/
githubmirror
/
jdk11u
Обзор
Документация
Войти
/
githubmirror
/
jdk11u
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
master
make/autoconf/lib-tests.m4
268 строк
9 KB
Matthias Baesken
8317039: Enable specifying the JDK used to run jtreg
17 июл 2024, 16:03
17 июл 2024, 16:03
f27e8c8
Код
Авторство
О чём код?
# # Copyright (c) 2018, 2022, Oracle and/or its affiliates. All rights reserved. # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # # This code is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License version 2 only, as # published by the Free Software Foundation. Oracle designates this # particular file as subject to the "Classpath" exception as provided # by Oracle in the LICENSE file that accompanied this code. # # This code is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # version 2 for more details (a copy is included in the LICENSE file that # accompanied this code). # # You should have received a copy of the GNU General Public License version # 2 along with this work; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. # # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA # or visit www.oracle.com if you need additional information or have any # questions. # ################################################################################ # Setup libraries and functionalities needed to test the JDK. ################################################################################ # Minimum supported version JTREG_MINIMUM_VERSION=7.3.1 ############################################################################### # # Check for graalunit libs, needed for running graalunit tests. # AC_DEFUN_ONCE([LIB_TESTS_SETUP_GRAALUNIT], [ AC_ARG_WITH(graalunit-lib, [AS_HELP_STRING([--with-graalunit-lib], [specify location of 3rd party libraries used by Graal unit tests])]) GRAALUNIT_LIB= if test "x${with_graalunit_lib}" != x; then AC_MSG_CHECKING([for graalunit libs]) if test "x${with_graalunit_lib}" = xno; then AC_MSG_RESULT([disabled, graalunit tests can not be run]) elif test "x${with_graalunit_lib}" = xyes; then AC_MSG_RESULT([not specified]) AC_MSG_ERROR([You must specify the path to 3rd party libraries used by Graal unit tests]) else GRAALUNIT_LIB="${with_graalunit_lib}" if test ! -d "${GRAALUNIT_LIB}"; then AC_MSG_RESULT([no]) AC_MSG_ERROR([Could not find graalunit 3rd party libraries as specified. (${with_graalunit_lib})]) else AC_MSG_RESULT([$GRAALUNIT_LIB]) fi fi fi UTIL_FIXUP_PATH([GRAALUNIT_LIB]) AC_SUBST(GRAALUNIT_LIB) ]) # Setup the JTReg Regression Test Harness. AC_DEFUN_ONCE([LIB_TESTS_SETUP_JTREG], [ AC_ARG_WITH(jtreg, [AS_HELP_STRING([--with-jtreg], [Regression Test Harness @<:@probed@:>@])]) if test "x$with_jtreg" = xno; then # jtreg disabled AC_MSG_CHECKING([for jtreg test harness]) AC_MSG_RESULT([no, disabled]) elif test "x$with_jtreg" != xyes && test "x$with_jtreg" != x; then # An explicit path is specified, use it. JT_HOME="$with_jtreg" UTIL_FIXUP_PATH([JT_HOME]) if test ! -d "$JT_HOME"; then AC_MSG_ERROR([jtreg home directory from --with-jtreg=$with_jtreg does not exist]) fi if test ! -e "$JT_HOME/lib/jtreg.jar"; then AC_MSG_ERROR([jtreg home directory from --with-jtreg=$with_jtreg is not a valid jtreg home]) fi JTREGEXE="$JT_HOME/bin/jtreg" if test ! -x "$JTREGEXE"; then AC_MSG_ERROR([jtreg home directory from --with-jtreg=$with_jtreg does not contain valid jtreg executable]) fi AC_MSG_CHECKING([for jtreg test harness]) AC_MSG_RESULT([$JT_HOME]) else # Try to locate jtreg if test "x$JT_HOME" != x; then # JT_HOME set in environment, use it if test ! -d "$JT_HOME"; then AC_MSG_WARN([Ignoring JT_HOME pointing to invalid directory: $JT_HOME]) JT_HOME= else if test ! -e "$JT_HOME/lib/jtreg.jar"; then AC_MSG_WARN([Ignoring JT_HOME which is not a valid jtreg home: $JT_HOME]) JT_HOME= elif test ! -x "$JT_HOME/bin/jtreg"; then AC_MSG_WARN([Ignoring JT_HOME which does not contain valid jtreg executable: $JT_HOME]) JT_HOME= else JTREGEXE="$JT_HOME/bin/jtreg" AC_MSG_NOTICE([Located jtreg using JT_HOME from environment]) fi fi fi if test "x$JT_HOME" = x; then # JT_HOME is not set in environment, or was deemed invalid. # Try to find jtreg on path UTIL_LOOKUP_PROGS(JTREGEXE, jtreg) if test "x$JTREGEXE" != x; then # That's good, now try to derive JT_HOME JT_HOME=`(cd $($DIRNAME $JTREGEXE)/.. && pwd)` if test ! -e "$JT_HOME/lib/jtreg.jar"; then AC_MSG_WARN([Ignoring jtreg from path since a valid jtreg home cannot be found]) JT_HOME= JTREGEXE= else AC_MSG_NOTICE([Located jtreg using jtreg executable in path]) fi fi fi AC_MSG_CHECKING([for jtreg test harness]) if test "x$JT_HOME" != x; then AC_MSG_RESULT([$JT_HOME]) else AC_MSG_RESULT([no, not found]) if test "x$with_jtreg" = xyes; then AC_MSG_ERROR([--with-jtreg was specified, but no jtreg found.]) fi fi fi UTIL_FIXUP_EXECUTABLE(JTREGEXE) UTIL_FIXUP_PATH(JT_HOME) AC_SUBST(JT_HOME) # Specify a JDK for running jtreg. Defaults to the BOOT_JDK. AC_ARG_WITH(jtreg-jdk, [AS_HELP_STRING([--with-jdk], [path to JDK for running jtreg @<:@BOOT_JDK@:>@])]) AC_MSG_CHECKING([for jtreg jdk]) if test "x${with_jtreg_jdk}" != x; then if test "x${with_jtreg_jdk}" = xno; then AC_MSG_RESULT([no, jtreg jdk not specified]) elif test "x${with_jtreg_jdk}" = xyes; then AC_MSG_RESULT([not specified]) AC_MSG_ERROR([--with-jtreg-jdk needs a value]) else JTREG_JDK="${with_jtreg_jdk}" AC_MSG_RESULT([$JTREG_JDK]) UTIL_FIXUP_PATH(JTREG_JDK) if test ! -f "$JTREG_JDK/bin/java"; then AC_MSG_ERROR([Could not find jtreg java at $JTREG_JDK/bin/java]) fi fi else JTREG_JDK="${BOOT_JDK}" AC_MSG_RESULT([no, using BOOT_JDK]) fi UTIL_FIXUP_PATH(JTREG_JDK) AC_SUBST([JTREG_JDK]) # For use in the configure script JTREG_JAVA="$FIXPATH $JTREG_JDK/bin/java" # Verify jtreg version if test "x$JT_HOME" != x; then AC_MSG_CHECKING([jtreg jar existence]) if test ! -f "$JT_HOME/lib/jtreg.jar"; then AC_MSG_ERROR([Could not find jtreg jar at $JT_HOME/lib/jtreg.jar]) fi AC_MSG_CHECKING([jtreg version number]) # jtreg -version looks like this: "jtreg 6.1+1-19" # Extract actual version part ("6.1" in this case) jtreg_version_full=$($JTREG_JAVA -jar $JT_HOME/lib/jtreg.jar -version | $HEAD -n 1 | $CUT -d ' ' -f 2) jtreg_version=${jtreg_version_full/%+*} AC_MSG_RESULT([$jtreg_version]) # This is a simplified version of TOOLCHAIN_CHECK_COMPILER_VERSION comparable_actual_version=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", [$]1, [$]2, [$]3, [$]4) }' <<< "$jtreg_version"` comparable_minimum_version=`$AWK -F. '{ printf("%05d%05d%05d%05d\n", [$]1, [$]2, [$]3, [$]4) }' <<< "$JTREG_MINIMUM_VERSION"` if test $comparable_actual_version -lt $comparable_minimum_version ; then AC_MSG_ERROR([jtreg version is too old, at least version $JTREG_MINIMUM_VERSION is required]) fi fi AC_SUBST(JTREGEXE) ]) # Setup the JIB dependency resolver AC_DEFUN_ONCE([LIB_TESTS_SETUP_JIB], [ AC_ARG_WITH(jib, [AS_HELP_STRING([--with-jib], [Jib dependency management tool @<:@not used@:>@])]) if test "x$with_jib" = xno || test "x$with_jib" = x; then # jib disabled AC_MSG_CHECKING([for jib]) AC_MSG_RESULT(no) elif test "x$with_jib" = xyes; then AC_MSG_ERROR([Must supply a value to --with-jib]) else JIB_HOME="${with_jib}" AC_MSG_CHECKING([for jib]) AC_MSG_RESULT(${JIB_HOME}) if test ! -d "${JIB_HOME}"; then AC_MSG_ERROR([--with-jib must be a directory]) fi JIB_JAR=$(ls ${JIB_HOME}/lib/jib-*.jar) if test ! -f "${JIB_JAR}"; then AC_MSG_ERROR([Could not find jib jar file in ${JIB_HOME}]) fi fi AC_SUBST(JIB_HOME) ]) ################################################################################ # # Check if building of the jtreg failure handler should be enabled. # AC_DEFUN_ONCE([LIB_TESTS_ENABLE_DISABLE_FAILURE_HANDLER], [ AC_ARG_ENABLE([jtreg-failure-handler], [AS_HELP_STRING([--enable-jtreg-failure-handler], [forces build of the jtreg failure handler to be enabled, missing dependencies become fatal errors. Default is auto, where the failure handler is built if all dependencies are present and otherwise just disabled.])]) AC_MSG_CHECKING([if jtreg failure handler should be built]) if test "x$enable_jtreg_failure_handler" = "xyes"; then if test "x$JT_HOME" = "x"; then AC_MSG_ERROR([Cannot enable jtreg failure handler without jtreg.]) else BUILD_FAILURE_HANDLER=true AC_MSG_RESULT([yes, forced]) fi elif test "x$enable_jtreg_failure_handler" = "xno"; then BUILD_FAILURE_HANDLER=false AC_MSG_RESULT([no, forced]) elif test "x$enable_jtreg_failure_handler" = "xauto" \ || test "x$enable_jtreg_failure_handler" = "x"; then if test "x$JT_HOME" = "x"; then BUILD_FAILURE_HANDLER=false AC_MSG_RESULT([no, missing jtreg]) else BUILD_FAILURE_HANDLER=true AC_MSG_RESULT([yes, jtreg present]) fi else AC_MSG_ERROR([Invalid value for --enable-jtreg-failure-handler: $enable_jtreg_failure_handler]) fi AC_SUBST(BUILD_FAILURE_HANDLER) ])