make/common/MakeBase.gmk - master - githubmirror/galahad

make/common/MakeBase.gmk
322 строки12 KB
Daniel D. Daugherty
8368714: [BACKOUT] JDK-8368468 Split out everything but configure results from spec.gmk
25 сен 2025, 23:55
25 сен 2025, 23:55648582a
#
# Copyright (c) 2011, 2025, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#

MAKEBASE_INCLUDED := true

include MakeIncludeStart.gmk
ifeq ($(INCLUDE), true)

################################################################################
# MakeBase provides the core functionality needed and used by all makefiles. It
# should be included by all makefiles. MakeBase provides essential
# functionality for named parameter functions, variable dependency, tool
# execution, logging and fixpath functionality.
################################################################################

# By defining this pseudo target, make will automatically remove targets
# if their recipe fails so that a rebuild is automatically triggered on the
# next make invocation.
.DELETE_ON_ERROR:

################################################################################
# Definitions for special characters
################################################################################

# When calling macros, the spaces between arguments are
# often semantically important! Sometimes we need to subst
# spaces and commas, therefore we need the following macros.
X :=
SPACE := $(X) $(X)
COMMA := ,
DOLLAR := $$
HASH := \#
LEFT_PAREN := (
RIGHT_PAREN := )
SQUOTE := '
#'
DQUOTE := "
#"
define NEWLINE


endef

# Certain features only work in newer version of GNU Make. The build will still
# function in 3.81, but will be less performant.
ifeq (4.0, $(firstword $(sort 4.0 $(MAKE_VERSION))))
  HAS_FILE_FUNCTION := true
  CORRECT_FUNCTION_IN_RECIPE_EVALUATION := true
  RWILDCARD_WORKS := true
endif

# For convenience, MakeBase.gmk continues to include these separate files, at
# least for now.
# Utils.gmk must be included before FileUtils.gmk, since it uses some of the
# basic utility functions there.
include $(TOPDIR)/make/common/Utils.gmk
include $(TOPDIR)/make/common/FileUtils.gmk

################################################################################
# Make sure we have a value (could be overridden on command line by caller)
CREATING_BUILDJDK ?= false

################################################################################

define SetupLogging
  ifeq ($$(LOG_PROFILE_TIMES_FILE), true)
    ifeq ($$(IS_GNU_TIME), yes)
      SHELL :=  $$(BASH) $$(TOPDIR)/make/scripts/shell-profiler.sh \
                gnutime $$(TIME) \
                $$(OUTPUTDIR)/build-profile.log $$(SHELL)
    else ifneq ($$(FLOCK), )
      SHELL :=  $$(BASH) $$(TOPDIR)/make/scripts/shell-profiler.sh \
                flock $$(FLOCK) \
                $$(OUTPUTDIR)/build-profile.log $$(SHELL)
    endif
  endif

  ifneq ($$(findstring $$(LOG_LEVEL), debug trace), )
    SHELL := $$(SHELL) -x
  endif

  ifeq ($$(LOG_LEVEL), trace)
    SHELL_NO_RECURSE := $$(SHELL)
    # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
    # For each target executed, will print
    # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
    # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
    # (and causing a crash on Cygwin).
    SHELL = $$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(SHELL_NO_RECURSE) -x
  endif

  # The LOG_PREFIX is set for sub recursive calls like buildjdk and bootcycle.
  # The warn level can never be turned off
  LogWarn = $$(info $(LOG_PREFIX)$$(strip $$1))
  LOG_WARN :=
  ifneq ($$(findstring $$(LOG_LEVEL), info debug trace), )
    LogInfo = $$(info $(LOG_PREFIX)$$(strip $$1))
    LOG_INFO :=
  else
    LogInfo =
    LOG_INFO := > /dev/null
  endif
  ifneq ($$(findstring $$(LOG_LEVEL), debug trace), )
    LogDebug = $$(info $(LOG_PREFIX)$$(strip $$1))
    LOG_DEBUG :=
  else
    LogDebug =
    LOG_DEBUG := > /dev/null
  endif
  ifneq ($$(findstring $$(LOG_LEVEL), trace), )
    LogTrace = $$(info $(LOG_PREFIX)$$(strip $$1))
    LOG_TRACE :=
  else
    LogTrace =
    LOG_TRACE := > /dev/null
  endif
endef

# Make sure logging is setup for everyone that includes MakeBase.gmk.
$(eval $(call SetupLogging))

################################################################################

MAX_PARAMS := 96
PARAM_SEQUENCE := $(call sequence, 2, $(MAX_PARAMS))

# Template for creating a macro taking named parameters. To use it, assign the
# template to a variable with the name you want for your macro, using '='
# assignment. Then define a macro body with the suffix "Body". The Body macro
# should take 1 parameter which should be a unique string for that invocation
# of the macro.
# Ex:
# SetupFoo = $(NamedParamsMacroTemplate)
# define SetupFooBody
#   # do something
#   # access parameters as $$($1_BAR)
# endef
# Call it like this
# $(eval $(call SetupFoo, BUILD_SOMETHING, \
#     BAR := some parameter value, \
# ))
define NamedParamsMacroTemplate
  $(if $($(MAX_PARAMS)), $(error Internal makefile error: \
      Too many named arguments to macro, please update MAX_PARAMS in MakeBase.gmk))
  # Iterate over 2 3 4... and evaluate the named parameters with $1_ as prefix
  $(foreach i, $(PARAM_SEQUENCE), $(if $(strip $($i)), \
    $(strip $1)_$(strip $(call EscapeHash, $(call DoubleDollar, $($i))))$(NEWLINE)))
  # Debug print all named parameter names and values
  $(if $(findstring $(LOG_LEVEL), trace), \
    $(info $0 $(strip $1) $(foreach i, $(PARAM_SEQUENCE), \
      $(if $(strip $($i)),$(NEWLINE) $(strip [$i] $(if $(filter $(LOG_LEVEL), trace), \
        $($i), $(wordlist 1, 20, $($(i))) $(if $(word 21, $($(i))), ...)))))))

  $(if $(DEBUG_$(strip $1)),
    $(info -------- <<< Begin expansion of $(strip $1)) \
    $(info $(call $(0)Body,$(strip $1))) \
    $(info -------- >>> End expansion of $(strip $1)) \
  )

  $(call $(0)Body,$(strip $1))
endef

################################################################################
# FixPath
#
# On Windows, converts a path from cygwin/unix style (e.g. /bin/foo) into
# "mixed mode" (e.g. c:/cygwin/bin/foo). On other platforms, return the path
# unchanged.
# This also converts a colon-separated list of paths to a semicolon-separated
# list.
# This is normally not needed since we use the FIXPATH prefix for command lines,
# but might be needed in certain circumstances.
#
# FixPathFile is the file version of FixPath. It instead takes a file with paths in $1
# and outputs the 'fixed' paths into the file in $2. If the file in $2 already exists
# it is overwritten.
# On non-Windows platforms this instead does a copy, so that $2 can still be used
# as a depenendency of a make rule, instead of having to conditionally depend on
# $1 instead, based on the target platform.
ifeq ($(call isTargetOs, windows), true)
  FixPath = \
    $(strip $(subst \,\\, $(shell $(FIXPATH_BASE) print $(patsubst $(FIXPATH), , $1))))
  FixPathFile = \
    $(shell $(FIXPATH_BASE) convert $1 $2)
else
  FixPath = \
      $1
  FixPathFile = \
      $(shell $(CP) $1 $2)
endif

################################################################################
# DependOnVariable
#
# This macro takes a variable name and puts the value in a file only if the
# value has changed since last. The name of the file is returned. This can be
# used to create rule dependencies on make variable values. The following
# example would get rebuilt if the value of SOME_VAR was changed:
#
# path/to/some-file: $(call DependOnVariable, SOME_VAR)
#         echo $(SOME_VAR) > $@
#
# Note that leading and trailing white space in the value is ignored.
#

# Defines the sub directory structure to store variable value file in
DependOnVariableDirName = \
    $(strip $(addsuffix $(if $(MODULE),/$(MODULE)), \
        $(subst $(WORKSPACE_ROOT)/,, $(if $(filter /%, $(firstword $(MAKEFILE_LIST))), \
          $(firstword $(MAKEFILE_LIST)), \
          $(CURDIR)/$(firstword $(MAKEFILE_LIST))))))

# Defines the name of the file to store variable value in. Generates a name
# unless parameter 2 is given.
# Param 1 - Name of variable
# Param 2 - (optional) name of file to store value in
DependOnVariableFileName = \
    $(strip $(if $(strip $2), $2, \
      $(MAKESUPPORT_OUTPUTDIR)/vardeps/$(DependOnVariableDirName)/$(strip $1).vardeps))

# Writes the vardeps file. Assumes $1_filename has been setup
# Param 1 - Name of variable
DependOnVariableWriteFile = \
    $(call MakeDir, $(dir $($1_filename))) \
    $(call WriteFile, $1_old := $(call DoubleDollar,$(call EscapeHash,$($1))), \
        $($1_filename)) \

# Does the actual work with parameters stripped.
# If the file exists AND the contents is the same as the variable, do nothing
# else print a new file.
# Always returns the name of the file where the value was printed.
# Param 1 - Name of variable
# Param 2 - (optional) name of file to store value in
DependOnVariableHelper = \
    $(strip \
        $(eval $1_filename := $(call DependOnVariableFileName, $1, $2)) \
        $(if $(wildcard $($1_filename)), \
          $(eval include $($1_filename)) \
          $(if $(call equals, $(strip $($1)), $(strip $($1_old))),, \
            $(if $(findstring $(LOG_LEVEL), trace), \
                $(info NewVariable $1: >$(strip $($1))<) \
                $(info OldVariable $1: >$(strip $($1_old))<) \
            ) \
            $(call DependOnVariableWriteFile,$1) \
          ) \
        , \
          $(call DependOnVariableWriteFile,$1) \
        ) \
        $($1_filename) \
    )

# Main macro
# Param 1 - Name of variable
# Param 2 - (optional) name of file to store value in
DependOnVariable = \
    $(call DependOnVariableHelper,$(strip $1),$(strip $2))

# LogCmdlines is only intended to be used by ExecuteWithLog
ifeq ($(LOG_CMDLINES), true)
  LogCmdlines = $(info $(strip $1))
else
  LogCmdlines =
endif

# Check if the command line contains redirection, that is <, > or >>,
# and if so, return a value that is interpreted as true in a make $(if)
# construct.
is_redirect = \
    $(if $(filter < > >>, $1), true)

################################################################################
# ExecuteWithLog will run a command and log the output appropriately. This is
# meant to be used by commands that do "real" work, like a compilation.
# The output is stored in a specified log file, which is displayed at the end
# of the build in case of failure. The  command line itself is stored in a file,
# and also logged to stdout if the LOG=cmdlines option has been given.
#
# Param 1 - The path to base the name of the log file / command line file on
# Param 2 - The command to run
ExecuteWithLog = \
  $(call LogCmdlines, Executing: \
      [$(if $(call is_redirect, $2),$(LEFT_PAREN) )$(strip $2)$(if $(call \
      is_redirect, $2), $(RIGHT_PAREN))]) \
  $(call MakeDir, $(dir $(strip $1)) $(MAKESUPPORT_OUTPUTDIR)/failure-logs) \
  $(call WriteFile, $2, $(strip $1).cmdline) \
  ( $(RM) $(strip $1).log && \
      $(if $(call is_redirect, $2),$(LEFT_PAREN) )$(strip $2)$(if $(call \
      is_redirect, $2), $(RIGHT_PAREN)) \
      > >($(TEE) -a $(strip $1).log) 2> >($(TEE) -a $(strip $1).log >&2) || \
      ( exitcode=$(DOLLAR)? && \
      $(CP) $(strip $1).log $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst \
      /,_,$(patsubst $(OUTPUTDIR)/%,%,$(strip $1))).log && \
      $(CP) $(strip $1).cmdline $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst \
      /,_,$(patsubst $(OUTPUTDIR)/%,%,$(strip $1))).cmdline && \
      exit $(DOLLAR)exitcode ) )

################################################################################

include MakeIncludeEnd.gmk
endif # include guard