githubmirror/libtpms

src/tpm2/Time.c
273 строки11 KB
Stefan Berger
tpm2: Do not write permanent state if only clock changed
15 окт 2021, 22:19
15 окт 2021, 22:198651aff
/********************************************************************************/
/*										*/
/*		Functions relating to the TPM's time functions 	 		*/
/*			     Written by Ken Goldman				*/
/*		       IBM Thomas J. Watson Research Center			*/
/*            $Id: Time.c 1259 2018-07-10 19:11:09Z kgoldman $			*/
/*										*/
/*  Licenses and Notices							*/
/*										*/
/*  1. Copyright Licenses:							*/
/*										*/
/*  - Trusted Computing Group (TCG) grants to the user of the source code in	*/
/*    this specification (the "Source Code") a worldwide, irrevocable, 		*/
/*    nonexclusive, royalty free, copyright license to reproduce, create 	*/
/*    derivative works, distribute, display and perform the Source Code and	*/
/*    derivative works thereof, and to grant others the rights granted herein.	*/
/*										*/
/*  - The TCG grants to the user of the other parts of the specification 	*/
/*    (other than the Source Code) the rights to reproduce, distribute, 	*/
/*    display, and perform the specification solely for the purpose of 		*/
/*    developing products based on such documents.				*/
/*										*/
/*  2. Source Code Distribution Conditions:					*/
/*										*/
/*  - Redistributions of Source Code must retain the above copyright licenses, 	*/
/*    this list of conditions and the following disclaimers.			*/
/*										*/
/*  - Redistributions in binary form must reproduce the above copyright 	*/
/*    licenses, this list of conditions	and the following disclaimers in the 	*/
/*    documentation and/or other materials provided with the distribution.	*/
/*										*/
/*  3. Disclaimers:								*/
/*										*/
/*  - THE COPYRIGHT LICENSES SET FORTH ABOVE DO NOT REPRESENT ANY FORM OF	*/
/*  LICENSE OR WAIVER, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, WITH	*/
/*  RESPECT TO PATENT RIGHTS HELD BY TCG MEMBERS (OR OTHER THIRD PARTIES)	*/
/*  THAT MAY BE NECESSARY TO IMPLEMENT THIS SPECIFICATION OR OTHERWISE.		*/
/*  Contact TCG Administration (admin@trustedcomputinggroup.org) for 		*/
/*  information on specification licensing rights available through TCG 	*/
/*  membership agreements.							*/
/*										*/
/*  - THIS SPECIFICATION IS PROVIDED "AS IS" WITH NO EXPRESS OR IMPLIED 	*/
/*    WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR 	*/
/*    FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, COMPLETENESS, OR 		*/
/*    NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS, OR ANY WARRANTY 		*/
/*    OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.		*/
/*										*/
/*  - Without limitation, TCG and its members and licensors disclaim all 	*/
/*    liability, including liability for infringement of any proprietary 	*/
/*    rights, relating to use of information in this specification and to the	*/
/*    implementation of this specification, and TCG disclaims all liability for	*/
/*    cost of procurement of substitute goods or services, lost profits, loss 	*/
/*    of use, loss of data or any incidental, consequential, direct, indirect, 	*/
/*    or special damages, whether under contract, tort, warranty or otherwise, 	*/
/*    arising in any way out of use or reliance upon this specification or any 	*/
/*    information herein.							*/
/*										*/
/*  (c) Copyright IBM Corp. and others, 2016 - 2018				*/
/*										*/
/********************************************************************************/

/* 8.10.1 Introduction */
/* This file contains the functions relating to the TPM's time functions including the interface to
   the implementation-specific time functions. */
/* 8.10.2 Includes */
#include "Tpm.h"
#include "PlatformData.h"
/* 8.10.3 Functions */
/* 8.10.3.1 TimePowerOn() */
/* This function initialize time info at _TPM_Init(). */
/* This function is called at _TPM_Init() so that the TPM time can start counting as soon as the TPM
   comes out of reset and doesn't have to wait until TPM2_Startup() in order to begin the new time
   epoch. This could be significant for systems that could get powered up but not run any TPM
   commands for some period of time. */
void
TimePowerOn(
	    void
	    )
{
    g_time = _plat__TimerRead();
}
/* 8.10.3.2 TimeNewEpoch() */
/* This function does the processing to generate a new time epoch nonce and set NV for update. This
   function is only called when NV is known to be available and the clock is running. The epoch is
   updated to persistent data. */
static void
TimeNewEpoch(
	     void
	     )
{
#if CLOCK_STOPS
    CryptRandomGenerate(sizeof(CLOCK_NONCE), (BYTE *)&g_timeEpoch);
#else
    // if the epoch is kept in NV, update it.
    gp.timeEpoch++;
    NV_SYNC_PERSISTENT(timeEpoch);
#endif
    // Clean out any lingering state
    _plat__TimerWasStopped();
}
/* 8.10.3.3 TimeStartup() */
/* This function updates the resetCount and restartCount components of TPMS_CLOCK_INFO structure at
   TPM2_Startup(). */
/* This function will deal with the deferred creation of a new epoch. TimeUpdateToCurrent() will not
   start a new epoch even if one is due when TPM_Startup() has not been run. This is because the
   state of NV is not known until startup completes. When Startup is done, then it will create the
   epoch nonce to complete the initializations by calling this function. */
void
TimeStartup(
	    STARTUP_TYPE     type           // IN: start up type
	    )
{
    NOT_REFERENCED(type);
    // If the previous cycle is orderly shut down, the value of the safe bit
    // the same as previously saved.  Otherwise, it is not safe.
    if(!NV_IS_ORDERLY)
	go.clockSafe = NO;
    return;
}
/* 8.10.3.4 TimeClockUpdate() */
/* This function updates go.clock. If newTime requires an update of NV, then NV is checked for
   availability. If it is not available or is rate limiting, then go.clock is not updated and the
   function returns an error. If newTime would not cause an NV write, then go.clock is updated. If
   an NV write occurs, then go.safe is SET. */
void
TimeClockUpdate(
		UINT64           newTime    // IN: New time value in mS.
		)
{
#define CLOCK_UPDATE_MASK  ((1ULL << NV_CLOCK_UPDATE_INTERVAL)- 1)
    // Check to see if the update will cause a need for an nvClock update
    if((newTime | CLOCK_UPDATE_MASK) > (go.clock | CLOCK_UPDATE_MASK))
	{
	    pAssert(g_NvStatus == TPM_RC_SUCCESS);
	    // Going to update the NV time state so SET the safe flag
	    go.clockSafe = YES;
	    // update the time
	    go.clock = newTime;

	    /* libtpms: Changing the clock alone does not cause the permanent
	     *          state to be written to storage, there must be other
	     *          reasons as well.
	     */
	    UPDATE_TYPE old_g_updateNV = g_updateNV;	// libtpms added

	    NvWrite(NV_ORDERLY_DATA, sizeof(go), &go);

	    g_updateNV = old_g_updateNV;		// libtpms added
	}
    else
	// No NV update needed so just update
	go.clock = newTime;
}
/* 8.10.3.5 TimeUpdate() */
/* This function is used to update the time and clock values. If the TPM has run TPM2_Startup(),
   this function is called at the start of each command. If the TPM has not run TPM2_Startup(), this
   is called from TPM2_Startup() to get the clock values initialized. It is not called on command
   entry because, in this implementation, the go structure is not read from NV until
   TPM2_Startup(). The reason for this is that the initialization code (_TPM_Init()) may run before
   NV is accessible. */
void
TimeUpdate(
	   void
	   )
{
    UINT64          elapsed;
    //
    // Make sure that we consume the current _plat__TimerWasStopped() state.
    if(_plat__TimerWasStopped())
	{
	    TimeNewEpoch();
	}
    // Get the difference between this call and the last time we updated the tick
    // timer.
    elapsed = _plat__TimerRead() - g_time;
    // Don't read +
    g_time += elapsed;
    // Don't need to check the result because it has to be success because have
    // already checked that NV is available.
    TimeClockUpdate(go.clock + elapsed);
    // Call self healing logic for dictionary attack parameters
    DASelfHeal();
}
/* 8.10.3.6 TimeUpdateToCurrent() */
/* This function updates the Time and Clock in the global TPMS_TIME_INFO structure. */
/* In this implementation, Time and Clock are updated at the beginning of each command and the
   values are unchanged for the duration of the command. */
/* Because Clock updates may require a write to NV memory, Time and Clock are not allowed to advance
   if NV is not available. When clock is not advancing, any function that uses Clock will fail and
   return TPM_RC_NV_UNAVAILABLE or TPM_RC_NV_RATE. */
/* This implementation does not do rate limiting. If the implementation does do rate limiting, then
   the Clock update should not be inhibited even when doing rate limiting. */
void
TimeUpdateToCurrent(
		    void
		    )
{
    // Can't update time during the dark interval or when rate limiting so don't
    // make any modifications to the internal clock value. Also, defer any clock
    // processing until TPM has run TPM2_Startup()
    if(!NV_IS_AVAILABLE || !TPMIsStarted())
	return;
    TimeUpdate();
}
/* 8.10.3.7 TimeSetAdjustRate() */
/* This function is used to perform rate adjustment on Time and Clock. */
void
TimeSetAdjustRate(
		  TPM_CLOCK_ADJUST     adjust         // IN: adjust constant
		  )
{
    switch(adjust)
	{
	  case TPM_CLOCK_COARSE_SLOWER:
	    _plat__ClockAdjustRate(CLOCK_ADJUST_COARSE);
	    break;
	  case TPM_CLOCK_COARSE_FASTER:
	    _plat__ClockAdjustRate(-CLOCK_ADJUST_COARSE);
	    break;
	  case TPM_CLOCK_MEDIUM_SLOWER:
	    _plat__ClockAdjustRate(CLOCK_ADJUST_MEDIUM);
	    break;
	  case TPM_CLOCK_MEDIUM_FASTER:
	    _plat__ClockAdjustRate(-CLOCK_ADJUST_MEDIUM);
	    break;
	  case TPM_CLOCK_FINE_SLOWER:
	    _plat__ClockAdjustRate(CLOCK_ADJUST_FINE);
	    break;
	  case TPM_CLOCK_FINE_FASTER:
	    _plat__ClockAdjustRate(-CLOCK_ADJUST_FINE);
	    break;
	  case TPM_CLOCK_NO_CHANGE:
	    break;
	  default:
	    FAIL(FATAL_ERROR_INTERNAL);
	    break;
	}
    return;
}
/* 8.10.3.8 TimeGetMarshaled() */
/* This function is used to access TPMS_TIME_INFO in canonical form. The function collects the time
   information and marshals it into dataBuffer and returns the marshaled size */
/* Return Value Meaning */
UINT16
TimeGetMarshaled(
		 TIME_INFO       *dataBuffer     // OUT: result buffer
		 )
{
    TPMS_TIME_INFO      timeInfo;
    // Fill TPMS_TIME_INFO structure
    timeInfo.time = g_time;
    TimeFillInfo(&timeInfo.clockInfo);
    // Marshal TPMS_TIME_INFO to canonical form
    return TPMS_TIME_INFO_Marshal(&timeInfo, (BYTE **)&dataBuffer, NULL);
}
/* 8.10.3.9 TimeFillInfo */
/* This function gathers information to fill in a TPMS_CLOCK_INFO structure. */
void
TimeFillInfo(
	     TPMS_CLOCK_INFO     *clockInfo
	     )
{
    clockInfo->clock = go.clock;
    clockInfo->resetCount = gp.resetCount;
    clockInfo->restartCount = gr.restartCount;
    // If NV is not available, clock stopped advancing and the value reported is
    // not "safe".
    if(NV_IS_AVAILABLE)
	clockInfo->safe = go.clockSafe;
    else
	clockInfo->safe = NO;
    return;
}