src/java.base/share/classes/java/nio/X-Buffer.java.template - master - githubmirror/jdk22

src/java.base/share/classes/java/nio/X-Buffer.java.template
2 356 строк82 KB
Per Minborg
8317886: Add @sealedGraph to ByteBuffer
18 окт 2023, 09:18
18 окт 2023, 09:188dd8096
/*
 * Copyright (c) 2000, 2023, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */

#warn This file is preprocessed before being compiled

package java.nio;

#if[char]
import java.io.IOException;
#end[char]
import java.lang.ref.Reference;
#if[streamableType]
import java.util.Spliterator;
import java.util.stream.StreamSupport;
import java.util.stream.$Streamtype$Stream;
#end[streamableType]

import java.lang.foreign.MemorySegment;
import java.util.Objects;
import jdk.internal.util.ArraysSupport;

/**
 * $A$ $type$ buffer.
 *
 * <p> This class defines {#if[byte]?six:four} categories of operations upon
 * $type$ buffers:
 *
 * <ul>
 *
 *   <li><p> Absolute and relative {@link #get() <i>get</i>} and
 *   {@link #put($type$) <i>put</i>} methods that read and write
 *   single $type$s; </p></li>
 *
 *   <li><p> Absolute and relative {@link #get($type$[]) <i>bulk get</i>}
 *   methods that transfer contiguous sequences of $type$s from this buffer
 *   into an array;</p></li>
 *
 *   <li><p> Absolute and relative {@link #put($type$[]) <i>bulk put</i>}
 *   methods that transfer contiguous sequences of $type$s from $a$
 *   $type$ array{#if[char]?, a string,} or some other $type$
 *   buffer into this buffer;</p></li>
 *
#if[byte]
 *
 *   <li><p> Absolute and relative {@link #getChar() <i>get</i>}
 *   and {@link #putChar(char) <i>put</i>} methods that read and
 *   write values of other primitive types, translating them to and from
 *   sequences of bytes in a particular byte order; </p></li>
 *
 *   <li><p> Methods for creating <i><a href="#views">view buffers</a></i>,
 *   which allow a byte buffer to be viewed as a buffer containing values of
 *   some other primitive type; and </p></li>
 *
#end[byte]
 *
 *   <li><p> A method for {@link #compact compacting}
 *   $a$ $type$ buffer.  </p></li>
 *
 * </ul>
 *
 * <p> $Type$ buffers can be created either by {@link #allocate
 * <i>allocation</i>}, which allocates space for the buffer's
 *
#if[byte]
 *
 * content, or by {@link #wrap($type$[]) <i>wrapping</i>} an
 * existing $type$ array into a buffer.
 *
#else[byte]
 *
 * content, by {@link #wrap($type$[]) <i>wrapping</i>} an existing
 * $type$ array {#if[char]?or string} into a buffer, or by creating a
 * <a href="ByteBuffer.html#views"><i>view</i></a> of an existing byte buffer.
 *
#end[byte]
 *
#if[byte]
 *
 * <a id="direct"></a>
 * <h2> Direct <i>vs.</i> non-direct buffers </h2>
 *
 * <p> A byte buffer is either <i>direct</i> or <i>non-direct</i>.  Given a
 * direct byte buffer, the Java virtual machine will make a best effort to
 * perform native I/O operations directly upon it.  That is, it will attempt to
 * avoid copying the buffer's content to (or from) an intermediate buffer
 * before (or after) each invocation of one of the underlying operating
 * system's native I/O operations.
 *
 * <p> A direct byte buffer may be created by invoking the {@link
 * #allocateDirect(int) allocateDirect} factory method of this class.  The
 * buffers returned by this method typically have somewhat higher allocation
 * and deallocation costs than non-direct buffers.  The contents of direct
 * buffers may reside outside of the normal garbage-collected heap, and so
 * their impact upon the memory footprint of an application might not be
 * obvious.  It is therefore recommended that direct buffers be allocated
 * primarily for large, long-lived buffers that are subject to the underlying
 * system's native I/O operations.  In general it is best to allocate direct
 * buffers only when they yield a measurable gain in program performance.
 *
 * <p> A direct byte buffer may also be created by {@link
 * java.nio.channels.FileChannel#map mapping} a region of a file
 * directly into memory.  An implementation of the Java platform may optionally
 * support the creation of direct byte buffers from native code via JNI.  If an
 * instance of one of these kinds of buffers refers to an inaccessible region
 * of memory then an attempt to access that region will not change the buffer's
 * content and will cause an unspecified exception to be thrown either at the
 * time of the access or at some later time.
 *
 * <p> Whether a byte buffer is direct or non-direct may be determined by
 * invoking its {@link #isDirect isDirect} method.  This method is provided so
 * that explicit buffer management can be done in performance-critical code.
 *
 *
 * <a id="bin"></a>
 * <h2> Access to binary data </h2>
 *
 * <p> This class defines methods for reading and writing values of all other
 * primitive types, except {@code boolean}.  Primitive values are translated
 * to (or from) sequences of bytes according to the buffer's current byte
 * order, which may be retrieved and modified via the {@link #order order}
 * methods.  Specific byte orders are represented by instances of the {@link
 * ByteOrder} class.  The initial order of a byte buffer is always {@link
 * ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
 *
 * <p> For access to heterogeneous binary data, that is, sequences of values of
 * different types, this class defines a family of absolute and relative
 * <i>get</i> and <i>put</i> methods for each type.  For 32-bit floating-point
 * values, for example, this class defines:
 *
 * {@snippet lang=java :
 *     // @link substring="getFloat()" target="#getFloat" :
 *     float      getFloat()
 *     // @link substring="getFloat(int index)" target="#getFloat(int)" :
 *     float      getFloat(int index)
 *     // @link substring="putFloat(float f)" target="#putFloat(float)" :
 *     ByteBuffer putFloat(float f)
 *     // @link substring="putFloat(int index, float f)" target="#putFloat(int,float)" :
 *     ByteBuffer putFloat(int index, float f)
 * }
 *
 * <p> Corresponding methods are defined for the types {@code char,
 * short, int, long}, and {@code double}.  The index
 * parameters of the absolute <i>get</i> and <i>put</i> methods are in terms of
 * bytes rather than of the type being read or written.
 *
 * <a id="views"></a>
 *
 * <p> For access to homogeneous binary data, that is, sequences of values of
 * the same type, this class defines methods that can create <i>views</i> of a
 * given byte buffer.  A <i>view buffer</i> is simply another buffer whose
 * content is backed by the byte buffer.  Changes to the byte buffer's content
 * will be visible in the view buffer, and vice versa; the two buffers'
 * position, limit, and mark values are independent.  The {@link
 * #asFloatBuffer() asFloatBuffer} method, for example, creates an instance of
 * the {@link FloatBuffer} class that is backed by the byte buffer upon which
 * the method is invoked.  Corresponding view-creation methods are defined for
 * the types {@code char, short, int, long}, and {@code double}.
 *
 * <p> View buffers have three important advantages over the families of
 * type-specific <i>get</i> and <i>put</i> methods described above:
 *
 * <ul>
 *
 *   <li><p> A view buffer is indexed not in terms of bytes but rather in terms
 *   of the type-specific size of its values;  </p></li>
 *
 *   <li><p> A view buffer provides relative bulk <i>get</i> and <i>put</i>
 *   methods that can transfer contiguous sequences of values between a buffer
 *   and an array or some other buffer of the same type; and  </p></li>
 *
 *   <li><p> A view buffer is potentially much more efficient because it will
 *   be direct if, and only if, its backing byte buffer is direct.  </p></li>
 *
 * </ul>
 *
 * <p> The byte order of a view buffer is fixed to be that of its byte buffer
 * at the time that the view is created.  </p>
 *
#end[byte]
*
#if[!byte]
 *
 * <p> Like a byte buffer, $a$ $type$ buffer is either <a
 * href="ByteBuffer.html#direct"><i>direct</i> or <i>non-direct</i></a>.  A
 * $type$ buffer created via the {@code wrap} methods of this class will
 * be non-direct.  $A$ $type$ buffer created as a view of a byte buffer will
 * be direct if, and only if, the byte buffer itself is direct.  Whether or not
 * $a$ $type$ buffer is direct may be determined by invoking the {@link
 * #isDirect isDirect} method.  </p>
 *
#end[!byte]
*
#if[char]
 *
 * <p> This class implements the {@link CharSequence} interface so that
 * character buffers may be used wherever character sequences are accepted, for
 * example in the regular-expression package {@link java.util.regex}.
 * The methods defined by {@code CharSequence} operate relative to the current
 * position of the buffer when they are invoked.
 * </p>
 *
#end[char]
 *
#if[byte]
 * <h2> Invocation chaining </h2>
#end[byte]
 *
 * <p> Methods in this class that do not otherwise have a value to return are
 * specified to return the buffer upon which they are invoked.  This allows
 * method invocations to be chained.
 *
#if[byte]
 *
 * The sequence of statements
 *
 * {@snippet lang=java :
 *     bb.putInt(0xCAFEBABE);
 *     bb.putShort(3);
 *     bb.putShort(45);
 * }
 *
 * can, for example, be replaced by the single statement
 *
 * {@snippet lang=java :
 *     bb.putInt(0xCAFEBABE).putShort(3).putShort(45);
 * }
 *
#end[byte]
#if[char]
 *
 * The sequence of statements
 *
 * {@snippet lang=java :
 *     cb.put("text/");
 *     cb.put(subtype);
 *     cb.put("; charset=");
 *     cb.put(enc);
 * }
 *
 * can, for example, be replaced by the single statement
 *
 * {@snippet lang=java :
 *     cb.put("text/").put(subtype).put("; charset=").put(enc);
 * }
 *
#end[char]
 * <h2> Optional operations </h2>
 * Methods specified as
 * <i>{@linkplain Buffer##read-only-buffers-heading optional
 * operations}</i> throw a {@linkplain ReadOnlyBufferException} when invoked
 * on a {@linkplain java.nio.Buffer#isReadOnly read-only} $Type$Buffer. The
 * methods {@linkplain #array array} and {@linkplain #arrayOffset arrayOffset}
 * throw an {@linkplain UnsupportedOperationException} if the $Type$Buffer is
 * not backed by an {@linkplain Buffer#hasArray accessible $type$ array}
 * (irrespective of whether the $Type$Buffer is read-only).
 *
 *
 * @author Mark Reinhold
 * @author JSR-51 Expert Group
#if[byte]
 * @sealedGraph
#end[byte]
 * @since 1.4
 */

public abstract sealed class $Type$Buffer
    extends Buffer
    implements Comparable<$Type$Buffer>{#if[char]?, Appendable, CharSequence, Readable}
    permits
#if[byte]
    Heap$Type$Buffer, MappedByteBuffer
#else[byte]
#if[char]
    StringCharBuffer,
#end[char]
    Heap$Type$Buffer, Direct$Type$BufferS, Direct$Type$BufferU,
    ByteBufferAs$Type$BufferB, ByteBufferAs$Type$BufferL
#end[byte]
{
    // Cached array base offset
    private static final long ARRAY_BASE_OFFSET = UNSAFE.arrayBaseOffset($type$[].class);

    // These fields are declared here rather than in Heap-X-Buffer in order to
    // reduce the number of virtual method invocations needed to access these
    // values, which is especially costly when coding small buffers.
    //
    final $type$[] hb;                  // Non-null only for heap buffers
    final int offset;
    boolean isReadOnly;

    // Creates a new buffer with the given mark, position, limit, capacity,
    // backing array, and array offset
    //
    $Type$Buffer(int mark, int pos, int lim, int cap,   // package-private
                 $type$[] hb, int offset, MemorySegment segment)
    {
        super(mark, pos, lim, cap, segment);
        this.hb = hb;
        this.offset = offset;
    }

    // Creates a new buffer with the given mark, position, limit, and capacity
    //
    $Type$Buffer(int mark, int pos, int lim, int cap, MemorySegment segment) { // package-private
        this(mark, pos, lim, cap, null, 0, segment);
    }

    // Creates a new buffer with given base, address and capacity
    //
    $Type$Buffer($type$[] hb, long addr, int cap, MemorySegment segment) { // package-private
        super(addr, cap, segment);
        this.hb = hb;
        this.offset = 0;
    }

    @Override
    Object base() {
        return hb;
    }

#if[byte]

    /**
     * Allocates a new direct $type$ buffer.
     *
     * <p> The new buffer's position will be zero, its limit will be its
     * capacity, its mark will be undefined, each of its elements will be
     * initialized to zero, and its byte order will be
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.  Whether or not it has a
     * {@link #hasArray backing array} is unspecified.
     *
     * @param  capacity
     *         The new buffer's capacity, in $type$s
     *
     * @return  The new $type$ buffer
     *
     * @throws  IllegalArgumentException
     *          If the {@code capacity} is a negative integer
     */
    public static $Type$Buffer allocateDirect(int capacity) {
        return new Direct$Type$Buffer(capacity);
    }

#end[byte]

    /**
     * Allocates a new $type$ buffer.
     *
     * <p> The new buffer's position will be zero, its limit will be its
     * capacity, its mark will be undefined, each of its elements will be
     * initialized to zero, and its byte order will be
#if[byte]
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * the {@link ByteOrder#nativeOrder native order} of the underlying
     * hardware.
#end[byte]
     * It will have a {@link #array backing array}, and its
     * {@link #arrayOffset array offset} will be zero.
     *
     * @param  capacity
     *         The new buffer's capacity, in $type$s
     *
     * @return  The new $type$ buffer
     *
     * @throws  IllegalArgumentException
     *          If the {@code capacity} is a negative integer
     */
    public static $Type$Buffer allocate(int capacity) {
        if (capacity < 0)
            throw createCapacityException(capacity);
        return new Heap$Type$Buffer(capacity, capacity, null);
    }

    /**
     * Wraps $a$ $type$ array into a buffer.
     *
     * <p> The new buffer will be backed by the given $type$ array;
     * that is, modifications to the buffer will cause the array to be modified
     * and vice versa.  The new buffer's capacity will be
     * {@code array.length}, its position will be {@code offset}, its limit
     * will be {@code offset + length}, its mark will be undefined, and its
     * byte order will be
#if[byte]
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * the {@link ByteOrder#nativeOrder native order} of the underlying
     * hardware.
#end[byte]
     * Its {@link #array backing array} will be the given array, and
     * its {@link #arrayOffset array offset} will be zero.  </p>
     *
     * @param  array
     *         The array that will back the new buffer
     *
     * @param  offset
     *         The offset of the subarray to be used; must be non-negative and
     *         no larger than {@code array.length}.  The new buffer's position
     *         will be set to this value.
     *
     * @param  length
     *         The length of the subarray to be used;
     *         must be non-negative and no larger than
     *         {@code array.length - offset}.
     *         The new buffer's limit will be set to {@code offset + length}.
     *
     * @return  The new $type$ buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code offset} and {@code length}
     *          parameters do not hold
     */
    public static $Type$Buffer wrap($type$[] array,
                                    int offset, int length)
    {
        try {
            return new Heap$Type$Buffer(array, offset, length, null);
        } catch (IllegalArgumentException x) {
            throw new IndexOutOfBoundsException();
        }
    }

    /**
     * Wraps $a$ $type$ array into a buffer.
     *
     * <p> The new buffer will be backed by the given $type$ array;
     * that is, modifications to the buffer will cause the array to be modified
     * and vice versa.  The new buffer's capacity and limit will be
     * {@code array.length}, its position will be zero, its mark will be
     * undefined, and its byte order will be
#if[byte]
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * the {@link ByteOrder#nativeOrder native order} of the underlying
     * hardware.
#end[byte]
     * Its {@link #array backing array} will be the given array, and its
     * {@link #arrayOffset array offset} will be zero.  </p>
     *
     * @param  array
     *         The array that will back this buffer
     *
     * @return  The new $type$ buffer
     */
    public static $Type$Buffer wrap($type$[] array) {
        return wrap(array, 0, array.length);
    }

#if[char]

    /**
     * Attempts to read characters into the specified character buffer.
     * The buffer is used as a repository of characters as-is: the only
     * changes made are the results of a put operation. No flipping or
     * rewinding of the buffer is performed. If the {@linkplain #length
     * length} of the specified character buffer is zero, then no characters
     * will be read and zero will be returned.
     *
     * @param target the buffer to read characters into
     * @return The number of characters added to the buffer,
     *         possibly zero, or -1 if this source of characters is at its end
     * @throws IOException if an I/O error occurs
     * @throws ReadOnlyBufferException if target is a read only buffer,
     *         even if its length is zero
     * @since 1.5
     */
    public int read(CharBuffer target) throws IOException {
        // Determine the number of bytes n that can be transferred
        int limit = limit();
        int pos = position();
        int remaining = limit - pos;
        assert remaining >= 0;
        if (remaining <= 0) // include equality condition when remaining == 0
            return -1;

        int targetRemaining = target.remaining();
        assert targetRemaining >= 0;
        if (targetRemaining <= 0) // include condition targetRemaining == 0
            return 0;

        int n = Math.min(remaining, targetRemaining);

        // Set source limit to prevent target overflow
        if (targetRemaining < remaining)
            limit(pos + n);
        try {
            if (n > 0)
                target.put(this);
        } finally {
            limit(limit); // restore real limit
        }
        return n;
    }

    /**
     * Wraps a character sequence into a buffer.
     *
     * <p> The content of the new, read-only buffer will be the content of the
     * given character sequence.  The buffer's capacity will be
     * {@code csq.length()}, its position will be {@code start}, its limit
     * will be {@code end}, and its mark will be undefined.  </p>
     *
     * @param  csq
     *         The character sequence from which the new character buffer is to
     *         be created
     *
     * @param  start
     *         The index of the first character to be used;
     *         must be non-negative and no larger than {@code csq.length()}.
     *         The new buffer's position will be set to this value.
     *
     * @param  end
     *         The index of the character following the last character to be
     *         used; must be no smaller than {@code start} and no larger
     *         than {@code csq.length()}.
     *         The new buffer's limit will be set to this value.
     *
     * @return  The new character buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code start} and {@code end}
     *          parameters do not hold
     */
    public static CharBuffer wrap(CharSequence csq, int start, int end) {
        try {
            return new StringCharBuffer(csq, start, end);
        } catch (IllegalArgumentException x) {
            throw new IndexOutOfBoundsException();
        }
    }

    /**
     * Wraps a character sequence into a buffer.
     *
     * <p> The content of the new, read-only buffer will be the content of the
     * given character sequence.  The new buffer's capacity and limit will be
     * {@code csq.length()}, its position will be zero, and its mark will be
     * undefined.  </p>
     *
     * @param  csq
     *         The character sequence from which the new character buffer is to
     *         be created
     *
     * @return  The new character buffer
     */
    public static CharBuffer wrap(CharSequence csq) {
        return wrap(csq, 0, csq.length());
    }

#end[char]

    /**
     * Creates a new $type$ buffer whose content is a shared subsequence of
     * this buffer's content.
     *
     * <p> The content of the new buffer will start at this buffer's current
     * position.  Changes to this buffer's content will be visible in the new
     * buffer, and vice versa; the two buffers' position, limit, and mark
     * values will be independent.
     *
     * <p> The new buffer's position will be zero, its capacity and its limit
     * will be the number of $type$s remaining in this buffer, its mark will be
     * undefined, and its byte order will be
#if[byte]
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * identical to that of this buffer.
#end[byte]
     * The new buffer will be direct if, and only if, this buffer is direct, and
     * it will be read-only if, and only if, this buffer is read-only.  </p>
     *
     * @return  The new $type$ buffer
#if[byte]
     *
     * @see #alignedSlice(int)
#end[byte]
     */
    @Override
    public abstract $Type$Buffer slice();

    /**
     * Creates a new $type$ buffer whose content is a shared subsequence of
     * this buffer's content.
     *
     * <p> The content of the new buffer will start at position {@code index}
     * in this buffer, and will contain {@code length} elements. Changes to
     * this buffer's content will be visible in the new buffer, and vice versa;
     * the two buffers' position, limit, and mark values will be independent.
     *
     * <p> The new buffer's position will be zero, its capacity and its limit
     * will be {@code length}, its mark will be undefined, and its byte order
     * will be
#if[byte]
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * identical to that of this buffer.
#end[byte]
     * The new buffer will be direct if, and only if, this buffer is direct,
     * and it will be read-only if, and only if, this buffer is read-only. </p>
     *
     * @param   index
     *          The position in this buffer at which the content of the new
     *          buffer will start; must be non-negative and no larger than
     *          {@link #limit() limit()}
     *
     * @param   length
     *          The number of elements the new buffer will contain; must be
     *          non-negative and no larger than {@code limit() - index}
     *
     * @return  The new buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code index} is negative or greater than {@code limit()},
     *          {@code length} is negative, or {@code length > limit() - index}
     *
     * @since 13
     */
    @Override
    public abstract $Type$Buffer slice(int index, int length);

    /**
     * Creates a new $type$ buffer that shares this buffer's content.
     *
     * <p> The content of the new buffer will be that of this buffer.  Changes
     * to this buffer's content will be visible in the new buffer, and vice
     * versa; the two buffers' position, limit, and mark values will be
     * independent.
     *
     * <p> The new buffer's capacity, limit, position,
#if[byte]
     * and mark values will be identical to those of this buffer, and its byte
     * order will be {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * mark values, and byte order will be identical to those of this buffer.
#end[byte]
     * The new buffer will be direct if, and only if, this buffer is direct, and
     * it will be read-only if, and only if, this buffer is read-only.  </p>
     *
     * @return  The new $type$ buffer
     */
    @Override
    public abstract $Type$Buffer duplicate();

    /**
     * Creates a new, read-only $type$ buffer that shares this buffer's
     * content.
     *
     * <p> The content of the new buffer will be that of this buffer.  Changes
     * to this buffer's content will be visible in the new buffer; the new
     * buffer itself, however, will be read-only and will not allow the shared
     * content to be modified.  The two buffers' position, limit, and mark
     * values will be independent.
     *
     * <p> The new buffer's capacity, limit, position,
#if[byte]
     * and mark values will be identical to those of this buffer, and its byte
     * order will be {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
#else[byte]
     * mark values, and byte order will be identical to those of this buffer.
#end[byte]
     *
     * <p> If this buffer is itself read-only then this method behaves in
     * exactly the same way as the {@link #duplicate duplicate} method.  </p>
     *
     * @return  The new, read-only $type$ buffer
     */
    public abstract $Type$Buffer asReadOnlyBuffer();


    // -- Singleton get/put methods --

    /**
     * Relative <i>get</i> method.  Reads the $type$ at this buffer's
     * current position, and then increments the position.
     *
     * @return  The $type$ at the buffer's current position
     *
     * @throws  BufferUnderflowException
     *          If the buffer's current position is not smaller than its limit
     */
    public abstract $type$ get();

    /**
     * Relative <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> Writes the given $type$ into this buffer at the current
     * position, and then increments the position. </p>
     *
     * @param  $x$
     *         The $type$ to be written
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If this buffer's current position is not smaller than its limit
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public abstract $Type$Buffer put($type$ $x$);

    /**
     * Absolute <i>get</i> method.  Reads the $type$ at the given
     * index.
     *
     * @param  index
     *         The index from which the $type$ will be read
     *
     * @return  The $type$ at the given index
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code index} is negative
     *          or not smaller than the buffer's limit
     */
    public abstract $type$ get(int index);

#if[streamableType]
    /**
     * Absolute <i>get</i> method.  Reads the $type$ at the given
     * index without any validation of the index.
     *
     * @param  index
     *         The index from which the $type$ will be read
     *
     * @return  The $type$ at the given index
     */
    abstract $type$ getUnchecked(int index);   // package-private
#end[streamableType]

    /**
     * Absolute <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> Writes the given $type$ into this buffer at the given
     * index. </p>
     *
     * @param  index
     *         The index at which the $type$ will be written
     *
     * @param  $x$
     *         The $type$ value to be written
     *
     * @return  This buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code index} is negative
     *          or not smaller than the buffer's limit
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public abstract $Type$Buffer put(int index, $type$ $x$);


    // -- Bulk get operations --

    /**
     * Relative bulk <i>get</i> method.
     *
     * <p> This method transfers $type$s from this buffer into the given
     * destination array.  If there are fewer $type$s remaining in the
     * buffer than are required to satisfy the request, that is, if
     * {@code length}&nbsp;{@code >}&nbsp;{@code remaining()}, then no
     * $type$s are transferred and a {@link BufferUnderflowException} is
     * thrown.
     *
     * <p> Otherwise, this method copies {@code length} $type$s from this
     * buffer into the given array, starting at the current position of this
     * buffer and at the given offset in the array.  The position of this
     * buffer is then incremented by {@code length}.
     *
     * <p> In other words, an invocation of this method of the form
     * <code>src.get(dst,&nbsp;off,&nbsp;len)</code> has exactly the same effect as
     * the loop
     *
     * {@snippet lang=java :
     *     for (int i = off; i < off + len; i++)
     *         dst[i] = src.get();
     * }
     *
     * except that it first checks that there are sufficient $type$s in
     * this buffer and it is potentially much more efficient.
     *
     * @param  dst
     *         The array into which $type$s are to be written
     *
     * @param  offset
     *         The offset within the array of the first $type$ to be
     *         written; must be non-negative and no larger than
     *         {@code dst.length}
     *
     * @param  length
     *         The maximum number of $type$s to be written to the given
     *         array; must be non-negative and no larger than
     *         {@code dst.length - offset}
     *
     * @return  This buffer
     *
     * @throws  BufferUnderflowException
     *          If there are fewer than {@code length} $type$s
     *          remaining in this buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code offset} and {@code length}
     *          parameters do not hold
     */
    public $Type$Buffer get($type$[] dst, int offset, int length) {
        Objects.checkFromIndexSize(offset, length, dst.length);
        int pos = position();
        if (length > limit() - pos)
            throw new BufferUnderflowException();

        getArray(pos, dst, offset, length);

        position(pos + length);
        return this;
    }

    /**
     * Relative bulk <i>get</i> method.
     *
     * <p> This method transfers $type$s from this buffer into the given
     * destination array.  An invocation of this method of the form
     * {@code src.get(a)} behaves in exactly the same way as the invocation
     *
     * {@snippet lang=java :
     *     src.get(a, 0, a.length)
     * }
     *
     * @param   dst
     *          The destination array
     *
     * @return  This buffer
     *
     * @throws  BufferUnderflowException
     *          If there are fewer than {@code length} $type$s
     *          remaining in this buffer
     */
    public $Type$Buffer get($type$[] dst) {
        return get(dst, 0, dst.length);
    }

    /**
     * Absolute bulk <i>get</i> method.
     *
     * <p> This method transfers {@code length} $type$s from this
     * buffer into the given array, starting at the given index in this
     * buffer and at the given offset in the array.  The position of this
     * buffer is unchanged.
     *
     * <p> An invocation of this method of the form
     * <code>src.get(index,&nbsp;dst,&nbsp;offset,&nbsp;length)</code>
     * has exactly the same effect as the following loop except that it first
     * checks the consistency of the supplied parameters and it is potentially
     * much more efficient:
     *
     * {@snippet lang=java :
     *     for (int i = offset, j = index; i < offset + length; i++, j++)
     *         dst[i] = src.get(j);
     * }
     *
     * @param  index
     *         The index in this buffer from which the first $type$ will be
     *         read; must be non-negative and less than {@code limit()}
     *
     * @param  dst
     *         The destination array
     *
     * @param  offset
     *         The offset within the array of the first $type$ to be
     *         written; must be non-negative and less than
     *         {@code dst.length}
     *
     * @param  length
     *         The number of $type$s to be written to the given array;
     *         must be non-negative and no larger than the smaller of
     *         {@code limit() - index} and {@code dst.length - offset}
     *
     * @return  This buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code index}, {@code offset}, and
     *          {@code length} parameters do not hold
     *
     * @since 13
     */
    public $Type$Buffer get(int index, $type$[] dst, int offset, int length) {
        Objects.checkFromIndexSize(index, length, limit());
        Objects.checkFromIndexSize(offset, length, dst.length);

        getArray(index, dst, offset, length);

        return this;
    }

    /**
     * Absolute bulk <i>get</i> method.
     *
     * <p> This method transfers $type$s from this buffer into the given
     * destination array.  The position of this buffer is unchanged.  An
     * invocation of this method of the form
     * <code>src.get(index,&nbsp;dst)</code> behaves in exactly the same
     * way as the invocation:
     *
     * {@snippet lang=java :
     *     src.get(index, dst, 0, dst.length)
     * }
     *
     * @param  index
     *         The index in this buffer from which the first $type$ will be
     *         read; must be non-negative and less than {@code limit()}
     *
     * @param  dst
     *         The destination array
     *
     * @return  This buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code index} is negative, not smaller than {@code limit()},
     *          or {@code limit() - index < dst.length}
     *
     * @since 13
     */
    public $Type$Buffer get(int index, $type$[] dst) {
        return get(index, dst, 0, dst.length);
    }

    private $Type$Buffer getArray(int index, $type$[] dst, int offset, int length) {
        if (
#if[char]
            isAddressable() &&
#end[char]
            ((long)length << $LG_BYTES_PER_VALUE$) > Bits.JNI_COPY_TO_ARRAY_THRESHOLD) {
            long bufAddr = address + ((long)index << $LG_BYTES_PER_VALUE$);
            long dstOffset =
                ARRAY_BASE_OFFSET + ((long)offset << $LG_BYTES_PER_VALUE$);
            long len = (long)length << $LG_BYTES_PER_VALUE$;

            try {
#if[!byte]
                if (order() != ByteOrder.nativeOrder())
                    SCOPED_MEMORY_ACCESS.copySwapMemory(
                            session(), null, base(), bufAddr,
                            dst, dstOffset, len, $Fulltype$.BYTES);
                else
#end[!byte]
                    SCOPED_MEMORY_ACCESS.copyMemory(
                            session(), null, base(), bufAddr,
                            dst, dstOffset, len);
            } finally {
                Reference.reachabilityFence(this);
            }
        } else {
            int end = offset + length;
            for (int i = offset, j = index; i < end; i++, j++) {
                dst[i] = get(j);
            }
        }
        return this;
    }

    // -- Bulk put operations --

    /**
     * Relative bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers the $type$s remaining in the given source
     * buffer into this buffer.  If there are more $type$s remaining in the
     * source buffer than in this buffer, that is, if
     * {@code src.remaining()}&nbsp;{@code >}&nbsp;{@code remaining()},
     * then no $type$s are transferred and a {@link
     * BufferOverflowException} is thrown.
     *
     * <p> Otherwise, this method copies
     * <i>n</i>&nbsp;=&nbsp;{@code src.remaining()} $type$s from the given
     * buffer into this buffer, starting at each buffer's current position.
     * The positions of both buffers are then incremented by <i>n</i>.
     *
     * <p> In other words, an invocation of this method of the form
     * {@code dst.put(src)} has exactly the same effect as the loop
     *
     * {@snippet lang=java :
     *     while (src.hasRemaining())
     *         dst.put(src.get());
     * }
     *
     * except that it first checks that there is sufficient space in this
     * buffer and it is potentially much more efficient.  If this buffer and
     * the source buffer share the same backing array or memory, then the
     * result will be as if the source elements were first copied to an
     * intermediate location before being written into this buffer.
     *
     * @param  src
     *         The source buffer from which $type$s are to be read;
     *         must not be this buffer
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *          for the remaining $type$s in the source buffer
     *
     * @throws  IllegalArgumentException
     *          If the source buffer is this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public $Type$Buffer put($Type$Buffer src) {
        if (src == this)
            throw createSameBufferException();
        if (isReadOnly())
            throw new ReadOnlyBufferException();

        int srcPos = src.position();
        int srcLim = src.limit();
        int srcRem = (srcPos <= srcLim ? srcLim - srcPos : 0);
        int pos = position();
        int lim = limit();
        int rem = (pos <= lim ? lim - pos : 0);

        if (srcRem > rem)
            throw new BufferOverflowException();

        putBuffer(pos, src, srcPos, srcRem);

        position(pos + srcRem);
        src.position(srcPos + srcRem);

        return this;
    }

    /**
     * Absolute bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers {@code length} $type$s into this buffer from
     * the given source buffer, starting at the given {@code offset} in the
     * source buffer and the given {@code index} in this buffer. The positions
     * of both buffers are unchanged.
     *
     * <p> In other words, an invocation of this method of the form
     * <code>dst.put(index,&nbsp;src,&nbsp;offset,&nbsp;length)</code>
     * has exactly the same effect as the loop
     *
     * {@snippet lang=java :
     *     for (int i = offset, j = index; i < offset + length; i++, j++)
     *         dst.put(j, src.get(i));
     * }
     *
     * except that it first checks the consistency of the supplied parameters
     * and it is potentially much more efficient.  If this buffer and
     * the source buffer share the same backing array or memory, then the
     * result will be as if the source elements were first copied to an
     * intermediate location before being written into this buffer.
     *
     * @param index
     *        The index in this buffer at which the first $type$ will be
     *        written; must be non-negative and less than {@code limit()}
     *
     * @param src
     *        The buffer from which $type$s are to be read
     *
     * @param offset
     *        The index within the source buffer of the first $type$ to be
     *        read; must be non-negative and less than {@code src.limit()}
     *
     * @param length
     *        The number of $type$s to be read from the given buffer;
     *        must be non-negative and no larger than the smaller of
     *        {@code limit() - index} and {@code src.limit() - offset}
     *
     * @return This buffer
     *
     * @throws IndexOutOfBoundsException
     *         If the preconditions on the {@code index}, {@code offset}, and
     *         {@code length} parameters do not hold
     *
     * @throws ReadOnlyBufferException
     *         If this buffer is read-only
     *
     * @since 16
     */
    public $Type$Buffer put(int index, $Type$Buffer src, int offset, int length) {
        Objects.checkFromIndexSize(index, length, limit());
        Objects.checkFromIndexSize(offset, length, src.limit());
        if (isReadOnly())
            throw new ReadOnlyBufferException();

        putBuffer(index, src, offset, length);

        return this;
    }

    void putBuffer(int pos, $Type$Buffer src, int srcPos, int n) {
#if[rw]
        Object srcBase = src.base();
#if[char]
        if (src.isAddressable()) {
#else[char]
        assert srcBase != null || src.isDirect();
#end[char]

            Object base = base();
            assert base != null || isDirect();

            long srcAddr = src.address + ((long)srcPos << $LG_BYTES_PER_VALUE$);
            long addr = address + ((long)pos << $LG_BYTES_PER_VALUE$);
            long len = (long)n << $LG_BYTES_PER_VALUE$;

            try {
#if[!byte]
                if (this.order() != src.order())
                    SCOPED_MEMORY_ACCESS.copySwapMemory(
                            src.session(), session(), srcBase, srcAddr,
                            base, addr, len, $Fulltype$.BYTES);
                else
#end[!byte]
                    SCOPED_MEMORY_ACCESS.copyMemory(
                            src.session(), session(), srcBase, srcAddr,
                            base, addr, len);
            } finally {
                Reference.reachabilityFence(src);
                Reference.reachabilityFence(this);
            }
#if[char]
        } else { // src.isAddressable() == false
            assert StringCharBuffer.class.isInstance(src);
            int posMax = pos + n;
            for (int i = pos, j = srcPos; i < posMax; i++, j++)
                put(i, src.get(j));
        }
#end[char]
#else[rw]
        throw new ReadOnlyBufferException();
#end[rw]
    }

    /**
     * Relative bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers $type$s into this buffer from the given
     * source array.  If there are more $type$s to be copied from the array
     * than remain in this buffer, that is, if
     * {@code length}&nbsp;{@code >}&nbsp;{@code remaining()}, then no
     * $type$s are transferred and a {@link BufferOverflowException} is
     * thrown.
     *
     * <p> Otherwise, this method copies {@code length} $type$s from the
     * given array into this buffer, starting at the given offset in the array
     * and at the current position of this buffer.  The position of this buffer
     * is then incremented by {@code length}.
     *
     * <p> In other words, an invocation of this method of the form
     * <code>dst.put(src,&nbsp;off,&nbsp;len)</code> has exactly the same effect as
     * the loop
     *
     * {@snippet lang=java :
     *     for (int i = off; i < off + len; i++)
     *         dst.put(src[i]);
     * }
     *
     * except that it first checks that there is sufficient space in this
     * buffer and it is potentially much more efficient.
     *
     * @param  src
     *         The array from which $type$s are to be read
     *
     * @param  offset
     *         The offset within the array of the first $type$ to be read;
     *         must be non-negative and no larger than {@code src.length}
     *
     * @param  length
     *         The number of $type$s to be read from the given array;
     *         must be non-negative and no larger than
     *         {@code src.length - offset}
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code offset} and {@code length}
     *          parameters do not hold
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public $Type$Buffer put($type$[] src, int offset, int length) {
        if (isReadOnly())
            throw new ReadOnlyBufferException();
        Objects.checkFromIndexSize(offset, length, src.length);
        int pos = position();
        if (length > limit() - pos)
            throw new BufferOverflowException();

        putArray(pos, src, offset, length);

        position(pos + length);
        return this;
    }

    /**
     * Relative bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers the entire content of the given source
     * $type$ array into this buffer.  An invocation of this method of the
     * form {@code dst.put(a)} behaves in exactly the same way as the
     * invocation
     *
     * {@snippet lang=java :
     *     dst.put(a, 0, a.length)
     * }
     *
     * @param   src
     *          The source array
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public final $Type$Buffer put($type$[] src) {
        return put(src, 0, src.length);
    }

    /**
     * Absolute bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers {@code length} $type$s from the given
     * array, starting at the given offset in the array and at the given index
     * in this buffer.  The position of this buffer is unchanged.
     *
     * <p> An invocation of this method of the form
     * <code>dst.put(index,&nbsp;src,&nbsp;offset,&nbsp;length)</code>
     * has exactly the same effect as the following loop except that it first
     * checks the consistency of the supplied parameters and it is potentially
     * much more efficient:
     *
     * {@snippet lang=java :
     *     for (int i = offset, j = index; i < offset + length; i++, j++)
     *         dst.put(j, src[i]);
     * }
     *
     * @param  index
     *         The index in this buffer at which the first $type$ will be
     *         written; must be non-negative and less than {@code limit()}
     *
     * @param  src
     *         The array from which $type$s are to be read
     *
     * @param  offset
     *         The offset within the array of the first $type$ to be read;
     *         must be non-negative and less than {@code src.length}
     *
     * @param  length
     *         The number of $type$s to be read from the given array;
     *         must be non-negative and no larger than the smaller of
     *         {@code limit() - index} and {@code src.length - offset}
     *
     * @return  This buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code index}, {@code offset}, and
     *          {@code length} parameters do not hold
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     *
     * @since 13
     */
    public $Type$Buffer put(int index, $type$[] src, int offset, int length) {
        if (isReadOnly())
            throw new ReadOnlyBufferException();
        Objects.checkFromIndexSize(index, length, limit());
        Objects.checkFromIndexSize(offset, length, src.length);

        putArray(index, src, offset, length);

        return this;
    }

    /**
     * Absolute bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method copies $type$s into this buffer from the given source
     * array.  The position of this buffer is unchanged.  An invocation of this
     * method of the form <code>dst.put(index,&nbsp;src)</code>
     * behaves in exactly the same way as the invocation:
     *
     * {@snippet lang=java :
     *     dst.put(index, src, 0, src.length);
     * }
     *
     * @param  index
     *         The index in this buffer at which the first $type$ will be
     *         written; must be non-negative and less than {@code limit()}
     *
     * @param  src
     *         The array from which $type$s are to be read
     *
     * @return  This buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code index} is negative, not smaller than {@code limit()},
     *          or {@code limit() - index < src.length}
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     *
     * @since 13
     */
    public $Type$Buffer put(int index, $type$[] src) {
        return put(index, src, 0, src.length);
    }

    $Type$Buffer putArray(int index, $type$[] src, int offset, int length) {
#if[rw]
        if (
#if[char]
            isAddressable() &&
#end[char]
            ((long)length << $LG_BYTES_PER_VALUE$) > Bits.JNI_COPY_FROM_ARRAY_THRESHOLD) {
            long bufAddr = address + ((long)index << $LG_BYTES_PER_VALUE$);
            long srcOffset =
                ARRAY_BASE_OFFSET + ((long)offset << $LG_BYTES_PER_VALUE$);
            long len = (long)length << $LG_BYTES_PER_VALUE$;

            try {
#if[!byte]
                if (order() != ByteOrder.nativeOrder())
                    SCOPED_MEMORY_ACCESS.copySwapMemory(
                            null, session(), src, srcOffset,
                            base(), bufAddr, len, $Fulltype$.BYTES);
                else
#end[!byte]
                    SCOPED_MEMORY_ACCESS.copyMemory(
                            null, session(), src, srcOffset,
                            base(), bufAddr, len);
            } finally {
                Reference.reachabilityFence(this);
            }
        } else {
            int end = offset + length;
            for (int i = offset, j = index; i < end; i++, j++)
                this.put(j, src[i]);
        }
        return this;
#else[rw]
        throw new ReadOnlyBufferException();
#end[rw]
    }

#if[char]

    /**
     * Relative bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers $type$s from the given string into this
     * buffer.  If there are more $type$s to be copied from the string than
     * remain in this buffer, that is, if
     * <code>end&nbsp;-&nbsp;start</code>&nbsp;{@code >}&nbsp;{@code remaining()},
     * then no $type$s are transferred and a {@link
     * BufferOverflowException} is thrown.
     *
     * <p> Otherwise, this method copies
     * <i>n</i>&nbsp;=&nbsp;{@code end}&nbsp;-&nbsp;{@code start} $type$s
     * from the given string into this buffer, starting at the given
     * {@code start} index and at the current position of this buffer.  The
     * position of this buffer is then incremented by <i>n</i>.
     *
     * <p> In other words, an invocation of this method of the form
     * <code>dst.put(src,&nbsp;start,&nbsp;end)</code> has exactly the same effect
     * as the loop
     *
     * {@snippet lang=java :
     *     for (int i = start; i < end; i++)
     *         dst.put(src.charAt(i));
     * }
     *
     * except that it first checks that there is sufficient space in this
     * buffer and it is potentially much more efficient.
     *
     * @param  src
     *         The string from which $type$s are to be read
     *
     * @param  start
     *         The offset within the string of the first $type$ to be read;
     *         must be non-negative and no larger than
     *         {@code string.length()}
     *
     * @param  end
     *         The offset within the string of the last $type$ to be read,
     *         plus one; must be non-negative and no larger than
     *         {@code string.length()}
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on the {@code start} and {@code end}
     *          parameters do not hold
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public $Type$Buffer put(String src, int start, int end) {
        Objects.checkFromIndexSize(start, end - start, src.length());
        if (isReadOnly())
            throw new ReadOnlyBufferException();
        if (end - start > remaining())
            throw new BufferOverflowException();
        for (int i = start; i < end; i++)
            this.put(src.charAt(i));
        return this;
    }

    /**
     * Relative bulk <i>put</i> method&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> This method transfers the entire content of the given source string
     * into this buffer.  An invocation of this method of the form
     * {@code dst.put(s)} behaves in exactly the same way as the invocation
     *
     * {@snippet lang=java :
     *     dst.put(s, 0, s.length())
     * }
     *
     * @param   src
     *          The source string
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public final $Type$Buffer put(String src) {
        return put(src, 0, src.length());
    }

#end[char]


    // -- Other stuff --

    /**
     * Tells whether or not this buffer is backed by an accessible $type$
     * array.
     *
     * <p> If this method returns {@code true} then the {@link #array() array}
     * and {@link #arrayOffset() arrayOffset} methods may safely be invoked.
     * </p>
     *
     * @return  {@code true} if, and only if, this buffer
     *          is backed by an array and is not read-only
     */
    public final boolean hasArray() {
        return (hb != null) && !isReadOnly;
    }

    /**
     * Returns the $type$ array that backs this
     * buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> Modifications to this buffer's content will cause the returned
     * array's content to be modified, and vice versa.
     *
     * <p> Invoke the {@link #hasArray hasArray} method before invoking this
     * method in order to ensure that this buffer has an accessible backing
     * array.  </p>
     *
     * @return  The array that backs this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is backed by an array but is read-only
     *
     * @throws  UnsupportedOperationException
     *          If this buffer is not backed by an accessible array
     */
    public final $type$[] array() {
        if (hb == null)
            throw new UnsupportedOperationException();
        if (isReadOnly)
            throw new ReadOnlyBufferException();
        return hb;
    }

    /**
     * Returns the offset within this buffer's backing array of the first
     * element of the buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> If this buffer is backed by an array then buffer position <i>p</i>
     * corresponds to array index <i>p</i>&nbsp;+&nbsp;{@code arrayOffset()}.
     *
     * <p> Invoke the {@link #hasArray hasArray} method before invoking this
     * method in order to ensure that this buffer has an accessible backing
     * array.  </p>
     *
     * @return  The offset within this buffer's array
     *          of the first element of the buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is backed by an array but is read-only
     *
     * @throws  UnsupportedOperationException
     *          If this buffer is not backed by an accessible array
     */
    public final int arrayOffset() {
        if (hb == null)
            throw new UnsupportedOperationException();
        if (isReadOnly)
            throw new ReadOnlyBufferException();
        return offset;
    }

    // -- Covariant return type overrides

    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public
#if[!byte]
    final
#end[!byte]
    $Type$Buffer position(int newPosition) {
        super.position(newPosition);
        return this;
    }
    
    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public
#if[!byte]
    final
#end[!byte]
    $Type$Buffer limit(int newLimit) {
        super.limit(newLimit);
        return this;
    }
    
    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public 
#if[!byte]
    final
#end[!byte]
    $Type$Buffer mark() {
        super.mark();
        return this;
    }

    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public 
#if[!byte]
    final
#end[!byte]
    $Type$Buffer reset() {
        super.reset();
        return this;
    }

    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public 
#if[!byte]
    final
#end[!byte]
    $Type$Buffer clear() {
        super.clear();
        return this;
    }

    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public 
#if[!byte]
    final
#end[!byte]
    $Type$Buffer flip() {
        super.flip();
        return this;
    }

    /**
     * {@inheritDoc}
     * @since 9
     */
    @Override
    public 
#if[!byte]
    final
#end[!byte]
    $Type$Buffer rewind() {
        super.rewind();
        return this;
    }

    /**
     * Compacts this buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> The $type$s between the buffer's current position and its limit,
     * if any, are copied to the beginning of the buffer.  That is, the
     * $type$ at index <i>p</i>&nbsp;=&nbsp;{@code position()} is copied
     * to index zero, the $type$ at index <i>p</i>&nbsp;+&nbsp;1 is copied
     * to index one, and so forth until the $type$ at index
     * {@code limit()}&nbsp;-&nbsp;1 is copied to index
     * <i>n</i>&nbsp;=&nbsp;{@code limit()}&nbsp;-&nbsp;{@code 1}&nbsp;-&nbsp;<i>p</i>.
     * The buffer's position is then set to <i>n+1</i> and its limit is set to
     * its capacity.  The mark, if defined, is discarded.
     *
     * <p> The buffer's position is set to the number of $type$s copied,
     * rather than to zero, so that an invocation of this method can be
     * followed immediately by an invocation of another relative <i>put</i>
     * method. </p>
     *
#if[byte]
     *
     * <p> Invoke this method after writing data from a buffer in case the
     * write was incomplete.  The following loop, for example, copies bytes
     * from one channel to another via the buffer {@code buf}:
     *
     * {@snippet lang=java :
     *     buf.clear();          // Prepare buffer for use
     *     while (in.read(buf) >= 0 || buf.position != 0) {
     *         buf.flip();
     *         out.write(buf);
     *         buf.compact();    // In case of partial write
     *     }
     * }
     *
#end[byte]
     *
     * @return  This buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     */
    public abstract $Type$Buffer compact();

    /**
     * Tells whether or not this $type$ buffer is direct.
     *
     * @return  {@code true} if, and only if, this buffer is direct
     */
    public abstract boolean isDirect();

#if[char]
    /**
     * Tells whether this buffer has addressable memory, e.g., a Java array or
     * a native address.  This method returns {@code true}.  Subclasses such as
     * {@code StringCharBuffer}, which wraps a {@code CharSequence}, should
     * override this method to return {@code false}.
     *
     * @return {@code true} if, and only, this buffer has addressable memory
     */
    boolean isAddressable() {
        return true;
    }
#end[char]

#if[!char]

    /**
     * Returns a string summarizing the state of this buffer.
     *
     * @return  A summary string
     */
    public String toString() {
        return getClass().getName()
                 + "[pos=" + position()
                 + " lim=" + limit()
                 + " cap=" + capacity()
                 + "]";
    }

#end[!char]


    // ## Should really use unchecked accessors here for speed

    /**
     * Returns the current hash code of this buffer.
     *
     * <p> The hash code of a $type$ buffer depends only upon its remaining
     * elements; that is, upon the elements from {@code position()} up to, and
     * including, the element at {@code limit()}&nbsp;-&nbsp;{@code 1}.
     *
     * <p> Because buffer hash codes are content-dependent, it is inadvisable
     * to use buffers as keys in hash maps or similar data structures unless it
     * is known that their contents will not change.  </p>
     *
     * @return  The current hash code of this buffer
     */
    public int hashCode() {
        int h = 1;
        int p = position();
        for (int i = limit() - 1; i >= p; i--)
#if[int]
            h = 31 * h + get(i);
#else[int]
            h = 31 * h + (int)get(i);
#end[int]
        return h;
    }

    /**
     * Tells whether or not this buffer is equal to another object.
     *
     * <p> Two $type$ buffers are equal if, and only if,
     *
     * <ol>
     *
     *   <li><p> They have the same element type,  </p></li>
     *
     *   <li><p> They have the same number of remaining elements, and
     *   </p></li>
     *
     *   <li><p> The two sequences of remaining elements, considered
     *   independently of their starting positions, are pointwise equal.
#if[floatingPointType]
     *   This method considers two $type$ elements {@code a} and {@code b}
     *   to be equal if
     *   {@code (a == b) || ($Fulltype$.isNaN(a) && $Fulltype$.isNaN(b))}.
     *   The values {@code -0.0} and {@code +0.0} are considered to be
     *   equal, unlike {@link $Fulltype$#equals(Object)}.
#end[floatingPointType]
     *   </p></li>
     *
     * </ol>
     *
     * <p> A $type$ buffer is not equal to any other type of object.  </p>
     *
     * @param  ob  The object to which this buffer is to be compared
     *
     * @return  {@code true} if, and only if, this buffer is equal to the
     *           given object
     */
    public boolean equals(Object ob) {
        if (this == ob)
            return true;
        if (!(ob instanceof $Type$Buffer))
            return false;
        $Type$Buffer that = ($Type$Buffer)ob;
        int thisPos = this.position();
        int thisRem = this.limit() - thisPos;
        int thatPos = that.position();
        int thatRem = that.limit() - thatPos;
        if (thisRem < 0 || thisRem != thatRem)
            return false;
        return BufferMismatch.mismatch(this, thisPos,
                                       that, thatPos,
                                       thisRem) < 0;
    }

    /**
     * Compares this buffer to another.
     *
     * <p> Two $type$ buffers are compared by comparing their sequences of
     * remaining elements lexicographically, without regard to the starting
     * position of each sequence within its corresponding buffer.
#if[floatingPointType]
     * Pairs of {@code $type$} elements are compared as if by invoking
     * {@link $Fulltype$#compare($type$,$type$)}, except that
     * {@code -0.0} and {@code 0.0} are considered to be equal.
     * {@code $Fulltype$.NaN} is considered by this method to be equal
     * to itself and greater than all other {@code $type$} values
     * (including {@code $Fulltype$.POSITIVE_INFINITY}).
#else[floatingPointType]
     * Pairs of {@code $type$} elements are compared as if by invoking
     * {@link $Fulltype$#compare($type$,$type$)}.
#end[floatingPointType]
     *
     * <p> A $type$ buffer is not comparable to any other type of object.
     *
     * @return  A negative integer, zero, or a positive integer as this buffer
     *          is less than, equal to, or greater than the given buffer
     */
    public int compareTo($Type$Buffer that) {
        int thisPos = this.position();
        int thisRem = this.limit() - thisPos;
        int thatPos = that.position();
        int thatRem = that.limit() - thatPos;
        int length = Math.min(thisRem, thatRem);
        if (length < 0)
            return -1;
        int i = BufferMismatch.mismatch(this, thisPos,
                                        that, thatPos,
                                        length);
        if (i >= 0) {
            return compare(this.get(thisPos + i), that.get(thatPos + i));
        }
        return thisRem - thatRem;
    }

    private static int compare($type$ x, $type$ y) {
#if[floatingPointType]
        return ((x < y)  ? -1 :
                (x > y)  ? +1 :
                (x == y) ?  0 :
                $Fulltype$.isNaN(x) ? ($Fulltype$.isNaN(y) ? 0 : +1) : -1);
#else[floatingPointType]
        return $Fulltype$.compare(x, y);
#end[floatingPointType]
    }

    /**
     * Finds and returns the relative index of the first mismatch between this
     * buffer and a given buffer.  The index is relative to the
     * {@link #position() position} of each buffer and will be in the range of
     * 0 (inclusive) up to the smaller of the {@link #remaining() remaining}
     * elements in each buffer (exclusive).
     *
     * <p> If the two buffers share a common prefix then the returned index is
     * the length of the common prefix and it follows that there is a mismatch
     * between the two buffers at that index within the respective buffers.
     * If one buffer is a proper prefix of the other then the returned index is
     * the smaller of the remaining elements in each buffer, and it follows that
     * the index is only valid for the buffer with the larger number of
     * remaining elements.
     * Otherwise, there is no mismatch.
     *
     * @param  that
     *         The byte buffer to be tested for a mismatch with this buffer
     *
     * @return  The relative index of the first mismatch between this and the
     *          given buffer, otherwise -1 if no mismatch.
     *
     * @since 11
     */
    public int mismatch($Type$Buffer that) {
        int thisPos = this.position();
        int thisRem = this.limit() - thisPos;
        int thatPos = that.position();
        int thatRem = that.limit() - thatPos;
        int length = Math.min(thisRem, thatRem);
        if (length < 0)
            return -1;
        int r = BufferMismatch.mismatch(this, thisPos,
                                        that, thatPos,
                                        length);
        return (r == -1 && thisRem != thatRem) ? length : r;
    }

    // -- Other char stuff --

#if[char]

    /**
     * Returns a string containing the characters in this buffer.
     *
     * <p> The first character of the resulting string will be the character at
     * this buffer's position, while the last character will be the character
     * at index {@code limit()}&nbsp;-&nbsp;1.  Invoking this method does not
     * change the buffer's position. </p>
     *
     * @return  The specified string
     */
    public String toString() {
        return toString(position(), limit());
    }

    abstract String toString(int start, int end);       // package-private


    // --- Methods to support CharSequence ---

    /**
     * Returns the length of this character buffer.
     *
     * <p> When viewed as a character sequence, the length of a character
     * buffer is simply the number of characters between the position
     * (inclusive) and the limit (exclusive); that is, it is equivalent to
     * {@code remaining()}. </p>
     *
     * @return  The length of this character buffer
     */
    public final int length() {
        return remaining();
    }

    /**
     * Returns {@code true} if this character buffer is empty.
     *
     * @return {@code true} if there are {@code 0} remaining characters,
     *         otherwise {@code false}
     *
     * @since 15
     */
    public final boolean isEmpty() {
        return remaining() == 0;
    }

    /**
     * Reads the character at the given index relative to the current
     * position.
     *
     * @param  index
     *         The index of the character to be read, relative to the position;
     *         must be non-negative and smaller than {@code remaining()}
     *
     * @return  The character at index
     *          <code>position()&nbsp;+&nbsp;index</code>
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on {@code index} do not hold
     */
    public final char charAt(int index) {
        return get(position() + checkIndex(index, 1));
    }

    /**
     * Creates a new character buffer that represents the specified subsequence
     * of this buffer, relative to the current position.
     *
     * <p> The new buffer will share this buffer's content; that is, if the
     * content of this buffer is mutable then modifications to one buffer will
     * cause the other to be modified.  The new buffer's capacity will be that
     * of this buffer, its position will be
     * {@code position()}&nbsp;+&nbsp;{@code start}, its limit will be
     * {@code position()}&nbsp;+&nbsp;{@code end}, and its byte order
     * will be identical to that of this buffer. The new buffer will be direct
     * if, and only if, this buffer is direct, and it will be read-only
     * if, and only if, this buffer is read-only.  </p>
     *
     * @param  start
     *         The index, relative to the current position, of the first
     *         character in the subsequence; must be non-negative and no larger
     *         than {@code remaining()}
     *
     * @param  end
     *         The index, relative to the current position, of the character
     *         following the last character in the subsequence; must be no
     *         smaller than {@code start} and no larger than
     *         {@code remaining()}
     *
     * @return  The new character buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If the preconditions on {@code start} and {@code end}
     *          do not hold
     */
    public abstract CharBuffer subSequence(int start, int end);


    // --- Methods to support Appendable ---

    /**
     * Appends the specified character sequence  to this
     * buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> An invocation of this method of the form {@code dst.append(csq)}
     * behaves in exactly the same way as the invocation
     *
     * {@snippet lang=java :
     *     dst.put(csq.toString())
     * }
     *
     * <p> Depending on the specification of {@code toString} for the
     * character sequence {@code csq}, the entire sequence may not be
     * appended.  For instance, invoking the {@link $Type$Buffer#toString()
     * toString} method of a character buffer will return a subsequence whose
     * content depends upon the buffer's position and limit.
     *
     * @param  csq
     *         The character sequence to append.  If {@code csq} is
     *         {@code null}, then the four characters {@code "null"} are
     *         appended to this character buffer.
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     *
     * @since  1.5
     */
    public $Type$Buffer append(CharSequence csq) {
        if (csq == null)
            return put("null");
        else if (csq instanceof CharBuffer cb)
            return put(cb);
        else
            return put(csq.toString());
    }

    /**
     * Appends a subsequence of the  specified character sequence  to this
     * buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> An invocation of this method of the form {@code dst.append(csq, start,
     * end)} when {@code csq} is not {@code null}, behaves in exactly the
     * same way as the invocation
     *
     * {@snippet lang=java :
     *     dst.put(csq.subSequence(start, end).toString())
     * }
     *
     * @param  csq
     *         The character sequence from which a subsequence will be
     *         appended.  If {@code csq} is {@code null}, then characters
     *         will be appended as if {@code csq} contained the four
     *         characters {@code "null"}.
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  IndexOutOfBoundsException
     *          If {@code start} or {@code end} are negative, {@code start}
     *          is greater than {@code end}, or {@code end} is greater than
     *          {@code csq.length()}
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     *
     * @since  1.5
     */
    public $Type$Buffer append(CharSequence csq, int start, int end) {
        if (csq instanceof CharBuffer cb) {
            Objects.checkFromToIndex(start, end, csq.length());

            //
            // the append method throws BufferOverflowException when
            // there is insufficient space in the buffer
            //
            int length = end - start;
            int pos = position();
            int lim = limit();
            int rem = (pos <= lim) ? lim - pos : 0;
            if (length > rem)
                throw new BufferOverflowException();

            put(pos, cb, start, length);
            position(pos + length);
            return this;
        }
        CharSequence cs = (csq == null ? "null" : csq);
        return put(cs.subSequence(start, end).toString());
    }

    /**
     * Appends the specified $type$  to this
     * buffer&nbsp;&nbsp;<i>(optional operation)</i>.
     *
     * <p> An invocation of this method of the form {@code dst.append($x$)}
     * behaves in exactly the same way as the invocation
     *
     * {@snippet lang=java :
     *     dst.put($x$)
     * }
     *
     * @param  $x$
     *         The 16-bit $type$ to append
     *
     * @return  This buffer
     *
     * @throws  BufferOverflowException
     *          If there is insufficient space in this buffer
     *
     * @throws  ReadOnlyBufferException
     *          If this buffer is read-only
     *
     * @since  1.5
     */
    public $Type$Buffer append($type$ $x$) {
        return put($x$);
    }

#end[char]


    // -- Other byte stuff: Access to binary data --

#if[!byte]

    /**
     * Retrieves this buffer's byte order.
     *
     * <p> The byte order of $a$ $type$ buffer created by allocation or by
     * wrapping an existing {@code $type$} array is the {@link
     * ByteOrder#nativeOrder native order} of the underlying
     * hardware.  The byte order of $a$ $type$ buffer created as a <a
     * href="ByteBuffer.html#views">view</a> of a byte buffer is that of the
     * byte buffer at the moment that the view is created.  </p>
     *
     * @return  This buffer's byte order
     */
    public abstract ByteOrder order();

#end[!byte]

#if[char]
    // The order or null if the buffer does not cover a memory region,
    // such as StringCharBuffer
    abstract ByteOrder charRegionOrder();
#end[char]

#if[byte]

    boolean bigEndian                                   // package-private
        = true;
    boolean nativeByteOrder                             // package-private
        = (ByteOrder.nativeOrder() == ByteOrder.BIG_ENDIAN);

    /**
     * Retrieves this buffer's byte order.
     *
     * <p> The byte order is used when reading or writing multibyte values, and
     * when creating buffers that are views of this byte buffer.  The order of
     * a newly-created byte buffer is always {@link ByteOrder#BIG_ENDIAN
     * BIG_ENDIAN}.  </p>
     *
     * @return  This buffer's byte order
     */
    public final ByteOrder order() {
        return bigEndian ? ByteOrder.BIG_ENDIAN : ByteOrder.LITTLE_ENDIAN;
    }

    /**
     * Modifies this buffer's byte order.
     *
     * @param  bo
     *         The new byte order,
     *         either {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}
     *         or {@link ByteOrder#LITTLE_ENDIAN LITTLE_ENDIAN}
     *
     * @return  This buffer
     */
    public final $Type$Buffer order(ByteOrder bo) {
        bigEndian = (bo == ByteOrder.BIG_ENDIAN);
        nativeByteOrder =
            (bigEndian == (ByteOrder.nativeOrder() == ByteOrder.BIG_ENDIAN));
        return this;
    }

    /**
     * Returns the memory address, pointing to the byte at the given index,
     * modulo the given unit size.
     *
     * <p> The return value is non-negative in the range of {@code 0}
     * (inclusive) up to {@code unitSize} (exclusive), with zero indicating
     * that the address of the byte at the index is aligned for the unit size,
     * and a positive value that the address is misaligned for the unit size.
     * If the address of the byte at the index is misaligned, the return value
     * represents how much the index should be adjusted to locate a byte at an
     * aligned address.  Specifically, the index should either be decremented by
     * the return value if the latter is not greater than {@code index}, or be
     * incremented by the unit size minus the return value.  Therefore given
     * {@snippet lang=java :
     *     int value = alignmentOffset(index, unitSize)
     * }
     * then the identities
     * {@snippet lang=java :
     *     alignmentOffset(index - value, unitSize) == 0, value <= index
     * }
     * and
     * {@snippet lang=java :
     *     alignmentOffset(index + (unitSize - value), unitSize) == 0
     * }
     * must hold.
     * 
     * @apiNote
     * This method may be utilized to determine if unit size bytes from an
     * index can be accessed atomically, if supported by the native platform.
     *
     * @implNote
     * This implementation throws {@code UnsupportedOperationException} for
     * non-direct buffers when the given unit size is greater then {@code 8}.
     *
     * @param  index
     *         The index to query for alignment offset, must be non-negative, no
     *         upper bounds check is performed
     *
     * @param  unitSize
     *         The unit size in bytes, must be a power of {@code 2}
     *
     * @return  The indexed byte's memory address modulo the unit size
     *
     * @throws IllegalArgumentException
     *         If the index is negative or the unit size is not a power of
     *         {@code 2}
     *
     * @throws UnsupportedOperationException
     *         If the native platform does not guarantee stable alignment offset
     *         values for the given unit size when managing the memory regions
     *         of buffers of the same kind as this buffer (direct or
     *         non-direct).  For example, if garbage collection would result
     *         in the moving of a memory region covered by a non-direct buffer
     *         from one location to another and both locations have different
     *         alignment characteristics.
     *
     * @see #alignedSlice(int)
     * @since 9
     */
    public final int alignmentOffset(int index, int unitSize) {
        if (index < 0)
            throw new IllegalArgumentException("Index less than zero: " + index);
        if (unitSize < 1 || (unitSize & (unitSize - 1)) != 0)
            throw new IllegalArgumentException("Unit size not a power of two: " + unitSize);
        if (unitSize > 8 && !isDirect())
            throw new UnsupportedOperationException("Unit size unsupported for non-direct buffers: " + unitSize);

        return (int) ((address + index) & (unitSize - 1));
    }

    /**
     * Creates a new byte buffer whose content is a shared and aligned
     * subsequence of this buffer's content.
     *
     * <p> The content of the new buffer will start at this buffer's current
     * position rounded up to the index of the nearest aligned byte for the
     * given unit size, and end at this buffer's limit rounded down to the index
     * of the nearest aligned byte for the given unit size.
     * If rounding results in out-of-bound values then the new buffer's capacity
     * and limit will be zero.  If rounding is within bounds the following
     * expressions will be true for a new buffer {@code nb} and unit size
     * {@code unitSize}:
     * {@snippet lang=java :
     *     nb.alignmentOffset(0, unitSize) == 0
     *     nb.alignmentOffset(nb.limit(), unitSize) == 0
     * }
     *
     * <p> Changes to this buffer's content will be visible in the new
     * buffer, and vice versa; the two buffers' position, limit, and mark
     * values will be independent.
     *
     * <p> The new buffer's position will be zero, its capacity and its limit
     * will be the number of bytes remaining in this buffer or fewer subject to
     * alignment, its mark will be undefined, and its byte order will be
     * {@link ByteOrder#BIG_ENDIAN BIG_ENDIAN}.
     *
     * The new buffer will be direct if, and only if, this buffer is direct, and
     * it will be read-only if, and only if, this buffer is read-only.  </p>
     *
     * @apiNote
     * This method may be utilized to create a new buffer where unit size bytes
     * from index, that is a multiple of the unit size, may be accessed
     * atomically, if supported by the native platform.
     *
     * @implNote
     * This implementation throws {@code UnsupportedOperationException} for
     * non-direct buffers when the given unit size is greater then {@code 8}.
     *
     * @param  unitSize
     *         The unit size in bytes, must be a power of {@code 2}
     *
     * @return  The new byte buffer
     *
     * @throws IllegalArgumentException
     *         If the unit size not a power of {@code 2}
     *
     * @throws UnsupportedOperationException
     *         If the native platform does not guarantee stable aligned slices
     *         for the given unit size when managing the memory regions
     *         of buffers of the same kind as this buffer (direct or
     *         non-direct).  For example, if garbage collection would result
     *         in the moving of a memory region covered by a non-direct buffer
     *         from one location to another and both locations have different
     *         alignment characteristics.
     *
     * @see #alignmentOffset(int, int)
     * @see #slice()
     * @since 9
     */
    public final ByteBuffer alignedSlice(int unitSize) {
        int pos = position();
        int lim = limit();

        int pos_mod = alignmentOffset(pos, unitSize);
        int lim_mod = alignmentOffset(lim, unitSize);

        // Round up the position to align with unit size
        int aligned_pos = (pos_mod > 0)
            ? pos + (unitSize - pos_mod)
            : pos;

        // Round down the limit to align with unit size
        int aligned_lim = lim - lim_mod;

        if (aligned_pos > lim || aligned_lim < pos) {
            aligned_pos = aligned_lim = pos;
        }

        return slice(aligned_pos, aligned_lim - aligned_pos);
    }

    // #BIN
    //
    // Binary-data access methods  for short, char, int, long, float,
    // and double will be inserted here

#end[byte]

#if[streamableType]

#if[char]
    @Override
#end[char]
    public $Streamtype$Stream $type$s() {
        return StreamSupport.$streamtype$Stream(() -> new $Type$BufferSpliterator(this),
            Buffer.SPLITERATOR_CHARACTERISTICS, false);
    }

#end[streamableType]

}