/
githubmirror
/
keyutils
Обзор
Документация
Войти
/
githubmirror
/
keyutils
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v0.1
keyctl.1
529 строк
14 KB
David Howells
keyutils historical version 0.1
22 фев 2010, 18:37
22 фев 2010, 18:37
5291796
Код
Авторство
О чём код?
.\" .\" Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. .\" Written by David Howells (dhowells@redhat.com) .\" .\" This program is free software; you can redistribute it and/or .\" modify it under the terms of the GNU General Public License .\" as published by the Free Software Foundation; either version .\" 2 of the License, or (at your option) any later version. .\" .TH KEYCTL 1 "11 July 2005" Linux "Linux Key Management Utilities" .SH NAME keyctl - Key management facility control .SH SYNOPSIS \fBkeyctl\fR show .br \fBkeyctl\fR add <type> <desc> <data> <keyring> .br \fBkeyctl\fR request <type> <desc> [<dest_keyring>] .br \fBkeyctl\fR request2 <type> <desc> <info> [<dest_keyring>] .br \fBkeyctl\fR update <key> <data> .br \fBkeyctl\fR newring <name> <keyring> .br \fBkeyctl\fR revoke <key> .br \fBkeyctl\fR clear <keyring> .br \fBkeyctl\fR link <key> <keyring> .br \fBkeyctl\fR unlink <key> <keyring> .br \fBkeyctl\fR search <keyring> <type> <desc> [<dest_keyring>] .br \fBkeyctl\fR read <key> .br \fBkeyctl\fR pipe <key> .br \fBkeyctl\fR print <key> .br \fBkeyctl\fR list <keyring> .br \fBkeyctl\fR rlist <keyring> .br \fBkeyctl\fR describe <keyring> .br \fBkeyctl\fR rdescribe <keyring> [sep] .br \fBkeyctl\fR chown <key> <uid> .br \fBkeyctl\fR chgrp <key> <gid> .br \fBkeyctl\fR setperm <key> <mask> .br \fBkeyctl\fR session .br \fBkeyctl\fR session - [<prog> <arg1> <arg2> ...] .br \fBkeyctl\fR session <name> [<prog> <arg1> <arg2> ...] .br \fBkeyctl\fR instantiate <key> <data> <keyring> .br \fBkeyctl\fR negate <key> <timeout> <keyring> .SH DESCRIPTION This program is used to control the key management facility in various ways using a variety of subcommands. .SH KEY IDENTIFIERS .P The key identifiers passed to or returned from keyctl are, in general, positive integers. There are, however, some special values with special meanings that can be passed as arguments: .P (*) No key: \fB0\fR .P (*) Thread keyring: \fB@t\fR or \fB-1\fR .P Each thread may have its own keyring. This is searched first, before all others. The thread keyring is replaced by (v)fork, exec and clone. .P (*) Process keyring: \fB@p\fR or \fB-2\fR .P Each process (thread group) may have its own keyring. This is shared between all members of a group and will be searched after the thread keyring. The process keyring is replaced by (v)fork and exec. .P (*) Session keyring: \fB@s\fR or \fB-3\fR .P Each process subscribes to a session keyring that is inherited across (v)fork, exec and clone. This is searched after the process keyring. Session keyrings can be named and an extant keyring can be joined in place of a process's current session keyring. .P (*) User specific keyring: \fB@u\fR or \fB-4\fR .P This keyring is shared between all the processes owned by a particular user. It isn't searched directly, but is normally linked to from the session keyring. .P (*) User default session keyring: \fB@us\fR or \fB-5\fR .P This is the default session keyring for a particular user. Login processes that change to a particular user will bind to this session until another session is set. .P (*) Group specific keyring: \fB@g\fR or \fB-6\fR .P This is a place holder for a group specific keyring, but is not actually implemented yet in the kernel. .SH COMMAND SYNTAX Any non-ambiguous shortening of a command name may be used in lieu of the full command name. This facility should not be used in scripting as new commands may be added in future that then cause ambiguity. .P (*) \fBShow process keyrings\fR .P \fBkeyctl show\fR .P This command recursively shows what keyrings a process is subscribed to and what keys and keyrings they contain. .P (*) \fBAdd a key to a keyring\fR .P \fBkeyctl add\fR <type> <desc> <data> <keyring> .P This command creates a key of the specified type and description; instantiates it with the given data and attaches it to the specified keyring. It then prints the new key's ID on stdout: .P .RS testbox>keyctl add user mykey stuff @u .br 26 .RE .P (*) \fBRequest a key\fR .P \fBkeyctl request\fR <type> <desc> [<dest_keyring>] .br \fBkeyctl request2\fR <type> <desc> <info> [<dest_keyring>] .P These two commands request the lookup of a key of the given type and description. The process's keyrings will be searched, and if a match is found the matching key's ID will be printed to stdout; and if a destination keyring is given, the key will be added to that keyring also. .P If there is no key, the first command will simply return the error ENOKEY and fail. The second command will create a partial key with the type and description, and call out to \fB/sbin/request-key\fR with that key and the extra information supplied above. This will then attempt to instantiate the key in some manner, such that a valid key is obtained. .P If a valid key is obtained, the ID will be printed and the key attached as if the original search had succeeded. .P If there wasn't a valid key obtained, a temporary negative key will be attached to the destination keyring if given and the error "Requested key not available" will be given. .P .RS testbox>keyctl request2 user debug:hello wibble .br 23 .br testbox>keyctl request user debug:hello .br 23 .RE .P (*) \fBUpdate a key\fR .P \fBkeyctl update\fR <key> <data> .P This command replaces the data attached to a key with a new set of data. If the type of the key doesn't support update then error "Operation not supported" will be returned. .P .RS testbox>keyctl update 23 zebra .RE .P (*) \fBCreate a keyring\fR .P \fBkeyctl newring\fR <name> <keyring> .P This command creates a new keyring of the specified name and attaches it to the specified keyring. The ID of the new keyring will be printed to stdout if successful. .P .RS testbox>keyctl newring squelch @us .br 27 .RE .P (*) \fBRevoke a key\fR .P \fBkeyctl revoke\fR <key> .P This command marks a key as being revoked. Any further operations on that key (apart from unlinking it) will return error "Key has been revoked". .P .RS testbox>keyctl revoke 26 .br testbox>keyctl describe 26 .br keyctl_describe: Key has been revoked .RE .P (*) \fBClear a keyring\fR .P \fBkeyctl clear\fR <keyring> .P This command unlinks all the keys attached to the specified keyring. Error "Not a directory" will be returned if the key specified is not a keyring. .P .RS testbox>keyctl clear 27 .RE .P (*) \fBLink a key to a keyring\fR .P \fBkeyctl link\fR <key> <keyring> .P This command makes a link from the key to the keyring if there's enough capacity to do so. Error "Not a directory" will be returned if the destination is not a keyring. Error "Permission denied" will be returned if the key doesn't have link permission or the keyring doesn't have write permission. Error "File table overflow" will be returned if the keyring is full. Error "Resource deadlock avoided" will be returned if an attempt was made to introduce a recursive link. .P .RS testbox>keyctl link 23 27 .br testbox>keyctl link 27 27 .br keyctl_link: Resource deadlock avoided .RE .P (*) \fBUnlink a key from a keyring\fR .P \fBkeyctl unlink\fR <key> <keyring> .P This command removes a link to the key from the keyring. Error "Not a directory" will be returned if the destination is not a keyring. Error "Permission denied" will be returned if the keyring doesn't have write permission. Error "No such file or directory" will be returned if the key is not linked to by the keyring. .P Note that this only removes one key link from the keyring; any further links to the same key are not deleted. .P .RS testbox>keyctl unlink 23 27 .RE .P (*) \fBSearch a keyring\fR .P \fBkeyctl search\fR <keyring> <type> <desc> [<dest_keyring>] .P This command non-recursively searches a keyring for a key of a particular type and description. If found, the ID of the key will be printed on stdout and the key will be attached to the destination keyring if present. Error "Requested key not available" will be returned if the key is not found. .P .RS testbox>keyctl search @us user debug:hello .br 23 .br pseries>keyctl search @us user debug:bye .br keyctl_search: Requested key not available .RE .P (*) \fBRead a key\fR .P \fBkeyctl read\fR <key> .br \fBkeyctl pipe\fR <key> .br \fBkeyctl print\fR <key> .P These commands read the payload of a key. "read" prints it on stdout as a hex dump, "pipe" dumps the raw data to stdout and "print" dumps it to stdout directly if it's entirely printable or as a hexdump preceded by ":hex:" if not. .P If the key type does not support reading of the payload, then error "Operation not supported" will be returned. .P .RS textbox>keyctl read 26 .br 1 bytes of data in key: .br 62 .br testbox>keyctl print 26 .br b .br testbox>keyctl pipe 26 .br btestbox> .RE .P (*) \fBList a keyring\fR .P \fBkeyctl list\fR <keyring> .br \fBkeyctl rlist\fR <keyring> .P These commands list the contents of a key as a keyring. "list" pretty prints the contents and "rlist" just produces a space-separated list of key IDs. .P No attempt is made to check that the specified keyring is a keyring. .P .RS testbox>keyctl list @us .br 2 keys in keyring: .br 22: vrwsl---------- 4043 -1 keyring: _uid.4043 .br 23: vrwsl---------- 4043 4043 user: debug:hello .br testbox>keyctl rlist @us .br 22 23 .RE .P (*) \fBDescribe a key\fR .P \fBkeyctl describe\fR <keyring> .br \fBkeyctl rdescribe\fR <keyring> [sep] .P These commands fetch a description of a keyring. "describe" pretty prints the description in the same fashion as the "list" command; "rdescribe" prints the raw data returned from the kernel. .P .RS testbox>keyctl describe @us -5: vrwsl---------- 4043 -1 keyring: _uid_ses.4043 testbox>keyctl rdescribe @us keyring;4043;-1;1f0000;_uid_ses.4043 .RE .P The raw string is "<type>;<uid>;<gid>;<perms>;<description>", where \fIuid\fR and \fIgid\fR are the decimal user and group IDs, \fIperms\fR is the permissions mask in hex, \fItype\fR and \fIdescription\fR are the type name and description strings (neither of which will contain semicolons). .P (*) \fBChange the access controls on a key\fR .P \fBkeyctl chown\fR <key> <uid> .br \fBkeyctl chgrp\fR <key> <gid> .P These two commands change the UID and GID associated with evaluating a key's permissions mask. The UID also governs which quota a key is taken out of. .P The chown command is not currently supported; attempting it will earn the error "Operation not supported" at best. .P For non-superuser users, the GID may only be set to the process's GID or a GID in the process's groups list. The superuser may set any GID it likes. .P .RS testbox>sudo keyctl chown 27 0 .br keyctl_chown: Operation not supported .br testbox>sudo keyctl chgrp 27 0 .RE .P (*) \fBSet the permissions mask on a key\fR .P \fBkeyctl setperm\fR <key> <mask> .P This command changes the permission control mask on a key. The mask may be specified as a hex number if it begins "0x", an octal number if it begins "0" or a decimal number otherwise. .P The hex numbers are a combination of: .P .RS UID GID Other Permission Granted .br ====== ====== ====== ================== .br 010000 000100 000001 View .br 020000 000200 000002 Read .br 040000 000400 000004 Write .br 080000 000800 000008 Search .br 100000 001000 000010 Link .br 1f0000 001f00 1f0000 All .RE .P \fIView\fR permits the type, description and other parameters of a key to be viewed. .P \fIRead\fR permits the payload (or keyring list) to be read if supported by the type. .P \fIWrite\fR permits the payload (or keyring list) to be modified or updated. .P \fISearch\fR on a key permits it to be found when a keyring to which it is linked is searched. .P \fILink\fR permits a key to be linked to a keyring. .P .RS testbox>keyctl setperm 27 0x1f1f00 .RE .P (*) \fBStart a new session with fresh keyrings\fR .P \fBkeyctl session\fR .br \fBkeyctl session\fR - [<prog> <arg1> <arg2> ...] .br \fBkeyctl session\fR <name> [<prog> <arg1> <arg2> ...] .P These commands join or create a new keyring and then run a shell or other program with that keyring as the session key. .P The variation with no arguments just creates an anonymous session keyring and attaches that as the session keyring; it then exec's $SHELL. .P The variation with a dash in place of a name creates an anonymous session keyring and attaches that as the session keyring; it then exec's the supplied command, or $SHELL if one isn't supplied. .P The variation with a name supplied creates or joins the named keyring and attaches that as the session keyring; it then exec's the supplied command, or $SHELL if one isn't supplied. .P .RS testbox>keyctl rdescribe @s .br keyring;4043;-1;1f0000;_uid_ses.4043 .P testbox>keyctl session .br Joined session keyring: 28 .br testbox>keyctl rdescribe @s .br keyring;4043;4043;1f0000;_ses.24082 .P testbox>keyctl session - .br Joined session keyring: 29 .br testbox>keyctl rdescribe @s .br keyring;4043;4043;1f0000;_ses.24139 .P testbox>keyctl session - keyctl rdescribe @s .br Joined session keyring: 30 .br keyring;4043;4043;1f0000;_ses.24185 .P testbox>keyctl session fish .br Joined session keyring: 34 .br testbox>keyctl rdescribe @s .br keyring;4043;4043;1f0000;fish .P testbox>keyctl session fish keyctl rdesc @s .br Joined session keyring: 35 .br keyring;4043;4043;1f0000;fish .RE .P (*) \fBInstantiate a key\fR .P \fBkeyctl instantiate\fR <key> <data> <keyring> .br \fBkeyctl negate\fR <key> <timeout> <keyring> .P These commands are used to attach data to a partially set up key (as created by the kernel and passed to /sbin/request-key). "instantiate" marks a key as being valid and attaches the data as the payload. "negate" marks a key as invalid and sets a timeout on it so that it'll go away after a while. This prevents a lot of quickly sequential requests from slowing the system down overmuch when they all fail, as all subsequent requests will then fail with error "Requested key not found" until the negative key has expired. .P The newly instantiated key will be attached to the specified keyring. .P These commands may only be run from the program run by request-key - a special authorisation key is set up by the kernel and attached to the request-key's session keyring. This special key is revoked once the key to which it refers has been instantiated one way or another. .P .RS keyctl instantiate $1 "Debug $3" $4 .br keyctl negate $1 30 $4 .RE .SH ERRORS .P There are a number of common errors returned by this program: .P "Not a directory" - a key wasn't a keyring. .P "Requested key not found" - the looked for key isn't available. .P "Key has been revoked" - a revoked key was accessed. .P "Key has expired" - an expired key was accessed. .P "Permission denied" - permission was denied by a UID/GID/mask combination. .SH SEE ALSO \fBkeyctl\fR(1), \fBrequest-key.conf\fR(5)