src/linux-sata.c - main - githubmirror/efivar

src/linux-sata.c
245 строк8 KB
Peter Jones
cleanup: make clangd stop complaining about fix_coverity.h
17 мар 2026, 23:20
17 мар 2026, 23:2024a06ba
// SPDX-License-Identifier: LGPL-2.1-or-later
/*
 * libefiboot - library for the manipulation of EFI boot variables
 * Copyright 2012-2019 Red Hat, Inc.
 */

#include "fix_coverity.h" // IWYU pragma: keep

#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
#include <stdint.h>
#include <unistd.h>

#include "efiboot.h"

/*
 * Support for SATA (and in some cases other ATA) devices
 *
 * /dev/sda as SATA looks like:
 * /sys/dev/block/8:0 -> ../../devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda
 *                                                                ^     ^       ^ ^ ^ ^ ^ ^ ^
 *                                                                |     |       | | | | | | lun again
 *                                                                |     |       | | | | | target again
 *                                                                |     |       | | | | device again
 *                                                                |     |       | | | bus again
 *                                                                |     |       | | 64-bit lun
 *                                                                |     |       | 32-bit target
 *                                                                |     |       32-bit device
 *                                                                |     32-bit scsi "bus"
 *                                                                ata print id
 *
 * This is not only highly repetitive, but most of it is always 0 anyway.
 *
 * /dev/sda1 looks like:
 * /sys/dev/block/8:1 -> ../../devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda1
 *
 * sda/device looks like:
 * device -> ../../../0:0:0:0
 *
 * For all of these we're searching for a match for $PRINT_ID and then getting
 * the other info - if there's a port multiplier and if so what's the PMPN,
 * and what's the port number:
 * /sys/class/ata_device/dev$PRINT_ID.$PMPN.$DEVICE  - values "print id", pmp id, and device number
 * /sys/class/ata_device/dev$PRINT_ID.$DEVICE - values are "print id" and device number
 * /sys/class/ata_port/ata$PRINT_ID/port_no - contains off-by-one port number)
 *
 */

static ssize_t
sysfs_sata_get_port_info(uint32_t print_id, struct device *dev)
{
	DIR *d;
	struct dirent *de;
	uint8_t *buf = NULL;
	int rc;

	d = sysfs_opendir("class/ata_device/");
	if (!d) {
	        efi_error("could not open /sys/class/ata_device/");
	        return -1;
	}

	while ((de = readdir(d)) != NULL) {
	        uint32_t found_print_id;
	        uint32_t found_pmp;
	        uint32_t found_devno = 0;

	        if (!strcmp(de->d_name, ".") || !strcmp(de->d_name, ".."))
	                continue;

	        rc = sscanf(de->d_name, "dev%d.%d.%d", &found_print_id,
	                    &found_pmp, &found_devno);
	        if (rc < 2 || rc > 3) {
	                closedir(d);
	                errno = EINVAL;
	                return -1;
	        } else if (found_print_id != print_id) {
	                continue;
	        } else if (rc == 3) {
	                /*
	                 * the kernel doesn't ever tell us the SATA PMPN
	                 * sentinal value, it'll give us devM.N instead of
	                 * devM.N.O in that case instead.
	                 */
	                if (found_pmp > 0x7fff) {
	                        closedir(d);
	                        errno = EINVAL;
	                        return -1;
	                }
	                dev->sata_info.ata_devno = 0;
	                dev->sata_info.ata_pmp = found_pmp;
	                break;
	        } else if (rc == 2) {
	                dev->sata_info.ata_devno = 0;
	                dev->sata_info.ata_pmp = 0xffff;
	                break;
	        }
	}
	closedir(d);

	rc = read_sysfs_file(&buf, "class/ata_port/ata%d/port_no",
	                     print_id);
	if (rc <= 0 || buf == NULL)
	        return -1;

	rc = sscanf((char *)buf, "%d", &dev->sata_info.ata_port);
	if (rc != 1)
	        return -1;

	/*
	 * ata_port numbers are 1-indexed from libata in the kernel, but
	 * they're 0-indexed in the spec.  For maximal confusion.
	 */
	if (dev->sata_info.ata_port == 0) {
	        errno = EINVAL;
	        return -1;
	} else {
	        dev->sata_info.ata_port -= 1;
	}

	return 0;
}

static ssize_t
parse_sata(struct device *dev, const char *path, const char *root UNUSED)
{
	const char *current = path;
	uint32_t print_id;
	uint32_t scsi_bus, tosser0;
	uint32_t scsi_device, tosser1;
	uint32_t scsi_target, tosser2;
	uint64_t scsi_lun, tosser3;
	int pos0 = -1, pos1 = -1;
	int rc;

	debug("entry");
	if (is_pata(dev)) {
	        debug("This is a PATA device; skipping.");
	        return 0;
	}

	/* find the ata info:
	 * ata1/host0/target0:0:0/0:0:0:0
	 *    ^dev  ^host   x y z
	 */
	debug("searching for ata1/");
	rc = sscanf(current, "%nata%"PRIu32"/%n", &pos0, &print_id, &pos1);
	debug("current:'%s' rc:%d pos0:%d pos1:%d\n", current, rc, pos0, pos1);
	dbgmk("         ", pos0, pos1);
	/*
	 * If we don't find this one, it isn't an ata device, so return 0 not
	 * error.  Later errors mean it is an ata device, but we can't parse
	 * it right, so they return -1.
	 */
	if (rc != 1)
	        return 0;
	current += pos1;
	pos0 = pos1 = -1;

	debug("searching for host0/");
	rc = sscanf(current, "%nhost%"PRIu32"/%n", &pos0, &scsi_bus, &pos1);
	debug("current:'%s' rc:%d pos0:%d pos1:%d\n", current, rc, pos0, pos1);
	dbgmk("         ", pos0, pos1);
	if (rc != 1)
	        return -1;
	current += pos1;
	pos0 = pos1 = -1;

	debug("searching for target0:0:0:0/");
	rc = sscanf(current, "%ntarget%"PRIu32":%"PRIu32":%"PRIu64"/%n",
	            &pos0, &scsi_device, &scsi_target, &scsi_lun, &pos1);
	debug("current:'%s' rc:%d pos0:%d pos1:%d\n", current, rc, pos0, pos1);
	dbgmk("         ", pos0, pos1);
	if (rc != 3)
	        return -1;
	current += pos1;
	pos0 = pos1 = -1;

	debug("searching for 0:0:0:0/");
	rc = sscanf(current, "%n%"PRIu32":%"PRIu32":%"PRIu32":%"PRIu64"/%n",
	            &pos0, &tosser0, &tosser1, &tosser2, &tosser3, &pos1);
	debug("current:'%s' rc:%d pos0:%d pos1:%d\n", current, rc, pos0, pos1);
	dbgmk("         ", pos0, pos1);
	if (rc != 4)
	        return -1;
	current += pos1;

	rc = sysfs_sata_get_port_info(print_id, dev);
	if (rc < 0)
	        return -1;

	dev->sata_info.scsi_bus = scsi_bus;
	dev->sata_info.scsi_device = scsi_device;
	dev->sata_info.scsi_target = scsi_target;
	dev->sata_info.scsi_lun = scsi_lun;

	if (dev->interface_type == unknown)
	        dev->interface_type = sata;

	debug("current:'%s' sz:%zd\n", current, current - path);
	return current - path;
}

static ssize_t
dp_create_sata(struct device *dev,
	       uint8_t *buf, ssize_t size, ssize_t off)
{
	ssize_t sz = -1;

	debug("entry buf:%p size:%zd off:%zd", buf, size, off);

	if (dev->interface_type == ata || dev->interface_type == atapi) {
	        sz = efidp_make_atapi(buf + off, size ? size - off : 0,
	                              dev->sata_info.ata_port,
	                              dev->sata_info.ata_pmp,
	                              dev->sata_info.ata_devno);
	        if (sz < 0)
	                efi_error("efidp_make_atapi() failed");
	} else if (dev->interface_type == sata) {
	        sz = efidp_make_sata(buf + off, size ? size - off : 0,
	                             dev->sata_info.ata_port,
	                             dev->sata_info.ata_pmp,
	                             dev->sata_info.ata_devno);
	        if (sz < 0)
	                efi_error("efidp_make_sata() failed");
	} else {
	        return -EINVAL;
	}

	return sz;
}

enum interface_type sata_iftypes[] = { sata, unknown };

struct dev_probe HIDDEN sata_parser = {
	.name = "sata",
	.iftypes = sata_iftypes,
	.flags = DEV_PROVIDES_HD,
	.parse = parse_sata,
	.create = dp_create_sata,
};

// vim:fenc=utf-8:tw=75:noet