/
githubmirror
/
iproute2
Обзор
Документация
Войти
/
githubmirror
/
iproute2
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v7.0.0
bash-completion/dpll
320 строк
10 KB
Petr Oros
dpll: add mode setting support
30 янв 2026, 18:51
30 янв 2026, 18:51
f64542a
Код
Авторство
О чём код?
# bash completion for dpll(8) -*- shell-script -*- # Get all the optional commands for dpll _dpll_get_optional_commands() { local object=$1; shift local filter_options="" local options="$(dpll $object help 2>&1 \ | command sed -n -e "s/^.*dpll $object //p" \ | cut -d " " -f 1)" # Remove duplicate options from "dpll $OBJECT help" command local opt for opt in $options; do if [[ $filter_options =~ $opt ]]; then continue else filter_options="$filter_options $opt" fi done echo $filter_options } # Complete based on given word _dpll_direct_complete() { local device_id pin_id value case $1 in device_id) value=$(dpll -j device show 2>/dev/null \ | jq '.device[].id' 2>/dev/null) ;; pin_id) value=$(dpll -j pin show 2>/dev/null \ | jq '.pin[].id' 2>/dev/null) ;; module_name) value=$(dpll -j device show 2>/dev/null \ | jq -r '.device[]."module-name"' 2>/dev/null \ | sort -u) ;; esac echo $value } # Handle device subcommands _dpll_device() { local command=$1 case $command in show) case $prev in id) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete device_id)" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "id" -- "$cur" ) ) return 0 ;; esac ;; set) case $prev in id) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete device_id)" -- "$cur" ) ) return 0 ;; mode) COMPREPLY=( $( compgen -W "automatic manual" -- "$cur" ) ) return 0 ;; phase-offset-monitor) COMPREPLY=( $( compgen -W "enable disable true false 0 1" -- "$cur" ) ) return 0 ;; phase-offset-avg-factor) # numeric value, no completion return 0 ;; *) COMPREPLY=( $( compgen -W "id mode phase-offset-monitor \ phase-offset-avg-factor" -- "$cur" ) ) return 0 ;; esac ;; id-get) case $prev in module-name) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete module_name)" -- "$cur" ) ) return 0 ;; clock-id) # numeric value, no completion return 0 ;; type) COMPREPLY=( $( compgen -W "pps eec" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "module-name clock-id type" \ -- "$cur" ) ) return 0 ;; esac ;; esac } # Handle pin subcommands _dpll_pin() { local command=$1 case $command in show) case $prev in id) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete pin_id)" -- "$cur" ) ) return 0 ;; device) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete device_id)" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "id device" -- "$cur" ) ) return 0 ;; esac ;; set) case $prev in id|parent-device) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete device_id)" -- "$cur" ) ) return 0 ;; parent-pin|reference-sync) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete pin_id)" -- "$cur" ) ) return 0 ;; frequency|phase-adjust|esync-frequency|prio) # numeric value, no completion return 0 ;; direction) COMPREPLY=( $( compgen -W "input output" -- "$cur" ) ) return 0 ;; state) COMPREPLY=( $( compgen -W \ "connected disconnected selectable" -- "$cur" ) ) return 0 ;; *) # Check if we are in nested context (after parent-device/parent-pin/reference-sync) local i nested_keyword="" for (( i=cword-1; i>0; i-- )); do case "${words[i]}" in parent-device) nested_keyword="parent-device" break ;; parent-pin|reference-sync) nested_keyword="parent-pin" break ;; id|frequency|phase-adjust|esync-frequency) # Hit a top-level keyword, not in nested context break ;; esac done if [[ "$nested_keyword" == "parent-device" ]]; then COMPREPLY=( $( compgen -W "direction prio state" -- "$cur" ) ) elif [[ "$nested_keyword" == "parent-pin" ]]; then COMPREPLY=( $( compgen -W "state" -- "$cur" ) ) else COMPREPLY=( $( compgen -W "id frequency phase-adjust \ esync-frequency parent-device parent-pin reference-sync" \ -- "$cur" ) ) fi return 0 ;; esac ;; id-get) case $prev in module-name) COMPREPLY=( $( compgen -W \ "$(_dpll_direct_complete module_name)" -- "$cur" ) ) return 0 ;; clock-id) # numeric value, no completion return 0 ;; board-label|panel-label|package-label) # string value, no completion return 0 ;; type) COMPREPLY=( $( compgen -W "mux ext synce-eth-port \ int-oscillator gnss" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "module-name clock-id \ board-label panel-label package-label type" \ -- "$cur" ) ) return 0 ;; esac ;; esac } # Handle monitor subcommand _dpll_monitor() { # monitor has no additional arguments return 0 } # Complete any dpll command _dpll() { local cur prev words cword local opt='--Version --json --pretty' local objects="device pin monitor" _init_completion || return # Gets the word-to-complete without considering the colon as word breaks _get_comp_words_by_ref -n : cur prev words cword if [[ $cword -eq 1 ]]; then case $cur in -*) COMPREPLY=( $( compgen -W "$opt" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "$objects help" -- "$cur" ) ) return 0 ;; esac fi # Deal with options if [[ $prev == -* ]]; then case $prev in -V|--Version) return 0 ;; -j|--json) COMPREPLY=( $( compgen -W "--pretty $objects" -- "$cur" ) ) return 0 ;; *) COMPREPLY=( $( compgen -W "$objects" -- "$cur" ) ) return 0 ;; esac fi # Remove all options so completions don't have to deal with them. local i for (( i=1; i < ${#words[@]}; )); do if [[ ${words[i]::1} == - ]]; then words=( "${words[@]:0:i}" "${words[@]:i+1}" ) [[ $i -le $cword ]] && cword=$(( cword - 1 )) else i=$(( ++i )) fi done local object=${words[1]} local command=${words[2]} local pprev=${words[cword - 2]} local prev=${words[cword - 1]} case $object in device|pin|monitor) if [[ $cword -eq 2 ]]; then COMPREPLY=( $( compgen -W "help" -- "$cur") ) if [[ $object != "monitor" ]]; then COMPREPLY+=( $( compgen -W \ "$(_dpll_get_optional_commands $object)" -- "$cur" ) ) fi else "_dpll_$object" $command fi ;; help) return 0 ;; *) COMPREPLY=( $( compgen -W "$objects help" -- "$cur" ) ) ;; esac } && complete -F _dpll dpll # ex: ts=4 sw=4 et filetype=sh