src/java.base/share/classes/java/time/ZonedDateTime.java - master - githubmirror/jdk22

src/java.base/share/classes/java/time/ZonedDateTime.java
2 267 строк104 KB
Claes Redestad
8283681: Improve ZonedDateTime offset handling
26 мар 2022, 01:37
26 мар 2022, 01:377bac0a8
/*
 * Copyright (c) 2012, 2021, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

/*
 * This file is available under and governed by the GNU General Public
 * License version 2 only, as published by the Free Software Foundation.
 * However, the following notice accompanied the original version of this
 * file:
 *
 * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *  * Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 *  * Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 *  * Neither the name of JSR-310 nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
package java.time;

import static java.time.temporal.ChronoField.INSTANT_SECONDS;
import static java.time.temporal.ChronoField.NANO_OF_SECOND;
import static java.time.temporal.ChronoField.OFFSET_SECONDS;

import java.io.DataOutput;
import java.io.IOException;
import java.io.ObjectInput;
import java.io.InvalidObjectException;
import java.io.ObjectInputStream;
import java.io.Serializable;
import java.time.chrono.ChronoZonedDateTime;
import java.time.format.DateTimeFormatter;
import java.time.format.DateTimeParseException;
import java.time.temporal.ChronoField;
import java.time.temporal.ChronoUnit;
import java.time.temporal.Temporal;
import java.time.temporal.TemporalAccessor;
import java.time.temporal.TemporalAdjuster;
import java.time.temporal.TemporalAmount;
import java.time.temporal.TemporalField;
import java.time.temporal.TemporalQueries;
import java.time.temporal.TemporalQuery;
import java.time.temporal.TemporalUnit;
import java.time.temporal.UnsupportedTemporalTypeException;
import java.time.temporal.ValueRange;
import java.time.zone.ZoneOffsetTransition;
import java.time.zone.ZoneRules;
import java.util.List;
import java.util.Objects;

/**
 * A date-time with a time-zone in the ISO-8601 calendar system,
 * such as {@code 2007-12-03T10:15:30+01:00 Europe/Paris}.
 * <p>
 * {@code ZonedDateTime} is an immutable representation of a date-time with a time-zone.
 * This class stores all date and time fields, to a precision of nanoseconds,
 * and a time-zone, with a zone offset used to handle ambiguous local date-times.
 * For example, the value
 * "2nd October 2007 at 13:45.30.123456789 +02:00 in the Europe/Paris time-zone"
 * can be stored in a {@code ZonedDateTime}.
 * <p>
 * This class handles conversion from the local time-line of {@code LocalDateTime}
 * to the instant time-line of {@code Instant}.
 * The difference between the two time-lines is the offset from UTC/Greenwich,
 * represented by a {@code ZoneOffset}.
 * <p>
 * Converting between the two time-lines involves calculating the offset using the
 * {@link ZoneRules rules} accessed from the {@code ZoneId}.
 * Obtaining the offset for an instant is simple, as there is exactly one valid
 * offset for each instant. By contrast, obtaining the offset for a local date-time
 * is not straightforward. There are three cases:
 * <ul>
 * <li>Normal, with one valid offset. For the vast majority of the year, the normal
 *  case applies, where there is a single valid offset for the local date-time.</li>
 * <li>Gap, with zero valid offsets. This is when clocks jump forward typically
 *  due to the spring daylight savings change from "winter" to "summer".
 *  In a gap there are local date-time values with no valid offset.</li>
 * <li>Overlap, with two valid offsets. This is when clocks are set back typically
 *  due to the autumn daylight savings change from "summer" to "winter".
 *  In an overlap there are local date-time values with two valid offsets.</li>
 * </ul>
 * <p>
 * Any method that converts directly or implicitly from a local date-time to an
 * instant by obtaining the offset has the potential to be complicated.
 * <p>
 * For Gaps, the general strategy is that if the local date-time falls in the
 * middle of a Gap, then the resulting zoned date-time will have a local date-time
 * shifted forwards by the length of the Gap, resulting in a date-time in the later
 * offset, typically "summer" time.
 * <p>
 * For Overlaps, the general strategy is that if the local date-time falls in the
 * middle of an Overlap, then the previous offset will be retained. If there is no
 * previous offset, or the previous offset is invalid, then the earlier offset is
 * used, typically "summer" time.. Two additional methods,
 * {@link #withEarlierOffsetAtOverlap()} and {@link #withLaterOffsetAtOverlap()},
 * help manage the case of an overlap.
 * <p>
 * In terms of design, this class should be viewed primarily as the combination
 * of a {@code LocalDateTime} and a {@code ZoneId}. The {@code ZoneOffset} is
 * a vital, but secondary, piece of information, used to ensure that the class
 * represents an instant, especially during a daylight savings overlap.
 * <p>
 * This is a <a href="{@docRoot}/java.base/java/lang/doc-files/ValueBased.html">value-based</a>
 * class; programmers should treat instances that are
 * {@linkplain #equals(Object) equal} as interchangeable and should not
 * use instances for synchronization, or unpredictable behavior may
 * occur. For example, in a future release, synchronization may fail.
 * The {@code equals} method should be used for comparisons.
 *
 * @implSpec
 * A {@code ZonedDateTime} holds state equivalent to three separate objects,
 * a {@code LocalDateTime}, a {@code ZoneId} and the resolved {@code ZoneOffset}.
 * The offset and local date-time are used to define an instant when necessary.
 * The zone ID is used to obtain the rules for how and when the offset changes.
 * The offset cannot be freely set, as the zone controls which offsets are valid.
 * <p>
 * This class is immutable and thread-safe.
 *
 * @since 1.8
 */
@jdk.internal.ValueBased
public final class ZonedDateTime
        implements Temporal, ChronoZonedDateTime<LocalDate>, Serializable {

    /**
     * Serialization version.
     */
    @java.io.Serial
    private static final long serialVersionUID = -6260982410461394882L;

    /**
     * The local date-time.
     */
    private final LocalDateTime dateTime;
    /**
     * The offset from UTC/Greenwich.
     */
    private final ZoneOffset offset;
    /**
     * The time-zone.
     */
    private final ZoneId zone;

    //-----------------------------------------------------------------------
    /**
     * Obtains the current date-time from the system clock in the default time-zone.
     * <p>
     * This will query the {@link Clock#systemDefaultZone() system clock} in the default
     * time-zone to obtain the current date-time.
     * The zone and offset will be set based on the time-zone in the clock.
     * <p>
     * Using this method will prevent the ability to use an alternate clock for testing
     * because the clock is hard-coded.
     *
     * @return the current date-time using the system clock, not null
     */
    public static ZonedDateTime now() {
        return now(Clock.systemDefaultZone());
    }

    /**
     * Obtains the current date-time from the system clock in the specified time-zone.
     * <p>
     * This will query the {@link Clock#system(ZoneId) system clock} to obtain the current date-time.
     * Specifying the time-zone avoids dependence on the default time-zone.
     * The offset will be calculated from the specified time-zone.
     * <p>
     * Using this method will prevent the ability to use an alternate clock for testing
     * because the clock is hard-coded.
     *
     * @param zone  the zone ID to use, not null
     * @return the current date-time using the system clock, not null
     */
    public static ZonedDateTime now(ZoneId zone) {
        return now(Clock.system(zone));
    }

    /**
     * Obtains the current date-time from the specified clock.
     * <p>
     * This will query the specified clock to obtain the current date-time.
     * The zone and offset will be set based on the time-zone in the clock.
     * <p>
     * Using this method allows the use of an alternate clock for testing.
     * The alternate clock may be introduced using {@link Clock dependency injection}.
     *
     * @param clock  the clock to use, not null
     * @return the current date-time, not null
     */
    public static ZonedDateTime now(Clock clock) {
        Objects.requireNonNull(clock, "clock");
        final Instant now = clock.instant();  // called once
        return ofInstant(now, clock.getZone());
    }

    //-----------------------------------------------------------------------
    /**
     * Obtains an instance of {@code ZonedDateTime} from a local date and time.
     * <p>
     * This creates a zoned date-time matching the input local date and time as closely as possible.
     * Time-zone rules, such as daylight savings, mean that not every local date-time
     * is valid for the specified zone, thus the local date-time may be adjusted.
     * <p>
     * The local date time and first combined to form a local date-time.
     * The local date-time is then resolved to a single instant on the time-line.
     * This is achieved by finding a valid offset from UTC/Greenwich for the local
     * date-time as defined by the {@link ZoneRules rules} of the zone ID.
     *<p>
     * In most cases, there is only one valid offset for a local date-time.
     * In the case of an overlap, when clocks are set back, there are two valid offsets.
     * This method uses the earlier offset typically corresponding to "summer".
     * <p>
     * In the case of a gap, when clocks jump forward, there is no valid offset.
     * Instead, the local date-time is adjusted to be later by the length of the gap.
     * For a typical one hour daylight savings change, the local date-time will be
     * moved one hour later into the offset typically corresponding to "summer".
     *
     * @param date  the local date, not null
     * @param time  the local time, not null
     * @param zone  the time-zone, not null
     * @return the offset date-time, not null
     */
    public static ZonedDateTime of(LocalDate date, LocalTime time, ZoneId zone) {
        return of(LocalDateTime.of(date, time), zone);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} from a local date-time.
     * <p>
     * This creates a zoned date-time matching the input local date-time as closely as possible.
     * Time-zone rules, such as daylight savings, mean that not every local date-time
     * is valid for the specified zone, thus the local date-time may be adjusted.
     * <p>
     * The local date-time is resolved to a single instant on the time-line.
     * This is achieved by finding a valid offset from UTC/Greenwich for the local
     * date-time as defined by the {@link ZoneRules rules} of the zone ID.
     *<p>
     * In most cases, there is only one valid offset for a local date-time.
     * In the case of an overlap, when clocks are set back, there are two valid offsets.
     * This method uses the earlier offset typically corresponding to "summer".
     * <p>
     * In the case of a gap, when clocks jump forward, there is no valid offset.
     * Instead, the local date-time is adjusted to be later by the length of the gap.
     * For a typical one hour daylight savings change, the local date-time will be
     * moved one hour later into the offset typically corresponding to "summer".
     *
     * @param localDateTime  the local date-time, not null
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     */
    public static ZonedDateTime of(LocalDateTime localDateTime, ZoneId zone) {
        return ofLocal(localDateTime, zone, null);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} from a year, month, day,
     * hour, minute, second, nanosecond and time-zone.
     * <p>
     * This creates a zoned date-time matching the local date-time of the seven
     * specified fields as closely as possible.
     * Time-zone rules, such as daylight savings, mean that not every local date-time
     * is valid for the specified zone, thus the local date-time may be adjusted.
     * <p>
     * The local date-time is resolved to a single instant on the time-line.
     * This is achieved by finding a valid offset from UTC/Greenwich for the local
     * date-time as defined by the {@link ZoneRules rules} of the zone ID.
     *<p>
     * In most cases, there is only one valid offset for a local date-time.
     * In the case of an overlap, when clocks are set back, there are two valid offsets.
     * This method uses the earlier offset typically corresponding to "summer".
     * <p>
     * In the case of a gap, when clocks jump forward, there is no valid offset.
     * Instead, the local date-time is adjusted to be later by the length of the gap.
     * For a typical one hour daylight savings change, the local date-time will be
     * moved one hour later into the offset typically corresponding to "summer".
     * <p>
     * This method exists primarily for writing test cases.
     * Non test-code will typically use other methods to create an offset time.
     * {@code LocalDateTime} has five additional convenience variants of the
     * equivalent factory method taking fewer arguments.
     * They are not provided here to reduce the footprint of the API.
     *
     * @param year  the year to represent, from MIN_YEAR to MAX_YEAR
     * @param month  the month-of-year to represent, from 1 (January) to 12 (December)
     * @param dayOfMonth  the day-of-month to represent, from 1 to 31
     * @param hour  the hour-of-day to represent, from 0 to 23
     * @param minute  the minute-of-hour to represent, from 0 to 59
     * @param second  the second-of-minute to represent, from 0 to 59
     * @param nanoOfSecond  the nano-of-second to represent, from 0 to 999,999,999
     * @param zone  the time-zone, not null
     * @return the offset date-time, not null
     * @throws DateTimeException if the value of any field is out of range, or
     *  if the day-of-month is invalid for the month-year
     */
    public static ZonedDateTime of(
            int year, int month, int dayOfMonth,
            int hour, int minute, int second, int nanoOfSecond, ZoneId zone) {
        LocalDateTime dt = LocalDateTime.of(year, month, dayOfMonth, hour, minute, second, nanoOfSecond);
        return ofLocal(dt, zone, null);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} from a local date-time
     * using the preferred offset if possible.
     * <p>
     * The local date-time is resolved to a single instant on the time-line.
     * This is achieved by finding a valid offset from UTC/Greenwich for the local
     * date-time as defined by the {@link ZoneRules rules} of the zone ID.
     *<p>
     * In most cases, there is only one valid offset for a local date-time.
     * In the case of an overlap, where clocks are set back, there are two valid offsets.
     * If the preferred offset is one of the valid offsets then it is used.
     * Otherwise the earlier valid offset is used, typically corresponding to "summer".
     * <p>
     * In the case of a gap, where clocks jump forward, there is no valid offset.
     * Instead, the local date-time is adjusted to be later by the length of the gap.
     * For a typical one hour daylight savings change, the local date-time will be
     * moved one hour later into the offset typically corresponding to "summer".
     *
     * @param localDateTime  the local date-time, not null
     * @param zone  the time-zone, not null
     * @param preferredOffset  the zone offset, null if no preference
     * @return the zoned date-time, not null
     */
    public static ZonedDateTime ofLocal(LocalDateTime localDateTime, ZoneId zone, ZoneOffset preferredOffset) {
        Objects.requireNonNull(localDateTime, "localDateTime");
        Objects.requireNonNull(zone, "zone");
        if (zone instanceof ZoneOffset) {
            return new ZonedDateTime(localDateTime, (ZoneOffset) zone, zone);
        }
        ZoneRules rules = zone.getRules();
        List<ZoneOffset> validOffsets = rules.getValidOffsets(localDateTime);
        ZoneOffset offset;
        if (validOffsets.size() == 1) {
            offset = validOffsets.get(0);
        } else if (validOffsets.size() == 0) {
            ZoneOffsetTransition trans = rules.getTransition(localDateTime);
            localDateTime = localDateTime.plusSeconds(trans.getDuration().getSeconds());
            offset = trans.getOffsetAfter();
        } else {
            if (preferredOffset != null && validOffsets.contains(preferredOffset)) {
                offset = preferredOffset;
            } else {
                offset = Objects.requireNonNull(validOffsets.get(0), "offset");  // protect against bad ZoneRules
            }
        }
        return new ZonedDateTime(localDateTime, offset, zone);
    }

    //-----------------------------------------------------------------------
    /**
     * Obtains an instance of {@code ZonedDateTime} from an {@code Instant}.
     * <p>
     * This creates a zoned date-time with the same instant as that specified.
     * Calling {@link #toInstant()} will return an instant equal to the one used here.
     * <p>
     * Converting an instant to a zoned date-time is simple as there is only one valid
     * offset for each instant.
     *
     * @param instant  the instant to create the date-time from, not null
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    public static ZonedDateTime ofInstant(Instant instant, ZoneId zone) {
        Objects.requireNonNull(instant, "instant");
        Objects.requireNonNull(zone, "zone");
        return create(instant.getEpochSecond(), instant.getNano(), zone);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} from the instant formed by combining
     * the local date-time and offset.
     * <p>
     * This creates a zoned date-time by {@link LocalDateTime#toInstant(ZoneOffset) combining}
     * the {@code LocalDateTime} and {@code ZoneOffset}.
     * This combination uniquely specifies an instant without ambiguity.
     * <p>
     * Converting an instant to a zoned date-time is simple as there is only one valid
     * offset for each instant. If the valid offset is different to the offset specified,
     * then the date-time and offset of the zoned date-time will differ from those specified.
     * <p>
     * If the {@code ZoneId} to be used is a {@code ZoneOffset}, this method is equivalent
     * to {@link #of(LocalDateTime, ZoneId)}.
     *
     * @param localDateTime  the local date-time, not null
     * @param offset  the zone offset, not null
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     */
    public static ZonedDateTime ofInstant(LocalDateTime localDateTime, ZoneOffset offset, ZoneId zone) {
        Objects.requireNonNull(localDateTime, "localDateTime");
        Objects.requireNonNull(offset, "offset");
        Objects.requireNonNull(zone, "zone");
        if (zone.getRules().isValidOffset(localDateTime, offset)) {
            return new ZonedDateTime(localDateTime, offset, zone);
        }
        return create(localDateTime.toEpochSecond(offset), localDateTime.getNano(), zone);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} using seconds from the
     * epoch of 1970-01-01T00:00:00Z.
     *
     * @param epochSecond  the number of seconds from the epoch of 1970-01-01T00:00:00Z
     * @param nanoOfSecond  the nanosecond within the second, from 0 to 999,999,999
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     * @throws DateTimeException if the result exceeds the supported range
     */
    private static ZonedDateTime create(long epochSecond, int nanoOfSecond, ZoneId zone) {
        // nanoOfSecond is in a range that'll not affect epochSecond, validated
        // by LocalDateTime.ofEpochSecond
        ZoneOffset offset = zone.getOffset(epochSecond);
        LocalDateTime ldt = LocalDateTime.ofEpochSecond(epochSecond, nanoOfSecond, offset);
        return new ZonedDateTime(ldt, offset, zone);
    }

    //-----------------------------------------------------------------------
    /**
     * Obtains an instance of {@code ZonedDateTime} strictly validating the
     * combination of local date-time, offset and zone ID.
     * <p>
     * This creates a zoned date-time ensuring that the offset is valid for the
     * local date-time according to the rules of the specified zone.
     * If the offset is invalid, an exception is thrown.
     *
     * @param localDateTime  the local date-time, not null
     * @param offset  the zone offset, not null
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     * @throws DateTimeException if the combination of arguments is invalid
     */
    public static ZonedDateTime ofStrict(LocalDateTime localDateTime, ZoneOffset offset, ZoneId zone) {
        Objects.requireNonNull(localDateTime, "localDateTime");
        Objects.requireNonNull(offset, "offset");
        Objects.requireNonNull(zone, "zone");
        ZoneRules rules = zone.getRules();
        if (rules.isValidOffset(localDateTime, offset) == false) {
            ZoneOffsetTransition trans = rules.getTransition(localDateTime);
            if (trans != null && trans.isGap()) {
                // error message says daylight savings for simplicity
                // even though there are other kinds of gaps
                throw new DateTimeException("LocalDateTime '" + localDateTime +
                        "' does not exist in zone '" + zone +
                        "' due to a gap in the local time-line, typically caused by daylight savings");
            }
            throw new DateTimeException("ZoneOffset '" + offset + "' is not valid for LocalDateTime '" +
                    localDateTime + "' in zone '" + zone + "'");
        }
        return new ZonedDateTime(localDateTime, offset, zone);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} leniently, for advanced use cases,
     * allowing any combination of local date-time, offset and zone ID.
     * <p>
     * This creates a zoned date-time with no checks other than no nulls.
     * This means that the resulting zoned date-time may have an offset that is in conflict
     * with the zone ID.
     * <p>
     * This method is intended for advanced use cases.
     * For example, consider the case where a zoned date-time with valid fields is created
     * and then stored in a database or serialization-based store. At some later point,
     * the object is then re-loaded. However, between those points in time, the government
     * that defined the time-zone has changed the rules, such that the originally stored
     * local date-time now does not occur. This method can be used to create the object
     * in an "invalid" state, despite the change in rules.
     *
     * @param localDateTime  the local date-time, not null
     * @param offset  the zone offset, not null
     * @param zone  the time-zone, not null
     * @return the zoned date-time, not null
     */
    private static ZonedDateTime ofLenient(LocalDateTime localDateTime, ZoneOffset offset, ZoneId zone) {
        Objects.requireNonNull(localDateTime, "localDateTime");
        Objects.requireNonNull(offset, "offset");
        Objects.requireNonNull(zone, "zone");
        if (zone instanceof ZoneOffset && offset.equals(zone) == false) {
            throw new IllegalArgumentException("ZoneId must match ZoneOffset");
        }
        return new ZonedDateTime(localDateTime, offset, zone);
    }

    //-----------------------------------------------------------------------
    /**
     * Obtains an instance of {@code ZonedDateTime} from a temporal object.
     * <p>
     * This obtains a zoned date-time based on the specified temporal.
     * A {@code TemporalAccessor} represents an arbitrary set of date and time information,
     * which this factory converts to an instance of {@code ZonedDateTime}.
     * <p>
     * The conversion will first obtain a {@code ZoneId} from the temporal object,
     * falling back to a {@code ZoneOffset} if necessary. It will then try to obtain
     * an {@code Instant}, falling back to a {@code LocalDateTime} if necessary.
     * The result will be either the combination of {@code ZoneId} or {@code ZoneOffset}
     * with {@code Instant} or {@code LocalDateTime}.
     * Implementations are permitted to perform optimizations such as accessing
     * those fields that are equivalent to the relevant objects.
     * <p>
     * This method matches the signature of the functional interface {@link TemporalQuery}
     * allowing it to be used as a query via method reference, {@code ZonedDateTime::from}.
     *
     * @param temporal  the temporal object to convert, not null
     * @return the zoned date-time, not null
     * @throws DateTimeException if unable to convert to an {@code ZonedDateTime}
     */
    public static ZonedDateTime from(TemporalAccessor temporal) {
        if (temporal instanceof ZonedDateTime) {
            return (ZonedDateTime) temporal;
        }
        try {
            ZoneId zone = ZoneId.from(temporal);
            if (temporal.isSupported(INSTANT_SECONDS)) {
                long epochSecond = temporal.getLong(INSTANT_SECONDS);
                int nanoOfSecond = temporal.get(NANO_OF_SECOND);
                return create(epochSecond, nanoOfSecond, zone);
            } else {
                LocalDate date = LocalDate.from(temporal);
                LocalTime time = LocalTime.from(temporal);
                return of(date, time, zone);
            }
        } catch (DateTimeException ex) {
            throw new DateTimeException("Unable to obtain ZonedDateTime from TemporalAccessor: " +
                    temporal + " of type " + temporal.getClass().getName(), ex);
        }
    }

    //-----------------------------------------------------------------------
    /**
     * Obtains an instance of {@code ZonedDateTime} from a text string such as
     * {@code 2007-12-03T10:15:30+01:00[Europe/Paris]}.
     * <p>
     * The string must represent a valid date-time and is parsed using
     * {@link java.time.format.DateTimeFormatter#ISO_ZONED_DATE_TIME}.
     *
     * @param text  the text to parse such as "2007-12-03T10:15:30+01:00[Europe/Paris]", not null
     * @return the parsed zoned date-time, not null
     * @throws DateTimeParseException if the text cannot be parsed
     */
    public static ZonedDateTime parse(CharSequence text) {
        return parse(text, DateTimeFormatter.ISO_ZONED_DATE_TIME);
    }

    /**
     * Obtains an instance of {@code ZonedDateTime} from a text string using a specific formatter.
     * <p>
     * The text is parsed using the formatter, returning a date-time.
     *
     * @param text  the text to parse, not null
     * @param formatter  the formatter to use, not null
     * @return the parsed zoned date-time, not null
     * @throws DateTimeParseException if the text cannot be parsed
     */
    public static ZonedDateTime parse(CharSequence text, DateTimeFormatter formatter) {
        Objects.requireNonNull(formatter, "formatter");
        return formatter.parse(text, ZonedDateTime::from);
    }

    //-----------------------------------------------------------------------
    /**
     * Constructor.
     *
     * @param dateTime  the date-time, validated as not null
     * @param offset  the zone offset, validated as not null
     * @param zone  the time-zone, validated as not null
     */
    private ZonedDateTime(LocalDateTime dateTime, ZoneOffset offset, ZoneId zone) {
        this.dateTime = dateTime;
        this.offset = offset;
        this.zone = zone;
    }

    /**
     * Resolves the new local date-time using this zone ID, retaining the offset if possible.
     *
     * @param newDateTime  the new local date-time, not null
     * @return the zoned date-time, not null
     */
    private ZonedDateTime resolveLocal(LocalDateTime newDateTime) {
        return ofLocal(newDateTime, zone, offset);
    }

    /**
     * Resolves the new local date-time using the offset to identify the instant.
     *
     * @param newDateTime  the new local date-time, not null
     * @return the zoned date-time, not null
     */
    private ZonedDateTime resolveInstant(LocalDateTime newDateTime) {
        return ofInstant(newDateTime, offset, zone);
    }

    /**
     * Resolves the offset into this zoned date-time for the with methods.
     * <p>
     * This typically ignores the offset, unless it can be used to switch offset in a DST overlap.
     *
     * @param offset  the offset, not null
     * @return the zoned date-time, not null
     */
    private ZonedDateTime resolveOffset(ZoneOffset offset) {
        if (offset.equals(this.offset) == false && zone.getRules().isValidOffset(dateTime, offset)) {
            return new ZonedDateTime(dateTime, offset, zone);
        }
        return this;
    }

    //-----------------------------------------------------------------------
    /**
     * Checks if the specified field is supported.
     * <p>
     * This checks if this date-time can be queried for the specified field.
     * If false, then calling the {@link #range(TemporalField) range},
     * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)}
     * methods will throw an exception.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The supported fields are:
     * <ul>
     * <li>{@code NANO_OF_SECOND}
     * <li>{@code NANO_OF_DAY}
     * <li>{@code MICRO_OF_SECOND}
     * <li>{@code MICRO_OF_DAY}
     * <li>{@code MILLI_OF_SECOND}
     * <li>{@code MILLI_OF_DAY}
     * <li>{@code SECOND_OF_MINUTE}
     * <li>{@code SECOND_OF_DAY}
     * <li>{@code MINUTE_OF_HOUR}
     * <li>{@code MINUTE_OF_DAY}
     * <li>{@code HOUR_OF_AMPM}
     * <li>{@code CLOCK_HOUR_OF_AMPM}
     * <li>{@code HOUR_OF_DAY}
     * <li>{@code CLOCK_HOUR_OF_DAY}
     * <li>{@code AMPM_OF_DAY}
     * <li>{@code DAY_OF_WEEK}
     * <li>{@code ALIGNED_DAY_OF_WEEK_IN_MONTH}
     * <li>{@code ALIGNED_DAY_OF_WEEK_IN_YEAR}
     * <li>{@code DAY_OF_MONTH}
     * <li>{@code DAY_OF_YEAR}
     * <li>{@code EPOCH_DAY}
     * <li>{@code ALIGNED_WEEK_OF_MONTH}
     * <li>{@code ALIGNED_WEEK_OF_YEAR}
     * <li>{@code MONTH_OF_YEAR}
     * <li>{@code PROLEPTIC_MONTH}
     * <li>{@code YEAR_OF_ERA}
     * <li>{@code YEAR}
     * <li>{@code ERA}
     * <li>{@code INSTANT_SECONDS}
     * <li>{@code OFFSET_SECONDS}
     * </ul>
     * All other {@code ChronoField} instances will return false.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)}
     * passing {@code this} as the argument.
     * Whether the field is supported is determined by the field.
     *
     * @param field  the field to check, null returns false
     * @return true if the field is supported on this date-time, false if not
     */
    @Override
    public boolean isSupported(TemporalField field) {
        return field instanceof ChronoField || (field != null && field.isSupportedBy(this));
    }

    /**
     * Checks if the specified unit is supported.
     * <p>
     * This checks if the specified unit can be added to, or subtracted from, this date-time.
     * If false, then calling the {@link #plus(long, TemporalUnit)} and
     * {@link #minus(long, TemporalUnit) minus} methods will throw an exception.
     * <p>
     * If the unit is a {@link ChronoUnit} then the query is implemented here.
     * The supported units are:
     * <ul>
     * <li>{@code NANOS}
     * <li>{@code MICROS}
     * <li>{@code MILLIS}
     * <li>{@code SECONDS}
     * <li>{@code MINUTES}
     * <li>{@code HOURS}
     * <li>{@code HALF_DAYS}
     * <li>{@code DAYS}
     * <li>{@code WEEKS}
     * <li>{@code MONTHS}
     * <li>{@code YEARS}
     * <li>{@code DECADES}
     * <li>{@code CENTURIES}
     * <li>{@code MILLENNIA}
     * <li>{@code ERAS}
     * </ul>
     * All other {@code ChronoUnit} instances will return false.
     * <p>
     * If the unit is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)}
     * passing {@code this} as the argument.
     * Whether the unit is supported is determined by the unit.
     *
     * @param unit  the unit to check, null returns false
     * @return true if the unit can be added/subtracted, false if not
     */
    @Override  // override for Javadoc
    public boolean isSupported(TemporalUnit unit) {
        return ChronoZonedDateTime.super.isSupported(unit);
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the range of valid values for the specified field.
     * <p>
     * The range object expresses the minimum and maximum valid values for a field.
     * This date-time is used to enhance the accuracy of the returned range.
     * If it is not possible to return the range, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return
     * appropriate range instances.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)}
     * passing {@code this} as the argument.
     * Whether the range can be obtained is determined by the field.
     *
     * @param field  the field to query the range for, not null
     * @return the range of valid values for the field, not null
     * @throws DateTimeException if the range for the field cannot be obtained
     * @throws UnsupportedTemporalTypeException if the field is not supported
     */
    @Override
    public ValueRange range(TemporalField field) {
        if (field instanceof ChronoField) {
            if (field == INSTANT_SECONDS || field == OFFSET_SECONDS) {
                return field.range();
            }
            return dateTime.range(field);
        }
        return field.rangeRefinedBy(this);
    }

    /**
     * Gets the value of the specified field from this date-time as an {@code int}.
     * <p>
     * This queries this date-time for the value of the specified field.
     * The returned value will always be within the valid range of values for the field.
     * If it is not possible to return the value, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return valid
     * values based on this date-time, except {@code NANO_OF_DAY}, {@code MICRO_OF_DAY},
     * {@code EPOCH_DAY}, {@code PROLEPTIC_MONTH} and {@code INSTANT_SECONDS} which are too
     * large to fit in an {@code int} and throw an {@code UnsupportedTemporalTypeException}.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
     * passing {@code this} as the argument. Whether the value can be obtained,
     * and what the value represents, is determined by the field.
     *
     * @param field  the field to get, not null
     * @return the value for the field
     * @throws DateTimeException if a value for the field cannot be obtained or
     *         the value is outside the range of valid values for the field
     * @throws UnsupportedTemporalTypeException if the field is not supported or
     *         the range of values exceeds an {@code int}
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override  // override for Javadoc and performance
    public int get(TemporalField field) {
        if (field instanceof ChronoField chronoField) {
            return switch (chronoField) {
                case INSTANT_SECONDS -> throw new UnsupportedTemporalTypeException("Invalid field " +
                                         "'InstantSeconds' for get() method, use getLong() instead");
                case OFFSET_SECONDS -> getOffset().getTotalSeconds();
                default -> dateTime.get(field);
            };
        }
        return ChronoZonedDateTime.super.get(field);
    }

    /**
     * Gets the value of the specified field from this date-time as a {@code long}.
     * <p>
     * This queries this date-time for the value of the specified field.
     * If it is not possible to return the value, because the field is not supported
     * or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoField} then the query is implemented here.
     * The {@link #isSupported(TemporalField) supported fields} will return valid
     * values based on this date-time.
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
     * passing {@code this} as the argument. Whether the value can be obtained,
     * and what the value represents, is determined by the field.
     *
     * @param field  the field to get, not null
     * @return the value for the field
     * @throws DateTimeException if a value for the field cannot be obtained
     * @throws UnsupportedTemporalTypeException if the field is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public long getLong(TemporalField field) {
        if (field instanceof ChronoField chronoField) {
            return switch (chronoField) {
                case INSTANT_SECONDS -> toEpochSecond();
                case OFFSET_SECONDS -> getOffset().getTotalSeconds();
                default -> dateTime.getLong(field);
            };
        }
        return field.getFrom(this);
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the zone offset, such as '+01:00'.
     * <p>
     * This is the offset of the local date-time from UTC/Greenwich.
     *
     * @return the zone offset, not null
     */
    @Override
    public ZoneOffset getOffset() {
        return offset;
    }

    /**
     * Returns a copy of this date-time changing the zone offset to the
     * earlier of the two valid offsets at a local time-line overlap.
     * <p>
     * This method only has any effect when the local time-line overlaps, such as
     * at an autumn daylight savings cutover. In this scenario, there are two
     * valid offsets for the local date-time. Calling this method will return
     * a zoned date-time with the earlier of the two selected.
     * <p>
     * If this method is called when it is not an overlap, {@code this}
     * is returned.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @return a {@code ZonedDateTime} based on this date-time with the earlier offset, not null
     */
    @Override
    public ZonedDateTime withEarlierOffsetAtOverlap() {
        ZoneOffsetTransition trans = getZone().getRules().getTransition(dateTime);
        if (trans != null && trans.isOverlap()) {
            ZoneOffset earlierOffset = trans.getOffsetBefore();
            if (earlierOffset.equals(offset) == false) {
                return new ZonedDateTime(dateTime, earlierOffset, zone);
            }
        }
        return this;
    }

    /**
     * Returns a copy of this date-time changing the zone offset to the
     * later of the two valid offsets at a local time-line overlap.
     * <p>
     * This method only has any effect when the local time-line overlaps, such as
     * at an autumn daylight savings cutover. In this scenario, there are two
     * valid offsets for the local date-time. Calling this method will return
     * a zoned date-time with the later of the two selected.
     * <p>
     * If this method is called when it is not an overlap, {@code this}
     * is returned.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @return a {@code ZonedDateTime} based on this date-time with the later offset, not null
     */
    @Override
    public ZonedDateTime withLaterOffsetAtOverlap() {
        ZoneOffsetTransition trans = getZone().getRules().getTransition(toLocalDateTime());
        if (trans != null) {
            ZoneOffset laterOffset = trans.getOffsetAfter();
            if (laterOffset.equals(offset) == false) {
                return new ZonedDateTime(dateTime, laterOffset, zone);
            }
        }
        return this;
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the time-zone, such as 'Europe/Paris'.
     * <p>
     * This returns the zone ID. This identifies the time-zone {@link ZoneRules rules}
     * that determine when and how the offset from UTC/Greenwich changes.
     * <p>
     * The zone ID may be same as the {@linkplain #getOffset() offset}.
     * If this is true, then any future calculations, such as addition or subtraction,
     * have no complex edge cases due to time-zone rules.
     * See also {@link #withFixedOffsetZone()}.
     *
     * @return the time-zone, not null
     */
    @Override
    public ZoneId getZone() {
        return zone;
    }

    /**
     * Returns a copy of this date-time with a different time-zone,
     * retaining the local date-time if possible.
     * <p>
     * This method changes the time-zone and retains the local date-time.
     * The local date-time is only changed if it is invalid for the new zone,
     * determined using the same approach as
     * {@link #ofLocal(LocalDateTime, ZoneId, ZoneOffset)}.
     * <p>
     * To change the zone and adjust the local date-time,
     * use {@link #withZoneSameInstant(ZoneId)}.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param zone  the time-zone to change to, not null
     * @return a {@code ZonedDateTime} based on this date-time with the requested zone, not null
     */
    @Override
    public ZonedDateTime withZoneSameLocal(ZoneId zone) {
        Objects.requireNonNull(zone, "zone");
        return this.zone.equals(zone) ? this : ofLocal(dateTime, zone, offset);
    }

    /**
     * Returns a copy of this date-time with a different time-zone,
     * retaining the instant.
     * <p>
     * This method changes the time-zone and retains the instant.
     * This normally results in a change to the local date-time.
     * <p>
     * This method is based on retaining the same instant, thus gaps and overlaps
     * in the local time-line have no effect on the result.
     * <p>
     * To change the offset while keeping the local time,
     * use {@link #withZoneSameLocal(ZoneId)}.
     *
     * @param zone  the time-zone to change to, not null
     * @return a {@code ZonedDateTime} based on this date-time with the requested zone, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    @Override
    public ZonedDateTime withZoneSameInstant(ZoneId zone) {
        Objects.requireNonNull(zone, "zone");
        return this.zone.equals(zone) ? this :
            create(dateTime.toEpochSecond(offset), dateTime.getNano(), zone);
    }

    /**
     * Returns a copy of this date-time with the zone ID set to the offset.
     * <p>
     * This returns a zoned date-time where the zone ID is the same as {@link #getOffset()}.
     * The local date-time, offset and instant of the result will be the same as in this date-time.
     * <p>
     * Setting the date-time to a fixed single offset means that any future
     * calculations, such as addition or subtraction, have no complex edge cases
     * due to time-zone rules.
     * This might also be useful when sending a zoned date-time across a network,
     * as most protocols, such as ISO-8601, only handle offsets,
     * and not region-based zone IDs.
     * <p>
     * This is equivalent to {@code ZonedDateTime.of(zdt.toLocalDateTime(), zdt.getOffset())}.
     *
     * @return a {@code ZonedDateTime} with the zone ID set to the offset, not null
     */
    public ZonedDateTime withFixedOffsetZone() {
        return this.zone.equals(offset) ? this : new ZonedDateTime(dateTime, offset, offset);
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the {@code LocalDateTime} part of this date-time.
     * <p>
     * This returns a {@code LocalDateTime} with the same year, month, day and time
     * as this date-time.
     *
     * @return the local date-time part of this date-time, not null
     */
    @Override  // override for return type
    public LocalDateTime toLocalDateTime() {
        return dateTime;
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the {@code LocalDate} part of this date-time.
     * <p>
     * This returns a {@code LocalDate} with the same year, month and day
     * as this date-time.
     *
     * @return the date part of this date-time, not null
     */
    @Override  // override for return type
    public LocalDate toLocalDate() {
        return dateTime.toLocalDate();
    }

    /**
     * Gets the year field.
     * <p>
     * This method returns the primitive {@code int} value for the year.
     * <p>
     * The year returned by this method is proleptic as per {@code get(YEAR)}.
     * To obtain the year-of-era, use {@code get(YEAR_OF_ERA)}.
     *
     * @return the year, from MIN_YEAR to MAX_YEAR
     */
    public int getYear() {
        return dateTime.getYear();
    }

    /**
     * Gets the month-of-year field from 1 to 12.
     * <p>
     * This method returns the month as an {@code int} from 1 to 12.
     * Application code is frequently clearer if the enum {@link Month}
     * is used by calling {@link #getMonth()}.
     *
     * @return the month-of-year, from 1 to 12
     * @see #getMonth()
     */
    public int getMonthValue() {
        return dateTime.getMonthValue();
    }

    /**
     * Gets the month-of-year field using the {@code Month} enum.
     * <p>
     * This method returns the enum {@link Month} for the month.
     * This avoids confusion as to what {@code int} values mean.
     * If you need access to the primitive {@code int} value then the enum
     * provides the {@link Month#getValue() int value}.
     *
     * @return the month-of-year, not null
     * @see #getMonthValue()
     */
    public Month getMonth() {
        return dateTime.getMonth();
    }

    /**
     * Gets the day-of-month field.
     * <p>
     * This method returns the primitive {@code int} value for the day-of-month.
     *
     * @return the day-of-month, from 1 to 31
     */
    public int getDayOfMonth() {
        return dateTime.getDayOfMonth();
    }

    /**
     * Gets the day-of-year field.
     * <p>
     * This method returns the primitive {@code int} value for the day-of-year.
     *
     * @return the day-of-year, from 1 to 365, or 366 in a leap year
     */
    public int getDayOfYear() {
        return dateTime.getDayOfYear();
    }

    /**
     * Gets the day-of-week field, which is an enum {@code DayOfWeek}.
     * <p>
     * This method returns the enum {@link DayOfWeek} for the day-of-week.
     * This avoids confusion as to what {@code int} values mean.
     * If you need access to the primitive {@code int} value then the enum
     * provides the {@link DayOfWeek#getValue() int value}.
     * <p>
     * Additional information can be obtained from the {@code DayOfWeek}.
     * This includes textual names of the values.
     *
     * @return the day-of-week, not null
     */
    public DayOfWeek getDayOfWeek() {
        return dateTime.getDayOfWeek();
    }

    //-----------------------------------------------------------------------
    /**
     * Gets the {@code LocalTime} part of this date-time.
     * <p>
     * This returns a {@code LocalTime} with the same hour, minute, second and
     * nanosecond as this date-time.
     *
     * @return the time part of this date-time, not null
     */
    @Override  // override for Javadoc and performance
    public LocalTime toLocalTime() {
        return dateTime.toLocalTime();
    }

    /**
     * Gets the hour-of-day field.
     *
     * @return the hour-of-day, from 0 to 23
     */
    public int getHour() {
        return dateTime.getHour();
    }

    /**
     * Gets the minute-of-hour field.
     *
     * @return the minute-of-hour, from 0 to 59
     */
    public int getMinute() {
        return dateTime.getMinute();
    }

    /**
     * Gets the second-of-minute field.
     *
     * @return the second-of-minute, from 0 to 59
     */
    public int getSecond() {
        return dateTime.getSecond();
    }

    /**
     * Gets the nano-of-second field.
     *
     * @return the nano-of-second, from 0 to 999,999,999
     */
    public int getNano() {
        return dateTime.getNano();
    }

    //-----------------------------------------------------------------------
    /**
     * Returns an adjusted copy of this date-time.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the date-time adjusted.
     * The adjustment takes place using the specified adjuster strategy object.
     * Read the documentation of the adjuster to understand what adjustment will be made.
     * <p>
     * A simple adjuster might simply set the one of the fields, such as the year field.
     * A more complex adjuster might set the date to the last day of the month.
     * A selection of common adjustments is provided in
     * {@link java.time.temporal.TemporalAdjusters TemporalAdjusters}.
     * These include finding the "last day of the month" and "next Wednesday".
     * Key date-time classes also implement the {@code TemporalAdjuster} interface,
     * such as {@link Month} and {@link java.time.MonthDay MonthDay}.
     * The adjuster is responsible for handling special cases, such as the varying
     * lengths of month and leap years.
     * <p>
     * For example this code returns a date on the last day of July:
     * <pre>
     *  import static java.time.Month.*;
     *  import static java.time.temporal.TemporalAdjusters.*;
     *
     *  result = zonedDateTime.with(JULY).with(lastDayOfMonth());
     * </pre>
     * <p>
     * The classes {@link LocalDate} and {@link LocalTime} implement {@code TemporalAdjuster},
     * thus this method can be used to change the date, time or offset:
     * <pre>
     *  result = zonedDateTime.with(date);
     *  result = zonedDateTime.with(time);
     * </pre>
     * <p>
     * {@link ZoneOffset} also implements {@code TemporalAdjuster} however using it
     * as an argument typically has no effect. The offset of a {@code ZonedDateTime} is
     * controlled primarily by the time-zone. As such, changing the offset does not generally
     * make sense, because there is only one valid offset for the local date-time and zone.
     * If the zoned date-time is in a daylight savings overlap, then the offset is used
     * to switch between the two valid offsets. In all other cases, the offset is ignored.
     * <p>
     * The result of this method is obtained by invoking the
     * {@link TemporalAdjuster#adjustInto(Temporal)} method on the
     * specified adjuster passing {@code this} as the argument.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param adjuster the adjuster to use, not null
     * @return a {@code ZonedDateTime} based on {@code this} with the adjustment made, not null
     * @throws DateTimeException if the adjustment cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime with(TemporalAdjuster adjuster) {
        // optimizations
        if (adjuster instanceof LocalDate) {
            return resolveLocal(LocalDateTime.of((LocalDate) adjuster, dateTime.toLocalTime()));
        } else if (adjuster instanceof LocalTime) {
            return resolveLocal(LocalDateTime.of(dateTime.toLocalDate(), (LocalTime) adjuster));
        } else if (adjuster instanceof LocalDateTime) {
            return resolveLocal((LocalDateTime) adjuster);
        } else if (adjuster instanceof OffsetDateTime odt) {
            return ofLocal(odt.toLocalDateTime(), zone, odt.getOffset());
        } else if (adjuster instanceof Instant instant) {
            return create(instant.getEpochSecond(), instant.getNano(), zone);
        } else if (adjuster instanceof ZoneOffset) {
            return resolveOffset((ZoneOffset) adjuster);
        }
        return (ZonedDateTime) adjuster.adjustInto(this);
    }

    /**
     * Returns a copy of this date-time with the specified field set to a new value.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the value
     * for the specified field changed.
     * This can be used to change any supported field, such as the year, month or day-of-month.
     * If it is not possible to set the value, because the field is not supported or for
     * some other reason, an exception is thrown.
     * <p>
     * In some cases, changing the specified field can cause the resulting date-time to become invalid,
     * such as changing the month from 31st January to February would make the day-of-month invalid.
     * In cases like this, the field is responsible for resolving the date. Typically it will choose
     * the previous valid date, which would be the last valid day of February in this example.
     * <p>
     * If the field is a {@link ChronoField} then the adjustment is implemented here.
     * <p>
     * The {@code INSTANT_SECONDS} field will return a date-time with the specified instant.
     * The zone and nano-of-second are unchanged.
     * The result will have an offset derived from the new instant and original zone.
     * If the new instant value is outside the valid range then a {@code DateTimeException} will be thrown.
     * <p>
     * The {@code OFFSET_SECONDS} field will typically be ignored.
     * The offset of a {@code ZonedDateTime} is controlled primarily by the time-zone.
     * As such, changing the offset does not generally make sense, because there is only
     * one valid offset for the local date-time and zone.
     * If the zoned date-time is in a daylight savings overlap, then the offset is used
     * to switch between the two valid offsets. In all other cases, the offset is ignored.
     * If the new offset value is outside the valid range then a {@code DateTimeException} will be thrown.
     * <p>
     * The other {@link #isSupported(TemporalField) supported fields} will behave as per
     * the matching method on {@link LocalDateTime#with(TemporalField, long) LocalDateTime}.
     * The zone is not part of the calculation and will be unchanged.
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
     * <p>
     * If the field is not a {@code ChronoField}, then the result of this method
     * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)}
     * passing {@code this} as the argument. In this case, the field determines
     * whether and how to adjust the instant.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param field  the field to set in the result, not null
     * @param newValue  the new value of the field in the result
     * @return a {@code ZonedDateTime} based on {@code this} with the specified field set, not null
     * @throws DateTimeException if the field cannot be set
     * @throws UnsupportedTemporalTypeException if the field is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime with(TemporalField field, long newValue) {
        if (field instanceof ChronoField chronoField) {
            return switch (chronoField) {
                case INSTANT_SECONDS -> create(newValue, getNano(), zone);
                case OFFSET_SECONDS -> {
                    ZoneOffset offset = ZoneOffset.ofTotalSeconds(chronoField.checkValidIntValue(newValue));
                    yield resolveOffset(offset);
                }
                default -> resolveLocal(dateTime.with(field, newValue));
            };
        }
        return field.adjustInto(this, newValue);
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the year altered.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#withYear(int) changing the year} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param year  the year to set in the result, from MIN_YEAR to MAX_YEAR
     * @return a {@code ZonedDateTime} based on this date-time with the requested year, not null
     * @throws DateTimeException if the year value is invalid
     */
    public ZonedDateTime withYear(int year) {
        return resolveLocal(dateTime.withYear(year));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the month-of-year altered.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#withMonth(int) changing the month} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param month  the month-of-year to set in the result, from 1 (January) to 12 (December)
     * @return a {@code ZonedDateTime} based on this date-time with the requested month, not null
     * @throws DateTimeException if the month-of-year value is invalid
     */
    public ZonedDateTime withMonth(int month) {
        return resolveLocal(dateTime.withMonth(month));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the day-of-month altered.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#withDayOfMonth(int) changing the day-of-month} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param dayOfMonth  the day-of-month to set in the result, from 1 to 28-31
     * @return a {@code ZonedDateTime} based on this date-time with the requested day, not null
     * @throws DateTimeException if the day-of-month value is invalid,
     *  or if the day-of-month is invalid for the month-year
     */
    public ZonedDateTime withDayOfMonth(int dayOfMonth) {
        return resolveLocal(dateTime.withDayOfMonth(dayOfMonth));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the day-of-year altered.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#withDayOfYear(int) changing the day-of-year} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param dayOfYear  the day-of-year to set in the result, from 1 to 365-366
     * @return a {@code ZonedDateTime} based on this date with the requested day, not null
     * @throws DateTimeException if the day-of-year value is invalid,
     *  or if the day-of-year is invalid for the year
     */
    public ZonedDateTime withDayOfYear(int dayOfYear) {
        return resolveLocal(dateTime.withDayOfYear(dayOfYear));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the hour-of-day altered.
     * <p>
     * This operates on the local time-line,
     * {@linkplain LocalDateTime#withHour(int) changing the time} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param hour  the hour-of-day to set in the result, from 0 to 23
     * @return a {@code ZonedDateTime} based on this date-time with the requested hour, not null
     * @throws DateTimeException if the hour value is invalid
     */
    public ZonedDateTime withHour(int hour) {
        return resolveLocal(dateTime.withHour(hour));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the minute-of-hour altered.
     * <p>
     * This operates on the local time-line,
     * {@linkplain LocalDateTime#withMinute(int) changing the time} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param minute  the minute-of-hour to set in the result, from 0 to 59
     * @return a {@code ZonedDateTime} based on this date-time with the requested minute, not null
     * @throws DateTimeException if the minute value is invalid
     */
    public ZonedDateTime withMinute(int minute) {
        return resolveLocal(dateTime.withMinute(minute));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the second-of-minute altered.
     * <p>
     * This operates on the local time-line,
     * {@linkplain LocalDateTime#withSecond(int) changing the time} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param second  the second-of-minute to set in the result, from 0 to 59
     * @return a {@code ZonedDateTime} based on this date-time with the requested second, not null
     * @throws DateTimeException if the second value is invalid
     */
    public ZonedDateTime withSecond(int second) {
        return resolveLocal(dateTime.withSecond(second));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the nano-of-second altered.
     * <p>
     * This operates on the local time-line,
     * {@linkplain LocalDateTime#withNano(int) changing the time} of the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param nanoOfSecond  the nano-of-second to set in the result, from 0 to 999,999,999
     * @return a {@code ZonedDateTime} based on this date-time with the requested nanosecond, not null
     * @throws DateTimeException if the nano value is invalid
     */
    public ZonedDateTime withNano(int nanoOfSecond) {
        return resolveLocal(dateTime.withNano(nanoOfSecond));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the time truncated.
     * <p>
     * Truncation returns a copy of the original date-time with fields
     * smaller than the specified unit set to zero.
     * For example, truncating with the {@link ChronoUnit#MINUTES minutes} unit
     * will set the second-of-minute and nano-of-second field to zero.
     * <p>
     * The unit must have a {@linkplain TemporalUnit#getDuration() duration}
     * that divides into the length of a standard day without remainder.
     * This includes all supplied time units on {@link ChronoUnit} and
     * {@link ChronoUnit#DAYS DAYS}. Other units throw an exception.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#truncatedTo(TemporalUnit) truncating}
     * the underlying local date-time. This is then converted back to a
     * {@code ZonedDateTime}, using the zone ID to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param unit  the unit to truncate to, not null
     * @return a {@code ZonedDateTime} based on this date-time with the time truncated, not null
     * @throws DateTimeException if unable to truncate
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     */
    public ZonedDateTime truncatedTo(TemporalUnit unit) {
        return resolveLocal(dateTime.truncatedTo(unit));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this date-time with the specified amount added.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the specified amount added.
     * The amount is typically {@link Period} or {@link Duration} but may be
     * any other type implementing the {@link TemporalAmount} interface.
     * <p>
     * The calculation is delegated to the amount object by calling
     * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free
     * to implement the addition in any way it wishes, however it typically
     * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation
     * of the amount implementation to determine if it can be successfully added.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToAdd  the amount to add, not null
     * @return a {@code ZonedDateTime} based on this date-time with the addition made, not null
     * @throws DateTimeException if the addition cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime plus(TemporalAmount amountToAdd) {
        if (amountToAdd instanceof Period periodToAdd) {
            return resolveLocal(dateTime.plus(periodToAdd));
        }
        Objects.requireNonNull(amountToAdd, "amountToAdd");
        return (ZonedDateTime) amountToAdd.addTo(this);
    }

    /**
     * Returns a copy of this date-time with the specified amount added.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the amount
     * in terms of the unit added. If it is not possible to add the amount, because the
     * unit is not supported or for some other reason, an exception is thrown.
     * <p>
     * If the field is a {@link ChronoUnit} then the addition is implemented here.
     * The zone is not part of the calculation and will be unchanged in the result.
     * The calculation for date and time units differ.
     * <p>
     * Date units operate on the local time-line.
     * The period is first added to the local date-time, then converted back
     * to a zoned date-time using the zone ID.
     * The conversion uses {@link #ofLocal(LocalDateTime, ZoneId, ZoneOffset)}
     * with the offset before the addition.
     * <p>
     * Time units operate on the instant time-line.
     * The period is first added to the local date-time, then converted back to
     * a zoned date-time using the zone ID.
     * The conversion uses {@link #ofInstant(LocalDateTime, ZoneOffset, ZoneId)}
     * with the offset before the addition.
     * <p>
     * If the field is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)}
     * passing {@code this} as the argument. In this case, the unit determines
     * whether and how to perform the addition.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToAdd  the amount of the unit to add to the result, may be negative
     * @param unit  the unit of the amount to add, not null
     * @return a {@code ZonedDateTime} based on this date-time with the specified amount added, not null
     * @throws DateTimeException if the addition cannot be made
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime plus(long amountToAdd, TemporalUnit unit) {
        if (unit instanceof ChronoUnit) {
            if (unit.isDateBased()) {
                return resolveLocal(dateTime.plus(amountToAdd, unit));
            } else {
                return resolveInstant(dateTime.plus(amountToAdd, unit));
            }
        }
        return unit.addTo(this, amountToAdd);
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of years added.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#plusYears(long) adding years} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param years  the years to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the years added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusYears(long years) {
        return resolveLocal(dateTime.plusYears(years));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of months added.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#plusMonths(long) adding months} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param months  the months to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the months added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusMonths(long months) {
        return resolveLocal(dateTime.plusMonths(months));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of weeks added.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#plusWeeks(long) adding weeks} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param weeks  the weeks to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the weeks added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusWeeks(long weeks) {
        return resolveLocal(dateTime.plusWeeks(weeks));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of days added.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#plusDays(long) adding days} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param days  the days to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the days added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusDays(long days) {
        return resolveLocal(dateTime.plusDays(days));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of hours added.
     * <p>
     * This operates on the instant time-line, such that adding one hour will
     * always be a duration of one hour later.
     * This may cause the local date-time to change by an amount other than one hour.
     * Note that this is a different approach to that used by days, months and years,
     * thus adding one day is not the same as adding 24 hours.
     * <p>
     * For example, consider a time-zone, such as 'Europe/Paris', where the
     * Autumn DST cutover means that the local times 02:00 to 02:59 occur twice
     * changing from offset +02:00 in summer to +01:00 in winter.
     * <ul>
     * <li>Adding one hour to 01:30+02:00 will result in 02:30+02:00
     *     (both in summer time)
     * <li>Adding one hour to 02:30+02:00 will result in 02:30+01:00
     *     (moving from summer to winter time)
     * <li>Adding one hour to 02:30+01:00 will result in 03:30+01:00
     *     (both in winter time)
     * <li>Adding three hours to 01:30+02:00 will result in 03:30+01:00
     *     (moving from summer to winter time)
     * </ul>
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param hours  the hours to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the hours added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusHours(long hours) {
        return resolveInstant(dateTime.plusHours(hours));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of minutes added.
     * <p>
     * This operates on the instant time-line, such that adding one minute will
     * always be a duration of one minute later.
     * This may cause the local date-time to change by an amount other than one minute.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param minutes  the minutes to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the minutes added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusMinutes(long minutes) {
        return resolveInstant(dateTime.plusMinutes(minutes));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of seconds added.
     * <p>
     * This operates on the instant time-line, such that adding one second will
     * always be a duration of one second later.
     * This may cause the local date-time to change by an amount other than one second.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param seconds  the seconds to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the seconds added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusSeconds(long seconds) {
        return resolveInstant(dateTime.plusSeconds(seconds));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of nanoseconds added.
     * <p>
     * This operates on the instant time-line, such that adding one nano will
     * always be a duration of one nano later.
     * This may cause the local date-time to change by an amount other than one nano.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param nanos  the nanos to add, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the nanoseconds added, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime plusNanos(long nanos) {
        return resolveInstant(dateTime.plusNanos(nanos));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this date-time with the specified amount subtracted.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the specified amount subtracted.
     * The amount is typically {@link Period} or {@link Duration} but may be
     * any other type implementing the {@link TemporalAmount} interface.
     * <p>
     * The calculation is delegated to the amount object by calling
     * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free
     * to implement the subtraction in any way it wishes, however it typically
     * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation
     * of the amount implementation to determine if it can be successfully subtracted.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToSubtract  the amount to subtract, not null
     * @return a {@code ZonedDateTime} based on this date-time with the subtraction made, not null
     * @throws DateTimeException if the subtraction cannot be made
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime minus(TemporalAmount amountToSubtract) {
        if (amountToSubtract instanceof Period periodToSubtract) {
            return resolveLocal(dateTime.minus(periodToSubtract));
        }
        Objects.requireNonNull(amountToSubtract, "amountToSubtract");
        return (ZonedDateTime) amountToSubtract.subtractFrom(this);
    }

    /**
     * Returns a copy of this date-time with the specified amount subtracted.
     * <p>
     * This returns a {@code ZonedDateTime}, based on this one, with the amount
     * in terms of the unit subtracted. If it is not possible to subtract the amount,
     * because the unit is not supported or for some other reason, an exception is thrown.
     * <p>
     * The calculation for date and time units differ.
     * <p>
     * Date units operate on the local time-line.
     * The period is first subtracted from the local date-time, then converted back
     * to a zoned date-time using the zone ID.
     * The conversion uses {@link #ofLocal(LocalDateTime, ZoneId, ZoneOffset)}
     * with the offset before the subtraction.
     * <p>
     * Time units operate on the instant time-line.
     * The period is first subtracted from the local date-time, then converted back to
     * a zoned date-time using the zone ID.
     * The conversion uses {@link #ofInstant(LocalDateTime, ZoneOffset, ZoneId)}
     * with the offset before the subtraction.
     * <p>
     * This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated.
     * See that method for a full description of how addition, and thus subtraction, works.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param amountToSubtract  the amount of the unit to subtract from the result, may be negative
     * @param unit  the unit of the amount to subtract, not null
     * @return a {@code ZonedDateTime} based on this date-time with the specified amount subtracted, not null
     * @throws DateTimeException if the subtraction cannot be made
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public ZonedDateTime minus(long amountToSubtract, TemporalUnit unit) {
        return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of years subtracted.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#minusYears(long) subtracting years} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param years  the years to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the years subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusYears(long years) {
        return (years == Long.MIN_VALUE ? plusYears(Long.MAX_VALUE).plusYears(1) : plusYears(-years));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of months subtracted.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#minusMonths(long) subtracting months} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param months  the months to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the months subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusMonths(long months) {
        return (months == Long.MIN_VALUE ? plusMonths(Long.MAX_VALUE).plusMonths(1) : plusMonths(-months));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of weeks subtracted.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#minusWeeks(long) subtracting weeks} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param weeks  the weeks to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the weeks subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusWeeks(long weeks) {
        return (weeks == Long.MIN_VALUE ? plusWeeks(Long.MAX_VALUE).plusWeeks(1) : plusWeeks(-weeks));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of days subtracted.
     * <p>
     * This operates on the local time-line,
     * {@link LocalDateTime#minusDays(long) subtracting days} to the local date-time.
     * This is then converted back to a {@code ZonedDateTime}, using the zone ID
     * to obtain the offset.
     * <p>
     * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap,
     * then the offset will be retained if possible, otherwise the earlier offset will be used.
     * If in a gap, the local date-time will be adjusted forward by the length of the gap.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param days  the days to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the days subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusDays(long days) {
        return (days == Long.MIN_VALUE ? plusDays(Long.MAX_VALUE).plusDays(1) : plusDays(-days));
    }

    //-----------------------------------------------------------------------
    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of hours subtracted.
     * <p>
     * This operates on the instant time-line, such that subtracting one hour will
     * always be a duration of one hour earlier.
     * This may cause the local date-time to change by an amount other than one hour.
     * Note that this is a different approach to that used by days, months and years,
     * thus subtracting one day is not the same as adding 24 hours.
     * <p>
     * For example, consider a time-zone, such as 'Europe/Paris', where the
     * Autumn DST cutover means that the local times 02:00 to 02:59 occur twice
     * changing from offset +02:00 in summer to +01:00 in winter.
     * <ul>
     * <li>Subtracting one hour from 03:30+01:00 will result in 02:30+01:00
     *     (both in winter time)
     * <li>Subtracting one hour from 02:30+01:00 will result in 02:30+02:00
     *     (moving from winter to summer time)
     * <li>Subtracting one hour from 02:30+02:00 will result in 01:30+02:00
     *     (both in summer time)
     * <li>Subtracting three hours from 03:30+01:00 will result in 01:30+02:00
     *     (moving from winter to summer time)
     * </ul>
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param hours  the hours to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the hours subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusHours(long hours) {
        return (hours == Long.MIN_VALUE ? plusHours(Long.MAX_VALUE).plusHours(1) : plusHours(-hours));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of minutes subtracted.
     * <p>
     * This operates on the instant time-line, such that subtracting one minute will
     * always be a duration of one minute earlier.
     * This may cause the local date-time to change by an amount other than one minute.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param minutes  the minutes to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the minutes subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusMinutes(long minutes) {
        return (minutes == Long.MIN_VALUE ? plusMinutes(Long.MAX_VALUE).plusMinutes(1) : plusMinutes(-minutes));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of seconds subtracted.
     * <p>
     * This operates on the instant time-line, such that subtracting one second will
     * always be a duration of one second earlier.
     * This may cause the local date-time to change by an amount other than one second.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param seconds  the seconds to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the seconds subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusSeconds(long seconds) {
        return (seconds == Long.MIN_VALUE ? plusSeconds(Long.MAX_VALUE).plusSeconds(1) : plusSeconds(-seconds));
    }

    /**
     * Returns a copy of this {@code ZonedDateTime} with the specified number of nanoseconds subtracted.
     * <p>
     * This operates on the instant time-line, such that subtracting one nano will
     * always be a duration of one nano earlier.
     * This may cause the local date-time to change by an amount other than one nano.
     * Note that this is a different approach to that used by days, months and years.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param nanos  the nanos to subtract, may be negative
     * @return a {@code ZonedDateTime} based on this date-time with the nanoseconds subtracted, not null
     * @throws DateTimeException if the result exceeds the supported date range
     */
    public ZonedDateTime minusNanos(long nanos) {
        return (nanos == Long.MIN_VALUE ? plusNanos(Long.MAX_VALUE).plusNanos(1) : plusNanos(-nanos));
    }

    //-----------------------------------------------------------------------
    /**
     * Queries this date-time using the specified query.
     * <p>
     * This queries this date-time using the specified query strategy object.
     * The {@code TemporalQuery} object defines the logic to be used to
     * obtain the result. Read the documentation of the query to understand
     * what the result of this method will be.
     * <p>
     * The result of this method is obtained by invoking the
     * {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the
     * specified query passing {@code this} as the argument.
     *
     * @param <R> the type of the result
     * @param query  the query to invoke, not null
     * @return the query result, null may be returned (defined by the query)
     * @throws DateTimeException if unable to query (defined by the query)
     * @throws ArithmeticException if numeric overflow occurs (defined by the query)
     */
    @SuppressWarnings("unchecked")
    @Override  // override for Javadoc
    public <R> R query(TemporalQuery<R> query) {
        if (query == TemporalQueries.localDate()) {
            return (R) toLocalDate();
        }
        return ChronoZonedDateTime.super.query(query);
    }

    /**
     * Calculates the amount of time until another date-time in terms of the specified unit.
     * <p>
     * This calculates the amount of time between two {@code ZonedDateTime}
     * objects in terms of a single {@code TemporalUnit}.
     * The start and end points are {@code this} and the specified date-time.
     * The result will be negative if the end is before the start.
     * For example, the amount in days between two date-times can be calculated
     * using {@code startDateTime.until(endDateTime, DAYS)}.
     * <p>
     * The {@code Temporal} passed to this method is converted to a
     * {@code ZonedDateTime} using {@link #from(TemporalAccessor)}.
     * If the time-zone differs between the two zoned date-times, the specified
     * end date-time is normalized to have the same zone as this date-time.
     * <p>
     * The calculation returns a whole number, representing the number of
     * complete units between the two date-times.
     * For example, the amount in months between 2012-06-15T00:00Z and 2012-08-14T23:59Z
     * will only be one month as it is one minute short of two months.
     * <p>
     * There are two equivalent ways of using this method.
     * The first is to invoke this method.
     * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
     * <pre>
     *   // these two lines are equivalent
     *   amount = start.until(end, MONTHS);
     *   amount = MONTHS.between(start, end);
     * </pre>
     * The choice should be made based on which makes the code more readable.
     * <p>
     * The calculation is implemented in this method for {@link ChronoUnit}.
     * The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS},
     * {@code MINUTES}, {@code HOURS} and {@code HALF_DAYS}, {@code DAYS},
     * {@code WEEKS}, {@code MONTHS}, {@code YEARS}, {@code DECADES},
     * {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS} are supported.
     * Other {@code ChronoUnit} values will throw an exception.
     * <p>
     * The calculation for date and time units differ.
     * <p>
     * Date units operate on the local time-line, using the local date-time.
     * For example, the period from noon on day 1 to noon the following day
     * in days will always be counted as exactly one day, irrespective of whether
     * there was a daylight savings change or not.
     * <p>
     * Time units operate on the instant time-line.
     * The calculation effectively converts both zoned date-times to instants
     * and then calculates the period between the instants.
     * For example, the period from noon on day 1 to noon the following day
     * in hours may be 23, 24 or 25 hours (or some other amount) depending on
     * whether there was a daylight savings change or not.
     * <p>
     * If the unit is not a {@code ChronoUnit}, then the result of this method
     * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
     * passing {@code this} as the first argument and the converted input temporal
     * as the second argument.
     * <p>
     * This instance is immutable and unaffected by this method call.
     *
     * @param endExclusive  the end date, exclusive, which is converted to a {@code ZonedDateTime}, not null
     * @param unit  the unit to measure the amount in, not null
     * @return the amount of time between this date-time and the end date-time
     * @throws DateTimeException if the amount cannot be calculated, or the end
     *  temporal cannot be converted to a {@code ZonedDateTime}
     * @throws UnsupportedTemporalTypeException if the unit is not supported
     * @throws ArithmeticException if numeric overflow occurs
     */
    @Override
    public long until(Temporal endExclusive, TemporalUnit unit) {
        ZonedDateTime end = ZonedDateTime.from(endExclusive);
        if (unit instanceof ChronoUnit) {
            ZonedDateTime start = this;
            try {
                end = end.withZoneSameInstant(zone);
            } catch (DateTimeException ex) {
                // end may be out of valid range. Adjust to end's zone.
                start = withZoneSameInstant(end.zone);
            }
            if (unit.isDateBased()) {
                return start.dateTime.until(end.dateTime, unit);
            } else {
                return start.toOffsetDateTime().until(end.toOffsetDateTime(), unit);
            }
        }
        return unit.between(this, end);
    }

    /**
     * Formats this date-time using the specified formatter.
     * <p>
     * This date-time will be passed to the formatter to produce a string.
     *
     * @param formatter  the formatter to use, not null
     * @return the formatted date-time string, not null
     * @throws DateTimeException if an error occurs during printing
     */
    @Override  // override for Javadoc and performance
    public String format(DateTimeFormatter formatter) {
        Objects.requireNonNull(formatter, "formatter");
        return formatter.format(this);
    }

    //-----------------------------------------------------------------------
    /**
     * Converts this date-time to an {@code OffsetDateTime}.
     * <p>
     * This creates an offset date-time using the local date-time and offset.
     * The zone ID is ignored.
     *
     * @return an offset date-time representing the same local date-time and offset, not null
     */
    public OffsetDateTime toOffsetDateTime() {
        return OffsetDateTime.of(dateTime, offset);
    }

    //-----------------------------------------------------------------------
    /**
     * Checks if this date-time is equal to another date-time.
     * <p>
     * The comparison is based on the offset date-time and the zone.
     * Only objects of type {@code ZonedDateTime} are compared, other types return false.
     *
     * @param obj  the object to check, null returns false
     * @return true if this is equal to the other date-time
     */
    @Override
    public boolean equals(Object obj) {
        if (this == obj) {
            return true;
        }
        return obj instanceof ZonedDateTime other
                && dateTime.equals(other.dateTime)
                && offset.equals(other.offset)
                && zone.equals(other.zone);
    }

    /**
     * A hash code for this date-time.
     *
     * @return a suitable hash code
     */
    @Override
    public int hashCode() {
        return dateTime.hashCode() ^ offset.hashCode() ^ Integer.rotateLeft(zone.hashCode(), 3);
    }

    //-----------------------------------------------------------------------
    /**
     * Outputs this date-time as a {@code String}, such as
     * {@code 2007-12-03T10:15:30+01:00[Europe/Paris]}.
     * <p>
     * The format consists of the {@code LocalDateTime} followed by the {@code ZoneOffset}.
     * If the {@code ZoneId} is not the same as the offset, then the ID is output.
     * The output is compatible with ISO-8601 if the offset and ID are the same,
     * and the seconds in the offset are zero.
     *
     * @return a string representation of this date-time, not null
     */
    @Override  // override for Javadoc
    public String toString() {
        String str = dateTime.toString() + offset.toString();
        if (offset != zone) {
            str += '[' + zone.toString() + ']';
        }
        return str;
    }

    //-----------------------------------------------------------------------
    /**
     * Writes the object using a
     * <a href="{@docRoot}/serialized-form.html#java.time.Ser">dedicated serialized form</a>.
     * @serialData
     * <pre>
     *  out.writeByte(6);  // identifies a ZonedDateTime
     *  // the <a href="{@docRoot}/serialized-form.html#java.time.LocalDateTime">dateTime</a> excluding the one byte header
     *  // the <a href="{@docRoot}/serialized-form.html#java.time.ZoneOffset">offset</a> excluding the one byte header
     *  // the <a href="{@docRoot}/serialized-form.html#java.time.ZoneId">zone ID</a> excluding the one byte header
     * </pre>
     *
     * @return the instance of {@code Ser}, not null
     */
    @java.io.Serial
    private Object writeReplace() {
        return new Ser(Ser.ZONE_DATE_TIME_TYPE, this);
    }

    /**
     * Defend against malicious streams.
     *
     * @param s the stream to read
     * @throws InvalidObjectException always
     */
    @java.io.Serial
    private void readObject(ObjectInputStream s) throws InvalidObjectException {
        throw new InvalidObjectException("Deserialization via serialization delegate");
    }

    void writeExternal(DataOutput out) throws IOException {
        dateTime.writeExternal(out);
        offset.writeExternal(out);
        zone.write(out);
    }

    static ZonedDateTime readExternal(ObjectInput in) throws IOException, ClassNotFoundException {
        LocalDateTime dateTime = LocalDateTime.readExternal(in);
        ZoneOffset offset = ZoneOffset.readExternal(in);
        ZoneId zone = (ZoneId) Ser.read(in);
        return ZonedDateTime.ofLenient(dateTime, offset, zone);
    }

}