src/display/editor/drawers/highlight.js - master - githubmirror/pdf.js

src/display/editor/drawers/highlight.js
374 строки11 KB
Jonas Jenwald
Remove the unused `HighlightOutline.prototype.classNamesForOutlining` getter
15 июн 2026, 13:02
15 июн 2026, 13:02f781ac3
/* Copyright 2023 Mozilla Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

import { BBOX_INIT, Util } from "../../../shared/util.js";
import { FreeDrawOutline, FreeDrawOutliner } from "./freedraw.js";
import { Outline } from "./outline.js";

class HighlightOutliner {
  #box;

  #firstPoint;

  #lastPoint;

  #verticalEdges = [];

  #intervals = [];

  /**
   * Construct an outliner.
   * @param {Array<Object>} boxes - An array of axis-aligned rectangles.
   * @param {number} borderWidth - The width of the border of the boxes, it
   *   allows to make the boxes bigger (or smaller).
   * @param {number} innerMargin - The margin between the boxes and the
   *   outlines. It's important to not have a null innerMargin when we want to
   *   draw the outline else the stroked outline could be clipped because of its
   *   width.
   * @param {boolean} isLTR - true if we're in LTR mode. It's used to determine
   *   the last point of the boxes.
   */
  constructor(boxes, borderWidth = 0, innerMargin = 0, isLTR = true) {
    const minMax = BBOX_INIT.slice();

    // We round the coordinates to slightly reduce the number of edges in the
    // final outlines.
    const NUMBER_OF_DIGITS = 4;
    const EPSILON = 10 ** -NUMBER_OF_DIGITS;

    // The coordinates of the boxes are in the page coordinate system.
    for (const { x, y, width, height } of boxes) {
      const x1 = Math.floor((x - borderWidth) / EPSILON) * EPSILON;
      const x2 = Math.ceil((x + width + borderWidth) / EPSILON) * EPSILON;
      const y1 = Math.floor((y - borderWidth) / EPSILON) * EPSILON;
      const y2 = Math.ceil((y + height + borderWidth) / EPSILON) * EPSILON;
      const left = [x1, y1, y2, true];
      const right = [x2, y1, y2, false];
      this.#verticalEdges.push(left, right);

      Util.rectBoundingBox(x1, y1, x2, y2, minMax);
    }

    const bboxWidth = minMax[2] - minMax[0] + 2 * innerMargin;
    const bboxHeight = minMax[3] - minMax[1] + 2 * innerMargin;
    const shiftedMinX = minMax[0] - innerMargin;
    const shiftedMinY = minMax[1] - innerMargin;
    let firstPointX = isLTR ? -Infinity : Infinity;
    let firstPointY = Infinity;
    const lastEdge = this.#verticalEdges.at(isLTR ? -1 : -2);
    const lastPoint = [lastEdge[0], lastEdge[2]];

    // Convert the coordinates of the edges into box coordinates.
    for (const edge of this.#verticalEdges) {
      const [x, y1, y2, left] = edge;
      if (!left && isLTR) {
        if (y1 < firstPointY) {
          firstPointY = y1;
          firstPointX = x;
        } else if (y1 === firstPointY) {
          firstPointX = Math.max(firstPointX, x);
        }
      } else if (left && !isLTR) {
        if (y1 < firstPointY) {
          firstPointY = y1;
          firstPointX = x;
        } else if (y1 === firstPointY) {
          firstPointX = Math.min(firstPointX, x);
        }
      }

      edge[0] = (x - shiftedMinX) / bboxWidth;
      edge[1] = (y1 - shiftedMinY) / bboxHeight;
      edge[2] = (y2 - shiftedMinY) / bboxHeight;
    }

    this.#box = new Float32Array([
      shiftedMinX,
      shiftedMinY,
      bboxWidth,
      bboxHeight,
    ]);
    this.#firstPoint = [firstPointX, firstPointY];
    this.#lastPoint = lastPoint;
  }

  getOutlines() {
    // We begin to sort lexicographically the vertical edges by their abscissa,
    // and then by their ordinate.
    this.#verticalEdges.sort(
      (a, b) => a[0] - b[0] || a[1] - b[1] || a[2] - b[2]
    );

    // We're now using a sweep line algorithm to find the outlines.
    // We start with the leftmost vertical edge, and we're going to iterate
    // over all the vertical edges from left to right.
    // Each time we encounter a left edge, we're going to insert the interval
    // [y1, y2] in the set of intervals.
    // This set of intervals is used to break the vertical edges into chunks:
    // we only take the part of the vertical edge that isn't in the union of
    // the intervals.
    const outlineVerticalEdges = [];
    for (const edge of this.#verticalEdges) {
      if (edge[3]) {
        // Left edge.
        outlineVerticalEdges.push(...this.#breakEdge(edge));
        this.#insert(edge);
      } else {
        // Right edge.
        this.#remove(edge);
        outlineVerticalEdges.push(...this.#breakEdge(edge));
      }
    }
    return this.#getOutlines(outlineVerticalEdges);
  }

  #getOutlines(outlineVerticalEdges) {
    const edges = [];
    const allEdges = new Set();

    for (const edge of outlineVerticalEdges) {
      const [x, y1, y2] = edge;
      edges.push([x, y1, edge], [x, y2, edge]);
    }

    // We sort lexicographically the vertices of each edge by their ordinate and
    // by their abscissa.
    // Every pair (v_2i, v_{2i + 1}) of vertices defines a horizontal edge.
    // So for every vertical edge, we're going to add the two vertical edges
    // which are connected to it through a horizontal edge.
    edges.sort((a, b) => a[1] - b[1] || a[0] - b[0]);
    for (let i = 0, ii = edges.length; i < ii; i += 2) {
      const edge1 = edges[i][2];
      const edge2 = edges[i + 1][2];
      edge1.push(edge2);
      edge2.push(edge1);
      allEdges.add(edge1);
      allEdges.add(edge2);
    }
    const outlines = [];
    let outline;

    while (allEdges.size > 0) {
      const edge = allEdges.values().next().value;
      let [x, y1, y2, edge1, edge2] = edge;
      allEdges.delete(edge);
      let lastPointX = x;
      let lastPointY = y1;

      outline = [x, y2];
      outlines.push(outline);

      while (true) {
        let e;
        if (allEdges.has(edge1)) {
          e = edge1;
        } else if (allEdges.has(edge2)) {
          e = edge2;
        } else {
          break;
        }

        allEdges.delete(e);
        [x, y1, y2, edge1, edge2] = e;

        if (lastPointX !== x) {
          outline.push(lastPointX, lastPointY, x, lastPointY === y1 ? y1 : y2);
          lastPointX = x;
        }
        lastPointY = lastPointY === y1 ? y2 : y1;
      }
      outline.push(lastPointX, lastPointY);
    }
    return new HighlightOutline(
      outlines,
      this.#box,
      this.#firstPoint,
      this.#lastPoint
    );
  }

  #binarySearch(y) {
    const array = this.#intervals;
    let start = 0;
    let end = array.length - 1;

    while (start <= end) {
      const middle = (start + end) >> 1;
      const y1 = array[middle][0];
      if (y1 === y) {
        return middle;
      }
      if (y1 < y) {
        start = middle + 1;
      } else {
        end = middle - 1;
      }
    }
    return end + 1;
  }

  #insert([, y1, y2]) {
    const index = this.#binarySearch(y1);
    this.#intervals.splice(index, 0, [y1, y2]);
  }

  #remove([, y1, y2]) {
    const index = this.#binarySearch(y1);
    for (let i = index; i < this.#intervals.length; i++) {
      const [start, end] = this.#intervals[i];
      if (start !== y1) {
        break;
      }
      if (start === y1 && end === y2) {
        this.#intervals.splice(i, 1);
        return;
      }
    }
    for (let i = index - 1; i >= 0; i--) {
      const [start, end] = this.#intervals[i];
      if (start !== y1) {
        break;
      }
      if (start === y1 && end === y2) {
        this.#intervals.splice(i, 1);
        return;
      }
    }
  }

  #breakEdge(edge) {
    const [x, y1, y2] = edge;
    const results = [[x, y1, y2]];
    const index = this.#binarySearch(y2);
    for (let i = 0; i < index; i++) {
      const [start, end] = this.#intervals[i];
      for (let j = 0, jj = results.length; j < jj; j++) {
        const [, y3, y4] = results[j];
        if (end <= y3 || y4 <= start) {
          // There is no intersection between the interval and the edge, hence
          // we keep it as is.
          continue;
        }
        if (y3 >= start) {
          if (y4 > end) {
            results[j][1] = end;
          } else {
            if (jj === 1) {
              return [];
            }
            // The edge is included in the interval, hence we remove it.
            results.splice(j, 1);
            j--;
            jj--;
          }
          continue;
        }
        results[j][2] = start;
        if (y4 > end) {
          results.push([x, end, y4]);
        }
      }
    }
    return results;
  }
}

class HighlightOutline extends Outline {
  #box;

  #outlines;

  constructor(outlines, box, firstPoint, lastPoint) {
    super();
    this.#outlines = outlines;
    this.#box = box;
    this.firstPoint = firstPoint;
    this.lastPoint = lastPoint;
  }

  toSVGPath() {
    const buffer = [];
    for (const polygon of this.#outlines) {
      let [prevX, prevY] = polygon;
      buffer.push(`M${prevX} ${prevY}`);
      for (let i = 2; i < polygon.length; i += 2) {
        const x = polygon[i];
        const y = polygon[i + 1];
        if (x === prevX) {
          buffer.push(`V${y}`);
          prevY = y;
        } else if (y === prevY) {
          buffer.push(`H${x}`);
          prevX = x;
        }
      }
      buffer.push("Z");
    }
    return buffer.join(" ");
  }

  /**
   * Serialize the outlines into the PDF page coordinate system.
   * @param {Array<number>} _bbox - the bounding box of the annotation.
   * @param {number} _rotation - the rotation of the annotation.
   * @returns {Array<Array<number>>}
   */
  serialize([blX, blY, trX, trY], _rotation) {
    const outlines = [];
    const width = trX - blX;
    const height = trY - blY;
    for (const outline of this.#outlines) {
      const points = new Array(outline.length);
      for (let i = 0; i < outline.length; i += 2) {
        points[i] = blX + outline[i] * width;
        points[i + 1] = trY - outline[i + 1] * height;
      }
      outlines.push(points);
    }
    return outlines;
  }

  get box() {
    return this.#box;
  }
}

class FreeHighlightOutliner extends FreeDrawOutliner {
  newFreeDrawOutline(outline, points, box, scaleFactor, innerMargin, isLTR) {
    return new FreeHighlightOutline(
      outline,
      points,
      box,
      scaleFactor,
      innerMargin,
      isLTR
    );
  }
}

class FreeHighlightOutline extends FreeDrawOutline {
  newOutliner(point, box, scaleFactor, thickness, isLTR, innerMargin = 0) {
    return new FreeHighlightOutliner(
      point,
      box,
      scaleFactor,
      thickness,
      isLTR,
      innerMargin
    );
  }
}

export { FreeHighlightOutliner, HighlightOutliner };