doc/src/sgml/ref/psql-ref.sgml - master - githubmirror/postgres

doc/src/sgml/ref/psql-ref.sgml
5 815 строк244 KB
Nathan Bossart
psql: Don't do backquote expansion in \unrestrict.
10 авг 2026, 16:37
10 авг 2026, 16:37086f6f1
<!--
doc/src/sgml/ref/psql-ref.sgml
PostgreSQL documentation
-->

<refentry id="app-psql">
 <indexterm zone="app-psql">
  <primary>psql</primary>
 </indexterm>

  <refmeta>
    <refentrytitle><application>psql</application></refentrytitle>
    <manvolnum>1</manvolnum>
    <refmiscinfo>Application</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname><application>psql</application></refname>
    <refpurpose>
      <productname>PostgreSQL</productname> interactive terminal
    </refpurpose>
  </refnamediv>

 <refsynopsisdiv>
  <cmdsynopsis>
   <command>psql</command>
   <arg rep="repeat"><replaceable class="parameter">option</replaceable></arg>
   <arg choice="opt"><replaceable class="parameter">dbname</replaceable>
   <arg choice="opt"><replaceable class="parameter">username</replaceable></arg></arg>
  </cmdsynopsis>
 </refsynopsisdiv>

 <refsect1>
  <title>Description</title>

    <para>
     <application>psql</application> is a terminal-based front-end to
     <productname>PostgreSQL</productname>. It enables you to type in
     queries interactively, issue them to
     <productname>PostgreSQL</productname>, and see the query results.
     Alternatively, input can be from a file or from command line
     arguments. In addition, <application>psql</application> provides a
     number of meta-commands and various shell-like features to
     facilitate writing scripts and automating a wide variety of tasks.
    </para>
 </refsect1>

 <refsect1 id="r1-app-psql-3">
  <title>Options</title>

  <variablelist>
    <varlistentry id="app-psql-option-echo-all">
      <term><option>-a</option></term>
      <term><option>--echo-all</option></term>
      <listitem>
      <para>
      Print all nonempty input lines to standard output as they are read.
      (This does not apply to lines read interactively.) This is
      equivalent to setting the variable <varname>ECHO</varname> to
      <literal>all</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-no-align">
      <term><option>-A</option></term>
      <term><option>--no-align</option></term>
      <listitem>
      <para>
      Switches to unaligned output mode. (The default output mode is
      <literal>aligned</literal>.)  This is equivalent to
      <command>\pset format unaligned</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-echo-errors">
      <term><option>-b</option></term>
      <term><option>--echo-errors</option></term>
      <listitem>
      <para>
      Print failed SQL commands to standard error output. This is
      equivalent to setting the variable <varname>ECHO</varname> to
      <literal>errors</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-command">
      <term><option>-c <replaceable class="parameter">command</replaceable></option></term>
      <term><option>--command=<replaceable class="parameter">command</replaceable></option></term>
      <listitem>
      <para>
       Specifies that <application>psql</application> is to execute the given
       command string, <replaceable class="parameter">command</replaceable>.
       This option can be repeated and combined in any order with
       the <option>-f</option> option.  When either <option>-c</option>
       or <option>-f</option> is specified, <application>psql</application>
       does not read commands from standard input; instead it terminates
       after processing all the <option>-c</option> and <option>-f</option>
       options in sequence.
      </para>
      <para>
       <replaceable class="parameter">command</replaceable> must be either
       a command string that is completely parsable by the server (i.e.,
       it contains no <application>psql</application>-specific features),
       or a single backslash command. Thus you cannot mix
       <acronym>SQL</acronym> and <application>psql</application>
       meta-commands within a <option>-c</option> option. To achieve that,
       you could use repeated <option>-c</option> options or pipe the string
       into <application>psql</application>, for example:
<programlisting>
psql -c '\x' -c 'SELECT * FROM foo;'
</programlisting>
       or
<programlisting>
echo '\x \\ SELECT * FROM foo;' | psql
</programlisting>
       (<literal>\\</literal> is the separator meta-command.)
      </para>
      <para>
       Each <acronym>SQL</acronym> command string passed
       to <option>-c</option> is sent to the server as a single request.
       Because of this, the server executes it as a single transaction even
       if the string contains multiple <acronym>SQL</acronym> commands,
       unless there are explicit <command>BEGIN</command>/<command>COMMIT</command>
       commands included in the string to divide it into multiple
       transactions.  (See <xref linkend="protocol-flow-multi-statement"/>
       for more details about how the server handles multi-query strings.)
      </para>
      <para>
       If having several commands executed in one transaction is not desired,
       use repeated <option>-c</option> commands or feed multiple commands to
       <application>psql</application>'s standard input,
       either using <application>echo</application> as illustrated above, or
       via a shell here-document, for example:
<programlisting>
psql &lt;&lt;EOF
\x
SELECT * FROM foo;
EOF
</programlisting></para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-csv">
      <term><option>--csv</option></term>
      <listitem>
      <para>
      Switches to <acronym>CSV</acronym> (Comma-Separated Values) output
      mode.  This is equivalent to <command>\pset format csv</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-dbname">
      <term><option>-d <replaceable class="parameter">dbname</replaceable></option></term>
      <term><option>--dbname=<replaceable class="parameter">dbname</replaceable></option></term>
      <listitem>
      <para>
       Specifies the name of the database to connect to. This is
       equivalent to specifying <replaceable
       class="parameter">dbname</replaceable> as the first non-option
       argument on the command line.  The <replaceable>dbname</replaceable>
       can be a <link linkend="libpq-connstring">connection string</link>.
       If so, connection string parameters will override any conflicting
       command line options.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-echo-queries">
      <term><option>-e</option></term>
      <term><option>--echo-queries</option></term>
      <listitem>
      <para>
      Copy all SQL commands sent to the server to standard output as well.
      This is equivalent
      to setting the variable <varname>ECHO</varname> to
      <literal>queries</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-echo-hidden">
      <term><option>-E</option></term>
      <term><option>--echo-hidden</option></term>
      <listitem>
      <para>
      Echo the actual queries generated by <command>\d</command> and other backslash
      commands. You can use this to study <application>psql</application>'s
      internal operations. This is equivalent to
      setting the variable <varname>ECHO_HIDDEN</varname> to <literal>on</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-file">
      <term><option>-f <replaceable class="parameter">filename</replaceable></option></term>
      <term><option>--file=<replaceable class="parameter">filename</replaceable></option></term>
      <listitem>
      <para>
       Read commands from the
       file <replaceable class="parameter">filename</replaceable>,
       rather than standard input.
       This option can be repeated and combined in any order with
       the <option>-c</option> option.  When either <option>-c</option>
       or <option>-f</option> is specified, <application>psql</application>
       does not read commands from standard input; instead it terminates
       after processing all the <option>-c</option> and <option>-f</option>
       options in sequence.
       Except for that, this option is largely equivalent to the
       meta-command <command>\i</command>.
      </para>

      <para>
       If <replaceable>filename</replaceable> is <literal>-</literal>
       (hyphen), then standard input is read until an EOF indication
       or <command>\q</command> meta-command.  This can be used to intersperse
       interactive input with input from files.  Note however that Readline
       is not used in this case (much as if <option>-n</option> had been
       specified).
      </para>

      <para>
      Using this option is subtly different from writing <literal>psql
      &lt; <replaceable
      class="parameter">filename</replaceable></literal>. In general,
      both will do what you expect, but using <literal>-f</literal>
      enables some nice features such as error messages with line
      numbers. There is also a slight chance that using this option will
      reduce the start-up overhead. On the other hand, the variant using
      the shell's input redirection is (in theory) guaranteed to yield
      exactly the same output you would have received had you entered
      everything by hand.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-field-separator">
      <term><option>-F <replaceable class="parameter">separator</replaceable></option></term>
      <term><option>--field-separator=<replaceable class="parameter">separator</replaceable></option></term>
      <listitem>
      <para>
      Use <replaceable class="parameter">separator</replaceable> as the
      field separator for unaligned output. This is equivalent to
      <command>\pset fieldsep</command> or <command>\f</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-field-host">
      <term><option>-h <replaceable class="parameter">hostname</replaceable></option></term>
      <term><option>--host=<replaceable class="parameter">hostname</replaceable></option></term>
      <listitem>
      <para>
      Specifies the host name of the machine on which the
      server is running. If the value begins
      with a slash, it is used as the directory for the Unix-domain
      socket.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-html">
      <term><option>-H</option></term>
      <term><option>--html</option></term>
      <listitem>
      <para>
      Switches to <acronym>HTML</acronym> output mode.  This is
      equivalent to <command>\pset format html</command> or the
      <command>\H</command> command.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-list">
      <term><option>-l</option></term>
      <term><option>--list</option></term>
      <listitem>
      <para>
      List all available databases, then exit. Other non-connection
      options are ignored. This is similar to the meta-command
      <command>\list</command>.
      </para>

      <para>
      When this option is used, <application>psql</application> will connect
      to the database <literal>postgres</literal>, unless a different database
      is named on the command line (option <option>-d</option> or non-option
      argument, possibly via a service entry, but not via an environment
      variable).
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-log-file">
      <term><option>-L <replaceable class="parameter">filename</replaceable></option></term>
      <term><option>--log-file=<replaceable class="parameter">filename</replaceable></option></term>
      <listitem>
      <para>
       Write all query output into file <replaceable
       class="parameter">filename</replaceable>, in addition to the
       normal output destination.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-no-readline">
      <term><option>-n</option></term>
      <term><option>--no-readline</option></term>
      <listitem>
      <para>
       Do not use <application>Readline</application> for line editing and
       do not use the command history (see
       <xref linkend="app-psql-readline"/> below).
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-output">
      <term><option>-o <replaceable class="parameter">filename</replaceable></option></term>
      <term><option>--output=<replaceable class="parameter">filename</replaceable></option></term>
      <listitem>
      <para>
      Put all query output into file <replaceable
      class="parameter">filename</replaceable>. This is equivalent to
      the command <command>\o</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-port">
      <term><option>-p <replaceable class="parameter">port</replaceable></option></term>
      <term><option>--port=<replaceable class="parameter">port</replaceable></option></term>
      <listitem>
      <para>
      Specifies the TCP port or the local Unix-domain
      socket file extension on which the server is listening for
      connections. Defaults to the value of the <envar>PGPORT</envar>
      environment variable or, if not set, to the port specified at
      compile time, usually 5432.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-pset">
      <term><option>-P <replaceable class="parameter">assignment</replaceable></option></term>
      <term><option>--pset=<replaceable class="parameter">assignment</replaceable></option></term>
      <listitem>
      <para>
      Specifies printing options, in the style of
      <command>\pset</command>. Note that here you
      have to separate name and value with an equal sign instead of a
      space. For example, to set the output format to <application>LaTeX</application>, you could write
      <literal>-P format=latex</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-quiet">
      <term><option>-q</option></term>
      <term><option>--quiet</option></term>
      <listitem>
      <para>
      Specifies that <application>psql</application> should do its work
      quietly. By default, it prints welcome messages and various
      informational output. If this option is used, none of this
      happens. This is useful with the <option>-c</option> option.
      This is equivalent to setting the variable <varname>QUIET</varname>
      to <literal>on</literal>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-record-separator">
      <term><option>-R <replaceable class="parameter">separator</replaceable></option></term>
      <term><option>--record-separator=<replaceable class="parameter">separator</replaceable></option></term>
      <listitem>
      <para>
      Use <replaceable class="parameter">separator</replaceable> as the
      record separator for unaligned output. This is equivalent to
      <command>\pset recordsep</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-single-step">
      <term><option>-s</option></term>
      <term><option>--single-step</option></term>
      <listitem>
      <para>
      Run in single-step mode. That means the user is prompted before
      each command is sent to the server, with the option to cancel
      execution as well. Use this to debug scripts.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-single-line">
      <term><option>-S</option></term>
      <term><option>--single-line</option></term>
      <listitem>
      <para>
      Runs in single-line mode where a newline terminates an SQL command, as a
      semicolon does.
      </para>

      <note>
      <para>
      This mode is provided for those who insist on it, but you are not
      necessarily encouraged to use it. In particular, if you mix
      <acronym>SQL</acronym> and meta-commands on a line the order of
      execution might not always be clear to the inexperienced user.
      </para>
      </note>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-tuples-only">
      <term><option>-t</option></term>
      <term><option>--tuples-only</option></term>
      <listitem>
      <para>
      Turn off printing of column names and result row count footers,
      etc. This is equivalent to <command>\t</command> or
      <command>\pset tuples_only</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-table-attr">
      <term><option>-T <replaceable class="parameter">table_options</replaceable></option></term>
      <term><option>--table-attr=<replaceable class="parameter">table_options</replaceable></option></term>
      <listitem>
      <para>
      Specifies options to be placed within the
      <acronym>HTML</acronym> <sgmltag>table</sgmltag> tag. See
      <command>\pset tableattr</command> for details.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-username">
      <term><option>-U <replaceable class="parameter">username</replaceable></option></term>
      <term><option>--username=<replaceable class="parameter">username</replaceable></option></term>
      <listitem>
      <para>
      Connect to the database as the user <replaceable
      class="parameter">username</replaceable> instead of the default.
      (You must have permission to do so, of course.)
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-variable">
      <term><option>-v <replaceable class="parameter">assignment</replaceable></option></term>
      <term><option>--set=<replaceable class="parameter">assignment</replaceable></option></term>
      <term><option>--variable=<replaceable class="parameter">assignment</replaceable></option></term>
      <listitem>
      <para>
      Perform a variable assignment, like the <command>\set</command>
      meta-command. Note that you must separate name and value, if
      any, by an equal sign on the command line. To unset a variable,
      leave off the equal sign. To set a variable with an empty value,
      use the equal sign but leave off the value. These assignments are
      done during command line processing, so variables that reflect
      connection state will get overwritten later.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-version">
      <term><option>-V</option></term>
      <term><option>--version</option></term>
      <listitem>
      <para>
      Print the <application>psql</application> version and exit.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-no-password">
     <term><option>-w</option></term>
     <term><option>--no-password</option></term>
     <listitem>
      <para>
       Never issue a password prompt.  If the server requires password
       authentication and a password is not available from other sources
       such as a <filename>.pgpass</filename> file, the connection
       attempt will fail.  This option can be useful in batch jobs and
       scripts where no user is present to enter a password.
      </para>

      <para>
       Note that this option will remain set for the entire session,
       and so it affects uses of the meta-command
       <command>\connect</command> as well as the initial connection attempt.
      </para>
     </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-password">
      <term><option>-W</option></term>
      <term><option>--password</option></term>
      <listitem>
      <para>
       Force <application>psql</application> to prompt for a
       password before connecting to a database, even if the password will
       not be used.
      </para>

      <para>
       If the server requires password authentication and a password is not
       available from other sources such as a <filename>.pgpass</filename>
       file, <application>psql</application> will prompt for a
       password in any case.  However, <application>psql</application>
       will waste a connection attempt finding out that the server wants a
       password.  In some cases it is worth typing <option>-W</option> to avoid
       the extra connection attempt.
      </para>

      <para>
       Note that this option will remain set for the entire session,
       and so it affects uses of the meta-command
       <command>\connect</command> as well as the initial connection attempt.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-expanded">
      <term><option>-x</option></term>
      <term><option>--expanded</option></term>
      <listitem>
      <para>
      Turn on the expanded table formatting mode. This is equivalent to
      <command>\x</command> or <command>\pset expanded</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-no-psqlrc">
      <term><option>-X</option></term>
      <term><option>--no-psqlrc</option></term>
      <listitem>
      <para>
      Do not read the start-up file (neither the system-wide
      <filename>psqlrc</filename> file nor the user's
      <filename>~/.psqlrc</filename> file).
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-field-separator-zero">
      <term><option>-z</option></term>
      <term><option>--field-separator-zero</option></term>
      <listitem>
      <para>
      Set the field separator for unaligned output to a zero byte.  This is
      equivalent to <command>\pset fieldsep_zero</command>.
      </para>
      </listitem>
    </varlistentry>

    <varlistentry id="app-psql-option-record-separator-zero">
      <term><option>-0</option></term>
      <term><option>--record-separator-zero</option></term>
      <listitem>
      <para>
      Set the record separator for unaligned output to a zero byte.  This is
      useful for interfacing, for example, with <literal>xargs -0</literal>.
      This is equivalent to <command>\pset recordsep_zero</command>.
      </para>
      </listitem>
    </varlistentry>

     <varlistentry id="app-psql-option-single-transaction">
      <term><option>-1</option></term>
      <term><option>--single-transaction</option></term>
      <listitem>
       <para>
        This option can only be used in combination with one or more
        <option>-c</option> and/or <option>-f</option> options.  It causes
        <application>psql</application> to issue a <command>BEGIN</command> command
        before the first such option and a <command>COMMIT</command> command after
        the last one, thereby wrapping all the commands into a single
        transaction. If any of the commands fails and the variable
        <varname>ON_ERROR_STOP</varname> was set, a
        <command>ROLLBACK</command> command is sent instead. This ensures that
        either all the commands complete successfully, or no changes are
        applied.
       </para>

       <para>
        If the commands themselves
        contain <command>BEGIN</command>, <command>COMMIT</command>,
        or <command>ROLLBACK</command>, this option will not have the desired
        effects.  Also, if an individual command cannot be executed inside a
        transaction block, specifying this option will cause the whole
        transaction to fail.
       </para>
      </listitem>
     </varlistentry>

    <varlistentry id="app-psql-option-help">
      <term><option>-?</option></term>
      <term><option>--help[=<replaceable class="parameter">topic</replaceable>]</option></term>
      <listitem>
      <para>
      Show help about <application>psql</application> and exit. The optional
      <replaceable class="parameter">topic</replaceable> parameter (defaulting
      to <literal>options</literal>) selects which part of <application>psql</application> is
      explained: <literal>commands</literal> describes <application>psql</application>'s
      backslash commands; <literal>options</literal> describes the command-line
      options that can be passed to <application>psql</application>;
      and <literal>variables</literal> shows help about <application>psql</application> configuration
      variables.
      </para>
      </listitem>
    </varlistentry>

  </variablelist>
 </refsect1>


 <refsect1>
  <title>Exit Status</title>

  <para>
   <application>psql</application> returns 0 to the shell if it
   finished normally, 1 if a fatal error of its own occurs (e.g., out of memory,
   file not found), 2 if the connection to the server went bad
   and the session was not interactive, and 3 if an error occurred in a
   script and the variable <varname>ON_ERROR_STOP</varname> was set.
  </para>
 </refsect1>


 <refsect1>
  <title>Usage</title>

  <refsect2 id="r2-app-psql-connecting">
    <title>Connecting to a Database</title>

    <para>
    <application>psql</application> is a regular
    <productname>PostgreSQL</productname> client application. In order
    to connect to a database you need to know the name of your target
    database, the host name and port number of the server, and what
    database user name you want to connect as. <application>psql</application>
    can be told about those parameters via command line options, namely
    <option>-d</option>, <option>-h</option>, <option>-p</option>, and
    <option>-U</option> respectively. If an argument is found that does
    not belong to any option it will be interpreted as the database name
    (or the database user name, if the database name is already given). Not all
    of these options are required; there are useful defaults. If you omit the host
    name, <application>psql</application> will connect via a Unix-domain socket
    to a server on the local host, or via TCP/IP to <literal>localhost</literal> on
    Windows. The default port number is
    determined at compile time.
    Since the database server uses the same default, you will not have
    to specify the port in most cases. The default database user name is your
    operating-system user name. Once the database user name is determined, it
    is used as the default database name.
    Note that you cannot
    just connect to any database under any database user name. Your database
    administrator should have informed you about your access rights.
    </para>

    <para>
    When the defaults aren't quite right, you can save yourself
    some typing by setting the environment variables
    <envar>PGDATABASE</envar>, <envar>PGHOST</envar>,
    <envar>PGPORT</envar> and/or <envar>PGUSER</envar> to appropriate
    values. (For additional environment variables, see <xref
    linkend="libpq-envars"/>.) It is also convenient to have a
    <filename>~/.pgpass</filename> file to avoid regularly having to type in
    passwords. See <xref linkend="libpq-pgpass"/> for more information.
    </para>

    <para>
     An alternative way to specify connection parameters is in a
     <parameter>conninfo</parameter> string or
     a <acronym>URI</acronym>, which is used instead of a database
     name. This mechanism give you very wide control over the
     connection. For example:
<programlisting>
$ <userinput>psql "service=myservice sslmode=require"</userinput>
$ <userinput>psql postgresql://dbmaster:5433/mydb?sslmode=require</userinput>
</programlisting>
     This way you can also use <acronym>LDAP</acronym> for connection
     parameter lookup as described in <xref linkend="libpq-ldap"/>.
     See <xref linkend="libpq-paramkeywords"/> for more information on all the
     available connection options.
    </para>

    <para>
    If the connection could not be made for any reason (e.g., insufficient
    privileges, server is not running on the targeted host, etc.),
    <application>psql</application> will return an error and terminate.
    </para>

    <para>
     If both standard input and standard output are a
     terminal, then <application>psql</application> sets the client
     encoding to <quote>auto</quote>, which will detect the
     appropriate client encoding from the locale settings
     (<envar>LC_CTYPE</envar> environment variable on Unix systems).
     If this doesn't work out as expected, the client encoding can be
     overridden using the environment
     variable <envar>PGCLIENTENCODING</envar>.
    </para>
  </refsect2>

  <refsect2 id="r2-app-psql-4">
    <title>Entering SQL Commands</title>

    <para>
    In normal operation, <application>psql</application> provides a
    prompt with the name of the database to which
    <application>psql</application> is currently connected, followed by
    the string <literal>=&gt;</literal>. For example:
<programlisting>
$ <userinput>psql testdb</userinput>
psql (&version;)
Type "help" for help.

testdb=&gt;
</programlisting>
    </para>

    <para>
    At the prompt, the user can type in <acronym>SQL</acronym> commands.
    Ordinarily, input lines are sent to the server when a
    command-terminating semicolon is reached. An end of line does not
    terminate a command.  Thus commands can be spread over several lines for
    clarity. If the command was sent and executed without error, the results
    of the command are displayed on the screen.
    </para>

    <para>
    If untrusted users have access to a database that has not adopted a
    <link linkend="ddl-schemas-patterns">secure schema usage pattern</link>,
    begin your session by removing publicly-writable schemas
    from <varname>search_path</varname>.  One can
    add <literal>options=-csearch_path=</literal> to the connection string or
    issue <literal>SELECT pg_catalog.set_config('search_path', '',
    false)</literal> before other SQL commands.  This consideration is not
    specific to <application>psql</application>; it applies to every interface
    for executing arbitrary SQL commands.
    </para>

    <para>
    Whenever a command is executed, <application>psql</application> also polls
    for asynchronous notification events generated by
    <link linkend="sql-listen"><command>LISTEN</command></link> and
    <link linkend="sql-notify"><command>NOTIFY</command></link>.
    </para>

    <para>
    While C-style block comments are passed to the server for
    processing and removal, SQL-standard comments are removed by
    <application>psql</application>.
    </para>
  </refsect2>

  <refsect2 id="app-psql-meta-commands">
    <title>Meta-Commands</title>

    <para>
    Anything you enter in <application>psql</application> that begins
    with an unquoted backslash is a <application>psql</application>
    meta-command that is processed by <application>psql</application>
    itself. These commands make
    <application>psql</application> more useful for administration or
    scripting. Meta-commands are often called slash or backslash commands.
    </para>

    <para>
    The format of a <application>psql</application> command is the backslash,
    followed immediately by a command verb, then any arguments. The arguments
    are separated from the command verb and each other by any number of
    whitespace characters.
    </para>

    <para>
    To include whitespace in an argument you can quote it with
    single quotes. To include a single quote in an argument,
    write two single quotes within single-quoted text.
    Anything contained in single quotes is
    furthermore subject to C-like substitutions for
    <literal>\n</literal> (new line), <literal>\t</literal> (tab),
    <literal>\b</literal> (backspace), <literal>\r</literal> (carriage return),
    <literal>\f</literal> (form feed),
    <literal>\</literal><replaceable>digits</replaceable> (octal), and
    <literal>\x</literal><replaceable>digits</replaceable> (hexadecimal).
    A backslash preceding any other character within single-quoted text
    quotes that single character, whatever it is.
    </para>

    <para>
    If an unquoted colon (<literal>:</literal>) followed by a
    <application>psql</application> variable name appears within an argument, it is
    replaced by the variable's value, as described in <xref
    linkend="app-psql-interpolation"/> below.
    The forms <literal>:'<replaceable>variable_name</replaceable>'</literal> and
    <literal>:"<replaceable>variable_name</replaceable>"</literal> described there
    work as well.
    The <literal>:{?<replaceable>variable_name</replaceable>}</literal> syntax allows
    testing whether a variable is defined. It is substituted by
    TRUE or FALSE.
    Escaping the colon with a backslash protects it from substitution.
    </para>

    <para>
    Within an argument, text that is enclosed in backquotes
    (<literal>`</literal>) is taken as a command line that is passed to the
    shell.  The output of the command (with any trailing newline removed)
    replaces the backquoted text.  Within the text enclosed in backquotes,
    no special quoting or other processing occurs, except that appearances
    of <literal>:<replaceable>variable_name</replaceable></literal> where
    <replaceable>variable_name</replaceable> is a <application>psql</application> variable name
    are replaced by the variable's value.  Also, appearances of
    <literal>:'<replaceable>variable_name</replaceable>'</literal> are replaced by the
    variable's value suitably quoted to become a single shell command
    argument.  (The latter form is almost always preferable, unless you are
    very sure of what is in the variable.)  Because carriage return and line
    feed characters cannot be safely quoted on all platforms, the
    <literal>:'<replaceable>variable_name</replaceable>'</literal> form prints an
    error message and does not substitute the variable value when such
    characters appear in the value.
    </para>

    <para>
    Some commands take an <acronym>SQL</acronym> identifier (such as a
    table name) as argument. These arguments follow the syntax rules
    of <acronym>SQL</acronym>: Unquoted letters are forced to
    lowercase, while double quotes (<literal>"</literal>) protect letters
    from case conversion and allow incorporation of whitespace into
    the identifier.  Within double quotes, paired double quotes reduce
    to a single double quote in the resulting name.  For example,
    <literal>FOO"BAR"BAZ</literal> is interpreted as <literal>fooBARbaz</literal>,
    and <literal>"A weird"" name"</literal> becomes <literal>A weird"
    name</literal>.
    </para>

    <para>
    Parsing for arguments stops at the end of the line, or when another
    unquoted backslash is found.  An unquoted backslash
    is taken as the beginning of a new meta-command. The special
    sequence <literal>\\</literal> (two backslashes) marks the end of
    arguments and continues parsing <acronym>SQL</acronym> commands, if
    any. That way <acronym>SQL</acronym> and
    <application>psql</application> commands can be freely mixed on a
    line. But in any case, the arguments of a meta-command cannot
    continue beyond the end of the line.
    </para>

    <para>
    Many of the meta-commands act on the <firstterm>current query buffer</firstterm>.
    This is simply a buffer holding whatever SQL command text has been typed
    but not yet sent to the server for execution.  This will include previous
    input lines as well as any text appearing before the meta-command on the
    same line.
    </para>

    <para>
    Many of the meta-commands also allow <literal>x</literal> to be appended
    as an option. This will cause the results to be displayed in expanded
    mode, as if <command>\x</command> or <command>\pset expanded</command>
    had been used.
    </para>

    <para>
    The following meta-commands are defined:

    <variablelist>
      <varlistentry id="app-psql-meta-command-a">
        <term><literal>\a</literal></term>
        <listitem>
        <para>
        If the current table output format is unaligned, it is switched to aligned.
        If it is not unaligned, it is set to unaligned. This command is
        kept for backwards compatibility. See <command>\pset</command> for a
        more general solution.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-bind">
       <term><literal>\bind</literal> [ <replaceable class="parameter">parameter</replaceable> ] ... </term>

       <listitem>
        <para>
         Sets query parameters for the next query execution, with the
         specified parameters passed for any parameter placeholders
         (<literal>$1</literal> etc.).
        </para>

        <para>
         Example:
<programlisting>
INSERT INTO tbl1 VALUES ($1, $2) \bind 'first value' 'second value' \g
</programlisting>
        </para>

        <para>
         This also works for query-execution commands besides
         <literal>\g</literal>, such as <literal>\gx</literal> and
         <literal>\gset</literal>.
        </para>

        <para>
         This command causes the extended query protocol (see <xref
         linkend="protocol-query-concepts"/>) to be used, unlike normal
         <application>psql</application> operation, which uses the simple
         query protocol.  So this command can be useful to test the extended
         query protocol from <application>psql</application>.  (The extended
         query protocol is used even if the query has no parameters and this
         command specifies zero parameters.)  This command affects only the
         next query executed; all subsequent queries will use the simple query
         protocol by default.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-bind-named">
       <term><literal>\bind_named</literal> <replaceable class="parameter">statement_name</replaceable> [ <replaceable class="parameter">parameter</replaceable> ] ... </term>

       <listitem>
        <para>
         <literal>\bind_named</literal> is equivalent to <literal>\bind</literal>,
         except that it takes the name of an existing prepared statement as
         first parameter. An empty string denotes the unnamed prepared
         statement.
        </para>

        <para>
         Example:
<programlisting>
INSERT INTO tbls1 VALUES ($1, $2) \parse stmt1
\bind_named stmt1 'first value' 'second value' \g
</programlisting>
        </para>

        <para>
         This command causes the extended query protocol (see
         <xref linkend="protocol-query-concepts"/>) to be used, unlike normal
         <application>psql</application> operation, which uses the simple
         query protocol. So this command can be useful to test the extended
         query protocol from <application>psql</application>.
        </para>

       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-c-lc">
        <term><literal>\c</literal> or <literal>\connect [ -reuse-previous=<replaceable class="parameter">on|off</replaceable> ] [ <replaceable class="parameter">dbname</replaceable> [ <replaceable class="parameter">username</replaceable> ] [ <replaceable class="parameter">host</replaceable> ] [ <replaceable class="parameter">port</replaceable> ] | <replaceable class="parameter">conninfo</replaceable> ]</literal></term>
        <listitem>
        <para>
        Establishes a new connection to a <productname>PostgreSQL</productname>
        server.  The connection parameters to use can be specified either
        using a positional syntax (one or more of database name, user,
        host, and port), or using a <replaceable>conninfo</replaceable>
        connection string as detailed in
        <xref linkend="libpq-connstring"/>.  If no arguments are given, a
        new connection is made using the same parameters as before.
        </para>

        <para>
        Specifying any
        of <replaceable class="parameter">dbname</replaceable>,
        <replaceable class="parameter">username</replaceable>,
        <replaceable class="parameter">host</replaceable> or
        <replaceable class="parameter">port</replaceable>
        as <literal>-</literal> is equivalent to omitting that parameter.
        </para>

        <para>
        The new connection can re-use connection parameters from the previous
        connection; not only database name, user, host, and port, but other
        settings such as <replaceable>sslmode</replaceable>.  By default,
        parameters are re-used in the positional syntax, but not when
        a <replaceable>conninfo</replaceable> string is given.  Passing a
        first argument of <literal>-reuse-previous=on</literal>
        or <literal>-reuse-previous=off</literal> overrides that default.  If
        parameters are re-used, then any parameter not explicitly specified as
        a positional parameter or in the <replaceable>conninfo</replaceable>
        string is taken from the existing connection's parameters.  An
        exception is that if the <replaceable>host</replaceable> setting
        is changed from its previous value using the positional syntax,
        any <replaceable>hostaddr</replaceable> setting present in the
        existing connection's parameters is dropped.
        Also, any password used for the existing connection will be re-used
        only if the user, host, and port settings are not changed.
        When the command neither specifies nor reuses a particular parameter,
        the <application>libpq</application> default is used.
        </para>

        <para>
        If the new connection is successfully made, the previous
        connection is closed.
        If the connection attempt fails (wrong user name, access
        denied, etc.), the previous connection will be kept if
        <application>psql</application> is in interactive mode.  But when
        executing a non-interactive script, the old connection is closed
        and an error is reported.  That may or may not terminate the
        script; if it does not, all database-accessing commands will fail
        until another <literal>\connect</literal> command is successfully
        executed.  This distinction was chosen as
        a user convenience against typos on the one hand, and a safety
        mechanism that scripts are not accidentally acting on the
        wrong database on the other hand.
        Note that whenever a <literal>\connect</literal> command attempts
        to re-use parameters, the values re-used are those of the last
        successful connection, not of any failed attempts made subsequently.
        However, in the case of a
        non-interactive <literal>\connect</literal> failure, no parameters
        are allowed to be re-used later, since the script would likely be
        expecting the values from the failed <literal>\connect</literal>
        to be re-used.
        </para>

        <para>
        Examples:
        </para>
<programlisting>
=&gt; \c mydb myuser host.dom 6432
=&gt; \c service=foo
=&gt; \c "host=localhost port=5432 dbname=mydb connect_timeout=10 sslmode=disable"
=&gt; \c -reuse-previous=on sslmode=require    -- changes only sslmode
=&gt; \c postgresql://tom@localhost/mydb?application_name=myapp
</programlisting>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-c-uc">
        <term><literal>\C [ <replaceable class="parameter">title</replaceable> ]</literal></term>
        <listitem>
        <para>
        Sets the title of any tables being printed as the result of a
        query or unset any such title. This command is equivalent to
        <literal>\pset title <replaceable
        class="parameter">title</replaceable></literal>. (The name of
        this command derives from <quote>caption</quote>, as it was
        previously only used to set the caption in an
        <acronym>HTML</acronym> table.)
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-cd">
       <term><literal>\cd [ <replaceable>directory</replaceable> ]</literal></term>
       <listitem>
        <para>
         Changes the current working directory to
         <replaceable>directory</replaceable>. Without argument, changes
         to the current user's home directory.  For details on how home
         directories are found, see <xref linkend="libpq-pgpass"/>.
        </para>

        <tip>
         <para>
          To print your current working directory, use <literal>\! pwd</literal>.
         </para>
        </tip>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-close-prepared">
       <term><literal>\close_prepared</literal> <replaceable class="parameter">prepared_statement_name</replaceable></term>

       <listitem>
        <para>
         Closes the specified prepared statement. An empty string denotes the
         unnamed prepared statement. If no prepared statement exists with this
         name, the operation is a no-op.
        </para>

        <para>
         Example:
<programlisting>
SELECT $1 \parse stmt1
\close_prepared stmt1
</programlisting>
        </para>

        <para>
         This command causes the extended query protocol to be used,
         unlike normal <application>psql</application> operation, which
         uses the simple query protocol. So this command can be useful
         to test the extended query protocol from
         <application>psql</application>.
        </para>

       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-conninfo">
        <term><literal>\conninfo</literal></term>
        <listitem>
         <para>
          Outputs information about the current database connection,
          including SSL-related information if SSL is in use.
         </para>
         <para>
          Note that the <structfield>Client User</structfield> field shows
          the user at the time of connection, while the
          <structfield>Superuser</structfield> field indicates whether
          the current user (in the current execution context) has
          superuser privileges. These users are usually the same, but they can
          differ, for example, if the current user was changed with the
          <command>SET ROLE</command> command.
         </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-commands-copy">
        <term><literal>\copy { <replaceable class="parameter">table</replaceable> [ ( <replaceable class="parameter">column_list</replaceable> ) ] }
        <literal>from</literal>
        { <replaceable class="parameter">'filename'</replaceable> | program <replaceable class="parameter">'command'</replaceable> | stdin | pstdin }
        [ [ with ] ( <replaceable class="parameter">option</replaceable> [, ...] ) ]
        [ where <replaceable class="parameter">condition</replaceable> ]</literal></term>

        <term><literal>\copy { <replaceable class="parameter">table</replaceable> [ ( <replaceable class="parameter">column_list</replaceable> ) ] | ( <replaceable class="parameter">query</replaceable> ) }
        <literal>to</literal>
        { <replaceable class="parameter">'filename'</replaceable> | program <replaceable class="parameter">'command'</replaceable> | stdout | pstdout }
        [ [ with ] ( <replaceable class="parameter">option</replaceable> [, ...] ) ]</literal></term>

        <listitem>
        <para>
        Performs a frontend (client) copy. This is an operation that
        runs an <acronym>SQL</acronym> <link linkend="sql-copy"><command>COPY</command></link>
        command, but instead of the server
        reading or writing the specified file,
        <application>psql</application> reads or writes the file and
        routes the data between the server and the local file system.
        This means that file accessibility and privileges are those of
        the local user, not the server, and no SQL superuser
        privileges are required.
        </para>

        <para>
        When <literal>program</literal> is specified,
        <replaceable class="parameter">command</replaceable> is
        executed by <application>psql</application> and the data passed from
        or to <replaceable class="parameter">command</replaceable> is
        routed between the server and the client.
        Again, the execution privileges are those of
        the local user, not the server, and no SQL superuser
        privileges are required.
        </para>

        <para>
        For <literal>\copy ... from stdin</literal>, data rows are read from the same
        source that issued the command, continuing until a line containing
        only <literal>\.</literal>
        is read or the stream reaches <acronym>EOF</acronym>. This option is useful
        for populating tables in-line within an SQL script file.
        For <literal>\copy ... to stdout</literal>, output is sent to the same place
        as <application>psql</application> command output, and
        the <literal>COPY <replaceable>count</replaceable></literal> command status is
        not printed (since it might be confused with a data row).
        To read/write <application>psql</application>'s standard input or
        output regardless of the current command source or <literal>\o</literal>
        option, write <literal>from pstdin</literal> or <literal>to pstdout</literal>.
        </para>

        <para>
        The syntax of this command is similar to that of the
        <acronym>SQL</acronym> <link linkend="sql-copy"><command>COPY</command></link>
        command.  All options other than the data source/destination are
        as specified for <command>COPY</command>.
        Because of this, special parsing rules apply to the <command>\copy</command>
        meta-command.  Unlike most other meta-commands, the entire remainder
        of the line is always taken to be the arguments of <command>\copy</command>,
        and neither variable interpolation nor backquote expansion are
        performed in the arguments.
        </para>

        <tip>
        <para>
        Another way to obtain the same result as <literal>\copy
        ... to</literal> is to use the <acronym>SQL</acronym> <literal>COPY
        ... TO STDOUT</literal> command and terminate it
        with <literal>\g <replaceable>filename</replaceable></literal>
        or <literal>\g |<replaceable>program</replaceable></literal>.
        Unlike <literal>\copy</literal>, this method allows the command to
        span multiple lines; also, variable interpolation and backquote
        expansion can be used.
        </para>
        </tip>

        <tip>
        <para>
        These operations are not as efficient as the <acronym>SQL</acronym>
        <command>COPY</command> command with a file or program data source or
        destination, because all data must pass through the client/server
        connection.  For large amounts of data the <acronym>SQL</acronym>
        command might be preferable.
        </para>
        </tip>

        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-copyright">
        <term><literal>\copyright</literal></term>
        <listitem>
        <para>
        Shows the copyright and distribution terms of
        <productname>PostgreSQL</productname>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-commands-crosstabview">
        <term><literal>\crosstabview [
            <replaceable class="parameter">colV</replaceable>
            [ <replaceable class="parameter">colH</replaceable>
            [ <replaceable class="parameter">colD</replaceable>
            [ <replaceable class="parameter">sortcolH</replaceable>
            ] ] ] ] </literal></term>
        <listitem>
        <para>
        Executes the current query buffer (like <literal>\g</literal>) and
        shows the results in a crosstab grid.
        The query must return at least three columns.
        The output column identified by <replaceable class="parameter">colV</replaceable>
        becomes a vertical header and the output column identified by
        <replaceable class="parameter">colH</replaceable>
        becomes a horizontal header.
        <replaceable class="parameter">colD</replaceable> identifies
        the output column to display within the grid.
        <replaceable class="parameter">sortcolH</replaceable> identifies
        an optional sort column for the horizontal header.
        </para>

        <para>
        Each column specification can be a column number (starting at 1) or
        a column name.  The usual SQL case folding and quoting rules apply to
        column names.  If omitted,
        <replaceable class="parameter">colV</replaceable> is taken as column 1
        and <replaceable class="parameter">colH</replaceable> as column 2.
        <replaceable class="parameter">colH</replaceable> must differ from
        <replaceable class="parameter">colV</replaceable>.
        If <replaceable class="parameter">colD</replaceable> is not
        specified, then there must be exactly three columns in the query
        result, and the column that is neither
        <replaceable class="parameter">colV</replaceable> nor
        <replaceable class="parameter">colH</replaceable>
        is taken to be <replaceable class="parameter">colD</replaceable>.
        </para>

        <para>
        The vertical header, displayed as the leftmost column, contains the
        values found in column <replaceable class="parameter">colV</replaceable>, in the
        same order as in the query results, but with duplicates removed.
        </para>

        <para>
        The horizontal header, displayed as the first row, contains the values
        found in column <replaceable class="parameter">colH</replaceable>,
        with duplicates removed.  By default, these appear in the same order
        as in the query results.  But if the
        optional <replaceable class="parameter">sortcolH</replaceable> argument is given,
        it identifies a column whose values must be integer numbers, and the
        values from <replaceable class="parameter">colH</replaceable> will
        appear in the horizontal header sorted according to the
        corresponding <replaceable class="parameter">sortcolH</replaceable> values.
        </para>

        <para>
        Inside the crosstab grid, for each distinct value <literal>x</literal>
        of <replaceable class="parameter">colH</replaceable> and each distinct
        value <literal>y</literal>
        of <replaceable class="parameter">colV</replaceable>, the cell located
        at the intersection <literal>(x,y)</literal> contains the value of
        the <literal>colD</literal> column in the query result row for which
        the value of <replaceable class="parameter">colH</replaceable>
        is <literal>x</literal> and the value
        of <replaceable class="parameter">colV</replaceable>
        is <literal>y</literal>.  If there is no such row, the cell is empty.  If
        there are multiple such rows, an error is reported.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-d">
        <term><literal>\d[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        For each relation (table, view, materialized view, index, property graph, sequence,
        or foreign table)
        or composite type matching the
        <replaceable class="parameter">pattern</replaceable>, show all
        columns, their types, the tablespace (if not the default) and any
        special attributes such as <literal>NOT NULL</literal> or defaults.
        Associated objects, such as indexes, constraints, rules, triggers,
        and publications, are also shown. For foreign tables,
        the associated foreign server is shown as well.
        (<quote>Matching the pattern</quote> is defined in
        <xref linkend="app-psql-patterns"/> below.)
        </para>

        <para>
        For some types of relation, <literal>\d</literal> shows additional information
        for each column: column values for sequences, indexed expressions for
        indexes, and foreign data wrapper options for foreign tables.
        </para>

        <para>
        The command form <literal>\d+</literal> is identical, except that
        more information is displayed: for example, any comments associated
        with the columns of the table, the presence of OIDs in the
        table, the view definition if the relation is a view, a non-default
        <link linkend="sql-altertable-replica-identity">replica
         identity</link> setting and the
        <link linkend="sql-create-access-method">access method</link> name
        if the relation has an access method.
        </para>

        <para>
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        </para>

        <note>
        <para>
        If <command>\d</command> is used without a
        <replaceable class="parameter">pattern</replaceable> argument, it is
        equivalent to <command>\dtvmsEG</command> which will show a list of
        all visible tables, views, materialized views, sequences,
        foreign tables, and property graphs.
        This is purely a convenience measure.
        </para>
        <para>
        As with many other commands, if <literal>x</literal> is appended to
        the command name, the results are displayed in expanded mode, but note
        that this only applies when <command>\d</command> is used without a
        <replaceable class="parameter">pattern</replaceable> argument, and
        the <literal>x</literal> modifier cannot appear immediately after the
        <command>\d</command> (because <command>\dx</command> is a different
        command); the <literal>x</literal> modifier may only appear after an
        <literal>S</literal> or <literal>+</literal> modifier. For example,
        <command>\d+x</command> is equivalent to <command>\dtvmsE+x</command>
        and will show a list of all relations in expanded mode.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-da-lc">
        <term><literal>\da[Sx] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        Lists aggregate functions, together with their
        return type and the data types they operate on. If <replaceable
        class="parameter">pattern</replaceable>
        is specified, only aggregates whose names match the pattern are shown.
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-da-uc">
        <term><literal>\dA[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        Lists access methods. If <replaceable
        class="parameter">pattern</replaceable> is specified, only access
        methods whose names match the pattern are shown.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each access
        method is listed with its associated handler function and description.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dac">
        <term>
          <literal>\dAc[x+]
            [<link linkend="app-psql-patterns"><replaceable class="parameter">access-method-pattern</replaceable></link>
              [<link linkend="app-psql-patterns"><replaceable class="parameter">input-type-pattern</replaceable></link>]]
          </literal>
        </term>
        <listitem>
        <para>
        Lists operator classes
        (see <xref linkend="xindex-opclass"/>).
        If <replaceable class="parameter">access-method-pattern</replaceable>
        is specified, only operator classes associated with access methods whose
        names match that pattern are listed.
        If <replaceable class="parameter">input-type-pattern</replaceable>
        is specified, only operator classes associated with input types whose
        names match that pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each operator
        class is listed with its associated operator family and owner.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-daf">
        <term>
          <literal>\dAf[x+]
            [<link linkend="app-psql-patterns"><replaceable class="parameter">access-method-pattern</replaceable></link>
              [<link linkend="app-psql-patterns"><replaceable class="parameter">input-type-pattern</replaceable></link>]]
          </literal>
        </term>
        <listitem>
        <para>
        Lists operator families
        (see <xref linkend="xindex-opfamily"/>).
        If <replaceable class="parameter">access-method-pattern</replaceable>
        is specified, only operator families associated with access methods whose
        names match that pattern are listed.
        If <replaceable class="parameter">input-type-pattern</replaceable>
        is specified, only operator families associated with input types whose
        names match that pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each operator
        family is listed with its owner.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dao">
        <term>
          <literal>\dAo[x+]
            [<link linkend="app-psql-patterns"><replaceable class="parameter">access-method-pattern</replaceable></link>
              [<link linkend="app-psql-patterns"><replaceable class="parameter">operator-family-pattern</replaceable></link>]]
          </literal>
        </term>

        <listitem>
        <para>
        Lists operators associated with operator families
        (see <xref linkend="xindex-strategies"/>).
        If <replaceable class="parameter">access-method-pattern</replaceable>
        is specified, only members of operator families associated with access
        methods whose names match that pattern are listed.
        If <replaceable class="parameter">operator-family-pattern</replaceable>
        is specified, only members of operator families whose names match that
        pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each operator
        is listed with its sort operator family (if it is an ordering operator),
        and whether its underlying function is leakproof.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dap">
        <term>
          <literal>\dAp[x+]
            [<link linkend="app-psql-patterns"><replaceable class="parameter">access-method-pattern</replaceable></link>
              [<link linkend="app-psql-patterns"><replaceable class="parameter">operator-family-pattern</replaceable></link>]]
          </literal>
        </term>
        <listitem>
        <para>
        Lists support functions associated with operator families
        (see <xref linkend="xindex-support"/>).
        If <replaceable class="parameter">access-method-pattern</replaceable>
        is specified, only functions of operator families associated with
        access methods whose names match that pattern are listed.
        If <replaceable class="parameter">operator-family-pattern</replaceable>
        is specified, only functions of operator families whose names match
        that pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, functions are
        displayed verbosely, with their actual parameter lists.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-db">
        <term><literal>\db[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        Lists tablespaces. If <replaceable
        class="parameter">pattern</replaceable>
        is specified, only tablespaces whose names match the pattern are shown.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each tablespace
        is listed with its associated options, on-disk size, permissions and
        description.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dc-lc">
        <term><literal>\dc[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists conversions between character-set encodings.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only conversions whose names match the pattern are
        listed.
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each object
        is listed with its associated description.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dconfig">
        <term><literal>\dconfig[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists server configuration parameters and their values.
        If <replaceable class="parameter">pattern</replaceable> is specified,
        only parameters whose names match the pattern are listed.  Without
        a <replaceable class="parameter">pattern</replaceable>, only
        parameters that are set to non-default values are listed.
        (Use <literal>\dconfig *</literal> to see all parameters.)
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each
        parameter is listed with its data type, context in which the
        parameter can be set, and access privileges (if non-default access
        privileges have been granted).
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dc-uc">
        <term><literal>\dC[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists type casts.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only casts whose source or target types match the
        pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, additional
        information about each cast is shown, including whether its underlying
        function is leakproof, and the cast's description.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dd-lc">
        <term><literal>\dd[Sx] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Shows the descriptions of objects of type <literal>constraint</literal>,
        <literal>operator class</literal>, <literal>operator family</literal>,
        <literal>rule</literal>, and <literal>trigger</literal>. All
        other comments may be viewed by the respective backslash commands for
        those object types.
        </para>

        <para><literal>\dd</literal> displays descriptions for objects matching the
        <replaceable class="parameter">pattern</replaceable>, or of visible
        objects of the appropriate type if no argument is given.  But in either
        case, only objects that have a description are listed.
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>

        <para>
        Descriptions for objects can be created with the <link
        linkend="sql-comment"><command>COMMENT</command></link>
        <acronym>SQL</acronym> command.
       </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dd-uc">
        <term><literal>\dD[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists domains. If <replaceable
        class="parameter">pattern</replaceable>
        is specified, only domains whose names match the pattern are shown.
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each object
        is listed with its associated permissions and description.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-ddp">
        <term><literal>\ddp[x] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists default access privilege settings.  An entry is shown for
        each role (and schema, if applicable) for which the default
        privilege settings have been changed from the built-in defaults.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only entries whose role name or schema name matches
        the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>

        <para>
        The <link linkend="sql-alterdefaultprivileges"><command>ALTER DEFAULT
        PRIVILEGES</command></link> command is used to set default access
        privileges.  The meaning of the privilege display is explained in
        <xref linkend="ddl-priv"/>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-de">
        <term><literal>\dE[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\dG[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\di[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\dm[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\ds[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\dt[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <term><literal>\dv[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        In this group of commands, the letters <literal>E</literal>, <literal>G</literal>,
        <literal>i</literal>, <literal>m</literal>, <literal>s</literal>,
        <literal>t</literal>, and <literal>v</literal>
        stand for foreign table, index, property graph, materialized view,
        sequence, table, and view,
        respectively.
        You can specify any or all of
        these letters, in any order, to obtain a listing of objects
        of these types.  For example, <literal>\dti</literal> lists
        tables and indexes.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is
        appended to the command name, each object is listed with its
        persistence status (permanent, temporary, or unlogged),
        physical size on disk, and associated description if any.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only objects whose names match the pattern are listed.
        By default, only user-created objects are shown; supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-des">
        <term><literal>\des[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists foreign servers (mnemonic: <quote>external
        servers</quote>).
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only those servers whose name matches the pattern
        are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, a
        full description of each server is shown, including the
        server's access privileges, type, version, options, and description.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-det">
        <term><literal>\det[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists foreign tables (mnemonic: <quote>external tables</quote>).
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only entries whose table name or schema name matches
        the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        generic options and the foreign table description
        are also displayed.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-deu">
        <term><literal>\deu[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists user mappings (mnemonic: <quote>external
        users</quote>).
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only those mappings whose user names match the
        pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        additional information about each mapping is shown.
        </para>

        <caution>
        <para>
        <literal>\deu+</literal> might also display the user name and
        password of the remote user, so care should be taken not to
        disclose them.
        </para>
        </caution>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dew">
        <term><literal>\dew[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists foreign-data wrappers (mnemonic: <quote>external
        wrappers</quote>).
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only those foreign-data wrappers whose name matches
        the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        the access privileges, options, and description of the
        foreign-data wrapper are also shown.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-df-lc">
        <term><literal>\df[anptwSx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> [ <replaceable class="parameter">arg_pattern</replaceable> ... ] ]</literal></term>

        <listitem>
        <para>
        Lists functions, together with their result data types, argument data
        types, and function types, which are classified as <quote>agg</quote>
        (aggregate), <quote>normal</quote>, <quote>procedure</quote>, <quote>trigger</quote>, or <quote>window</quote>.
        To display only functions
        of specific type(s), add the corresponding letters <literal>a</literal>,
        <literal>n</literal>, <literal>p</literal>, <literal>t</literal>, or <literal>w</literal> to the command.
        If <replaceable
        class="parameter">pattern</replaceable> is specified, only
        functions whose names match the pattern are shown.
        Any additional arguments are type-name patterns, which are matched
        to the type names of the first, second, and so on arguments of the
        function.  (Matching functions can have more arguments than what
        you specify.  To prevent that, write a dash <literal>-</literal> as
        the last <replaceable class="parameter">arg_pattern</replaceable>.)
        By default, only user-created
        objects are shown; supply a pattern or the <literal>S</literal>
        modifier to include system objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, additional information
        about each function is shown, including volatility,
        parallel safety, owner, security classification, whether it is
        leakproof, access privileges, language, internal name (for C and
        internal functions only), and description.
        Source code for a specific function can be seen
        using <literal>\sf</literal>.
        </para>

        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-df-uc">
        <term><literal>\dF[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
         Lists text search configurations.
         If <replaceable class="parameter">pattern</replaceable> is specified,
         only configurations whose names match the pattern are shown.
         If <literal>x</literal> is appended to the command name, the results
         are displayed in expanded mode.
         If <literal>+</literal> is appended to the command name, a full description of
         each configuration is shown, including the underlying text search
         parser and the dictionary list for each parser token type.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dfd">
        <term><literal>\dFd[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
         Lists text search dictionaries.
         If <replaceable class="parameter">pattern</replaceable> is specified,
         only dictionaries whose names match the pattern are shown.
         If <literal>x</literal> is appended to the command name, the results
         are displayed in expanded mode.
         If <literal>+</literal> is appended to the command name, additional information
         is shown about each selected dictionary, including the underlying
         text search template and the option values.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dfp">
        <term><literal>\dFp[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
         Lists text search parsers.
         If <replaceable class="parameter">pattern</replaceable> is specified,
         only parsers whose names match the pattern are shown.
         If <literal>x</literal> is appended to the command name, the results
         are displayed in expanded mode.
         If <literal>+</literal> is appended to the command name, a full description of
         each parser is shown, including the underlying functions and the
         list of recognized token types.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dft">
        <term><literal>\dFt[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
         Lists text search templates.
         If <replaceable class="parameter">pattern</replaceable> is specified,
         only templates whose names match the pattern are shown.
         If <literal>x</literal> is appended to the command name, the results
         are displayed in expanded mode.
         If <literal>+</literal> is appended to the command name, additional information
         is shown about each template, including the underlying function names.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dg">
        <term><literal>\dg[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists database roles.
        (Since the concepts of <quote>users</quote> and <quote>groups</quote> have been
        unified into <quote>roles</quote>, this command is now equivalent to
        <literal>\du</literal>.)
        By default, only user-created roles are shown; supply the
        <literal>S</literal> modifier to include system roles.
        If <replaceable class="parameter">pattern</replaceable> is specified,
        only those roles whose names match the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, additional information
        is shown about each role; currently this adds the comment for each
        role.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dl-lc">
        <term><literal>\dl[x+]</literal></term>
        <listitem>
        <para>
        This is an alias for <command>\lo_list</command>, which shows a
        list of large objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        each large object is listed with its associated permissions,
        if any.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dl-uc">
        <term><literal>\dL[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists procedural languages. If <replaceable
        class="parameter">pattern</replaceable>
        is specified, only languages whose names match the pattern are listed.
        By default, only user-created languages
        are shown; supply the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each
        language is listed with its call handler, validator, access privileges,
        and whether it is a system object.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dn">
        <term><literal>\dn[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>

        <listitem>
        <para>
        Lists schemas (namespaces). If <replaceable
        class="parameter">pattern</replaceable>
        is specified, only schemas whose names match the pattern are listed.
        By default, only user-created objects are shown; supply a
        pattern or the <literal>S</literal> modifier to include system objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each object
        is listed with its associated permissions and description, if any.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-do-lc">
        <term><literal>\do[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> [ <replaceable class="parameter">arg_pattern</replaceable> [ <replaceable class="parameter">arg_pattern</replaceable> ] ] ]</literal></term>
        <listitem>
        <para>
        Lists operators with their operand and result types.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only operators whose names match the pattern are listed.
        If one <replaceable class="parameter">arg_pattern</replaceable> is
        specified, only prefix operators whose right argument's type name
        matches that pattern are listed.
        If two <replaceable class="parameter">arg_pattern</replaceable>s
        are specified, only binary operators whose argument type names match
        those patterns are listed.  (Alternatively, write <literal>-</literal>
        for the unused argument of a unary operator.)
        By default, only user-created objects are shown; supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        additional information about each operator is shown, including
        the name of the underlying function, and whether it is leakproof.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-do-uc">
        <term><literal>\dO[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists collations.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only collations whose names match the pattern are
        listed.  By default, only user-created objects are shown;
        supply a pattern or the <literal>S</literal> modifier to
        include system objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended
        to the command name, each collation is listed with its associated
        description, if any.
        Note that only collations usable with the current database's encoding
        are shown, so the results may vary in different databases of the
        same installation.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dp-lc">
        <term><literal>\dp[Sx] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists tables, views and sequences with their
        associated access privileges.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only tables, views and sequences whose names match the
        pattern are listed.  By default only user-created objects are shown;
        supply a pattern or the <literal>S</literal> modifier to include
        system objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>

        <para>
        The <link linkend="sql-grant"><command>GRANT</command></link> and
        <link linkend="sql-revoke"><command>REVOKE</command></link>
        commands are used to set access privileges.  The meaning of the
        privilege display is explained in
        <xref linkend="ddl-priv"/>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-dp-uc">
        <term><literal>\dP[itnx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists partitioned relations.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only entries whose name matches the pattern are listed.
        The modifiers <literal>t</literal> (tables) and <literal>i</literal>
        (indexes) can be appended to the command, filtering the kind of
        relations to list.  By default, partitioned tables and indexes are
        listed.
        </para>

        <para>
        If the modifier <literal>n</literal> (<quote>nested</quote>) is used,
        or a pattern is specified, then non-root partitioned relations are
        included, and a column is shown displaying the parent of each
        partitioned relation.
        </para>

        <para>
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, the sum of the
        sizes of each relation's partitions is also displayed, along with the
        relation's description.
        If <literal>n</literal> is combined with <literal>+</literal>, two
        sizes are shown: one including the total size of directly-attached
        leaf partitions, and another showing the total size of all partitions,
        including indirectly attached sub-partitions.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-drds">
        <term><literal>\drds[x] [ <link linkend="app-psql-patterns"><replaceable class="parameter">role-pattern</replaceable></link> [ <link linkend="app-psql-patterns"><replaceable class="parameter">database-pattern</replaceable></link> ] ]</literal></term>
        <listitem>
        <para>
        Lists defined configuration settings.  These settings can be
        role-specific, database-specific, or both.
        <replaceable>role-pattern</replaceable> and
        <replaceable>database-pattern</replaceable> are used to select
        specific roles and databases to list, respectively.  If omitted, or if
        <literal>*</literal> is specified, all settings are listed, including those
        not role-specific or database-specific, respectively.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>

        <para>
        The <link linkend="sql-alterrole"><command>ALTER ROLE</command></link> and
        <link linkend="sql-alterdatabase"><command>ALTER DATABASE</command></link>
        commands are used to define per-role and per-database configuration
        settings.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-drg">
        <term><literal>\drg[Sx] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists information about each granted role membership, including
        assigned options (<literal>ADMIN</literal>,
        <literal>INHERIT</literal> and/or <literal>SET</literal>) and grantor.
        See the <link linkend="sql-grant"><command>GRANT</command></link>
        command for information about role memberships.
        </para>
        <para>
        By default, only grants to user-created roles are shown; supply the
        <literal>S</literal> modifier to include system roles.
        If <replaceable class="parameter">pattern</replaceable> is specified,
        only grants to those roles whose names match the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-drp">
        <term><literal>\dRp[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists replication publications.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only those publications whose names match the pattern are
        listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, the tables,
        excluded tables, and schemas associated with each publication are shown
        as well.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-drs">
        <term><literal>\dRs[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists replication subscriptions.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only those subscriptions whose names match the pattern are
        listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, additional
        properties of the subscriptions are shown.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dt">
        <term><literal>\dT[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists data types.
        If <replaceable class="parameter">pattern</replaceable> is
        specified, only types whose names match the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each type is
        listed with its internal name and size, its allowed values
        if it is an <type>enum</type> type, and its associated permissions.
        By default, only user-created objects are shown;  supply a
        pattern or the <literal>S</literal> modifier to include system
        objects.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-du">
        <term><literal>\du[Sx+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists database roles.
        (Since the concepts of <quote>users</quote> and <quote>groups</quote> have been
        unified into <quote>roles</quote>, this command is now equivalent to
        <literal>\dg</literal>.)
        By default, only user-created roles are shown; supply the
        <literal>S</literal> modifier to include system roles.
        If <replaceable class="parameter">pattern</replaceable> is specified,
        only those roles whose names match the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, additional information
        is shown about each role; currently this adds the comment for each
        role.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dx-lc">
        <term><literal>\dx[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists installed extensions.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only those extensions whose names match the pattern
        are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, all the objects belonging
        to each matching extension are listed.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dx-uc">
        <term><literal>\dX[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists extended statistics.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only those extended statistics whose names match the
        pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each object
        is listed with its associated description.
        </para>

        <para>
        The status of each kind of extended statistics is shown in a column
        named after its statistic kind (e.g. Ndistinct).
        <literal>defined</literal> means that it was requested when creating
        the statistics, and NULL means it wasn't requested.
        You can use <structname>pg_stats_ext</structname> if you'd like to
        know whether <link linkend="sql-analyze"><command>ANALYZE</command></link>
        was run and statistics are available to the planner.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-dy">
        <term><literal>\dy[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists event triggers.
        If <replaceable class="parameter">pattern</replaceable>
        is specified, only those event triggers whose names match the pattern
        are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, each object
        is listed with its associated description.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-edit">
        <term><literal>\e</literal> or <literal>\edit</literal> <literal> <optional> <replaceable class="parameter">filename</replaceable> </optional> <optional> <replaceable class="parameter">line_number</replaceable> </optional> </literal></term>

        <listitem>
        <para>
        If <replaceable class="parameter">filename</replaceable> is
        specified, the file is edited; after the editor exits, the file's
        content is copied into the current query buffer. If no <replaceable
        class="parameter">filename</replaceable> is given, the current query
        buffer is copied to a temporary file which is then edited in the same
        fashion.  Or, if the current query buffer is empty, the most recently
        executed query is copied to a temporary file and edited in the same
        fashion.
        </para>

        <para>
        If you edit a file or the previous query, and you quit the editor without
        modifying the file, the query buffer is cleared.
        Otherwise, the new contents of the query buffer are re-parsed according to
        the normal rules of <application>psql</application>, treating the
        whole buffer as a single line.  Any complete queries are immediately
        executed; that is, if the query buffer contains or ends with a
        semicolon, everything up to that point is executed and removed from
        the query buffer.  Whatever remains in the query buffer is
        redisplayed.  Type semicolon or <literal>\g</literal> to send it,
        or <literal>\r</literal> to cancel it by clearing the query buffer.
        </para>

        <para>
        Treating the buffer as a single line primarily affects meta-commands:
        whatever is in the buffer after a meta-command will be taken as
        argument(s) to the meta-command, even if it spans multiple lines.
        (Thus you cannot make meta-command-using scripts this way.
        Use <command>\i</command> for that.)
        </para>

        <para>
        If a line number is specified, <application>psql</application> will
        position the cursor on the specified line of the file or query buffer.
        Note that if a single all-digits argument is given,
        <application>psql</application> assumes it is a line number,
        not a file name.
        </para>

        <tip>
        <para>
        See <xref linkend="app-psql-environment"/>, below, for how to
        configure and customize your editor.
        </para>
        </tip>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-echo">
        <term><literal>\echo <replaceable class="parameter">text</replaceable> [ ... ]</literal></term>
        <listitem>
        <para>
        Prints the evaluated arguments to standard output, separated by
        spaces and followed by a newline. This can be useful to
        intersperse information in the output of scripts. For example:
<programlisting>
=&gt; <userinput>\echo `date`</userinput>
Tue Oct 26 21:40:57 CEST 1999
</programlisting>
        If the first argument is an unquoted <literal>-n</literal> the trailing
        newline is not written (nor is the first argument).
        </para>

        <tip>
        <para>
        If you use the <command>\o</command> command to redirect your
        query output you might wish to use <command>\qecho</command>
        instead of this command.  See also <command>\warn</command>.
        </para>
        </tip>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-ef">
        <term><literal>\ef <optional> <replaceable class="parameter">function_description</replaceable> <optional>  <replaceable class="parameter">line_number</replaceable> </optional> </optional> </literal></term>

        <listitem>
        <para>
         This command fetches and edits the definition of the named function or procedure,
         in the form of a <command>CREATE OR REPLACE FUNCTION</command> or
         <command>CREATE OR REPLACE PROCEDURE</command> command.
         Editing is done in the same way as for <literal>\edit</literal>.
         If you quit the editor without saving, the statement is discarded.
         If you save and exit the editor, the updated command is executed immediately
         if you added a semicolon to it.  Otherwise it is redisplayed;
         type semicolon or <literal>\g</literal> to send it, or <literal>\r</literal>
         to cancel.
        </para>

        <para>
         The target function can be specified by name alone, or by name
         and arguments, for example <literal>foo(integer, text)</literal>.
         The argument types must be given if there is more
         than one function of the same name.
        </para>

        <para>
         If no function is specified, a blank <command>CREATE FUNCTION</command>
         template is presented for editing.
        </para>

        <para>
        If a line number is specified, <application>psql</application> will
        position the cursor on the specified line of the function body.
        (Note that the function body typically does not begin on the first
        line of the file.)
        </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\ef</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.
        </para>

        <tip>
        <para>
        See <xref linkend="app-psql-environment"/>, below, for how to
        configure and customize your editor.
        </para>
        </tip>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-encoding">
        <term><literal>\encoding [ <replaceable class="parameter">encoding</replaceable> ]</literal></term>

        <listitem>
        <para>
        Sets the client character set encoding.  Without an argument, this command
        shows the current encoding.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-errverbose">
        <term><literal>\errverbose</literal></term>

        <listitem>
        <para>
        Repeats the most recent server error message at maximum
        verbosity, as though <varname>VERBOSITY</varname> were set
        to <literal>verbose</literal> and <varname>SHOW_CONTEXT</varname> were
        set to <literal>always</literal>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-ev">
        <term><literal>\ev <optional> <replaceable class="parameter">view_name</replaceable> <optional>  <replaceable class="parameter">line_number</replaceable> </optional> </optional> </literal></term>

        <listitem>
        <para>
         This command fetches and edits the definition of the named view,
         in the form of a <command>CREATE OR REPLACE VIEW</command> command.
         Editing is done in the same way as for <literal>\edit</literal>.
         If you quit the editor without saving, the statement is discarded.
         If you save and exit the editor, the updated command is executed immediately
         if you added a semicolon to it.  Otherwise it is redisplayed;
         type semicolon or <literal>\g</literal> to send it, or <literal>\r</literal>
         to cancel.
        </para>

        <para>
         If no view is specified, a blank <command>CREATE VIEW</command>
         template is presented for editing.
        </para>

        <para>
         If a line number is specified, <application>psql</application> will
         position the cursor on the specified line of the view definition.
        </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\ev</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-f">
        <term><literal>\f [ <replaceable class="parameter">string</replaceable> ]</literal></term>

        <listitem>
        <para>
        Sets the field separator for unaligned query output. The default
        is the vertical bar (<literal>|</literal>). It is equivalent to
        <command>\pset fieldsep</command>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-g">
        <term><literal>\g [ (<replaceable class="parameter">option</replaceable>=<replaceable class="parameter">value</replaceable> [...]) ] [ <replaceable class="parameter">filename</replaceable> ]</literal></term>
        <term><literal>\g [ (<replaceable class="parameter">option</replaceable>=<replaceable class="parameter">value</replaceable> [...]) ] [ |<replaceable class="parameter">command</replaceable> ]</literal></term>
        <listitem>
        <para>
        Sends the current query buffer to the server for execution.
        </para>
        <para>
        If parentheses appear after <literal>\g</literal>, they surround a
        space-separated list
        of <replaceable class="parameter">option</replaceable><literal>=</literal><replaceable class="parameter">value</replaceable>
        formatting-option clauses, which are interpreted in the same way
        as <literal>\pset</literal>
        <replaceable class="parameter">option</replaceable>
        <replaceable class="parameter">value</replaceable> commands, but take
        effect only for the duration of this query.  In this list, spaces are
        not allowed around <literal>=</literal> signs, but are required
        between option clauses.
        If <literal>=</literal><replaceable class="parameter">value</replaceable>
        is omitted, the
        named <replaceable class="parameter">option</replaceable> is changed
        in the same way as for
        <literal>\pset</literal> <replaceable class="parameter">option</replaceable>
        with no explicit <replaceable class="parameter">value</replaceable>.
        </para>
        <para>
        If a <replaceable class="parameter">filename</replaceable>
        or <literal>|</literal><replaceable class="parameter">command</replaceable>
        argument is given, the query's output is written to the named
        file or piped to the given shell command, instead of displaying it as
        usual.  The file or command is written to only if the query
        successfully returns zero or more tuples, not if the query fails or
        is a non-data-returning SQL command.
        </para>
        <para>
        If the current query buffer is empty, the most recently sent query is
        re-executed instead.  Except for that behavior, <literal>\g</literal>
        without any arguments is essentially equivalent to a semicolon.
        With arguments, <literal>\g</literal> provides
        a <quote>one-shot</quote> alternative to the <command>\o</command>
        command, and additionally allows one-shot adjustments of the
        output formatting options normally set by <literal>\pset</literal>.
        </para>
        <para>
        When the last argument begins with <literal>|</literal>, the entire
        remainder of the line is taken to be
        the <replaceable class="parameter">command</replaceable> to execute,
        and neither variable interpolation nor backquote expansion are
        performed in it.  The rest of the line is simply passed literally to
        the shell.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-gdesc">
        <term><literal>\gdesc</literal></term>

        <listitem>
        <para>
         Shows the description (that is, the column names and data types)
         of the result of the current query buffer.  The query is not
         actually executed; however, if it contains some type of syntax
         error, that error will be reported in the normal way.
        </para>

        <para>
         If the current query buffer is empty, the most recently sent query
         is described instead.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-getenv">
        <term><literal>\getenv <replaceable class="parameter">psql_var</replaceable> <replaceable class="parameter">env_var</replaceable></literal></term>

        <listitem>
        <para>
         Gets the value of the environment
         variable <replaceable class="parameter">env_var</replaceable>
         and assigns it to the <application>psql</application>
         variable <replaceable class="parameter">psql_var</replaceable>.
         If <replaceable class="parameter">env_var</replaceable> is
         not defined in the <application>psql</application> process's
         environment, <replaceable class="parameter">psql_var</replaceable>
         is not changed.  Example:
<programlisting>
=&gt; <userinput>\getenv home HOME</userinput>
=&gt; <userinput>\echo :home</userinput>
/home/postgres
</programlisting></para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-gexec">
        <term><literal>\gexec</literal></term>

        <listitem>
        <para>
         Sends the current query buffer to the server, then treats
         each column of each row of the query's output (if any) as an SQL
         statement to be executed.  For example, to create an index on each
         column of <structname>my_table</structname>:
<programlisting>
=&gt; <userinput>SELECT format('CREATE INDEX ON my_table (%I)', attname)</userinput>
-&gt; <userinput>FROM pg_attribute</userinput>
-&gt; <userinput>WHERE attrelid = 'my_table'::regclass AND attnum &gt; 0</userinput>
-&gt; <userinput>ORDER BY attnum</userinput>
-&gt; <userinput>\gexec</userinput>
CREATE INDEX
CREATE INDEX
CREATE INDEX
CREATE INDEX
</programlisting>
        </para>

        <para>
         The generated queries are executed in the order in which the rows
         are returned, and left-to-right within each row if there is more
         than one column.  NULL fields are ignored.  The generated queries
         are sent literally to the server for processing, so they cannot be
         <application>psql</application> meta-commands nor contain <application>psql</application>
         variable references.  If any individual query fails, execution of
         the remaining queries continues
         unless <varname>ON_ERROR_STOP</varname> is set.  Execution of each
         query is subject to <varname>ECHO</varname> processing.
         (Setting <varname>ECHO</varname> to <literal>all</literal>
         or <literal>queries</literal> is often advisable when
         using <command>\gexec</command>.)  Query logging, single-step mode,
         timing, and other query execution features apply to each generated
         query as well.
        </para>
        <para>
         If the current query buffer is empty, the most recently sent query
         is re-executed instead.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-gset">
        <term><literal>\gset [ <replaceable class="parameter">prefix</replaceable> ]</literal></term>

        <listitem>
        <para>
         Sends the current query buffer to the server and stores the
         query's output into <application>psql</application> variables
         (see <xref linkend="app-psql-variables"/> below).
         The query to be executed must return exactly one row.  Each column of
         the row is stored into a separate variable, named the same as the
         column.  For example:
<programlisting>
=&gt; <userinput>SELECT 'hello' AS var1, 10 AS var2</userinput>
-&gt; <userinput>\gset</userinput>
=&gt; <userinput>\echo :var1 :var2</userinput>
hello 10
</programlisting>
        </para>
        <para>
         If you specify a <replaceable class="parameter">prefix</replaceable>,
         that string is prepended to the query's column names to create the
         variable names to use:
<programlisting>
=&gt; <userinput>SELECT 'hello' AS var1, 10 AS var2</userinput>
-&gt; <userinput>\gset result_</userinput>
=&gt; <userinput>\echo :result_var1 :result_var2</userinput>
hello 10
</programlisting>
        </para>
        <para>
         If a column result is NULL, the corresponding variable is unset
         rather than being set.
        </para>
        <para>
         If the query fails or does not return one row,
         no variables are changed.
        </para>
        <para>
         If the current query buffer is empty, the most recently sent query
         is re-executed instead.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-gx">
        <term><literal>\gx [ (<replaceable class="parameter">option</replaceable>=<replaceable class="parameter">value</replaceable> [...]) ] [ <replaceable class="parameter">filename</replaceable> ]</literal></term>
        <term><literal>\gx [ (<replaceable class="parameter">option</replaceable>=<replaceable class="parameter">value</replaceable> [...]) ] [ |<replaceable class="parameter">command</replaceable> ]</literal></term>
        <listitem>
        <para>
        <literal>\gx</literal> is equivalent to <literal>\g</literal>, except
        that it forces expanded output mode for this query, as
        if <literal>expanded=on</literal> were included in the list of
        <literal>\pset</literal> options.  See also <literal>\x</literal>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-help">
        <term><literal>\h</literal> or <literal>\help</literal> <literal>[ <replaceable class="parameter">command</replaceable> ]</literal></term>
        <listitem>
        <para>
        Gives syntax help on the specified <acronym>SQL</acronym>
        command. If <replaceable class="parameter">command</replaceable>
        is not specified, then <application>psql</application> will list
        all the commands for which syntax help is available. If
        <replaceable class="parameter">command</replaceable> is an
        asterisk (<literal>*</literal>), then syntax help on all
        <acronym>SQL</acronym> commands is shown.
        </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\help</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.
        </para>

        <note>
        <para>
        To simplify typing, commands that consists of several words do
        not have to be quoted. Thus it is fine to type <userinput>\help
        alter table</userinput>.
        </para>
        </note>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-html">
        <term><literal>\H</literal> or <literal>\html</literal></term>
        <listitem>
        <para>
        Turns on <acronym>HTML</acronym> query output format. If the
        <acronym>HTML</acronym> format is already on, it is switched
        back to the default aligned text format. This command is for
        compatibility and convenience, but see <command>\pset</command>
        about setting other output options.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-include">
        <term><literal>\i</literal> or <literal>\include</literal> <replaceable class="parameter">filename</replaceable></term>
        <listitem>
        <para>
        Reads input from the file <replaceable
        class="parameter">filename</replaceable> and executes it as
        though it had been typed on the keyboard.
        </para>
        <para>
        If <replaceable>filename</replaceable> is <literal>-</literal>
        (hyphen), then standard input is read until an EOF indication
        or <command>\q</command> meta-command.  This can be used to intersperse
        interactive input with input from files.  Note that Readline behavior
        will be used only if it is active at the outermost level.
        </para>
        <note>
        <para>
        If you want to see the lines on the screen as they are read you
        must set the variable <varname>ECHO</varname> to
        <literal>all</literal>.
        </para>
        </note>
        </listitem>
      </varlistentry>


      <varlistentry id="psql-metacommand-if">
        <term><literal>\if</literal> <replaceable class="parameter">expression</replaceable></term>
        <term><literal>\elif</literal> <replaceable class="parameter">expression</replaceable></term>
        <term><literal>\else</literal></term>
        <term><literal>\endif</literal></term>
        <listitem>
        <para>
        This group of commands implements nestable conditional blocks.
        A conditional block must begin with an <command>\if</command> and end
        with an <command>\endif</command>.  In between there may be any number
        of <command>\elif</command> clauses, which may optionally be followed
        by a single <command>\else</command> clause.  Ordinary queries and
        other types of backslash commands may (and usually do) appear between
        the commands forming a conditional block.
        </para>
        <para>
        The <command>\if</command> and <command>\elif</command> commands read
        their argument(s) and evaluate them as a Boolean expression.  If the
        expression yields <literal>true</literal> then processing continues
        normally; otherwise, lines are skipped until a
        matching <command>\elif</command>, <command>\else</command>,
        or <command>\endif</command> is reached.  Once
        an <command>\if</command> or <command>\elif</command> test has
        succeeded, the arguments of later <command>\elif</command> commands in
        the same block are not evaluated but are treated as false.  Lines
        following an <command>\else</command> are processed only if no earlier
        matching <command>\if</command> or <command>\elif</command> succeeded.
        </para>
        <para>
        The <replaceable class="parameter">expression</replaceable> argument
        of an <command>\if</command> or <command>\elif</command> command
        is subject to variable interpolation and backquote expansion, just
        like any other backslash command argument.  After that it is evaluated
        like the value of an on/off option variable.  So a valid value
        is any unambiguous case-insensitive match for one of:
        <literal>true</literal>, <literal>false</literal>, <literal>1</literal>,
        <literal>0</literal>, <literal>on</literal>, <literal>off</literal>,
        <literal>yes</literal>, <literal>no</literal>.  For example,
        <literal>t</literal>, <literal>T</literal>, and <literal>tR</literal>
        will all be considered to be <literal>true</literal>.
        </para>
        <para>
        Expressions that do not properly evaluate to true or false will
        generate a warning and be treated as false.
        </para>
        <para>
        Lines being skipped are parsed normally to identify queries and
        backslash commands, but queries are not sent to the server, and
        backslash commands other than conditionals
        (<command>\if</command>, <command>\elif</command>,
        <command>\else</command>, <command>\endif</command>) are
        ignored.  Conditional commands are checked only for valid nesting.
        Variable references in skipped lines are not expanded, and backquote
        expansion is not performed either.
        </para>
        <para>
        All the backslash commands of a given conditional block must appear in
        the same source file. If EOF is reached on the main input file or an
        <command>\include</command>-ed file before all local
        <command>\if</command>-blocks have been closed,
        then <application>psql</application> will raise an error.
        </para>
        <para>
         Here is an example:
        </para>
<programlisting>
-- check for the existence of two separate records in the database and store
-- the results in separate psql variables
SELECT
    EXISTS (SELECT 1 FROM customer WHERE customer_id = 123) AS is_customer,
    EXISTS (SELECT 1 FROM employee WHERE employee_id = 456) AS is_employee
\gset
\if :is_customer
    SELECT * FROM customer WHERE customer_id = 123;
\elif :is_employee
    \echo 'is not a customer but is an employee'
    SELECT * FROM employee WHERE employee_id = 456;
\else
    \if yes
        \echo 'not a customer or employee'
    \else
        \echo 'this will never print'
    \endif
\endif
</programlisting>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-include-relative">
        <term><literal>\ir</literal> or <literal>\include_relative</literal> <replaceable class="parameter">filename</replaceable></term>
        <listitem>
        <para>
        The <literal>\ir</literal> command is similar to <literal>\i</literal>, but resolves
        relative file names differently.  When executing in interactive mode,
        the two commands behave identically.  However, when invoked from a
        script, <literal>\ir</literal> interprets file names relative to the
        directory in which the script is located, rather than the current
        working directory.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-list">
        <term><literal>\l[x+]</literal> or <literal>\list[x+] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        List the databases in the server and show their names, owners,
        character set encodings, and access privileges.
        If <replaceable class="parameter">pattern</replaceable> is specified,
        only databases whose names match the pattern are listed.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name, database
        sizes, default tablespaces, and descriptions are also displayed.
        Size information is available for databases on which the current user has
        <literal>CONNECT</literal> privilege, or if the current user is a superuser
        or has privileges of the <literal>pg_read_all_stats</literal> role.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-lo-export">
        <term><literal>\lo_export <replaceable class="parameter">loid</replaceable> <replaceable class="parameter">filename</replaceable></literal></term>

        <listitem>
        <para>
        Reads the large object with <acronym>OID</acronym> <replaceable
        class="parameter">loid</replaceable> from the database and
        writes it to <replaceable
        class="parameter">filename</replaceable>. Note that this is
        subtly different from the server function
        <function>lo_export</function>, which acts with the permissions
        of the user that the database server runs as and on the server's
        file system.
        </para>
        <tip>
        <para>
        Use <command>\lo_list</command> to find out the large object's
        <acronym>OID</acronym>.
        </para>
        </tip>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-lo-import">
        <term><literal>\lo_import <replaceable class="parameter">filename</replaceable> [ <replaceable class="parameter">comment</replaceable> ]</literal></term>

        <listitem>
        <para>
        Stores the file into a <productname>PostgreSQL</productname>
        large object. Optionally, it associates the given
        comment with the object. Example:
<programlisting>
foo=&gt; <userinput>\lo_import '/home/peter/pictures/photo.xcf' 'a picture of me'</userinput>
lo_import 152801
</programlisting>
        The response indicates that the large object received object
        ID 152801, which can be used to access the newly-created large
        object in the future. For the sake of readability, it is
        recommended to always associate a human-readable comment with
        every object. Both OIDs and comments can be viewed with the
        <command>\lo_list</command> command.
        </para>

        <para>
        Note that this command is subtly different from the server-side
        <function>lo_import</function> because it acts as the local user
        on the local file system, rather than the server's user and file
        system.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-lo-list">
        <term><literal>\lo_list[x+]</literal></term>
        <listitem>
        <para>
        Shows a list of all <productname>PostgreSQL</productname>
        large objects currently stored in the database,
        along with any comments provided for them.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        If <literal>+</literal> is appended to the command name,
        each large object is listed with its associated permissions,
        if any.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-lo-unlink">
        <term><literal>\lo_unlink <replaceable class="parameter">loid</replaceable></literal></term>

        <listitem>
        <para>
        Deletes the large object with <acronym>OID</acronym>
        <replaceable class="parameter">loid</replaceable> from the
        database.
        </para>

        <tip>
        <para>
        Use <command>\lo_list</command> to find out the large object's
        <acronym>OID</acronym>.
        </para>
        </tip>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-out">
        <term><literal>\o</literal> or <literal>\out [ <replaceable class="parameter">filename</replaceable> ]</literal></term>
        <term><literal>\o</literal> or <literal>\out [ |<replaceable class="parameter">command</replaceable> ]</literal></term>
        <listitem>
        <para>
        Arranges to save future query results to the file <replaceable
        class="parameter">filename</replaceable> or pipe future results
        to the shell command <replaceable
        class="parameter">command</replaceable>. If no argument is
        specified, the query output is reset to the standard output.
        </para>

        <para>
        If the argument begins with <literal>|</literal>, then the entire remainder
        of the line is taken to be
        the <replaceable class="parameter">command</replaceable> to execute,
        and neither variable interpolation nor backquote expansion are
        performed in it.  The rest of the line is simply passed literally to
        the shell.
        </para>

        <para>
        <quote>Query results</quote> includes all tables, command
        responses, and notices obtained from the database server, as
        well as output of various backslash commands that query the
        database (such as <command>\d</command>); but not error
        messages.
        </para>

        <tip>
        <para>
        To intersperse text output in between query results, use
        <command>\qecho</command>.
        </para>
        </tip>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-print">
        <term><literal>\p</literal> or <literal>\print</literal></term>
        <listitem>
        <para>
        Print the current query buffer to the standard output.
        If the current query buffer is empty, the most recently executed query
        is printed instead.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-parse">
        <term><literal>\parse <replaceable class="parameter">statement_name</replaceable></literal></term>
        <listitem>
        <para>
         Creates a prepared statement from the current query buffer, based on
         the name of a destination prepared-statement object. An empty string
         denotes the unnamed prepared statement.
        </para>

        <para>
         Example:
<programlisting>
SELECT $1 \parse stmt1
</programlisting>
        </para>

        <para>
         This command causes the extended query protocol to be used, unlike
         normal <application>psql</application> operation, which uses the
         simple query protocol. A
         <xref linkend="protocol-message-formats-Parse"/>
         message will be issued by this command so it can be useful to
         test the extended query protocol from
         <application>psql</application>. This command affects only the next
         query executed; all subsequent queries will use the simple query
         protocol by default.
        </para>

        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-password">
        <term><literal>\password [ <replaceable class="parameter">username</replaceable> ]</literal></term>
        <listitem>
        <para>
        Changes the password of the specified user (by default, the current
        user).  This command prompts for the new password, encrypts it, and
        sends it to the server as an <command>ALTER ROLE</command> command.  This
        makes sure that the new password does not appear in cleartext in the
        command history, the server log, or elsewhere.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-prompt">
        <term><literal>\prompt [ <replaceable class="parameter">text</replaceable> ] <replaceable class="parameter">name</replaceable></literal></term>
        <listitem>
        <para>
         Prompts the user to supply text, which is assigned to the variable
         <replaceable class="parameter">name</replaceable>.
         An optional prompt string, <replaceable
         class="parameter">text</replaceable>, can be specified.  (For multiword
         prompts, surround the text with single quotes.)
        </para>

        <para>
         By default, <literal>\prompt</literal> uses the terminal for input and
         output.  However, if the <option>-f</option> command line switch was
         used, <literal>\prompt</literal> uses standard input and standard output.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-pset">
        <term><literal>\pset [ <replaceable class="parameter">option</replaceable> [ <replaceable class="parameter">value</replaceable> ] ]</literal></term>

        <listitem>
        <para>
        This command sets options affecting the output of query result tables.
        <replaceable class="parameter">option</replaceable>
        indicates which option is to be set. The semantics of
        <replaceable class="parameter">value</replaceable> vary depending
        on the selected option.  For some options, omitting <replaceable
        class="parameter">value</replaceable> causes the option to be toggled
        or unset, as described under the particular option.  If no such
        behavior is mentioned, then omitting
        <replaceable class="parameter">value</replaceable> just results in
        the current setting being displayed.
        </para>

        <para>
        <command>\pset</command> without any arguments displays the current status
        of all printing options.
        </para>

        <para>
        Adjustable printing options are:
        <variablelist>
          <varlistentry id="app-psql-meta-command-pset-border">
          <term><literal>border</literal></term>
          <listitem>
          <para>
          The <replaceable class="parameter">value</replaceable> must be a
          number. In general, the higher
          the number the more borders and lines the tables will have,
          but details depend on the particular format.
          In <acronym>HTML</acronym> format, this will translate directly
          into the <literal>border=...</literal> attribute.
          In most other formats only values 0 (no border), 1 (internal
          dividing lines), and 2 (table frame) make sense, and values above 2
          will be treated the same as <literal>border = 2</literal>.
          The <literal>latex</literal> and <literal>latex-longtable</literal>
          formats additionally allow a value of 3 to add dividing lines
          between data rows.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-columns">
          <term><literal>columns</literal></term>
          <listitem>
          <para>
          Sets the target width for the <literal>wrapped</literal> format, and also
          the width limit for determining whether output is wide enough to
          require the pager or switch to the vertical display in expanded auto
          mode.
          Zero (the default) causes the target width to be controlled by the
          environment variable <envar>COLUMNS</envar>, or the detected screen width
          if <envar>COLUMNS</envar> is not set.
          In addition, if <literal>columns</literal> is zero then the
          <literal>wrapped</literal> format only affects screen output.
          If <literal>columns</literal> is nonzero then file and pipe output is
          wrapped to that width as well.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-csv-fieldsep">
          <term><literal>csv_fieldsep</literal></term>
          <listitem>
          <para>
          Specifies the field separator to be used in
          <acronym>CSV</acronym> output format.  If the separator character
          appears in a field's value, that field is output within double
          quotes, following standard <acronym>CSV</acronym> rules.
          The default is a comma.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-display-false">
          <term><literal>display_false</literal></term>
          <listitem>
          <para>
          Sets the string to be printed in place of a false value.
          The default is to print <literal>f</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-display-true">
          <term><literal>display_true</literal></term>
          <listitem>
          <para>
          Sets the string to be printed in place of a true value.
          The default is to print <literal>t</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-expanded">
          <term><literal>expanded</literal> (or <literal>x</literal>)</term>
          <listitem>
          <para>
          If <replaceable class="parameter">value</replaceable> is specified it
          must be either <literal>on</literal> or <literal>off</literal>, which
          will enable or disable expanded mode, or <literal>auto</literal>.
          If <replaceable class="parameter">value</replaceable> is omitted the
          command toggles between the on and off settings.  When expanded mode
          is enabled, query results are displayed in two columns, with the
          column name on the left and the data on the right. This mode is
          useful if the data wouldn't fit on the screen in the
          normal <quote>horizontal</quote> mode.  In the auto setting, the
          expanded mode is used whenever the query output has more than one
          column and is wider than the screen; otherwise, the regular mode is
          used.  The auto setting is only
          effective in the aligned and wrapped formats.  In other formats, it
          always behaves as if the expanded mode is off.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-fieldsep">
          <term><literal>fieldsep</literal></term>
          <listitem>
          <para>
          Specifies the field separator to be used in unaligned output
          format. That way one can create, for example, tab-separated
          output, which other programs might prefer. To
          set a tab as field separator, type <literal>\pset fieldsep
          '\t'</literal>. The default field separator is
          <literal>'|'</literal> (a vertical bar).
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-fieldsep-zero">
          <term><literal>fieldsep_zero</literal></term>
          <listitem>
          <para>
          Sets the field separator to use in unaligned output format to a zero
          byte.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-footer">
          <term><literal>footer</literal></term>
          <listitem>
          <para>
          If <replaceable class="parameter">value</replaceable> is specified
          it must be either <literal>on</literal> or <literal>off</literal>
          which will enable or disable display of the table footer
          (the <literal>(<replaceable>n</replaceable> rows)</literal> count).
          If <replaceable class="parameter">value</replaceable> is omitted the
          command toggles footer display on or off.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-format">
          <term><literal>format</literal></term>
          <listitem>
          <para>
          Sets the output format to one of <literal>aligned</literal>,
          <literal>asciidoc</literal>,
          <literal>csv</literal>,
          <literal>html</literal>,
          <literal>latex</literal>,
          <literal>latex-longtable</literal>, <literal>troff-ms</literal>,
          <literal>unaligned</literal>, or <literal>wrapped</literal>.
          Unique abbreviations are allowed.
          </para>

          <para><literal>aligned</literal> format is the standard,
          human-readable, nicely formatted text output; this is the default.
          </para>

          <para><literal>unaligned</literal> format writes all columns of a row on one
          line, separated by the currently active field separator. This
          is useful for creating output that might be intended to be read
          in by other programs, for example, tab-separated or comma-separated
          format.  However, the field separator character is not treated
          specially if it appears in a column's value;
          so <acronym>CSV</acronym> format may be better suited for such
          purposes.
          </para>

          <para><literal>csv</literal> format
          <indexterm>
           <primary>CSV (Comma-Separated Values) format</primary>
           <secondary>in psql</secondary>
          </indexterm>
          writes column values separated by commas, applying the quoting
          rules described in
          <ulink url="https://datatracker.ietf.org/doc/html/rfc4180">RFC 4180</ulink>.
          This output is compatible with the CSV format of the server's
          <command>COPY</command> command.
          A header line with column names is generated unless
          the <literal>tuples_only</literal> parameter is
          <literal>on</literal>. Titles and footers are not printed.
          Each row is terminated by the system-dependent end-of-line character,
          which is typically a single newline (<literal>\n</literal>) for
          Unix-like systems or a carriage return and newline sequence
          (<literal>\r\n</literal>) for Microsoft Windows.
          Field separator characters other than comma can be selected with
          <command>\pset csv_fieldsep</command>.
          </para>

          <para><literal>wrapped</literal> format is like <literal>aligned</literal> but wraps
          wide data values across lines to make the output fit in the target
          column width.  The target width is determined as described under
          the <literal>columns</literal> option.  Note that <application>psql</application> will
          not attempt to wrap column header titles; therefore,
          <literal>wrapped</literal> format behaves the same as <literal>aligned</literal>
          if the total width needed for column headers exceeds the target.
          </para>

          <para>
          The <literal>asciidoc</literal>, <literal>html</literal>,
          <literal>latex</literal>, <literal>latex-longtable</literal>, and
          <literal>troff-ms</literal> formats put out tables that are intended
          to be included in documents using the respective mark-up
          language. They are not complete documents! This might not be
          necessary in <acronym>HTML</acronym>, but in
          <application>LaTeX</application> you must have a complete
          document wrapper.
          The <literal>latex</literal> format
          uses <application>LaTeX</application>'s <literal>tabular</literal>
          environment.
          The <literal>latex-longtable</literal> format
          requires the <application>LaTeX</application>
          <literal>longtable</literal> and <literal>booktabs</literal> packages.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-linestyle">
          <term><literal>linestyle</literal></term>
          <listitem>
          <para>
          Sets the border line drawing style to one
          of <literal>ascii</literal>, <literal>old-ascii</literal>,
          or <literal>unicode</literal>.
          Unique abbreviations are allowed.  (That would mean one
          letter is enough.)
          The default setting is <literal>ascii</literal>.
          This option only affects the <literal>aligned</literal> and
          <literal>wrapped</literal> output formats.
          </para>

          <para><literal>ascii</literal> style uses plain <acronym>ASCII</acronym>
          characters.  Newlines in data are shown using
          a <literal>+</literal> symbol in the right-hand margin.
          When the <literal>wrapped</literal> format wraps data from
          one line to the next without a newline character, a dot
          (<literal>.</literal>) is shown in the right-hand margin of the first line,
          and again in the left-hand margin of the following line.
          </para>

          <para><literal>old-ascii</literal> style uses plain <acronym>ASCII</acronym>
          characters, using the formatting style used
          in <productname>PostgreSQL</productname> 8.4 and earlier.
          Newlines in data are shown using a <literal>:</literal>
          symbol in place of the left-hand column separator.
          When the data is wrapped from one line
          to the next without a newline character, a <literal>;</literal>
          symbol is used in place of the left-hand column separator.
          </para>

          <para><literal>unicode</literal> style uses Unicode box-drawing characters.
          Newlines in data are shown using a carriage return symbol
          in the right-hand margin.  When the data is wrapped from one line
          to the next without a newline character, an ellipsis symbol
          is shown in the right-hand margin of the first line, and
          again in the left-hand margin of the following line.
          </para>

          <para>
          When the <literal>border</literal> setting is greater than zero,
          the <literal>linestyle</literal> option also determines the
          characters with which the border lines are drawn.
          Plain <acronym>ASCII</acronym> characters work everywhere, but
          Unicode characters look nicer on displays that recognize them.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-null">
          <term><literal>null</literal></term>
          <listitem>
          <para>
          Sets the string to be printed in place of a null value.
          The default is to print nothing, which can easily be mistaken for
          an empty string. For example, one might prefer <literal>\pset null
          '(null)'</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-numericlocale">
          <term><literal>numericlocale</literal></term>
          <listitem>
          <para>
          If <replaceable class="parameter">value</replaceable> is specified
          it must be either <literal>on</literal> or <literal>off</literal>
          which will enable or disable display of a locale-specific character
          to separate groups of digits to the left of the decimal marker.
          If <replaceable class="parameter">value</replaceable> is omitted the
          command toggles between regular and locale-specific numeric output.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-pager">
          <term><literal>pager</literal></term>
          <listitem>
          <para>
          Controls use of a pager program for query and <application>psql</application>
          help output.
          When the <literal>pager</literal> option is <literal>off</literal>, the pager
          program is not used. When the <literal>pager</literal> option is
          <literal>on</literal>, the pager is used when appropriate, i.e., when the
          output is to a terminal and will not fit on the screen.
          The <literal>pager</literal> option can also be set to <literal>always</literal>,
          which causes the pager to be used for all terminal output regardless
          of whether it fits on the screen.  <literal>\pset pager</literal>
          without a <replaceable class="parameter">value</replaceable>
          toggles pager use on and off.
          </para>

          <para>
          If the environment variable <envar>PSQL_PAGER</envar>
          or <envar>PAGER</envar> is set, output to be paged is piped to the
          specified program.  Otherwise a platform-dependent default program
          (such as <filename>more</filename>) is used.
          </para>

          <para>
          When using the <literal>\watch</literal> command to execute a query
          repeatedly, the environment variable <envar>PSQL_WATCH_PAGER</envar>
          is used to find the pager program instead, on Unix systems.  This is
          configured separately because it may confuse traditional pagers, but
          can be used to send output to tools that understand
          <application>psql</application>'s output format (such as
          <filename>pspg --stream</filename>).
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-pager-min-lines">
          <term><literal>pager_min_lines</literal></term>
          <listitem>
          <para>
          If <literal>pager_min_lines</literal> is set to a number greater than the
          page height, the pager program will not be called unless there are
          at least this many lines of output to show. The default setting
          is 0.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-recordsep">
          <term><literal>recordsep</literal></term>
          <listitem>
          <para>
          Specifies the record (line) separator to use in unaligned
          output format. The default is a newline character.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-recordsep-zero">
          <term><literal>recordsep_zero</literal></term>
          <listitem>
          <para>
          Sets the record separator to use in unaligned output format to a zero
          byte.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-tableattr">
          <term><literal>tableattr</literal> (or <literal>T</literal>)</term>
          <listitem>
          <para>
          In <acronym>HTML</acronym> format, this specifies attributes
          to be placed inside the <sgmltag>table</sgmltag> tag.  This
          could for example be <literal>cellpadding</literal> or
          <literal>bgcolor</literal>. Note that you probably don't want
          to specify <literal>border</literal> here, as that is already
          taken care of by <literal>\pset border</literal>.
          If no
          <replaceable class="parameter">value</replaceable> is given,
          the table attributes are unset.
          </para>
          <para>
          In <literal>latex-longtable</literal> format, this controls
          the proportional width of each column containing a left-aligned
          data type.  It is specified as a whitespace-separated list of values,
          e.g., <literal>'0.2 0.2 0.6'</literal>.  Unspecified output columns
          use the last specified value.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-title">
          <term><literal>title</literal> (or <literal>C</literal>)</term>
          <listitem>
          <para>
          Sets the table title for any subsequently printed tables. This
          can be used to give your output descriptive tags. If no
          <replaceable class="parameter">value</replaceable> is given,
          the title is unset.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-tuples-only">
          <term><literal>tuples_only</literal> (or <literal>t</literal>)</term>
          <listitem>
          <para>
          If <replaceable class="parameter">value</replaceable> is specified
          it must be either <literal>on</literal> or <literal>off</literal>
          which will enable or disable tuples-only mode.
          If <replaceable class="parameter">value</replaceable> is omitted the
          command toggles between regular and tuples-only output.
          Regular output includes extra information such
          as column headers, titles, and various footers. In tuples-only
          mode, only actual table data is shown.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-unicode-border-linestyle">
          <term><literal>unicode_border_linestyle</literal></term>
          <listitem>
          <para>
          Sets the border drawing style for the <literal>unicode</literal>
          line style to one of <literal>single</literal>
          or <literal>double</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-unicode-column-linestyle">
          <term><literal>unicode_column_linestyle</literal></term>
          <listitem>
          <para>
          Sets the column drawing style for the <literal>unicode</literal>
          line style to one of <literal>single</literal>
          or <literal>double</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-unicode-header-linestyle">
          <term><literal>unicode_header_linestyle</literal></term>
          <listitem>
          <para>
          Sets the header drawing style for the <literal>unicode</literal>
          line style to one of <literal>single</literal>
          or <literal>double</literal>.
          </para>
          </listitem>
          </varlistentry>

          <varlistentry id="app-psql-meta-command-pset-xheader-width">
          <term><literal>xheader_width</literal></term>
          <listitem>
          <para>
           Sets the maximum width of the header for expanded output to one of
           <literal>full</literal> (the default value),
           <literal>column</literal>, <literal>page</literal>, or an
           <replaceable class="parameter">integer value</replaceable>.
          </para>

          <para>
           <literal>full</literal>: the expanded header is not truncated,
           and will be as wide as the widest output line.
          </para>

          <para>
           <literal>column</literal>: truncate the header line to the
           width of the first column.
          </para>

          <para>
           <literal>page</literal>: truncate the header line to the terminal
           width.
          </para>

          <para>
           <replaceable class="parameter">integer value</replaceable>: specify
           the exact maximum width of the header line.
          </para>
          </listitem>
          </varlistentry>
        </variablelist>
        </para>

        <para>
        Illustrations of how these different formats look can be seen in
        <xref linkend="app-psql-examples"/>, below.
        </para>

        <tip>
        <para>
        There are various shortcut commands for <command>\pset</command>. See
        <command>\a</command>, <command>\C</command>, <command>\f</command>,
        <command>\H</command>, <command>\t</command>, <command>\T</command>,
        and <command>\x</command>.
        </para>
        </tip>

        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-quit">
        <term><literal>\q</literal> or <literal>\quit</literal></term>
        <listitem>
        <para>
        Quits the <application>psql</application> program.
        In a script file, only execution of that script is terminated.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-qecho">
        <term><literal>\qecho <replaceable class="parameter">text</replaceable> [ ... ] </literal></term>
        <listitem>
        <para>
        This command is identical to <command>\echo</command> except
        that the output will be written to the query output channel, as
        set by <command>\o</command>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-reset">
        <term><literal>\r</literal> or <literal>\reset</literal></term>
        <listitem>
        <para>
        Resets (clears) the query buffer.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-restrict">
        <term><literal>\restrict <replaceable class="parameter">restrict_key</replaceable></literal></term>
        <listitem>
        <para>
        Enter "restricted" mode with the provided key.  In this mode, the only
        allowed meta-command is <command>\unrestrict</command>, to exit
        restricted mode.  The key may contain only alphanumeric characters.
        </para>
        <para>
        This command is primarily intended for use in plain-text dumps
        generated by <application>pg_dump</application>,
        <application>pg_dumpall</application>, and
        <application>pg_restore</application>, but it may be useful elsewhere.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-s">
        <term><literal>\s [ <replaceable class="parameter">filename</replaceable> ]</literal></term>
        <listitem>
        <para>
        Print <application>psql</application>'s command line history
        to <replaceable class="parameter">filename</replaceable>.
        If <replaceable class="parameter">filename</replaceable> is omitted,
        the history is written to the standard output (using the pager if
        appropriate).  This command is not available
        if <application>psql</application> was built
        without <application>Readline</application> support.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-set">
        <term><literal>\set [ <replaceable class="parameter">name</replaceable> [ <replaceable class="parameter">value</replaceable> [ ... ] ] ]</literal></term>

        <listitem>
        <para>
        Sets the <application>psql</application> variable <replaceable
        class="parameter">name</replaceable> to <replaceable
        class="parameter">value</replaceable>, or if more than one value
        is given, to the concatenation of all of them. If only one
        argument is given, the variable is set to an empty-string value. To
        unset a variable, use the <command>\unset</command> command.
        </para>

        <para><command>\set</command> without any arguments displays the names and values
        of all currently-set <application>psql</application> variables.
        </para>

        <para>
        Valid variable names can contain letters, digits, and
        underscores. See <xref linkend="app-psql-variables"/> below for details.
        Variable names are case-sensitive.
        </para>

        <para>
        Certain variables are special, in that they
        control <application>psql</application>'s behavior or are
        automatically set to reflect connection state.  These variables are
        documented in <xref linkend="app-psql-variables"/>, below.
        </para>

        <note>
        <para>
        This command is unrelated to the <acronym>SQL</acronym>
        command <link linkend="sql-set"><command>SET</command></link>.
        </para>
        </note>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-setenv">
        <term><literal>\setenv <replaceable class="parameter">name</replaceable> [ <replaceable class="parameter">value</replaceable> ]</literal></term>

        <listitem>
        <para>
        Sets the environment variable <replaceable
        class="parameter">name</replaceable> to <replaceable
        class="parameter">value</replaceable>, or if the
        <replaceable class="parameter">value</replaceable> is
        not supplied, unsets the environment variable. Example:
<programlisting>
testdb=&gt; <userinput>\setenv PAGER less</userinput>
testdb=&gt; <userinput>\setenv LESS -imx4F</userinput>
</programlisting></para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-meta-command-sf">
        <term><literal>\sf[+] <replaceable class="parameter">function_description</replaceable> </literal></term>

        <listitem>
        <para>
         This command fetches and shows the definition of the named function or procedure,
         in the form of a <command>CREATE OR REPLACE FUNCTION</command> or
         <command>CREATE OR REPLACE PROCEDURE</command> command.
         The definition is printed to the current query output channel,
         as set by <command>\o</command>.
        </para>

        <para>
         The target function can be specified by name alone, or by name
         and arguments, for example <literal>foo(integer, text)</literal>.
         The argument types must be given if there is more
         than one function of the same name.
        </para>

        <para>
         If <literal>+</literal> is appended to the command name, then the
         output lines are numbered, with the first line of the function body
         being line 1.
        </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\sf</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-sv">
        <term><literal>\sv[+] <replaceable class="parameter">view_name</replaceable> </literal></term>

        <listitem>
         <para>
          This command fetches and shows the definition of the named view,
          in the form of a <command>CREATE OR REPLACE VIEW</command> command.
          The definition is printed to the current query output channel,
          as set by <command>\o</command>.
         </para>

         <para>
          If <literal>+</literal> is appended to the command name, then the
          output lines are numbered from 1.
         </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\sv</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.
        </para>
        </listitem>
      </varlistentry>

     <varlistentry id="app-psql-meta-command-pipeline">
      <term><literal>\startpipeline</literal></term>
      <term><literal>\sendpipeline</literal></term>
      <term><literal>\syncpipeline</literal></term>
      <term><literal>\endpipeline</literal></term>
      <term><literal>\flushrequest</literal></term>
      <term><literal>\flush</literal></term>
      <term><literal>\getresults [ <replaceable class="parameter">number_results</replaceable> ]</literal></term>

      <listitem>
       <para>
        This group of commands implements pipelining of SQL statements.
        A pipeline must begin with a <command>\startpipeline</command>
        and end with an <command>\endpipeline</command>. In between there
        may be any number of <command>\syncpipeline</command> commands,
        which sends a <link linkend="protocol-flow-ext-query">sync message</link>
        without ending the ongoing pipeline and flushing the send buffer.
        In pipeline mode, statements are sent to the server without waiting
        for the results of previous statements.
        See <xref linkend="libpq-pipeline-mode"/> for more details.
       </para>

       <para>
        All queries executed while a pipeline is ongoing use the extended
        query protocol. Queries are appended to the pipeline when ending with
        a semicolon. The meta-commands <literal>\bind</literal>,
        <literal>\bind_named</literal>, <literal>\close_prepared</literal> or
        <literal>\parse</literal> can be used in an ongoing pipeline. While
        a pipeline is ongoing, <literal>\sendpipeline</literal> will append
        the current query buffer to the pipeline. Other meta-commands like
        <literal>\g</literal>, <literal>\gx</literal> or
        <literal>\gdesc</literal> are not allowed in pipeline mode.
       </para>

       <para>
        <command>\flushrequest</command> appends a flush command to the
        pipeline, allowing to read results with
        <command>\getresults</command> without issuing a sync or ending the
        pipeline. <command>\getresults</command> will automatically push
        unsent data to the server. <command>\flush</command> can be used to
        manually push unsent data.
       </para>

       <para>
        <command>\getresults</command> accepts an optional
        <replaceable class="parameter">number_results</replaceable> parameter.
        If provided, only the first
        <replaceable class="parameter">number_results</replaceable> pending
        results will be read. If not provided or <literal>0</literal>, all
        pending results are read.
       </para>

       <para>
        When pipeline mode is active, a dedicated prompt variable is available
        to report the pipeline status.
        See <xref linkend="app-psql-prompting-p-uc"/> for more details
       </para>

       <para>
        <command>COPY</command> is not supported while in pipeline mode.
       </para>

       <para>
        Example:
<programlisting>
\startpipeline
SELECT * FROM pg_class;
SELECT 1 \bind \sendpipeline
\flushrequest
\getresults
\endpipeline
</programlisting>
       </para>

      </listitem>
     </varlistentry>


      <varlistentry id="app-psql-meta-command-t-lc">
        <term><literal>\t</literal></term>
        <listitem>
        <para>
        Toggles the display of output column name headings and row count
        footer. This command is equivalent to <literal>\pset
        tuples_only</literal> and is provided for convenience.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-t-uc">
        <term><literal>\T <replaceable class="parameter">table_options</replaceable></literal></term>
        <listitem>
        <para>
        Specifies attributes to be placed within the
        <sgmltag>table</sgmltag> tag in <acronym>HTML</acronym>
        output format. This command is equivalent to <literal>\pset
        tableattr <replaceable
        class="parameter">table_options</replaceable></literal>.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-timing">
       <term><literal>\timing [ <replaceable class="parameter">on</replaceable> | <replaceable class="parameter">off</replaceable> ]</literal></term>
        <listitem>
        <para>
         With a parameter, turns displaying of how long each SQL statement
         takes on or off.  Without a parameter, toggles the display between
         on and off.  The display is in milliseconds; intervals longer than
         1 second are also shown in minutes:seconds format, with hours and
         days fields added if needed.
        </para>
       </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-unrestrict">
        <term><literal>\unrestrict <replaceable class="parameter">restrict_key</replaceable></literal></term>
        <listitem>
        <para>
        Exit "restricted" mode (i.e., where all other meta-commands are
        blocked), provided the specified key matches the one given to
        <command>\restrict</command> when restricted mode was entered.
        </para>
        <para>
        This command is primarily intended for use in plain-text dumps
        generated by <application>pg_dump</application>,
        <application>pg_dumpall</application>, and
        <application>pg_restore</application>, but it may be useful elsewhere.
        </para>
        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument of <command>\unrestrict</command>, and
        neither variable interpolation nor backquote expansion are performed.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-unset">
        <term><literal>\unset <replaceable class="parameter">name</replaceable></literal></term>

        <listitem>
        <para>
        Unsets (deletes) the <application>psql</application> variable <replaceable
        class="parameter">name</replaceable>.
        </para>

        <para>
        Most variables that control <application>psql</application>'s behavior
        cannot be unset; instead, an <literal>\unset</literal> command is interpreted
        as setting them to their default values.
        See <xref linkend="app-psql-variables"/> below.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-write">
        <term><literal>\w</literal> or <literal>\write</literal> <replaceable class="parameter">filename</replaceable></term>
        <term><literal>\w</literal> or <literal>\write</literal> <literal>|</literal><replaceable class="parameter">command</replaceable></term>
        <listitem>
        <para>
        Writes the current query buffer to the file <replaceable
        class="parameter">filename</replaceable> or pipes it to the shell
        command <replaceable class="parameter">command</replaceable>.
        If the current query buffer is empty, the most recently executed query
        is written instead.
        </para>

        <para>
        If the argument begins with <literal>|</literal>, then the entire remainder
        of the line is taken to be
        the <replaceable class="parameter">command</replaceable> to execute,
        and neither variable interpolation nor backquote expansion are
        performed in it.  The rest of the line is simply passed literally to
        the shell.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-warn">
        <term><literal>\warn <replaceable class="parameter">text</replaceable> [ ... ]</literal></term>
        <listitem>
        <para>
        This command is identical to <command>\echo</command> except
        that the output will be written to <application>psql</application>'s
        standard error channel, rather than standard output.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-watch">
        <term><literal>\watch [ i[nterval]=<replaceable class="parameter">seconds</replaceable> ] [ c[ount]=<replaceable class="parameter">times</replaceable> ] [ m[in_rows]=<replaceable class="parameter">rows</replaceable> ] [ <replaceable class="parameter">seconds</replaceable> ]</literal></term>
        <listitem>
        <para>
        Repeatedly execute the current query buffer (as <literal>\g</literal> does)
        until interrupted, or the query fails, or the execution count limit
        (if given) is reached, or the query no longer returns the minimum number
        of rows. Wait the specified number of seconds (default 2) between executions.
        The default wait can be changed with the variable
        <xref linkend="app-psql-variables-watch-interval"/>.
        For backwards compatibility,
        <replaceable class="parameter">seconds</replaceable> can be specified
        with or without an <literal>interval=</literal> prefix.
        Each query result is
        displayed with a header that includes the <literal>\pset title</literal>
        string (if any), the time as of query start, and the delay interval.
        </para>
        <para>
        If the current query buffer is empty, the most recently sent query
        is re-executed instead.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-x">
        <term><literal>\x [ <replaceable class="parameter">on</replaceable> | <replaceable class="parameter">off</replaceable> | <replaceable class="parameter">auto</replaceable> ]</literal></term>
        <listitem>
        <para>
        Sets or toggles expanded table formatting mode. As such it is equivalent to
        <literal>\pset expanded</literal>.
       </para>
       </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-z">
        <term><literal>\z[Sx] [ <link linkend="app-psql-patterns"><replaceable class="parameter">pattern</replaceable></link> ]</literal></term>
        <listitem>
        <para>
        Lists tables, views and sequences with their
        associated access privileges.
        If a <replaceable class="parameter">pattern</replaceable> is
        specified, only tables, views and sequences whose names match the
        pattern are listed.  By default only user-created objects are shown;
        supply a pattern or the <literal>S</literal> modifier to include
        system objects.
        If <literal>x</literal> is appended to the command name, the results
        are displayed in expanded mode.
        </para>

        <para>
        This is an alias for <command>\dp</command> (<quote>display
        privileges</quote>).
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-exclamation-mark">
        <term><literal>\! [ <replaceable class="parameter">command</replaceable> ]</literal></term>
        <listitem>
        <para>
        With no argument, escapes to a sub-shell; <application>psql</application>
        resumes when the sub-shell exits.  With an argument, executes the
        shell command <replaceable class="parameter">command</replaceable>.
        </para>

        <para>
        Unlike most other meta-commands, the entire remainder of the line is
        always taken to be the argument(s) of <command>\!</command>, and neither
        variable interpolation nor backquote expansion are performed in the
        arguments.  The rest of the line is simply passed literally to the
        shell.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-question-mark">
        <term><literal>\? [ <replaceable class="parameter">topic</replaceable> ]</literal></term>
        <listitem>
        <para>
        Shows help information. The optional
        <replaceable class="parameter">topic</replaceable> parameter
        (defaulting to <literal>commands</literal>) selects which part of <application>psql</application> is
        explained: <literal>commands</literal> describes <application>psql</application>'s
        backslash commands; <literal>options</literal> describes the command-line
        options that can be passed to <application>psql</application>;
        and <literal>variables</literal> shows help about <application>psql</application> configuration
        variables.
        </para>
        </listitem>
      </varlistentry>


      <varlistentry id="app-psql-meta-command-semicolon">
        <term><literal>\;</literal></term>
        <listitem>
        <para>
        Backslash-semicolon is not a meta-command in the same way as the
        preceding commands; rather, it simply causes a semicolon to be
        added to the query buffer without any further processing.
        </para>

        <para>
        Normally, <application>psql</application> will dispatch an SQL command to the
        server as soon as it reaches the command-ending semicolon, even if
        more input remains on the current line.  Thus for example entering
<programlisting>
SELECT 1; SELECT 2; SELECT 3;
</programlisting>
        will result in the three SQL commands being individually sent to
        the server, with each one's results being displayed before
        continuing to the next command.  However, a semicolon entered
        as <literal>\;</literal> will not trigger command processing, so that the
        command before it and the one after are effectively combined and
        sent to the server in one request.  So for example
<programlisting>
SELECT 1\; SELECT 2\; SELECT 3;
</programlisting>
        results in sending the three SQL commands to the server in a single
        request, when the non-backslashed semicolon is reached.
        The server executes such a request as a single transaction,
        unless there are explicit <command>BEGIN</command>/<command>COMMIT</command>
        commands included in the string to divide it into multiple
        transactions.  (See <xref linkend="protocol-flow-multi-statement"/>
        for more details about how the server handles multi-query strings.)
        </para>
        </listitem>
      </varlistentry>

    </variablelist>
  </para>

  <refsect3 id="app-psql-patterns" xreflabel="Patterns">
   <title>Patterns</title>

   <indexterm>
    <primary>patterns</primary>
    <secondary>in psql and pg_dump</secondary>
   </indexterm>

  <para>
   The various <literal>\d</literal> commands accept a <replaceable
   class="parameter">pattern</replaceable> parameter to specify the
   object name(s) to be displayed.  In the simplest case, a pattern
   is just the exact name of the object.  The characters within a
   pattern are normally folded to lower case, just as in SQL names;
   for example, <literal>\dt FOO</literal> will display the table named
   <literal>foo</literal>.  As in SQL names, placing double quotes around
   a pattern stops folding to lower case.  Should you need to include
   an actual double quote character in a pattern, write it as a pair
   of double quotes within a double-quote sequence; again this is in
   accord with the rules for SQL quoted identifiers.  For example,
   <literal>\dt "FOO""BAR"</literal> will display the table named
   <literal>FOO"BAR</literal> (not <literal>foo"bar</literal>).  Unlike the normal
   rules for SQL names, you can put double quotes around just part
   of a pattern, for instance <literal>\dt FOO"FOO"BAR</literal> will display
   the table named <literal>fooFOObar</literal>.
  </para>

  <para>
   Whenever the <replaceable class="parameter">pattern</replaceable> parameter
   is omitted completely, the <literal>\d</literal> commands display all objects
   that are visible in the current schema search path &mdash; this is
   equivalent to using <literal>*</literal> as the pattern.
   (An object is said to be <firstterm>visible</firstterm> if its
   containing schema is in the search path and no object of the same
   kind and name appears earlier in the search path. This is equivalent to the
   statement that the object can be referenced by name without explicit
   schema qualification.)
   To see all objects in the database regardless of visibility,
   use <literal>*.*</literal> as the pattern.
  </para>

  <para>
   Within a pattern, <literal>*</literal> matches any sequence of characters
   (including no characters) and <literal>?</literal> matches any single character.
   (This notation is comparable to Unix shell file name patterns.)
   For example, <literal>\dt int*</literal> displays tables whose names
   begin with <literal>int</literal>.  But within double quotes, <literal>*</literal>
   and <literal>?</literal> lose these special meanings and are just matched
   literally.
  </para>

  <para>
   A relation pattern that contains a dot (<literal>.</literal>) is interpreted as a schema
   name pattern followed by an object name pattern.  For example,
   <literal>\dt foo*.*bar*</literal> displays all tables whose table name
   includes <literal>bar</literal> that are in schemas whose schema name
   starts with <literal>foo</literal>.  When no dot appears, then the pattern
   matches only objects that are visible in the current schema search path.
   Again, a dot within double quotes loses its special meaning and is matched
   literally.  A relation pattern that contains two dots (<literal>.</literal>)
   is interpreted as a database name followed by a schema name pattern followed
   by an object name pattern.  The database name portion will not be treated as
   a pattern and must match the name of the currently connected database, else
   an error will be raised.
  </para>

  <para>
   A schema pattern that contains a dot (<literal>.</literal>) is interpreted
   as a database name followed by a schema name pattern.  For example,
   <literal>\dn mydb.*foo*</literal> displays all schemas whose schema name
   includes <literal>foo</literal>.  The database name portion will not be
   treated as a pattern and must match the name of the currently connected
   database, else an error will be raised.
  </para>

  <para>
   Advanced users can use regular-expression notations such as character
   classes, for example <literal>[0-9]</literal> to match any digit.  All regular
   expression special characters work as specified in
   <xref linkend="posix-syntax-details"/>, except for <literal>.</literal> which
   is taken as a separator as mentioned above, <literal>*</literal> which is
   translated to the regular-expression notation <literal>.*</literal>,
   <literal>?</literal> which is translated to <literal>.</literal>, and
   <literal>$</literal> which is matched literally.  You can emulate
   these pattern characters at need by writing
   <literal>?</literal> for <literal>.</literal>,
   <literal>(<replaceable class="parameter">R</replaceable>+|)</literal> for
   <literal><replaceable class="parameter">R</replaceable>*</literal>, or
   <literal>(<replaceable class="parameter">R</replaceable>|)</literal> for
   <literal><replaceable class="parameter">R</replaceable>?</literal>.
   <literal>$</literal> is not needed as a regular-expression character since
   the pattern must match the whole name, unlike the usual
   interpretation of regular expressions (in other words, <literal>$</literal>
   is automatically appended to your pattern).  Write <literal>*</literal> at the
   beginning and/or end if you don't wish the pattern to be anchored.
   Note that within double quotes, all regular expression special characters
   lose their special meanings and are matched literally.  Also, the regular
   expression special characters are matched literally in operator name
   patterns (i.e., the argument of <literal>\do</literal>).
  </para>
  </refsect3>
 </refsect2>

 <refsect2>
  <title>Advanced Features</title>

   <refsect3 id="app-psql-variables" xreflabel="Variables">
    <title>Variables</title>

    <para>
    <application>psql</application> provides variable substitution
    features similar to common Unix command shells.
    Variables are simply name/value pairs, where the value
    can be any string of any length.  The name must consist of letters
    (including non-Latin letters), digits, and underscores.
    </para>

    <para>
    To set a variable, use the <application>psql</application> meta-command
    <command>\set</command>.  For example,
<programlisting>
testdb=&gt; <userinput>\set foo bar</userinput>
</programlisting>
    sets the variable <literal>foo</literal> to the value
    <literal>bar</literal>. To retrieve the content of the variable, precede
    the name with a colon, for example:
<programlisting>
testdb=&gt; <userinput>\echo :foo</userinput>
bar
</programlisting>
    This works in both regular SQL commands and meta-commands; there is
    more detail in <xref linkend="app-psql-interpolation"/>, below.
    </para>

    <para>
    If you call <command>\set</command> without a second argument, the
    variable is set to an empty-string value. To unset (i.e., delete)
    a variable, use the command <command>\unset</command>.  To show the
    values of all variables, call <command>\set</command> without any argument.
    </para>

    <note>
    <para>
    The arguments of <command>\set</command> are subject to the same
    substitution rules as with other commands. Thus you can construct
    interesting references such as <literal>\set :foo
    'something'</literal> and get <quote>soft links</quote> or
    <quote>variable variables</quote> of <productname>Perl</productname>
    or <productname><acronym>PHP</acronym></productname> fame,
    respectively. Unfortunately (or fortunately?), there is no way to do
    anything useful with these constructs. On the other hand,
    <literal>\set bar :foo</literal> is a perfectly valid way to copy a
    variable.
    </para>
    </note>

    <para>
    A number of these variables are treated specially
    by <application>psql</application>. They represent certain option
    settings that can be changed at run time by altering the value of
    the variable, or in some cases represent changeable state of
    <application>psql</application>.
    By convention, all specially treated variables' names
    consist of all upper-case ASCII letters (and possibly digits and
    underscores). To ensure maximum compatibility in the future, avoid
    using such variable names for your own purposes.
   </para>

   <para>
    Variables that control <application>psql</application>'s behavior
    generally cannot be unset or set to invalid values.  An <literal>\unset</literal>
    command is allowed but is interpreted as setting the variable to its
    default value.  A <literal>\set</literal> command without a second argument is
    interpreted as setting the variable to <literal>on</literal>, for control
    variables that accept that value, and is rejected for others.  Also,
    control variables that accept the values <literal>on</literal>
    and <literal>off</literal> will also accept other common spellings of Boolean
    values, such as <literal>true</literal> and <literal>false</literal>.
   </para>

   <para>
    The specially treated variables are:
   </para>

    <variablelist>
      <varlistentry id="app-psql-variables-autocommit">
      <term>
       <varname>AUTOCOMMIT</varname>
       <indexterm>
        <primary>autocommit</primary>
        <secondary>psql</secondary>
       </indexterm>
      </term>
        <listitem>
        <para>
        When <literal>on</literal> (the default), each SQL command is automatically
        committed upon successful completion.  To postpone commit in this
        mode, you must enter a <command>BEGIN</command> or <command>START
        TRANSACTION</command> SQL command.  When <literal>off</literal> or unset, SQL
        commands are not committed until you explicitly issue
        <command>COMMIT</command> or <command>END</command>.  The autocommit-off
        mode works by issuing an implicit <command>BEGIN</command> for you, just
        before any command that is not already in a transaction block and
        is not itself a <command>BEGIN</command> or other transaction-control
        command, nor a command that cannot be executed inside a transaction
        block (such as <command>VACUUM</command>).
        </para>

        <note>
        <para>
         In autocommit-off mode, you must explicitly abandon any failed
         transaction by entering <command>ABORT</command> or <command>ROLLBACK</command>.
         Also keep in mind that if you exit the session
         without committing, your work will be lost.
        </para>
        </note>

        <note>
        <para>
         The autocommit-on mode is <productname>PostgreSQL</productname>'s traditional
         behavior, but autocommit-off is closer to the SQL spec.  If you
         prefer autocommit-off, you might wish to set it in the system-wide
         <filename>psqlrc</filename> file or your
         <filename>~/.psqlrc</filename> file.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-comp-keyword-case">
        <term><varname>COMP_KEYWORD_CASE</varname></term>
        <listitem>
        <para>
        Determines which letter case to use when completing an SQL key word.
        If set to <literal>lower</literal> or <literal>upper</literal>, the
        completed word will be in lower or upper case, respectively.  If set
        to <literal>preserve-lower</literal>
        or <literal>preserve-upper</literal> (the default), the completed word
        will be in the case of the word already entered, but words being
        completed without anything entered will be in lower or upper case,
        respectively.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-dbname">
        <term><varname>DBNAME</varname></term>
        <listitem>
        <para>
        The name of the database you are currently connected to. This is
        set every time you connect to a database (including program
        start-up), but can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-echo">
        <term><varname>ECHO</varname></term>
        <listitem>
        <para>
        If set to <literal>all</literal>, all nonempty input lines are printed
        to standard output as they are read.  (This does not apply to lines
        read interactively.)  To select this behavior on program
        start-up, use the switch <option>-a</option>. If set to
        <literal>queries</literal>,
        <application>psql</application> prints each query to standard output
        as it is sent to the server. The switch to select this behavior is
        <option>-e</option>. If set to <literal>errors</literal>, then only
        failed queries are displayed on standard error output. The switch
        for this behavior is <option>-b</option>. If set to
        <literal>none</literal> (the default), then no queries are displayed.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-echo-hidden">
        <term><varname>ECHO_HIDDEN</varname></term>
        <listitem>
        <para>
        When this variable is set to <literal>on</literal> and a backslash command
        queries the database, the query is first shown.
        This feature helps you to study
        <productname>PostgreSQL</productname> internals and provide
        similar functionality in your own programs. (To select this behavior
        on program start-up, use the switch <option>-E</option>.)  If you set
        this variable to the value <literal>noexec</literal>, the queries are
        just shown but are not actually sent to the server and executed.
        The default value is <literal>off</literal>.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-encoding">
        <term><varname>ENCODING</varname></term>
        <listitem>
        <para>
        The current client character set encoding.
        This is set every time you connect to a database (including
        program start-up), and when you change the encoding
        with <literal>\encoding</literal>, but it can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-error">
       <term><varname>ERROR</varname></term>
       <listitem>
        <para>
         <literal>true</literal> if the last SQL query failed, <literal>false</literal> if
         it succeeded.  See also <varname>SQLSTATE</varname>.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-fetch-count">
        <term><varname>FETCH_COUNT</varname></term>
        <listitem>
        <para>
        If this variable is set to an integer value greater than zero,
        the results of <command>SELECT</command> queries are fetched
        and displayed in groups of that many rows, rather than the
        default behavior of collecting the entire result set before
        display.  Therefore only a
        limited amount of memory is used, regardless of the size of
        the result set.  Settings of 100 to 1000 are commonly used
        when enabling this feature.
        Keep in mind that when using this feature, a query might
        fail after having already displayed some rows.
        </para>

        <tip>
        <para>
        Although you can use any output format with this feature,
        the default <literal>aligned</literal> format tends to look bad
        because each group of <varname>FETCH_COUNT</varname> rows
        will be formatted separately, leading to varying column
        widths across the row groups.  The other output formats work better.
        </para>
        </tip>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-hide-tableam">
        <term><varname>HIDE_TABLEAM</varname></term>
        <listitem>
        <para>
         If this variable is set to <literal>true</literal>, a table's access
         method details are not displayed. This is mainly useful for
         regression tests.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-hide-toast-compression">
        <term><varname>HIDE_TOAST_COMPRESSION</varname></term>
        <listitem>
        <para>
         If this variable is set to <literal>true</literal>, column
         compression method details are not displayed. This is mainly
         useful for regression tests.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-histcontrol">
        <term><varname>HISTCONTROL</varname></term>
        <listitem>
        <para>
         If this variable is set to <literal>ignorespace</literal>,
         lines which begin with a space are not entered into the history
         list. If set to a value of <literal>ignoredups</literal>, lines
         matching the previous history line are not entered. A value of
         <literal>ignoreboth</literal> combines the two options. If
         set to <literal>none</literal> (the default), all lines
         read in interactive mode are saved on the history list.
        </para>
        <note>
        <para>
        This feature was shamelessly plagiarized from
        <application>Bash</application>.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-histfile">
        <term><varname>HISTFILE</varname></term>
        <listitem>
        <para>
        The file name that will be used to store the history list.  If unset,
        the file name is taken from the <envar>PSQL_HISTORY</envar>
        environment variable.  If that is not set either, the default
        is <filename>~/.psql_history</filename>,
        or <filename>%APPDATA%\postgresql\psql_history</filename> on Windows.
        For example, putting:
<programlisting>
\set HISTFILE ~/.psql_history-:DBNAME
</programlisting>
        in <filename>~/.psqlrc</filename> will cause
        <application>psql</application> to maintain a separate history for
        each database.
        </para>
        <note>
        <para>
        This feature was shamelessly plagiarized from
        <application>Bash</application>.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-histsize">
        <term><varname>HISTSIZE</varname></term>
        <listitem>
        <para>
        The maximum number of commands to store in the command history
        (default 500).  If set to a negative value, no limit is applied.
        </para>
        <note>
        <para>
        This feature was shamelessly plagiarized from
        <application>Bash</application>.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-host">
        <term><varname>HOST</varname></term>
        <listitem>
        <para>
        The database server host you are currently connected to. This is
        set every time you connect to a database (including program
        start-up), but can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-ignoreeof">
        <term><varname>IGNOREEOF</varname></term>
        <listitem>
        <para>
         If set to 1 or less, sending an <acronym>EOF</acronym> character (usually
         <keycombo action="simul"><keycap>Control</keycap><keycap>D</keycap></keycombo>)
         to an interactive session of <application>psql</application>
         will terminate the application.  If set to a larger numeric value,
         that many consecutive <acronym>EOF</acronym> characters must be typed to
         make an interactive session terminate.  If the variable is set to a
         non-numeric value, it is interpreted as 10.  The default is 0.
        </para>
        <note>
        <para>
        This feature was shamelessly plagiarized from
        <application>Bash</application>.
        </para>
        </note>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-lastoid">
        <term><varname>LASTOID</varname></term>
        <listitem>
        <para>
        The value of the last affected OID, as returned from an
        <command>INSERT</command> or <command>\lo_import</command>
        command. This variable is only guaranteed to be valid until
        after the result of the next <acronym>SQL</acronym> command has
        been displayed.
        <productname>PostgreSQL</productname> servers since version 12 do not
        support OID system columns anymore, thus LASTOID will always be 0
        following <command>INSERT</command> when targeting such servers.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-last-error-message">
       <term><varname>LAST_ERROR_MESSAGE</varname></term>
       <term><varname>LAST_ERROR_SQLSTATE</varname></term>
       <listitem>
        <para>
         The primary error message and associated SQLSTATE code for the most
         recent failed query in the current <application>psql</application> session, or
         an empty string and <literal>00000</literal> if no error has occurred in
         the current session.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-on-error-rollback">
      <term>
       <varname>ON_ERROR_ROLLBACK</varname>
       <indexterm>
        <primary>rollback</primary>
        <secondary>psql</secondary>
       </indexterm>
      </term>
        <listitem>
        <para>
        When set to <literal>on</literal>, if a statement in a transaction block
        generates an error, the error is ignored and the transaction
        continues. When set to <literal>interactive</literal>, such errors are only
        ignored in interactive sessions, and not when reading script
        files. When set to <literal>off</literal> (the default), a statement in a
        transaction block that generates an error aborts the entire
        transaction. The error rollback mode works by issuing an
        implicit <command>SAVEPOINT</command> for you, just before each command
        that is in a transaction block, and then rolling back to the
        savepoint if the command fails.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-on-error-stop">
        <term><varname>ON_ERROR_STOP</varname></term>
        <listitem>
        <para>
        By default, command processing continues after an error.  When this
        variable is set to <literal>on</literal>, processing will instead stop
        immediately.  In interactive mode,
        <application>psql</application> will return to the command prompt;
        otherwise, <application>psql</application> will exit, returning
        error code 3 to distinguish this case from fatal error
        conditions, which are reported using error code 1.  In either case,
        any currently running scripts (the top-level script, if any, and any
        other scripts which it may have in invoked) will be terminated
        immediately.  If the top-level command string contained multiple SQL
        commands, processing will stop with the current command.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-pipeline-command-count">
        <term><varname>PIPELINE_COMMAND_COUNT</varname></term>
        <listitem>
        <para>
        The number of commands queued in an ongoing pipeline.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-pipeline-result-count">
        <term><varname>PIPELINE_RESULT_COUNT</varname></term>
        <listitem>
        <para>
        The number of commands of an ongoing pipeline that were followed
        by either a <command>\flushrequest</command> or a
        <command>\syncpipeline</command>, forcing the server to send the
        results. These results can be retrieved with
        <command>\getresults</command>.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-pipeline-sync-count">
        <term><varname>PIPELINE_SYNC_COUNT</varname></term>
        <listitem>
        <para>
        The number of sync messages queued in an ongoing pipeline.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-port">
        <term><varname>PORT</varname></term>
        <listitem>
        <para>
        The database server port to which you are currently connected.
        This is set every time you connect to a database (including
        program start-up), but can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-prompt">
        <term><varname>PROMPT1</varname></term>
        <term><varname>PROMPT2</varname></term>
        <term><varname>PROMPT3</varname></term>
        <listitem>
        <para>
        These specify what the prompts <application>psql</application>
        issues should look like. See <xref
        linkend="app-psql-prompting"/> below.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-quiet">
        <term><varname>QUIET</varname></term>
        <listitem>
        <para>
        Setting this variable to <literal>on</literal> is equivalent to the command
        line option <option>-q</option>. It is probably not too useful in
        interactive mode.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-row-count">
       <term><varname>ROW_COUNT</varname></term>
       <listitem>
        <para>
         The number of rows returned or affected by the last SQL query, or 0
         if the query failed or did not report a row count.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-server-version-name">
        <term><varname>SERVER_VERSION_NAME</varname></term>
        <term><varname>SERVER_VERSION_NUM</varname></term>
        <listitem>
        <para>
        The server's version number as a string, for
        example <literal>9.6.2</literal>, <literal>10.1</literal> or <literal>11beta1</literal>,
        and in numeric form, for
        example <literal>90602</literal> or <literal>100001</literal>.
        These are set every time you connect to a database
        (including program start-up), but can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-service">
        <term><varname>SERVICE</varname></term>
        <listitem>
        <para>
        The service name, if applicable.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-servicefile">
        <term><varname>SERVICEFILE</varname></term>
        <listitem>
        <para>
        The service file name, if applicable.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-shell-error">
       <term><varname>SHELL_ERROR</varname></term>
       <listitem>
        <para>
         <literal>true</literal> if the last shell command
         failed, <literal>false</literal> if it succeeded.
         This applies to shell commands invoked via the <literal>\!</literal>,
         <literal>\g</literal>, <literal>\o</literal>, <literal>\w</literal>,
         and <literal>\copy</literal> meta-commands, as well as backquote
         (<literal>`</literal>) expansion.  Note that
         for <literal>\o</literal>, this variable is updated when the output
         pipe is closed by the next <literal>\o</literal> command.
         See also <varname>SHELL_EXIT_CODE</varname>.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-shell-exit-code">
       <term><varname>SHELL_EXIT_CODE</varname></term>
       <listitem>
        <para>
         The exit status returned by the last shell command.
         0&ndash;127 represent program exit codes, 128&ndash;255
         indicate termination by a signal, and -1 indicates failure
         to launch a program or to collect its exit status.
         This applies to shell commands invoked via the <literal>\!</literal>,
         <literal>\g</literal>, <literal>\o</literal>, <literal>\w</literal>,
         and <literal>\copy</literal> meta-commands, as well as backquote
         (<literal>`</literal>) expansion.  Note that
         for <literal>\o</literal>, this variable is updated when the output
         pipe is closed by the next <literal>\o</literal> command.
         See also <varname>SHELL_ERROR</varname>.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-show-all-results">
        <term><varname>SHOW_ALL_RESULTS</varname></term>
        <listitem>
        <para>
        When this variable is set to <literal>off</literal>, only the last
        result of a combined query (<literal>\;</literal>) is shown instead of
        all of them.  The default is <literal>on</literal>.  The off behavior
        is for compatibility with older versions of
        <application>psql</application>.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-show-context">
        <term><varname>SHOW_CONTEXT</varname></term>
        <listitem>
        <para>
        This variable can be set to the
        values <literal>never</literal>, <literal>errors</literal>, or <literal>always</literal>
        to control whether <literal>CONTEXT</literal> fields are displayed in
        messages from the server. The default is <literal>errors</literal> (meaning
        that context will be shown in error messages, but not in notice or
        warning messages).  This setting has no effect
        when <varname>VERBOSITY</varname> is set to <literal>terse</literal>
        or <literal>sqlstate</literal>.
        (See also <command>\errverbose</command>, for use when you want a verbose
        version of the error you just got.)
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-singleline">
        <term><varname>SINGLELINE</varname></term>
        <listitem>
        <para>
        Setting this variable to <literal>on</literal> is equivalent to the command
        line option <option>-S</option>.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-singlestep">
        <term><varname>SINGLESTEP</varname></term>
        <listitem>
        <para>
        Setting this variable to <literal>on</literal> is equivalent to the command
        line option <option>-s</option>.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-sqlstate">
       <term><varname>SQLSTATE</varname></term>
       <listitem>
        <para>
         The error code (see <xref linkend="errcodes-appendix"/>) associated
         with the last SQL query's failure, or <literal>00000</literal> if it
         succeeded.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-user">
        <term><varname>USER</varname></term>
        <listitem>
        <para>
        The database user you are currently connected as. This is set
        every time you connect to a database (including program
        start-up), but can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-verbosity">
        <term><varname>VERBOSITY</varname></term>
        <listitem>
        <para>
        This variable can be set to the values <literal>default</literal>,
        <literal>verbose</literal>, <literal>terse</literal>,
        or <literal>sqlstate</literal> to control the verbosity of error
        reports.
        (See also <command>\errverbose</command>, for use when you want a verbose
        version of the error you just got.)
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-version">
        <term><varname>VERSION</varname></term>
        <term><varname>VERSION_NAME</varname></term>
        <term><varname>VERSION_NUM</varname></term>
        <listitem>
        <para>
        These variables are set at program start-up to reflect
        <application>psql</application>'s version, respectively as a verbose string,
        a short string (e.g., <literal>9.6.2</literal>, <literal>10.1</literal>,
        or <literal>11beta1</literal>), and a number (e.g., <literal>90602</literal>
        or <literal>100001</literal>).  They can be changed or unset.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-variables-watch-interval">
        <term><varname>WATCH_INTERVAL</varname></term>
        <listitem>
        <para>
        This variable sets the default interval, in seconds, which
        <command>\watch</command> waits between executing the query. The
        default is 2 seconds.  Specifying an interval in the command overrides
        this variable.
        </para>
        </listitem>
      </varlistentry>

    </variablelist>

   </refsect3>

   <refsect3 id="app-psql-interpolation" xreflabel="SQL Interpolation">
    <title><acronym>SQL</acronym> Interpolation</title>

    <para>
    A key feature of <application>psql</application>
    variables is that you can substitute (<quote>interpolate</quote>)
    them into regular <acronym>SQL</acronym> statements, as well as the
    arguments of meta-commands.  Furthermore,
    <application>psql</application> provides facilities for
    ensuring that variable values used as SQL literals and identifiers are
    properly quoted.  The syntax for interpolating a value without
    any quoting is to prepend the variable name with a colon
    (<literal>:</literal>).  For example,
<programlisting>
testdb=&gt; <userinput>\set foo 'my_table'</userinput>
testdb=&gt; <userinput>SELECT * FROM :foo;</userinput>
</programlisting>
    would query the table <structname>my_table</structname>. Note that this
    may be unsafe: the value of the variable is copied literally, so it can
    contain unbalanced quotes, or even backslash commands. You must make sure
    that it makes sense where you put it.
    </para>

    <para>
    When a value is to be used as an SQL literal or identifier, it is
    safest to arrange for it to be quoted.  To quote the value of
    a variable as an SQL literal, write a colon followed by the variable
    name in single quotes.  To quote the value as an SQL identifier, write
    a colon followed by the variable name in double quotes.
    These constructs deal correctly with quotes and other special
    characters embedded within the variable value.
    The previous example would be more safely written this way:
<programlisting>
testdb=&gt; <userinput>\set foo 'my_table'</userinput>
testdb=&gt; <userinput>SELECT * FROM :"foo";</userinput>
</programlisting>
    </para>

    <para>
    Variable interpolation will not be performed within quoted
    <acronym>SQL</acronym> literals and identifiers.  Therefore, a
    construction such as <literal>':foo'</literal> doesn't work to produce a quoted
    literal from a variable's value (and it would be unsafe if it did work,
    since it wouldn't correctly handle quotes embedded in the value).
    </para>

    <para>
    One example use of this mechanism is to
    copy the contents of a file into a table column.
    First load the file into a variable and then interpolate the variable's
    value as a quoted string:
<programlisting>
testdb=&gt; <userinput>\set content `cat my_file.txt`</userinput>
testdb=&gt; <userinput>INSERT INTO my_table VALUES (:'content');</userinput>
</programlisting>
    (Note that this still won't work if <filename>my_file.txt</filename> contains NUL bytes.
    <application>psql</application> does not support embedded NUL bytes in variable values.)
    </para>

    <para>
    Since colons can legally appear in SQL commands, an apparent attempt
    at interpolation (that is, <literal>:name</literal>,
    <literal>:'name'</literal>, or <literal>:"name"</literal>) is not
    replaced unless the named variable is currently set. In any case, you
    can escape a colon with a backslash to protect it from substitution.
    </para>

    <para>
    The <literal>:{?<replaceable>name</replaceable>}</literal> special syntax returns TRUE
    or FALSE depending on whether the variable exists or not, and is thus
    always substituted, unless the colon is backslash-escaped.
    </para>

    <para>
    The colon syntax for variables is standard <acronym>SQL</acronym> for
    embedded query languages, such as <application>ECPG</application>.
    The colon syntaxes for array slices and type casts are
    <productname>PostgreSQL</productname> extensions, which can sometimes
    conflict with the standard usage.  The colon-quote syntax for escaping a
    variable's value as an SQL literal or identifier is a
    <application>psql</application> extension.
    </para>

   </refsect3>

   <refsect3 id="app-psql-prompting" xreflabel="Prompting">
    <title>Prompting</title>

    <para>
    The prompts <application>psql</application> issues can be customized
    to your preference. The three variables <varname>PROMPT1</varname>,
    <varname>PROMPT2</varname>, and <varname>PROMPT3</varname> contain strings
    and special escape sequences that describe the appearance of the
    prompt. Prompt 1 is the normal prompt that is issued when
    <application>psql</application> requests a new command. Prompt 2 is
    issued when more input is expected during command entry, for example
    because the command was not terminated with a semicolon or a quote
    was not closed.
    Prompt 3 is issued when you are running an <acronym>SQL</acronym>
    <command>COPY FROM STDIN</command> command and you need to type in
    a row value on the terminal.
    </para>

    <para>
    The value of the selected prompt variable is printed literally,
    except where a percent sign (<literal>%</literal>) is encountered.
    Depending on the next character, certain other text is substituted
    instead. Defined substitutions are:

    <variablelist>
      <varlistentry id="app-psql-prompting-m-uc">
        <term><literal>%M</literal></term>
        <listitem>
         <para>
          The full host name (with domain name) of the database server,
          or <literal>[local]</literal> if the connection is over a Unix
          domain socket, or
          <literal>[local:<replaceable>/dir/name</replaceable>]</literal>,
          if the Unix domain socket is not at the compiled in default
          location.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-m-lc">
        <term><literal>%m</literal></term>
        <listitem>
         <para>
          The host name of the database server, truncated at the
          first dot, or <literal>[local]</literal> if the connection is
          over a Unix domain socket.
         </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-gt">
        <term><literal>%&gt;</literal></term>
        <listitem><para>The port number at which the database server is listening.</para></listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-n">
        <term><literal>%n</literal></term>
        <listitem>
         <para>
          The database session user name.  (The expansion of this
          value might change during a database session as the result
          of the command <command>SET SESSION
          AUTHORIZATION</command>.)
         </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-S">
       <term><literal>%S</literal></term>
       <listitem>
        <para>
         The current value of <xref linkend="guc-search-path"/>, or
         <literal>?</literal> if connected to a server running
         <productname>PostgreSQL</productname> 17 or older.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-s">
        <term><literal>%s</literal></term>
        <listitem><para>The name of the service.</para></listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-slash">
        <term><literal>%/</literal></term>
        <listitem><para>The name of the current database.</para></listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-tilde">
        <term><literal>%~</literal></term>
        <listitem><para>Like <literal>%/</literal>, but the output is <literal>~</literal>
         (tilde) if the database is your default database.</para></listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-numbersign">
        <term><literal>%#</literal></term>
        <listitem>
         <para>
          If the session user is a database superuser, then a
          <literal>#</literal>, otherwise a <literal>&gt;</literal>.
          (The expansion of this value might change during a database
          session as the result of the command <command>SET SESSION
          AUTHORIZATION</command>.)
         </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-p">
        <term><literal>%p</literal></term>
        <listitem>
         <para>The process ID of the backend currently connected to.</para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-p-uc">
        <term><literal>%P</literal></term>
        <listitem>
        <para>
        Pipeline status: <literal>off</literal> when not in a pipeline,
        <literal>on</literal> when in an ongoing pipeline or
        <literal>abort</literal> when in an aborted pipeline.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-r">
        <term><literal>%R</literal></term>
        <listitem>
        <para>
        In prompt 1 normally <literal>=</literal>,
        but <literal>@</literal> if the session is in an inactive branch of a
        conditional block, or <literal>^</literal> if in single-line mode,
        or <literal>!</literal> if the session is disconnected from the
        database (which can happen if <command>\connect</command> fails).
        In prompt 2 <literal>%R</literal> is replaced by a character that
        depends on why <application>psql</application> expects more input:
        <literal>-</literal> if the command simply wasn't terminated yet,
        but <literal>*</literal> if there is an unfinished
        <literal>/* ... */</literal> comment,
        a single quote if there is an unfinished quoted string,
        a double quote if there is an unfinished quoted identifier,
        a dollar sign if there is an unfinished dollar-quoted string,
        or <literal>(</literal> if there is an unmatched left parenthesis.
        In prompt 3 <literal>%R</literal> doesn't produce anything.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-i">
        <term><literal>%i</literal></term>
        <listitem>
        <para>
        Indicates whether the connected server is running in hot standby mode.
        The value is shown as <literal>standby</literal>, if the server is
        currently in hot standby and reports
        <xref linkend="guc-in-hot-standby"/> as <literal>on</literal>,
        and <literal>primary</literal> otherwise. This is useful when
        connecting to multiple servers to quickly determine the role of
        each connection. A value of <literal>?</literal> is shown
        when connected to a server running
        <productname>PostgreSQL</productname> 13 or older.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-x">
        <term><literal>%x</literal></term>
        <listitem>
        <para>
        Transaction status: an empty string when not in a transaction
        block, or <literal>*</literal> when in a transaction block, or
        <literal>!</literal> when in a failed transaction block, or <literal>?</literal>
        when the transaction state is indeterminate (for example, because
        there is no connection).
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-l">
        <term><literal>%l</literal></term>
        <listitem>
         <para>
          The line number inside the current statement, starting from <literal>1</literal>.
         </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-digits">
        <term><literal>%</literal><replaceable class="parameter">digits</replaceable></term>
        <listitem>
        <para>
        The character with the indicated octal code is substituted.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-name">
        <term><literal>%:</literal><replaceable class="parameter">name</replaceable><literal>:</literal></term>
        <listitem>
        <para>
        The value of the <application>psql</application> variable
        <replaceable class="parameter">name</replaceable>. See
        <xref linkend="app-psql-variables"/>, above, for details.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-command">
        <term><literal>%`</literal><replaceable class="parameter">command</replaceable><literal>`</literal></term>
        <listitem>
        <para>
        The output of <replaceable
        class="parameter">command</replaceable>, similar to ordinary
        <quote>back-tick</quote> substitution.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-square-brackets">
        <term><literal>%[</literal> ... <literal>%]</literal></term>
        <listitem>
         <para>
         Prompts can contain terminal control characters which, for
         example, change the color, background, or style of the prompt
         text, or change the title of the terminal window. In order for
         the line editing features of <application>Readline</application> to work properly, these
         non-printing control characters must be designated as invisible
         by surrounding them with <literal>%[</literal> and
         <literal>%]</literal>. Multiple pairs of these can occur within
         the prompt.  For example:
<programlisting>
testdb=&gt; \set PROMPT1 '%[%033[1;33;40m%]%n@%/%R%[%033[0m%]%# '
</programlisting>
         results in a boldfaced (<literal>1;</literal>) yellow-on-black
         (<literal>33;40</literal>) prompt on VT100-compatible, color-capable
         terminals.
        </para>
        </listitem>
      </varlistentry>

      <varlistentry id="app-psql-prompting-w">
        <term><literal>%w</literal></term>
        <listitem>
        <para>
        Whitespace of the same width as the most recent output of
        <varname>PROMPT1</varname>.  This can be used as a
        <varname>PROMPT2</varname> setting, so that multi-line statements are
        aligned with the first line, but there is no visible secondary prompt.
        </para>
        </listitem>
      </varlistentry>

    </variablelist>

    To insert a percent sign into your prompt, write
    <literal>%%</literal>. The default prompts are
    <literal>'%/%R%x%# '</literal> for prompts 1 and 2, and
    <literal>'&gt;&gt; '</literal> for prompt 3.
    </para>

    <note>
    <para>
    This feature was shamelessly plagiarized from
    <application>tcsh</application>.
    </para>
    </note>

   </refsect3>

   <refsect3 id="app-psql-readline">
    <title>Command-Line Editing</title>

   <indexterm>
    <primary>Readline</primary>
    <secondary>in psql</secondary>
   </indexterm>
   <indexterm>
    <primary>libedit</primary>
    <secondary>in psql</secondary>
   </indexterm>

    <para>
    <application>psql</application> uses
    the <application>Readline</application>
    or <application>libedit</application> library, if available, for
    convenient line editing and retrieval.  The command history is
    automatically saved when <application>psql</application> exits and is
    reloaded when <application>psql</application> starts up.  Type
    up-arrow or control-P to retrieve previous lines.
    </para>

    <para>
    You can also use tab completion to fill in partially-typed keywords
    and SQL object names in many (by no means all) contexts.  For example,
    at the start of a command, typing <literal>ins</literal> and pressing
    TAB will fill in <literal>insert into </literal>.  Then, typing a few
    characters of a table or schema name and pressing <literal>TAB</literal>
    will fill in the unfinished name, or offer a menu of possible completions
    when there's more than one.  (Depending on the library in use, you may need to
    press <literal>TAB</literal> more than once to get a menu.)
    </para>

    <para>
    Tab completion for SQL object names requires sending queries to the
    server to find possible matches.  In some contexts this can interfere
    with other operations.  For example, after <command>BEGIN</command>
    it will be too late to issue <command>SET TRANSACTION ISOLATION
    LEVEL</command> if a tab-completion query is issued in between.
    If you do not want tab completion at all, you
    can turn it off permanently by putting this in a file named
    <filename>.inputrc</filename> in your home directory:
<programlisting>
$if psql
set disable-completion on
$endif
</programlisting>
    (This is not a <application>psql</application> but a
    <application>Readline</application> feature. Read its documentation
    for further details.)
    </para>

    <para>
     The <option>-n</option> (<option>--no-readline</option>) command line
     option can also be useful to disable use
     of <application>Readline</application> for a single run
     of <application>psql</application>.  This prevents tab completion,
     use or recording of command line history, and editing of multi-line
     commands.  It is particularly useful when you need to copy-and-paste
     text that contains <literal>TAB</literal> characters.
    </para>
   </refsect3>
  </refsect2>
 </refsect1>


 <refsect1 id="app-psql-environment" xreflabel="Environment">
  <title>Environment</title>

  <variablelist>

   <varlistentry id="app-psql-environment-columns">
    <term><envar>COLUMNS</envar></term>

    <listitem>
     <para>
      If <literal>\pset columns</literal> is zero, controls the
      width for the <literal>wrapped</literal> format and width for determining
      if wide output requires the pager or should be switched to the
      vertical format in expanded auto mode.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-pgdatabase">
    <term><envar>PGDATABASE</envar></term>
    <term><envar>PGHOST</envar></term>
    <term><envar>PGPORT</envar></term>
    <term><envar>PGUSER</envar></term>

    <listitem>
     <para>
      Default connection parameters (see <xref linkend="libpq-envars"/>).
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-pg-color">
    <term><envar>PG_COLOR</envar></term>
    <listitem>
     <para>
      Specifies whether to use color in diagnostic messages. Possible values
      are <literal>always</literal>, <literal>auto</literal> and
      <literal>never</literal>.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-psql-editor">
    <term><envar>PSQL_EDITOR</envar></term>
    <term><envar>EDITOR</envar></term>
    <term><envar>VISUAL</envar></term>

    <listitem>
     <para>
      Editor used by the <command>\e</command>, <command>\ef</command>,
      and <command>\ev</command> commands.
      These variables are examined in the order listed;
      the first that is set is used.
      If none of them is set, the default is to use <filename>vi</filename>
      on Unix systems or <filename>notepad.exe</filename> on Windows systems.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-psql-editor-linenumber-arg">
    <term><envar>PSQL_EDITOR_LINENUMBER_ARG</envar></term>

    <listitem>
     <para>
      When <command>\e</command>, <command>\ef</command>, or
      <command>\ev</command> is used
      with a line number argument, this variable specifies the
      command-line argument used to pass the starting line number to
      the user's editor.  For editors such as <productname>Emacs</productname> or
      <productname>vi</productname>, this is a plus sign.  Include a trailing
      space in the value of the variable if there needs to be space
      between the option name and the line number.  Examples:
<programlisting>
PSQL_EDITOR_LINENUMBER_ARG='+'
PSQL_EDITOR_LINENUMBER_ARG='--line '
</programlisting>
     </para>

     <para>
      The default is <literal>+</literal> on Unix systems
      (corresponding to the default editor <filename>vi</filename>,
      and useful for many other common editors); but there is no
      default on Windows systems.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-psql-history">
    <term><envar>PSQL_HISTORY</envar></term>

    <listitem>
     <para>
      Alternative location for the command history file. Tilde (<literal>~</literal>) expansion is performed.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-pager">
    <term><envar>PSQL_PAGER</envar></term>
    <term><envar>PAGER</envar></term>

    <listitem>
     <para>
      If a query's results do not fit on the screen, they are piped
      through this command. Typical values are <literal>more</literal>
      or <literal>less</literal>.
      Use of the pager can be disabled by setting <envar>PSQL_PAGER</envar>
      or <envar>PAGER</envar> to an empty string, or by adjusting the
      pager-related options of the <command>\pset</command> command.
      These variables are examined in the order listed;
      the first that is set is used.
      If neither of them is set, the default is to use <literal>more</literal> on most
      platforms, but <literal>less</literal> on Cygwin.
     </para>

    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-psql-watch-pager">
    <term><envar>PSQL_WATCH_PAGER</envar></term>

    <listitem>
     <para>
      When a query is executed repeatedly with the <command>\watch</command>
      command, a pager is not used by default.  This behavior can be changed
      by setting <envar>PSQL_WATCH_PAGER</envar> to a pager command, on Unix
      systems.  The <literal>pspg</literal> pager (not part of
      <productname>PostgreSQL</productname> but available in many open source
      software distributions) can display the output of
      <command>\watch</command> if started with the option
      <literal>--stream</literal>.
     </para>

    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-psqlrc">
    <term><envar>PSQLRC</envar></term>

    <listitem>
     <para>
      Alternative location of the user's <filename>.psqlrc</filename> file. Tilde (<literal>~</literal>) expansion is performed.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-shell">
    <term><envar>SHELL</envar></term>

    <listitem>
     <para>
      Command executed by the <command>\!</command> command.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry id="app-psql-environment-tmpdir">
    <term><envar>TMPDIR</envar></term>

    <listitem>
     <para>
      Directory for storing temporary files.  The default is
      <filename>/tmp</filename>.
     </para>
    </listitem>
   </varlistentry>
  </variablelist>

  <para>
   This utility, like most other <productname>PostgreSQL</productname> utilities,
   also uses the environment variables supported by <application>libpq</application>
   (see <xref linkend="libpq-envars"/>).
  </para>

 </refsect1>


 <refsect1>
  <title>Files</title>

 <variablelist>
  <varlistentry id="app-psql-files-psqlrc">
   <term><filename>psqlrc</filename> and <filename>~/.psqlrc</filename></term>
   <listitem>
    <para>
     Unless it is passed an <option>-X</option> option,
     <application>psql</application> attempts to read and execute commands
     from the system-wide startup file (<filename>psqlrc</filename>) and then
     the user's personal startup file (<filename>~/.psqlrc</filename>), after
     connecting to the database but before accepting normal commands.
     These files can be used to set up the client and/or the server to taste,
     typically with <command>\set</command> and <command>SET</command>
     commands.
    </para>
    <para>
     The system-wide startup file is named <filename>psqlrc</filename>.
     By default it is
     sought in the installation's <quote>system configuration</quote> directory,
     which is most reliably identified by running <literal>pg_config
     --sysconfdir</literal>.
     Typically this directory will be <filename>../etc/</filename>
     relative to the directory containing
     the <productname>PostgreSQL</productname> executables.
     The directory to look in can be set explicitly via
     the <envar>PGSYSCONFDIR</envar> environment variable.
    </para>
    <para>
     The user's personal startup file is named <filename>.psqlrc</filename>
     and is sought in the invoking user's home directory.
     On Windows the personal startup file is instead named
     <filename>%APPDATA%\postgresql\psqlrc.conf</filename>.
     In either case, this default file path can be overridden by setting
     the <envar>PSQLRC</envar> environment variable.
    </para>
    <para>
     Both the system-wide startup file and the user's personal startup file
     can be made <application>psql</application>-version-specific
     by appending a dash and the <productname>PostgreSQL</productname>
     major or minor release identifier to the file name,
     for example <filename>~/.psqlrc-&majorversion;</filename> or
     <filename>~/.psqlrc-&version;</filename>.
     The most specific version-matching file will be read in preference
     to a non-version-specific file.
     These version suffixes are added after determining the file path
     as explained above.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry id="app-psql-files-psql-history">
   <term><filename>.psql_history</filename></term>
   <listitem>
    <para>
     The command-line history is stored in the file
     <filename>~/.psql_history</filename>, or
     <filename>%APPDATA%\postgresql\psql_history</filename> on Windows.
    </para>
    <para>
     The location of the history file can be set explicitly via
     the <varname>HISTFILE</varname> <application>psql</application> variable or
     the <envar>PSQL_HISTORY</envar> environment variable.
    </para>
   </listitem>
  </varlistentry>
 </variablelist>
 </refsect1>


 <refsect1>
  <title>Notes</title>

    <itemizedlist>
      <listitem>
      <para><application>psql</application> works best with servers of the same
       or an older major version.  Backslash commands are particularly likely
       to fail if the server is of a newer version than <application>psql</application>
       itself.  However, backslash commands of the <literal>\d</literal> family should
       work with servers of versions back to 10, though not necessarily with
       servers newer than <application>psql</application> itself.  The general
       functionality of running SQL commands and displaying query results
       should also work with servers of a newer major version, but this cannot
       be guaranteed in all cases.
      </para>
      <para>
       If you want to use <application>psql</application> to connect to several
       servers of different major versions, it is recommended that you use the
       newest version of <application>psql</application>.  Alternatively, you
       can keep around a copy of <application>psql</application> from each
       major version and be sure to use the version that matches the
       respective server.  But in practice, this additional complication should
       not be necessary.
      </para>
      </listitem>

      <listitem>
      <para>
       Before <productname>PostgreSQL</productname> 9.6,
       the <option>-c</option> option implied <option>-X</option>
       (<option>--no-psqlrc</option>); this is no longer the case.
      </para>
      </listitem>

      <listitem>
      <para>
       Before <productname>PostgreSQL</productname> 8.4,
       <application>psql</application> allowed the
       first argument of a single-letter backslash command to start
       directly after the command, without intervening whitespace.
       Now, some whitespace is required.
      </para>
      </listitem>
    </itemizedlist>
 </refsect1>


 <refsect1>
  <title>Notes for Windows Users</title>

 <para>
  <application>psql</application> is built as a <quote>console
  application</quote>.  Since the Windows console windows use a different
  encoding than the rest of the system, you must take special care
  when using 8-bit characters within <application>psql</application>.
  If <application>psql</application> detects a problematic
  console code page, it will warn you at startup. To change the
  console code page, two things are necessary:

   <itemizedlist>
    <listitem>
     <para>
      Set the code page by entering <userinput>cmd.exe /c chcp
      1252</userinput>. (1252 is a code page that is appropriate for
      German; replace it with your value.) If you are using Cygwin,
      you can put this command in <filename>/etc/profile</filename>.
     </para>
    </listitem>

    <listitem>
     <para>
      Set the console font to <literal>Lucida Console</literal>, because the
      raster font does not work with the ANSI code page.
     </para>
    </listitem>
   </itemizedlist></para>

 </refsect1>


 <refsect1 id="app-psql-examples" xreflabel="Examples">
  <title>Examples</title>

  <para>
  The first example shows how to spread a command over several lines of
  input. Notice the changing prompt:
<programlisting>
testdb=&gt; <userinput>CREATE TABLE my_table (</userinput>
testdb(&gt; <userinput> first integer NOT NULL DEFAULT 0,</userinput>
testdb(&gt; <userinput> second text)</userinput>
testdb-&gt; <userinput>;</userinput>
CREATE TABLE
</programlisting>
  Now look at the table definition again:
<programlisting>
testdb=&gt; <userinput>\d my_table</userinput>
              Table "public.my_table"
 Column |  Type   | Collation | Nullable | Default
--------+---------+-----------+----------+---------
 first  | integer |           | not null | 0
 second | text    |           |          |
</programlisting>
  Now we change the prompt to something more interesting:
<programlisting>
testdb=&gt; <userinput>\set PROMPT1 '%n@%m %~%R%# '</userinput>
peter@localhost testdb=&gt;
</programlisting>
  Let's assume you have filled the table with data and want to take a
  look at it:
<programlisting>
peter@localhost testdb=&gt; SELECT * FROM my_table;
 first | second
-------+--------
     1 | one
     2 | two
     3 | three
     4 | four
(4 rows)
</programlisting>
  You can display tables in different ways by using the
  <command>\pset</command> command:
<programlisting>
peter@localhost testdb=&gt; <userinput>\pset border 2</userinput>
Border style is 2.
peter@localhost testdb=&gt; <userinput>SELECT * FROM my_table;</userinput>
+-------+--------+
| first | second |
+-------+--------+
|     1 | one    |
|     2 | two    |
|     3 | three  |
|     4 | four   |
+-------+--------+
(4 rows)

peter@localhost testdb=&gt; <userinput>\pset border 0</userinput>
Border style is 0.
peter@localhost testdb=&gt; <userinput>SELECT * FROM my_table;</userinput>
first second
----- ------
    1 one
    2 two
    3 three
    4 four
(4 rows)

peter@localhost testdb=&gt; <userinput>\pset border 1</userinput>
Border style is 1.
peter@localhost testdb=&gt; <userinput>\pset format csv</userinput>
Output format is csv.
peter@localhost testdb=&gt; <userinput>\pset tuples_only</userinput>
Tuples only is on.
peter@localhost testdb=&gt; <userinput>SELECT second, first FROM my_table;</userinput>
one,1
two,2
three,3
four,4
peter@localhost testdb=&gt; <userinput>\pset format unaligned</userinput>
Output format is unaligned.
peter@localhost testdb=&gt; <userinput>\pset fieldsep '\t'</userinput>
Field separator is "    ".
peter@localhost testdb=&gt; <userinput>SELECT second, first FROM my_table;</userinput>
one     1
two     2
three   3
four    4
</programlisting>
  Alternatively, use the short commands:
<programlisting>
peter@localhost testdb=&gt; <userinput>\a \t \x</userinput>
Output format is aligned.
Tuples only is off.
Expanded display is on.
peter@localhost testdb=&gt; <userinput>SELECT * FROM my_table;</userinput>
-[ RECORD 1 ]-
first  | 1
second | one
-[ RECORD 2 ]-
first  | 2
second | two
-[ RECORD 3 ]-
first  | 3
second | three
-[ RECORD 4 ]-
first  | 4
second | four
</programlisting>
  </para>

  <para>
  Also, these output format options can be set for just one query by using
  <literal>\g</literal>:
<programlisting>
peter@localhost testdb=&gt; <userinput>SELECT * FROM my_table</userinput>
peter@localhost testdb-&gt; <userinput>\g (format=aligned tuples_only=off expanded=on)</userinput>
-[ RECORD 1 ]-
first  | 1
second | one
-[ RECORD 2 ]-
first  | 2
second | two
-[ RECORD 3 ]-
first  | 3
second | three
-[ RECORD 4 ]-
first  | 4
second | four
</programlisting>
  </para>

  <para>
   Here is an example of using the <command>\df</command> command to
   find only functions with names matching <literal>int*pl</literal>
   and whose second argument is of type <type>bigint</type>:
<programlisting>
testdb=&gt; <userinput>\df int*pl * bigint</userinput>
                          List of functions
   Schema   |  Name   | Result data type | Argument data types | Type
------------+---------+------------------+---------------------+------
 pg_catalog | int28pl | bigint           | smallint, bigint    | func
 pg_catalog | int48pl | bigint           | integer, bigint     | func
 pg_catalog | int8pl  | bigint           | bigint, bigint      | func
(3 rows)
</programlisting>
  </para>

  <para>
   Here, the <literal>+</literal> option is used to display additional
   information about one of these functions, and <literal>x</literal> is used
   to display the results in expanded mode:
<programlisting>
testdb=&gt; <userinput>\df+x int*pl integer bigint</userinput>
List of functions
-[ RECORD 1 ]-------+-----------------------------
Schema              | pg_catalog
Name                | int48pl
Result data type    | bigint
Argument data types | integer, bigint
Type                | func
Volatility          | immutable
Parallel            | safe
Owner               | postgres
Security            | invoker
Leakproof?          | no
Access privileges   |
Language            | internal
Internal name       | int48pl
Description         | implementation of + operator
</programlisting>
  </para>

  <para>
  When suitable, query results can be shown in a crosstab representation
  with the <command>\crosstabview</command> command:
<programlisting>
testdb=&gt; <userinput>SELECT first, second, first &gt; 2 AS gt2 FROM my_table;</userinput>
 first | second | gt2
-------+--------+-----
     1 | one    | f
     2 | two    | f
     3 | three  | t
     4 | four   | t
(4 rows)

testdb=&gt; <userinput>\crosstabview first second</userinput>
 first | one | two | three | four
-------+-----+-----+-------+------
     1 | f   |     |       |
     2 |     | f   |       |
     3 |     |     | t     |
     4 |     |     |       | t
(4 rows)
</programlisting>

This second example shows a multiplication table with rows sorted in reverse
numerical order and columns with an independent, ascending numerical order.
<programlisting>
testdb=&gt; <userinput>SELECT t1.first AS "A", t2.first+100 AS "B", t1.first*(t2.first+100) AS "AxB",</userinput>
testdb-&gt; <userinput>row_number() OVER (ORDER BY t2.first) AS ord</userinput>
testdb-&gt; <userinput>FROM my_table t1 CROSS JOIN my_table t2 ORDER BY 1 DESC</userinput>
testdb-&gt; <userinput>\crosstabview "A" "B" "AxB" ord</userinput>
 A | 101 | 102 | 103 | 104
---+-----+-----+-----+-----
 4 | 404 | 408 | 412 | 416
 3 | 303 | 306 | 309 | 312
 2 | 202 | 204 | 206 | 208
 1 | 101 | 102 | 103 | 104
(4 rows)
</programlisting></para>

 </refsect1>

</refentry>