test/cmd/apply.sh - master - githubmirror/kubernetes

test/cmd/apply.sh
689 строк32 KB
David Eads
add --subresource to kubectl apply
02 окт 2024, 20:28
02 окт 2024, 20:2855ba8b2
#!/usr/bin/env bash

# Copyright 2018 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

set -o errexit
set -o nounset
set -o pipefail

# Runs tests related to kubectl apply.
run_kubectl_apply_tests() {
  set -o nounset
  set -o errexit

  create_and_use_new_namespace
  kube::log::status "Testing kubectl apply"
  ## kubectl apply should create the resource that doesn't exist yet
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Command: apply a pod "test-pod" (doesn't exist) should create this pod
  kubectl apply -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" is created
  kube::test::get_object_assert 'pods test-pod' "{{${labels_field:?}.name}}" 'test-pod-label'
  # Post-Condition: pod "test-pod" has configuration annotation
  grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")"
  # pod has field manager for kubectl client-side apply
  output_message=$(kubectl get --show-managed-fields -f hack/testdata/pod.yaml -o=jsonpath='{.metadata.managedFields[*].manager}' "${kube_flags[@]:?}" 2>&1)
  kube::test::if_has_string "${output_message}" 'kubectl-client-side-apply'
  # Clean up
  kubectl delete pods test-pod "${kube_flags[@]:?}"

  ### set-last-applied
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Command: create "test-pod" (doesn't exist) should create this pod without last-applied annotation
  kubectl create -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" is created
  kube::test::get_object_assert 'pods test-pod' "{{${labels_field:?}.name}}" 'test-pod-label'
  # Pre-Condition: pod "test-pod" does not have configuration annotation
  ! grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")" || exit 1
  # Dry-run set-last-applied
  kubectl apply set-last-applied --dry-run=client -f hack/testdata/pod.yaml --create-annotation=true "${kube_flags[@]:?}"
  kubectl apply set-last-applied --dry-run=server -f hack/testdata/pod.yaml --create-annotation=true "${kube_flags[@]:?}"
  ! grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")" || exit 1
  # Command
  kubectl apply set-last-applied -f hack/testdata/pod.yaml --create-annotation=true "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" has configuration annotation
  grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")"
  # Clean up
  kubectl delete pods test-pod "${kube_flags[@]:?}"

  ## kubectl apply should be able to clear defaulted fields.
  # Pre-Condition: no deployment exists
  kube::test::get_object_assert deployments "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Command: apply a deployment "test-deployment-retainkeys" (doesn't exist) should create this deployment
  kubectl apply -f hack/testdata/retainKeys/deployment/deployment-before.yaml "${kube_flags[@]:?}"
  # Post-Condition: deployment "test-deployment-retainkeys" created
  kube::test::get_object_assert deployments "{{range.items}}{{${id_field:?}}}{{end}}" 'test-deployment-retainkeys'
  # Post-Condition: deployment "test-deployment-retainkeys" has defaulted fields
  grep -q RollingUpdate <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  grep -q maxSurge <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  grep -q maxUnavailable <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  grep -q emptyDir <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  # Command: apply a deployment "test-deployment-retainkeys" should clear
  # defaulted fields and successfully update the deployment
  [[ "$(kubectl apply -f hack/testdata/retainKeys/deployment/deployment-after.yaml "${kube_flags[@]:?}")" ]]
  # Post-Condition: deployment "test-deployment-retainkeys" has updated fields
  grep -q Recreate <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  ! grep -q RollingUpdate <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")" || exit 1
  grep -q hostPath <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")"
  ! grep -q emptyDir <<< "$(kubectl get deployments test-deployment-retainkeys -o yaml "${kube_flags[@]:?}")" || exit 1
  # Clean up
  kubectl delete deployments test-deployment-retainkeys "${kube_flags[@]:?}"

  ## kubectl apply -f with label selector should only apply matching objects
  # Pre-Condition: no POD exists
  kube::test::wait_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply
  kubectl apply -l unique-label=bingbang -f hack/testdata/filter "${kube_flags[@]:?}"
  # check right pod exists
  kube::test::get_object_assert 'pods selector-test-pod' "{{${labels_field:?}.name}}" 'selector-test-pod'
  # check wrong pod doesn't exist
  output_message=$(! kubectl get pods selector-test-pod-dont-apply 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'pods "selector-test-pod-dont-apply" not found'
  # cleanup
  kubectl delete pods selector-test-pod

  # Create a deployment
  kubectl apply -f hack/testdata/null-propagation/deployment-null.yml "${kube_flags[@]:?}"
  # resources.limits.cpu should be nil.
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].resources.requests.cpu}" ''
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].resources.requests.memory}" '64Mi'
  # The default value of the terminationMessagePolicy field is `File`, so the result will not be changed.
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].terminationMessagePolicy}" 'File'

  # kubectl apply on create should do what kubectl apply on update will accomplish.
  kubectl apply -f hack/testdata/null-propagation/deployment-null.yml "${kube_flags[@]}"
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].resources.requests.cpu}" ''
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].resources.requests.memory}" '64Mi'
  kube::test::get_object_jsonpath_assert "deployment/my-dep-null" "{.spec.template.spec.containers[0].terminationMessagePolicy}" 'File'

  # hard.limits.cpu should be nil.
  kubectl apply -f hack/testdata/null-propagation/resourcesquota-null.yml "${kube_flags[@]}"
  kube::test::get_object_jsonpath_assert  "resourcequota/my-rq" "{.spec.hard['limits\.cpu']}" ''
  kube::test::get_object_jsonpath_assert  "resourcequota/my-rq" "{.spec.hard['limits\.memory']}" ''

  # kubectl apply on create should do what kubectl apply on update will accomplish.
  kubectl apply -f hack/testdata/null-propagation/resourcesquota-null.yml "${kube_flags[@]}"
  kube::test::get_object_jsonpath_assert "resourcequota/my-rq" "{.spec.hard['limits\.cpu']}" ''
  kube::test::get_object_jsonpath_assert  "resourcequota/my-rq" "{.spec.hard['limits\.memory']}" ''

  # cleanup
  kubectl delete deployment my-dep-null
  kubectl delete resourcequota my-rq

  ## kubectl apply --dry-run=server
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  # apply dry-run
  kubectl apply --dry-run=client -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  kubectl apply --dry-run=server -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # No pod exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply non dry-run creates the pod
  kubectl apply -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  initialResourceVersion=$(kubectl get "${kube_flags[@]:?}" -f hack/testdata/pod.yaml -o go-template='{{ .metadata.resourceVersion }}')
  # apply changes
  kubectl apply --dry-run=client -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}"
  kubectl apply --dry-run=server -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}"
  # Post-Condition: label still has initial value
  kube::test::get_object_assert 'pods test-pod' "{{${labels_field:?}.name}}" 'test-pod-label'
  # Ensure dry-run doesn't persist change
  resourceVersion=$(kubectl get "${kube_flags[@]:?}" -f hack/testdata/pod.yaml -o go-template='{{ .metadata.resourceVersion }}')
  kube::test::if_has_string "${resourceVersion}" "${initialResourceVersion}"

  # clean-up
  kubectl delete -f hack/testdata/pod.yaml "${kube_flags[@]:?}"

  ## kubectl apply dry-run on CR
  # Create CRD
  kubectl "${kube_flags_with_token[@]:?}" create -f - << __EOF__
{
  "kind": "CustomResourceDefinition",
  "apiVersion": "apiextensions.k8s.io/v1",
  "metadata": {
    "name": "resources.mygroup.example.com"
  },
  "spec": {
    "group": "mygroup.example.com",
    "scope": "Namespaced",
    "names": {
      "plural": "resources",
      "singular": "resource",
      "kind": "Kind",
      "listKind": "KindList"
    },
    "versions": [
      {
        "name": "v1alpha1",
        "served": true,
        "storage": true,
        "schema": {
          "openAPIV3Schema": {
            "x-kubernetes-preserve-unknown-fields": true,
            "type": "object"
          }
        }
      }
    ]
  }
}
__EOF__

  # Ensure the API server has recognized and started serving the associated CR API
  local tries=5
  for i in $(seq 1 $tries); do
      local output
      output=$(kubectl "${kube_flags[@]:?}" api-resources --api-group mygroup.example.com -oname || true)
      if kube::test::if_has_string "$output" resources.mygroup.example.com; then
          break
      fi
      echo "${i}: Waiting for CR API to be available"
      sleep "$i"
  done

  # Dry-run create the CR
  kubectl "${kube_flags[@]:?}" apply --dry-run=server -f hack/testdata/CRD/resource.yaml "${kube_flags[@]:?}"
  # Make sure that the CR doesn't exist
  ! kubectl "${kube_flags[@]:?}" get resource/myobj 2>/dev/null || exit 1

  # clean-up
  kubectl "${kube_flags[@]:?}" delete customresourcedefinition resources.mygroup.example.com

  ## kubectl apply --prune
  # Pre-Condition: namespace nsb exists; no POD exists
  kubectl create ns nsb
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply a into namespace nsb
  kubectl apply --namespace nsb -l prune-group=true -f hack/testdata/prune/a.yaml "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pods a -n nsb' "{{${id_field:?}}}" 'a'
  # apply b with namespace
  kubectl apply --namespace nsb --prune -l prune-group=true -f hack/testdata/prune/b.yaml "${kube_flags[@]:?}"
  # check right pod exists and wrong pod doesn't exist
  kube::test::wait_object_assert 'pods -n nsb' "{{range.items}}{{${id_field:?}}}:{{end}}" 'b:'

  # cleanup
  kubectl delete pods b -n nsb

  # same thing without prune for a sanity check
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  # apply a
  kubectl apply -l prune-group=true -f hack/testdata/prune/a.yaml "${kube_flags[@]:?}"
  # check right pod exists
  kube::test::get_object_assert 'pods a' "{{${id_field:?}}}" 'a'
  # check wrong pod doesn't exist
  kube::test::wait_object_assert 'pods -n nsb' "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  # apply b
  kubectl apply -l prune-group=true -f hack/testdata/prune/b.yaml "${kube_flags[@]:?}"
  # check both pods exist
  kube::test::get_object_assert 'pods a' "{{${id_field:?}}}" 'a'
  kube::test::get_object_assert 'pods b -n nsb' "{{${id_field:?}}}" 'b'

  # cleanup
  kubectl delete pod/a
  kubectl delete pod/b -n nsb

  ## kubectl apply --prune requires a --all flag to select everything
  output_message=$(! kubectl apply --prune -f hack/testdata/prune 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" \
    'all resources selected for prune without explicitly passing --all'
  # should apply everything
  kubectl apply --all --prune -f hack/testdata/prune
  kube::test::get_object_assert 'pods a' "{{${id_field:?}}}" 'a'
  kube::test::get_object_assert 'pods b -n nsb' "{{${id_field:?}}}" 'b'
  kubectl delete pod/a
  kubectl delete pod/b -n nsb
  kubectl delete ns nsb

  ## kubectl apply --prune should fallback to delete for non reapable types
  kubectl apply --all --prune -f hack/testdata/prune-reap/a.yml 2>&1 "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pvc a-pvc' "{{${id_field:?}}}" 'a-pvc'
  kubectl apply --all --prune -f hack/testdata/prune-reap/b.yml 2>&1 "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pvc b-pvc' "{{${id_field:?}}}" 'b-pvc'
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  kubectl delete pvc b-pvc 2>&1 "${kube_flags[@]:?}"

  ## kubectl apply --prune --prune-allowlist
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply pod a
  kubectl apply --prune -l prune-group=true -f hack/testdata/prune/a.yaml "${kube_flags[@]:?}"
  # check right pod exists
  kube::test::get_object_assert 'pods a' "{{${id_field:?}}}" 'a'
  # apply svc and don't prune pod a by overwriting allowlist
  kubectl apply --prune -l prune-group=true -f hack/testdata/prune/svc.yaml --prune-allowlist core/v1/Service 2>&1 "${kube_flags[@]:?}"
  kube::test::get_object_assert 'service prune-svc' "{{${id_field:?}}}" 'prune-svc'
  kube::test::get_object_assert 'pods a' "{{${id_field:?}}}" 'a'
  # apply svc and prune pod a with default allowlist
  kubectl apply --prune -l prune-group=true -f hack/testdata/prune/svc.yaml 2>&1 "${kube_flags[@]:?}"
  kube::test::get_object_assert 'service prune-svc' "{{${id_field:?}}}" 'prune-svc'
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # cleanup
  kubectl delete svc prune-svc 2>&1 "${kube_flags[@]:?}"

  ## kubectl apply --prune can prune resources not in the defaulted namespace
  # Pre-Condition: namespace nsb exists; no POD exists
  kubectl create ns nsb
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply a into namespace nsb
  kubectl apply --namespace nsb -f hack/testdata/prune/a.yaml "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pods a -n nsb' "{{${id_field:?}}}" 'a'
  # apply b with namespace
  kubectl apply --namespace nsb -f hack/testdata/prune/b.yaml "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pods b -n nsb' "{{${id_field:?}}}" 'b'
  # apply --prune must prune a
  kubectl apply --prune --all -f hack/testdata/prune/b.yaml
  # check wrong pod doesn't exist and right pod exists
  kube::test::wait_object_assert 'pods -n nsb' "{{range.items}}{{${id_field:?}}}:{{end}}" 'b:'

  # cleanup
  kubectl delete ns nsb

  ## kubectl apply -n must fail if input file contains namespace other than the one given in -n
  output_message=$(! kubectl apply -n foo -f hack/testdata/prune/b.yaml 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'the namespace from the provided object "nsb" does not match the namespace "foo".'

  ## kubectl apply -f some.yml --force
  # Pre-condition: no service exists
  kube::test::get_object_assert services "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply service a
  kubectl apply -f hack/testdata/service-revision1.yaml "${kube_flags[@]:?}"
  # check right service exists
  kube::test::get_object_assert 'services a' "{{${id_field:?}}}" 'a'
  # change immutable field and apply service a
  output_message=$(! kubectl apply -f hack/testdata/service-revision2.yaml 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'may not change once set'
  # apply --force to recreate resources for immutable fields
  kubectl apply -f hack/testdata/service-revision2.yaml --force "${kube_flags[@]:?}"
  # check immutable field exists
  kube::test::get_object_assert 'services a' "{{.spec.clusterIP}}" '10.0.0.12'
  # cleanup
  kubectl delete -f hack/testdata/service-revision2.yaml "${kube_flags[@]:?}"

  ## kubectl apply -k somedir
  kubectl apply -k hack/testdata/kustomize
  kube::test::get_object_assert 'configmap test-the-map' "{{${id_field}}}" 'test-the-map'
  kube::test::get_object_assert 'deployment test-the-deployment' "{{${id_field}}}" 'test-the-deployment'
  kube::test::get_object_assert 'service test-the-service' "{{${id_field}}}" 'test-the-service'
  # cleanup
  kubectl delete -k hack/testdata/kustomize

  ## kubectl apply --kustomize somedir
  kubectl apply --kustomize hack/testdata/kustomize
  kube::test::get_object_assert 'configmap test-the-map' "{{${id_field}}}" 'test-the-map'
  kube::test::get_object_assert 'deployment test-the-deployment' "{{${id_field}}}" 'test-the-deployment'
  kube::test::get_object_assert 'service test-the-service' "{{${id_field}}}" 'test-the-service'
  # cleanup
  kubectl delete --kustomize hack/testdata/kustomize

  ## kubectl apply multiple resources with one failure during apply phase.
  # Pre-Condition: namespace does not exist and no POD exists
  output_message=$(! kubectl get namespace multi-resource-ns 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'namespaces "multi-resource-ns" not found'
  kube::test::wait_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # First pass, namespace is created, but pod is not (since namespace does not exist yet).
  output_message=$(! kubectl apply -f hack/testdata/multi-resource-1.yaml 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'namespaces "multi-resource-ns" not found'
  output_message=$(! kubectl get pods test-pod -n multi-resource-ns 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'pods "test-pod" not found'
  # Second pass, pod is created (now that namespace exists).
  kubectl apply -f hack/testdata/multi-resource-1.yaml "${kube_flags[@]:?}"
  kube::test::get_object_assert 'pods test-pod -n multi-resource-ns' "{{${id_field}}}" 'test-pod'
  # cleanup
  kubectl delete -f hack/testdata/multi-resource-1.yaml "${kube_flags[@]:?}"

  ## kubectl apply multiple resources with one failure during builder phase.
  # Pre-Condition: No configmaps with name=foo
  kube::test::get_object_assert 'configmaps --field-selector=metadata.name=foo' "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Apply a configmap and a bogus custom resource.
  output_message=$(! kubectl apply -f hack/testdata/multi-resource-2.yaml 2>&1 "${kube_flags[@]:?}")
  # Should be error message from bogus custom resource.
  kube::test::if_has_string "${output_message}" 'no matches for kind "Bogus" in version "example.com/v1"'
  # ConfigMap should have been created even with custom resource error.
  kube::test::get_object_assert 'configmaps foo' "{{${id_field}}}" 'foo'
  # cleanup
  kubectl delete configmaps foo "${kube_flags[@]:?}"

  ## kubectl apply multiple resources with one failure during builder phase.
  # Pre-Condition: No pods exist.
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Applies three pods, one of which is invalid (POD-B), two succeed (pod-a, pod-c).
  output_message=$(! kubectl apply -f hack/testdata/multi-resource-3.yaml 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'The Pod "POD-B" is invalid'
  kube::test::get_object_assert 'pods pod-a' "{{${id_field}}}" 'pod-a'
  kube::test::get_object_assert 'pods pod-c' "{{${id_field}}}" 'pod-c'
  # cleanup
  kubectl delete pod pod-a pod-c "${kube_flags[@]:?}"
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  ## kubectl apply multiple resources with one failure during apply phase.
  # Pre-Condition: crd does not exist, and custom resource does not exist.
  kube::test::get_object_assert crds "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # First pass, custom resource fails, but crd apply succeeds.
  output_message=$(! kubectl apply -f hack/testdata/multi-resource-4.yaml 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'no matches for kind "Widget" in version "example.com/v1"'
  kubectl wait --timeout=2s --for=condition=Established=true crd/widgets.example.com
  output_message=$(! kubectl get widgets foo 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" 'widgets.example.com "foo" not found'
  kube::test::get_object_assert 'crds widgets.example.com' "{{${id_field}}}" 'widgets.example.com'
  # Second pass, custom resource is created (now that crd exists).
  kubectl apply -f hack/testdata/multi-resource-4.yaml "${kube_flags[@]:?}"
  kube::test::get_object_assert 'widget foo' "{{${id_field}}}" 'foo'
  # cleanup
  kubectl delete -f hack/testdata/multi-resource-4.yaml "${kube_flags[@]:?}"

  set +o nounset
  set +o errexit
}

# Runs tests related to kubectl apply (server-side)
run_kubectl_server_side_apply_tests() {
  set -o nounset
  set -o errexit

  create_and_use_new_namespace
  kube::log::status "Testing kubectl apply --server-side"
  ## kubectl apply should create the resource that doesn't exist yet
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # Command: apply a pod "test-pod" (doesn't exist) should create this pod
  kubectl apply --server-side -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" is created
  kube::test::get_object_assert 'pods test-pod' "{{${labels_field:?}.name}}" 'test-pod-label'
  # pod has field manager for kubectl server-side apply
  output_message=$(kubectl get --show-managed-fields -f hack/testdata/pod.yaml -o=jsonpath='{.metadata.managedFields[*].manager}' "${kube_flags[@]:?}" 2>&1)
  kube::test::if_has_string "${output_message}" 'kubectl'
  # pod has custom field manager
  kubectl apply --server-side --field-manager=my-field-manager --force-conflicts -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  output_message=$(kubectl get -f hack/testdata/pod.yaml -o=jsonpath='{.metadata.managedFields[*].manager}' "${kube_flags[@]:?}" 2>&1)
  kube::test::if_has_string "${output_message}" 'my-field-manager'
  # can add pod condition
  kubectl apply --server-side --subresource=status --field-manager=my-field-manager -f hack/testdata/pod-apply-status.yaml "${kube_flags[@]:?}"
  output_message=$(kubectl get -f hack/testdata/pod.yaml -o=jsonpath='{.status.conditions[*].type}' "${kube_flags[@]:?}" 2>&1)
  kube::test::if_has_string "${output_message}" 'example.io/Foo'
  # Clean up
  kubectl delete pods test-pod "${kube_flags[@]:?}"

  ## kubectl apply --dry-run=server
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  # apply dry-run
  kubectl apply --server-side --dry-run=server -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # No pod exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''
  # apply non dry-run creates the pod
  kubectl apply --server-side -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  initialResourceVersion=$(kubectl get "${kube_flags[@]:?}" -f hack/testdata/pod.yaml -o go-template='{{ .metadata.resourceVersion }}')
  # apply changes
  kubectl apply --server-side --dry-run=server -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}"
  # Post-Condition: label still has initial value
  kube::test::get_object_assert 'pods test-pod' "{{${labels_field:?}.name}}" 'test-pod-label'
  # Ensure dry-run doesn't persist change
  resourceVersion=$(kubectl get "${kube_flags[@]:?}" -f hack/testdata/pod.yaml -o go-template='{{ .metadata.resourceVersion }}')
  kube::test::if_has_string "${resourceVersion}" "${initialResourceVersion}"

  # clean-up
  kubectl delete -f hack/testdata/pod.yaml "${kube_flags[@]:?}"

  ## kubectl apply upgrade
  # Pre-Condition: no POD exists
  kube::test::get_object_assert pods "{{range.items}}{{${id_field:?}}}:{{end}}" ''

  kube::log::status "Testing upgrade kubectl client-side apply to server-side apply"
  # run client-side apply
  kubectl apply -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # test upgrade does not work with non-standard server-side apply field manager
  ! kubectl apply --server-side --field-manager="not-kubectl" -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}" || exit 1
  # test upgrade from client-side apply to server-side apply
  kubectl apply --server-side -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" has configuration annotation
  grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")"
  output_message=$(kubectl apply view-last-applied pod/test-pod -o json 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" '"name": "test-pod-applied"'

  kube::log::status "Testing downgrade kubectl server-side apply to client-side apply"
  # test downgrade from server-side apply to client-side apply
  kubectl apply --server-side -f hack/testdata/pod.yaml "${kube_flags[@]:?}"
  # Post-Condition: pod "test-pod" has configuration annotation
  grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get pods test-pod -o yaml "${kube_flags[@]:?}")"
  output_message=$(kubectl apply view-last-applied pod/test-pod -o json 2>&1 "${kube_flags[@]:?}")
  kube::test::if_has_string "${output_message}" '"name": "test-pod-label"'
  kubectl apply -f hack/testdata/pod-apply.yaml "${kube_flags[@]:?}"

  # clean-up
  kubectl delete -f hack/testdata/pod.yaml "${kube_flags[@]:?}"

  # Test apply migration

  # Create a configmap in the cluster with client-side apply:
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side=false -f - << __EOF__
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
data:
  key: value
  legacy: unused
__EOF__
  )

  kube::test::if_has_string "${output_message}" 'configmap/test created'

  # Apply the same manifest with --server-side flag, as per server-side-apply migration instructions:
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side -f - << __EOF__
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
data:
  key: value
  legacy: unused
__EOF__
  )

  kube::test::if_has_string "${output_message}" 'configmap/test serverside-applied'

  # Apply the object a third time using server-side-apply, but this time removing
  # a field and adding a field. Old versions of kubectl would not allow the field 
  # to be removed
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side -f - << __EOF__
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
data:
  key: value
  ssaKey: ssaValue
__EOF__
  )

  kube::test::if_has_string "${output_message}" 'configmap/test serverside-applied'

  # Fetch the object and check to see that it does not have a field 'legacy'
  kube::test::get_object_assert "configmap test" "{{ .data.key }}" 'value'
  kube::test::get_object_assert "configmap test" "{{ .data.legacy }}" '<no value>'
  kube::test::get_object_assert "configmap test" "{{ .data.ssaKey }}" 'ssaValue'

  # CSA the object after it has been server-side-applied and had a field removed
  # Add new key with client-side-apply. Also removes the field from server-side-apply
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side=false -f - << __EOF__
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
data:
  key: value
  newKey: newValue
__EOF__
  )

  kube::test::get_object_assert "configmap test" "{{ .data.key }}" 'value'
  kube::test::get_object_assert "configmap test" "{{ .data.newKey }}" 'newValue'
  kube::test::get_object_assert "configmap test" "{{ .data.ssaKey }}" '<no value>'

  # SSA the object without the field added above by CSA. Show that the object
  # on the server has had the field removed
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side -f - << __EOF__
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
data:
  key: value
  ssaKey: ssaValue
__EOF__
  )

  # Fetch the object and check to see that it does not have a field 'newKey'
  kube::test::get_object_assert "configmap test" "{{ .data.key }}" 'value'
  kube::test::get_object_assert "configmap test" "{{ .data.newKey }}" '<no value>'
  kube::test::get_object_assert "configmap test" "{{ .data.ssaKey }}" 'ssaValue'

  # Show that kubectl diff --server-side also functions after a migration
  output_message=$(kubectl diff "${kube_flags[@]:?}" --server-side -f - << __EOF__ || test $? -eq 1
apiVersion: v1
kind: ConfigMap
metadata:
  name: test
  annotations:
    newAnnotation: newValue
data:
  key: value
  newKey: newValue
__EOF__
)
  kube::test::if_has_string "${output_message}" '+  newKey: newValue'
  kube::test::if_has_string "${output_message}" '+    newAnnotation: newValue'

  # clean-up
  kubectl "${kube_flags[@]:?}" delete configmap test

  ## Test to show that supplying a custom field manager to kubectl apply
  # does not prevent migration from client-side-apply to server-side-apply
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side=false --field-manager=myfm  -f - << __EOF__
apiVersion: v1
data:
 key: value1
 legacy: value2
kind: ConfigMap
metadata:
 name: ssa-test
__EOF__
)
  kube::test::if_has_string "$output_message" "configmap/ssa-test created"
  kube::test::get_object_assert "configmap ssa-test" "{{ .data.key }}" 'value1'

  # show that after client-side applying with a custom field manager, the
  # last-applied-annotation is present
  grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get configmap ssa-test -o yaml "${kube_flags[@]:?}")"

  # Migrate to server-side-apply by applying the same object
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side=true --field-manager=myfm  -f - << __EOF__
apiVersion: v1
data:
 key: value1
 legacy: value2
kind: ConfigMap
metadata:
 name: ssa-test
__EOF__
)
  kube::test::if_has_string "$output_message" "configmap/ssa-test serverside-applied"
  kube::test::get_object_assert "configmap ssa-test" "{{ .data.key }}" 'value1'

  # show that after migrating to SSA with a custom field manager, the 
  # last-applied-annotation is dropped
  ! grep -q kubectl.kubernetes.io/last-applied-configuration <<< "$(kubectl get configmap ssa-test -o yaml "${kube_flags[@]:?}")" || exit 1

  # Change a field without having any conflict and also drop a field in the same patch
  output_message=$(kubectl "${kube_flags[@]:?}" apply --server-side=true --field-manager=myfm  -f - << __EOF__
apiVersion: v1
data:
 key: value2
kind: ConfigMap
metadata:
 name: ssa-test
__EOF__
)
  kube::test::if_has_string "$output_message" "configmap/ssa-test serverside-applied"
  kube::test::get_object_assert "configmap ssa-test" "{{ .data.key }}" 'value2'
  kube::test::get_object_assert "configmap ssa-test" "{{ .data.legacy }}" '<no value>'

  # Clean up
  kubectl delete configmap ssa-test

  ## kubectl apply dry-run on CR
  # Create CRD
  kubectl "${kube_flags_with_token[@]}" create -f - << __EOF__
{
  "kind": "CustomResourceDefinition",
  "apiVersion": "apiextensions.k8s.io/v1",
  "metadata": {
    "name": "resources.mygroup.example.com"
  },
  "spec": {
    "group": "mygroup.example.com",
    "scope": "Namespaced",
    "names": {
      "plural": "resources",
      "singular": "resource",
      "kind": "Kind",
      "listKind": "KindList"
    },
    "versions": [
      {
        "name": "v1alpha1",
        "served": true,
        "storage": true,
        "schema": {
          "openAPIV3Schema": {
            "x-kubernetes-preserve-unknown-fields": true,
            "type": "object"
          }
        }
      }
    ]
  }
}
__EOF__

  # Ensure the API server has recognized and started serving the associated CR API
  local tries=5
  for i in $(seq 1 $tries); do
      local output
      output=$(kubectl "${kube_flags[@]:?}" api-resources --api-group mygroup.example.com -oname || true)
      if kube::test::if_has_string "$output" resources.mygroup.example.com; then
          break
      fi
      echo "${i}: Waiting for CR API to be available"
      sleep "$i"
  done

  # Dry-run create the CR
  kubectl "${kube_flags[@]:?}" apply --server-side --dry-run=server -f hack/testdata/CRD/resource.yaml "${kube_flags[@]:?}"
  # Make sure that the CR doesn't exist
  ! kubectl "${kube_flags[@]:?}" get resource/myobj 2>/dev/null || exit 1

  # clean-up
  kubectl "${kube_flags[@]:?}" delete customresourcedefinition resources.mygroup.example.com

  set +o nounset
  set +o errexit
}