/
githubmirror
/
flashrom
Обзор
Документация
Войти
/
githubmirror
/
flashrom
Код
Запросы
0
Пакеты
0
Релизы
0
Аналитика
Безопасность
v1.2.1
flashchips.c
18 470 строк
474 KB
Bernhard Urban-Forster
flashchips: Add Spansion S25FL512S
09 фев 2020, 09:21
09 фев 2020, 09:21
05c629b
Код
Авторство
О чём код?
/* * This file is part of the flashrom project. * * Copyright (C) 2000 Silicon Integrated System Corporation * Copyright (C) 2004 Tyan Corp * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> * Copyright (C) 2006-2009 Carl-Daniel Hailfinger * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" /** * List of supported flash chips. * * Temporarily, this file is sorted alphabetically by vendor and name to * assist with merging the Chromium fork of flashrom. * * The usual intention is that that this list is sorted by vendor, then chip * family and chip density, which is useful for the output of 'flashrom -L'. */ const struct flashchip flashchips[] = { /* * .vendor = Vendor name * .name = Chip name * .bustype = Supported flash bus types (Parallel, LPC...) * .manufacture_id = Manufacturer chip ID * .model_id = Model chip ID * .total_size = Total size in (binary) kbytes * .page_size = Page or eraseblock(?) size in bytes * .tested = Test status * .probe = Probe function * .probe_timing = Probe function delay * .block_erasers[] = Array of erase layouts and erase functions * { * .eraseblocks[] = Array of { blocksize, blockcount } * .block_erase = Block erase function * } * .printlock = Chip lock status function * .unlock = Chip unlock function * .write = Chip write function * .read = Chip read function * .voltage = Voltage range in millivolt */ { .vendor = "AMD", .name = "Am29F002(N)BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F002BB, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "AMD", .name = "Am29F002(N)BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F002BT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "AMD", .name = "Am29F010", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F010, .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F010A/B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F010, .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F016D", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F016D, .total_size = 2 * 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F040", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F040B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F080", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F080, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29F080B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29F080, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMD", .name = "Am29LV001BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV001BB, .total_size = 128, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {16 * 1024, 7}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV001BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV001BT, .total_size = 128, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 7}, {4 * 1024, 2}, {8 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV002BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV002BB, .total_size = 256, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV002BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV002BT, .total_size = 256, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV004BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV004BB, .total_size = 512, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "AMD", .name = "Am29LV004BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV004BT, .total_size = 512, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "AMD", .name = "Am29LV008BB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV008BB, .total_size = 1024, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 15}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV008BT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV008BT, .total_size = 1024, .page_size = 64 * 1024, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, { .vendor = "AMD", .name = "Am29LV040B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ }, { .vendor = "AMD", .name = "Am29LV081B", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, .model_id = AMD_AM29LV080B, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, { .vendor = "AMIC", .name = "A25L010", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 32 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 2 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 128 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L016", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L016, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 512 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L020", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 64 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 4 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 256 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L032", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L032, .total_size = 4096, .page_size = 256, /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 1024 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L040", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 128 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 8 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 512 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L05PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L05PT, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L05PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L05PU, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L080", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L080, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 256 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 16 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 1024 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L10PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L10PT, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 1}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L10PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L10PU, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 1}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L16PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L16PT, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L16PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L16PU, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 31}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L20PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L20PT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L20PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L20PU, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, /* The A25L40P{T,U} chips are distinguished by their * erase block layouts, but without any distinction in RDID. * This inexplicable quirk was verified by Rudolf Marek * and discussed on the flashrom mailing list on 2010-07-12. */ { .vendor = "AMIC", .name = "A25L40PT", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L40PT, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L40PU", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L512", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 16 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 1 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 64 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25L80P", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = AMIC_A25L80P, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 15}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25LQ032/A25LQ32A", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, /* A25LQ32A supports SFDP */ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 1024 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25LQ16", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ16, .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 512 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A25LQ64", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ64, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 2048 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 256 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 128 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 8192 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 8192 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "AMIC", .name = "A29002B", .bustype = BUS_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMIC", .name = "A29002T", .bustype = BUS_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMIC", .name = "A29040B", .bustype = BUS_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A29040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "AMIC", .name = "A49LF040A", .bustype = BUS_LPC, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A49LF040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Atmel", .name = "AT25DF021", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF021, .total_size = 256, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT25DF021A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF021A, .total_size = 256, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 3600}, }, { .vendor = "Atmel", .name = "AT25DF041A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF041A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT25DF081", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF081, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ }, { .vendor = "Atmel", .name = "AT25DF081A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF081A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25DF161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, /*The AT26DF321 has the same ID as the AT25DF321. */ { .vendor = "Atmel", .name = "AT25DF321", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF321, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25DF321A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF321A, .total_size = 4096, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25DF641(A)", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF641, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25DL081", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DF081, .total_size = 1024, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ .voltage = {1650, 1950}, }, { .vendor = "Atmel", .name = "AT25DL161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DL161, .total_size = 2048, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ .voltage = {1650, 1950}, }, { .vendor = "Atmel", .name = "AT25DQ161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25DQ161, .total_size = 2048, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", /* The A suffix indicates 33MHz instead of 20MHz clock rate. * All other properties seem to be the same.*/ .name = "AT25F1024(A)", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F1024, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f, .unlock = spi_disable_blockprotect_at25f, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25F2048", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F2048, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f, .unlock = spi_disable_blockprotect_at25f, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25F4096", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F4096, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f4096, /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25F512", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f, .unlock = spi_disable_blockprotect_at25f, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25F512A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F512A, .total_size = 64, .page_size = 128, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_at25f, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f512a, /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ .unlock = spi_disable_blockprotect_at25f512a, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25F512B", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25F512B, .total_size = 64, .page_size = 256, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_62, } }, .printlock = spi_prettyprint_status_register_at25f512b, .unlock = spi_disable_blockprotect_at25f512b, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25FS010", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25FS010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25fs010, .unlock = spi_disable_blockprotect_at25fs010, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25FS040", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25FS040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25fs040, .unlock = spi_disable_blockprotect_at25fs040, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT25SF041", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SF041, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2500, 3600}, }, { .vendor = "Atmel", .name = "AT25SF081", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SF081, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Atmel", .name = "AT25SF161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SF161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2500, 3600}, }, { .vendor = "Atmel", .name = "AT25SF321", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SF321, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2500, 3600}, }, { .vendor = "Atmel", .name = "AT25SL128A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SL128A, .total_size = 16384, .page_size = 256, /* supports SFDP */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 2000}, }, { .vendor = "Atmel", .name = "AT26DF041", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT26DF041, .total_size = 512, .page_size = 256, /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 2048} }, .block_erase = spi_block_erase_81, }, { .eraseblocks = { {2 * 1024, 256} }, .block_erase = spi_block_erase_50, }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, } }, .printlock = spi_prettyprint_status_register_plain, /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ .write = spi_chip_write_1, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ }, { .vendor = "Atmel", .name = "AT26DF081A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT26DF081A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at26df081a, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT26DF161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT26DF161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT26DF161A", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT26DF161A, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_at26df081a, .unlock = spi_disable_blockprotect_at2x_global_unprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT26F004", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT26F004, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .write = NULL, /* Incompatible Page write */ .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT29C010A", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT29C010A, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, /* FIXME */ .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT29C020", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT29C020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10000, /* 10ms */ .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT29C040A", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT29C040A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10000, /* 10 ms */ .block_erasers = { { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT29C512", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT29C512, .total_size = 64, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10000, /* 10mS, Enter=Exec */ .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT45CS1282", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45CS1282, .total_size = 16896, /* No power of two sizes */ .page_size = 1056, /* No power of two sizes */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ .feature_bits = FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1056, 1}, /* sector 0a: opcode 50h */ {248 * 1056, 1}, /* sector 0b: opcode 7Ch */ {256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */ }, .block_erase = spi_erase_at45cs_sector, } }, .printlock = spi_prettyprint_status_register_plain, .write = spi_write_at45db, .read = spi_read_at45db, .voltage = {2700, 3600}, .gran = write_gran_1056bytes, }, { .vendor = "Atmel", .name = "AT45DB011D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB011D, .total_size = 128, /* or 132, determined from status register */ .page_size = 256, /* or 264, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 512} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 256, 512/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 256, 1}, {120 * 256, 1}, {128 * 256, 3}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT45DB021D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB021D, .total_size = 256, /* or 264, determined from status register */ .page_size = 256, /* or 264, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 1024} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 256, 1024/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 256, 1}, {120 * 256, 1}, {128 * 256, 7}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT45DB041D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB041D, .total_size = 512, /* or 528, determined from status register */ .page_size = 256, /* or 264, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 2048} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 256, 2048/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 256, 1}, {248 * 256, 1}, {256 * 256, 7}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT45DB081D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB081D, .total_size = 1024, /* or 1056, determined from status register */ .page_size = 256, /* or 264, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 4096} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 256, 4096/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 256, 1}, {248 * 256, 1}, {256 * 256, 15}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT45DB161D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB161D, .total_size = 2048, /* or 2112, determined from status register */ .page_size = 512, /* or 528, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 4096} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 512, 4096/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 512, 1}, {248 * 512, 1}, {256 * 512, 15}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT45DB321C", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB321C, .total_size = 4224, /* No power of two sizes */ .page_size = 528, /* No power of two sizes */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ .feature_bits = FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {528, 8192} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 528, 8192/8} }, .block_erase = spi_erase_at45db_block, }, /* Although the datasheets describes sectors (which can be write protected) * there seems to be no erase functions for them. { .eraseblocks = { {8 * 528, 1}, {120 * 528, 1}, {128 * 528, 63}, }, .block_erase = spi_erase_at45db_sector }, */ { .eraseblocks = { {4224 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ .write = spi_write_at45db, .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ .voltage = {2700, 3600}, .gran = write_gran_528bytes, }, { .vendor = "Atmel", .name = "AT45DB321D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB321D, .total_size = 4096, /* or 4224, determined from status register */ .page_size = 512, /* or 528, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 8192} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 512, 8192/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 512, 1}, {120 * 512, 1}, {128 * 512, 63}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, { .vendor = "Atmel", .name = "AT45DB321E", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB321C, .total_size = 4096, /* or 4224, determined from status register */ .page_size = 512, /* or 528, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 8192} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 512, 8192/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 512, 1}, {120 * 512, 1}, {128 * 512, 63}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */ }, { .vendor = "Atmel", .name = "AT45DB642D", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT45DB642D, .total_size = 8192, /* or 8448, determined from status register */ .page_size = 1024, /* or 1056, determined from status register */ /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ .feature_bits = FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_at45db, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {1024, 8192} }, .block_erase = spi_erase_at45db_page, }, { .eraseblocks = { {8 * 1024, 8192/8} }, .block_erase = spi_erase_at45db_block, }, { .eraseblocks = { {8 * 1024, 1}, {248 * 1024, 1}, {256 * 1024, 31}, }, .block_erase = spi_erase_at45db_sector }, { .eraseblocks = { {8192 * 1024, 1} }, .block_erase = spi_erase_at45db_chip, } }, .printlock = spi_prettyprint_status_register_at45db, .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ /* granularity will be set by the probing function. */ .write = spi_write_at45db, .read = spi_read_at45db, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT49(H)F010", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F010, .total_size = 128, .page_size = 0, /* unused */ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_at49f, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49BV512", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49BV512, .total_size = 64, .page_size = 64, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Atmel", .name = "AT49F002(N)", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F002N, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49F002(N)T", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F002NT, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49F020", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F020, .total_size = 256, .page_size = 0, /* unused */ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } /* Chip features an optional permanent write protection * of the first 8 kB. The erase function is the same as * above, but 00000H to 01FFFH will not be erased. * FIXME: add another eraser when partial erasers are * supported. */ }, .printlock = printlock_at49f, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49F040", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F040, .total_size = 512, .page_size = 0, /* unused */ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } /* Chip features an optional permanent write protection * of the first 16 kB. The erase function is the same as * above, but 00000H to 03FFFH will not be erased. * FIXME: add another eraser when partial erasers are * supported. */ }, .printlock = printlock_at49f, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49F080", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F080, .total_size = 1024, .page_size = 0, /* unused */ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } /* Chip features an optional permanent write protection * of the first 16 kB. The erase function is the same as * above, but 00000H to 03FFFH will not be erased. * FIXME: add another eraser when partial erasers are * supported. */ }, .printlock = printlock_at49f, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { /* 'top' version of AT49F080. equal in all aspects but the boot block address */ .vendor = "Atmel", .name = "AT49F080T", .bustype = BUS_PARALLEL, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49F080T, .total_size = 1024, .page_size = 0, /* unused */ .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } /* Chip features an optional permanent write protection * of the first 16 kB. The erase function is the same as * above, but FC000H to FFFFFH will not be erased. * FIXME: add another eraser when partial erasers are * supported. */ }, .printlock = printlock_at49f, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Atmel", .name = "AT49LH002", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49LH002, .total_size = 256, .page_size = 0, /* unused */ .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = NULL, /* TODO: Implement. */ }, { .eraseblocks = { {64 * 1024, 4}, }, .block_erase = erase_block_82802ab, }, }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Atmel", .name = "AT49LH004", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49LH004, .total_size = 512, .page_size = 0, /* unused */ .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = NULL, /* TODO: Implement. */ }, }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Atmel", .name = "AT49LH00B4", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT49LH00B4, .total_size = 512, .page_size = 0, /* unused */ .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 2}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = NULL, /* TODO: Implement. */ }, { .eraseblocks = { {64 * 1024, 8}, }, .block_erase = erase_block_82802ab, }, }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Bright", .name = "BM29F040", .bustype = BUS_PARALLEL, .manufacture_id = BRIGHT_ID, .model_id = BRIGHT_BM29F040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Catalyst", .name = "CAT28F512", .bustype = BUS_PARALLEL, .manufacture_id = CATALYST_ID, .model_id = CATALYST_CAT28F512, .total_size = 64, .page_size = 0, /* unused */ .feature_bits = 0, .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD}, .probe = probe_jedec, /* FIXME! */ .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = NULL, /* TODO */ }, }, .write = NULL, /* TODO */ .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "ENE", .name = "KB9012 (EDI)", .bustype = BUS_SPI, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_ERASED_ZERO, .tested = TEST_OK_PREW, .spi_cmd_set = SPI_EDI, .probe = edi_probe_kb9012, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {128, 1024} }, .block_erase = edi_chip_block_erase, }, }, .write = edi_chip_write, .read = edi_chip_read, .voltage = {2700, 3600}, .gran = write_gran_128bytes, }, { .vendor = "ESI", .name = "ES25P16", .bustype = BUS_SPI, .manufacture_id = EXCEL_ID_NOPREFIX, .model_id = EXCEL_ES25P16, .total_size = 2 * 1024, .page_size = 256, /* 256-byte parameter page separate from memory array: * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast Read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "ESI", .name = "ES25P40", .bustype = BUS_SPI, .manufacture_id = EXCEL_ID_NOPREFIX, .model_id = EXCEL_ES25P40, .total_size = 512, .page_size = 256, /* 256-byte parameter page separate from memory array: * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast Read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "ESI", .name = "ES25P80", .bustype = BUS_SPI, .manufacture_id = EXCEL_ID_NOPREFIX, .model_id = EXCEL_ES25P80, .total_size = 1024, .page_size = 256, /* 256-byte parameter page separate from memory array: * supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast Read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "ESMT", .name = "F25L008A", .bustype = BUS_SPI, .manufacture_id = ESMT_ID, .model_id = ESMT_F25L008A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "ESMT", .name = "F25L32PA", .bustype = BUS_SPI, .manufacture_id = ESMT_ID, .model_id = ESMT_F25L32PA, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_bpl, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "ESMT", .name = "F49B002UA", .bustype = BUS_PARALLEL, .manufacture_id = ESMT_ID, .model_id = ESMT_F49B002UA, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Eon", .name = "EN25B05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B05T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 3}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B10T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 3}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 31}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B16T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 3} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B20T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 63}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B32T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 63}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 7} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B40T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 127}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B64T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2}, {8 * 1024, 1}, {16 * 1024, 1}, {32 * 1024, 1}, {64 * 1024, 15} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25B80T", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {16 * 1024, 1}, {8 * 1024, 1}, {4 * 1024, 2}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F05, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25F80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25F80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P05", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P32", /* Uniform version of EN25B32 */ .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25P80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25Q128", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q128, .total_size = 16384, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, }, { /* Note: EN25D16 is an evil twin which shares the model ID but has different write protection capabilities */ .vendor = "Eon", .name = "EN25Q16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q16, .total_size = 2048, .page_size = 256, /* OTP: D16 512B/Q16 128B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { /* not supported by Q16 version */ .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25Q32(A/B)", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q32, .total_size = 4096, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25Q40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q40, .total_size = 512, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25Q64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q64, .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25Q80(A)", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25Q80, .total_size = 1024, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25QH128", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25QH128, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25QH16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25QH16, .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 2048, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 2048, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25QH32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25QH32, .total_size = 4096, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 4096, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 4096, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25QH64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25QH64, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN25S10", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S10, .total_size = 128, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S16", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S16, .total_size = 2048, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_en25s_wp, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S20", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S20, .total_size = 256, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S32", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S32, .total_size = 4096, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_en25s_wp, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S40", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S40, .total_size = 512, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S64", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S64, .total_size = 8192, .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8192 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8192 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_en25s_wp, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN25S80", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = EON_EN25S80, .total_size = 1024, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Eon", .name = "EN29F002(A)(N)B", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29F002B, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Eon", .name = "EN29F002(A)(N)T", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29F002T, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Eon", .name = "EN29F010", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29F010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Eon", .name = "EN29GL064(A)B", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29GL064B, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN29GL064(A)T", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29GL064T, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN29GL064H/L", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29GL064HL, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN29GL128", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29GL128HL, .total_size = 16384, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {128 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Eon", .name = "EN29LV040(A)", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29LV040, .total_size = 512, .page_size = 4 * 1024, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R and 55R, others 2.7-3.6V */ }, { .vendor = "Eon", .name = "EN29LV640B", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, .model_id = EON_EN29LV640B, .total_size = 8192, .page_size = 8192, .feature_bits = FEATURE_ADDR_SHIFTED, .tested = TEST_OK_PREW, .probe = probe_en29lv640b, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127}, }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_en29lv640b, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Fujitsu", .name = "MBM29F004BC", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29F004BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = NULL, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Fujitsu", .name = "MBM29F004TC", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29F004TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = NULL, .read = read_memmapped, .voltage = {4500, 5500}, }, { /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ .vendor = "Fujitsu", .name = "MBM29F400BC", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29F400BC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "Fujitsu", .name = "MBM29F400TC", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29F400TC, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, { .vendor = "Fujitsu", .name = "MBM29LV160BE", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29LV160BE, .total_size = 2 * 1024, .page_size = 0, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 31}, }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, /* Supports a fast mode too */ .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ }, { .vendor = "Fujitsu", .name = "MBM29LV160TE", .bustype = BUS_PARALLEL, .manufacture_id = FUJITSU_ID, .model_id = FUJITSU_MBM29LV160TE, .total_size = 2 * 1024, .page_size = 0, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, /* Supports a fast mode too */ .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ }, { .vendor = "GigaDevice", .name = "GD25B128B/GD25Q128B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q128, .total_size = 16384, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25LQ128C/GD25LQ128D", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ128CD, .total_size = 16384, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25LQ16", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ16, .total_size = 2048, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25LQ32", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ32, .total_size = 4096, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25LQ40", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ40, .total_size = 512, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25LQ64(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ64, .total_size = 8192, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25LQ80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ80, .total_size = 1024, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, }, { .vendor = "GigaDevice", .name = "GD25Q10", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q127C/GD25Q128C", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q128, .total_size = 16384, .page_size = 256, /* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */ /* QPI: enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */ .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q16(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q16, .total_size = 2048, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q20(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q256D", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q256D, .total_size = 32768, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q32(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q32, .total_size = 4096, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q40(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q512", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q64(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q64, .total_size = 8192, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25Q80(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q80, .total_size = 1024, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25T80, .total_size = 1024, .page_size = 256, /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", .name = "GD25VQ16C", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25VQ16C, .total_size = 2 * 1024, .page_size = 256, /* Supports SFDP */ /* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "GigaDevice", .name = "GD25VQ21B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25VQ21B, .total_size = 256, .page_size = 256, /* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "GigaDevice", .name = "GD25VQ40C", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25VQ41B, .total_size = 512, .page_size = 256, /* Supports SFDP */ /* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "GigaDevice", .name = "GD25VQ41B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25VQ41B, .total_size = 512, .page_size = 256, /* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "GigaDevice", .name = "GD25VQ80C", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25VQ80C, .total_size = 1024, .page_size = 256, /* Supports SFDP */ /* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "Hyundai", .name = "HY29F002B", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, .model_id = HYUNDAI_HY29F002B, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ }, { .vendor = "Hyundai", .name = "HY29F002T", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, .model_id = HYUNDAI_HY29F002T, .total_size = 256, .page_size = 256 * 1024, .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ }, { .vendor = "Hyundai", .name = "HY29F040A", .bustype = BUS_PARALLEL, .manufacture_id = HYUNDAI_ID, .model_id = HYUNDAI_HY29F040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "ISSI", .name = "IS25LP064", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25LP064, .total_size = 8192, .page_size = 256, /* OTP: 1024B total; read 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "ISSI", .name = "IS25LP128", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25LP128, .total_size = 16384, .page_size = 256, /* OTP: 1024B total; read 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "ISSI", .name = "IS25LP256", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25LP256, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, /* could also use spi_block_erase_d7 */ }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "ISSI", .name = "IS25WP032", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP032, .total_size = 4096, .page_size = 256, /* OTP: 1024B total; read 0x48; write 0x42 */ /* QPI enable 0x35, disable 0xF5 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "ISSI", .name = "IS25WP064", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP064, .total_size = 8192, .page_size = 256, /* OTP: 1024B total; read 0x48; write 0x42 */ /* QPI enable 0x35, disable 0xF5 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "ISSI", .name = "IS25WP128", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP128, .total_size = 16384, .page_size = 256, /* OTP: 1024B total; read 0x48; write 0x42 */ /* QPI enable 0x35, disable 0xF5 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "ISSI", .name = "IS25WP256", .bustype = BUS_SPI, .manufacture_id = ISSI_ID_SPI, .model_id = ISSI_IS25WP256, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, /* could also use spi_block_erase_d7 */ }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "ISSI", .name = "IS29GL064B", .bustype = BUS_PARALLEL, .manufacture_id = ISSI_ID, .model_id = ISSI_PMC_IS29GL064B, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ISSI", .name = "IS29GL064H/L", .bustype = BUS_PARALLEL, .manufacture_id = ISSI_ID, .model_id = ISSI_PMC_IS29GL064HL, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ISSI", .name = "IS29GL064T", .bustype = BUS_PARALLEL, .manufacture_id = ISSI_ID, .model_id = ISSI_PMC_IS29GL064T, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ISSI", .name = "IS29GL128H/L", .bustype = BUS_PARALLEL, .manufacture_id = ISSI_ID, .model_id = ISSI_PMC_IS29GL128HL, .total_size = 16384, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {128 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F160S33B8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F160S33B8, .total_size = 2048, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 31} // inaccessible }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F160S33T8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F160S33T8, .total_size = 2048, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {64 * 1024, 31}, // inaccessible {8 * 1024, 8} }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F320S33B8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F320S33B8, .total_size = 4096, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 63} // inaccessible }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F320S33T8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F320S33T8, .total_size = 4096, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {64 * 1024, 63}, // inaccessible {8 * 1024, 8} }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F640S33B8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F640S33B8, .total_size = 8192, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127} // inaccessible }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "25F640S33T8", .bustype = BUS_SPI, .manufacture_id = INTEL_ID, .model_id = INTEL_25F640S33T8, .total_size = 8192, .page_size = 256, /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 8 so-called "parameter blocks" with * opcode 0x40. Trying to access an address outside these 8 8kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {64 * 1024, 127}, // inaccessible {8 * 1024, 8} }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, .unlock = spi_disable_blockprotect_bp2_ep_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* also fast read 0x0B */ .voltage = {2700, 3600}, }, { .vendor = "Intel", .name = "28F001BN/BX-B", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F001B, .total_size = 128, .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {112 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Intel", .name = "28F001BN/BX-T", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F001T, .total_size = 128, .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {112 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Intel", .name = "28F002BC/BL/BV/BX-T", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F002T, .total_size = 256, .page_size = 256 * 1024, .tested = TEST_OK_PRE, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "28F004B5/BE/BV/BX-B", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004B, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 3}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "28F004B5/BE/BV/BX-T", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004T, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 3}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "28F008S3/S5/SC", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F004S3, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, }, }, .unlock = unlock_28f004s5, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "28F400BV/BX/CE/CV-B", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F400B, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .feature_bits = FEATURE_ADDR_SHIFTED, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 3}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "28F400BV/BX/CE/CV-T", .bustype = BUS_PARALLEL, .manufacture_id = INTEL_ID, .model_id = INTEL_28F400T, .total_size = 512, .page_size = 128 * 1024, /* maximal block size */ .feature_bits = FEATURE_ADDR_SHIFTED, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {128 * 1024, 3}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, }, .write = write_82802ab, .read = read_memmapped, }, { .vendor = "Intel", .name = "82802AB", .bustype = BUS_FWH, .manufacture_id = INTEL_ID, .model_id = INTEL_82802AB, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, }, }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Intel", .name = "82802AC", .bustype = BUS_FWH, .manufacture_id = INTEL_ID, .model_id = INTEL_82802AC, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, }, }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Macronix", .name = "MX23L12854", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX23L12854, .total_size = 16384, .page_size = 256, .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {3000, 3600}, }, { .vendor = "Macronix", .name = "MX23L1654", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX23L1654, .total_size = 2048, .page_size = 256, .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {3000, 3600}, }, { .vendor = "Macronix", .name = "MX23L3254", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX23L3254, .total_size = 4096, .page_size = 256, .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {3000, 3600}, }, { .vendor = "Macronix", .name = "MX23L6454", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX23L6454, .total_size = 8192, .page_size = 256, .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {3000, 3600}, }, { .vendor = "Macronix", .name = "MX25L1005(C)/MX25L1006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1005, .total_size = 128, .page_size = 256, /* MX25L1006E supports SFDP */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L12805D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L12805D, .total_size = 16384, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L12835F/MX25L12845E/MX25L12865E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L12805D, .total_size = 16384, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L1605", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L1605A/MX25L1606E/MX25L1608E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L1605D/MX25L1608D/MX25L1673E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L1635D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1635D, .total_size = 2048, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L1635E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1635E, .total_size = 2048, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L2005(C)/MX25L2006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L2005, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L25635F/MX25L25645G", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L25635F, .total_size = 32768, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L3205(A)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L3205D/MX25L3208D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L3206E/MX25L3208E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L3235D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3235D, .total_size = 4096, .page_size = 256, /* OTP: 256B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L3273E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L4005(A/C)/MX25L4006E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L4005, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L512(E)/MX25V512(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L512, .total_size = 64, .page_size = 256, /* MX25L512E supports SFDP */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ }, { .vendor = "Macronix", .name = "MX25L6405", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, /* Has an additional 512B EEPROM sector */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L6405D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, /* OTP: 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L6406E/MX25L6408E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, /* MX25L6406E supports SFDP */ /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L6495F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6495F, .total_size = 8192, .page_size = 256, /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L8005, .total_size = 1024, .page_size = 256, /* MX25L8006E, MX25L8008E support SFDP */ /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */ .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ }, { .vendor = "Macronix", .name = "MX25R6435F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25R6435F, .total_size = 8192, .page_size = 256, /* OTP: 1024B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 3600}, }, { .vendor = "Macronix", .name = "MX25U12835F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U12835E, .total_size = 16384, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U1635E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U1635E, .total_size = 2048, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U25635F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U25635F, .total_size = 32768, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U3235E/F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U3235E, .total_size = 4096, .page_size = 256, /* F model supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U51245G", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U51245G, .total_size = 65536, .page_size = 256, /* OTP: 512B factory programmed and 512B customer programmed; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U6435E/F", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U6435E, .total_size = 8192, .page_size = 256, /* F model supports SFDP */ /* OTP: 512B total; enter 0xB1, exit 0xC1 */ /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX25U8032E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U8032E, .total_size = 1024, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1650, 2000}, }, { .vendor = "Macronix", .name = "MX29F001B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F001B, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 1}, {4 * 1024, 2}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F001T", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F001T, .total_size = 128, .page_size = 32 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 1}, {32 * 1024, 1}, {8 * 1024, 2}, {4 * 1024, 2}, {8 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F002(N)B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F002(N)T", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F022(N)B", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F022B, .total_size = 256, .page_size = 0, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F022(N)T", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F022T, .total_size = 256, .page_size = 0, /* unused */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29F040", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29F040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Macronix", .name = "MX29GL128F", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL128F, .total_size = 16384, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {128 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL320EB", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL320EB, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 63}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL320EH/L", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL320EHL, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL320ET", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL320ET, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 63}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL640EB", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL640EB, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL640EH/L", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL640EHL, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29GL640ET", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29GL640ET, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX29LV040", .bustype = BUS_PARALLEL, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX29LV040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Macronix", .name = "MX66L51235F/MX25L51245G", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX66L51235F, .total_size = 65536, .page_size = 256, /* OTP: 512B total; enter 0xB1, exit 0xC1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, /* The ST M25P05 is a bit of a problem. It has the same ID as the * ST M25P05-A in RES mode, but supports only 128 byte writes instead * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 * only is successful if RDID does not work. */ { .vendor = "Micron/Numonyx/ST", .name = "M25P05", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_1, /* 128 */ .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P05-A", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P05A, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, /* The ST M25P10 has the same problem as the M25P05. */ { .vendor = "Micron/Numonyx/ST", .name = "M25P10", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_1, /* 128 */ .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P10-A", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P10A, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P128", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P128, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P16", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", /* Numonyx */ .name = "M25P20", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P20-old", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P20_RES, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P32", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", /* Numonyx */ .name = "M25P40", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P40-old", .bustype = BUS_SPI, .manufacture_id = 0, /* Not used. */ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P64", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25P80", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25P80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PE10", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PE16", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PE20", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PE40", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PE80", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PE80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PX16", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PX16, .total_size = 2048, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 512 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PX32", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PX32, .total_size = 4096, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 1024 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PX64", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PX64, .total_size = 8192, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 2048 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M25PX80", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M25PX80, .total_size = 1024, .page_size = 256, /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 4 * 1024, 256 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M45PE10", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M45PE10, .total_size = 128, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 512} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M45PE16", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M45PE16, .total_size = 2048, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 8192} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M45PE20", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M45PE20, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 1024} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M45PE40", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M45PE40, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 2048} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, /* Page write supported (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "M45PE80", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M45PE80, .total_size = 1024, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 4096} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q00A..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q00A__1G, .total_size = 131072, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 4} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q00A..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q00A__3G, .total_size = 131072, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 4} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q016", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q016__1E, .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q032..1E", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q032__1E, .total_size = 4096, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q032..3E", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q032__3E, .total_size = 4096, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q064__1E, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q064__3E, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q128__1E, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q128__3E, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q256..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q256__1E, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q256..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q256__3E, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q512..1G", /* ..1G = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q512__1G, .total_size = 65536, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 2} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron/Numonyx/ST", .name = "N25Q512..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q512__3G, .total_size = 65536, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 2} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QL01G", /* L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q00A__3G, .total_size = 131072, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4096} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 4096} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 2} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QU01G", /* U = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q00A__1G, .total_size = 131072, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 32768} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4096} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 4096} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 2048} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 2} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron", .name = "MT25QL02G", /* L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_MT25QL02G, .total_size = 262144, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 65536} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 65536} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8192} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 8192} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4096} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 4096} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 4} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QU02G", /* U = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_MT25QU02G, .total_size = 262144, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 65536} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 65536} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8192} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 8192} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4096} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 4096} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 4} }, .block_erase = spi_block_erase_c4, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron", .name = "MT25QU128", /* U = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q128__1E, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron", .name = "MT25QL128", /* L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q128__3E, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QL256", /* L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q256__3E, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QU256", /* U = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q256__1E, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {32768 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "Micron", .name = "MT25QL512", /* L = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q512__3G, .total_size = 65536, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {65536 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Micron", .name = "MT25QU512", /* U = 1.8V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q512__1G, .total_size = 65536, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 16384} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_5c, }, { .eraseblocks = { {32 * 1024, 2048} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 1024} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {65536 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, { .eraseblocks = { {65536 * 1024, 1} }, .block_erase = spi_block_erase_60, } }, .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1700, 2000}, }, { .vendor = "MoselVitelic", .name = "V29C51000B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29C51000B, .total_size = 64, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29C51000T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29C51000T, .total_size = 64, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29C51400B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29C51400B, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29C51400T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29C51400T, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29LC51000", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29LC51000, .total_size = 64, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29LC51001", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29LC51001, .total_size = 128, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "MoselVitelic", .name = "V29LC51002", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = MVC_V29LC51002, .total_size = 256, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {512, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Nantronics", .name = "N25S10", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, .model_id = NANTRONICS_N25S10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Nantronics", .name = "N25S16", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, .model_id = NANTRONICS_N25S16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Nantronics", .name = "N25S20", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, .model_id = NANTRONICS_N25S20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Nantronics", .name = "N25S40", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, .model_id = NANTRONICS_N25S40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Nantronics", .name = "N25S80", .bustype = BUS_SPI, .manufacture_id = NANTRONICS_ID_NOPREFIX, .model_id = NANTRONICS_N25S80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LD010(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LD010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ }, { .vendor = "PMC", .name = "Pm25LD020(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LD020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ }, { .vendor = "PMC", .name = "Pm25LD040(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ }, { .vendor = "PMC", .name = "Pm25LD256C", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LD256C, .total_size = 32, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 8} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LD512(C)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LD512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "PMC", .name = "Pm25LQ016", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LQ016, .total_size = 2048, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "PMC", .name = "Pm25LQ020", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LQ020, .total_size = 256, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "PMC", .name = "Pm25LQ032C", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LQ032C, .total_size = 4096, .page_size = 256, /* OTP: 64B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LQ040", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LQ040, .total_size = 512, .page_size = 256, /* OTP: 256B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "PMC", .name = "Pm25LQ080", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LQ080, .total_size = 1024, .page_size = 256, /* OTP: 64B total; read 0x4B, write 0xB1 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2300, 3600}, }, { .vendor = "PMC", .name = "Pm25LV010", .bustype = BUS_SPI, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV010A", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV016B", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV016B, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV020", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV040", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV080B", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = PMC_PM25LV080B, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm25LV512(A)", .bustype = BUS_SPI, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM25LV512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm29F002B", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM29F002B, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {96 * 1024, 1}, {128 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "PMC", .name = "Pm29F002T", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM29F002T, .total_size = 256, .page_size = 8 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "PMC", .name = "Pm39LV010", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm39LV020", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM39LV020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm39LV040", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM39LV040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm39LV512", .bustype = BUS_PARALLEL, .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM39LV512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "PMC", .name = "Pm49FL002", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM49FL002, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .unlock = unlock_regspace2_uniform_32k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "PMC", .name = "Pm49FL004", .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ .manufacture_id = PMC_ID_NOPREFIX, .model_id = PMC_PM49FL004, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST25LF020A", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF020_REMS, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25LF040A", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST25LF080(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF080_REMS, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST25VF010(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF010_REMS, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF016B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF016B, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25vf016, .unlock = spi_disable_blockprotect, .write = spi_aai_write, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF020", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF020_REMS, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, /* only */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF020B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF020B, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */ .unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */ .write = spi_aai_write, /* AAI supported (0xAD) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF032B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_aai_write, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF040B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25vf040b, .unlock = spi_disable_blockprotect, .write = spi_aai_write, /* AAI supported (0xAD) */ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF040B.REMS", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF040B_REMS, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25vf040b, .unlock = spi_disable_blockprotect, .write = spi_aai_write, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF064C", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF064C, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF080B", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ .unlock = spi_disable_blockprotect, .write = spi_aai_write, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25VF512(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25VF512_REMS, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST25WF010", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25WF010, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {1024 * 128, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 128, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF020", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25WF020, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 256, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 256, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF020A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, /* See flashchips.h */ .model_id = SST_SST25WF020A, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_tb_bpl, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF040", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25WF040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 512, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 512, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF040B", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, /* See flashchips.h */ .model_id = SST_SST25WF040B, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_tb_bpl, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF080", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25WF080, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF080B", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, /* See flashchips.h */ .model_id = SST_SST25WF080B, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp2_tb_bpl, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST25WF512", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST25WF512, .total_size = 64, .page_size = 256, .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 2} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {1024 * 64, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 64, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, }, { .vendor = "SST", .name = "SST26VF016B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST26VF016B, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {8 * 1024, 4}, {32 * 1024, 1}, {64 * 1024, 30}, {32 * 1024, 1}, {8 * 1024, 4}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect_sst26_global_unprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST26VF032B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST26VF032B, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {8 * 1024, 4}, {32 * 1024, 1}, {64 * 1024, 62}, {32 * 1024, 1}, {8 * 1024, 4}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect_sst26_global_unprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST26VF064B(A)", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = SST_SST26VF064B, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {8 * 1024, 4}, {32 * 1024, 1}, {64 * 1024, 126}, {32 * 1024, 1}, {8 * 1024, 4}, }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect_sst26_global_unprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST28SF040A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST28SF040, .total_size = 512, .page_size = 256, .feature_bits = 0, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ .block_erasers = { { .eraseblocks = { {128, 4096} }, .block_erase = erase_sector_28sf040, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_28sf040, } }, .unlock = unprotect_28sf040, .write = write_28sf040, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST29EE010", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST29EE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST29EE020A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST29EE020A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST29LE010", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST29LE010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST29LE020", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST29LE020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST39SF010A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39SF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST39SF020A", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39SF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST39SF040", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39SF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST39SF512", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39SF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SST", .name = "SST39VF010", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39VF010, .total_size = 128, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST39VF020", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39VF020, .total_size = 256, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST39VF040", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39VF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST39VF080", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39VF080, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST39VF512", .bustype = BUS_PARALLEL, .manufacture_id = SST_ID, .model_id = SST_SST39VF512, .total_size = 64, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "SST", .name = "SST49LF002A/B", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF002A, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ } }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF003A/B", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF003A, .total_size = 384, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 96} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 6} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {384 * 1024, 1} }, .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ } }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) * and is only honored for 64k block erase, but not 4k sector erase. */ .vendor = "SST", .name = "SST49LF004A/B", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF004A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ }, }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF004C", .bustype = BUS_FWH, .manufacture_id = SST_ID, .model_id = SST_SST49LF004C, .total_size = 512, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_1, .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF008A", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF008A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ } }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF008C", .bustype = BUS_FWH, .manufacture_id = SST_ID, .model_id = SST_SST49LF008C, .total_size = 1024, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 15}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_1, .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF016C", .bustype = BUS_FWH, .manufacture_id = SST_ID, .model_id = SST_SST49LF016C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_1, .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF020", .bustype = BUS_LPC, .manufacture_id = SST_ID, .model_id = SST_SST49LF020, .total_size = 256, .page_size = 16 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = NULL, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF020A", .bustype = BUS_LPC, .manufacture_id = SST_ID, .model_id = SST_SST49LF020A, .total_size = 256, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PRE, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = NULL, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF040", .bustype = BUS_LPC, .manufacture_id = SST_ID, .model_id = SST_SST49LF040, .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = NULL, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF040B", .bustype = BUS_LPC, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150ns */ .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = NULL, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF080A", .bustype = BUS_LPC, /* A/A Mux */ .manufacture_id = SST_ID, .model_id = SST_SST49LF080A, .total_size = 1024, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = NULL, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SST", .name = "SST49LF160C", .bustype = BUS_LPC, .manufacture_id = SST_ID, .model_id = SST_SST49LF160C, .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = erase_sector_49lfxxxc, }, { .eraseblocks = { {64 * 1024, 31}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_1, .unlock = unlock_regspace2_block_eraser_1, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "ST", .name = "M29F002B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F002B, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ }, { .vendor = "ST", .name = "M29F002T/NT", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F002T, .total_size = 256, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ }, { .vendor = "ST", .name = "M29F040B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ .vendor = "ST", .name = "M29F400BB", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F400BB, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 7}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ .vendor = "ST", .name = "M29F400BT", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29F400BT, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt .block_erasers = { { .eraseblocks = { {64 * 1024, 7}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "ST", .name = "M29W010B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W010B, .total_size = 128, .page_size = 16 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ST", .name = "M29W040B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ST", .name = "M29W512B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, .model_id = ST_M29W512B, .total_size = 64, .page_size = 64 * 1024, .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "ST", .name = "M50FLW040A", .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW040A, .total_size = 512, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {64 * 1024, 5}, /* block */ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FLW040B", .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW040B, .total_size = 512, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ {64 * 1024, 5}, /* block */ {4 * 1024, 16}, /* sector */ }, .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FLW080A", .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW080A, .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {64 * 1024, 13}, /* block */ {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ }, .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FLW080B", .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FLW080B, .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_FIXME, .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, /* sector */ {4 * 1024, 16}, /* sector */ {64 * 1024, 13}, /* block */ {4 * 1024, 16}, /* sector */ }, .block_erase = erase_sector_stm50, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FW002", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW002, .total_size = 256, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = NULL, /* Only in A/A mux mode */ } }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FW016", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW016, .total_size = 2048, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FW040", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW040, .total_size = 512, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50FW080", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50FW080, .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50LPW080", .bustype = BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50LPW080, .total_size = 1024, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_block_82802ab, } }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M50LPW116", .bustype = BUS_LPC, /* A/A Mux */ .manufacture_id = ST_ID, .model_id = ST_M50LPW116, .total_size = 2048, .page_size = 0, .feature_bits = FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {4 * 1024, 16}, {64 * 1024, 30}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_block_82802ab, } }, .printlock = printlock_regspace2_block_eraser_0, .unlock = unlock_regspace2_block_eraser_0, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, { .vendor = "ST", .name = "M95M02", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_M95M02, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_NO_ERASE | FEATURE_ERASED_ZERO, .tested = TEST_OK_PREW, .probe = probe_spi_st95, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_emulation, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect_bp1_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2500, 5500}, }, { .vendor = "Sanyo", .name = "LE25FU106B", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FU106B, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { /* FIXME: Is this correct? { .eraseblocks = { {2 * 1024, 64} }, .block_erase = spi_block_erase_d7, },*/ { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect_bp1_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Sanyo", .name = "LE25FU206", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FU206, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, .unlock = spi_disable_blockprotect_bp1_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Sanyo", .name = "LE25FU206A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FU206A, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Sanyo", .name = "LE25FU406B", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FU406B, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2300, 3600}, }, { .vendor = "Sanyo", .name = "LE25FU406C/LE25U40CMC", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FU406C, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual read (0x3B) and dual I/O (0xBB) supported */ .voltage = {2300, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW106", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW106, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {2 * 1024, 64} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ .unlock = spi_disable_blockprotect_bp1_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW203A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW203A, .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 1024} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW403A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW403A, .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256, 2 * 1024} }, .block_erase = spi_block_erase_db, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_default_welwip, .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW406A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW406A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW418A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW418A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW806", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW806, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Sanyo", .name = "LE25FW808", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW808, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 128} }, .block_erase = spi_block_erase_d7, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ .voltage = {2700, 3600}, }, { .vendor = "Sharp", .name = "LH28F008BJT-BTLZ1", .bustype = BUS_PARALLEL, .manufacture_id = SHARP_ID, .model_id = SHARP_LH28F008BJ__PB, .total_size = 1024, .page_size = 64 * 1024, .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 15} }, .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_sector_49lfxxxc, } }, .unlock = unlock_lh28f008bjt, .write = write_82802ab, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Sharp", .name = "LHF00L04", .bustype = BUS_FWH, /* A/A Mux */ .manufacture_id = SHARP_ID, .model_id = SHARP_LHF00L04, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, .tested = TEST_UNTESTED, .probe = probe_82802ab, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 15}, {8 * 1024, 8} }, .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = NULL, /* 30 D0, only in A/A mux mode */ }, }, .unlock = unlock_regspace2_uniform_64k, .write = write_82802ab, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Spansion", .name = "S25FL004A", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL004A, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL008A", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL008A, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL016A", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL016A, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL032A/P", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL032A, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL064A/P", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL064A, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL216, .total_size = 2048, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL127S-256kB", /* uniform 256kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 512, /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL127S-64kB", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, /* FIXME: we should distinguish the configuration on probing time like we do for AT45DB chips */ .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of 32 so-called "parameter sectors" with * opcode 0x20 which may be configured to be on top or bottom of the address * space. Trying to access an address outside these 4kB blocks does have no * effect on the memory contents, e.g. .eraseblocks = { {4 * 1024, 32}, {64 * 1024, 254} // inaccessible }, .block_erase = spi_block_erase_20, }, { */ .eraseblocks = { { 64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL128P......0", /* uniform 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL128P......1", /* uniform 256kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 32 so-called "parameter sectors" with * opcode 0x20. Trying to access an address outside these 4kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {4 * 1024, 32}, {64 * 1024, 254} // inaccessible }, .block_erase = spi_block_erase_20, }, { */ .eraseblocks = { { 64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL128S......1", /* uniform 256 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 512, /* supports 4B addressing */ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with * opcode 0x20. Trying to access an address outside these 4kB blocks does have no * effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {4 * 1024, 32}, {64 * 1024, 254} // inaccessible }, .block_erase = spi_block_erase_20, }, { */ /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs .eraseblocks = { {8 * 1024, 16}, {64 * 1024, 254} // inaccessible }, .block_erase = spi_block_erase_40, }, { */ .eraseblocks = { { 64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL129P......1", /* uniform 256 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL128, .total_size = 16384, .page_size = 256, /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {256 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL132K", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL132K, .total_size = 4096, .page_size = 256, /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 4096 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL164K", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL164K, .total_size = 8192, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 8192 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL204K", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL204, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL208K", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL208, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp3_srwd, .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Spansion", .name = "S25FL256S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL256, .total_size = 32768, .page_size = 256, /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_EAR7, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { /* This chip supports erasing of the 32 so-called "parameter sectors" with * opcode 0x20. Trying to access an address outside these 4kB blocks does * have no effect on the memory contents, but sets a flag in the SR. .eraseblocks = { {4 * 1024, 32}, {64 * 1024, 254} // inaccessible }, .block_erase = spi_block_erase_20, }, { */ .eraseblocks = { { 64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { { 64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 32768 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 32768 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, .wrea_override = 0x17, }, { .vendor = "Spansion", .name = "S25FL512S", .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, .model_id = SPANSION_S25FL512, .total_size = 65536, /* 512 Mb (=> 64 MB)) */ .page_size = 256, /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_NATIVE, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { { 256 * 1024, 256} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { { 65536 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 65536 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ .write = spi_chip_write_256, /* Multi I/O supported, IGNORE for now */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51001B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51001B, .total_size = 128, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {512, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51001T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51001T, .total_size = 128, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {512, 256} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51002B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51002B, .total_size = 256, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {512, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51002T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51002T, .total_size = 256, .page_size = 512, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {512, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51004B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51004B, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{F,S,V}29C51004T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C51004T, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{S,V}29C31004B", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C31004B, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "SyncMOS/MoselVitelic", .name = "{S,V}29C31004T", .bustype = BUS_PARALLEL, .manufacture_id = SYNCMOS_MVC_ID, .model_id = SM_MVC_29C31004T, .total_size = 512, .page_size = 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {1024, 512} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "TI", .name = "TMS29F002RB", .bustype = BUS_PARALLEL, .manufacture_id = TI_OLD_ID, .model_id = TI_TMS29F002RB, .total_size = 256, .page_size = 16384, /* Non-uniform sectors */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {16 * 1024, 1}, {8 * 1024, 2}, {32 * 1024, 1}, {64 * 1024, 3}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "TI", .name = "TMS29F002RT", .bustype = BUS_PARALLEL, .manufacture_id = TI_OLD_ID, .model_id = TI_TMS29F002RT, .total_size = 256, .page_size = 16384, /* Non-uniform sectors */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W25P16", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25P16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25P32", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25P32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4096 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25P80", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25P80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q128.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q128_V, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q128.V..M", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q128_V_M, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q128.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q128_W, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Winbond", .name = "W25Q128.JW.DTR", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q128_DTR, .total_size = 16384, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 512} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, }, { .vendor = "Winbond", .name = "W25Q16.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q16_V, .total_size = 2048, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q16.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q16_W, .total_size = 2048, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q20.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q20_W, .total_size = 256, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q256.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q256_V, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN | FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q256JV_M", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q256JV_M, .total_size = 32768, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_21, }, { .eraseblocks = { {4 * 1024, 8192} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 1024} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_dc, }, { .eraseblocks = { {64 * 1024, 512} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {32 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q32.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q32_V, .total_size = 4096, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q32.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q32_W, .total_size = 4096, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q40.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q40_V, .total_size = 512, .page_size = 256, /* supports SFDP */ /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, /* Multi I/O supported */ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q40BW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q40BW, .total_size = 512, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q40EW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q40EW, .total_size = 512, .page_size = 256, /* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q64.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q64_V, .total_size = 8192, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q64.W", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q64_W, .total_size = 8192, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q80_V, .total_size = 1024, .page_size = 256, /* supports SFDP */ /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25Q80BW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q80BW, .total_size = 1024, .page_size = 256, /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25Q80EW", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25Q80EW, .total_size = 1024, .page_size = 256, /* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */ }, { .vendor = "Winbond", .name = "W25X10", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 2} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X16", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X20", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X32", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X40", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X64", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W25X80", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = WINBOND_NEX_W25X80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, /* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ { .vendor = "Winbond", .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, /* used datasheet for the W29C011A */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, { .vendor = "Winbond", .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_w29ee011, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ .block_erasers = { { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, }, { .vendor = "Winbond", .name = "W29C020(C)/W29C022", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W29C040/P", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W29C512A/W29EE512", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W29C512A, .total_size = 64, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W29GL032CB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL032CB, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 63}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL032CH/L", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL032CHL, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 64} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL032CT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL032CT, .total_size = 4096, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 63}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL064CB", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL064CB, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {8 * 1024, 8}, {64 * 1024, 127}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL064CH/L", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL064CHL, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL064CT", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL064CT, .total_size = 8192, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {64 * 1024, 127}, {8 * 1024, 8}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W29GL128C", .bustype = BUS_PARALLEL, .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ .model_id = WINBOND_W29GL128CHL, .total_size = 16384, .page_size = 128 * 1024, /* actual page size is 16 */ .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec_29gl, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {128 * 1024, 128} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, }, }, .write = write_jedec_1, .read = read_memmapped, .voltage = {2700, 3600}, }, { .vendor = "Winbond", .name = "W39F010", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39F010, .total_size = 128, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39f010, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W39L010", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39L010, .total_size = 128, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {4 * 1024, 32} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {128 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39l010, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39L020", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39L020, .total_size = 256, .page_size = 4 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39l020, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39L040", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39L040, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PR, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39l040, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V040A", .bustype = BUS_LPC, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040a, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V040B", .bustype = BUS_LPC, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040b, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V040C", .bustype = BUS_LPC, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040C, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040c, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V040FA", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040FA, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = erase_block_jedec, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040fa, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V040FB", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040fb, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, { .vendor = "Winbond", .name = "W39V040FC", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V040C, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v040fc, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, { .vendor = "Winbond", .name = "W39V080A", .bustype = BUS_LPC, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V080A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v080a, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W39V080FA", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V080FA, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v080fa, .unlock = unlock_regspace2_uniform_64k, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, { .vendor = "Winbond", .name = "W39V080FA (dual mode)", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W39V080FA_DM, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .printlock = printlock_w39v080fa_dual, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, { .vendor = "Winbond", .name = "W49F002U/N", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W49F002U, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {128 * 1024, 1}, {96 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W49F020", .bustype = BUS_PARALLEL, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W49F020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PROBE, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {4500, 5500}, }, { .vendor = "Winbond", .name = "W49V002A", .bustype = BUS_LPC, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W49V002A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Winbond", .name = "W49V002FA", .bustype = BUS_FWH, .manufacture_id = WINBOND_ID, .model_id = WINBOND_W49V002FA, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10, .block_erasers = { { .eraseblocks = { {64 * 1024, 3}, {32 * 1024, 1}, {8 * 1024, 2}, {16 * 1024, 1}, }, .block_erase = erase_sector_jedec, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_block_jedec, } }, .write = write_jedec_1, .read = read_memmapped, .voltage = {3000, 3600}, }, { .vendor = "Zetta Device", .name = "ZD25D20", .bustype = BUS_SPI, .manufacture_id = ZETTADEVICE_ID, .model_id = ZETTADEVICE_ZD25D20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 64} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 8} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Zetta Device", .name = "ZD25D40", .bustype = BUS_SPI, .manufacture_id = ZETTADEVICE_ID, .model_id = ZETTADEVICE_ZD25D40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 128} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, }, { .vendor = "Unknown", .name = "SFDP-capable chip", .bustype = BUS_SPI, .manufacture_id = GENERIC_MANUF_ID, .model_id = SFDP_DEVICE_ID, .total_size = 0, /* set by probing function */ .page_size = 0, /* set by probing function */ .feature_bits = 0, /* set by probing function */ /* We present our own "report this" text hence we do not */ /* want the default "This flash part has status UNTESTED..." */ /* text to be printed. */ .tested = TEST_OK_PREW, .probe = probe_spi_sfdp, .block_erasers = {}, /* set by probing function */ .unlock = spi_disable_blockprotect, /* is this safe? */ .write = NULL, /* set by probing function */ .read = spi_chip_read, /* FIXME: some vendor extensions define this */ .voltage = {0}, }, { .vendor = "Programmer", .name = "Opaque flash chip", .bustype = BUS_PROG, .manufacture_id = PROGMANUF_ID, .model_id = PROGDEV_ID, .total_size = 0, .page_size = 256, /* probe is assumed to work, rest will be filled in by probe */ .tested = TEST_OK_PROBE, .probe = probe_opaque, /* eraseblock sizes will be set by the probing function */ .block_erasers = { { .block_erase = erase_opaque, } }, .write = write_opaque, .read = read_opaque, }, { .vendor = "AMIC", .name = "unknown AMIC SPI chip", .bustype = BUS_SPI, .manufacture_id = AMIC_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Atmel", .name = "unknown Atmel SPI chip", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Eon", .name = "unknown Eon SPI chip", .bustype = BUS_SPI, .manufacture_id = EON_ID_NOPREFIX, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Macronix", .name = "unknown Macronix SPI chip", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "PMC", .name = "unknown PMC SPI chip", .bustype = BUS_SPI, .manufacture_id = PMC_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "SST", .name = "unknown SST SPI chip", .bustype = BUS_SPI, .manufacture_id = SST_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "ST", .name = "unknown ST SPI chip", .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Sanyo", .name = "unknown Sanyo SPI chip", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Winbond", .name = "unknown Winbond (ex Nexcom) SPI chip", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .write = NULL, .read = NULL, }, { .vendor = "Generic", .name = "unknown SPI chip (RDID)", .bustype = BUS_SPI, .manufacture_id = GENERIC_MANUF_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .write = NULL, }, { .vendor = "Generic", .name = "unknown SPI chip (REMS)", .bustype = BUS_SPI, .manufacture_id = GENERIC_MANUF_ID, .model_id = GENERIC_DEVICE_ID, .total_size = 0, .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rems, .write = NULL, }, {0} }; const unsigned int flashchips_size = ARRAY_SIZE(flashchips);