tests/t-local.sh - master - githubmirror/parted

tests/t-local.sh
196 строк5 KB
Brian C. Lane
Increase timeout for rmmod scsi_debug and make it a framework failure
02 май 2017, 19:18
02 май 2017, 19:1840e55a0
# Put test-related bits that are parted-specific here.
# This file is sourced from the testing framework.
sector_size_=${PARTED_SECTOR_SIZE:-512}

scsi_debug_lock_dir_="$abs_srcdir/scsi_debug.lock"

require_scsi_debug_module_()
{
  require_udevadm_settle_
  # check for scsi_debug module
  modprobe -n scsi_debug ||
    skip_ "you lack the scsi_debug kernel module"
}

scsi_debug_modprobe_succeeded_=

# Always run this cleanup function.
cleanup_final_() { scsi_debug_cleanup_; }

scsi_debug_cleanup_()
{
  # This function must always release the lock.
  # If modprobe succeeded, it must be sure to run rmmod.
  if test -n "$scsi_debug_modprobe_succeeded_"; then
    # We have to insist.  Otherwise, a single rmmod usually fails to remove it,
    # due either to "Resource temporarily unavailable" or to
    # "Module scsi_debug is in use".
    i=0
    udevadm settle
    while [ $i -lt 40 ] ; do
      rmmod scsi_debug \
	&& { test "$VERBOSE" = yes && warn_ $ME_ rmmod scsi_debug...; break; }
      sleep .2 || sleep 1
      i=$((i + 1))
    done
    udevadm settle
    test $i = 40 && framework_failure_ rmmod scsi_debug failed.
  fi
  rm -fr $scsi_debug_lock_dir_
}

# Helper function: wait 2s (via .1s increments) for FILE to appear.
# Usage: wait_for_dev_to_appear_ /dev/sdg
# Return 0 upon success, 1 upon failure.
wait_for_dev_to_appear_()
{
  local file=$1
  local i=0
  local incr=1
  while :; do
    udevadm settle
    ls "$file" > /dev/null 2>&1 && return 0
    sleep .1 2>/dev/null || { sleep 1; incr=10; }
    i=$(expr $i + $incr); test $i = 20 && break
  done
  return 1
}

# Tests that uses "modprobe scsi_debug ..." must not be run in parallel.
scsi_debug_acquire_lock_()
{
  local retries=20
  local lock_timeout_stale_seconds=120

  # If it was created more than $lock_timeout_stale_seconds ago, remove it.
  # FIXME: implement this

  local i=0
  local incr=1
  while :; do
    mkdir "$scsi_debug_lock_dir_" && return 0
    sleep .1 2>/dev/null || { sleep 1; incr=10; }
    i=$(expr $i + $incr); test $i = $(expr $retries \* 10) && break
  done

  warn_ "$ME_: failed to acquire lock: $scsi_debug_lock_dir_"
  return 1
}

# If there is a scsi_debug device, print the corresponding "sdN" and return 0.
# Otherwise, return 1.
new_sdX_()
{
  local m; m=$(grep -lw scsi_debug /sys/block/sd*/device/model) || return 1

  # Remove the /sys/block/ prefix, and then the /device/model suffix.
  m=${m#/sys/block/}
  m=${m%/device/model}
  echo "$m"
  return 0
}

# Create a device using the scsi_debug module with the options passed to
# this function as arguments.  Upon success, print the name of the new device.
scsi_debug_setup_()
{
  scsi_debug_acquire_lock_

  # It is not trivial to determine the name of the device we're creating.
  # Record the names of all /sys/block/sd* devices *before* probing:
  touch stamp
  modprobe scsi_debug opt_blks=64 "$@" || { rm -f stamp; return 1; }
  scsi_debug_modprobe_succeeded_=1
  test "$VERBOSE" = yes \
    && echo $ME_ modprobe scsi_debug succeeded 1>&2

  # Wait up to 2s (via .1s increments) for the list of devices to change.
  # Sleeping for a fraction of a second requires GNU sleep, so fall
  # back on sleeping 2x1s if that fails.
  # FIXME-portability: using "cmp - ..." probably requires GNU cmp.
  local incr=1
  local i=0
  local new_dev
  while :; do
    udevadm settle
    new_dev=$(new_sdX_) && break
    sleep .1 2>/dev/null || { sleep 1; incr=10; }
    i=$(expr $i + $incr); test $i = 20 && break
  done

  case $new_dev in
    sd[a-z]) ;;
    sd[a-z][a-z]) ;;
    *) warn_ $ME_ unexpected device name: $new_dev; return 1 ;;
  esac
  local t=/dev/$new_dev
  wait_for_dev_to_appear_ $t
  echo $t
  return 0
}

require_512_byte_sector_size_()
{
  test $sector_size_ = 512 \
      || skip_ FS test with sector size != 512
}

peek_()
{
  case $# in 2) ;; *) echo "usage: peek_ FILE 0_BASED_OFFSET" >&2; exit 1;; esac
  case $2 in *[^0-9]*) echo "peek_: invalid offset: $2" >&2; exit 1 ;; esac
  dd if="$1" bs=1 skip="$2" count=1
}

poke_()
{
  case $# in 3) ;; *) echo "usage: poke_ FILE 0_BASED_OFFSET BYTE" >&2; exit 1;;
    esac
  case $2 in *[^0-9]*) echo "poke_: invalid offset: $2" >&2; exit 1 ;; esac
  case $3 in ?) ;; *) echo "poke_: invalid byte: '$3'" >&2; exit 1 ;; esac
  printf %s "$3" | dd of="$1" bs=1 seek="$2" count=1 conv=notrunc
}

# byte 56 of the partition entry is the first byte of its 72-byte name field
gpt1_pte_name_offset_()
{
  local ss=$1
  case $ss in *[^0-9]*) echo "$0: invalid sector size: $ss">&2; return 1;; esac
  expr $ss \* 2 + 56
  return 0
}

# Change the name of the first partition in the primary GPT table,
# thus invalidating the PartitionEntryArrayCRC32 checksum.
gpt_corrupt_primary_table_()
{
  case $# in 2) ;; *) echo "$0: expected 2 args, got $#" >&2; return 1;; esac
  local dev=$1
  local ss=$2
  case $ss in *[^0-9]*) echo "$0: invalid sector size: $ss">&2; return 1;; esac

  # get the first byte of the name
  local orig_pte_name_byte
  orig_pte_name_byte=$(peek_ $dev $(gpt1_pte_name_offset_ $ss)) || return 1

  local new_byte
  test x"$orig_pte_name_byte" = xA && new_byte=B || new_byte=A

  # Replace with a different byte
  poke_ $dev $(gpt1_pte_name_offset_ $ss) "$new_byte" || return 1

  printf %s "$orig_pte_name_byte"
  return 0
}

gpt_restore_primary_table_()
{
  case $# in 3) ;; *) echo "$0: expected 2 args, got $#" >&2; return 1;; esac
  local dev=$1
  local ss=$2
  case $ss in *[^0-9]*) echo "$0: invalid sector size: $ss">&2; return 1;; esac
  local orig_byte=$3
  poke_ $dev $(gpt1_pte_name_offset_ $ss) "$orig_byte" || return 1
}

. "$abs_top_srcdir/tests/t-lvm.sh"