githubmirror/libuser

docs/sgml/libuser.sgml
195 строк8 KB
Miloslav Trmač
Remove the non-functional and unmaintained krb5 module.
23 янв 2014, 23:37
23 янв 2014, 23:373f1205a
<!doctype linuxdoc system>
<article>

<title>libuser 0.52.2</title>
<author>Nalin Dahyabhai <tt/&lt;nalin@redhat.com&gt;/
<date>28 September 2004
<abstract>This is the libuser administrator and programmer's guide.  It
first describes the motivation for the existence of this library, and
then delves into the library interface used by both libuser modules and
applications.</abstract>

<sect>Introduction

<p>This section describes libuser: why it was written, and how it works.  How
the library is to be used will be described later.

<sect1>Motivation

<p>When proper nsswitch functionality was introduced into glibc 2.0, it
became possible to supply third-party facilities which would allow the
standard C library (and by extension, all of a system's binaries) to pull
information about users, protocols, and services from a variety of sources
the glibc authors might not have anticipated.

<p>The most common use for a new nsswitch module is supplementing the user
and group databases, extending the data sources accessed over a network
to a centrally-managed information store.  This, along with the ability to
authenticate users using networked servers (functionality provided by the
increasingly-ubiquitous Linux-PAM library) and an enterprise-class
networked filesystem, allows a properly-configured Linux workstation to
participate as a full-fledged client in a large-scale network.

<p>The facilities provided by PAM allow a user to log in and change her
authentication tokens.  The nsswitch interface allows any user (even
unprivileged users like <bf>nobody</bf>) to look up information needed
to run applications.

<p>However, there are certain functions supplied by traditional isolated
systems which such a networked workstation can't provide.  Users have no
method for modifying their non-essential information (<bf>chfn</bf> is broken),
and the system administrator who previously had total power over the user and
group databases must now perform all administration at the server using
tools which are designed for general modification of the information
store (hand-editing zone files for hesiod databases, <bf>ldapmodify</bf>,
<bf>kadmin</bf>) instead of the traditionally-used tools.

</sect1>

<sect1>Alternative Solutions

<p>The software which comes closest to meeting these needs is
<bf>pwdb</bf>.  However, the pwdb library has a few design limitations
which make it unsuitable for this purpose.  Like the standard files-based
mechanisms, pwdb assumes that the superuser wields full power over the
databases it interfaces with.  The current version of pwdb provides no
facilities for managing groups(?).  The current version of pwdb can not be
extended easily by third parties due to its reliance on static linking.

</sect1>

<sect1>The libuser Library

<p>The libuser library implements a fully-modular system for reading,
modifying, creating, and removing user and group accounts and account
information.  Modules which provide access to information stores can
request information from the accessing user in order to authenticate to
the information store.

</sect1>

</sect>

<sect>System Administration

<p>This section describes libuser's configuration file and bundled
applications which may be of use to system administrators.

<sect1>Configuration

<p>The libuser configuration file is named <bf>libuser.conf</bf> and
usually lives in <bf>/etc</bf>.  Its format is the common format used
by numerous other programs.  Sections are marked by the section name
enclosed in square brackets (<bf>[section]</bf>), and configuration
directives within these sections are of the form <bf>key = value</bf>.

<p>The <bf>defaults</bf>, <bf>userdefaults</bf>, and <bf>groupdefaults</bf>
sections are used by the library itself.  The <bf>defaults</bf> section
specifies the directory where modules can be found (<bf>moduledir</bf>) and
lists the modules to be consulted when looking up user information.

<p>There are two lists of modules because <bf>libuser</bf> separates an
account's authentication information from other information.  This is done
to allow different information stores to be used for these functions, and
because some information stores can only hold authentication data (for
example, shadow).

<p>For the <bf>info_modules</bf> and <bf>auth_modules</bf> lists, order
is only important for account creation -- the library will attempt to
create a data entry for the user in each of the modules until one of them
succeeds (so if you prefer new accounts to be created in your LDAP
directory, then you'd make sure &quot;ldap&quot; was listed <it>before</it>
&quot;files&quot;).  For looking up account information, the order determines
precedence because the library stops searching after a module returns success
(so again, you'd want &quot;ldap&quot; listed before &quot;files&quot;).
Account modifications and deletions go straight to the information store which
is known to hold the user's information.

</sect1>

<sect1>Modules

<p>Specific modules implement access to specific information stores.  The
modules included in the source distribution are the <bf>files</bf> and
<bf>shadow</bf> modules.  Modules can supply and manipulate either (or both)
of two distinct types of data about a user: generic user information (the
UID, home directory, etc.), and authentication-related information.

<sect2>files

<p>The files module implements both information and authentication data
stores using the standard <bf>passwd</bf> and <bf>group</bf> files.

<p>This module uses the <bf>files</bf> section of the configuration file
to store configuration data.  It presently recognizes these flags:

<itemize>
<item>directory - the directory the <bf>passwd</bf> and <bf>group</bf> files
are to be stored in
</itemize>

</sect2>

<sect2>shadow

<p>The shadow module implements only an authentication data store using
the <bf>shadow</bf> and the <bf>gshadow</bf> files.  While the format of
these files (and even the existence of the <bf>gshadow</bf> file) varies
between OSs, this module supports the same file formats used by the shadow
password suite.

<p>This module uses the <bf>shadow</bf> section of the configuration file
to store configuration data.  It presently recognizes these flags:

<itemize>
<item>directory - the directory the <bf>shadow</bf> and <bf>gshadow</bf>
files are to be stored in.
</itemize>

</sect2>

<sect2>ldap

<p>The ldap module implements both information and authentication data stores
using an LDAP directory and a schema which (should) conform to RFC2307.  The
module expects the client and server to support access using LDAPv3 with TLS;
TLS is not required if the server is specified by URI.

<p>This module uses the <bf>ldap</bf> section of the configuration file
to store configuration data.  It presently recognizes these flags:

<itemize>
<item>server - the hostname or URI of the LDAP server
<item>basedn - the distinguished name which is the root of your tree
<item>user - the user name with which to perform SASL binds
<item>authuser - the authorization user name with which to perform SASL binds
<item>binddn - the distinguished name to connect as for administrative access
<item>userBranch - the distinguished name (relative to the basedn) under which
user account data is kept
<item>groupBranch - the distinguished name (relative to the basedn) under which
group account data is kept
</itemize>

</sect2>

</sect1>

<sect1>Applications

<p>Sample testbed applications which mimic the behavior of certain parts
of the shadow password suite are included in the libuser distribution.
To allow them to be used alongside existing utilities, their names have
been prefixed with the letter 'l'.

<p>As of this writing (version 0.7), this list of tools includes
workalikes for <bf>useradd</bf>, <bf>usermod</bf>, <bf>userdel</bf>,
<bf>groupadd</bf>, <bf>groupmod</bf>, <bf>groupdel</bf>, and <bf>chage</bf>.
It should be noted that none of these tools provide a means for modifying
the defaults they use, and no functions for creating, populating, moving, or
deleting user home directories are implemented.

</sect1>

</sect>

</article>