githubmirror/gnutls

tests/scripts/common.sh
269 строк5 KB
Daiki Ueno
tests: detect faketime at configure time
12 июл 2023, 08:53
12 июл 2023, 08:53c57d770
# Copyright (C) 2011-2016 Free Software Foundation, Inc.
# Copyright (C) 2015-2016 Red Hat, Inc.
#
# This file is part of GnuTLS.
#
# The launch_server() function was contributed by Cedric Arbogast.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This file is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this file.  If not, see <https://www.gnu.org/licenses/>.

export TZ="UTC"

# Check for a utility to list ports.  Both ss and netstat will list
# ports for normal users, and have similar semantics, so put the
# command in the caller's PFCMD, or exit, indicating an unsupported
# test.  Prefer ss from iproute2 over the older netstat.
have_port_finder() {
	# Prefer PFCMD if set
	if test "${PFCMD+set}" = set; then
		return
	fi

	if (ss --version) > /dev/null 2>&1; then
		PFCMD=ss
		return
	fi

	# 'ss' might be installed in /sbin
	for dir in /sbin /usr/sbin /usr/local/sbin; do
		if ($dir/ss --version) > /dev/null 2>&1; then
			PFCMD=$dir/ss
			return
		fi
	done

	# We can't assume netstat --version for portability reasons
	if (type netstat) > /dev/null 2>&1; then
		PFCMD=netstat
		return
	fi

	echo "neither ss nor netstat found" 1>&2
	exit 77
}

reserve_port() {
	local PORT=$1
	mkdir "$abs_top_builddir/tests/port.lock.d.$PORT" > /dev/null 2>&1 || return 1
	echo "reserved port $PORT"
	trap "unreserve_port $PORT" 0 1 15 2
}

unreserve_port() {
	local PORT=$1
	echo "unreserved port $PORT"
	rmdir "$abs_top_builddir/tests/port.lock.d.$PORT" > /dev/null 2>&1 || :
}

check_if_port_in_use() {
	local PORT=$1
	reserve_port $PORT
	have_port_finder
	if ! $PFCMD -an|grep "[\:\.]$PORT" >/dev/null 2>&1; then
		return 1
	fi
	unreserve_port $PORT
}

check_if_port_listening() {
	local PORT=$1
	have_port_finder
	$PFCMD -anl|grep "[\:\.]$PORT"|grep LISTEN >/dev/null 2>&1
}

# Find a port number not currently in use.
GETPORT='
    rc=0
    while test $rc = 0; do
        unset myrandom
        if test -n "$RANDOM"; then myrandom=$(($RANDOM + $RANDOM)); fi
        if test -z "$myrandom"; then myrandom=$(date +%N | sed s/^0*//); fi
        if test -z "$myrandom"; then myrandom=0; fi
        PORT="$(((($$<<15)|$myrandom) % 63001 + 2000))"
        check_if_port_in_use $PORT;rc=$?
    done
'

skip_if_no_datefudge() {
	if test "$ac_cv_faketime_works" != yes; then
		exit 77
	fi
}

fail() {
   PID="$1"
   shift
   echo "Failure: $1" >&2
   [ -n "${PID}" ] && kill ${PID}
   exit 1
}

exit_if_non_x86()
{
	if (lscpu --version) >/dev/null 2>&1 && \
	    ! lscpu 2>/dev/null | grep 'Architecture:[	 ]*x86' >/dev/null; then
		echo "non-x86 CPU detected"
		exit
	fi
}

exit_if_non_padlock()
{
	if (lscpu --version) >/dev/null 2>&1 && \
	   ! lscpu 2>/dev/null | grep 'Flags:[	 ]*phe' >/dev/null; then
		echo "non-Via padlock CPU detected"
		exit
	fi
}

wait_for_port()
{
	local ret
	local PORT="$1"
	sleep 1

	local i=0
	while test $i -lt 90; do
		check_if_port_listening ${PORT}
		ret=$?
		if test $ret = 0;then
			break
		fi
		i=`expr $i + 1`
		check_if_port_in_use ${PORT}
		echo "try $i: waiting for port"
		sleep 2
	done
	return $ret
}

wait_for_free_port()
{
	local ret
	local PORT="$1"

	for i in 1 2 3 4 5 6;do
		check_if_port_in_use ${PORT}
		ret=$?
		if test $ret != 0;then
			break
		else
			sleep 2
		fi
	done
	return $ret
}

launch_bare_server() {
	wait_for_free_port "$PORT"
	"$@" >${LOGFILE-/dev/null} &
}

launch_server() {
	launch_bare_server $VALGRIND $SERV $DEBUG -p "$PORT" "$@"
}

wait_server() {
	local PID=$1
	trap "test -n \"${PID}\" && kill ${PID}; exit 1" 1 15 2
	wait_for_port $PORT
	if test $? != 0;then
		echo "Server $PORT did not come up"
		kill $PID
		exit 1
	fi
}

wait_udp_server() {
	local PID=$1
	trap "test -n \"${PID}\" && kill ${PID};exit 1" 1 15 2
	sleep 4
}

create_testdir() {
	local PREFIX=$1
	d=`mktemp -d -t ${PREFIX}.XXXXXX`
	if test $? -ne 0; then
		d=${TMPDIR}/${PREFIX}.$$
		mkdir "$d" || exit 1
	fi
	trap "test -e \"$d\" && rm -rf \"$d\"" 1 15 2
	echo "$d"
}

wait_for_file() {
	local filename="$1"
	local timeout="$2"

	local loops=$((timeout * 10)) loop=0

	while test $loop -lt $loops; do
		[ -f "$filename" ] && {
			#allow file to be written to
			sleep 0.2
			return 1
		}
		sleep 0.1
		loop=$((loop+1))
	done
	return 0
}

# Kill a process quietly
# @1: signal, e.g. -9
# @2: pid
kill_quiet() {
	local sig="$1"
	local pid="$2"

	sh -c "kill $sig $pid 2>/dev/null"
	return $?
}

# Terminate a process first using SIGTERM, wait 1s and if still avive use
# SIGKILL
# @1: pid
terminate_proc() {
	local pid="$1"

	local ctr=0

	kill_quiet -15 $pid
	while [ $ctr -lt 10 ]; do
		sleep 0.1
		kill -0 $pid 2>/dev/null
		[ $? -ne 0 ] && return
		ctr=$((ctr + 1))
	done
	kill_quiet -9 $pid
	sleep 0.1
}

# $1, $2: the two files to check for equality
# $3: Strings to be ignored, separated by |
check_if_equal() {
	if test -n "$3"; then
		local tmp1=`basename "$1"`"1.tmp"
		local tmp2=`basename "$2"`"2.tmp"
		egrep -v "$3" "$1" | tr -d '\r' >"$tmp1"
		egrep -v "$3" "$2" | tr -d '\r' >"$tmp2"
		diff -b -B "$tmp1" "$tmp2"
		local rc=$?
		rm -f "$tmp1" "$tmp2"
		return $rc
	fi

	diff -b -B "$1" "$2"
	return $?
}