githubmirror/iputils

doc/ping.xml
1 074 строки39 KB
Nicolai Dagestad
Fix ping man page syntax error
27 ноя 2024, 17:08
27 ноя 2024, 17:08e8c9d6d
<refentry xmlns="http://docbook.org/ns/docbook" version="5.0"
xml:id="man.ping">

  <refentryinfo>
    <title>ping</title>
    <productname>iputils</productname>
  </refentryinfo>

  <refmeta>
    <refentrytitle>
      <application>ping</application>
    </refentrytitle>
    <manvolnum>8</manvolnum>
    <refmiscinfo class='manual'>iputils</refmiscinfo>
  </refmeta>

  <refnamediv>
    <refname>ping</refname>
    <refpurpose>send ICMP ECHO_REQUEST to network
    hosts</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis sepchar=" ">
      <command>ping</command>
      <arg choice="opt" rep="norepeat">
        <option>-aAbBdCDfhHLnOqrRUvV346</option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-c
        <replaceable>count</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-e
        <replaceable>identifier</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-F
        <replaceable>flowlabel</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-i
        <replaceable>interval</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-I
        <replaceable>interface</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-l
        <replaceable>preload</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-m
        <replaceable>mark</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-M
        <replaceable>pmtudisc_option</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-N
        <replaceable>nodeinfo_option</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-w
        <replaceable>deadline</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-W
        <replaceable>timeout</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-p
        <replaceable>pattern</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-Q
        <replaceable>tos</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-s
        <replaceable>packetsize</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-S
        <replaceable>sndbuf</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-t
        <replaceable>ttl</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">
        <option>-T
        <replaceable>timestamp option</replaceable></option>
      </arg>
      <arg choice="opt" rep="norepeat">hop...</arg>
      <arg choice="req" rep="norepeat">destination</arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsection xml:id="description">
    <info>
      <title>DESCRIPTION</title>
    </info>
    <para>
    <command>ping</command> uses the ICMP protocol's mandatory
    ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a
    host or gateway. ECHO_REQUEST datagrams (“pings”) have an IP
    and ICMP header, followed by a struct timeval and then an
    arbitrary number of “pad” bytes used to fill out the
    packet.</para>
    <para>
    <command>ping</command> works with both IPv4 and IPv6. Using
    only one of them explicitly can be enforced by specifying
    <option>-4</option> or
    <option>-6</option>.</para>
    <para>
    <command>ping</command> can also send IPv6 Node Information
    Queries (RFC4620). Intermediate
    <emphasis remap="I">hop</emphasis>s may not be allowed, because
    IPv6 source routing was deprecated (RFC5095).</para>
  </refsection>

  <refsection xml:id="options">
    <info>
      <title>OPTIONS</title>
    </info>
    <variablelist remap="TP">
      <varlistentry>
        <term>
          <option>-3</option>
        </term>
        <listitem>
          <para>RTT precision (do not round up the result time).</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-4</option>
        </term>
        <listitem>
          <para>Use IPv4 only.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-6</option>
        </term>
        <listitem>
          <para>Use IPv6 only.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-a</option>
        </term>
        <listitem>
          <para>Audible ping.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-A</option>
        </term>
        <listitem>
          <para>Adaptive ping. Interpacket interval adapts to
          round-trip time, so that effectively not more than one
          (or more, if preload is set) unanswered probe is present
          in the network. The default interval is 2 ms,
          for more info see option <option>-i</option>.
          On networks with low RTT this mode is
          essentially equivalent to flood mode.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-b</option>
        </term>
        <listitem>
          <para>Allow pinging a broadcast address.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-B</option>
        </term>
        <listitem>
          <para>Do not allow
          <command>ping</command> to change source address of
          probes. The address is bound to one selected when
          <command>ping</command> starts.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-c</option>
          <emphasis remap="I">count</emphasis>
        </term>
        <listitem>
          <para>Stop after sending
          <emphasis remap="I">count</emphasis> ECHO_REQUEST packets.
          With
          <emphasis remap="I">deadline</emphasis> option,
          <command>ping</command> waits for
          <emphasis remap="I">count</emphasis> ECHO_REPLY packets,
          until the timeout expires.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-C</option>
        </term>
        <listitem>
          <para>Call connect() syscall on socket creation.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-d</option>
        </term>
        <listitem>
          <para>Set the SO_DEBUG option on the socket being used.
          Essentially, this socket option is not used by Linux
          kernel.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-D</option>
        </term>
        <listitem>
          <para>Print timestamp (unix time + microseconds as in
          gettimeofday) before each line.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-e</option>
          <emphasis remap="I">identifier</emphasis>
        </term>
        <listitem>
          <para>Set the identification field of ECHO_REQUEST.
          Value 0 implies using <emphasis remap="I">raw socket</emphasis>
          (not supported on <emphasis remap="I">ICMP datagram socket</emphasis>).
          The value of the field may be printed with <option>-v</option> option.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-f</option>
        </term>
        <listitem>
          <para>Flood ping. For every ECHO_REQUEST sent a period
          “.” is printed, while for every ECHO_REPLY received a
          backspace is printed. This provides a rapid display of
          how many packets are being dropped. If interval is not
          given, it sets interval to zero and outputs packets as
          fast as they come back or one hundred times per second,
          whichever is more. Only the super-user may use this
          option with zero interval.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-F</option>
          <emphasis remap="I">flow label</emphasis>
        </term>
        <listitem>
          <para>IPv6 only. Allocate and set 20 bit flow label (in
          hex) on echo request packets. If value is zero, kernel
          allocates random flow label.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-h</option>
        </term>
        <listitem>
          <para>Show help.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-H</option>
        </term>
        <listitem>
          <para>Force DNS name resolution for the output. Useful for numeric
          destination, or <option>-f</option> option, which by default do not
          perform it. It can also help to workaround DNS resolution problems.
          Override previously defined <option>-n</option> option.
          See also <emphasis remap="I">IPUTILS_PING_PTR_LOOKUP</emphasis>
          environment variable.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-i</option>
          <emphasis remap="I">interval</emphasis>
        </term>
        <listitem>
          <para>Wait
          <emphasis remap="I">interval</emphasis> seconds between
          sending each packet. Real number allowed with dot as
          a decimal separator (regardless locale setup).
          The default is to wait for one second between each packet
          normally, or not to wait in flood mode.
          Only super-user may set interval to values
          less than 2 ms. Broadcast and multicast ping have even
          higher limitation for regular user: minimum is 1 sec.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-I</option>
          <emphasis remap="I">interface</emphasis>
        </term>
        <listitem>
          <para>
          <emphasis remap="I">interface</emphasis> is either an
          address, an interface name or a VRF name. If
          <emphasis remap="I">interface</emphasis> is an address, it
          sets source address to specified interface address. If
          <emphasis remap="I">interface</emphasis> is an interface
          name, it sets source interface to specified interface.
          If <emphasis remap="I">interface</emphasis> is a VRF
          name, each packet is routed using the corresponding
          routing table; in this case, the <option>-I</option> option
          can be repeated to specify a source address.
          NOTE: For IPv6, when doing ping to a link-local scope
          address, link specification (by the '%'-notation in
          <emphasis remap="I">destination</emphasis>, or by this
          option) can be used but it is no longer required.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-l</option>
          <emphasis remap="I">preload</emphasis>
        </term>
        <listitem>
          <para>If
          <emphasis remap="I">preload</emphasis> is specified,
          <command>ping</command> sends that many packets not
          waiting for reply. Only the super-user may select preload
          more than 3.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-L</option>
        </term>
        <listitem>
          <para>Suppress loopback of multicast packets. This flag
          only applies if the ping destination is a multicast
          address.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-m</option>
          <emphasis remap="I">mark</emphasis>
        </term>
        <listitem>
          <para>use
          <emphasis remap="I">mark</emphasis> to tag the packets
          going out. This is useful for variety of reasons within
          the kernel such as using policy routing to select
          specific outbound processing. CAP_NET_ADMIN or CAP_NET_RAW
          (since Linux 5.17) capability is required, see
          <citerefentry>
            <refentrytitle>socket</refentrytitle>
            <manvolnum>7</manvolnum>
          </citerefentry>.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-M</option>
          <emphasis remap="I">pmtudisc_opt</emphasis>
        </term>
        <listitem>
          <para>Select Path MTU Discovery strategy.
          <emphasis remap="I">pmtudisc_option</emphasis> may be
          either
          <emphasis remap="I">do</emphasis> (set DF flag but
          subject to PMTU checks by kernel, packets too large will
          be rejected),
          <emphasis remap="I">want</emphasis> (do PMTU discovery,
          fragment locally when packet size is large),
          <emphasis remap="I">probe</emphasis> (set DF flag and
          bypass PMTU checks, useful for probing), or
          <emphasis remap="I">dont</emphasis> (do not set DF
          flag).</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-N</option>
          <emphasis remap="I">nodeinfo_option</emphasis>
        </term>
        <listitem>
          <para>IPv6 only. Send IPv6 Node Information Queries
          (RFC4620), instead of Echo Request. CAP_NET_RAW
          capability is required.</para>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">help</emphasis>
              </term>
              <listitem>
                <para>Show help for NI support.</para>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">name</emphasis>
              </term>
              <listitem>
                <para>Queries for Node Names.</para>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">ipv6</emphasis>
              </term>
              <listitem>
                <para>Queries for IPv6 Addresses. There are several
                IPv6 specific flags.</para>
                <variablelist remap="TP">
                  <varlistentry>
                    <term>
                      <emphasis remap="B">ipv6-global</emphasis>
                    </term>
                    <listitem>
                      <para>Request IPv6 global-scope
                      addresses.</para>
                    </listitem>
                  </varlistentry>
                </variablelist>
                <variablelist remap="TP">
                  <varlistentry>
                    <term>
                      <emphasis remap="B">ipv6-sitelocal</emphasis>
                    </term>
                    <listitem>
                      <para>Request IPv6 site-local
                      addresses.</para>
                    </listitem>
                  </varlistentry>
                </variablelist>
                <variablelist remap="TP">
                  <varlistentry>
                    <term>
                      <emphasis remap="B">ipv6-linklocal</emphasis>
                    </term>
                    <listitem>
                      <para>Request IPv6 link-local
                      addresses.</para>
                    </listitem>
                  </varlistentry>
                </variablelist>
                <variablelist remap="TP">
                  <varlistentry>
                    <term>
                      <emphasis remap="B">ipv6-all</emphasis>
                    </term>
                    <listitem>
                      <para>Request IPv6 addresses on other
                      interfaces.</para>
                    </listitem>
                  </varlistentry>
                </variablelist>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">ipv4</emphasis>
              </term>
              <listitem>
                <para>Queries for IPv4 Addresses. There is one IPv4
                specific flag.</para>
                <variablelist remap="TP">
                  <varlistentry>
                    <term>
                      <emphasis remap="B">ipv4-all</emphasis>
                    </term>
                    <listitem>
                      <para>Request IPv4 addresses on other
                      interfaces.</para>
                    </listitem>
                  </varlistentry>
                </variablelist>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">subject-ipv6=</emphasis><emphasis remap="I">ipv6addr</emphasis>
              </term>
              <listitem>
                <para>IPv6 subject address.</para>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">subject-ipv4=</emphasis><emphasis remap="I">ipv4addr</emphasis>
              </term>
              <listitem>
                <para>IPv4 subject address.</para>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">subject-name=</emphasis><emphasis remap="I">nodename</emphasis>
              </term>
              <listitem>
                <para>Subject name. If it contains more than one
                dot, fully-qualified domain name is assumed.</para>
              </listitem>
            </varlistentry>
          </variablelist>
          <variablelist remap="TP">
            <varlistentry>
              <term>
                <emphasis remap="B">subject-fqdn=</emphasis><emphasis remap="I">nodename</emphasis>
              </term>
              <listitem>
                <para>Subject name. Fully-qualified domain name is
                always assumed.</para>
              </listitem>
            </varlistentry>
          </variablelist>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-n</option>
        </term>
        <listitem>
          <para>Numeric output only. No attempt will be made to lookup
          symbolic names for host addresses (no reverse DNS resolution).
          This is the default for numeric destination or <option>-f</option>
          option.  Override previously defined <option>-H</option> option.
          See also <emphasis remap="I">IPUTILS_PING_PTR_LOOKUP</emphasis>
          environment variable.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-O</option>
        </term>
        <listitem>
          <para>Report outstanding ICMP ECHO reply before sending
          next packet. This is useful together with the timestamp
          <option>-D</option> to log output to a diagnostic file and
          search for missing answers.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-p</option>
          <emphasis remap="I">pattern</emphasis>
        </term>
        <listitem>
          <para>You may specify up to 16 “pad” bytes to fill out
          the packet you send. This is useful for diagnosing
          data-dependent problems in a network. For example,
          <option>-p ff</option> will cause the sent packet to be
          filled with all ones.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-q</option>
        </term>
        <listitem>
          <para>Quiet output. Nothing is displayed except the
          summary lines at startup time and when finished.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-Q</option>
          <emphasis remap="I">tos</emphasis>
        </term>
        <listitem>
          <para>Set Quality of Service -related bits in ICMP
          datagrams.
          <emphasis remap="I">tos</emphasis> can be decimal
          (<command>ping</command> only) or hex number.</para>
          <para>In RFC2474, these fields are interpreted as 8-bit
          Differentiated Services (DS), consisting of: bits 0-1 (2
          lowest bits) of separate data, and bits 2-7 (highest 6
          bits) of Differentiated Services Codepoint (DSCP). In
          RFC2481 and RFC3168, bits 0-1 are used for ECN.</para>
          <para>Historically (RFC1349, obsoleted by RFC2474), these
          were interpreted as: bit 0 (lowest bit) for reserved
          (currently being redefined as congestion control), 1-4
          for Type of Service and bits 5-7 (highest bits) for
          Precedence.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-r</option>
        </term>
        <listitem>
          <para>Bypass the normal routing tables and send directly
          to a host on an attached interface. If the host is not on
          a directly-attached network, an error is returned. This
          option can be used to ping a local host through an
          interface that has no route through it provided the
          option
          <option>-I</option> is also used.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-R</option>
        </term>
        <listitem>
          <para>
          <command>ping</command> only. Record route. Includes the
          RECORD_ROUTE option in the ECHO_REQUEST packet and
          displays the route buffer on returned packets. Note that
          the IP header is only large enough for nine such routes.
          Many hosts ignore or discard this option.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-s</option>
          <emphasis remap="I">packetsize</emphasis>
        </term>
        <listitem>
          <para>Specifies the number of data bytes to be sent. The
          default is 56, which translates into 64 ICMP data bytes
          when combined with the 8 bytes of ICMP header data.
          The maximum allowed value is 65507 for IPv4
          (65467 when <option>-R</option> or <option>-T</option>
          or Intermediate <emphasis remap="I">hop</emphasis>s)
          or 65527 for IPv6, but most systems
          limit this to a smaller, system-dependent number.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-S</option>
          <emphasis remap="I">sndbuf</emphasis>
        </term>
        <listitem>
          <para>Set socket sndbuf. If not specified, it is selected
          to buffer not more than one packet.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-t</option>
          <emphasis remap="I">ttl</emphasis>
        </term>
        <listitem>
          <para>
          <command>ping</command> only. Set the IP Time to
          Live.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-T</option>
          <emphasis remap="I">timestamp option</emphasis>
        </term>
        <listitem>
          <para>Set special IP timestamp options.
          <emphasis remap="I">timestamp option</emphasis> may be
          either
          <emphasis remap="I">tsonly</emphasis> (only timestamps),
          <emphasis remap="I">tsandaddr</emphasis> (timestamps and
          addresses) or
          <emphasis remap="I">tsprespec host1 [host2 [host3
          [host4]]]</emphasis> (timestamp prespecified hops).</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-U</option>
        </term>
        <listitem>
          <para>Print full user-to-user latency (the old
          behaviour). Normally
          <command>ping</command> prints network round trip time,
          which can be different f.e. due to DNS failures.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-v</option>
        </term>
        <listitem>
          <para>Verbose output. Do not suppress DUP replies when pinging
          multicast address.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-V</option>
        </term>
        <listitem>
          <para>Show version and exit.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-w</option>
          <emphasis remap="I">deadline</emphasis>
        </term>
        <listitem>
          <para>Specify a timeout, in seconds, before
          <command>ping</command> exits regardless of how many
          packets have been sent or received. In this case
          <command>ping</command> does not stop after
          <emphasis remap="I">count</emphasis> packet are sent, it
          waits either for
          <emphasis remap="I">deadline</emphasis> expire or until
          <emphasis remap="I">count</emphasis> probes are answered
          or for some error notification from network.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          <option>-W</option>
          <emphasis remap="I">timeout</emphasis>
        </term>
        <listitem>
          <para>Time to wait for a response, in seconds. The option
          affects only timeout in absence of any responses,
          otherwise
          <command>ping</command> waits for two RTTs.
          Real number allowed with dot as a decimal separator
          (regardless locale setup).
          0 means infinite timeout.</para>
        </listitem>
      </varlistentry>
    </variablelist>
    <para>When using
    <command>ping</command> for fault isolation, it should first be
    run on the local host, to verify that the local network
    interface is up and running. Then, hosts and gateways further
    and further away should be “pinged”. Round-trip times and
    packet loss statistics are computed. If duplicate packets are
    received, they are not included in the packet loss calculation,
    although the round trip time of these packets is used in
    calculating the minimum/average/maximum/mdev round-trip time
    numbers.</para>
    <para>Population standard deviation (mdev), essentially an
    average of how far each ping RTT is from the mean RTT. The
    higher mdev is, the more variable the RTT is (over time).
                                          With a high RTT
    variability, you will have speed issues with bulk transfers
    (they will take longer than is strictly speaking necessary, as
    the variability will eventually cause the sender to wait for
    ACKs) and you will have middling to poor VoIP quality.</para>
    <para>When the specified number of packets have been sent (and
    received) or if the program is terminated with a SIGINT, a
    brief summary is displayed. Shorter current statistics can be
    obtained without termination of process with signal
    SIGQUIT.</para>
    <para>This program is intended for use in network testing,
    measurement and management. Because of the load it can impose
    on the network, it is unwise to use
    <command>ping</command> during normal operations or from
    automated scripts.</para>
  </refsection>

  <refsection xml:id="environment">
    <info>
      <title>ENVIRONMENT</title>
    </info>
    <para><emphasis remap="I">IPUTILS_PING_PTR_LOOKUP</emphasis> environment
    variable set to 0 disable reverse DNS resolution (PTR lookup) by default.
    It will be overrided by <option>-H</option> or <option>-n</option> option.</para>
  </refsection>

  <refsection xml:id="exit_status">
    <info>
      <title>EXIT STATUS</title>
    </info>
    <para>If
    <command>ping</command> does not receive any reply packets at
    all it will exit with code 1. If a packet
    <emphasis remap="I">count</emphasis> and
    <emphasis remap="I">deadline</emphasis> are both specified, and
    fewer than
    <emphasis remap="I">count</emphasis> packets are received by the
    time the
    <emphasis remap="I">deadline</emphasis> has arrived, it will
    also exit with code 1. On other error it exits with code 2.
    Otherwise it exits with code 0. This makes it possible to use
    the exit code to see if a host is alive or not.</para>
  </refsection>

  <refsection xml:id="ipv6_link_local_destinations">
    <info>
      <title>IPV6 LINK-LOCAL DESTINATIONS</title>
    </info>
    <para>For IPv6, when the destination address has link-local scope and
    <command>ping</command> is using <emphasis remap="I">ICMP datagram sockets</emphasis>,
    the output interface must be specified.
    When <command>ping</command> is using <emphasis remap="I">raw sockets</emphasis>,
    it is not strictly necessary to specify the output interface but it should be done
    to avoid ambiguity when there are multiple possible output interfaces.</para>
    <para>There are two ways to specify the output interface:</para>
    <variablelist remap="TP">
      <varlistentry>
        <term>
          • using the
          <emphasis remap="I">% notation</emphasis>
        </term>
        <listitem>
        <para>The destination address is postfixed with
        <emphasis remap="I">%</emphasis>
         and the output interface name or ifindex, for example:</para>
        <para><command>ping fe80::5054:ff:fe70:67bc%eth0</command></para>
        <para><command>ping fe80::5054:ff:fe70:67bc%2</command></para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term>
          • using the
          <emphasis remap="I">-I option</emphasis>
        </term>
        <listitem>
          <para>When using <emphasis remap="I">ICMP datagram sockets</emphasis>,
          this method is supported since the following kernel versions: 5.17,
          5.15.19, 5.10.96, 5.4.176, 4.19.228, 4.14.265.
          Also it is not supported on musl libc.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsection>

  <refsection xml:id="icmp_packet_details">
    <info>
      <title>ICMP PACKET DETAILS</title>
    </info>
    <para>An IP header without options is 20 bytes. An ICMP
    ECHO_REQUEST packet contains an additional 8 bytes worth of
    ICMP header followed by an arbitrary amount of data. When a
    <emphasis remap="I">packetsize</emphasis> is given, this
    indicates the size of this extra piece of data (the default is
    56). Thus the amount of data received inside of an IP packet of
    type ICMP ECHO_REPLY will always be 8 bytes more than the
    requested data space (the ICMP header).</para>
    <para>If the data space is at least of size of struct timeval
    <command>ping</command> uses the beginning bytes of this space
    to include a timestamp which it uses in the computation of
    round trip times. If the data space is shorter, no round trip
    times are given.</para>
  </refsection>

  <refsection xml:id="duplicate_and_damaged_packets">
    <info>
      <title>DUPLICATE AND DAMAGED PACKETS</title>
    </info>
    <para>
    <command>ping</command> will report duplicate and damaged
    packets. Duplicate packets should never occur, and seem to be
    caused by inappropriate link-level retransmissions. Duplicates
    may occur in many situations and are rarely (if ever) a good
    sign, although the presence of low levels of duplicates may not
    always be cause for alarm.</para>
    <para>Damaged packets are obviously serious cause for alarm and
    often indicate broken hardware somewhere in the
    <command>ping</command> packet's path (in the network or in the
    hosts).</para>
  </refsection>

  <refsection xml:id="id_collisions">
    <info>
      <title>ID COLLISIONS</title>
    </info>
    <para>
    Unlike TCP and UDP, which use port to uniquely identify the recipient to
    deliver data, ICMP uses identifier field (ID) for identification.
    Therefore, if on the same machine, at the same time, two ping processes
    use the same ID, echo reply can be delivered to a wrong recipient.
    This is a known problem due to the limited size of the 16-bit ID field.
    That is a historical limitation of the protocol that cannot be fixed
    at the moment unless we encode an ID into the ping packet payload.
    <command>ping</command> prints <emphasis remap="I">DIFFERENT ADDRESS</emphasis>
    error and packet loss is negative.
    </para>
    <para>
    <command>ping</command> uses PID to get unique number.  The default value of
    <emphasis remap="I">/proc/sys/kernel/pid_max</emphasis> is 32768.
    On the systems that use ping heavily and with <emphasis remap="I">pid_max</emphasis>
    greater than 65535 collisions are bound to happen.
    </para>
  </refsection>

  <refsection xml:id="trying_different_data_patterns">
    <info>
      <title>TRYING DIFFERENT DATA PATTERNS</title>
    </info>
    <para>The (inter)network layer should never treat packets
    differently depending on the data contained in the data
    portion. Unfortunately, data-dependent problems have been known
    to sneak into networks and remain undetected for long periods
    of time. In many cases the particular pattern that will have
    problems is something that doesn't have sufficient
    “transitions”, such as all ones or all zeros, or a pattern
    right at the edge, such as almost all zeros. It isn't
    necessarily enough to specify a data pattern of all zeros (for
    example) on the command line because the pattern that is of
    interest is at the data link level, and the relationship
    between what you type and what the controllers transmit can be
    complicated.</para>
    <para>This means that if you have a data-dependent problem you
    will probably have to do a lot of testing to find it. If you
    are lucky, you may manage to find a file that either can't be
    sent across your network or that takes much longer to transfer
    than other similar length files. You can then examine this file
    for repeated patterns that you can test using the
    <option>-p</option> option of
    <command>ping</command>.</para>
  </refsection>

  <refsection xml:id="ttl_details">
    <info>
      <title>TTL DETAILS</title>
    </info>
    <para>The TTL value of an IP packet represents the maximum
    number of IP routers that the packet can go through before
    being thrown away. In current practice you can expect each
    router in the Internet to decrement the TTL field by exactly
    one.</para>
    <para>The TTL field for TCP packets may take various values.
    The maximum possible value of this field is 255, a recommended
    initial value is 64. For more information, see the TCP/Lower-Level
    Interface section of RFC9293.</para>
    <para>In normal operation <command>ping</command> prints the TTL
    value from the packet it receives. When a remote system receives
    a ping packet, it can do one of three things with the TTL field in
    its response:</para>
    <variablelist remap="TP">
      <varlistentry>
        <listitem>
          <para>• Not change it; this is what Berkeley Unix systems
          did before the 4.3BSD Tahoe release. In this case the TTL
          value in the received packet will be 255 minus the number
          of routers in the round-trip path.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <listitem>
          <para>• Set it to 255; this is what current Berkeley Unix
          systems do. In this case the TTL value in the received
          packet will be 255 minus the number of routers in the
          path
          <emphasis remap="B">from</emphasis> the remote system
          <emphasis remap="B">to</emphasis> the
          <command>ping</command>ing host.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <listitem>
          <para>• Set it to some other value. Some machines use the
          same value for ICMP packets that they use for TCP
          packets, for example either 30 or 60. Others may use
          completely wild values.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsection>

  <refsection xml:id="bugs">
    <info>
      <title>BUGS</title>
    </info>
    <variablelist remap="TP">
      <varlistentry>
        <listitem>
          <para>• Many Hosts and Gateways ignore the RECORD_ROUTE
          option.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <listitem>
          <para>• The maximum IP header length is too small for
          options like RECORD_ROUTE to be completely useful.
          There's not much that can be done about this,
          however.</para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <listitem>
          <para>• Flood pinging is not recommended in general, and
          flood pinging the broadcast address should only be done
          under very controlled conditions.</para>
        </listitem>
      </varlistentry>
    </variablelist>
  </refsection>

  <refsection xml:id="see_also">
    <info>
      <title>SEE ALSO</title>
    </info>
    <para>
    <citerefentry>
      <refentrytitle>ip</refentrytitle>
      <manvolnum>8</manvolnum>
    </citerefentry>,
    <citerefentry>
      <refentrytitle>ss</refentrytitle>
      <manvolnum>8</manvolnum>
    </citerefentry>.</para>
  </refsection>

  <refsection xml:id="history">
    <info>
      <title>HISTORY</title>
    </info>
    <para>The
    <command>ping</command> command appeared in 4.3BSD.</para>
    <para>The version described here is its descendant specific to
    Linux.</para>
    <para>As of version s20150815, the
    <emphasis remap="B">ping6</emphasis> binary doesn't exist
    anymore. It has been merged into
    <command>ping</command>. Creating a symlink named
    <emphasis remap="B">ping6</emphasis> pointing to
    <command>ping</command> will result in the same functionality as
    before.</para>
  </refsection>

  <refsection xml:id="security">
    <info>
      <title>SECURITY</title>
    </info>
    <para>
    <command>ping</command> requires CAP_NET_RAW capability to be
    executed 1) if the program is used for non-echo queries (see
    <option>-N</option> option) or when the identification field set to 0
    for ECHO_REQUEST (see <option>-e</option>), or
    2) if kernel does not support ICMP datagram sockets, or
    3) if the user is not allowed to create an ICMP echo socket.
    The program may be used as set-uid root.
    </para>
  </refsection>

  <refsection xml:id="availability">
    <info>
      <title>AVAILABILITY</title>
    </info>
    <para>
    <command>ping</command> is part of
    <emphasis remap="I">iputils</emphasis> package.</para>
  </refsection>
</refentry>