/
githubmirror
/
libidn2
Обзор
Документация
Войти
/
githubmirror
/
libidn2
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
m4/ax_code_coverage.m4
273 строки
12 KB
Simon Josefsson
maint: Run 'make -f cfg.mk aximport'.
26 фев 2025, 02:10
Не верифицирован
26 фев 2025, 02:10
1cae4a6
Код
Авторство
О чём код?
# =========================================================================== # https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html # =========================================================================== # # SYNOPSIS # # AX_CODE_COVERAGE() # # DESCRIPTION # # Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS, # CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included # in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every # build target (program or library) which should be built with code # coverage support. Also add rules using AX_ADD_AM_MACRO_STATIC; and # $enable_code_coverage which can be used in subsequent configure output. # CODE_COVERAGE_ENABLED is defined and substituted, and corresponds to the # value of the --enable-code-coverage option, which defaults to being # disabled. # # Test also for gcov program and create GCOV variable that could be # substituted. # # Note that all optimization flags in CFLAGS must be disabled when code # coverage is enabled. # # Usage example: # # configure.ac: # # AX_CODE_COVERAGE # # Makefile.am: # # include $(top_srcdir)/aminclude_static.am # # my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ... # my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ... # my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... # my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ... # # clean-local: code-coverage-clean # distclean-local: code-coverage-dist-clean # # This results in a "check-code-coverage" rule being added to any # Makefile.am which do "include $(top_srcdir)/aminclude_static.am" # (assuming the module has been configured with --enable-code-coverage). # Running `make check-code-coverage` in that directory will run the # module's test suite (`make check`) and build a code coverage report # detailing the code which was touched, then print the URI for the report. # # This code was derived from Makefile.decl in GLib, originally licensed # under LGPLv2.1+. # # LICENSE # # Copyright (c) 2012, 2016 Philip Withnall # Copyright (c) 2012 Xan Lopez # Copyright (c) 2012 Christian Persch # Copyright (c) 2012 Paolo Borelli # Copyright (c) 2012 Dan Winship # Copyright (c) 2015,2018 Bastien ROUCARIES # # This library is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or (at # your option) any later version. # # This library is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with this program. If not, see <https://www.gnu.org/licenses/>. #serial 37 m4_define(_AX_CODE_COVERAGE_RULES,[ AX_ADD_AM_MACRO_STATIC([ # Code coverage # # Optional: # - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. # Multiple directories may be specified, separated by whitespace. # (Default: \$(top_builddir)) # - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated # by lcov for code coverage. (Default: # \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info) # - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage # reports to be created. (Default: # \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage) # - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, # set to 0 to disable it and leave empty to stay with the default. # (Default: empty) # - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov # instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov # instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) # - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov # - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the # collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) # - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov # instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) # - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering # lcov instance. (Default: empty) # - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov # instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) # - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the # genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) # - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml # instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) # - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore # # The generated report will be titled using the \$(PACKAGE_NAME) and # \$(PACKAGE_VERSION). In order to add the current git hash to the title, # use the git-version-gen script, available online. # Optional variables # run only on top dir if CODE_COVERAGE_ENABLED ifeq (\$(abs_builddir), \$(abs_top_builddir)) CODE_COVERAGE_DIRECTORY ?= \$(top_builddir) CODE_COVERAGE_OUTPUT_FILE ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage.info CODE_COVERAGE_OUTPUT_DIRECTORY ?= \$(PACKAGE_NAME)-\$(PACKAGE_VERSION)-coverage CODE_COVERAGE_BRANCH_COVERAGE ?= CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc lcov_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_LCOV_SHOPTS ?= \$(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool \"\$(GCOV)\" CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= \$(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) CODE_COVERAGE_LCOV_OPTIONS ?= \$(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= CODE_COVERAGE_LCOV_RMOPTS ?= \$(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ \$(if \$(CODE_COVERAGE_BRANCH_COVERAGE),\ --rc genhtml_branch_coverage=\$(CODE_COVERAGE_BRANCH_COVERAGE)) CODE_COVERAGE_GENHTML_OPTIONS ?= \$(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) CODE_COVERAGE_IGNORE_PATTERN ?= GITIGNOREFILES := \$(GITIGNOREFILES) \$(CODE_COVERAGE_OUTPUT_FILE) \$(CODE_COVERAGE_OUTPUT_DIRECTORY) code_coverage_v_lcov_cap = \$(code_coverage_v_lcov_cap_\$(V)) code_coverage_v_lcov_cap_ = \$(code_coverage_v_lcov_cap_\$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_cap_0 = @echo \" LCOV --capture\" \$(CODE_COVERAGE_OUTPUT_FILE); code_coverage_v_lcov_ign = \$(code_coverage_v_lcov_ign_\$(V)) code_coverage_v_lcov_ign_ = \$(code_coverage_v_lcov_ign_\$(AM_DEFAULT_VERBOSITY)) code_coverage_v_lcov_ign_0 = @echo \" LCOV --remove\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \$(CODE_COVERAGE_IGNORE_PATTERN); code_coverage_v_genhtml = \$(code_coverage_v_genhtml_\$(V)) code_coverage_v_genhtml_ = \$(code_coverage_v_genhtml_\$(AM_DEFAULT_VERBOSITY)) code_coverage_v_genhtml_0 = @echo \" GEN \" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\"; code_coverage_quiet = \$(code_coverage_quiet_\$(V)) code_coverage_quiet_ = \$(code_coverage_quiet_\$(AM_DEFAULT_VERBOSITY)) code_coverage_quiet_0 = --quiet # sanitizes the test-name: replaces with underscores: dashes and dots code_coverage_sanitize = \$(subst -,_,\$(subst .,_,\$(1))) # Use recursive makes in order to ignore errors during check check-code-coverage: -\$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) -k check \$(AM_V_at)\$(MAKE) \$(AM_MAKEFLAGS) code-coverage-capture # Capture code coverage data code-coverage-capture: code-coverage-capture-hook \$(code_coverage_v_lcov_cap)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --capture --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" --test-name \"\$(call code_coverage_sanitize,\$(PACKAGE_NAME)-\$(PACKAGE_VERSION))\" --no-checksum --compat-libtool \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_OPTIONS) \$(code_coverage_v_lcov_ign)\$(LCOV) \$(code_coverage_quiet) \$(addprefix --directory ,\$(CODE_COVERAGE_DIRECTORY)) --remove \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \$(CODE_COVERAGE_IGNORE_PATTERN) --output-file \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_LCOV_SHOPTS) \$(CODE_COVERAGE_LCOV_RMOPTS) -@rm -f \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \$(code_coverage_v_genhtml)LANG=C \$(GENHTML) \$(code_coverage_quiet) \$(addprefix --prefix ,\$(CODE_COVERAGE_DIRECTORY)) --output-directory \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" --title \"\$(PACKAGE_NAME)-\$(PACKAGE_VERSION) Code Coverage\" --legend --show-details \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \$(CODE_COVERAGE_GENHTML_OPTIONS) @echo \"file://\$(abs_builddir)/\$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html\" code-coverage-clean: -\$(LCOV) --directory \$(top_builddir) -z -rm -rf \"\$(CODE_COVERAGE_OUTPUT_FILE)\" \"\$(CODE_COVERAGE_OUTPUT_FILE).tmp\" \"\$(CODE_COVERAGE_OUTPUT_DIRECTORY)\" -find . \\( -name \"*.gcda\" -o -name \"*.gcno\" -o -name \"*.gcov\" \\) -delete code-coverage-dist-clean: A][M_DISTCHECK_CONFIGURE_FLAGS := \$(A][M_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage else # ifneq (\$(abs_builddir), \$(abs_top_builddir)) check-code-coverage: code-coverage-capture: code-coverage-capture-hook code-coverage-clean: code-coverage-dist-clean: endif # ifeq (\$(abs_builddir), \$(abs_top_builddir)) else #! CODE_COVERAGE_ENABLED # Use recursive makes in order to ignore errors during check check-code-coverage: @echo \"Need to reconfigure with --enable-code-coverage\" # Capture code coverage data code-coverage-capture: code-coverage-capture-hook @echo \"Need to reconfigure with --enable-code-coverage\" code-coverage-clean: code-coverage-dist-clean: endif #CODE_COVERAGE_ENABLED # Hook rule executed before code-coverage-capture, overridable by the user code-coverage-capture-hook: .PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook ]) ]) AC_DEFUN([_AX_CODE_COVERAGE_ENABLED],[ AX_CHECK_GNU_MAKE([],[AC_MSG_ERROR([not using GNU make that is needed for coverage])]) AC_REQUIRE([AX_ADD_AM_MACRO_STATIC]) # check for gcov AC_CHECK_TOOL([GCOV], [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], [:]) AS_IF([test "X$GCOV" = "X:"], [AC_MSG_ERROR([gcov is needed to do coverage])]) AC_SUBST([GCOV]) dnl Check if gcc is being used AS_IF([ test "$GCC" = "no" ], [ AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) ]) AC_CHECK_PROG([LCOV], [lcov], [lcov]) AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) AS_IF([ test x"$LCOV" = x ], [ AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed]) ]) AS_IF([ test x"$GENHTML" = x ], [ AC_MSG_ERROR([Could not find genhtml from the lcov package]) ]) AC_CHECK_LIB([gcov], [_gcov_init], [CODE_COVERAGE_LIBS="-lgcov"], [CODE_COVERAGE_LIBS=""]) dnl Build the code coverage flags dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility CODE_COVERAGE_CPPFLAGS="-DNDEBUG" CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" AC_SUBST([CODE_COVERAGE_CPPFLAGS]) AC_SUBST([CODE_COVERAGE_CFLAGS]) AC_SUBST([CODE_COVERAGE_CXXFLAGS]) AC_SUBST([CODE_COVERAGE_LIBS]) ]) AC_DEFUN([AX_CODE_COVERAGE],[ dnl Check for --enable-code-coverage # allow to override gcov location AC_ARG_WITH([gcov], [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) AC_MSG_CHECKING([whether to build with code coverage support]) AC_ARG_ENABLE([code-coverage], AS_HELP_STRING([--enable-code-coverage], [Whether to enable code coverage support]),, enable_code_coverage=no) AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test "x$enable_code_coverage" = xyes]) AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) AC_MSG_RESULT($enable_code_coverage) AS_IF([ test "x$enable_code_coverage" = xyes ], [ _AX_CODE_COVERAGE_ENABLED ]) _AX_CODE_COVERAGE_RULES ])