completions/_nvme - master - githubmirror/nvme-cli

completions/_nvme
2 985 строк106 KB
Daniel Wagner
nvme: move key commands into new keys plugin
29 июл 2026, 18:31
29 июл 2026, 18:3141efe36
#compdef _nvme nvme
# SPDX-License-Identifier: GPL-2.0-or-later

# zsh completions for the nvme command-line interface,
# very loosely based on git and adb command completion
# Kelly Kaoudis kelly.n.kaoudis at intel.com, June 2015

_nvme () {
	local -a _cmds
	_cmds=(
	'list:identify basic information for all NVMe namespaces'
	'list-subsys:identify information for subsystems'
	'id-ctrl:display information about the controller'
	'id-ns:display information about the namespace'
	'id-ns-granularity:display namespace granularity list'
	'id-ns-lba-format:display information about the namespace capability fields for specific LBA format'
	'list-ns:identify all namespace(s) attached'
	'cmdset-ind-id-ns:display I/O Command Set Independent information about the namespace'
	'id-iocs:display information about I/O command sets'
	'id-domain:display information about domain list'
	'create-ns:create a new namespace before attachment'
	'delete-ns:delete a detached namespace'
	'attach-ns:attach namespace to controller'
	'detach-ns:detach namespace from controller'
	'list-ctrl:identify all controller(s) attached'
	'nvm-id-ctrl:display information about the nvm command set'
	'nvm-id-ns:display information about the namespace of nvm command set'
	'nvm-id-ns-lba-format:display information about the namespace of nvm command set capability fields for specific LBA format'
	'primary-ctrl-caps:display primary controller capabilities'
	'list-secondary:identify secondary controller list associated with the primary controller'
	'ns-descs:display namespace identification descriptors'
	'id-nvmset:display entries for NVM Set identifiers'
	'id-uuid:display list of supported Vendor Specific UUIDs'
	'list-endgrp:display information about nvme endurance group list'
	'get-ns-id:get namespace id of opened block device'
	'get-log:retrieve any log in raw format'
	'predictable-lat-log:retrieve predictable latency per nvmset log'
	'pred-lat-event-agg-log:retrieve predictable latency event aggregate log'
	'persistent-event-log:retrieve persistent event log'
	'telemetry-log:retrieve telemetry log'
	'fw-log:retrieve fw log'
	'changed-ns-list-log:retrieve changed namespaces log'
	'smart-log:retrieve SMART log'
	'smart-log-add:retrieve additional SMART log'
	'ana-log:retrieve ANA log'
	'error-log:retrieve error log'
	'effects-log:retrieve command effects log page and print the table'
	'endurance-log:retrieves endurance groups log page and prints the log'
	'endurance-event-agg-log:retrieve endurance group event aggregate log'
	'lba-status-log:retrieve lba status log'
	'resv-notif-log:retrieve reservation notification log'
	'get-feature:display a controller feature'
	'device-self-test:implementing the device self-test feature'
	'self-test-log:retrieve the self-test log'
	'set-feature:set a controller feature and show results'
	'set-property:writes and shows the defined NVMe controller property for NVMe over Fabric'
	'get-property:Reads and shows the defined NVMe controller property for NVMe over Fabric'
	'format:apply new block format to namespace'
	'fw-commit:verify and commit firmware to a specific slot (fw-activate in old version < 1.2)'
	'fw-download:download a firmware to the device'
	'admin-passthru:submit a passthrough admin command IOCTL'
	'io-passthru:submit a passthrough io command IOCTL'
	'security-send:send security/secure data to controller'
	'security-recv:ask for security/secure data from controller'
	'get-lba-status:display information about potentially unrecoverable LBAs'
	'resv-acquire:acquire reservation on a namespace'
	'resv-register:register reservation on a namespace'
	'resv-release:release reservation on a namespace'
	'resv-report:report reservation on a namespace'
	'dsm:submit a Data Set Management command'
	'copy:submit a simple copy command'
	'flush:submit a flush'
	'compare:compare data on device to data elsewhere'
	'read:submit a read command'
	'write:submit a write command'
	'capacity-mgmt:submit capacity management command'
	'write-zeroes:submit an NVMe write zeroes command'
	'write-uncor:submit an NVMe write uncorrectable command'
	'verify:submit an NVMe Verify command'
	'sanitize:submit a sanitize command'
	'sanitize-log:retrieve sanitize log and show it'
	'reset:reset the NVMe controller'
	'subsystem-reset:reset the NVMe subsystem'
	'ns-rescan:rescan the NVMe namespaces'
	'show-regs:show the controller registers; require admin character device'
	'boot-part-log:retrieve boot partition log'
	'power-measurement-log:retrieve power measurement log'
	'fid-support-effects-log:retrieve fid support and effects log'
	'supported-log-pages:retrieve support log pages details'
	'lockdown:submit a lockdown command'
	'media-unit-stat-log:retrieve media unit status log pages details'
	'supported-cap-config-log:retrieve the list of Supported Capacity Configuration Descriptors'
	'rotational-media-info-log:retrieve rotational media information log'
	'discover:send Get Log Page request to Discovery Controller'
	'connect-all:discover NVMeoF subsystems and connect to them'
	'connect:connect to NVMeoF subsystem'
	'dim:send Discovery Information Management command to a Discovery Controller (DC)'
	'disconnect:disconnect from NVMeoF subsystem'
	'disconnect-all:disconnect from all connected NVMeoF subsystems'
	'gen-hostnqn:generate a host NVMe Qualified Name'
	'show-hostnqn:show the host NQN configured for the system'
	'dir-receive:read directive parameters of the specified directive type'
	'dir-send:set directive parameters of the specified directive type'
	'virt-mgmt:submit a Virtualization Management command'
	'rpmb:submit an NVMe RPMB command'
	'show-topology:show subsystem topology'
	'nvme-mi-recv:send a NVMe-MI receive command'
	'nvme-mi-send:send a NVMe-MI send command'
	'get-reg:read and show the defined NVMe controller register'
	'set-reg:write and show the defined NVMe controller register'
	'io-mgmt-recv:send an I/O management receive command'
	'io-mgmt-send:send an I/O management send command'
	'mgmt-addr-list-log:retrieve management address list log'
	'changed-ns-list-log:retrieve changed allocated namespaces log'
	'dispersed-ns-participating-nss-log:retrieve dispersed namespace participating NVM subsystems log'
	'reachability-groups-log:retrieve reachability groups log'
	'reachability-associations-log:retrieve reachability associations log'
	'host-discovery-log:retrieve host discovery log'
	'ave-discovery-log:retrieve ave discovery log'
	'pull-model-ddr-req-log:retrieve pull model ddr req log'
	'version:show the program version'
	'ocp:OCP cloud SSD extensions'
	'solidigm:Solidigm plug-in extensions'
	'fdp:FDP plug-in extensions'
	'micron:Micron plug-in extensions'
	'mangoboost:MangoBoost plug-in extensions'
	'dapustor:DapuStor plug-in extensions'
	'help:print brief descriptions of all nvme commands'
	'json:dump output in json format'
	)

	local expl

	_arguments '*:: :->subcmds' && return 0

	if (( CURRENT == 1 )); then
		_describe -t commands "nvme subcommands" _cmds
		return
	elif (( CURRENT > 2 )); then
		case ${words[1]} in
		(ocp)
			case ${words[2]} in
			(smart-add-log)
				local _smart_add_log
				_smart_add_log=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp smart-add-log options" _smart_add_log
				;;
			(latency-monitor-log)
				local _latency_monitor_log
				_latency_monitor_log=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp latency-monitor-log options" _latency_monitor_log
				;;
			(set-latency-monitor-feature)
				local _set_latency_monitor_feature
				_set_latency_monitor_feature=(
				/dev/nvme':supply a device to use (required)'
				--active_bucket_timer_threshold=':Active Bucket Timer Threshold'
				-t':alias for --active_bucket_timer_threshold'
				--active_threshold_a=':Active Threshold A'
				-a':alias for --active_threshold_a'
				--active_threshold_a=':Active Threshold B'
				-b':alias for --active_threshold_b'
				--active_threshold_c=':Active Threshold C'
				-c':alias for --active_threshold_c'
				--active_threshold_d=':Active Threshold D'
				-d':alias for --active_threshold_d'
				--active_latency_config=':Active Latency Configuration'
				-f':alias for --active_latency_config'
				--active_latency_minimum_window=':Active Latency Minimum Window'
				-w':alias for --active_latency_minimum_window'
				--debug_log_trigger_enable='Debug Log Trigger Enable'
				-r':alias for --debug_log_trigger_enable'
				--discard_debug_log='Discard Debug Log'
				-l':alias for --discard_debug_log'
				--latency_monitor_feature_enable='Latency Monitor Feature Enable'
				-e':alias for --latency_monitor_feature_enable'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp set-latency-monitor-feature options" _set_latency_monitor_feature
				;;
			(internal-log)
				local _internal_log
				_internal_log=(
				/dev/nvme':supply a device to use (required)'
				--telemetry-type=':Telemetry Type; host, host0, host1 or controller generated'
				-t':alias for --telemetry-type'
				--data-area=':Telemetry Data Area; 1, 2, 3, or 4'
				-a':alias for --data-area'
				--output-file=':Output file name with path'
				-f':alias for --output-file'
				--telemetry-log=':Telemetry log binary'
				-l':alias for --telemetry-log'
				--string-log=':String log binary'
				-s':alias for --string-log'
				--output-format':Output format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp internal-log options" _internal_log
				;;
			(clear-fw-activate-history)
				local _clear_fw_activate_history
				_clear_fw_activate_history=(
				/dev/nvme':supply a device to use (required)'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp clear-fw-activate-history options" _clear_fw_activate_history
				;;
			(eol-plp-failure-mode)
				local _eol_plp_failure_mode
				_eol_plp_failure_mode=(
				/dev/nvme':supply a device to use (required)'
				--mode=':0-3: default/rom/wtm/normal'
				-m':alias for --mode'
				--save':Specifies that the controller shall save the attribute'
				-s':alias for --save'
				--sel=':0-3,8: current/default/saved/supported/changed:'
				-S':alias for --sel'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp eol-plp-failure-mode options" _eol_plp_failure_mode
				;;
			(clear-pcie-correctable-errors)
				local _clear_pcie_correctable_errors
				_clear_pcie_correctable_errors=(
				/dev/nvme':supply a device to use (required)'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp clear-pcie-correctable-errors options" _clear_pcie_correctable_errors
				;;
			(fw-activate-history)
				local _fw_activate_history
				_fw_activate_history=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp fw-activate-history options" _fw_activate_history
				;;
			(device-capability-log)
				local _device_capability_log
				_device_capability_log=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json|binary'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp device-capability-log options" _device_capability_log
				;;
			(set-dssd-power-state-feature)
				local _set_dssd_power_state_feature
				_set_dssd_power_state_feature=(
				/dev/nvme':supply a device to use (required)'
				--power-state=':DSSD Power State to set in watts'
				-p':alias for --power-state'
				--save':Specifies that the controller shall save the attribute'
				-s':alias for --save'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp set-dssd-power-state-feature options" _set_dssd_power_state_feature
				;;
			(get-dssd-power-state-feature)
				local _get_dssd_power_state_feature
				_get_dssd_power_state_feature=(
				/dev/nvme':supply a device to use (required)'
				--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
				-S':alias to --sel'
				--all=':Print out all 3 values at once - current, default, and saved'
				-a':alias to --all'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-dssd-power-state-feature options" _get_dssd_power_state_feature
				;;
			(telemetry-string-log)
				local _telemetry_string_log
				_telemetry_string_log=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json|binary'
				-o':alias for --output-format'
				--output-file=':Output file name with path'
				-f':alias for --output-file'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp telemetry-string-log options" _telemetry_string_log
				;;
			(set-dssd-async-event-config)
				local _set_dssd_async_event_config
				_set_dssd_async_event_config=(
				/dev/nvme':supply a device to use (required)'
				--enable-panic-notices':Specifies whether an asynchronous event notification
				is sent to the host for a panic event'
				-e':alias for --enable-panic-notices'
				--save':Specifies that the controller shall save the attribute'
				-s':alias for --save'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp set-dssd-async-event-config options" _set_dssd_async_event_config
				;;
			(get-dssd-async-event-config)
				local _get_dssd_async_event_config
				_get_dssd_async_event_config=(
				/dev/nvme':supply a device to use (required)'
				--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
				-S':alias to --sel'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-dssd-async-event-config options" _get_dssd_async_event_config
				;;
			(tcg-configuration-log)
				local _ocp_tcg_configuration_log
				_ocp_tcg_configuration_log=(
				/dev/nvme':supply a device to use (required)'
				--output-format=':Output format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp tcg-configuration-log options" _ocp_tcg_configuration_log
				;;
			(get-error-injection)
				local _get_error_injection
				_get_error_injection=(
				/dev/nvme':supply a device to use (required)'
				--sel=':0-3: current/default/saved/supported/changed:'
				-s':alias for --sel'
				--no-uuid':Skip UUID index search'
				-n':alias for --no-uuid'
				--all-ns':Send the command to all namespaces'
				-a':alias for --all-ns'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-error-injection options" _get_error_injection
				;;
			(set-error-injection)
				local _set_error_injection
				_set_error_injection=(
				/dev/nvme':supply a device to use (required)'
				--data=':Error injection data structure entries'
				-d':alias for --data'
				--number=':Number of valid error injection data entries'
				-n':alias for --number'
				--no-uuid':Skip UUID index search'
				-N':alias for --no-uuid'
				--type=':Error injection type'
				-t':alias for --type'
				--nrtdp=':Number of reads to trigger device panic'
				-r':alias for --nrtdp'
				--verbose':Increase the information detail in the output.'
				-v':alias for --verbose'
				--output-format=':Output format: normal|json|binary'
				-o ':alias for --output-format'
				--timeout=':value for timeout'
				--all-ns':Send the command to all namespaces'
				-a':alias for --all-ns'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp set-error-injection options" _set_error_injection
				;;
			(hardware-component-log)
				local _hardware_component_log
				_hardware_component_log=(
				/dev/nvme':supply a device to use (required)'
				--comp-id=':component identifier'
				-i':alias for --comp-id'
				--list':list component descriptions'
				-l':alias for --list'
				--verbose':Increase the information detail in the output.'
				-v':alias for --verbose'
				--output-format=':Output format: normal|json|binary'
				-o ':alias for --output-format'
				--timeout=':value for timeout'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp hardware-component-log options" _hardware_component_log
			(set-telemetry-profile)
				local _ocp_set_telemetry_profile_feature
				_ocp_set_telemetry_profile_feature=(
				/dev/nvme':supply a device to use (required)'
				--telemetry-profile-select=':Telemetry Profile Select'
				-t':alias for --telemetry-profile-select'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp set-telemetry-profile options" _ocp_set_telemetry_profile_feature
				;;
			(get-latency-monitor)
				local _ocp_get_latency_monitor_feature
				_ocp_get_latency_monitor_feature=(
				/dev/nvme':supply a device to use (required)'
				--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
				-s':alias to --sel'
				--namespace-id=':valid, invalid and inactive nsid'
				-n':alias to --namespace-id'
				--no-uuid':Skip UUID index search'
				-u':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-latency-monitor options" _ocp_get_latency_monitor_feature
				;;
			(get-clear-pcie-correctable-errors)
				local _get_clear_pcie_correctable_error_counters
				_get_clear_pcie_correctable_error_counters=(
				/dev/nvme':supply a device to use (required)'
				--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
				-s':alias to --sel'
				--namespace-id=':valid, invalid and inactive nsid'
				-n':alias to --namespace-id'
				--no-uuid':Skip UUID index search'
				-u':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-clear-pcie-correctable-errors options" _get_clear_pcie_correctable_error_counters
				;;
			(get-telemetry-profile)
				local _ocp_get_telemetry_profile_feature
				_ocp_get_telemetry_profile_feature=(
				/dev/nvme':supply a device to use (required)'
				--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
				-s':alias to --sel'
				--namespace-id=':valid, invalid and inactive nsid'
				-n':alias to --namespace-id'
				--no-uuid':Skip UUID index search'
				-u':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme ocp get-telemetry-profile options" _ocp_get_telemetry_profile_feature
				;;
			(*)
				_files
				;;
			esac
			;;
		(solidigm)
			case ${words[2]} in
			(id-ctrl)
				local _id_ctrl
				_id_ctrl=(
				--verbose':Increase output verbosity'
				-v':alias for --verbose'
				--output-format':Output format: normal|json|binary'
				-o':alias for --output-format'
				--vendor-specific':dump binary vendor field'
				-V':alias for --vendor-specific'
				--raw-binary':show identify in binary format'
				-b':alias for --raw-binary'
				--human-readable':show identify in readable format'
				-H':alias for --human-readable'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm id-ctrl options" _id_ctrl
				;;
			(smart-log-add)
				local _smart_log_add
				_smart_log_add=(
				--namespace-id':(optional) desired namespace'
				-n':alias for --namespace-id'
				--output-format':Output format: normal|json|binary'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm smart-log-add options" _smart_log_add
				;;
			(vs-smart-add-log)
				local _vs_smart_add_log
				_vs_smart_add_log=(
				--output-format':output Format: normal|json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm vs-smart-add-log options" _vs_smart_add_log
				;;
			(vs-internal-log)
				local _vs_internal_log
				_vs_internal_log=(
				--type':Log type: ALL, CIT, HIT, NLOG, ASSERT, EVENT, EXTENDED. Defaults to ALL.'
				-t':alias for --type'
				--dir-name':Output directory; defaults to current working directory.'
				-d':alias for --dir-name'
				--verbose':To print out verbose info.'
				-v':alias for --verbose'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm vs-internal-log" _vs_internal_log
				;;
			(garbage-collect-log)
				local _garbage_collect_log
				_garbage_collect_log=(
				--output-format':Output format: normal|json|binary'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm garbage-collect-log" _garbage_collect_log
				;;
			(market-log)
				local _market_log
				_market_log=(
				--raw-binary':dump output in binary format'
				-b':alias for --raw-binary'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm market-log" _market_log
				;;
			(latency-tracking-log)
				local _latency_tracking_log
				_latency_tracking_log=(
				--enable':Enable Latency Tracking'
				-e':alias for --enable'
				--disable':Disable Latency Tracking'
				-d':alias for --disable'
				--read':Get read statistics'
				-r':alias for --read'
				--write':Get write statistics'
				-w':alias for --write'
				--type':Log type to get'
				-t':alias for --type'
				--output-format':Output format: normal|json|binary'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm latency-tracking-log" _latency_tracking_log
				;;
			(parse-telemetry-log)
				local _parse_telemetry_log
				_parse_telemetry_log=(
				--host-generate':Controls when to generate new
				 host initiated report. Default
				 value '1' generates new host
				 initiated report, value '0'
				 causes retrieval of existing
				 log.'
				-g':alias for --host-generate'
				--controller-init':Gather report generated by the controller.'
				-c':alias for --controller-init'
				--data-area':Pick which telemetry data area to
				report. Default is 3 to fetch
				areas 1-3. Valid options are 1,
				2, 3, 4.'
				-d':alias for --data-area'
				--config-file':JSON configuration file'
				-j':alias for --config-file'
				--source-file':binary file containing log dump to parse'
				-s':alias for --source-file'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm parse-telemetry-log" _parse_telemetry_log
				;;
			(clear-pcie-correctable-errors)
				local _clear_pcie_correctable_errors
				_clear_pcie_correctable_errors=(
				--no-uuid':Skip UUID index search (UUID index not required for OCP 1.0)'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm clear-pcie-correctable-errors" _clear_pcie_correctable_errors
				;;
			(clear-fw-activate-history)
				local _clear_fw_activate_history
				_clear_fw_activate_history=(
				--no-uuid':Skip UUID index search (UUID index not required for OCP 1.0)'
				-n':alias for --no-uuid'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm clear-fw-activate-history" _clear_fw_activate_history
				;;
			(vs-fw-activate-history)
				local _vs_fw_activate_history
				_vs_fw_activate_history=(
				--output-format':output format : normal | json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm vs-fw-activate-history" _vs_fw_activate_history
				;;
			(log-page-directory)
				local _log_page_directory
				_log_page_directory=(
				--output-format':output format : normal | json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm log-page-directory" _log_page_directory
				;;
			(temp-stats)
				local _temp_stats
				_temp_stats=(
				--raw-binary':dump output in binary format'
				-b':alias for --raw-binary'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm temp-stats" _temp_stats
				;;
			(vs-drive-info)
				local _vs_drive_info
				_vs_drive_info=(
				--output-format':output format : normal | json'
				-o':alias for --output-format'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm vs-drive-info" _vs_drive_info
				;;
			(workload-tracker)
				local _workload_tracker
				_workload_tracker=(
				'--uuid-index=:specify uuid index'
				'-U:alias for --uuid-index'
				--enable':Enable Workload Tracker'
				-e':alias for --enable'
				--disable':Disable Workload Tracker'
				-d':alias for --disable'
				--sample-time=':Sample time in seconds'
				-s':alias for --sample-time'
				--type=':Workload Tracker type'
				-t':alias for --type'
				--run-time=':Run time in seconds'
				-r':alias for --run-time'
				--flush-freq=':Flush frequency in seconds'
				-f':alias for --flush-freq'
				--wall-clock':Use wall clock time'
				-w':alias for --wall-clock'
				--trigger-field=':Trigger field'
				-T':alias for --trigger-field'
				--trigger-threshold=':Trigger threshold'
				-V':alias for --trigger-threshold'
				--trigger-on-delta':Trigger on delta'
				-D':alias for --trigger-on-delta'
				--trigger-on-latency':Trigger on latency'
				-L':alias for --trigger-on-latency'
				--verbose':Increase output verbosity'
				-v':alias for --verbose'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme solidigm workload-tracker options" _workload_tracker
				;;
			(*)
				_files
				;;
			esac
			;;
		(fdp)
			case ${words[2]} in
			(feature)
				local _feature
				_feature=(
				--endgrp-id=':Endurance group ID'
				-e':alias for --endgrp-id'
				--enable-conf-idx=':FDP configuration index to enable'
				-c':alias for --enable-conf-idx'
				--disable=':Disable current FDP configuration'
				-d':alias for --disable'
				--verbose=':Increase output verbosity'
				-v':alias for --verbose'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme fdp feature options" _feature
				;;
			(*)
				_files
				;;
			esac
			;;
		(dapustor)
			case ${words[2]} in
			(smart-log-add)
				local _smart_log_add
				_smart_log_add=(
				--namespace-id':(optional) desired namespace'
				-n':alias for --namespace-id'
				--output-format':Output format: normal|json|binary'
				-o':alias for --output-format'
				--raw-binary':dump log in binary format'
				-b':alias of --raw-binary'
				)
				_arguments '*:: :->subcmds'
				_describe -t commands "nvme dapustor smart-log-add options" _smart_log_add
				;;
			(*)
				_files
				;;
			esac
			;;
		(sanitize)
			case ${words[CURRENT-1]} in
			(--sanact=|-a)
				_values '' 'exit-failure' 'start-block-erase' 'start-overwrite' 'start-crypto-erase'
				;;
			(*)
				_files
				;;
			esac
			;;
                (mangoboost)
                        case ${words[2]} in
                        (id-ctrl)
                                local _id_ctrl
                                _id_ctrl=(
                                --verbose':Increase output verbosity'
                                -v':alias for --verbose'
                                --output-format':Output format: normal|json|binary'
                                -o':alias for --output-format'
                                --vendor-specific':dump binary vendor field'
                                -V':alias for --vendor-specific'
                                --raw-binary':show identify in binary format'
                                -b':alias for --raw-binary'
                                --human-readable':show identify in readable format'
                                -H':alias for --human-readable'
                                )
                                _arguments '*:: :->subcmds'
                                _describe -t commands "nvme mangoboost id-ctrl options" _id_ctrl
                                ;;
                        (*)
                                _files
                                ;;
			esac
			;;
		(fw-commit)
			case ${words[CURRENT-1]} in
			(--action=|-a)
				_values '' 'replace' 'replace-and-activate' 'set-active' 'replace-and-activate-immediate' 'replace-boot-partition' 'activate-boot-partition'
				;;
			(*)
				_files
				;;
			esac
			;;
		(*)
			_files
			;;
		esac
		return
	else
		case ${words[CURRENT-1]} in
		(list)
			local _list
			_list=(
			--output-format=':Output format: normal|json'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list options" _list
			;;
		(list-subsys)
			local _listsubsys
			_listsubsys=(
			--output-format=':Output format: normal|json'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-subsys options" _listsubsys
			;;
		(id-ctrl)
			local _idctrl
			_idctrl=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--vendor-specific':also dump binary vendor infos'
			-V':alias of --vendor-specific'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ctrl options" _idctrl
			;;
		(id-ns)
			local _idns
			_idns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--vendor-specific':also dump binary vendor infos'
			-V':alias of --vendor-specific'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ns options" _idns
			;;
		(id-ns-granularity)
			local _idns_granularity
			_idns_granularity=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ns-granularity options" _idns_granularity
			;;
		(id-ns-lba-format)
			local _idns_lba_format
			_idns_lba_format=(
			/dev/nvme':supply a device to use (required)'
			--lba-format-index=':show infos for lba format index <lba-format-index>'
			-i':alias of --lba-format-index'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-ns-lba-format options" _idns_lba_format
			;;
		(list-ns)
			local _listns
			_listns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':start namespace infos listing with this nsid'
			-n':alias of --namespace-id'
			--csi=':command set identifier'
			-y':alias of --csi'
			--all':show all namespaces in the subsystem, whether attached or inactive'
			-a':alias of --all'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-ns options" _listns
			;;
		(cmdset-ind-id-ns)
			local _cmdset_ind_idns
			_cmdset_ind_idns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme cmdset-ind-id-ns options" _cmdset_ind_idns
			;;
		(id-iocs)
			local _idiocs
			_idiocs=(
			/dev/nvme':supply a device to use (required)'
			--controller-id=':show infos for controller <cntid>'
			-c':alias of --controller-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-iocs options" _idiocs
			;;
		(id-domain)
			local _iddomain
			_iddomain=(
			/dev/nvme':supply a device to use (required)'
			--dom-id=':show infos for domain id <cntid>'
			-d':alias of --dom-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-domain options" _iddomain
			;;
		(nvm-id-ctrl)
			local _nvmidctrl
			_nvmidctrl=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvm-id-ctrl options" _nvmidctrl
			;;
		(nvm-id-ns)
			local _nvmidns
			_nvmidns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvm-id-ns options" _nvmidns
			;;
		(nvm-id-ns-lba-format)
			local _nvm_idns_lba_format
			_nvm_idns_lba_format=(
			/dev/nvme':supply a device to use (required)'
			--lba-format-index=':show infos for lba format index <lba-format-index>'
			-i':alias of --lba-format-index'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvm-id-ns-lba-format options" _nvm_idns_lba_format
			;;
		(primary-ctrl-caps)
			local _primary_ctrl_caps
			_primary_ctrl_caps=(
			/dev/nvme':supply a device to use (required)'
			--cntlid=':show infos for controller <cntid>'
			-c':alias of --cntlid'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme primary-ctrl-caps options" _primary_ctrl_caps
			;;
		(list-secondary)
			local _listsecondary
			_listsecondary=(
			/dev/nvme':supply a device to use (required)'
			--cntid=':show infos for lowest controller <cntid>'
			-c':alias of --cntid'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--num-entries=':number of entries to retrieve'
			-e':alias of --num-entries'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-secondary options" _listsecondary
			;;
		(ns-descs)
			local _ns_descs
			_ns_descs=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme ns-descs options" _ns_descs
			;;
		(id-nvmset)
			local _id_nvmset
			_id_nvmset=(
			/dev/nvme':supply a device to use (required)'
			--nvmset_id=':NVM Set Identify value'
			-i':alias of --nvmset_id'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-nvmset options" _id_nvmset
			;;
		(id-uuid)
			local _id_uuid
			_id_uuid=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme id-uuid options" _id_uuid
			;;
		(list-endgrp)
			local _listendgrp
			_listendgrp=(
			/dev/nvme':supply a device to use (required)'
			--endgrp-id=':endurance group id'
			-i':alias of --endgrp-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-endgrp options" _listendgrp
			;;
		(create-ns)
			local _createns
			_createns=(
			/dev/nvme':supply a device to use (required)'
			--nsze=':namespace size to create'
			-s':alias of --nsze'
			--ncap=':namespace capacity'
			-c':alias of --ncap'
			--flbas=':FLBA size'
			-f':alias of --flbas'
			--dps=':data protection?'
			-d':alias of --dps'
			--nmic=':multipath and sharing'
			-m':alias of --nmic'
			--anagrp-id=':ANA Group Identifier'
			-a':alias of --anagrp-id'
			--nvmset-id=':NVM Set Identifier'
			-i':alias of --nvmset-id'
			--endg-id=':Endurance Group Identifier'
			-e':alias of --endg-id'
			--block-size=':target block size'
			-b':alias of --block-size'
			--timeout=':value for timeout'
			--csi=':command set identifier'
			-y':alias of --csi'
			--lbstm=':logical block storage tag mask'
			-l':alias of --lbstm'
			--nsze-si=':size of ns (NSZE) in standard SI units'
			-S':alias of --nsze-si'
			--ncap-si=':capacity of ns (NCAP) in standard SI units'
			-C':alias of --ncap-si'
			--azr=':Allocate ZRWA Resources (AZR) for Zoned Namespace Command Set'
			-z':alias of --azr'
			--rar=':Requested Active Resources (RAR) for Zoned Namespace Command Set'
			-r':alias of --rar'
			--ror=':Requested Open Resources (ROR) for Zoned Namespace Command Set'
			-O':alias of --ror'
			--rnumzrwa=':Requested Number of ZRWA Resources (RNUMZRWA) for Zoned Namespace Command Set'
			-u':alias of --rnumzrwa'
			--phndls=':Comma separated list of Placement Handle Associated RUH'
			-p':alias of --phndls'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme create-ns options" _createns
			;;
		(delete-ns)
			local _deletens
			_deletens=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to delete'
			-n':alias of --namespace-id'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme delete-ns options" _deletens
			;;
		(attach-ns)
			local _attachns
			_attachns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to attach to the controller'
			-n':alias of --namespace-id'
			--controllers=':if a device is not provided, supply a comma-sep list of controllers'
			-c':alias of --controllers'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme attach-ns options" _attachns
			;;
		(detach-ns)
			local _detachns
			_detachns=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':namespace to detach from controller'
			-n':alias of --namespace-id'
			--controllers=':if a device is not provided, supply a comma-sep list of controllers'
			-c':alias of --controllers'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme detach-ns options" _detachns
			;;
		(list-ctrl)
			local _listctrl
			_listctrl=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show controllers attached to this namespace'
			-n':alias of --namespace-id'
			--cntid=':start the list with this controller'
			-c':alias of --cntid'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme list-ctrl options" _listctrl
			;;
		(get-ns-id)
			local _getnsid
			_getnsid=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-ns-id options" _getnsid
			;;
		(get-log)
			local _getlog
			_getlog=(
			/dev/nvme':supply a device to use (required)'
			--log-id=':requested log number'
			-i':alias of --log-id'
			--log-len=':number of bytes to show for requested log'
			-l':alias of --log-len'
			--namespace-id=':get log specific to <nsid> if namespace logs are supported'
			-n':alias of --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--aen=':result of the aen, use to override log id'
			-a':alias of --aen'
			--lpo=':log page offset specifies the location within a log page from where to start returning data'
			-L':alias of --lpo'
			--lsi=':log specific identifier specifies an identifier that is required for a particular log page'
			-S':alias of --lsi'
			--rae':Retain an Asynchronous Event'
			-r':alias of --rae'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--csi=':command set identifier'
			-y':alias of --csi'
			--ot':offset type'
			-O':alias of --ot'
			--xfer-len=':read chunk size (default 4k)'
			-x':alias of --xfer-len'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-log options" _getlog
			;;
		(persistent-event-log)
			local _persistenteventlog
			_persistenteventlog=(
			/dev/nvme':supply a device to use (required)'
			--action=':action the controller shall take for this log page'
			-a':alias to --action'
			--log-len=':number of bytes to show for requested log'
			-l':alias of --log-len'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme persistent-event-log options" _persistenteventlog
			;;
		(telemetry-log)
			local _telemetry_log
			_telemetry_log=(
			/dev/nvme':supply a device to use (required)'
			--output-file=':telemetry data output write'
			-O':alias for --output-file'
			--host-generate=':Have the host tell the controller to generate the report'
			-g':alias to --host-generate'
			--controller-init':Gather report generated by the controller'
			-c':alias of --controller-init'
			--data-area':Pick which telemetry data area to report'
			-d':alias of --data-area'
			--data-area':Pick which telemetry data area to report'
			-d':alias of --data-area'
			--rae':Retain an Asynchronous Event'
			-r':alias to --rae'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme telemetry-log options" _telemetry_log
			;;
		(pred-lat-event-agg-log)
			local _predlateventagglog
			_predlateventagglog=(
			/dev/nvme':supply a device to use (required)'
			--log-entries=':Number of pending NVM Set Entries log list'
			-e':alias to --log-entries'
			--rae':Retain an Asynchronous Event'
			-r':alias to --rae'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme pred-lat-event-agg-log options" _predlateventagglog
			;;
		(predictable-lat-log)
			local _predictablelatlog
			_predictablelatlog=(
			/dev/nvme':supply a device to use (required)'
			--nvmset-id=':NVM Set Identifier on which log page retrieve info'
			-i':alias to --nvmset-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme predictable-lat-log options" _predictablelatlog
			;;
		(fw-log)
			local _fwlog
			_fwlog=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-log options" _fwlog
			;;
		(changed-ns-list-log)
			local _changed_ns_list_log
			_changed_ns_list_log=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme changed-ns-list-log options" _changed_ns_list_log
			;;
		(smart-log)
			local _smartlog
			_smartlog=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get SMART log specific to <nsid> if namespace logs are supported'
			-n':alias to --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			--verbose':show infos verbosely'
			-v':alias to --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme smart-log options" _smartlog
			;;
		(smart-log-add)
			local _add
			_add=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get additional SMART log specific to <nsid> if namespace logs supported'
			-n':alias to --namespace-id'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme smart-log-add options" _add
			;;
		(ana-log)
			local _ana_log
			_ana_log=(
			/dev/nvme':supply a device to use (required)'
			--groups':Return ANA groups only'
			-g':alias to --groups'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme ana-log options" _ana_log
			;;
		(error-log)
			local _errlog
			_errlog=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			--log-entries=':request n >= 1 log entries'
			-e':alias to --log-entries'
			--valid-entry':output valid entry only'
			-V':alias to --valid-entry'
			--sqid=':output specified SQID entry only'
			-S':alias to --sqid'
			--status=':output specified STATUS entry only'
			-s':alias to --status'
			--lba=':output specified LBA entry only'
			-l':alias to --lba'
			--namespace-id=':output specified NSID entry only'
			-n':alias to --namespace-id'
			--trtype=':output specified TRTYPE entry only'
			-t':alias to --trtype'
			--csi=':output specified CSI entry only'
			-c':alias to --csi'
			--opcode=':output specified OPC entry only'
			-O':alias to --opcode'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme error-log options" _errlog
			;;
		(effects-log)
			local _effects_log
			_effects_log=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			--csi=':command set identifier'
			-c':alias of --csi'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme effects-log options" _effects_log
			;;
		(endurance-log)
			local _endurance_log
			_endurance_log=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--group-id=':The endurance group identifier'
			-g':alias of --group-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme endurance-log options" _endurance_log
			;;
		(endurance-event-agg-log)
			local _enduranceeventagglog
			_enduranceeventagglog=(
			/dev/nvme':supply a device to use (required)'
			--log-entries=':Number of Endurance Group Event Agg Entries log list'
			-e':alias to --log-entries'
			--rae':Retain an Asynchronous Event'
			-r':alias to --rae'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme endurance-event-agg-log options" _enduranceeventagglog
			;;
		(lba-status-log)
			local _lbastatuslog
			_lbastatuslog=(
			/dev/nvme':supply a device to use (required)'
			--rae':Retain an Asynchronous Event'
			-r':alias to --rae'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme lba-status-log options" _lbastatuslog
			;;
		(resv-notif-log)
			local _resvnotiflog
			_resvnotiflog=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-notif-log options" _resvnotiflog
			;;
		(boot-part-log)
			local _bootpartlog
			_bootpartlog=(
			/dev/nvme':supply a device to use (required)'
			--lsp=':log specific field'
			-s':alias to --lsp'
			--output-file=':boot partition data output write'
			-f':alias for --output-file'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme boot-part-log options" _bootpartlog
			;;
		(power-measurement-log)
			local _powermeaslog
			_powermeaslog=(
			/dev/nvme':supply a device to use (required)'
			--raw-binary':output in binary format'
			-b':alias for --raw-binary'
			--output-format=':output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':increase output verbosity'
			-v':alias for --verbose'
			--timeout=':timeout value, in milliseconds'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme power-measurement-log options" _powermeaslog
			;;
		(get-feature)
			local _getf
			_getf=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':get feature specific to <nsid>'
			-n':alias to --namespace-id'
			--feature-id=':hexadecimal name of feature to examine (required)'
			-f':alias to --feature-id'
			--sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported'
			-s':alias to --sel'
			--data-len=':buffer len for returned LBA Type Range or host identifier data'
			-l':alias for --data-len'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--cdw11=':dword 11 value, used for interrupt vector configuration only'
			--raw-binary':dump infos in binary format'
			-b':alias to --raw-binary'
			--timeout=':value for timeout'
			--changed':show feature changed'
			-C':alias of --changed'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-feature options" _getf
			;;
		(device-self-test)
			local _device_self_test
			_device_self_test=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':Indicate the namespace in which the device self-test has to be carried out'
			-n':alias to --namespace-id'
			--self-test-code=':This field specifies the action taken by the device self-test command'
			-s':alias for --self-test-code'
			--wait':Wait for the test to finish'
			-w':alias to --wait'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme device-self-test options" _device_self_test
			;;
		(self-test-log)
			local _self_test_log
			_self_test_log=(
			/dev/nvme':supply a device to use (required)'
			--dst-entries=':Indicate how many DST log entries to be retrieved'
			-e':alias to --dst-entries'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme self-test-log options" _self_test_log
			;;
		(lockdown)
			local _lockdown
			_lockdown=(
			/dev/nvme':supply a device to use (required)'
			--ofi=':Opcode or Feature Identifier(OFI) (required)'
			-O':alias of --ofi'
			--ifc=':Interface (INF) field Information (required)'
			-f':alias of --ifc'
			--prhbt=':Prohibit(PRHBT) bit field (required)'
			-p':alias of --prhbt'
			--scp=':Scope(SCP) field for identifying opcode or feature id (required)'
			-s':alias of --scp'
			--uuid=':UUID Index field required aligned with Scope'
			-U':alias of --uuid'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme lockdown options" _lockdown
			;;
		(set-feature)
			local _setf
			_setf=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':feature is specific to <nsid>'
			-n':alias to --namespace-id'
			--feature-id=':hexadecimal name of feature to set (required)'
			-f':alias to --feature-id'
			--data-len=':buffer length, only used for LBA Type Range or host identifier data'
			-l':alias for --data-len'
			--data=':data file for LBA Type Range or host identifier buffer (defaults to stdin)'
			-d':alias to --data'
			--value=':new value of feature (required)'
			-V'alias to --value'
			--uuid-index=':uuid index'
			-U':alias for --uuid-index'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme set-feature options" _setf
			;;
		(set-property)
			local _set_property
			_set_property=(
			/dev/nvme':supply a device to use (required)'
			--offset=':the offset of the property'
			-O':alias to --offset'
			--value=':the value of the property to be set'
			-V':alias to --value'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme set-property options" _set_property
			;;
		(get-property)
			local _get_property
			_get_property=(
			/dev/nvme':supply a device to use (required)'
			--offset=':the offset of the property'
			-O':alias to --offset'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-property options" _get_property
			;;
		(format)
			local _format
			_format=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':<nsid> of namespace to format (required)'
			-n':alias of --namespace-id'
			--timeout=':value for timeout'
			--lbaf=':LBA format to apply to namespace (required)'
			-l':alias of --lbaf'
			--ses=':secure erase? 0 - no-op (default), 1 - user-data erase, 2 - cryptographic erase'
			-s':alias of --ses'
			--pil=':location of protection information? 0 - end, 1 - start'
			-p':alias of --pil'
			--pi=':protection information? 0 - off, 1 - Type 1 on, 2 - Type 2 on, 3 - Type 3 on'
			-i':alias of --pi'
			--ms=':extended format? 0 - off (metadata in separate buffer), 1 - on (extended LBA used)'
			-m':alias of --ms'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme format options" _format
			;;
		(fw-commit)
			local _fw_commit
			_fw_commit=(
			/dev/nvme':supply a device to use (required)'
			--action=':activation action (required)? 0 - replace fw without activating, 1 - replace with activation, 2 - replace with activation at next reset'
			-a':alias of --action'
			--slot=':firmware slot to activate'
			-s':alias of --slot'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-commit options" _fw_commit
			;;
		(fw-download)
			local _fwd
			_fwd=(
			/dev/nvme':supply a device to use (required)'
			--fw=':firmware file to download (required)'
			-f':alias of --fw'
			--xfer=':limit on chunk-size of transfer (if device has download size limit)'
			-x':alias of --xfer'
			--offset=':starting offset, in dwords (defaults to 0, only useful if download is split across multiple files)'
			-O':alias of --offset'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fw-download options" _fwd
			;;
		(capacity-mgmt)
			local _capacity_mgmt
			_capacity_mgmt=(
			/dev/nvme':supply a device to use (required)'
			--operation=':Operation to be performed by the controller'
			-O':alias of --operation'
			--element-id=':specific to the value of the Operation field'
			-i':alias of --element-id'
			--cap-lower=':Least significant 32 bits of the capacity in bytes'
			-l':alias of --cap-lower'
			--cap-upper=':Most significant 32 bits of the capacity in bytes'
			-u':alias of --cap-upper'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme capacity-mgmt options" _capacity_mgmt
			;;
		(write-zeroes)
			local _write_zeroes
			_write_zeroes=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--start-block=':64-bit address of the first logical block to be written'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to write'
			-c':alias of --block-count'
			--dir-type=':directive type'
			-T':alias of --dir-type'
			--deac':Set DEAC bit, requesting controller to deallocate specified logical blocks'
			-d':alias of --deac'
			--limited-retry':if included, controller should try less hard to send data to media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':data shall be written to nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--storage-tag=':storage tag for end-to-end PI'
			-S':alias of --storage-tag'
			--storage-tag-check':Storage Tag field shall be checked as part of end-to-end data protection processing'
			-C':alias of --storage-tag-check'
			--dir-spec=':directive specific'
			-D':alias of --dir-spec'
			--namespace-zeroes':If set, then the controller clear all logical blocks to zero in the entire namespace'
			-Z':alias of --namespace-zeroes'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme write-zeroes options" _write_zeroes
			;;
		(write-uncor)
			local _write_uncor
			_write_uncor=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--start-block=':64-bit address of the first logical block to be written'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to write'
			-c':alias of --block-count'
			--dir-type=':directive type'
			-T':alias of --dir-type'
			--dir-spec':directive specific'
			-S':alias of --dir-spec'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme write-uncor options" _write_uncor
			;;
		(verify)
			local _verify
			_verify=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--start-block=':64-bit address of the first logical block to be verified'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to verify'
			-c':alias of --block-count'
			--limited-retry':if included, controller should try less hard to send data to media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':data shall be verified from nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--storage-tag=':storage tag for end-to-end PI'
			-S':alias of --storage-tag'
			--storage-tag-check':Storage Tag field shall be checked as part of end-to-end data protection processing'
			-C':alias of --storage-tag-check'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme verify options" _verify
			;;
		(sanitize)
			local _sanitize
			_sanitize=(
			/dev/nvme':supply a device to use (required)'
			--no-dealloc':No deallocate after sanitize'
			-d':alias of --no-dealloc'
			--oipbp':Overwrite invert pattern between passes'
			-i':alias of --oipbp'
			--owpass=':Overwrite pass count'
			-n':alias of --owpass'
			--ause':Allow unrestricted sanitize exit'
			-u':alias of --ause'
			--sanact=':Sanitize action: 1 = Exit failure mode, 2 = Start block erase, 3 = Start overwrite, 4 = Start crypto erase, 5 = Exit media verification'
			-a':alias of --sanact'
			--ovrpat=':Overwrite pattern'
			-p':alias of --ovrpat'
			--emvs=':Enter media verification state'
			-e':alias of --emvs'
			--wait':Wait for the sanitize to finish'
			-w':alias of --wait'
			--repeat=':Repeat for the multi cycle sanitization'
			-r':alias of --repeat'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme sanitize options" _sanitize
			;;
		(sanitize-log)
			local _sanitize_log
			_sanitize_log=(
			/dev/nvme':supply a device to use (required)'
			--rae':Retain an Asynchronous Event'
			-r':alias of --rae'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme sanitize-log options" _sanitize_log
			;;
		(reset)
			local _reset
			_reset=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme reset options" _reset
			;;
		(subsystem-reset)
			local _subsystem_reset
			_subsystem_reset=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme subsystem-reset options" _subsystem_reset
			;;
		(ns-rescan)
			local _ns_rescan
			_ns_rescan=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme ns-rescan options" _ns_rescan
			;;
		(supported-log-pages)
			local _support
			_support=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme supported-log-pages options" _support
			;;
		(media-unit-stat-log)
			local _medialog
			_medialog=(
			/dev/nvme':supply a device to use (required)'
			--dom-id=':show infos for domain id'
			-d':alias of --dom-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme media-unit-stat-log" _medialog
			;;
		(supported-cap-config-log)
			local _caplog
			_caplog=(
			/dev/nvme':supply a device to use (required)'
			--dom-id=':show infos for domain id'
			-d':alias of --dom-id'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme supported-cap-config-log" _caplog
			;;
		(admin-passthru)
			local _admin
			_admin=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':hexadecimal opcode to send (required)'
			-O':alias of --opcode'
			--flags=':command flags'
			-f':alias of --flags'
			--rsvd=':value for reserved field'
			-R':alias of --rsvd'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--metadata-len=':length for metadata buffer'
			-m':alias of --metadata-len'
			--timeout=':value for timeout'
			--cdw2=':value for command dword 2'
			-2':alias for --cdw2'
			--cdw3=':value for command dword 3'
			-3':alias for --cdw3'
			--cdw10=':value for command dword 10'
			-4':alias for --cdw10'
			--cdw11=':value for command dword 11'
			-5':alias for --cdw11'
			--cdw12=':value for command dword 12'
			-6':alias for --cdw12'
			--cdw13=':value for command dword 13'
			-7':alias for --cdw13'
			--cdw14=':value for command dword 14'
			-8':alias for command dword 14'
			--cdw15=':value for command dword 15'
			-9':alias for command dword 15'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--show-command':simply print command instead of sending it to <device>'
			-s':alias for --show-command'
			--dry-run':alias for --show-command'
			-d':alias for --show-command'
			--read':set dataflow direction to receive'
			-r':alias for --read'
			--write':set dataflow direction to send'
			-w':alias for --write'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme admin-passthru options" _admin
			;;
		(io-passthru)
			local _io
			_io=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':hexadecimal opcode to send (required)'
			-O':alias of --opcode'
			--flags=':command flags'
			-f':alias of --flags'
			--rsvd=':value for reserved field'
			-R':alias of --rsvd'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--metadata-len=':length for metadata buffer'
			-m':alias of --metadata-len'
			--timeout=':value for timeout'
			--cdw2=':value for command dword 2'
			-2':alias for --cdw2'
			--cdw3=':value for command dword 3'
			-3':alias for --cdw3'
			--cdw10=':value for command dword 10'
			-4':alias for --cdw10'
			--cdw11=':value for command dword 11'
			-5':alias for --cdw11'
			--cdw12=':value for command dword 12'
			-6':alias for --cdw12'
			--cdw13=':value for command dword 13'
			-7':alias for --cdw13'
			--cdw14=':value for command dword 14'
			-8':alias for command dword 14'
			--cdw15=':value for command dword 15'
			-9':alias for command dword 15'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--show-command':simply print command instead of sending it to <device>'
			-s':alias for --show-command'
			--dry-run':alias for --show-command'
			-d':alias for --show-command'
			--read':set dataflow direction to receive'
			-r':alias for --read'
			--write':set dataflow direction to send'
			-w':alias for --write'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme io-passthru options" _io
			;;
		(security-send)
			local _ssend
			_ssend=(
			/dev/nvme':supply a device to use (required)'
			--file=':payload'
			-f':alias for --file'
			--secp=':security protocol as defined in SPC-4'
			-p':alias for --secp'
			--spsp=':send security-protocol-specific data as defined in SPC-4'
			-s':alias for --spsp'
			--tl=':transfer length as defined in SPC-4'
			-t':alias for --tl'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme security-send options" _ssend
			;;
		(security-recv)
			local _srecv
			_srecv=(
			/dev/nvme':supply a device to use (required)'
			--secp=':security protocol as defined in SPC-4'
			-p':alias for --secp'
			--spsp=':send security-protocol-specific data as defined in SPC-4'
			-s':alias for --spsp'
			--size=':size of buffer (prints to stdout on successful recv)'
			-x':alias for --size'
			--al=':allocation length as defined in SPC-4'
			-a':alias for --al'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme security-recv options" _srecv
			;;
		(get-lba-status)
			local _get_lba_status
			_get_lba_status=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--start-lba=':Starting LBA(SLBA) in 64-bit address of the first logical block'
			-s':alias for --start-lba'
			--max-dw=':Maximum Number of Dwords(MNDW) specifies maximum number of dwords to return'
			-m':alias for --max-dw'
			--action=':Action Type(ATYPE) specifies the mechanism'
			-a':alias for --action'
			--range-len=':Range Length(RL) specifies the length of the range of contiguous LBAs beginning at SLBA'
			-l':alias for --range-len'
			--timeout':value for timeout'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-lba-status options" _get_lba_status
			;;
		(resv-acquire)
			local _acq
			_acq=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':<nsid> of namespace to try to reserve (required)'
			-n':alias for --namespace-id'
			--prkey=':pre-empt reservation key'
			-p':alias for --prkey'
			--rtype=':hexadecimal reservation type'
			-t':alias for --rtype'
			--racqa=':reservation acquire action'
			-a':alias for --racqa'
			--iekey=':ignore existing reservation key'
			-i':alias for --iekey'
			--crkey':current reservation key'
			-c':alias for --crkey'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-acquire options" _acq
			;;
		(resv-release)
			local _rel
			_rel=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--rtype=':hexadecimal reservation type'
			-t':alias of --rtype'
			--rrela=':reservation release action'
			-a':alias of --rrela'
			--iekey':ignore existing reservation key'
			-i':alias of --iekey'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-release options" _rel
			;;
		(resv-report)
			local _rep
			_rep=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--numd=':number of dwords of reservation status to xfer'
			-d':alias of --numd'
			--eds':request extended data structure'
			-e':alias of --eds'
			--raw-binary':dump output in binary format'
			-b':alias of --raw-binary'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-report options" _rep
			;;
		(resv-register)
			local _reg
			_reg=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			--crkey=':current reservation key'
			-c'alias of --crkey'
			--nrkey=':new reservation key'
			-k':alias of --nrkey'
			--cptpl=':change persistence through power loss setting'
			-p':alias for --cptpl'
			--rrega=':reservation registration action to perform'
			-r':alias for --rrega'
			--iekey':ignore existing reservation key'
			-i':alias for --iekey'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme resv-register options" _reg
			;;
		(dsm)
			local _dsm
			_dsm=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--ctx-attrs=':Comma separated list of the context attributes in each range'
			-a':alias of --ctx-attrs'
			--blocks':Comma separated list of the number of blocks in each range'
			-b':alias of --blocks'
			--slbs':Comma separated list of the starting block in each range'
			-s':alias of --slbs'
			--ad':Attribute Deallocate'
			-d':alias of --ad'
			--idw':Attribute Integral Dataset for Write'
			-w':alias of --idw'
			--idr':Attribute Integral Dataset for Read'
			-r':alias of --idr'
			--cdw11=':value for command dword 11'
			-c':alias for --cdw11'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dsm options" _dsm
			;;
		(copy)
			local _copy
			_copy=(
			/dev/nvme':supply a device to use (required)'
			--sdlba=':64-bit addr of first destination logical block'
			-d':alias of --sdlba'
			--slbs=':64-bit addr of first block per range (comma-separated list)'
			-s':alias of --slbs'
			--blocks=':number of blocks per range (comma-separated list, zeroes-based values)'
			-b':alias of --blocks'
			--limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':if included, the data shall be read from non-volatile media'
			-f':alias of --force-unit access'
			--prinfow=':protection information and check field (write part)'
			-p':alias of --prinfow'
			--prinfor=':protection information and check field (read part)'
			-P':alias of --prinfor'
			--ref-tag=':initial lba reference tag (write part)'
			-r':alias of --ref-tag'
			--expected-ref-tags=':expected lba reference tags (read part, comma-separated list)'
			-R':alias of --expected-ref-tags'
			--app-tag=':lba application tag (write part)'
			-a':alias of --app-tag'
			--expected-app-tags=':expected lba application tags (read part, comma-separated list)'
			-A':alias of --expected-app-tags'
			--app-tag-mask=':lba application tag mask (write part)'
			-m':alias of --app-tag-mask'
			--expected-app-tag-masks=':expected lba application tag masks (read part, comma-separated list)'
			-M':alias of --expected-app-tag-masks'
			--dir-type=':directive type (write part)'
			-T':alias of --dir-type'
			--dir-spec=':directive specific (write part)'
			-S':alias of --dir-spec'
			--format=':source range entry format'
			-F':alias of --format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme copy options" _copy
			;;
		(flush)
			local _flush
			_flush=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':nsid'
			-n':alias of --namespace-id'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme flush options" _flush
			;;
		(compare)
			local _comp
			_comp=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':begin compare at this 64-bit LBA on device'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to compare to local data'
			-c':alias of --block-count'
			--block-size=':if specified, logical block size in bytes (if not included, the logical block size is found through identify namespace)'
			-b':alias of --block-size'
			--metadata-size=':number of bytes of metadata to compare'
			-y':alias of --metadata-size'
			--data-size=':size of local data buffer in bytes'
			-z':alias of --data-size'
			--data=':local data file to compare to blocks on device'
			-d':alias of --data'
			--prinfo=':protection information action and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)'
			-l':alias of --limited-retry'
			--force-unit-access':if included, the data shall be read from non-volatile media'
			-f':alias of --force-unit access'
			--show-command':show command instead of sending to device'
			-V':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			--latency':latency statistics will be output following compare'
			-t':alias of --latency'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme compare options" _comp
			;;
		(read)
			local _read
			_read=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':64-bit address of the first logical block to be read'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to read'
			-c':alias of --block-count'
			--block-size=':if specified, logical block size in bytes (if not included, the logical block size is found through identify namespace)'
			-b':alias of --block-size'
			--data-size=':size of data to be read'
			-z':alias of --data-size'
			--metadata-size=':size of metadata to be read'
			-y':alias of --metadata-size'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--data=':file into which data should be read (defaults to stdout)'
			-d':alias of --data'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--latency':latency statistics will be output following read'
			-t':alias of --latency'
			--force-unit-access':data read shall be returned from nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--show-command':show command instead of sending to device'
			-V':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme read options" _read
			;;
		(write)
			local _wr
			_wr=(
			/dev/nvme':supply a device to use (required)'
			--start-block=':64-bit address of the first logical block to be written'
			-s':alias of --start-block'
			--block-count=':number of logical blocks on device to write'
			-c':alias of --block-count'
			--block-size=':if specified, logical block size in bytes (if not included, the logical block size is found through identify namespace)'
			-b':alias of --block-size'
			--data-size=':size of data to be written'
			-z':alias of --data-size'
			--metadata-size=':size of metadata to be written'
			-y':alias of --metadata-size'
			--ref-tag=':reference tag (for end to end PI)'
			-r':alias of --ref-tag'
			--data=':file from which data should be written to device (defaults to stdin)'
			-d':alias of --data'
			--prinfo=':protection information and check field'
			-p':alias of --prinfo'
			--app-tag-mask=':application tag mask (for end to end PI)'
			-m':alias of --app-tag-mask'
			--app-tag=':application tag (for end to end PI)'
			-a':alias of --app-tag'
			--limited-retry':if included, controller should try less hard to send data to media (if not included, all available data-recovery means used)'
			-l':alias of --limited-retry'
			--latency':latency statistics will be output following write'
			-t':alias of --latency'
			--force-unit-access':data shall be written to nonvolatile media before command completion is indicated'
			-f':alias of --force-unit-access'
			--show-command':show command instead of sending to device'
			-V':alias of --show-command'
			--dry-run':show command instead of sending to device'
			-w':alias of --show-command'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme write options" _wr
			;;
		(show-regs)
			local _shor
			_shor=(
			/dev/nvme':supply a device to use (required)'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme show-regs options" _shor
			;;
		(fid-support-effects-log)
			local _fidsupporteffectslog
			_fidsupporteffectslog=(
			/dev/nvme':supply a device to use (required)'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fid-support-effects-log options" _fidsupporteffectslog
			;;
		(discover)
			local _discover
			_discover=(
			--device=':use existing discovery controller device'
			-d':alias for --device'
			--transport=':transport type'
			-t':alias for --transport'
			--nqn=':subsystem nqn'
			-n':alias for --nqn'
			--traddr=':transport address'
			-a':alias for --traddr'
			--trsvcid=':transport service id (e.g. IP port)'
			-s':alias for --trsvcid'
			--host-traddr=':host traddr (e.g. FC WWN's)'
			-w':alias for --host-traddr'
			--host-iface=':host interface (for tcp transport)'
			-f':alias for --host-iface'
			--hostnqn=':user-defined hostnqn'
			-q':alias for --hostnqn'
			--hostid=':user-defined hostid (if default not used)'
			-I':alias for --hostid'
			--dhchap-secret=':user-defined dhchap key (if default not used)'
			-S':alias for --dhchap-secret'
			--nr-io-queues=':number of io queues to use (default is core count)'
			-i':alias for --nr-io-queues'
			--nr-write-queues=':number of write queues to use (default 0)'
			-W':alias for --nr-write-queues'
			--nr-poll-queues=':number of poll queues to use (default 0)'
			-P':alias for --nr-poll-queues'
			--queue-size=':number of io queue elements to use (default 128)'
			-Q':alias for --queue-size'
			--keep-alive-tmo=':keep alive timeout period in seconds'
			-k':alias for --keep-alive-tmo'
			--reconnect-delay=':reconnect timeout period in seconds'
			-c':alias for --reconnect-delay'
			--ctrl-loss-tmo=':controller loss timeout period in seconds'
			-l':alias for --ctrl-loss-tmo'
			--tos=':type of service'
			-T':alias for --tos'
			--keyring=':Keyring for TLS key lookup'
			--tls_key=':TLS key to use'
			--duplicate-connect':allow duplicate connections between same transport host and subsystem port'
			-D':alias for --duplicate-connect'
			--disable-sqflow':disable controller sq flow control (default false)'
			--hdr-digest':enable transport protocol header digest (TCP transport)'
			-g':alias for --hdr-digest'
			--data-digest':enable transport protocol data digest (TCP transport)'
			-G':alias for --data-digest'
			--tls':enable TLS'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw':save raw output to file'
			-r':alias of --raw'
			--persistent':'
			-p':alias for --'
			--quiet':'
			--config=':Use specified JSON configuration file or none to disable'
			-J':alias for --config'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			--force':Force persistent discovery controller creation'
			--nbft':Only look at NBFT tables'
			--no-nbft':Do not look at NBFT tables'
			--nbft-patch=':user-defined path for NBFT tables'
			--owner=':record this owner in the registry'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme discover options" _discover
			;;
		(connect-all)
			local _connect_all
			_connect_all=(
			--device=':use existing discovery controller device'
			-d':alias for --device'
			--transport=':transport type'
			-t':alias for --transport'
			--nqn=':subsystem nqn'
			-n':alias for --nqn'
			--traddr=':transport address'
			-a':alias for --traddr'
			--trsvcid=':transport service id (e.g. IP port)'
			-s':alias for --trsvcid'
			--host-traddr=':host traddr (e.g. FC WWN's)'
			-w':alias for --host-traddr'
			--host-iface=':host interface (for tcp transport)'
			-f':alias for --host-iface'
			--hostnqn=':user-defined hostnqn'
			-q':alias for --hostnqn'
			--hostid=':user-defined hostid (if default not used)'
			-I':alias for --hostid'
			--dhchap-secret=':user-defined dhchap key (if default not used)'
			-S':alias for --dhchap-secret'
			--nr-io-queues=':number of io queues to use (default is core count)'
			-i':alias for --nr-io-queues'
			--nr-write-queues=':number of write queues to use (default 0)'
			-W':alias for --nr-write-queues'
			--nr-poll-queues=':number of poll queues to use (default 0)'
			-P':alias for --nr-poll-queues'
			--queue-size=':number of io queue elements to use (default 128)'
			-Q':alias for --queue-size'
			--keep-alive-tmo=':keep alive timeout period in seconds'
			-k':alias for --keep-alive-tmo'
			--reconnect-delay=':reconnect timeout period in seconds'
			-c':alias for --reconnect-delay'
			--ctrl-loss-tmo=':controller loss timeout period in seconds'
			-l':alias for --ctrl-loss-tmo'
			--tos=':type of service'
			-T':alias for --tos'
			--keyring=':Keyring for TLS key lookup'
			--tls_key=':TLS key to use'
			--duplicate-connect':allow duplicate connections between same transport host and subsystem port'
			-D':alias for --duplicate-connect'
			--disable-sqflow':disable controller sq flow control (default false)'
			--hdr-digest':enable transport protocol header digest (TCP transport)'
			-g':alias for --hdr-digest'
			--data-digest':enable transport protocol data digest (TCP transport)'
			-G':alias for --data-digest'
			--tls':enable TLS'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw':save raw output to file'
			-r':alias of --raw'
			--persistent':'
			-p':alias for --'
			--quiet':'
			--config=':Use specified JSON configuration file or none to disable'
			-J':alias for --config'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			--force':Force persistent discovery controller creation'
			--nbft':Only look at NBFT tables'
			--no-nbft':Do not look at NBFT tables'
			--nbft-patch=':user-defined path for NBFT tables'
			--owner=':record this owner in the registry'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme connect-all options" _connect_all
			;;
		(connect)
			local _connect
			_connect=(
			--transport=':transport type'
			-t':alias for --transport'
			--nqn=':subsystem nqn'
			-n':alias for --nqn'
			--traddr=':transport address'
			-a':alias for --traddr'
			--trsvcid=':transport service id (e.g. IP port)'
			-s':alias for --trsvcid'
			--host-traddr=':host transport address'
			-w':alias for --host-traddr'
			--host-iface=':host interface (for tcp transport)'
			-f':alias for --host-iface'
			--hostnqn=':user-defined hostnqn'
			-q':alias for --hostnqn'
			--hostid=':user-defined hostid (if default not used)'
			-I':alias for --hostid'
			--dhchap-secret=':user-defined dhchap key (if default not used)'
			-S':alias for --dhchap-secret'
			--nr-io-queues=':number of io queues to use (default is core count)'
			-i':alias for --nr-io-queues'
			--nr-write-queues=':number of write queues to use (default 0)'
			-W':alias for --nr-write-queues'
			--nr-poll-queues=':number of poll queues to use (default 0)'
			-P':alias for --nr-poll-queues'
			--queue-size=':number of io queue elements to use (default 128)'
			-Q':alias for --queue-size'
			--keep-alive-tmo=':keep alive timeout period in seconds'
			-k':alias for --keep-alive-tmo'
			--reconnect-delay=':reconnect timeout period in seconds'
			-c':alias for --reconnect-delay'
			--ctrl-loss-tmo=':controller loss timeout period in seconds'
			-l':alias for --ctrl-loss-tmo'
			--tos=':type of service'
			-T':alias for --tos'
			--keyring=':Keyring for TLS key lookup'
			--tls_key=':TLS key to use'
			--duplicate-connect':allow duplicate connections between same transport host and subsystem port'
			-D':alias for --duplicate-connect'
			--disable-sqflow':disable controller sq flow control (default false)'
			--hdr-digest':enable transport protocol header digest (TCP transport)'
			-g':alias for --hdr-digest'
			--data-digest':enable transport protocol data digest (TCP transport)'
			-G':alias for --data-digest'
			--tls':enable TLS'
			--dhchap-ctrl-secret=':user-defined dhchap controller key (for bi-directional authentication)'
			-C':alias for --dhchap-ctrl-secret'
			--config=':Use specified JSON configuration file or none to disable'
			-J':alias for --config'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json'
			-o':alias for --output-format'
			--owner=':record this owner in the registry'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme connect options" _connect
			;;
		(dim)
			local _dim
			_dim=(
			--nqn=':Comma-separated list of DC nqn'
			-n':alias for --nqn'
			--device=':Comma-separated list of DC nvme device handle'
			-d':alias for --device'
			--task=':The task to perform: register|deregister'
			-t':alias for --task'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dim options" _dim
			;;
		(disconnect)
			local _disconnect
			_disconnect=(
			--nqn=':subsystem nqn'
			-n':alias for --nqn'
			--device=':nvme device handle'
			-d':alias for --device'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme disconnect options" _disconnect
			;;
		(disconnect-all)
			local _disconnect_all
			_disconnect_all=(
			--transport=':transport type'
			-t':alias for --transport'
			--verbose':Increase logging verbosity'
			-v':alias for --verbose'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme disconnect-all options" _disconnect_all
			;;
		(gen-hostnqn)
			local _gen_hostnqn
			_gen_hostnqn=(
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme gen-hostnqn options" _gen_hostnqn
			;;
		(show-hostnqn)
			local _show_hostnqn
			_show_hostnqn=(
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme show-hostnqn options" _show_hostnqn
			;;
		(dir-receive)
			local _dir_receive
			_dir_receive=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--dir-type=':directive type'
			-D':alias of --dir-type'
			--dir-spec=':directive specific'
			-S':alias of --dir-spec'
			--dir-oper=':directive operation'
			-O':alias of --dir-oper'
			--req-resource=':namespace stream requested'
			-r':alias of --req-resource'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dir-receive options" _dir_receive
			;;
		(dir-send)
			local _dir_send
			_dir_send=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--dir-type=':directive type'
			-D':alias of --dir-type'
			--target-dir=':target directive type to be enabled/disabled'
			-T':alias of --target-dir'
			--dir-spec=':directive specific'
			-S':alias of --dir-spec'
			--dir-oper=':directive operation'
			-O':alias of --dir-oper'
			--endir=':directive enable'
			-e':alias of --endir'
			--raw-binary':dump output in binary format'
			-b':alias for --raw-binary'
			--input-file=':write/send file (default stdin)'
			-i':alias of --input-file'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dir-send options" _dir_send
			;;
		(virt-mgmt)
			local _virt_mgmt
			_virt_mgmt=(
			/dev/nvme':supply a device to use (required)'
			--cntlid=':Controller Identifier(CNTLID)'
			-c':alias of --cntlid'
			--rt=':Resource Type(RT): 0|1'
			-r':alias of --rt'
			--act=':Action(ACT): 1|7|8|9'
			-a':alias of --act'
			--nr=':Number of Controller Resources(NR)'
			-n':alias of --nr'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme virt-mgmt options" _virt_mgmt
			;;
		(rpmb)
			local _rpmb
			_rpmb=(
			/dev/nvme':supply a device to use (required)'
			--cmd=':RPMB action: info|program-key|read-counter|write-data|read-data|write-config|read-config'
			-c':alias of --cmd'
			--msgfile=':data file for read/write-data, read/write-config options'
			-f':alias of --msgfile'
			--keyfile=':key file that has authentication key to be used'
			-g':alias of --keyfile'
			--key=':key to be used for authentication'
			-k':alias of --key'
			--msg=':data to be written on write-data or write-config commands'
			-d':alias of --msg'
			--address=':Sector offset to read from or write to for an RPMB target, default 0'
			-o':alias of --address'
			--blocks=':Number of 512 blocks to read or write'
			-b':alias of --blocks'
			--target=':RPMB target - numerical value of 0 to 6, default 0'
			-t':alias of --target'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme rpmb options" _rpmb
			;;
		(show-topology)
			local _showtopology
			_showtopology=(
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--verbose':show infos verbosely'
			-v':alias of --verbose'
			--ranking=':Ranking order: namespace|ctrl'
			-r':alias for --ranking'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme show-topology options" _showtopology
			;;
		(nvme-mi-recv)
			local _nvme_mi_recv
			_nvme_mi_recv=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':NVMe-MI opcode to send'
			-O':alias of --opcode'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--nmimt':value for NVMe-MI message type'
			-m':alias of --nmimt'
			--nmd0':value for NVMe management request dword 0'
			-0':alias of --nmd0'
			--nmd1':value for NVMe management request dword 1'
			-1':alias of --nmd1'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvme-mi-recv options" _nvme_mi_recv
			;;
		(nvme-mi-send)
			local _nvme_mi_send
			_nvme_mi_send=(
			/dev/nvme':supply a device to use (required)'
			--opcode=':NVMe-MI opcode to send'
			-O':alias of --opcode'
			--namespace-id=':value for nsid'
			-n':alias of --namespace-id'
			--data-len=':length for data buffer'
			-l':alias of --data-len'
			--nmimt':value for NVMe-MI message type'
			-m':alias of --nmimt'
			--nmd0':value for NVMe management request dword 0'
			-0':alias of --nmd0'
			--nmd1':value for NVMe management request dword 1'
			-1':alias of --nmd1'
			--input-file=':defaults to stdin; input for write (send direction)'
			-i':alias for --input-file'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme nvme-mi-send options" _nvme_mi_send
			;;
		(get-reg)
			local _get_reg
			_get_reg=(
			/dev/nvme':supply a device to use (required)'
			--offset=':offset of the requested register'
			-O':alias for --offset'
			--cap':CAP=0x0 register offset'
			--vs':VS=0x8 register offset'
			--cmbloc':CMBLOC=0x38 register offset'
			--cmbsz':CMBSZ=0x3c register offset'
			--bpinfo':BPINFO=0x40 register offset'
			--cmbsts':CMBSTS=0x58 register offset'
			--cmbebs':CMBEBS=0x5c register offset'
			--cmbswtp':CMBSWTP=0x60 register offset'
			--crto':CRTO=0x68 register offset'
			--pmrcap':PMRCAP=0xe00 register offset'
			--pmrsts':PMRSTS=0xe08 register offset'
			--pmrebs':PMREBS=0xe0c register offset'
			--pmrswtp':PMRSWTP=0xe10 register offset'
			--intms':INTMS=0xc register offset'
			--intmc':INTMC=0x10 register offset'
			--cc':CC=0x14 register offset'
			--csts':CSTS=0x1c register offset'
			--nssr':NSSR=0x20 register offset'
			--aqa':AQA=0x24 register offset'
			--asq':ASQ=0x28 register offset'
			--acq':ACQ=0x30 register offset'
			--bprsel':BPRSEL=0x44 register offset'
			--bpmbl':BPMBL=0x48 register offset'
			--cmbmsc':CMBMSC=0x50 register offset'
			--nssd':NSSD=0x64 register offset'
			--pmrctl':PMRCTL=0xe04 register offset'
			--pmrmscl':PMRMSCL=0xe14 register offset'
			--pmrmscu':PMRMSCU=0xe18 register offset'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme get-reg options" _get_reg
			;;
		(set-reg)
			local _set_reg
			_set_reg=(
			/dev/nvme':supply a device to use (required)'
			--offset=':offset of the requested register'
			-O':alias for --offset'
			--value=':the value of the register to be set'
			-V':alias for --value'
			--mmio32':Access 64-bit registers as 2 32-bit'
			-m':alias for --mmio32'
			--intms=':INTMS=0xc register offset'
			--intmc=':INTMC=0x10 register offset'
			--cc=':CC=0x14 register offset'
			--csts=':CSTS=0x1c register offset'
			--nssr=':NSSR=0x20 register offset'
			--aqa=':AQA=0x24 register offset'
			--asq=':ASQ=0x28 register offset'
			--acq=':ACQ=0x30 register offset'
			--bprsel=':BPRSEL=0x44 register offset'
			--bpmbl=':BPMBL=0x48 register offset'
			--cmbmsc=':CMBMSC=0x50 register offset'
			--nssd=':NSSD=0x64 register offset'
			--pmrctl=':PMRCTL=0xe04 register offset'
			--pmrmscl=':PMRMSCL=0xe14 register offset'
			--pmrmscu=':PMRMSCU=0xe18 register offset'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme set-reg options" _set_reg
			;;
		(io-mgmt-recv)
			local _io_mgmt_recv
			_io_mgmt_recv=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':identifier of desired namespace'
			-n':alias for --namespace-id'
			--mos=':management operation specific'
			-s':alias for --mos'
			--mo=':management operation'
			-m':alias for --mo'
			--data=':optional file for data (default stdout)'
			-d':alias for --data'
			--data-len=':buffer len (if) data is received'
			-l':alias for --data-len'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme io-mgmt-recv-reg options" _io_mgmt_recv
			;;
		(io-mgmt-send)
			local _io_mgmt_send
			_io_mgmt_send=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':identifier of desired namespace'
			-n':alias for --namespace-id'
			--mos=':management operation specific'
			-s':alias for --mos'
			--mo=':management operation'
			-m':alias for --mo'
			--data=':optional file for data (default stdin)'
			-d':alias for --data'
			--data-len=':buffer len (if) data is sent'
			-l':alias for --data-len'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme io-mgmt-send options" _io_mgmt_send
			;;
		(mgmt-addr-list-log)
			local _mal_log
			_mal_log=(
			/dev/nvme':supply a device to use (required)'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme mgmt-addr-list-log" _mal_log
			;;
		(rotational-media-info-log)
			local _rmi_log
			_rmi_log=(
			/dev/nvme':supply a device to use (required)'
			--endg-id=':Endurance Group Identifier'
			-e':alias of --endg-id'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme rotational-media-info-log" _rmi_log
			;;
		(changed-alloc-ns-list-log)
			local _changed_alloc_ns_list_log
			_changed_alloc_ns_list_log=(
			/dev/nvme':supply a device to use (required)'
			--output-format=':Output format: normal|json|binary'
			-o':alias for --output-format'
			--raw-binary':dump infos in binary format'
			-b':alias of --raw-binary'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme changed-alloc-ns-list-log options" _changed_alloc_ns_list_log
			;;
		(dispersed-ns-participating-nss-log)
			local _dns_psub_log
			_dns_psub_log=(
			/dev/nvme':supply a device to use (required)'
			--namespace-id=':show infos for namespace <nsid>'
			-n':alias of --namespace-id'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dispersed-ns-participating-nss-log" _dns_psub_log
			;;
		(reachability-groups-log)
			local _rg_log
			_rg_log=(
			/dev/nvme':supply a device to use (required)'
			--groups-only':Return Groups Only'
			-g':alias for --groups-only'
			--rae':Retain an Asynchronous Event'
			-r':alias for --rae'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme reachability-groups-log" _rg_log
			;;
		(reachability-associations-log)
			local _ra_log
			_ra_log=(
			/dev/nvme':supply a device to use (required)'
			--associations-only':Return Associations Only'
			-a':alias for --associations-only'
			--rae':Retain an Asynchronous Event'
			-r':alias for --rae'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme reachability-associationsroups-log" _ra_log
			;;
		(host-discovery-log)
			local _hd_log
			_hd_log=(
			/dev/nvme':supply a device to use (required)'
			--all-host-entries':All Host Entries'
			-a':alias for --all-host-entries'
			--rae':Retain an Asynchronous Event'
			-r':alias for --rae'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme host-discovery-log" _hd_log
			;;
		(ave-discovery-log)
			local _ad_log
			_ad_log=(
			/dev/nvme':supply a device to use (required)'
			--rae':Retain an Asynchronous Event'
			-r':alias for --rae'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme ave-discovery-log" _ad_log
			;;
		(pull-model-ddr-req-log)
			local _pmdr_log
			_pmdr_log=(
			/dev/nvme':supply a device to use (required)'
			--rae':Retain an Asynchronous Event'
			-r':alias for --rae'
			--verbose':Increase the information detail in the output.'
			-v':alias for --verbose'
			--output-format=':Output format: normal|json|binary'
			-o ':alias for --output-format'
			--timeout=':value for timeout'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme pull-model-ddr-req-log" _pmdr_log
			;;
		(version)
			local _version
			_version=(
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme version options" _version
			;;
		(ocp)
			local _ocp
			_ocp=(
			smart-add-log':Retrieve Extended SMART Information'
			latency-monitor-log':Retrieve Latency Monitor Log Page'
			set-latency-monitor-feature':Set Latency Monitor Feature'
			internal-log':Retrieve and Save Internal Device Telemetry Log'
			clear-fw-activate-history':Clear Firmware Update History'
			eol-plp-failure-mode':Define EOL or PLP Circuitry Failure Mode'
			clear-pcie-correctable-errors':Clear PCIe Correctable Error Counters'
			fw-activate-history':Retrieve Firmware Activation History Log Page'
			unsupported-reqs-log':Retrieve Unsupported Requirements Log Page'
			error-recovery-log':Retrieve Error Recovery Log Page'
			device-capability-log':Retrieve Device Capabilities Log Page'
			set-dssd-power-state-feature':Set DSSD Power State Feature'
			get-dssd-power-state-feature':Get DSSD Power State Feature'
			set-plp-health-check-interval':Set PLP Health Check Interval'
			get-plp-health-check-interval':Get PLP Health Check Interval'
			telemetry-string-log':Retrieve Telemetry String Log Page'
			set-telemetry-profile':Set Telemetry Profile Feature'
			set-dssd-async-event-config':Set DSSD Asynchronous Event Configuration'
			get-dssd-async-event-config':Get DSSD Asynchronous Event Configuration'
			tcg-configuration-log':Retrieve TCG Configuration Log Page'
			get-error-injection':Get Error Injection Feature'
			set-error-injection':Set Error Injection Feature'
			get-enable-ieee1667-silo':Get Enable IEEE1667 Silo Feature'
			set-enable-ieee1667-silo':Set Enable IEEE1667 Silo Feature'
			hardware-component-log':Retrieve Hardware Component Log Page'
			get-latency-monitor':Get Latency Monitor Feature'
			get-clear-pcie-correctable-errors':Get Clear PCIe Correctable Error Counters Feature'
			get-telemetry-profile':Get Telemetry Profile Feature'
			persistent-event-log':Retrieve Persistent Event Log with OCP Events'
			get-idle-wakeup-time':Get Idle Wake Up Time Configuration'
			version':Shows the program version'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme ocp options" _ocp
			;;
		(solidigm)
			local _solidigm
			_solidigm=(
			id-ctrl':Send NVMe Identify Controller'
			smart-log-add':Retrieve Solidigm SMART Log'
			vs-smart-add-log':Get SMART / health extended log (redirects to ocp plug-in)'
			vs-internal-log':Retrieve Debug log binaries'
			garbage-collect-log':Retrieve Garbage Collection Log'
			market-log':Retrieve Market Log'
			latency-tracking-log':Enable/Retrieve Latency tracking Log'
			parse-telemetry-log':Parse Telemetry Log binary'
			clear-pcie-correctable-errors':Clear PCIe Correctable Error Counters (redirects to ocp plug-in)'
			clear-fw-activate-history':Clear firmware update history log (redirects to ocp plug-in)'
			vs-fw-activate-history':Get firmware activation history log (redirects to ocp plug-in)'
			log-page-directory':Retrieve log page directory'
			temp-stats':Retrieve Temperature Statistics log'
			vs-drive-info':Retrieve drive information'
			workload-tracker':Enable/Disable and configure Workload Tracker'
			cloud-SSDplugin-version':Prints plug-in OCP version'
			version':Shows the program version'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme solidigm options" _solidigm
			;;
		(fdp)
			local _fdp
			_fdp=(
			feature':Show, enable or disable FDP configuration'
			version':Shows the plug-in version'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme fdp options" _fdp
			;;
		(micron)
			local micron
			_micron=(
			select-download':Selective Firmware Download'
			vs-temperature-stats':Retrieve Micron temperature statistics'
			vs-pcie-stats':Retrieve Micron PCIe error stats'
			clear-pcie-correctable-errors':Clear correctable PCIe errors'
			vs-internal-log':Retrieve Micron logs'
			vs-telemetry-controller-option':Enable/Disable controller telemetry log generation'
			vs-nand-stats':Retrieve NAND Stats'
			vs-smart-ext-log':Retrieve extended SMART logs'
			vs-drive-info':Retrieve Drive information'
			plugin-version':Display plugin version info'
			cloud-SSD-plugin-version':Display plugin version info'
			log-page-directory':Retrieve log page directory'
			vs-fw-activate-history':Display FW activation history'
			latency-tracking':Latency monitoring feature control'
			latency-stats':Latency information for tracked commands'
			latency-logs':Latency log details tracked by drive'
			vs-smart-add-log':Retrieve extended SMART data'
			clear-fw-activate-history':Clear FW activation history'
			vs-smbus-option':Enable/Disable SMBUS on the drive'
			ocp-telemetry-log-parse':Parse OCP Telemetry DA1 and DA2 logs'
			smart-log':Retrieve SMART/Health log with Micron vendor-specific fields'
			id-ctrl':Identify Controller with Micron vendor-specific fields'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme micron options" _micron
			;;
		(dapustor)
			local _dapustor
			_dapustor=(
			smart-log-add':Retrieve DapuStor SMART Log'
			version':Shows the program version'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme dapustor options" _dapustor
			;;
		(mangoboost)
			local _mangoboost
			_mangoboost=(
			id-ctrl':Send NVMe Identify Controller'
			version':Shows the program version'
			help':Display this help'
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "nvme mangoboost options" _mangoboost
			;;
		(help)
			local _h
			_h=( id-ctrl id-ns list-ns id-iocs create-ns delete-ns attach-ns detach-ns
			list-ctrl get-ns-id get-log fw-log smart-log error-log get-feature
			set-feature format fw-activate fw-download admin-passthru io-passthru
			security-send security-recv resv-acquire resv-register resv-release
			resv-report flush compare read write copy show-regs persistent-event-log
			pred-lat-event-agg-log nvm-id-ctrl endurance-event-agg-log lba-status-log
			resv-notif-log capacity-mgmt id-domain boot-part-log fid-support-effects-log
			supported-log-pages lockdown media-unit-stat-log id-ns-lba-format nvm-id-ns
			nvm-id-ns-lba-format supported-cap-config-log show-topology
			list list-subsys id-ns-granularity primary-ctrl-caps list-secondary ns-descs
			id-nvmset id-uuid list-endgrp telemetry-log changed-ns-list-log ana-log
			effects-log endurance-log device-self-test self-test-log set-property
			get-property write-zeroes write-uncor verify sanitize sanitize-log reset
			subsystem-reset ns-rescan get-lba-status dsm discover connect-all connect
			dim disconnect disconnect-all gen-hostnqn show-hostnqn dir-receive
			dir-send virt-mgmt rpmb version ocp solidigm dapustor mgmt-addr-list-log
			rotational-media-info-log changed-alloc-ns-list-log fdp mangoboost
			)
			_arguments '*:: :->subcmds'
			_describe -t commands "help: infos on a specific nvme command, or provide no option to see a synopsis of all nvme commands" _h
			;;
		(*)
			_files
			;;
		esac
		return
	fi

	_files
}