githubmirror/libnet

README.win32
247 строк10 KB
Joachim Nilsson
doc: Update AUTHOR section in man pages and fix that COPYRIGHT blurb
10 окт 2019, 18:39
10 окт 2019, 18:390ec98de
Information, Recommendations and Build Instructions for Windows
**************************************************************************

_____________________________ IMPORTANT _____________________________
The execution of the currently shipped msvcbuild.bat batch script will
causes ANY subsequent none-MSVC build to fail. It has been wrongly set
up to copy several MSVC-specific header files from <libnet-root>/win32/
to <libnet-root>/include/ and <libnet-root>/include/libnet/ during the
build process. This is a high priority issue and will be taken care of
ASAP. If you ever have to make use of this file, consider compiling all
other builds from a separate tarball.
_____________________________________________________________________

This file list additional steps and suggestions for Windows users.
Please see INSTALL for a more general overview and doc/PORTED for
other platforms.

Unless you know what you are doing, you should follow the recommendations
below. Notice that there are plenty of other (sometimes better) ways
to build libnet, but these steps and suggestions are known to work.
If the build breaks, please re-read this guide carefully.

Contents
========

1. Introduction
    1.1 Microsoft Visual C++ and GCC/MinGW
    1.2 WinPcap/Npcap
    1.3 Supported Operating Systems

2. MinGW Compiler
    2.1 Native
    2.2 Cross-Compiling

3. Microsoft Visual C++



1. Introduction
===============


1.1 Microsoft Visual C++ and GCC/MinGW
--------------------------------------------------------------

The Microsoft Visual C++ compiler (aka MSVC) and the GCC Windows port
(aka MinGW) are unfortunately not fully compatible. Although MSVC is a
great compiler, libnet has been developed with the GNU toolchain in mind.
So building libnet with the Visual C++ Build Tools will always have its
flaws, even while it might work in some points.

Most of libnet’s development is therefore done with GCC and its MinGW
Windows port.
In other words, if this this all new to you, I recommended you to use
MinGW for building libnet on Windows.


On the other hand, the two can work well together:

If you for instance build libnet with MinGW, and you want to use it
with MSVC too (or vice versa), you can use the DLL and the supplied
"libnet*.def" file located in <libnet-root>/win32/ (this file is always
rebuild at the end of every successful build on windows) to create an
MSVC compatible import library that you can use to link your projects
with without the need of rebuilding libnet again.

To produce a MinGW compatible import library from any libnet DLL:

$ dlltool -D path/to/libnet*.dll -d path/to/libnet*.def -l libnet.dll.a

To produce a MSVC compatible import library from any libnet DLL:

$ lib /machine:X64 /def:example.def (for x64)
or
$ lib /machine:X86 /def:example.def (for x86)

Note 1: If you have removed any or all symbol information from the DLL
(aka "stripped" it), during build, by for example running configure
with "--enable-fast", then this obviously won't work.


1.2 WinPcap/Npcap
-----------------

Currently, the supported method of sending packets under Windows is with
WinPcap (http://www.winpcap.org). However, libnet's support for
Npcap (http://www.npcap.org), an update of WinPcap sponsored by the
Nmap Project, is being seriously considered.
Windows users should know that with the switch to Npcap, WinPcap compatibility
is expected to be deprecated.

Please be sure to install the WinPcap/Npcap driver/DLL and make sure
that the content of the Wpdpack's/Npcap SDK's Include and Lib directories
are somewhat reachable by your compiler.

Note 2: Remember that you cannot use MSVC-generated .lib files to create
shared libraries with MinGW, you have to use the lib*.a files.
WinPcap development came to a standstill before the Developer's Pack ever
provided x64 compatible lib*.a files for use with MinGW/Cygwin. And since
libnet depends on WinPcap, you would have to compile 64-bit lib*.a libraries
yourself if you want to be able to produce 64-bit compatible libnet builds
with MinGW/Cygwin.

Luckily for you, this has been taken care of by me. 64-bit compatible
WinPcap libraries as well as DIY instructions can be found in
<libnet-root>/win32/wpdpack/.

1.3 Supported Operating Systems
-------------------------------

At the latest with the switch to Npcap, libnet support for Windows XP,
Windows Server 2003 and earlier will be dropped.
I can think of too many better things to do than to continuously deal with
error handling and backwards compatibility (msvcrt vs crtdll) for EOL systems.

Remnants in the source suggests that building libnet with Cygwin must have
been possible at some point. This may or may not be the case these days.
If it still works, let me know. If you get it to work (again), let me know.
And if you need to get it to work, let me know.


2. MinGW Compiler
=================

Both native and cross compilation are possible, and there are quite a
few possibilities and options to choose from. If you just want to get
over with it, follow these steps:

Known traps are:
- Setting the wrong (or no) prefix. (important when running 'make install')
- Using incompatible WinPcap libraries for x64 (see Note 2)
- Not having said WinPcap libraries and header files in your compiler's path

Note 3: If you're building with MinGW, and want to install libnet to your
compiler's lib and include directories, you almost always want to set your
prefix manually. If you don't know what that means, run "gcc -v", look for
"--prefix=/some/path" and use that.

Note 4: If you're using a multilib MinGW-w64 GCC compiler, make sure to add
the -m32 or -m64 CFLAGS to instruct the compiler to build for your desired
architecture.


2.1 Native
----------

The recommended MinGW distribution for building libnet is Msys2.
First, follow the installation instructions for Msys2 available at
msys2.github.io. Then, depending on your desired target architecture,
open a mingw32 or mingw64 shell, navigate to the source directory,
and execute the following commands:

1. If you want to produce 32 bit binaries:

$ CFLAGS="-O2 -Wall -I$(pwd)/win32/wpdpack/Include" LDFLAGS="-L$(pwd)/win32/wpdpack/Lib/" ./configure --prefix=/mingw64

If you want to produce 64 bit binaries:

$ CFLAGS="-O2 -Wall -I$(pwd)/win32/wpdpack/Include" LDFLAGS="-L$(pwd)/win32/wpdpack/Lib/x64" ./configure --prefix=/mingw64

2. $ make

3. $ make install (optional)


2.2 Cross-Compiling
-------------------

Note 5: During sample building, you may see a warning similar this:

            Could not determine the host path corresponding to
                        `... a path ...'
            Continuing, but uninstalled executables may not work.

This, among other things, means that the samples will depend on
a shared version of libgcc (aka libgcc_s_sjlj-1.dll). If no shared
version of libgcc was built when the compiler was configured, you
most likely won't be able to execute them.
In that case, your best bet is to link with the static version
of libgcc by disabling shared libraries altogether
(./configure --disable-shared).


In general, you should know what you're doing and what your host, target
and compiler are all about beforehand.
These steps have been successfully tested on Ubuntu and the default
mingw32-w32 toolchain (GCC 4.8).
The recommended steps to build libnet therefore are:

1. If you're targeting x86:
$ CFLAGS="-O2 -Wall -I$(pwd)/win32/wpdpack/Include" LDFLAGS="-L$(pwd)/win32/wpdpack/Lib" ./configure --host=i686-w64-mingw32 --prefix=/usr/i686-w64-mingw32

If you're targeting x64:
$ CFLAGS="-O2 -Wall -I$(pwd)/win32/wpdpack/Include" LDFLAGS="-L$(pwd)/win32/wpdpack/Lib/x64" ./configure --host=x86_64-w64-mingw32 --prefix=/usr/x86_64-w64-mingw32

2. make

3. (optionally) sudo make install

Notice that the --host option is usually all you need for cross-compiling.

Note 6: Although the steps should be very similar, if you're using any
other distribution of MinGW (cross or native), you're pretty much on
your own.  Suggestions, bug reports/fixes, and pull requests, see:
https://github.com/libnet/libnet/issues


3. Microsoft Visual C++
=======================
Known traps are:
- Not using the correct (x86 or x64) version of the Visual Studio command prompt
- Using incompatible WinPcap libraries for x64 (see Note 2)
- Not having said WinPcap libraries and header files in your compiler's path

Until the issue described at the top of this document is completely
resolved, MSVC support should be considered a work in progress and unsafe.
And that’s why I won't even go into it, and instead leave you with these
old but still perfectly fine instructions:



Run msvcbuild.bat to build for Win32 with MSVC
----------------------------------------------

The batch file takes arguments and sets the appropriate path and environment
variables for the desired built by running either vsvars32.bat (for x86),
vcvars64.bat (for x64) or vcvarsall.bat (for Cross development).
Type "msvcbuild.bat help" for a description of all available options.
If no argument is specified, x86 is assumed.

The batch file copies pre-prepared headers out of win32/, avoiding the
requirement for a gnu (Cygwin or MinGW) build environment.

The batch file hard-codes the location of the WinPcap developer's tools.
You may have to modify it for your environment, or install the developer's
pack in the expected location.

Although not required, it is advisable to execute the batch file from a
VS2015 Developer Command Prompt.

For Visual Studio 2015, the shell can be found at:

    Program Files (x86) >> Microsoft Visual Studio 14.0 >> Common7 >> Tools >> VsDevCmd.bat

After building, libnet libraries and .obj files are found in newly created
"<libnet-root>\libnet\src\[Win32|Win64]\" "<libnet-root>\libnet\lib\[x86|x64]\"
respectively.