doc/src/sgml/pgstatstatements.sgml - master - githubmirror/postgres

doc/src/sgml/pgstatstatements.sgml
1 145 строк43 KB
Michael Paquier
pg_stat_statements: Add counters for generic and custom plans
31 июл 2025, 05:37
31 июл 2025, 05:373357471
<!-- doc/src/sgml/pgstatstatements.sgml -->

<sect1 id="pgstatstatements" xreflabel="pg_stat_statements">
 <title>pg_stat_statements &mdash; track statistics of SQL planning and execution</title>

 <indexterm zone="pgstatstatements">
  <primary>pg_stat_statements</primary>
 </indexterm>

 <para>
  The <filename>pg_stat_statements</filename> module provides a means for
  tracking planning and execution statistics of all SQL statements executed by
  a server.
 </para>

 <para>
  The module must be loaded by adding <literal>pg_stat_statements</literal> to
  <xref linkend="guc-shared-preload-libraries"/> in
  <filename>postgresql.conf</filename>, because it requires additional shared memory.
  This means that a server restart is needed to add or remove the module.
  In addition, query identifier calculation must be enabled in order for the
  module to be active, which is done automatically if <xref linkend="guc-compute-query-id"/>
  is set to <literal>auto</literal> or <literal>on</literal>, or any third-party
  module that calculates query identifiers is loaded.
 </para>

 <para>
   When <filename>pg_stat_statements</filename> is active, it tracks
   statistics across all databases of the server.  To access and manipulate
   these statistics, the module provides views
   <structname>pg_stat_statements</structname> and
   <structname>pg_stat_statements_info</structname>,
   and the utility functions <function>pg_stat_statements_reset</function> and
   <function>pg_stat_statements</function>.  These are not available globally but
   can be enabled for a specific database with
   <command>CREATE EXTENSION pg_stat_statements</command>.
 </para>

 <sect2 id="pgstatstatements-pg-stat-statements">
  <title>The <structname>pg_stat_statements</structname> View</title>

  <para>
   The statistics gathered by the module are made available via a
   view named <structname>pg_stat_statements</structname>.  This view
   contains one row for each distinct combination of database ID, user
   ID, query ID and whether it's a top-level statement or not (up to
   the maximum number of distinct statements that the module can track).
   The columns of the view are shown in
   <xref linkend="pgstatstatements-columns"/>.
  </para>

  <table id="pgstatstatements-columns">
   <title><structname>pg_stat_statements</structname> Columns</title>
   <tgroup cols="1">
    <thead>
     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       Column Type
      </para>
      <para>
       Description
      </para></entry>
     </row>
    </thead>

    <tbody>
     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>userid</structfield> <type>oid</type>
       (references <link linkend="catalog-pg-authid"><structname>pg_authid</structname></link>.<structfield>oid</structfield>)
      </para>
      <para>
       OID of user who executed the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>dbid</structfield> <type>oid</type>
       (references <link linkend="catalog-pg-database"><structname>pg_database</structname></link>.<structfield>oid</structfield>)
      </para>
      <para>
       OID of database in which the statement was executed
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>toplevel</structfield> <type>bool</type>
      </para>
      <para>
       True if the query was executed as a top-level statement
       (always true if <varname>pg_stat_statements.track</varname> is set to
       <literal>top</literal>)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>queryid</structfield> <type>bigint</type>
      </para>
      <para>
       Hash code to identify identical normalized queries.
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>query</structfield> <type>text</type>
      </para>
      <para>
       Text of a representative statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>plans</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the statement was planned
       (if <varname>pg_stat_statements.track_planning</varname> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>total_plan_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent planning the statement, in milliseconds
       (if <varname>pg_stat_statements.track_planning</varname> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>min_plan_time</structfield> <type>double precision</type>
      </para>
      <para>
       Minimum time spent planning the statement, in milliseconds.
       This field will be zero if <varname>pg_stat_statements.track_planning</varname>
       is disabled, or if the counter has been reset using the
       <function>pg_stat_statements_reset</function> function with the
       <structfield>minmax_only</structfield> parameter set to <literal>true</literal>
       and never been planned since.
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>max_plan_time</structfield> <type>double precision</type>
      </para>
      <para>
       Maximum time spent planning the statement, in milliseconds.
       This field will be zero if <varname>pg_stat_statements.track_planning</varname>
       is disabled, or if the counter has been reset using the
       <function>pg_stat_statements_reset</function> function with the
       <structfield>minmax_only</structfield> parameter set to <literal>true</literal>
       and never been planned since.
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>mean_plan_time</structfield> <type>double precision</type>
      </para>
      <para>
       Mean time spent planning the statement, in milliseconds
       (if <varname>pg_stat_statements.track_planning</varname> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>stddev_plan_time</structfield> <type>double precision</type>
      </para>
      <para>
       Population standard deviation of time spent planning the statement,
       in milliseconds
       (if <varname>pg_stat_statements.track_planning</varname> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>calls</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the statement was executed
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>total_exec_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent executing the statement, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>min_exec_time</structfield> <type>double precision</type>
      </para>
      <para>
       Minimum time spent executing the statement, in milliseconds,
       this field will be zero until this statement
       is executed first time after reset performed by the
       <function>pg_stat_statements_reset</function> function with the
       <structfield>minmax_only</structfield> parameter set to <literal>true</literal>
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>max_exec_time</structfield> <type>double precision</type>
      </para>
      <para>
       Maximum time spent executing the statement, in milliseconds,
       this field will be zero until this statement
       is executed first time after reset performed by the
       <function>pg_stat_statements_reset</function> function with the
       <structfield>minmax_only</structfield> parameter set to <literal>true</literal>
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>mean_exec_time</structfield> <type>double precision</type>
      </para>
      <para>
       Mean time spent executing the statement, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>stddev_exec_time</structfield> <type>double precision</type>
      </para>
      <para>
       Population standard deviation of time spent executing the statement, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>rows</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of rows retrieved or affected by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blks_hit</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of shared block cache hits by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blks_read</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of shared blocks read by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blks_dirtied</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of shared blocks dirtied by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blks_written</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of shared blocks written by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blks_hit</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of local block cache hits by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blks_read</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of local blocks read by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blks_dirtied</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of local blocks dirtied by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blks_written</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of local blocks written by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>temp_blks_read</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of temp blocks read by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>temp_blks_written</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of temp blocks written by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blk_read_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent reading shared blocks, in milliseconds
       (if <xref linkend="guc-track-io-timing"/> is enabled, otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>shared_blk_write_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent writing shared blocks, in milliseconds
       (if <xref linkend="guc-track-io-timing"/> is enabled, otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blk_read_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent reading local blocks, in milliseconds
       (if <xref linkend="guc-track-io-timing"/> is enabled, otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>local_blk_write_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent writing local blocks, in milliseconds
       (if <xref linkend="guc-track-io-timing"/> is enabled, otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>temp_blk_read_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent reading temporary file blocks, in
       milliseconds (if <xref linkend="guc-track-io-timing"/> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>temp_blk_write_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time the statement spent writing temporary file blocks, in
       milliseconds (if <xref linkend="guc-track-io-timing"/> is enabled,
       otherwise zero)
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>wal_records</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of WAL records generated by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>wal_fpi</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of WAL full page images generated by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>wal_bytes</structfield> <type>numeric</type>
      </para>
      <para>
       Total amount of WAL generated by the statement in bytes
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>wal_buffers_full</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the WAL buffers became full
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_functions</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of functions JIT-compiled by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_generation_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent by the statement on generating JIT code, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_inlining_count</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times functions have been inlined
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_inlining_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent by the statement on inlining functions, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_optimization_count</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the statement has been optimized
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_optimization_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent by the statement on optimizing, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_emission_count</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times code has been emitted
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_emission_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent by the statement on emitting code, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_deform_count</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of tuple deform functions JIT-compiled by the statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>jit_deform_time</structfield> <type>double precision</type>
      </para>
      <para>
       Total time spent by the statement on JIT-compiling tuple deform
       functions, in milliseconds
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>parallel_workers_to_launch</structfield> <type>bigint</type>
      </para>
      <para>
       Number of parallel workers planned to be launched
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>parallel_workers_launched</structfield> <type>bigint</type>
      </para>
      <para>
       Number of parallel workers actually launched
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>generic_plan_calls</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the statement has been executed using a generic plan
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>custom_plan_calls</structfield> <type>bigint</type>
      </para>
      <para>
       Number of times the statement has been executed using a custom plan
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>stats_since</structfield> <type>timestamp with time zone</type>
      </para>
      <para>
       Time at which statistics gathering started for this statement
      </para></entry>
     </row>

     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>minmax_stats_since</structfield> <type>timestamp with time zone</type>
      </para>
      <para>
       Time at which min/max statistics gathering started for this
       statement (fields <structfield>min_plan_time</structfield>,
       <structfield>max_plan_time</structfield>,
       <structfield>min_exec_time</structfield> and
       <structfield>max_exec_time</structfield>)
      </para></entry>
     </row>
    </tbody>
   </tgroup>
  </table>

  <para>
   For security reasons, only superusers and roles with privileges of the
   <literal>pg_read_all_stats</literal> role are allowed to see the SQL text and
   <structfield>queryid</structfield> of queries executed by other users.
   Other users can see the statistics, however, if the view has been installed
   in their database.
  </para>

  <para>
   Plannable queries (that is, <command>SELECT</command>, <command>INSERT</command>,
   <command>UPDATE</command>, <command>DELETE</command>, and <command>MERGE</command>)
   and utility commands are combined into a single
   <structname>pg_stat_statements</structname> entry whenever they have identical query
   structures according to an internal hash calculation.  Typically, two
   queries will be considered the same for this purpose if they are
   semantically equivalent except for the values of literal constants
   appearing in the query.
  </para>

  <note>
   <para>
    The following details about constant replacement and
    <structfield>queryid</structfield> only apply when <xref
    linkend="guc-compute-query-id"/> is enabled.  If you use an external
    module instead to compute <structfield>queryid</structfield>, you
    should refer to its documentation for details.
   </para>
  </note>

  <para>
   When a constant's value has been ignored for purposes of matching the query
   to other queries, the constant is replaced by a parameter symbol, such
   as <literal>$1</literal>, in the <structname>pg_stat_statements</structname>
   display.
   The rest of the query text is that of the first query that had the
   particular <structfield>queryid</structfield> hash value associated with the
   <structname>pg_stat_statements</structname> entry.
  </para>

  <para>
   Queries on which normalization can be applied may be observed with constant
   values in <structname>pg_stat_statements</structname>, especially when there
   is a high rate of entry deallocations. To reduce the likelihood of this
   happening, consider increasing <varname>pg_stat_statements.max</varname>.
   The <structname>pg_stat_statements_info</structname> view, discussed below
   in <xref linkend="pgstatstatements-pg-stat-statements-info"/>,
   provides statistics about entry deallocations.
  </para>

  <para>
   In some cases, queries with visibly different texts might get merged into a
   single <structname>pg_stat_statements</structname> entry; as explained above,
   this is expected to happen for semantically equivalent queries.
   In addition, if the only difference between queries is the number of elements
   in a list of constants, the list will get squashed down to a single element but shown
   with a commented-out list indicator:

<screen>
=# SELECT pg_stat_statements_reset();
=# SELECT * FROM test WHERE a IN (1, 2, 3, 4, 5, 6, 7);
=# SELECT * FROM test WHERE a IN (1, 2, 3, 4, 5, 6, 7, 8);
=# SELECT query, calls FROM pg_stat_statements
   WHERE query LIKE 'SELECT%';
-[ RECORD 1 ]------------------------------
query | SELECT * FROM test WHERE a IN ($1 /*, ... */)
calls | 2
</screen>

   In addition to these cases, there is a small chance of hash collisions
   causing unrelated queries to be merged into one entry.
   (This cannot happen for queries belonging to different users or databases,
   however.)
  </para>

  <para>
   Since the <structfield>queryid</structfield> hash value is computed on the
   post-parse-analysis representation of the queries, the opposite is
   also possible: queries with identical texts might appear as
   separate entries, if they have different meanings as a result of
   factors such as different <varname>search_path</varname> settings.
  </para>

  <para>
   Consumers of <structname>pg_stat_statements</structname> may wish to use
   <structfield>queryid</structfield> (perhaps in combination with
   <structfield>dbid</structfield> and <structfield>userid</structfield>) as a more stable
   and reliable identifier for each entry than its query text.
   However, it is important to understand that there are only limited
   guarantees around the stability of the <structfield>queryid</structfield> hash
   value.  Since the identifier is derived from the
   post-parse-analysis tree, its value is a function of, among other
   things, the internal object identifiers appearing in this representation.
   This has some counterintuitive implications.  For example,
   <filename>pg_stat_statements</filename> will consider two apparently-identical
   queries to be distinct, if they reference for example a function that was
   dropped and recreated between the executions of the two queries.
   Conversely, if a table is dropped and recreated between the
   executions of queries, two apparently-identical queries may be
   considered the same. However, if the alias for a table is different
   for otherwise-similar queries, these queries will be considered
   distinct.
   The hashing process is also sensitive to differences in
   machine architecture and other facets of the platform.
   Furthermore, it is not safe to assume that <structfield>queryid</structfield>
   will be stable across major versions of <productname>PostgreSQL</productname>.
  </para>

  <para>
   Two servers participating in replication based on physical WAL replay can
   be expected to have identical <structfield>queryid</structfield> values for
   the same query.  However, logical replication schemes do not promise to
   keep replicas identical in all relevant details, so
   <structfield>queryid</structfield> will not be a useful identifier for
   accumulating costs across a set of logical replicas.
   If in doubt, direct testing is recommended.
  </para>

  <para>
   Generally, it can be assumed that <structfield>queryid</structfield> values
   are stable between minor version releases of <productname>PostgreSQL</productname>,
   providing that instances are running on the same machine architecture and
   the catalog metadata details match.  Compatibility will only be broken
   between minor versions as a last resort.
  </para>

  <para>
   The parameter symbols used to replace constants in
   representative query texts start from the next number after the
   highest <literal>$</literal><replaceable>n</replaceable> parameter in the original query
   text, or <literal>$1</literal> if there was none.  It's worth noting that in
   some cases there may be hidden parameter symbols that affect this
   numbering.  For example, <application>PL/pgSQL</application> uses hidden parameter
   symbols to insert values of function local variables into queries, so that
   a <application>PL/pgSQL</application> statement like <literal>SELECT i + 1 INTO j</literal>
   would have representative text like <literal>SELECT i + $2</literal>.
  </para>

  <para>
   The representative query texts are kept in an external disk file, and do
   not consume shared memory.  Therefore, even very lengthy query texts can
   be stored successfully.  However, if many long query texts are
   accumulated, the external file might grow unmanageably large.  As a
   recovery method if that happens, <filename>pg_stat_statements</filename> may
   choose to discard the query texts, whereupon all existing entries in
   the <structname>pg_stat_statements</structname> view will show
   null <structfield>query</structfield> fields, though the statistics associated with
   each <structfield>queryid</structfield> are preserved.  If this happens, consider
   reducing <varname>pg_stat_statements.max</varname> to prevent
   recurrences.
  </para>

  <para>
   <structfield>plans</structfield> and <structfield>calls</structfield> aren't
   always expected to match because planning and execution statistics are
   updated at their respective end phase, and only for successful operations.
   For example, if a statement is successfully planned but fails during
   the execution phase, only its planning statistics will be updated.
   If planning is skipped because a cached plan is used, only its execution
   statistics will be updated.
  </para>
 </sect2>

 <sect2 id="pgstatstatements-pg-stat-statements-info">
  <title>The <structname>pg_stat_statements_info</structname> View</title>

  <indexterm>
   <primary>pg_stat_statements_info</primary>
  </indexterm>

  <para>
   The statistics of the <filename>pg_stat_statements</filename> module
   itself are tracked and made available via a view named
   <structname>pg_stat_statements_info</structname>.  This view contains
   only a single row.  The columns of the view are shown in
   <xref linkend="pgstatstatementsinfo-columns"/>.
  </para>

  <table id="pgstatstatementsinfo-columns">
   <title><structname>pg_stat_statements_info</structname> Columns</title>
   <tgroup cols="1">
    <thead>
     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       Column Type
      </para>
      <para>
       Description
      </para></entry>
     </row>
    </thead>

    <tbody>
     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>dealloc</structfield> <type>bigint</type>
      </para>
      <para>
       Total number of times <structname>pg_stat_statements</structname>
       entries about the least-executed statements were deallocated
       because more distinct statements than
       <varname>pg_stat_statements.max</varname> were observed
      </para></entry>
     </row>
     <row>
      <entry role="catalog_table_entry"><para role="column_definition">
       <structfield>stats_reset</structfield> <type>timestamp with time zone</type>
      </para>
      <para>
       Time at which all statistics in the
       <structname>pg_stat_statements</structname> view were last reset.
      </para></entry>
     </row>

    </tbody>
   </tgroup>
  </table>
 </sect2>

 <sect2 id="pgstatstatements-funcs">
  <title>Functions</title>

  <variablelist>
   <varlistentry>
    <term>
     <function>pg_stat_statements_reset(userid Oid, dbid Oid, queryid
     bigint, minmax_only boolean) returns timestamp with time zone</function>
     <indexterm>
      <primary>pg_stat_statements_reset</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <function>pg_stat_statements_reset</function> discards statistics
      gathered so far by <filename>pg_stat_statements</filename> corresponding
      to the specified <structfield>userid</structfield>, <structfield>dbid</structfield>
      and <structfield>queryid</structfield>.  If any of the parameters are not
      specified, the default value <literal>0</literal>(invalid) is used for
      each of them and the statistics that match with other parameters will be
      reset.  If no parameter is specified or all the specified parameters are
      <literal>0</literal>(invalid), it will discard all statistics.
      If all statistics in the <filename>pg_stat_statements</filename>
      view are discarded, it will also reset the statistics in the
      <structname>pg_stat_statements_info</structname> view.
      When <structfield>minmax_only</structfield> is <literal>true</literal> only the
      values of minimum and maximum planning and execution time will be reset (i.e.
      <structfield>min_plan_time</structfield>, <structfield>max_plan_time</structfield>,
      <structfield>min_exec_time</structfield> and <structfield>max_exec_time</structfield>
      fields). The default value for <structfield>minmax_only</structfield> parameter is
      <literal>false</literal>. Time of last min/max reset performed is shown in
      <structfield>minmax_stats_since</structfield> field of the
      <structname>pg_stat_statements</structname> view.
      This function returns the time of a reset. This time is saved to
      <structfield>stats_reset</structfield> field of
      <structname>pg_stat_statements_info</structname> view or to
      <structfield>minmax_stats_since</structfield> field of the
      <structname>pg_stat_statements</structname> view if the corresponding reset was
      actually performed.
      By default, this function can only be executed by superusers.
      Access may be granted to others using <command>GRANT</command>.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <function>pg_stat_statements(showtext boolean) returns setof record</function>
     <indexterm>
      <primary>pg_stat_statements</primary>
      <secondary>function</secondary>
     </indexterm>
    </term>

    <listitem>
     <para>
      The <structname>pg_stat_statements</structname> view is defined in
      terms of a function also named <function>pg_stat_statements</function>.
      It is possible for clients to call
      the <function>pg_stat_statements</function> function directly, and by
      specifying <literal>showtext := false</literal> have query text be
      omitted (that is, the <literal>OUT</literal> argument that corresponds
      to the view's <structfield>query</structfield> column will return nulls).  This
      feature is intended to support external tools that might wish to avoid
      the overhead of repeatedly retrieving query texts of indeterminate
      length.  Such tools can instead cache the first query text observed
      for each entry themselves, since that is
      all <filename>pg_stat_statements</filename> itself does, and then retrieve
      query texts only as needed.  Since the server stores query texts in a
      file, this approach may reduce physical I/O for repeated examination
      of the <structname>pg_stat_statements</structname> data.
     </para>
    </listitem>
   </varlistentry>
  </variablelist>
 </sect2>

 <sect2 id="pgstatstatements-config-params">
  <title>Configuration Parameters</title>

  <variablelist>
   <varlistentry>
    <term>
     <varname>pg_stat_statements.max</varname> (<type>integer</type>)
     <indexterm>
      <primary><varname>pg_stat_statements.max</varname> configuration parameter</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <varname>pg_stat_statements.max</varname> is the maximum number of
      statements tracked by the module (i.e., the maximum number of rows
      in the <structname>pg_stat_statements</structname> view).  If more distinct
      statements than that are observed, information about the least-executed
      statements is discarded.  The number of times such information was
      discarded can be seen in the
      <structname>pg_stat_statements_info</structname> view.
      The default value is 5000.
      This parameter can only be set at server start.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <varname>pg_stat_statements.track</varname> (<type>enum</type>)
     <indexterm>
      <primary><varname>pg_stat_statements.track</varname> configuration parameter</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <varname>pg_stat_statements.track</varname> controls which statements
      are counted by the module.
      Specify <literal>top</literal> to track top-level statements (those issued
      directly by clients), <literal>all</literal> to also track nested statements
      (such as statements invoked within functions), or <literal>none</literal> to
      disable statement statistics collection.
      The default value is <literal>top</literal>.
      Only superusers can change this setting.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <varname>pg_stat_statements.track_utility</varname> (<type>boolean</type>)
     <indexterm>
      <primary><varname>pg_stat_statements.track_utility</varname> configuration parameter</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <varname>pg_stat_statements.track_utility</varname> controls whether
      utility commands are tracked by the module.  Utility commands are
      all those other than <command>SELECT</command>, <command>INSERT</command>,
      <command>UPDATE</command>, <command>DELETE</command>, and <command>MERGE</command>.
      The default value is <literal>on</literal>.
      Only superusers can change this setting.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <varname>pg_stat_statements.track_planning</varname> (<type>boolean</type>)
     <indexterm>
      <primary><varname>pg_stat_statements.track_planning</varname> configuration parameter</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <varname>pg_stat_statements.track_planning</varname> controls whether
      planning operations and duration are tracked by the module.
      Enabling this parameter may incur a noticeable performance penalty,
      especially when statements with identical query structure are executed
      by many concurrent connections which compete to update a small number of
      <structname>pg_stat_statements</structname> entries.
      The default value is <literal>off</literal>.
      Only superusers can change this setting.
     </para>
    </listitem>
   </varlistentry>

   <varlistentry>
    <term>
     <varname>pg_stat_statements.save</varname> (<type>boolean</type>)
     <indexterm>
      <primary><varname>pg_stat_statements.save</varname> configuration parameter</primary>
     </indexterm>
    </term>

    <listitem>
     <para>
      <varname>pg_stat_statements.save</varname> specifies whether to
      save statement statistics across server shutdowns.
      If it is <literal>off</literal> then statistics are not saved at
      shutdown nor reloaded at server start.
      The default value is <literal>on</literal>.
      This parameter can only be set in the <filename>postgresql.conf</filename>
      file or on the server command line.
     </para>
    </listitem>
   </varlistentry>
  </variablelist>

  <para>
   The module requires additional shared memory proportional to
   <varname>pg_stat_statements.max</varname>.  Note that this
   memory is consumed whenever the module is loaded, even if
   <varname>pg_stat_statements.track</varname> is set to <literal>none</literal>.
  </para>

  <para>
   These parameters must be set in <filename>postgresql.conf</filename>.
   Typical usage might be:

<programlisting>
# postgresql.conf
shared_preload_libraries = 'pg_stat_statements'

compute_query_id = on
pg_stat_statements.max = 10000
pg_stat_statements.track = all
</programlisting>
  </para>
 </sect2>

 <sect2 id="pgstatstatements-sample-output">
  <title>Sample Output</title>

<screen>
bench=# SELECT pg_stat_statements_reset();

$ pgbench -i bench
$ pgbench -c10 -t300 bench

bench=# \x
bench=# SELECT query, calls, total_exec_time, rows, 100.0 * shared_blks_hit /
               nullif(shared_blks_hit + shared_blks_read, 0) AS hit_percent
          FROM pg_stat_statements ORDER BY total_exec_time DESC LIMIT 5;
-[ RECORD 1 ]---+--------------------------------------------------&zwsp;------------------
query           | UPDATE pgbench_branches SET bbalance = bbalance + $1 WHERE bid = $2
calls           | 3000
total_exec_time | 25565.855387
rows            | 3000
hit_percent     | 100.0000000000000000
-[ RECORD 2 ]---+--------------------------------------------------&zwsp;------------------
query           | UPDATE pgbench_tellers SET tbalance = tbalance + $1 WHERE tid = $2
calls           | 3000
total_exec_time | 20756.669379
rows            | 3000
hit_percent     | 100.0000000000000000
-[ RECORD 3 ]---+--------------------------------------------------&zwsp;------------------
query           | copy pgbench_accounts from stdin
calls           | 1
total_exec_time | 291.865911
rows            | 100000
hit_percent     | 100.0000000000000000
-[ RECORD 4 ]---+--------------------------------------------------&zwsp;------------------
query           | UPDATE pgbench_accounts SET abalance = abalance + $1 WHERE aid = $2
calls           | 3000
total_exec_time | 271.232977
rows            | 3000
hit_percent     | 98.8454011741682975
-[ RECORD 5 ]---+--------------------------------------------------&zwsp;------------------
query           | alter table pgbench_accounts add primary key (aid)
calls           | 1
total_exec_time | 160.588563
rows            | 0
hit_percent     | 100.0000000000000000


bench=# SELECT pg_stat_statements_reset(0,0,s.queryid) FROM pg_stat_statements AS s
            WHERE s.query = 'UPDATE pgbench_branches SET bbalance = bbalance + $1 WHERE bid = $2';

bench=# SELECT query, calls, total_exec_time, rows, 100.0 * shared_blks_hit /
               nullif(shared_blks_hit + shared_blks_read, 0) AS hit_percent
          FROM pg_stat_statements ORDER BY total_exec_time DESC LIMIT 5;
-[ RECORD 1 ]---+--------------------------------------------------&zwsp;------------------
query           | UPDATE pgbench_tellers SET tbalance = tbalance + $1 WHERE tid = $2
calls           | 3000
total_exec_time | 20756.669379
rows            | 3000
hit_percent     | 100.0000000000000000
-[ RECORD 2 ]---+--------------------------------------------------&zwsp;------------------
query           | copy pgbench_accounts from stdin
calls           | 1
total_exec_time | 291.865911
rows            | 100000
hit_percent     | 100.0000000000000000
-[ RECORD 3 ]---+--------------------------------------------------&zwsp;------------------
query           | UPDATE pgbench_accounts SET abalance = abalance + $1 WHERE aid = $2
calls           | 3000
total_exec_time | 271.232977
rows            | 3000
hit_percent     | 98.8454011741682975
-[ RECORD 4 ]---+--------------------------------------------------&zwsp;------------------
query           | alter table pgbench_accounts add primary key (aid)
calls           | 1
total_exec_time | 160.588563
rows            | 0
hit_percent     | 100.0000000000000000
-[ RECORD 5 ]---+--------------------------------------------------&zwsp;------------------
query           | vacuum analyze pgbench_accounts
calls           | 1
total_exec_time | 136.448116
rows            | 0
hit_percent     | 99.9201915403032721

bench=# SELECT pg_stat_statements_reset(0,0,0);

bench=# SELECT query, calls, total_exec_time, rows, 100.0 * shared_blks_hit /
               nullif(shared_blks_hit + shared_blks_read, 0) AS hit_percent
          FROM pg_stat_statements ORDER BY total_exec_time DESC LIMIT 5;
-[ RECORD 1 ]---+--------------------------------------------------&zwsp;---------------------------
query           | SELECT pg_stat_statements_reset(0,0,0)
calls           | 1
total_exec_time | 0.189497
rows            | 1
hit_percent     |
-[ RECORD 2 ]---+--------------------------------------------------&zwsp;---------------------------
query           | SELECT query, calls, total_exec_time, rows, $1 * shared_blks_hit /          +
                |                nullif(shared_blks_hit + shared_blks_read, $2) AS hit_percent+
                |           FROM pg_stat_statements ORDER BY total_exec_time DESC LIMIT $3
calls           | 0
total_exec_time | 0
rows            | 0
hit_percent     |

</screen>
 </sect2>

 <sect2 id="pgstatstatements-authors">
  <title>Authors</title>

  <para>
   Takahiro Itagaki <email>itagaki.takahiro@oss.ntt.co.jp</email>.
   Query normalization added by Peter Geoghegan <email>peter@2ndquadrant.com</email>.
  </para>
 </sect2>

</sect1>