setup/docker/armv7/compose.yaml - develop - githubmirror/photoprism

setup/docker/armv7/compose.yaml
154 строки11 KB
Michael Mayer
Config: Raise example JPEG size to 15360 and refresh size docs #5669
21 июл 2026, 15:05
21 июл 2026, 15:056338435
# Example Docker Compose config file for PhotoPrism (ARMv7-based, 32-bit devices)
#
# Note:
# - Use https://dl.photoprism.app/docker/arm64/compose.yaml for running PhotoPrism on ARM64-based (64-bit) devices.
# - Running PhotoPrism on a server with less than 4 GB of swap space or setting a memory/swap limit can cause unexpected
#   restarts ("crashes"), for example, when the indexer temporarily needs more memory to process large files.
# - In case you see Docker errors related to "cgroups", try adding the following parameters to /boot/firmware/cmdline.txt
#   or /boot/cmdline.txt (file location depends on the OS in use): cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1
# - If you install PhotoPrism on a public server outside your home network, please always run it behind a secure
#   HTTPS reverse proxy such as Traefik or Caddy. Your files and passwords will otherwise be transmitted
#   in clear text and can be intercepted by anyone, including your provider, hackers, and governments:
#   https://docs.photoprism.app/getting-started/proxies/traefik/
#
# Setup Guides:
# - https://docs.photoprism.app/getting-started/docker-compose/
# - https://docs.photoprism.app/getting-started/raspberry-pi/
# - https://www.photoprism.app/kb/activation/
#
# Troubleshooting Checklists:
# - https://docs.photoprism.app/getting-started/troubleshooting/
# - https://docs.photoprism.app/getting-started/troubleshooting/docker/
# - https://docs.photoprism.app/getting-started/troubleshooting/mariadb/
#
# CLI Commands:
# - https://docs.photoprism.app/getting-started/docker-compose/#command-line-interface
#
# All commands may have to be prefixed with "sudo" when not running as root.
# This will point the home directory shortcut ~ to /root in volume mounts.

services:
  photoprism:
    ## Use photoprism/photoprism:preview-armv7 for testing preview builds:
    image: photoprism/photoprism:armv7
    platform: "linux/arm"
    ## Don't enable automatic restarts until PhotoPrism has been properly configured and tested!
    ## If the service gets stuck in a restart loop, this points to a memory, filesystem, network, or database issue:
    ## https://docs.photoprism.app/getting-started/troubleshooting/#fatal-server-errors
    # restart: unless-stopped
    stop_grace_period: 15s
    depends_on:
      - mariadb
    security_opt:
      - seccomp:unconfined
      - apparmor:unconfined
    ## Server port mapping in the format "Host:Container". To use a different port, change the host port on
    ## the left-hand side and keep the container port, e.g. "80:2342" (for HTTP) or "443:2342 (for HTTPS):
    ports:
      - "2342:2342"
    ## Before you start the service, please check the following config options (and change them as needed):
    ## https://docs.photoprism.app/getting-started/config-options/
    environment:
      PHOTOPRISM_ADMIN_USER: "admin"                 # admin login username
      PHOTOPRISM_ADMIN_PASSWORD: "insecure"          # initial admin password (8-72 characters)
      PHOTOPRISM_AUTH_MODE: "password"               # authentication mode (public, password)
      PHOTOPRISM_DEFAULT_LOCALE: "en"                # default user interface language, e.g. "en" or "de"
      PHOTOPRISM_PLACES_LOCALE: "local"              # location details language, e.g. "local", "en", or "de"
      PHOTOPRISM_SITE_URL: "http://localhost:2342/"  # server URL in the format "http(s)://domain.name(:port)/(path)"
      PHOTOPRISM_DISABLE_TLS: "false"                # disables HTTPS/TLS even if the site URL starts with https:// and a certificate is available
      PHOTOPRISM_DEFAULT_TLS: "true"                 # defaults to a self-signed HTTPS/TLS certificate if no other certificate is available
      PHOTOPRISM_HTTP_COMPRESSION: "none"            # improves transfer speed and bandwidth utilization (none, gzip, zstd, or comma-separated list e.g. "zstd,gzip")
      PHOTOPRISM_WORKERS: 1                          # maximum number of indexing workers (limits system load)
      PHOTOPRISM_LOG_LEVEL: "info"                   # log level: trace, debug, info, warning, or error
      PHOTOPRISM_READONLY: "false"                   # do not modify originals directory (reduced functionality)
      PHOTOPRISM_EXPERIMENTAL: "false"               # enables experimental features
      PHOTOPRISM_DISABLE_CHOWN: "false"              # disables updating storage permissions via chmod and chown on startup
      PHOTOPRISM_DISABLE_WEBDAV: "false"             # disables built-in WebDAV server
      PHOTOPRISM_DISABLE_MCP: "false"                # disables Model Context Protocol (MCP) API endpoint for AI agent integrations
      PHOTOPRISM_DISABLE_SETTINGS: "false"           # disables Settings in Web UI
      PHOTOPRISM_DISABLE_TENSORFLOW: "false"         # disables all features depending on TensorFlow
      PHOTOPRISM_DISABLE_FACES: "true"               # disables face detection and recognition (requires TensorFlow)
      PHOTOPRISM_DISABLE_CLASSIFICATION: "false"     # disables image classification (requires TensorFlow)
      PHOTOPRISM_DISABLE_RAW: "true"                 # disables indexing and conversion of RAW images
      PHOTOPRISM_RAW_PRESETS: "false"                # enables applying user presets when converting RAW images (reduces performance)
      PHOTOPRISM_SIDECAR_YAML: "true"                # creates YAML sidecar files to back up picture metadata
      PHOTOPRISM_BACKUP_ALBUMS: "true"               # creates YAML files to back up album metadata
      PHOTOPRISM_BACKUP_DATABASE: "true"             # creates regular backups based on the configured schedule
      PHOTOPRISM_BACKUP_SCHEDULE: "daily"            # backup SCHEDULE in cron format (e.g. "0 12 * * *" for daily at noon) or at a random time (daily, weekly)
      PHOTOPRISM_INDEX_SCHEDULE: ""                  # indexing SCHEDULE in cron format (e.g. "@every 3h" for every 3 hours; "" to disable)
      PHOTOPRISM_AUTO_INDEX: 300                     # delay before automatically indexing files in SECONDS when uploading via WebDAV (-1 to disable)
      PHOTOPRISM_AUTO_IMPORT: -1                     # delay before automatically importing files in SECONDS when uploading via WebDAV (-1 to disable)
      PHOTOPRISM_DETECT_NSFW: "false"                # automatically flags photos as private that MAY be offensive (requires TensorFlow)
      PHOTOPRISM_UPLOAD_NSFW: "true"                 # allows uploads that MAY be offensive (no effect without TensorFlow)
      PHOTOPRISM_UPLOAD_ALLOW: ""                    # restricts uploads to these file types (comma-separated list of EXTENSIONS; leave blank to allow all)
      PHOTOPRISM_UPLOAD_ARCHIVES: "true"             # allows upload of zip archives (will be extracted before import)
      PHOTOPRISM_UPLOAD_LIMIT: 5000                  # maximum size of uploaded files and uncompressed archive contents in MB
      PHOTOPRISM_ORIGINALS_LIMIT: 5000               # maximum size of original media files in MB (larger files are skipped)
      # PHOTOPRISM_DATABASE_DRIVER: "sqlite"         # SQLite is an embedded database that does not require a separate database server
      PHOTOPRISM_DATABASE_DRIVER: "mysql"            # MariaDB 10.5.12+ (MySQL successor) offers significantly better performance compared to SQLite
      PHOTOPRISM_DATABASE_SERVER: "mariadb:3306"     # MariaDB database server (hostname:port)
      PHOTOPRISM_DATABASE_NAME: "photoprism"         # MariaDB database, see MARIADB_DATABASE in the mariadb service
      PHOTOPRISM_DATABASE_USER: "photoprism"         # MariaDB database username, must be the same as MARIADB_USER
      PHOTOPRISM_DATABASE_PASSWORD: "insecure"       # MariaDB database password, must be the same as MARIADB_PASSWORD
      PHOTOPRISM_SITE_CAPTION: "AI-Powered Photos App"
      PHOTOPRISM_SITE_DESCRIPTION: ""                # meta site description
      PHOTOPRISM_SITE_AUTHOR: ""                     # meta site author
      ## Run/install on first startup, see https://github.com/photoprism/photoprism/blob/develop/scripts/dist/Makefile:
      PHOTOPRISM_INIT: "https"                       # common options: update https tensorflow tensorflow-gpu intel gpu davfs yt-dlp
      ## Video Transcoding (https://docs.photoprism.app/getting-started/advanced/transcoding/):
      # PHOTOPRISM_FFMPEG_ENCODER: "software"        # H.264/AVC encoder (software, intel, nvidia, apple, raspberry, or vaapi)
      # PHOTOPRISM_FFMPEG_SIZE: "1920"               # video size limit in pixels (720-15360) (default: 3840)
      # PHOTOPRISM_FFMPEG_BITRATE: "32"              # video bitrate limit in Mbps (default: 60)
      ## Run as a non-root user after initialization (supported: 0, 33, 50-99, 500-600, and 900-1200):
      # PHOTOPRISM_UID: 1000
      # PHOTOPRISM_GID: 1000
      # PHOTOPRISM_UMASK: 0000
    ## Shared devices for video hardware transcoding (optional):
    ## see https://www.raspberrypi.com/documentation/accessories/camera.html#driver-differences-when-using-libcamera-or-the-legacy-stack
    # devices:
    #  - "/dev/video11:/dev/video11" # Video4Linux Video Encode Device (h264_v4l2m2m)
    working_dir: "/photoprism" # do not change or remove
    ## Storage Folders: "~" is a shortcut for your home directory, "." for the current directory
    volumes:
      # "/host/folder:/photoprism/folder"                # Example
      - "~/Pictures:/photoprism/originals"               # Original media files (DO NOT REMOVE)
      # - "/example/family:/photoprism/originals/family" # *Additional* media folders can be mounted like this
      # - "~/Import:/photoprism/import"                  # *Optional* base folder from which files can be imported to originals
      - "./storage:/photoprism/storage"                  # *Writable* storage folder for cache, database, and sidecar files (DO NOT REMOVE)

  ## MariaDB Database Server (recommended)
  ## see https://docs.photoprism.app/getting-started/faq/#should-i-use-sqlite-mariadb-or-mysql
  mariadb:
    image: yobasystems/alpine-mariadb:latest
    platform: "linux/arm"
    restart: unless-stopped
    stop_grace_period: 15s
    security_opt:
      - seccomp:unconfined
      - apparmor:unconfined
    command: --innodb-buffer-pool-size=256M --transaction-isolation=READ-COMMITTED --character-set-server=utf8mb4 --collation-server=utf8mb4_unicode_ci --max-connections=512 --innodb-rollback-on-timeout=OFF --innodb-lock-wait-timeout=120
    ## Never store database files on an unreliable device such as a USB flash drive, an SD card, or a shared network folder:
    volumes:
      - "./database:/var/lib/mysql" # DO NOT REMOVE
    ## For a list of supported environment variables, see https://hub.docker.com/r/yobasystems/alpine-mariadb/
    environment:
      MYSQL_AUTO_UPGRADE: "1"
      MYSQL_INITDB_SKIP_TZINFO: "1"
      MYSQL_ROOT_PASSWORD: "insecure"
      MYSQL_DATABASE: "photoprism"
      MYSQL_USER: "photoprism"
      MYSQL_PASSWORD: "insecure"
      MYSQL_CHARSET: "utf8mb4"

  ## Watchtower upgrades services automatically (optional)
  ## see https://docs.photoprism.app/getting-started/updates/#watchtower
  #
  # watchtower:
  #   restart: unless-stopped
  #   image: nickfedor/watchtower
  #   environment:
  #     WATCHTOWER_CLEANUP: "true"
  #     WATCHTOWER_POLL_INTERVAL: 7200 # checks for updates every 2 hours
  #   volumes:
  #     - "/var/run/docker.sock:/var/run/docker.sock"
  #     - "~/.docker/config.json:/config.json" # optional, for authentication if you have a Docker Hub account