make/PreInitSupport.gmk - master - githubmirror/panama-vector

make/PreInitSupport.gmk
292 строки12 KB
Magnus Ihse Bursie
8349665: Make clean removes module-deps.gmk
28 май 2025, 01:41
28 май 2025, 01:41f25f4a3
#
# Copyright (c) 2011, 2025, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#

################################################################################
# Helper functions for PreInit.gmk, the initial part of initialization before
# the SPEC file is loaded. Most of these functions provide parsing and setting
# up make options from the command-line.
################################################################################

# Include the corresponding closed file, if present.
ifneq ($(CUSTOM_MAKE_DIR), )
  -include $(CUSTOM_MAKE_DIR)/PreInitSupport-pre.gmk
endif

# COMMA is defined in spec.gmk, but that is not included yet
COMMA := ,

# Essential control variables that are handled by PreInit.gmk or Init.gmk
INIT_CONTROL_VARIABLES := LOG CONF CONF_NAME SPEC JOBS CONF_CHECK ALLOW \
    COMPARE_BUILD

# All known make control variables; these are handled in other makefiles
MAKE_CONTROL_VARIABLES += JDK_FILTER SPEC_FILTER \
    TEST TEST_JOBS JTREG GTEST MICRO TEST_OPTS TEST_VM_OPTS TEST_DEPS

ALL_CONTROL_VARIABLES := $(INIT_CONTROL_VARIABLES) $(MAKE_CONTROL_VARIABLES)

# Define a simple reverse function.
# Should maybe move to MakeBase.gmk, but we can't include that file now.
reverse = \
    $(if $(strip $(1)), $(call reverse, $(wordlist 2, $(words $(1)), $(1)))) \
        $(firstword $(1))

# The variable MAKEOVERRIDES contains variable assignments from the command
# line, but in reverse order to what the user entered.
# The '§' <=> '\ 'dance is needed to keep values with space in them connected.
COMMAND_LINE_VARIABLES := $(subst §,\ , $(call reverse, $(subst \ ,§,$(MAKEOVERRIDES))))

# A list like FOO="val1" BAR="val2" containing all user-supplied make
# variables that we should propagate.
# The '§' <=> '\ 'dance is needed to keep values with space in them connected.
# This explicit propagation is needed to avoid problems with characters that needs
# escaping.
USER_MAKE_VARS := $(subst §,\ , $(filter-out $(addsuffix =%, $(ALL_CONTROL_VARIABLES)), \
    $(subst \ ,§,$(MAKEOVERRIDES))))

# Setup information about available configurations, if any.
ifneq ($(CUSTOM_ROOT), )
  build_dir := $(CUSTOM_ROOT)/build
else
  build_dir := $(TOPDIR)/build
endif
all_spec_files := $(wildcard $(build_dir)/*/spec.gmk)
# Extract the configuration names from the path
all_confs := $(patsubst %/spec.gmk, %, $(patsubst $(build_dir)/%, %, $(all_spec_files)))

# Check for unknown command-line variables
define CheckControlVariables
  command_line_variables := $$(strip $$(foreach var, \
      $$(subst \ ,_,$$(MAKEOVERRIDES)), \
      $$(firstword $$(subst =, , $$(var)))))
  allowed_command_line_variables := $$(strip $$(subst $$(COMMA), , $$(ALLOW)))
  unknown_command_line_variables := $$(strip \
      $$(filter-out $$(ALL_CONTROL_VARIABLES) $$(allowed_command_line_variables), \
      $$(command_line_variables)))
  ifneq ($$(unknown_command_line_variables), )
    $$(info Note: Command line contains non-control variables:)
    $$(foreach var, $$(unknown_command_line_variables), $$(info * $$(var)=$$($$(var))))
    $$(info Make sure it is not mistyped, and that you intend to override this variable.)
    $$(info 'make help' will list known control variables.)
    $$(info )
  endif
endef

# Check for invalid make flags like -j
define CheckInvalidMakeFlags
  # This is a trick to get this rule to execute before any other rules
  # MAKEFLAGS only indicate -j if read in a recipe (!)
  $$(TOPDIR)/make/PreInit.gmk: .FORCE
	$$(if $$(findstring --jobserver, $$(MAKEFLAGS)), \
	    $$(info Error: 'make -jN' is not supported, use 'make JOBS=N') \
	    $$(error Cannot continue) \
	)
  .FORCE:
  .PHONY: .FORCE
endef

# Check that the CONF_CHECK option is valid and set up handling
define ParseConfCheckOption
  ifeq ($$(CONF_CHECK), )
    # Default behavior is fail
    CONF_CHECK := fail
  else ifneq ($$(filter-out auto fail ignore, $$(CONF_CHECK)), )
    $$(info Error: CONF_CHECK must be one of: auto, fail or ignore.)
    $$(error Cannot continue)
  endif
endef

define ParseConfAndSpec
  ifneq ($$(origin SPEC), undefined)
    # We have been given a SPEC, check that it works out properly
    ifneq ($$(origin CONF), undefined)
      # We also have a CONF argument. We can't have both.
      $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)
      $$(error Cannot continue)
    endif
    ifneq ($$(origin CONF_NAME), undefined)
      # We also have a CONF_NAME argument. We can't have both.
      $$(info Error: Cannot use CONF_NAME=$$(CONF_NAME) and SPEC=$$(SPEC) at the same time. Choose one.)
      $$(error Cannot continue)
    endif
    ifeq ($$(wildcard $$(SPEC)), )
      $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).)
      $$(error Cannot continue)
    endif
    ifeq ($$(filter /%, $$(SPEC)), )
      # If given with relative path, make it absolute
      SPECS := $$(CURDIR)/$$(strip $$(SPEC))
    else
      SPECS := $$(SPEC)
    endif

    # For now, unset this SPEC variable.
    override SPEC :=
  else
    # Use spec.gmk files in the build output directory
    ifeq ($$(all_spec_files), )
      ifneq ($(CUSTOM_ROOT), )
        $$(info Error: No configurations found for $$(CUSTOM_ROOT).)
      else
        $$(info Error: No configurations found for $$(TOPDIR).)
      endif
      $$(info Please run 'bash configure' to create a configuration.)
      $$(info )
      $$(error Cannot continue)
    endif

    ifneq ($$(origin CONF_NAME), undefined)
      ifneq ($$(origin CONF), undefined)
        # We also have a CONF argument. We can't have both.
        $$(info Error: Cannot use CONF=$$(CONF) and CONF_NAME=$$(CONF_NAME) at the same time. Choose one.)
        $$(error Cannot continue)
      endif
      matching_conf := $$(strip $$(filter $$(CONF_NAME), $$(all_confs)))
      ifeq ($$(matching_conf), )
        $$(info Error: No configurations found matching CONF_NAME=$$(CONF_NAME).)
        $$(info Available configurations in $$(build_dir):)
        $$(foreach var, $$(all_confs), $$(info * $$(var)))
        $$(error Cannot continue)
      else ifneq ($$(words $$(matching_conf)), 1)
        $$(info Error: Matching more than one configuration CONF_NAME=$$(CONF_NAME).)
        $$(info Available configurations in $$(build_dir):)
        $$(foreach var, $$(all_confs), $$(info * $$(var)))
        $$(error Cannot continue)
      else
        $$(info Building configuration '$$(matching_conf)' (matching CONF_NAME=$$(CONF_NAME)))
      endif
      # Create a SPEC definition. This will contain the path to exactly one spec file.
      SPECS := $$(build_dir)/$$(matching_conf)/spec.gmk
    else ifneq ($$(origin CONF), undefined)
      # User have given a CONF= argument.
      ifeq ($$(CONF), )
        # If given CONF=, match all configurations
        matching_confs := $$(strip $$(all_confs))
      else
        # Otherwise select those that contain the given CONF string
        ifeq ($$(patsubst !%,,$$(CONF)), )
          # A CONF starting with ! means we should negate the search term
          matching_confs := $$(strip $$(foreach var, $$(all_confs), \
              $$(if $$(findstring $$(subst !,,$$(CONF)), $$(var)), ,$$(var))))
        else
          matching_confs := $$(strip $$(foreach var, $$(all_confs), \
              $$(if $$(findstring $$(CONF), $$(var)), $$(var))))
        endif
        ifneq ($$(filter $$(CONF), $$(matching_confs)), )
          ifneq ($$(word 2, $$(matching_confs)), )
            # Don't repeat this output on make restarts caused by including
            # generated files.
            ifeq ($$(MAKE_RESTARTS), )
              $$(info Using exact match for CONF=$$(CONF) (other matches are possible))
            endif
          endif
          # If we found an exact match, use that
          matching_confs := $$(CONF)
        endif
      endif
      ifeq ($$(matching_confs), )
        $$(info Error: No configurations found matching CONF=$$(CONF).)
        $$(info Available configurations in $$(build_dir):)
        $$(foreach var, $$(all_confs), $$(info * $$(var)))
        $$(error Cannot continue)
      else
        # Don't repeat this output on make restarts caused by including
        # generated files.
        ifeq ($$(MAKE_RESTARTS), )
          ifeq ($$(words $$(matching_confs)), 1)
            ifneq ($$(findstring $$(LOG_LEVEL), info debug trace), )
              $$(info Building configuration '$$(matching_confs)' (matching CONF=$$(CONF)))
            endif
          else
            $$(info Building these configurations (matching CONF=$$(CONF)):)
            $$(foreach var, $$(matching_confs), $$(info * $$(var)))
          endif
        endif
      endif

      # Create a SPEC definition. This will contain the path to one or more spec.gmk files.
      SPECS := $$(addsuffix /spec.gmk, $$(addprefix $$(build_dir)/, $$(matching_confs)))
    else
      # No CONF or SPEC given, check the available configurations
      ifneq ($$(words $$(all_spec_files)), 1)
        $$(info Error: No CONF given, but more than one configuration found.)
        $$(info Available configurations in $$(build_dir):)
        $$(foreach var, $$(all_confs), $$(info * $$(var)))
        $$(info Please retry building with CONF=<config pattern> (or SPEC=<spec file>).)
        $$(info )
        $$(error Cannot continue)
      endif

      # We found exactly one configuration, use it
      SPECS := $$(strip $$(all_spec_files))
    endif
  endif
endef

# Extract main targets from Main.gmk using the spec provided in $2.
#
# Param 1: FORCE = force generation of main-targets.gmk or LAZY = do not force.
# Param 2: The SPEC file to use.
define DefineMainTargets
  SPEC_FILE := $(strip $2)

  # We will start by making sure the main-targets.gmk file is removed, if
  # make has not been restarted. By the -include, we will trigger the
  # rule for generating the file (which is never there since we removed it),
  # thus generating it fresh, and make will restart, incrementing the restart
  # count.
  main_targets_file := $$(dir $$(SPEC_FILE))make-support/main-targets.gmk

  ifeq ($$(MAKE_RESTARTS), )
    # Only do this if make has not been restarted, and if we do not force it.
    ifeq ($(strip $1), FORCE)
      $$(shell rm -f $$(main_targets_file))
    endif
  endif

  $$(main_targets_file):
	@( cd $$(TOPDIR) && \
	$$(MAKE) $$(MAKE_LOG_FLAGS) -s -r -R -f $$(TOPDIR)/make/GenerateFindTests.gmk \
	    -I $$(TOPDIR)/make/common SPEC=$$(SPEC_FILE) TOPDIR_ALT=$$(TOPDIR))
	@( cd $$(TOPDIR) && \
	$$(MAKE) $$(MAKE_LOG_FLAGS) -s -r -R -f $$(TOPDIR)/make/Main.gmk \
	    -I $$(TOPDIR)/make/common SPEC=$$(SPEC_FILE) TOPDIR_ALT=$$(TOPDIR) \
	    UPDATE_MODULE_DEPS=true NO_RECIPES=true \
	    $$(MAKE_LOG_VARS) \
	    create-main-targets-include )

  # Now include main-targets.gmk. This will define ALL_MAIN_TARGETS.
  -include $$(main_targets_file)
endef

define PrintConfCheckFailed
	@echo ' '
	@echo "Please rerun configure! Easiest way to do this is by running"
	@echo "'make reconfigure'."
	@echo "This behavior may also be changed using CONF_CHECK=<ignore|auto>."
	@echo ' '
endef

################################################################################