if $(EXTRA_INSTALL),for extra in $(EXTRA_INSTALL); do $(MAKE) -C '$(top_builddir)'/$$extra DESTDIR='$(abs_top_builddir)'/tmp_install install || exit; done) PROVE = @PROVE@ # There are common routines in src/test/perl, and some test suites have # extra perl modules in their own directory. PG_PROVE_FLAGS = -I $(top_srcdir)/src/test/perl/ -I $(srcdir) # User-supplied prove flags such as --verbose can be provided in PROVE_FLAGS. PROVE_FLAGS = ifeq ($(enable_tap_tests),yes) ifndef PGXS define prove_installcheck echo "# +++ tap install-check in $(subdir) +++" && \ rm -rf '$(CURDIR)'/tmp_check && \ $(MKDIR_P) '$(CURDIR)'/tmp_check && \ cd $(srcdir) && \ TESTLOGDIR='$(CURDIR)/tmp_check/log' \ TESTDATADIR='$(CURDIR)/tmp_check' \ PATH="$(bindir):$(CURDIR):$$PATH" \ PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \ PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \ share_contrib_dir='$(DESTDIR)$(datadir)/$(datamoduledir)' \ $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl) endef else # PGXS case define prove_installcheck echo "# +++ tap install-check in $(subdir) +++" && \ rm -rf '$(CURDIR)'/tmp_check && \ $(MKDIR_P) '$(CURDIR)'/tmp_check && \ cd $(srcdir) && \ TESTLOGDIR='$(CURDIR)/tmp_check/log' \ TESTDATADIR='$(CURDIR)/tmp_check' \ PATH="$(bindir):$(CURDIR):$$PATH" \ PGPORT='6$(DEF_PGPORT)' \ PG_REGRESS='$(top_builddir)/src/test/regress/pg_regress' \ $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl) endef endif # PGXS define prove_check echo "# +++ tap check in $(subdir) +++" && \ rm -rf '$(CURDIR)'/tmp_check && \ $(MKDIR_P) '$(CURDIR)'/tmp_check && \ cd $(srcdir) && \ TESTLOGDIR='$(CURDIR)/tmp_check/log' \ TESTDATADIR='$(CURDIR)/tmp_check' \ $(with_temp_install) \ PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \ PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \ share_contrib_dir='$(abs_top_builddir)/tmp_install$(datadir)/$(datamoduledir)' \ $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl) endef else prove_installcheck = @echo "TAP tests not enabled. Try configuring with --enable-tap-tests" prove_check = $(prove_installcheck) endif # Installation. install_bin = @install_bin@ install_sh = $(SHELL) $(top_srcdir)/config/install-sh -c INSTALL = $(if $(use_install_sh),$(install_sh),$(if $(install_bin),$(install_bin),$(install_sh))) INSTALL_SCRIPT_MODE = 755 INSTALL_DATA_MODE = 644 INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG) INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE) INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE) INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG) INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG) # Override in Makefile.port if necessary INSTALL_SHLIB_OPTS = -m 755 MKDIR_P = @MKDIR_P@ missing = $(SHELL) $(top_srcdir)/config/missing STRIP = @STRIP@ STRIP_STATIC_LIB = @STRIP_STATIC_LIB@ STRIP_SHARED_LIB = @STRIP_SHARED_LIB@ # Documentation DBTOEPUB = @DBTOEPUB@ FOP = @FOP@ XMLLINT = @XMLLINT@ XSLTPROC = @XSLTPROC@ # Code coverage GCOV = @GCOV@ LCOV = @LCOV@ GENHTML = @GENHTML@ # Feature settings DEF_PGPORT = @default_port@ WANTED_LANGUAGES = @WANTED_LANGUAGES@ ########################################################################## # # Additional platform-specific settings # # Name of the "template" PORTNAME= @PORTNAME@ build_os = @build_os@ host_tuple = @host@ host_os = @host_os@ host_cpu = @host_cpu@ # Backend stack size limit has to be hard-wired on Windows (it's in bytes) WIN32_STACK_RLIMIT=4194304 DLSUFFIX = @DLSUFFIX@ # Pull in platform-specific magic include $(top_builddir)/src/Makefile.port # Set up rpath if enabled. By default it will point to our libdir, # but individual Makefiles can force other rpath paths if needed. rpathdir = $(libdir) ifeq ($(enable_rpath), yes) LDFLAGS += $(rpath) endif # Show the DLSUFFIX to build scripts (e.g. buildfarm) .PHONY: show_dl_suffix show_dl_suffix: @echo $(DLSUFFIX) ########################################################################## # # Some variables needed to find some client interfaces ifdef PGXS # some contribs assumes headers and libs are in the source tree... libpq_srcdir = $(includedir) libpq_builddir = $(libdir) else libpq_srcdir = $(top_srcdir)/src/interfaces/libpq libpq_builddir = $(top_builddir)/src/interfaces/libpq endif # How to link to libpq. (This macro may be used as-is by backend extensions. # Client-side code should go through libpq_pgport or libpq_pgport_shlib, # instead.) libpq = -L$(libpq_builddir) -lpq # libpq_pgport is for use by client executables (not libraries) that use libpq. # We used to use this to force libpgport and libpgcommon to be linked before # libpq, ensuring that clients would pull symbols from those libraries rather # than possibly getting them from libpq (and thereby having an unwanted # dependency on which symbols libpq uses). However, now that we can prevent # libpq from exporting those symbols on all platforms of interest, we don't # worry about that anymore. The previous technique resulted in duplicate # libraries in link commands, since those libraries also appear in $(LIBS). # Some platforms warn about that, so avoiding those warnings is now more # important. Hence, $(libpq_pgport) is now equivalent to $(libpq), but we # still recommend using it for client executables in case some other reason # appears to handle them differently. libpq_pgport = $(libpq) # libpq_pgport_shlib is the same idea, but for use in client shared libraries. # We need those clients to use the shlib variants. (Ideally, users of this # macro would strip libpgport and libpgcommon from $(LIBS), but no harm is # done if they don't, since they will have satisfied all their references # from these libraries.) ifdef PGXS libpq_pgport_shlib = -L$(libdir) -lpgcommon_shlib -lpgport_shlib $(libpq) else libpq_pgport_shlib = -L$(top_builddir)/src/common -lpgcommon_shlib -L$(top_builddir)/src/port -lpgport_shlib $(libpq) endif # Cygwin seems to need ldap libraries to be mentioned here, too ifeq ($(PORTNAME),cygwin) libpq_pgport += $(LDAP_LIBS_FE) endif ########################################################################## # # Commonly used submake targets submake-libpq: | submake-generated-headers $(MAKE) -C $(libpq_builddir) all submake-libpgport: | submake-generated-headers $(MAKE) -C $(top_builddir)/src/port all $(MAKE) -C $(top_builddir)/src/common all submake-libpgfeutils: | submake-generated-headers $(MAKE) -C $(top_builddir)/src/port all $(MAKE) -C $(top_builddir)/src/common all $(MAKE) -C $(top_builddir)/src/fe_utils all .PHONY: submake-libpq submake-libpgport submake-libpgfeutils ########################################################################## # # Testing support # Store any configure-time setting for PG_TEST_EXTRA, but let environment # variables override it to maintain the historical behavior of the tests. # (Standard `=` assignment would require devs to use a commandline option.) # This is skipped in PGXS mode to keep the setting from escaping into other # projects' builds. ifndef PGXS PG_TEST_EXTRA ?= @PG_TEST_EXTRA@ export PG_TEST_EXTRA endif ifneq ($(USE_MODULE_DB),) PL_TESTDB = pl_regression_$(NAME) ifneq ($(MODULE_big),) CONTRIB_TESTDB=contrib_regression_$(MODULE_big) ISOLATION_TESTDB=isolation_regression_$(MODULE_big) else ifneq ($(MODULES),) CONTRIB_TESTDB=contrib_regression_$(word 1,$(MODULES)) ISOLATION_TESTDB=isolation_regression_$(word 1,$(MODULES)) else CONTRIB_TESTDB=contrib_regression_$(word 1,$(REGRESS)) ISOLATION_TESTDB=isolation_regression_$(word 1,$(ISOLATION)) endif endif else PL_TESTDB = pl_regression CONTRIB_TESTDB = contrib_regression ISOLATION_TESTDB = isolation_regression endif ifdef NO_LOCALE NOLOCALE += --no-locale endif # file with extra config for temp build TEMP_CONF = ifdef TEMP_CONFIG TEMP_CONF += --temp-config=$(TEMP_CONFIG) endif pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE) pg_regress_clean_files = results/ regression.diffs regression.out tmp_check/ tmp_check_iso/ log/ output_iso/ pg_regress_check = \ echo "\# +++ regress check in $(subdir) +++" && \ $(with_temp_install) \ $(top_builddir)/src/test/regress/pg_regress \ --temp-instance=./tmp_check \ --inputdir=$(srcdir) \ --bindir= \ $(TEMP_CONF) \ $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS) pg_regress_installcheck = \ echo "\# +++ regress install-check in $(subdir) +++" && \ $(top_builddir)/src/test/regress/pg_regress \ --inputdir=$(srcdir) \ --bindir='$(bindir)' \ $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS) pg_isolation_regress_check = \ echo "\# +++ isolation check in $(subdir) +++" && \ $(with_temp_install) \ $(top_builddir)/src/test/isolation/pg_isolation_regress \ --temp-instance=./tmp_check_iso \ --inputdir=$(srcdir) --outputdir=output_iso \ --bindir= \ $(TEMP_CONF) \ $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS) pg_isolation_regress_installcheck = \ echo "\# +++ isolation install-check in $(subdir) +++" && \ $(top_builddir)/src/test/isolation/pg_isolation_regress \ --inputdir=$(srcdir) --outputdir=output_iso \ --bindir='$(bindir)' \ $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS) ########################################################################## # # Customization # # This includes your local customizations if Makefile.custom exists # in the source directory. This file doesn't exist in the original # distribution so that it doesn't get overwritten when you upgrade. # # NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL. # You are liable to shoot yourself in the foot if you use it without # knowing exactly what you're doing. The preferred (and more # reliable) method is to communicate what you want to do to the # configure script, and leave the makefiles alone. -include $(top_srcdir)/src/Makefile.custom ifneq ($(CUSTOM_INSTALL),) INSTALL= $(CUSTOM_INSTALL) endif ifneq ($(CUSTOM_CC),) CC= $(CUSTOM_CC) endif ifneq ($(CUSTOM_COPT),) COPT= $(CUSTOM_COPT) endif # # These variables are meant to be set in the environment of "make" # to add flags to whatever configure picked. Unlike the ones above, # they are documented. # ifdef COPT CFLAGS += $(COPT) CXXFLAGS += $(COPT) LDFLAGS += $(COPT) endif ifdef PROFILE CFLAGS += $(PROFILE) LDFLAGS += $(PROFILE) endif ########################################################################## # # substitute implementations of C library routines (see src/port/) # note we already included -L.../src/port in LDFLAGS above LIBOBJS = @LIBOBJS@ # files needed for the chosen CRC-32C implementation PG_CRC32C_OBJS = @PG_CRC32C_OBJS@ LIBS := -lpgcommon -lpgport $(LIBS) # to make ws2_32.lib the last library ifeq ($(PORTNAME),win32) LIBS += -lws2_32 endif ########################################################################## # # Global targets and rules %.c: %.l $(FLEX) $(if $(FLEX_NO_BACKUP),-b) $(FLEXFLAGS) -o'$@' $< @$(if $(FLEX_NO_BACKUP),if [ `wc -l <lex.backup` -eq 1 ]; then rm lex.backup; else echo "Scanner requires backup; see lex.backup." 1>&2; exit 1; fi) %.c: %.y $(if $(BISON_CHECK_CMD),$(BISON_CHECK_CMD)) $(BISON) $(BISONFLAGS) -o $@ $< %.i: %.c $(CPP) $(CPPFLAGS) -o $@ $< %.gz: % $(GZIP) --best -c $< >$@ %.bz2: % $(BZIP2) -c $< >$@ # Direct builds of foo.c -> foo are disabled to avoid generating # *.dSYM junk on Macs. All builds should normally go through the # foo.c -> foo.o -> foo steps. This also ensures that dependency # tracking (see below) is used. %: %.c # Replace gmake's default rule for linking a single .o file to produce an # executable. The main point here is to put LDFLAGS after the .o file, # since we put -l switches into LDFLAGS and those are order-sensitive. # In addition, include CFLAGS and LDFLAGS_EX per project conventions. %: %.o $(CC) $(CFLAGS) $^ $(LDFLAGS) $(LDFLAGS_EX) $(LIBS) -o $@$(X) ifndef PGXS # Remake Makefile.global from Makefile.global.in if the latter # changed. In order to trigger this rule, the including file must # write `include $(top_builddir)/src/Makefile.global', not some # shortcut thereof. $(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status cd $(top_builddir) && ./config.status src/Makefile.global # Remake pg_config.h from pg_config.h.in if the latter changed. # config.status will not change the timestamp on pg_config.h if it # doesn't change, so as to avoid recompiling the entire tree # unnecessarily. Therefore we make config.status update a timestamp file # stamp-h every time it runs, so that we don't trigger this rule every time. # (We do trigger the null rule for stamp-h to pg_config.h every time; so it's # important for that rule to be empty!) # # Of course you need to turn on dependency tracking to get any # dependencies on pg_config.h. $(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h ; $(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status cd $(top_builddir) && ./config.status src/include/pg_config.h # Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same # logic as above. $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h ; $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h # When configure changes, rerun configure with the same options as # last time. To change configure, you need to run autoconf manually. $(top_builddir)/config.status: $(top_srcdir)/configure cd $(top_builddir) && ./config.status --recheck endif # not PGXS install-strip: # install-strip always uses install-sh, so that strip options can be # passed. $(MAKE) use_install_sh=yes \ INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \ INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \ INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \ INSTALL_STRIP_FLAG=-s \ install ########################################################################## # # Recursive make support # ---------------------- # Instead of recursing through subdirectories with a for loop or # repeated $(MAKE) -C whatever calls, this is a little smarter: it # allows parallel make across directories and lets make -k and -q work # correctly. # We need the ability to export target-specific variables, which was # added in GNU make 3.81. That also happens to be the version # where the .FEATURES variable was introduced, so this is a simple check. ifndef .FEATURES $(error GNU make 3.81 or newer is required. You are using version $(MAKE_VERSION)) endif # This function is only for internal use below. It should be called # using $(eval). It will set up a target so that it recurses into a # given subdirectory. For the tree-wide all/install/check/installcheck cases, # ensure we do our one-time tasks before recursing (see targets above). # Note that to avoid a nasty bug in make 3.80, # this function was written to not use any complicated constructs (like # multiple targets on a line) and also not contain any lines that expand # to more than about 200 bytes. This is why we make it apply to just one # subdirectory at a time, rather than to a list of subdirectories. # $1: target name, e.g., all # $2: subdir name # $3: target to run in subdir, usually same as $1 define _create_recursive_target .PHONY: $(1)-$(2)-recurse $(1): $(1)-$(2)-recurse $(1)-$(2)-recurse: $(if $(filter all install check installcheck, $(3)), submake-generated-headers) $(if $(filter check, $(3)), temp-install) $$(MAKE) -C $(2) $(3) endef # Note that the use of $$ on the last line above is important; we want # $(MAKE) to be evaluated when the rule is run, not when the $(eval) is run # to create the rule. This is necessary to get make -q working. # Call this function in a makefile that needs to recurse into subdirectories. # In the normal case all arguments can be defaulted. # $1: targets to make recursive (defaults to list of standard targets) # $2: list of subdirs (defaults to SUBDIRS variable) # $3: target to run in subdir (defaults to current element of $1) recurse = $(foreach target,$(if $1,$1,$(standard_targets)),$(foreach subdir,$(if $2,$2,$(SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target)))))) # If a makefile's list of SUBDIRS varies depending on configuration, then # any subdirectories excluded from SUBDIRS should instead be added to # ALWAYS_SUBDIRS, and then it must call recurse_always as well as recurse. # This ensures that distclean, etc will apply to all subdirectories. # In the normal case all arguments will be defaulted. # $1: targets to make recursive (defaults to standard_always_targets) # $2: list of subdirs (defaults to ALWAYS_SUBDIRS variable) # $3: target to run in subdir (defaults to current element of $1) recurse_always = $(foreach target,$(if $1,$1,$(standard_always_targets)),$(foreach subdir,$(if $2,$2,$(ALWAYS_SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target)))))) ########################################################################## # # Automatic dependency generation # ------------------------------- # When we configure with --enable-depend then we override the default # compilation rule with the magic below. While or after creating the # actual output file we also create a dependency list for the .c file. # Next time we invoke make we will have top-notch information about # whether this file needs to be updated. The dependency files are kept # in the .deps subdirectory of each directory. autodepend = @autodepend@ ifeq ($(autodepend), yes) ifndef COMPILE.c COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c endif ifndef COMPILE.cc COMPILE.cc = $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c endif DEPDIR = .deps ifeq ($(GCC), yes) # GCC allows us to create object and dependency file in one invocation. %.o : %.c @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi $(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po %.o : %.cpp @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi $(COMPILE.cc) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po endif # GCC # Include all the dependency files generated for the current # directory. Note that make would complain if include was called with # no arguments. Po_files := $(wildcard $(DEPDIR)/*.Po) ifneq (,$(Po_files)) include $(Po_files) endif # hook for clean-up clean distclean: clean-deps .PHONY: clean-deps clean-deps: @rm -rf $(DEPDIR) endif # autodepend ########################################################################## # # Native language support ifeq ($(enable_nls), yes) ifneq (,$(wildcard $(srcdir)/nls.mk)) include $(top_srcdir)/src/nls-global.mk endif # nls.mk endif # enable_nls ########################################################################## # # Coverage # Explanation of involved files: # foo.c source file # foo.o object file # foo.gcno gcov graph (a.k.a. "notes") file, created at compile time # (by gcc -ftest-coverage) # foo.gcda gcov data file, created when the program is run (for # programs compiled with gcc -fprofile-arcs) # foo.c.gcov gcov output file with coverage information, created by # gcov from foo.gcda (by "make coverage") # foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly # interesting # lcov_test.info # lcov tracefile, built from gcda files in one directory, # later collected by "make coverage-html" # lcov_base.info # tracefile for zero counters for every file, so that # even files that are not touched by tests are counted # for the overall coverage rate ifeq ($(enable_coverage), yes) # make coverage -- text output local_gcda_files = $(wildcard *.gcda) coverage: $(local_gcda_files:.gcda=.c.gcov) %.c.gcov: %.gcda $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out # make coverage-html -- HTML output via lcov .PHONY: coverage-html coverage-html: coverage-html-stamp GENHTML_FLAGS = -q --legend GENHTML_TITLE = PostgreSQL $(VERSION) coverage-html-stamp: lcov_base.info lcov_test.info rm -rf coverage $(GENHTML) $(GENHTML_FLAGS) -o coverage --title='$(GENHTML_TITLE)' --num-spaces=4 $(if $(filter no,$(vpath_build)),--prefix='$(abs_top_srcdir)') $^ touch $@ LCOV += --gcov-tool $(GCOV) LCOVFLAGS = -q --no-external all_gcno_files = $(shell find . -name '*.gcno' -print) lcov_base.info: $(all_gcno_files) $(LCOV) $(LCOVFLAGS) -c -i -d . -d $(srcdir) -o $@ all_gcda_files = $(shell find . -name '*.gcda' -print) lcov_test.info: $(all_gcda_files) $(LCOV) $(LCOVFLAGS) -c -d . -d $(srcdir) -o $@ # hook for clean-up clean distclean: clean-coverage .PHONY: clean-coverage clean-coverage: rm -rf coverage coverage-html-stamp rm -f *.gcda *.gcno lcov*.info *.gcov .*.gcov *.gcov.out # User-callable target to reset counts between test runs coverage-clean: rm -f `find . -name '*.gcda' -print` endif # enable_coverage ########################################################################## # # LLVM support # ifndef COMPILE.c.bc # -Wno-ignored-attributes added so gnu_printf doesn't trigger # warnings, when the main binary is compiled with C. COMPILE.c.bc = $(CLANG) -Wno-ignored-attributes $(BITCODE_CFLAGS) $(CPPFLAGS) -flto=thin -emit-llvm -c endif ifndef COMPILE.cxx.bc COMPILE.cxx.bc = $(CLANG) -xc++ -Wno-ignored-attributes $(BITCODE_CXXFLAGS) $(CPPFLAGS) -flto=thin -emit-llvm -c endif %.bc : %.c $(COMPILE.c.bc) -o $@ $< %.bc : %.cpp $(COMPILE.cxx.bc) -o $@ $< # Install LLVM bitcode module (for JITing). # # The arguments are: # $(1) name of the module (e.g. an extension's name or postgres for core code) # $(2) source objects, with .o suffix # # The many INSTALL_DATA invocations aren't particularly fast, it'd be # good if we could coalesce them, but I didn't find a good way. # # Note: blank line at end of macro is necessary to let it be used in foreach define install_llvm_module $(MKDIR_P) '$(DESTDIR)${bitcodedir}/$(1)' $(MKDIR_P) $(sort $(dir $(addprefix '$(DESTDIR)${bitcodedir}'/$(1)/, $(2)))) $(foreach obj, ${2}, $(INSTALL_DATA) $(patsubst %.o,%.bc, $(obj)) '$(DESTDIR)${bitcodedir}'/$(1)/$(dir $(obj)) ) cd '$(DESTDIR)${bitcodedir}' && $(LLVM_BINPATH)/llvm-lto -thinlto -thinlto-action=thinlink -o $(1).index.bc $(addprefix $(1)/,$(patsubst %.o,%.bc, $(2))) endef # Uninstall LLVM bitcode module. # # The arguments are: # $(1) name of the module (e.g. an extension's name or postgres for core code) # # This intentionally doesn't use the explicit installed file list, # seems too likely to change regularly. define uninstall_llvm_module rm -rf '$(DESTDIR)${bitcodedir}/$(1)/' rm -f '$(DESTDIR)${bitcodedir}/$(1).index.bc' endef