/
githubmirror
/
nmap
Обзор
Документация
Войти
/
githubmirror
/
nmap
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v7.991
ncat/ChangeLog
227 строк
8 KB
rewanth
Removes trailing spaces in 69 files. Closes #971.
23 авг 2017, 11:52
23 авг 2017, 11:52
6ee953a
Код
Авторство
О чём код?
# Ncat Changelog ($Id$); -*-text-*- o Reworked the test program test/test-cmdline-split slightly and added additional test cases. Rewrote cmdline_split in ncat_posix.c [Josh Marlow] o Added a test program, test/test-cmdline-split to test the cmdline_split function in test/test-cmdline-split in preparation for an eventual rewrite of cmdline_split [Josh Marlow]. Ncat 0.2 o Ported to Windows on Visual C++ Express 2008. Support isn't perfect because of the lack of a fork() call and because we had to implement a hack to get select()-like support for stdin on Windows, but most everything works fine. We hope to get around these issues in the future. [Kris Katterjohn, Mixter] o Added IPv6 listen support (including --broker). Host access control is not yet supported. [Kris] o Added SSL listen support (including --broker) [Kris] o Fixed SSL and IPv6 connect issues [Mixter] o Added IPv4 host access control to UDP listener and --broker [Kris] o Brokering mode now continually listens for connections rather than exiting after the last client disconnects. [Kris] o Changed -l to mostly behave like OpenBSD Netcat. Instead of -l specifying the local port number and -s specifying the local address to listen on, -l is a non-option flag and you specify the local address/port like you do a host to connect to in client-mode. [Kris] o Ncat's default port number is now 31337 instead of 5000. This because 5000 is used for other protocols, such as UPnP. [Kris] o Specifying no port number with -l now works to listen on Ncat's default port number. The original Netcat seems to just use an ephemeral port in this case, and other incarnations make you specify a port number. So now you don't have to specify a host or port number with -l, in which case Ncat listens on any address, port 31337. [Kris] o Fixed Ncat so that it actually works like it should when transferring a file between instances. Running "ncat -l 3333 <input" and then connecting with "ncat host 3333 >output" should send the input file from the server to the client. However actually doing this would either silently fail or complain about a broken pipe. Thanks to eldraco for reporting this problem. [Kris] o Client-mode Ncat now exits upon receipt of EOF from the network side [Kris] o Client-mode Ncat now just tries to read anything from the network (still via the Nsock library) rather than reading in a line-based manner. While being an improvement in its own right, this is especially helpful for the new Telnet negotiation option. [Kris] o Increased the default network data buffer sizes (reading and writing) from a measly 256 bytes to a more respectable 8K for TCP and 128K for UDP. UDP's is this large because a read returns an entire datagram, or discards what's left if there is no room. [Kris] o The proxy options have now changed. Instead of having separate option names for all of the different types of proxy protocols that will be supported, --proxy is available to specify the proxy address and optional port, and --proxy-type is available to specify the proxy protocol to use. [Kris] o Added an HTTP proxy server feature, which creates a simple forking HTTP proxy server on the listening port (only supports CONNECT). This is specified by "--proxy-type http" in server mode. [Kris] o The SOCKSv4 proxy option is now specified by "--proxy-type socks4" instead of --socks4-proxy. This option also now takes the username from --proxy-auth rather than the previous user@host:port syntax. [Kris] o The HTTP proxy option is now specified by "--proxy-type http" instead of --http-proxy. Also, the HTTP CONNECT request now uses CRLF for the EOL instead of just LF. [Kris] o Removed the SOCKS proxy server support because it was broken, didn't have any support for SOCKSv5, and we now have an HTTP proxy server for a similar purpose. [Kris] o Fixed --proxy-auth which always caused a segmentation fault. [Kris] o Fixed an issue which commonly occurred when using --proxy-type socks4 and when reading from a piped or redirected stdin. The problem was that Ncat was sending the data read from stdin across the network before it was fully connected to the proxy. Thanks to Jah for noticing this problem. [Kris] o The output options -o and -x are no longer mutually exclusive. Also, the documented alias for -x (--hex-dump) now works. [Kris] o Renamed -t (--idle-timeout) to -i [Kris] o Added -t/--telnet to handle DO/DONT WILL/WONT Telnet negotiations [Kris] o Added -C/--crlf to try to use CRLF for line-endings. This comes in handy when talking to some stringent servers directly from a terminal in one of the many common plain-text protocols which specify CRLF as the required EOL sequence. [Kris] o Added -w/--wait for specifying a connect timeout [Kris] o Added -g and -G for IPv4 loose source routing [Kris] o Added -p to specify a local port to bind to in client-mode [Kris] o Added -n/--nodns to not resolve any hostnames [Mixter] o Added -c/--sh-exec, which is like -e but executes via /bin/sh [Kris] o Made -s (set source address) actually work in client-mode [Kris] o Changed --recvonly and --sendonly to --recv-only and --send-only [Kris] o Options taking a time (-d, -i, -w) are now more flexible: you can append an "s" for seconds, "m" for minutes or "h" for hours (e.g. 30s) [Kris] o Fixed a bug which could cause Nsock tracing (use of -v one or more times) to print very inaccurate times [Kris] o Removed unused XOR code [Kris] o Added file dependency checking to the Makefile. So now, for instance, if a header file is modified, running make again will recompile all of the files which depend on it. [Kris] o Improved the build system by removing the automake requirement ([Mixter]) and by cutting down configure.ac and Makefile.in a lot ([Kris]). Other various build/configure improvements were made as well. o Lots of documentation rewrites/updates, including separating the man page into sections such as "Proxy Options", "Client-Mode Options", etc. [Kris] o Lots of code cleaning up [Kris] Ncat 0.10rc3 o Autoconf build process. ./configure;make! o Fixed Segmentation faults on outgoing connections that appeared on on certain platforms/architectures/compilers. o Improved overall build quality and portability to other platforms and architectures. Should build on multiple different platforms quite well. o Fixed some bounds checking on a SOCKS4 server buffer in ncat_connect.c o Fixed some documentation typos and --help/usage typos. Ncat 0.10rc2 o Fixed inetd-like support so executed programs actually exit when the client does and don't hang. o Fixed some looping read/write issue with EOF handling. -- Thanks to Sebastian Garcia. o Moved connect message "Lookup of $foo returned $bar" to the verbosity output set instead of the default output. o Fixed bug in SOCKS4 server on rejected/refused connections. o First official release! Ncat 0.10rc1 o Removed access to XOR code with a view to totally removing it in the next release of Ncat o One or two minor bug fixes. Ncat 0.09 o Added hexdump() support. o Added XOR cipher support. o Added --allow, --deny support IP address handling CIDR. o General code tidy up; better documentation in header file. o Various error messages cleaned up. Added new #define for NCAT_SHORT. o Added missing 'strerror(errno)' handling to some error messages. o Cleaned up various bits of code. o Reformatted code heavily into K&R layout. o Fixed XOR so it'll use longer passwords. o Worked on various cross-platform portability issues. -- Thanks to Jonathan Saylor. Ncat 0.08 o Added millisecond resolution timer for blocking read/writes. o Added HTTP/1.1 CONNECT method proxying support. o Added Base64 encoder for handling Proxy-Authorization support. o Support added for --broker, full I/O multiplexing support. o Added additional feature of --talk Ncat 0.07 o Added feature of fork()'ing off on executing a 3rd party program to allow continued incoming connections. o Added support for ASCII logging. o Added support for hexdump logging. o Various bits of code cleaned up. Ncat 0.06 o Added --listen support. o Added TCP/UDP support for --listen. o Added command line parser for handling options to pass to the command to be executed. o Polished up --help, --verbose & --version.